Mixed lubrication modelling of Newtonian and shear thinning liquids in a piston-ring configuration

SAE Technical Papers

Volumn , Issue , 1997, Pages

  Arcoumanis, C ^a   Ostovar, P ^a   Mortier, R ^b  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b Castrol International ^*

Author keywords

[No Author keywords available]

Indexed keywords

NON NEWTONIAN FLOW; PISTON RINGS; PISTONS; REYNOLDS EQUATION; SHEAR FLOW; SHEAR THINNING; SOLID LUBRICANTS; STOCHASTIC SYSTEMS; SURFACE ROUGHNESS; VISCOELASTICITY;

ANISOTROPIC SOLIDS; ASPERITY INTERACTIONS; MATHEMATICAL SIMULATIONS; MIXED LUBRICATION MODELS; RING CONFIGURATION; SHEAR THINNING FLUIDS; SHEAR-THINNING LIQUIDS; VISCOELASTIC EFFECTS;

LUBRICATION;

EID: 85072471168     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/972924     Document Type: Conference Paper

References (97)

1. Patir N., and Cheng H. S., "An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication" Trans. of ASME, J. of Lubrication Technology, V 100, pp 12-17, 1978.
2. Patir N., and Cheng H. S., "Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces" Trans. of ASME, J. of Lubrication Technology, Vol. 101, pp 220-230, 1979.
3. Greenwood J. A., and Tripp J. H., "The Contact of Two Nominally Flat Rough Surfaces" Proc. Inst. Mech. Engrs., V. 185, No. 48, pp 625-633, 1971.
4. Heywood J. B., "Internal Combustion Engine Fundamentals" McGraw-Hill series in Mechanical Engineering, 1988.
5. Nakada M., "Trends in Engine Technology and Tribology" Tribology International, V 27, No. 1, pp 3-8, 1994.
6. Tateishi Y., "Tribological Issues in Reducing Piston Ring Friction Losses" Tribology International, V 27, No. l, pp 17-23, 1994.
7. Thring R. H., "Engine Friction Modelling" SAE paper 920482, 1992.
8. Goenka P. K., Paranjpe R. S., and Jeng Y. R., "Flare: An Integrated Software Package for Friction and Lubrication Analysis of Automotive Engines-Part I: Overview and Applications" SAE paper 920487, 1992.
9. Wakuri Y., Soejima M., Ejima Y., Hamatake T., and Kitahara T., "Studies on Friction Characteristics of Reciprocating Engine" SAE paper 952471, 1995.
10. th Nordic Symposium on Tribology, Lubrication, Friction and Wear, Nordtrib '90, Hirtshals, Denmark, pp 349-361, 1990.
11. So H., and Lin Y. C., "The Theory of Antiwear for ZDDP at Elevated Temperature in Boundary Lubrication Condition" Wear, V 177, pp 105-115, 1994.
12. Arnell R. D., Davies P. B., Halling J., and Whomes T. L., "Tribology: Principles and Design and Applications" MacMillan Education Ltd, 1991.
13. Ostovar P., "Fluid Aspects of Piston-Ring Lubrication" PhD thesis, Imperial College of Science, Technology and Medicine, University of London, 1996.
14. th Leeds-Lyon Symposium on Tribology, Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Publishers: Butterworths, pp 122-131, 1982.
15. Lo S-W, "On the Effects of Roughness Orientation-A Mapping and Double Scale Analysis of Flow Factors" Trans. of ASME, J. of Tribology, V 747, pp 747-754, 1992.
16. Tripp J. H., "Surface Roughness Effects in Hydrodynamic Lubrication: The Flow Factor Method" Trans. of ASME, J. of Lub. Tech., V 105, pp 458-465, 1983.
17. Huang X., "Hydrodynamic Lubrication Under Severe Conditions" PhD Thesis, Mechanical Engineering Department, Northwestern University, Evanston, Illinois, USA, 1990.
18. th Leeds-Lyon Symposium on Tribology, Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Publishers: Westbury House, pp 262-278, 1980.
19. th International Congress on Combustion Engines, Florence, 1991.
20. Keribar R., Dursunkaya Z., and Flemming M. F., "An Integrated Model of Ring Pack Performance" Trans. of the ASME, Journal of Engineering for Gas Turbines and Power, V 113, pp 382-389, 1991.
21. Zhu D., Cheng H. S., Arai T., and Hamai K., "A Numerical Analysis for Piston Skirts in Mixed Lubrication, Part I: Basic Modelling" Trans. of ASME, J. of Tribology, V 114, pp 553-562, 1992.
22. Zhu D., Hu Y.-Z., Cheng H. S., Arai T., and Hamai K., "A Numerical Analysis for Piston Skirts in Mixed Lubrication-Part II: Deformation Considerations" Trans. ASME, Journal of Tribology, V 115, pp 125-133, 1993.
23. Keribar R., and Dursunkaya Z., "A Comprehensive Model of Piston Skirt Lubrication" SAE paper 920483, 1992.
24. Wu C., and Zheng L., "An Average Reynolds Equation for Partial Film Lubrication with a Contact Factor" Trans. of ASME, J. of Tribology, Vol. 111, pp 188-191, 1989.
25. Hu Y., Cheng H. S., Arai T., Kobayashi Y., and Aoyama S., "Numerical Simulation of Piston Ring in Mixed Lubrication-A Non-axisymmetrical Analysis" Trans. of ASME, Journal of Tribology, V 116, pp 470-478, 1994.
26. Yun J. E., Chung Y., Chun S. M., and Lee K. Y., "An Application of Simplified Average Reynolds Equation for Mixed Lubrication Analysis of Piston Ring Assembly in an Internal Combustion Engine" SAE paper 952562, 1995.
27. Lloyd T., "A Hydrodynamic Lubrication of Piston Rings" V 183, Pt. 3P, pp 28-34, 1969.
28. th Leeds-Lyon Symposium on Tribology, Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Publishers: MEP, pp 152-161, 1980.
29. Dowson D., Ruddy B. L., and Economou, "The Elastohydrodynamic Lubrication of Piston Rings" Proc. R. Soc. Lond., A 386, pp 409-430, 1983.
30. Hwu C.-J., and Weng C.-I., "Elastohydrodynamic Lubrication of Piston Rings" Wear, V 151, pp 203-215, 1991.
31. Wu G., and Chen Z., "The Numerical Study of Piston Ring Elastohydrodynamic Lubrication by the Multigrid Method" Tribology Transactions, V 35, No. 1, pp 135-141, 1992.
32. th Leeds-Lyon Symposium on Tribology, Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Publishers: Butterworths, 1982.
33. th Leeds-Lyon Symposium on Tribology, Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Publishers: Butterworths, 109-121, 1982.
34. Okrent E. H., "The Effect of Lubricant Viscosity and Composition on Engine Friction and Bearing Wear" ASLE Trans., Vol. 4, pp 97-108, 1961.
35. Johnson R. H., and Wright W. A., "The Rheology of a Multigraded Motor Oil" SAE paper 680072, 1968.
36. Alexander D. L., "Computer Model of the Degradation of VI Improvers in Engine Service and Bench Tests" SAE paper 952531, 1995.
37. Stambaugh R. L., "Viscosity Improvers and Thickeners" Published in "Chemistry and Technology of Lubricants" Eds. Mortier R. M., and Orszulik S. T., Blakie Academic & Professional, pp 124-159, 1992.
38. th Leeds-Lyon Symposium on Tribology, Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Publishers: MEP, pp 95-102, 1980.
39. Smeeth M., Gunsel S., and Spikes H. A., "Boundary Film Formation by Viscosity Index Improvers" Tribology Transactions, pre-print 95-TC-3C-1, 1995.
40. Rajalingam C., Rao B. V. A., and Prabhu B. S., "The Effect of a Non-Newtonian Lubricant on Piston Ring Lubrication" Wear, V 50, pp 47-57, 1978.
41. Johnson M. W. (Jr.), and Mangkoesoebroto S. P., "Thin Film Theory for the Power Law Fluid with Application to Piston Ring Lubrication" SAE paper 922285, 1992.
42. Taylor R. I., Brown M. A., Thompson D. M., and Bell J. C., "The Influence of Lubricant Rheology on Friction in the Ring-Pack" SAE paper 941981, 1994.
43. Taylor R. I., Kitahara T., Saito T., and Coy R. C., "Piston Assembly Friction and Wear: The Influence of Lubricant Viscometry" Proc. Int. Trib. Con., Yokohama, 1995.
44. Bates T. W., Williamson B., Spearot J. A., and Murphy C. K., "The Importance of Oil Elasticity" Industrial Lubrication and Tribology, Nov.-Dec. issue, pp 4-19. 1989. This paper was also published as: "A Correlation Between Engine Oil Rheology and Oil Film Thickness in Engine Journal Bearings" SAE Paper 860376, 1986.
45. Williamson B. P., and Milton A., "Characterisation of the Viscoelasticity of Engine Lubricants at Elevated Temperatures and Shear Rates" SAE Paper 951032, 1995.
46. Tomioka J., Hayashi H., and Wada S., "The Effect of Nonlinear Viscoelasticity of Lubricants of Piston Ring Lubrication" JSME International Journal, Series III, V 35, No. 3, pp 477-484, 1992.
47. Rastogi A., and Gupta R. K., "Effect of Shear Thinning on Cavitation in Lubricant films" SAE paper 922286, 1992.
48. Trevena D. H., "Cavitation and Tension in Liquids" Adam Hilger, pp 111-112, 1987.
49. Bird R. B., Armstrong R. C., Hassager O., "Dynamics of Polymeric Liquids: Volume 1-Fluid Mechanics" John Wiley and Sons, 1987.
50. Cross M. M., "Rheology of non-Newtonian Fluids: A new Flow Equation for Pseudo-Plastic Systems" J. Colloid Sci., V 20, pp 417-437, 1965.
51. Dowson D., "A Generalised Reynolds Equation for Fluid Film Lubrication" Int. J. Mechanical Sciences, V. 4 pp 159-170, 1962.
52. Arcoumanis C., Duszynski M., Flora H., and Ostovar P., "Development of a Piston-Ring Lubrication Test-Rig and investigation of Boundary Conditions for Modelling Lubricant film Properties" SAE paper 952468, 1995.
53. Swift H. W., "The Stability of Lubricating Films in Journal Bearings" J. Inst. Civ. Engrs, Vol 233, ff 267, 1931.
54. Stieber W., "Das Schwimmlager" Verband Deutscher Ingenieure (V.D.I.), Berlin, 1933.
55. Hopkins M. R., "Viscous Flow Between Rotating Cylinders and a Sheet Moving Between them" British J. Appl. Phys, Vol. 8, pp 442-444, 1957.
56. Birkhoff G., and Hays D. F., "Free Boundaries in Partial Lubrication" J. Math. Physics, Vol. 42, No. 2, pp 126-138, 1963.
57. Coyne J. C., and Elrod H. G. Jr., "Conditions for the Rupture of a Lubricating Film-Part I: Theoretical Model" J. Lub. Tech. Trans. of the ASME, pp 451-456, 1970.
58. Coyne J. C., and Elrod H. G. Jr., "Conditions for the Rupture of a Lubricating Film-Part II: New Boundary Conditions for Reynolds Equation" J. Lub. Tech., Trains. of the ASME, pp 156-167, 1971.
59. Floberg L., "On Hydrodynamic Lubrication with Special Reference to Sub-Cavity Pressures and Number of Streamers in Cavitation Regions" Acta Polytechnica Scandinavika, Me 19, 1965.
60. Floberg L., "Lubrication of Two Rotating Cylinders at Variable Lubricant Supply with Reference to the Tensile Strength of the Lubricant" J. Lub. Tech., Trans. of the ASME, pp 155-165, 1973.
61. Dowson D., and Taylor C. M., "Fundamental Aspects of Cavitation in Bearings" published in "Cavitation and Related Phenomenon in Lubrication" Proc. of the First Leeds -Lyon Symp. on Tribology, Eds. Dowson D., Godet M., and Taylor C. M., published by London and New York, 1974.
62. Jeng Y.-R., "Theoretical Analysis of Piston Ring Lubrication, Part I-Fully Flooded Lubrication" Tribology Transactions, V 35, No. 4, pp 696-706, 1992.
63. Jeng Y.-R., "Theoretical Analysis of Piston Ring Lubrication, Part II-Starved Lubrication and Its Application to a Complete Ring Pack" Tribology Transactions, V 35, No. 4, pp 696-706, 1992.
64. Booker J. F., "Basic Equations for Fluid Films with Variable Properties" Trans. ASME, Journal of Tribology, V 111, pp 475-483, 1989.
65. Dowson D., "Early concepts of the role of surface Topography in Tribology" Published in "Surface Roughness Effects in Lubrication" Eds. Dowson D., Taylor C. M., Godet M., and Berthe D., Proceedings of the 4th Leeds Lyon Symposium on Tribology, 1977.
66. th Leeds Lyon Symposium on Tribology, 1977.
67. Boeker G. F., US Classified document (as cited by Elrod [66]), 1944.
68. Christensen H., and Tonder K., "The Hydrodynamic Lubrication of Rough Bearing surfaces of Finite Width" Trans. of ASME, J. Lubrication Technology, pp 324-330, 1971.
69. Christensen H., "Stochastic Models for Hydrodynamic Lubrication of Rough Surfaces" Proc. Inst. Mech. Engers., V 184, Pt. 1, No. 55, pp 1013-1022, 1969-1970.
70. Mitsuya Y., Ohkubo T., and Ota H., "Average Reynolds Equation Extended to Gas Lubrication Possessing Surface Roughness in the Slip Flow Regime: Approximate Methods and Confirmation of Experiments" Trans. of ASME, J. of Tribology, V. 111, pp 495-503, 1989.
71. Tonder K., "DDC Lubrication: A New Concept in Tribology" Trans. of ASME, J. of Tribology, V. 114, pp 181-185, 1992.
72. Sugimura J., "Hydrodynamic Lubrication of Fractal Surfaces" Proceedings of the International Tribology Conference, Yokohama, 1995.
73. th Leeds Lyon Symposium on Tribology, pp 256-263, 1977.
74. Bush A. W., "Predicting the Behaviour of Lubricated Bearings from Surface Measurements" Wear, V. 109, pp 315-327, 1986.
75. Patir N., "A Numerical Procedure for Random Generation of Rough Surfaces" Wear, Vol. 47, No. 2, pp 263-277, 1978.
76. Hamrock, B. J., "Fundamentals of Fluid Film Lubrication" NASA reference publication 1255, Chapter 3, 1991.
77. Venner C. H., and Ten Napel W. E., 1992, "Surface Roughness Effects in an EHL Line Contact" Trans. of ASME, J. of Tribology, Vol. 114, pp 616-622
78. Tonder K., "The Lubrication of Unidirectional Striated Roughness: Consequences for some general Roughness Theories" Trans. of ASME, J. of Tribology, V. 108, pp 167-170, 1986.
79. Hu Y., and Zheng L., "Some Aspects of Determining Flow Factors" Trans. of ASME, J. of Tribology, V. 111, pp 525-531, 1989.
80. Bhushan B., and Tonder K., "Roughness Induced Shear- and Squeeze-Film Effects in Magnetic Recording-Part I: Analysis" Trans. of ASME, J. of Tribology, V 111, pp 220-227, 1989.
81. Lubrecht A. A., and Ten Napel W. E., and Bosma R., "The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts" Trans. of ASME, J. of Tribology, V. 110, pp 421-426, 1988.
82. Sheu S., and Wilson W. R. D., "Mixed Lubrication of Strip Rolling" Tribology Transactions, V. 37, No. 3, pp 483-493, 1994.
83. Crone R. M., Jhon M. S., Bhushan B., and Karis T. E., "Modelling the Flying Characteristics of a Rough Magnetic Head Over a Rough Rigid Disk Surface" Trans. of ASME, J. Tribology, V 113, pp 739-749, 1991.
84. Makino T., Morohoshi S., and Taniguchi S., "Application of Average Flow Model to Thin Film Gas Lubrication" Trans. of ASME, J. of Tribology, V. 115, pp 185-190, 1993.
85. Tonder K., "Effects of Skew Unidirectional Striated Roughness on Hydrodynamic lubrication" Wear, V 115, pp 19-30, 1987.
86. Greenwood J. A., and Williamson J. B. P., "Contact of Nominally Flat Surfaces" Proc. Roy. Soc., Series A, V. 295, pp 300-319, 1966.
87. McCool J. I., "Relating Profile Instrument Measurements to the Functional Performance of Rough Surfaces" Trans. of ASME, J. of Tribology, V. 109, pp 264-270, 1987.
88. Sayles R. S., and Thomas T. R., "Thermal Conductance of Rough Elastic Contact" Applied Energy, V. 2. pp 249-267, 1976.
89. Louguet-Higgings M. S., "The Statistical Analysis of a Random Moving Surface" Phil. Trans. Royal Soc. London, Series A, V. 249, pp 321-387, 1957.
90. Bush A. W., Gibson R. D., and Keogh G. P., "The Limit of Elastic Deformation in the Contact of Rough Surfaces" Mech. Res. Commun, V. 3, pp 169-174, 1976.
91. Nayak P. R., "Random Process Model of Rough Surfaces" Trans. of ASME, J. of Lubrication Technology, pp 398-407, 1971.
92. Ralston A., and Rabinowitz P., "A First Course in Numerical Analysis" Ch. 8: "The Solution of Non-Linear Equations" Second Edition, McGraw-Hill, 1978.
93. Press W. H., Teukolsky S. A., Vetterling W. T., and Flannery B. P., "Numerical Recipes in FORTRAN: The Art of Scientific Programming" Second Edition, Cambridge University Press, 1992.
94. Chapra S. C., and Canale R. P., "Numerical Methods for Engineers" Second Edition, McGraw-Hill, 1988.
95. Davies P. J., and Rabinowitz P., "Methods of Numerical Integration" Academic Press, 1975.
96. Burden R. L., and Faires J. D., "Numerical Analysis" PWS Publishing Company, Chapter 4, 1993.
97. Faires J. D., and Burden R. L., "Numerical Methods" PWS Publishing Company, Chapter 4, 1993.