A 0D phenomenological model using detailed tabulated chemistry methods to predict diesel combustion heat release and pollutant emissions

SAE Technical Papers

Volumn , Issue , 2011, Pages

  Bernard, Guillaume ^a   Lebas, Romain ^a   Demoulin, François Xavier ^b  

^a IFP ENERGIES NOUVELLES   (France)

^b CORIA ^*

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; COMPUTER SOFTWARE; DIGITAL STORAGE; ENGINE PISTONS; EXHAUST GAS RECIRCULATION; IGNITION; NITROGEN OXIDES; PHASE EQUILIBRIA; PISTONS; POLLUTION; POWERTRAINS; TURBULENCE;

AFTER TREATMENT DEVICES; ENGINE CONTROL STRATEGY; EXHAUST GAS RECIRCULATION (EGR); HOMOGENEOUS CHARGE COMPRESSION IGNITION; LOW-DIMENSIONAL MANIFOLDS; MIXING DISTRIBUTIONS; PHENOMENOLOGICAL MODELING; POLLUTANTS EMISSIONS;

THREE DIMENSIONAL COMPUTER GRAPHICS;

EID: 85072487417     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: None     Document Type: Conference Paper

References (38)

1. Neely, G., Sasaki, S., Huang, Y., Leet, J., and Stewart, D., "New Diesel Emission Control Strategy to Meet US Tier 2 Emissions Regulations," SAE Technical Paper 2005-01-1091, 2005, doi: 4271/2005-01-1091.
2. Wiebe, I.I,. Brennverlauf und kreisprose(beta) von verbrennungsmotoren. In VEB-Verlag Technik, 1970.
3. Hiroyasu, H., Kadota, T., and Arai, M.,. Development and use of a spray combustion modelling to predict diesel engine efficiency and pollutant emissions. Bulletin of the JSME, 26, 1983.
4. Barba, C., Burkhardt, C., Boulouchos, K., and Bargende, M., "A Phenomenological Combustion Model for Heat Release Rate Prediction in High Speed DI Diesel Engines with Commonrail Injection," SAE Technical Paper 2000-01-2933, 2000, doi: 10.4271/2000-01-2933.
5. Colin, O., and Benkenida, A.,. The 3-zones extended coherent flame model (ecfm3z) for computing premixed/diffusion combustion. Oil and Gas, Science and Technology, 59: 593, 2004.
6. Dulbecco, A., Lafossas, F-A., and Poinsot, T., "A 0d Phenomenological Approach to Model Diesel HCCI Combustion with Multi-Injection Strategies Using Probability Density Functions and Detailed Tabulated Chemistry," SAE Int. J Engines 2 (1): 548-568, 2009, doi: 10.4271/2009-01-0678.
7. Dulbecco, A.,. A new 0D Diesel HCCI combustion model derived from a 3D CFD approach with detailed tabulated chemistry. Oil & gas Science and Technology, 2008.
8. Mauviot, G., Albrecht, A., and Poinsot, T., "A New 0D Approach for Diesel Combustion Modelling Coupling Probability Density Function with Complex Chemistry," SAE Technical Paper 2006-01-3332, 2006, doi: 10.4271/2006-01-3332.
9. Siebers, D.L., "Liquid-Phase Fuel Penetration in Diesel Sprays," SAE Technical Paper 980809, 1998, doi: 10.4271/980809.
10. Naber, J., and Siebers, D., "Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays," SAE Technical Paper 960034, 1996, doi: 10.4271/960034.
11. Launder, B.E., and Spalding, D.B.,. The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering, 3: 269, 1974.
12. Pope, S.B,. Pdf methods for turbulent reactive flows. Prog. Energy Combust. Sci, Vol 11, pp. 119-192., 1985.
13. Lefebvre, A.H., (1989) Drop evaporation, in Atomization and sprays, Hemisphere Publishing Corporation, United States of America.
14. Siebers, D., "Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization," SAE Technical Paper 1999-01-0528, 1999, doi: 10.4271/1999-01-0528.
15. Park, S.W., Suh, H.K., and Lee, C.S., (2005) E-ect of a split injection on spray characteristic for a Common-Rail type Diesel injection system. International Journal of Automotive Technology, 6, 4, 315-322.
16. Zhang, Y., Nishida, K., and Yoshizaki, T., (2003) Characterization of droplets and vapor concentration distributions in split-injection Diesel sprays by processing UV and visible images. JSME International Journal, Series B, 46, 1, 100-108.
17. Li, T., Nishida, K., Zhang, Y., Onoe, T., and Hiroyau, H., (2005) Enhancement of stratifed charge for DISI engines through split injection (Effect and its mechanism). JSME International Journal, Series B, 48, 4, 687-694.
18. Chmela, F., and Orthaber, G., "Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion," SAE Technical Paper 1999-01-0186, 1999, doi: 10.4271/1999-01-0186.
19. Dopazo, C., "Développements récents dans les méthodes PDF" écoulements turbulents Réagissant, Libby, PA, Williams, FA, EDS, Academic Press, 1994.
20. Libby, P. A., & Williams, F. A., (Eds.) 1994 Turbulent Reacting Flows. Academic.
21. Domingo, P.,. Large-eddy simulation of a lifted methane-air jet flames in a vitiated coflow. Combustion and flame, 152: 415, 2008.
22. Gicquel, O., Darabiha, N., and Thevenin, D.,. Laminar premixed hydrogen/air counterflow flame simulations using flame prolongation of ildm with differential diffusion. Proc. Combust. Inst, 28: 1901, 2000.
23. Pera, C., Jay, S., and Colin, O.,. Tabulation de polluants par la methode fpi et de la phase 3 de l'étude gsm del 2006-fpi moteur. Livrables de la phase 2 de l'étude GSM E2.3, 2006.
24. Galpin, J.,. Modélisation LES de la combustion avec une prise en compte des effets de cinétique détaillée et en perspective d'application moteur. PhD thesis, 2007.
25. Vervish, L., Hauguel, R., Domingo, P., and Rullaud, M.,. Three facets of turbulent combustion modelling: Dns of premixed v-flame, les of lifted nonpremixed flame and rans of jetflame. Journal of Turbulence, 5, 2004.
26. Anderlhor, J.M., Bounaceur, R., Pires Da Cruz, A., and Battin-Leclerc, F.,. Modeling of autoignition and no sensitization for the oxidation of ic engine surrogate fuels. Combustion and Flame, 2008.
27. Zeldovitch, Y.B.,. Acta physico chim. Prog. Energy Combust. Sci, 21: 577, 1946.
28. Lavoie, G.A., Heywood, J.B., and Keck, J.C.,. Experimental and theoretical investigation of nitric oxyde formation in internal combustion engines. Combust. Sci. Technol., 1: 841, 1971.
29. Ihme, M., and Pitsch, H.,. Modeling of radiation and nitric oxide formation in turbulent non premixed flames using a flamelet/progress variable formulation. Phys. Fluids, 20, 2008.
30. Godel, G., Domingo, P., and Vervisch, L.,. Tabulation of nox chemistry for large-eddy simulation of non-premixed turbulent flames. Proceedings of the Combustion Institute, 32: 1555, 2009.
31. Michel, J.B.,. Modélisation de la turbulence d'un mélange hétérogène en auto-inflammatin en vue de l'mplication à la simulation des moteurs Diesel. PhD thesis, Ecole Centrale Paris.
32. Walter, B., and Gatellier, B., "Development of the High Power NADI™ Concept Using Dual Mode Diesel Combustion to Achieve Zero NOx and Particulate Emissions," SAE Technical Paper 2002-01-1744, 2002, doi: 10.4271/2002-01-1744.
33. IFP Energies nouvelles. IFP-C3D Source Code. IFP Energies nouvelles internal files, 2006.
34. Vatistas, N., and Marconi, P.F.,. The IEM mixing model in exothermic reaction. Chemical Engineering Science, Vol 47, No. 7, pp. 727-1731, 1992.
35. Cassiani, M., Radicchi, A., Albertson, J.D., Giostra, U.,. An efficient algorithm for scalar PDF modelling in incompressible turbulent flow; numerical analysis with evaluation of IEM and IECM micro mixing models. Journal of Computational Physics 223, 519-550, 2007.
36. Fournier, M.-C, Falk, L., and Villermaux, J.,. A new parallel competing reaction system for assessing micromixing efficiency-Determination of micromixing time by a simple mixing model. Chemical Engineering Science, Vol. 51, No. 3, pp. 5187-5192, 1996.
37. Hammoudi, M., Belhamel, M., and Si-Ahmed, E.K.,. Caractérisation locale des mélanges de fluides à l'aide d'une méthode non intrusive (la vélocimétrie ultrasonore pulsée). Revue des Energies Renouvelables, Vol. 11, No 4, pp. 557-566, 2008
38. Moon, S., Matsumoto, Y., and Nishida, K., "Entrainment, Evaporation and Mixing Characteristics of Diesel Sprays around End-of-Injection," SAE Technical Paper 2009-01-0849, 2009, doi: 10.4271/2009-01-0849.