Friction in sheet metalworking

SAE Technical Papers

Volumn , Issue , 1997, Pages

  Schey, John A ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; METAL WORKING;

ALUMINUM ALLOY SHEET; COATED SHEETS; MINIMUM REQUIREMENTS; SHEET METALWORKING; TEST CONDITION;

ALUMINUM COATINGS;

EID: 85072471607     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/970712     Document Type: Conference Paper

References (191)

1. Schey, J.A., Tribology in Metalworking: Friction, Lubrication and Wear, American Society for Metals, Metals Park, OH, 1983.
2. Kalpakjian, S., "Recent Progress in Metal Forming Tribology" CIRP, 34 / 2, 1985, 1-8.
3. Bay, N., and Wanheim T.,: "Contact Phenomena under Bulk Plastic Deformation Conditions" ATP 1990, 1677-1691.
4. Kawai, N., and Dohda K., "Tribology in Metal Forming Processes" ATP 1984, 145-156.
5. Mizuno, T., "Present Issue of Lubrication Mechanism" ATP 1990, 1703-1710.
6. Wilson, W.R.D., "Mixed Lubrication in Metalforming Processes" ATP 1990,. 1667-1676.
7. Schey, J.A., "Material Aspects in Adhesion, Galling, and Adhesive Wear" in Strength of Metals and Alloys (ICSMAT), Pergamon, Oxford, 1986, 1983-2005.
8. Reid, J.V., and Schey J.A., "Dependence of Adhesion on Surface Hardness" Wear, 118, 1987, 113-125.
9. Black, A.J., Kopalinsky E.M., and Oxley P.L.B., "Asperity Deformation Models for Explaining the Mechanisms Involved in Metallic Sliding Friction and Wear - a Review" Proc. Instn. Mech. Engs., 207, 1993, 335-353.
10. Durham, D.R., von Turkovich B.F., and Assempoor A., "Modeling the Frictional Boundary Condition in Material Deformation" CIRP, 40, 1991, 235-238.
11. Ramaekers, J.A.H., and Kals J.A.G., "Mathematical Representation of Friction in Metal Forming Analysis" CIRP, 35, 1986, 137-140.
12. Sheu, S., and Wilson W.R.D., "Flattening of Workipece Asperities in Metal Forming" NAMRC 1983, 172.
13. Schey, J.A., "Friction Laws in Metal Forming Tribology" ATP 1987, 873-882.
14. Ike, H., and Makinouchi A., "Effect of Lateral Tension and Compression on Plane Strain Flattening Processes of Surface Asperities Lying over a Plastically Deformable Bulk" Wear, 140, 1990, 17-38.
15. Emmens, D., "Influence of Dimensions on the Reliability of Measured Coefficients of Friction" IDDRG WG 1995.
16. Kataoka, S., Kihara J., and Aizawa T., "On the Effect of Additives or Thin Film to Micropool Induced Lubrication in Plastic Working" ATP 1990, 575-580.
17. Schedin, E., "Galling Mechanisms in Sheet Forming Operations" Wear, 179, 1994, 123-128.
18. Kudo, H., and Azushima A., "Interaction of Surface Microstructure and Lubricant in Metal Forming Tribology" ATP 1987, 273-284.
19. Avitzur, B., "Interrelation between the Asperities and the Trapped Lubricant and Their Effect on Friction Behavior" Friction and Material Characterization, MD-10, ASME, 1988, 1-11.
20. Felder, I., and Samper V., "Experimental Study and Theoretical Interpretation of the Frictional Mechanisms in Steel Sheet Forming" Wear, 178, 1994, 85-94.
21. Ike H., "Properties of Metal Sheets with 3-D Designed Surface Microgeometry Prepared by Special Rolls" J. Mater. Proc. Techn., 60, 1996, 363-378.
22. Wang, Z., Kondo K., Mori T., "A Consideration of Optimum Conditions for Surface Smoothing Based on Lubricating Mechanisms in Ironing Process" J. Eng. Ind., 117, 1995, 351-356.
23. Azushima, A., "Direct Observation of Contact Behavior to Interpret the Pressure Dependence of Coefficient of Friction in Sheet Metal Forming" CIRP, 44, 1995, 209-212.
24. Ike, H., "Observation of Loaded Interface of Lubricated Asperities by Contact Microscope and Modelling of Mixed Lubrication in Plastic Working Processes" Eurotrib 89, 162 ' 167.
25. Hector, L.G., and Sheu S., "Focused Energy Beam Work Roll Surface Texturing Science and Technology" J. Mater. Proc. Manuf. Sci., 2, 1993, 66-117.
26. Bulthe R., De Mare C., De Graef L., and Gadeyne Y., "Sibetex: The First Determinstic Steel Sheet Surface Texture" in 37th Metal Working and Sheet Processing Conf., ISS, Vol. 33, 1996, 179-185.
27. Steinhoft, K., Rasp W., and Pawelski O., "Development of Deterministic-Stochastic Surface Structure to Improve the Tribological Conditions of Sheet Forming Processes" J. Mat. Proc. Techn., 60, 1996, 355-361.
28. Whitehouse, D.J., "Comparison Between Stylus and Optical Methods for Measuring Surfaces" CIRP, 37, 1988, 649-653.
29. Dong, W.P., Sullivan P.J., and Stout K.J., "Comprehensive Study of Parameters for Characterizing Three-Dimensional Surface Topography" Wear, 178, 1994, 45-60.
30. Klimczak, T., Dautzenberg J.H., Kals J.A.G., "On the Roughening of a Free Surface During Sheet Metal Forming" CIRP, 37, 1988, 267-270.
31. Nivatvongs, K., Cheng H.S., Ovaert T.C., and Wilson W.R.D., "Influence of Surface Topography on Low-Speed Asperity Lubrication Breakdown and Scuffing" Wear, 143, 1991, 137-148.
32. Doege, E., Laackman B., Kischnick B., "Fractal Geometry Used for the Characterization of Sheet Surfaces" CIRP, 44, 1995, 197-200.
33. Imanaka, M., Kato T., Hashimoto O., Hishida Y., and Ujihara S., "Development of Laser-Textured Dull Steel Sheets with Superior Press Formability" SAE Paper 930808, SAE 1993, 231-239.
34. Meier, B.T., Reissner J., and Bloeck M., "Effect of the Surface Quality of the Workpiece Material on the Frictional Behaviour During Sheet Forming" IDDRG 1990, 43-52.
35. Vermeulen, M., "Screening Test for the Tribological Behaviour of Deep Drawing Steel Sheet" Eurotrib 93, Vol. 1, 162-167.
36. Nihill, T.J., and White J.L., "Thermograph - An Aid to Press Shop Process Control" IDDRG 1988, 17-24.
37. Penazzi, L., Yang G., Levaillant C., Le Floch A., "Assessment of Thermal Effect in the Sheet Metal Forming Process" IDDRG 1996, 287-294.
38. Leighton, D.E., and Lee D., "The Effect of Tooling Temperature on the Formability of Sheet Steel" J. Mater. Proc. Technol, 45, 1994, 577-582.
39. Kumpulainen, J.O., Ranta-Eskola A.J., Rintimaa R.H.O., "Effect of Temperature on Deep Drawing of Sheet Metals" J. Eng. Mat. Techn., 105, 1983, 119-127.
40. Klimczak, T., and Jonasson M., "Analysis of Real Contact Area and Change of Surface Texture on Deep Drawn Steel Sheets" Wear, 179, 1994, 129-135.
41. von Stebut, J., "Modification of a Surface Profile's Horizontal Spacing During Strip Drawing" Wear, 118, 1987, 329-340.
42. Schey, J. A., "Causes of Random Variations of Friction in Sheet Metalworking" Lubric. Eng., 50, 1994, 821-829.
43. Monfort, G., Defourny J., and Bragard A., "Progress in the Roughness Texture of the Cold Rolled Steel Sheets Related to Deep Drawing and Forming" IDDRG 1988, 91-98.
44. Peyrac, C., "A Study of the Galling Mechanisms of Pickled Hot Rolled Sheets. Influence of the Surface Roughness" IDDRG WG 1991.
45. Emmens, W.C., "The Influence of Surface Roughness on Friction" IDDRG 1988, 63-70.
46. Muller, R., "Evaluation of the Properties of Sheet with Lasertex Surface Texture" IDDRG 1988, 99-107.
47. Reissner, J., "Tribology During Deep Drawing-Friction, Lubrication, Testing of Lubricants" IDDRG 1984, 456-466.
48. Haar, R., ter, et al, "Special Friction Tester for Measurements under Sheet Metal Forming Contact Conditions" in Sheet Metal 96, University of Twente, Holland, 1996, 357-366.
49. Schey, J.A., "Speed Effects in Drawbead Simulation" J. Mater. Proc. Technol., 57, 1996, 146-154.
50. Keeler, S. P., "Evaluating the Lubricity of Press Shop Lubricants on Various Types of Galvanized Steels" in Proc. 28th Mechanical Working and Steel Processing Conf., Pittsburgh, PA, 1986, AIME, 193-198.
51. Nine, H.D., "Draw Bead Forces in Sheet Metal Forming" in Mechanics of Sheet Metal Forming: Behavior and Deformation Analysis, Koistinen D., and Wang N.M., (eds.), Plenum, New York, 1978, 179-211.
52. Abe, H., Hira T., and Yarita I., "Frictional Behavior in Sheet Forming of Coated Steels" IDDRG 1990, 32-39.
53. Brazier, W.G., and Thompson R.W.,: "The Effects of Zinc Coatings, Die Materials and Lubricants on Sheet Metal Formability" SAE Paper 860434.
54. Dohda, K., Wang Z., Yokoi N., and Haruyama Y., "Effects of Average Traction Velocity of Lubricant and Relative Sliding Velocity on Friction Behavior" ATP 1996, 107-110.
55. Kumpulainen, J.O., "Factors Influencing Friction and Galling Behavior of Sheet Metal" IDDRG 1984, 476-490.
56. Luguan, H., Xianguo H., and Longying J., "The Study of Mild Steel Sheet Friction Condition and Its Influencing Factors in Deep Drawing" Eurotrib 89, 406-411.
57. Muraki, M., Ide H., Tagawa K., and Nakamura T., "Effect of Lubricants on Deep Drawability of Zinc-Coated Steel Sheets" Eurotrib 1993, 132-137.
58. Siegert, K., and Simon J., "Frictional and Forming Behavior of Zinc-Coated Steel Sheets" SAE Paper 960818, SAE 1996, 103-114
59. Schey, J.A., and Dalton G.M., "Lubrication Mechanisms in the Forming of Galvanized Steel Sheet" J. Mater. Working Technol., 24, 1990, 365-374.
60. Fischer, R.F., and Schey J.A., "Tribological Factors Affecting the LDH Test" SAE Paper 920434, SAE 1992, 57-61.
61. Wang, W., and Wagoner R.H., "A Realistic Friction Test for Sheet Forming Operations" SAE Paper 930807, SAE 1993, 223-230.
62. Zheng, R., and Overby D., "Strip Friction Experimental Study on Galvanized Steel Sheet" IDDRG 1988, 85-90
63. Dohda, K., Kashiwaya S., Wang Z., and Naoi M., "Tribo- Characteristics of Galvanized Sheet Sted Evaluated by Strip-Ironing Type Tribometer" NAMRC 1994, 401-406.
64. Rault, D., and Etringer M., "Relative Sheet/Tool Velocity: Its Influence on Friction and Forming Behavior of Coated Steels" IDDRG 1986, 456-457.
65. Monfort, G., and Defourny J., "Tribological Factors in the Stamping of Coated and Uncoated Steel Sheets" IDDRG 1990, 197-206.
66. Nakamura, S., Yoshida M., and Nishimoto A., "Frictional characteristics of coated sted sheets" IDDRG 1988, 77-83.
67. Siekirk, J.F., "Process Variable Effects on Sheet Metal Quality" J. Appl. Metalwork., 4, 1986, 262-269.
68. Kihara, J., "Tribological Problems Relating with Physical and Chemical Interaction Among the Tool, the Workpiece and the Lubricant" ATP 1990, 1693-1703.
69. Kawai, N., and Dohda K., "A New Lubricity Evaluation Method for Metal Forming by a Compression-Twist Type Friction Testing Machine" J. Tribol., 109, 1987, 343-349.
70. Wilson, W.R.D., Malkani H.G., and Saha P.K., "Boundary Friction Measurements Using a New Sheet Metal Forming Simulator" NAMRI 1991, 37-42.
71. Schey, J. A., "Interactions of Lubricants and Zinc Coatings" IDDRG 1994, 177-188.
72. Col, A., and Terreaux P., "Prelubs: Advantages and Drawbacks" IDDRG 1996, 505-514.
73. Hunz, R., Collison C., and McCrea K., "Lubricant Performance of Various EP Compounds as Measured by the SLT Horizontal Draw-Bead Simulator" Lubric. Eng., 1990, 549-552.
74. Hashimoto, K., Ohwue T., and Takita M., "Effect of Temperature, Die Materials, and Lubricant on Sliding Behaviour of Various Coated Steel Sheets" IDDRG 1990, 153-160.
75. Wall, C. G., "The Laboratory Evaluation of Sheet Metal Forming Lubricants" Lubric. Eng., 40, 1984, 139-147.
76. Hirasaka, M., "Effects of Die Temperature and Lubricants on Galling Behaviour" J. JSTP, 28, No. 319, 1987, 799-804 (Japanese).
77. Schmid, S.R., and Wilson W.R.D., "Lubrication Mechanisms for Oil-In-Water Emulsions" Lubric Eng., 52, 1996, 168-175.
78. von Stebut, J., and Perry D., "Strip Drawing of Boundary Lubricated Uncoated and Precoated Steel Sheets: Friction Response and Metal Transfer as a Function of Tool Surface Parameters" Presented at IDDRG 1988, Dearborn, MI.
79. Dalton, G.M., and Schey J.A., "Effect of Bead Finish Orientation on Friction and Galling in the Drawbead Test" SAE Paper 920632, SAE 1992, 123-133.
80. Azushima, A., "Development of a New Simulation Method by Means of Tribo-Simulator Controlled by Computer for Sheet MetalForming" ATP 1996, 879-882.
81. Emmens, W.C., and Monfort G., "The Influence of Process Conditions and Surface Characteristics on Friction at Low Pressure" ATP 1990, 1277-1284.
82. Michler, J.R., and Weinmann K.J., "Variations of Friction in a Strip Test Apparatus with Controllable Drawbead Penetration" SAE Paper 950698, SAE 1995, 65-73.
83. Schedin, E., "Analysis of Friction Conditions During Sheet Forming" IDDRG WG 1993.
84. Kato, T., Iizuka E., Hira T., Furukimi O., Obara T., "Effects of Strength and Surface Roughness of Steel Sheets on Frictional Behaviour During Sheet Forming" IDDRG 1996, 497-504.
85. Kotchman, D.P., Kim I., and Lee D., "Determination of Frictional Behavior in Sheet Metals Using Orthogonal Arrays" IDDRG WG 1991.
86. Schedin, E., and Thuvander A., "Surface Asperity Deformation During Sheet Forming" ATP 1990, 1269-1275.
87. Krauss, G., and Matlock D.K., (eds.), Zinc-Based Coating Systems: Metallurgy and Performance, The Metallurgical Society of AIME, Warrendale, PA, 1990.
88. Marder, A.R., "Microstructural Characterization of Zinc Coatings" in [87], 55-82.
89. Scheers, J., De Cooman B.C., Vermeulen M., "The Frictional Properties of Galvannealed Steel Sheets" IDDRG 1996, 515-520.
90. Deits, S. H., and Matlock D.K., "Formability of Coated Sheet Steels: ah Analysis of Surface Damage Mechanisms" in [87], 297-317.
91. Miura, K., Hira T., and Kato T., "Galvannealed Steel with Superior Press Formability and Image Clarity" IDDRG 1994, 85-89.
92. Nakamura, S., Yoshida M., Nishimoto A., and Ono T., "Study of Method of Evaluation for Frictional Characteristics in Coated Steel Sheets" IDDRG 1990, 379-386.
93. Meuleman, D.J., Denner S.G., and Cheng F.L., "The Effect of Zinc Coatings on the Formability of Automotive Sheet Steels" SAE Paper 840370.
94. Shimada, Y., et al,: "Formability of Coated Steel Sheets Evaluated by Actual Stamping Test and Laboratory Simulation Tests" Japanese DDRG, IDDRG 1992, 16-23.
95. Iwaya, J., and Miyahara M.,: "The Influence of Surface Conditions of Hot-Dip Galvannealed Steel Sheet on the Drawing Force During Deep Drawing" IDDRG 1992, 95-102.
96. Nakamura, S., Itoh Y., Morishita T., Yamanaka Y., "Lubricity Improvement of Galvananneled Steel Sheet by Surface Modification and Application of Lubricant Oil" IDDRG 1990, 48-55.
97. Reitzle, W., Schlicht H.P., Drecker R., and Fischer F., "The Tribology of Coated Sheets in Deep Drawing" Stahl u. Eisen, 103, 1983, 801-806 (German).
98. Dane, C.M., "Multipass Friction Tests on Zinc Zoated Sheet to Simulate Galling Behaviour" IDDRG 1994, 211-221.
99. Masarczyk, P., and Muller R.,: "Comparison of Frictional and Abrasion Behaviour of Different Electro-Galvanized, Hot-Dip Galvanized and Galvannealed Steel Sheets" IDDRG WG 93.
100. Kim, Y., and Choi W.,: "New Evaluation Method for Frictional Characteristics of Zinc Coated Steel Sheets" IDDRG 1992, 368-375.
101. Morishita, T., and Horita T., "Effect of Coating Layer and Lubricant Oil on the Formability of Coated Steel Sheet" IDDRG 1990, 207-214.
102. Iwaya, J., Okano Y., and Miyahara M., "A Study on the Frictional Behavior of Coated Steel Sheets" IDDRG 1990, 189-196.
103. Kimoto, M., Sakane T., Tsuda T., and Hayashi Y., "Sliding Lubricity of Zn-Ni Alloy Electroplated Steel Sheets" J. JSTP, 30, 1989, 1639-1645 (Japanese).
104. Schedin, E., and Monfort G., "Influence of Lubricant Compositions on the Friction Conditions During Sheet Forming" in Proc. Garvatech '92, Verlag Stahleisen, 1992.
105. Kato, T., et al,: "Effect of Zn-Ni Plating on Mechanical Properties and Press Formability of Sheet Steels" IDDRG 1990, 347-353.
106. Rangarajan, V., Giallourakis N., Matlock D.K., and Krauss G., "The Effect of Texture on Deformation of Zinc Coatings" J. Mater. Shaping Technol. 6, 1989, 217-227.
107. Makimattila, S., and Ristolainen E.,: "Effect of Surface Chemical Condition on the Frictional Properties of Hot-Dip Galvanized Steel Sheets" IDDRG 1986, 261-270.
108. Keeler, S.P., and Dwyer T.E., "Frictional Characteristics of Galvanized Steels Evaluated with a Draw Bead Simulator" SAE Paper 860433.
109. Keeler, S.P., Nine H.D., and Siekirk J.F., "Formability Criteria for Selecting Sheet Metal Lubricants" SAE Paper 880366.
110. Kim, J.K., and Thomson P.F.,: "Friction and Stress Distribution in Coated Steel Sheet During Forming" J. Mat. Proc. Techn., 21, 1990, 29-42.
111. Kolnberger, S., and Faderl J.,: "A New Method for Evaluation of the Friction Coefficient of Coated and Uncoated Steel Sheet" IDDRG WG 1993.
112. Hylton, T.A., Van Tyne C.J., and Matlock D.K.,: "Frictional Behavior of Electrogalvanized Sheet Steels" SAE Paper 930809, SAE 1993, 241-253.
113. Shaffer, S.J., Nojima W.E., Skarpelos P.N., and Morris J.W. Jr., "Research on the Metallurgical Determinants of Formability in Electrogalvanized Sheet" in [87], 251-261.
114. DeBoeck, A., Vanthournout M., Van der Hoeven J.M., "The Influence of Texture on the Deformation Behaviour of Electrodeposited ZincCoatings" IDDRG 1994, 55-66.
115. Shaffer, S.J., Philip A.M., and Morris, J.W. Jr., "Micromechanisms of Surface Friction in Zinc Electrogalvanized Steel Sheets" Proc. Galvatech. 89, Tokyo, Japan, 1989, 345-350.
116. Lindsay, J.H., Paluch R.F., Nine H.D., Miller V.R., and O'Keefe T.J.,: "The Interaction Between Electrogalvanized Zinc Deposit Structure and the Forming Properties of Sheet Steel" Plating and Surface Finishing, 1989 March, 62-69.
117. Rangarajan, V., Matlock D.K., and Kraus G., "The Effects of Coating Properties on the Frictional Response" in [87], 263-280.
118. Pak, S.-W., and Meshii M., "Structure-Mechanical Property Relation in Zinc Electrogalvanized Coatings" in [87], 357-369.
119. Hylton, T.A., Wenzloff G.J., Van Tyne C.J., and Matlock D.K., "The Importance of Microstructure, Surface Roughness, and Properties on the Frictional Behavior of Electrogalvanized Sheet Steels" Proc. Galvatech 1992, Verlag Stahleisen, Dusseldorf, Germany, 1992, 166-170.
120. Wenzloff, G.J., Van Tyne C.J., and Matlock D.K., "The Importance of Microstructure and Properties on the Formability of Electrogalvanized Sheet Steels" in [87], 275-293.
121. Ono, T., and Yoshida M., "Study on Frictional Characteristics of Electrogalvanized Steel Sheet" IDDRG 1992, 40-47.
122. Hirasaka, M.,:, "Effect of Surface Micro-Geometry of Steel Sheets on Galling Behaviour" J. JSTP, 31, No. 358, 1990, 1348-1354 (Japanese).
123. Schedin, E., "Simulations of the Friction Conditions During Sheet Forming" Nordic Project on Modelling and Simulation of Sheet Forming, Copenhagen, Denmark, 1992.
124. Roizard, X., von Stebut J., Paintendre B., and Venumiere L., "The Influence of Contact Temperature on Metal Transfer and Galling in Strip Drawing" IDDRG 1990, 161-171.
125. Wang, X.J., Duncan J.L., and Devenpeck M.L., "Punch Friction Tests for Sheet Metal Forming" J. Appl. Metalwork., 3, 1983, 3-11.
126. Bhonsle, S. R., and Weinmann K.J.,: "The Significance of the Elastic Deformation of Workpiece Sample in the Strip-Tension Friction Test" NAMRC 18, 1990, 46-51.
127. Haruff, J.P., Hylton T.A., Van Tyne C.J., and Matlock D.K., "Frictional Response of electrogalvanized Sheet Steels" in The Physical Metallurgy of Zinc Coated Steel (Marder A.R., ed.,) The Minerals, Metals & Materials Society, 1993, 295-307.
128. Brazier, W. G., and Thompson R. W.,: "The Effect of Die Materials and Lubrication on Punch Stretching and Drawing Forces of Cold-Rolled and Zinc-Coated Steels" SAE Paper 850274.
129. Sanchez, L.R., "Experimental Simulation of the Sheet Metal Response to Clamping During Forming" SAE Paper 940942, SAE 1994, 163-169.
130. Kang, Y.L., Wang X.J., Kihara J., Aizawa T., Usuda M., "Effect of Tool Shape and Friction on the Galvanized Sheet Forming" IDDRG 1990, 103-109.
131. Vallance, D. W., and Matlock D.K., "Application of the Bending-Under-Tension Friction Test to Coated Sheet Steels" J. Mater. Eng. Perform., 1, 1992, 685-694.
132. Sniekers R.J.J.M., and Ramaekers, J.A.H., "Experiments on Stripdrawing with Stationary Bending and Straightening" ICTP1993, 1716-1721.
133. Schey, J.A., and Watts S.W., "Transient Tribological Phenomena in Drawbead Simulation" SAE Paper 920634, SAE 1992, 143-149.
134. Savenko, V.I., and Shchukin E. D., "New Applications of the Rehbinder Effect in Tribology: A Review" Wear, 194, 1996, 86-94.
135. Rangarajan, V., Natalie C.A., Matlock D.K., and Krauss G., "Deformation Behaviour of Hot Dip Galvanized Coatings in Complex Sheet Metal Forming" J. Mater. Shaping Techn., 8, 1990, 101-105.
136. Schedin, E., Fredriksson K., and Gustafsson C., "Characterization of Friction Properties During Sheet Forming" IDDRG 1988, 55-61.
137. Simcak, F., Billy J., Stefan B., and Holly A., "Evaluation of Specific Characteristics of Zinc Coated Deep Drawing Sheets" IDDRG 1994, 109-120.
138. Makitmattila, S., Ranta-Eskola A., "Behavior of Galvanized Coatings During Forming" IDDRG 1984, 293-304.
139. Nine, H.D., "Friction Measurement for Forming of Zinc-Based Coated Sheet Steel"in [87], 233-242.
140. Harkness, D.M., "Solid-Film Prelubricants: Features and Benefits" Lubric. Eng., 47, 1991, 518-522.
141. Coduti P.L., "The Production and Implementation of Prelubricated Cold Rolled Steel" Lubric. Eng., 42, 1986, 532-538.
142. Montmitonnet, P., Delamare F., Cupcic S., Saint-Guirons H., and Xans P., "Physical Properties of Metal Soap Lubricants: Rheology, Phase Transitions under High Pressure" in Tribology - Friction, Lubrication and Wear: Forty Years On, Inst. Mech. Engrs, London, 1987, 441-418.
143. Tsubouchi, M., Kudo H., Kimura M., Minemura K., and Ruan F., "Influence of Drawing Speed and Die Pressure upon Lubrication Performance of Some Solid Lubricants" J. JSTP, 30, 1989, 1166-1173 (Japanese).
144. Hirose, Y., Sakane T., Wakano S., and Sudo C., "Frictional Behavior of New Polymer Lubricating Film for Coated Steel Sheets" SAE Paper 930810, SAE 1993, 255-260.
145. Schey, J.A., "Solid-Film Lubrication of Galvanized Sheets" SAE Paper 950697, SAE 1995, 55-64.
146. Androsch F.M., Kosters K., Radlmayr K.M., Meinhardt J., and Nagel U., "The Influence of Thin Organic Coatings on the Forming Properties of Steel Sheets for Automotive Use" IDDRG 1994, 91-107.
147. Andreasen, J.L., and Bay N., "A Strip Reduction Test for Measurement of Lubricity in Ironing" IDDRG 1996, 435-444.
148. Schedin, E., "Forming Properties of Stainless Steel" Int. Conf. Applications of Stainless Stee, 92, Stockholm, 1992.
149. Funke P., and Kinzel H., "The Effect of Temperature on Material and Lubricant Behavior in Deep Drawing Austenitic Steel Sheets" Stahl u. Eisen, 103, 1993, 807-811 (German).
150. Kubert, M., and Woska R., "Verschleisschutz bei Werkzeugen zum Kaltumformen und Trennen" Werkstatt u. Betrieb, 116, 1983 (3), 117-184 (German).
151. Mortensen, J., Dirks J., and Christensen P., "A Combined Physical and Numerical Simulation of Tool Performance in Conventional Deep-Drawing Operations" IDDRG 1994, 233-240.
152. Rao, R.S., Devenpeck M.L., Wright P.K., Appleby E.J., Lu C.Y., and Richmond O., "New Strip Drawing Experiments Using Transparent Sapphire Dies" Int. J. Mech. Sci., 27, 1985, 725-740.
153. Dalton, G.M., and Schey J.A., "Effects of Bead Surface Preparation on Friction in the Drawbead Test" SAE Paper 910511, SAE 1991, 29-39.
154. Schey, J.A., "Lubricant Effects in Drawing Coated Steel Sheets over Nitrided Die Surfaces" Lubric. Eng., 52, 1996, 630-636.
155. Wright, R.N., and Schurman T., "Die Friction Variations in Simulated Sheet Metal Forming" IDDRG 1990, 113-121.
156. Lewis, L.L., and Murray M.V., "Effect of Die Hardness and Lubrication on Stamping Performance of One-Side Electrogalvanized and Cold-Rolled Steel Sheet" SAE Paper 840368.
157. Meuleman, D.J., and Dwyer T.E., 'Die Materials and Treatments with Electrogalvanized Steels" SAE Paper 880369.
158. Belliard, P., Thomas B., Monfort G., Defourny J.,: "The Effect of Tool Material on the Galling Behaviour in the Press Forming of Coated and Uncoated Steel Sheets" IDDRG 1992, 8-15.
159. Schmoeckel, D., and Frontzek H., "Reduction of Wear on Sheet Metal Forming Tools" CIRP, 35, 1986, 195-198.
160. Davies, R.G., and Stewart W.S., "Influence of Die Material upon the Coefficient of Friction in Zinc-Based Steel Coating Systems" in [87] 243-250.
161. Lindsay, J.H., Nine H.D., and Mickalich M.K.,: "The Effect of Surface Finish on the Drawing Characteristics of Chromium-Plated Sheet Metal Forming Tools" GMR-7141 Report, Aug. 28, 1990.
162. Tsuchiya, Y., Kawaura H., and Arai T., "Effects of Surface Roughness of Tools on Galling Behavior in Metal Forming" J. JSTP, 34, 1993, 1184-1189 (Japanese).
163. Schey, J.A., "Friction and Lubrication in Drawing Coated Steet Sheets on Chromium-Coated Beads" Lubric Eng., 52, 1996, 677-681.
164. Dohda, K., "Tribological Properties of Thin Hard Coatings used in Metal Forming" Proc. Japan Int. Tribology Conf., Nagoya, 1990, 8 pp.
165. Korhonen, A., Sirvio E., and Sundquist H., "New Ways of Improving the Surface Properties of Metal Forming Tools" IDDRG 1982, 175-180.
166. Dohda, K., and Kawai N., "Compatibility Between Tool Materials and Workpiece in Sheet-Metal Ironing Process" J. Tribol., 112, 1990, 275-281.
167. Meuleman, D. J., and Zoldak J.J.,:, "The Interaction of Coated Steels, Die Materials and Forming Lubricants" SAE Paper 860432.
168. Story, J.M., Jarvis G.W., Zonker H.R., and Murtha S.J., "Issues and Trends in Automotive Aluminum Sheet Forming" SAE Paper 930277, SAE 1993, 1-25.
169. Emmens, W.C., and Schoepen F., "Some Frictional Aspects of Aluminum in Sheet Metal Forming" IDDRG 1996, 487-496.
170. Schey, J.A., "Friction in Working 5052 Aluminum Alloy Sheet" in Light Metals Processing and Applications, (Bickert C., et al, eds.), The Metallurgical Society of CIM, Montreal, 1993, 571-580.
171. Lin, J.F., Wang L.W., and Huang T.K., "Friction in Deep Drawing of Aluminum Sheet" Wear, 156, 1992, 189-199.
172. Kudo, H., Tsubouchi M., Takada H., and Okamura K., "An Investigation into Plasto-Hydrodynamic Lubrication with a Cold Sheet Drawing Test" CIRP, 31, 1982, 175-180.
173. Mahdavian, S.M., and Shao Z.M., "Isoviscous Hydrodynamic Lubrication of Deep Drawing and its Comparison with Experiment" J. Tribol., 115, 1993, 111-118.
174. Saha, P. K., and Wilson W.R.D., "Influence of Plastic Strain on Friction in Sheet Metal Forming" Wear, 172, 1994, 167-173.
175. Maillard, A., and Gasnier J., "Performance Evaluation of Lubricants During Blanking" IDDRG WG, 1995.
176. Smith, M. K., and Dunn J.A., "Lubricant Considerations for Aluminum Automotive Sheet" Lubric. Eng., 49, 1993, 914-918.
177. Usuda, M., et al, "Forming Performance of Aluminum Alloy Sheets for Automobile Body Panels" SAE Paper 950924, SAE 1995, 191-201.
178. Story, J.M., and Weinmann K.J., "The Effects of Surface Topography and Surface Chemistry on Metal Build-Up on the Tools During the Forming of Aluminum Sheet" NAMRC 1980, 245-251.
179. Balbach R., "Influence of Various Surface Microstructures on the Tribology in Aluminum Sheet Metal Forming" CIRP, 36, 1987, 181-184 (German).
180. Murtha, S.J., Story J.M., Harvis G.W., and Zonker H.R., "Anisotropy Effects in the Forming of Aluminum Sheet" SAE Paper 950702, SAE 1995, 103-111.
181. Anderson, B., "The Influence of Surface Topography on the Forming Performance of Aluminium" IDDRG 1984, 467-475.
182. Pearce, R., "Some Effects of Friction in Punch-Stretching" in Developments in the Drawing of Metals, The Metals Society, London, 1983, 249-256.
183. Bello, D.O., and Walton S., "Surface Topography and Lubrication in Sheet Metal Forming" Trib. Int., 20, 1987 (2) 59-65.
184. Story, J.M., and Engelmann D.M., "Surface Topography Effects on Friction in the Forming of Aluminum Sheet" IDDRG 1994, 164-176
185. Siegert, K., and Wagner S., "3-Dimensional Description of Sheet Metal Surfaces" SAE Paper 950918, SAE 1995, 135-142.
186. Schey, J.A., and Nautiyal P.C., "Effects of Surface Roughness on Friction and Metal Transfer in Lubricated Sliding of Aluminum Alloys Against Steel Surfaces" Wear, 146, 1991, 37-51.
187. Sato, A., Nakamura S., and Tomioka Y., "Automobile Aluminum Panel Stamping Mass Production Technology" IDDRG 1994, 479-490.
188. Woska, R., "Influence of the Fine Surface Structure of Coated Dies on Mixed-Friction Behavior in the Forming of Aluminum" Aluminium, 60, 1984, E306-E310.
189. Zonker, H.R., Whittle N.C., Hoffman R.A., and Teichman M.M., "Tool Material Performance During Draw Bead Deformation of Aluminum Sheet" SAE Paper 960820, SAE 1996, 125-133.
190. Nautiyal, P.C., and Schey J.A., "Friction and Metal Transfer in Sliding Aluminum Against Ion-Implanted Steel" in Surface Engineering: Current Trends and Future Prospects, (Meguid S.A., ed.) Elsevier, 1990, 146-155.
191. Dohda, K., Kashiwaya S., Tsuchiya Y., and Arai T., "Tribo- Characteristic of Tool Materials Against Aluminum in Sheet Metal Forming" ATP 1993, 1618-1623.