Corner design in deep drawn rectangular parts

SAE Technical Papers

Volumn , Issue , 1997, Pages

  Wong, C ^a   Wagoner, R H ^a   Wenner, M L ^b  

^a OHIO STATE UNIVERSITY   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FRICTION; METAL DRAWING; STRAIN HARDENING;

CORNER RADIUS; FRICTION COEFFICIENTS; MATERIAL ANISOTROPY; PROCESS VARIABLES; RECTANGULAR PARTS; RESTRAINT FORCES; STRAIN RATE SENSITIVITY; STRAIN-HARDENING EXPONENT;

STRAIN RATE;

EID: 85072462875     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/970437     Document Type: Conference Paper

References (37)

1. Fratini, L., Lo Casto, S., and Micari, F., 1995, "Deep drawing of square boxes: Analysis of the Influence of Geometrical Parameters by Numerical Simulations and Experimental Tests," Simulation of Materials Processing: Theory, Methods and Applications, Shen, & Dawson, ed., Balkema, Rotterdam, pp. 705-709.
2. Iwata, N., Matsui, M., and Gotoh, M., 1992, "An Elastic-plastic FEM Analysis of Square-Cup Drawing Process," Proceedings of the Third International Conference on Computational Plasticity, Fundamentals and Applications, Part II, Owen, D.R.J., Onate, E., and Hinton, E., ed., Pineridge Press, Swansea, pp. 1311-1320.
3. Belingardi, G., and Goglio, L., 1992, "Simulation of Square Box Deep Drawing Using an Explicit Code: Numerical and Experimental Results," Proceedings of the Third International Conference on Computational Plasticity, Fundamentals and Applications, Part II, Owen, D.R.J., Onate, E., and Hinton, E., ed., Pineridge Press, Swansea, pp. 1321-1332.
4. Makinouchi, A., Nakamachi, E., Onate, E., and Wagoner, R.H., 1993, Proceedings of The 2nd International Conference, NUMISHEET '93, Numerical Simulation of 3-D Sheet Metal Forming Processes, Isehara, Japan.
5. Cope, S.R., 1953, "You Can Draw Rectangular Shells by Following Certain Rules," American Machinist, Vol. 97, pp. 156-159.
6. Die Design Handbook, Third Edition, 1990, Smith, D.A., ed., Society of Manufacturing Engineers.
7. Eary, D.F., and Reed, E.A., 1974, Techniques of Pressworking Sheet Metal, Prentice-Hall, New Jersey.
8. Gopinathan, V., 1977, "Optimum Blank Profile Determination for Rectangular Deep Drawing," Indian Journal of Technology, pp. 330-333.
9. Waller, J.A., 1978, Press Tools and Presswork, Portcullis Press.
10. Doege, I.E., 1985, "Prediction of Failure in Deep Drawing," Computer Modeling of Sheet Metal Forming Process: Theory, Verification and Application, Wang, N.M., and Tang, S.C., ed., AIME Press, pp. 209-224.
11. Hsu, T.C., and Lee, S.Y., 1976, "A Definition of Drawability and Its Relation to Deformation in the Drawing of Square Cups," Journal of Testing and Evaluation, JTEVA, Vol. 4, no. 5, pp. 340-346.
12. Hsu, T.C., and Lee, S.Y., 1977, "On the Drawability of Sheet Metal in Noncircular Cups," Journal of Engineering for Industry, pp. 615-619.
13. Thomson, T. R., 1975, "Influence of Material Properties in the Forming of Square Shells," Journal of the Australian Institute of Metals, Vol. 20, no. 2, pp. 106-113.
14. El-Wakil, S.D., Kamal, M.N.E.M., and Darwish, A.H., 1980, "Mechanics of the Square Box Drawing Operation of Aluminum Blanks," Sheet Metal Industries, pp. 679-689, 759.
15. Majlessi, S.A., and Lee, D., 1993, "Deep Drawing of Square-Shaped Sheet Metal Parts, Part 2: Experimental Study," Journal of Engineering for Industry, Vol. 115, pp. 110-117.
16. Yoshida, K., Yoshii, K., Komorida H., and Miyauchi K., 1978, "Fracture Behaviour, Forming Severity and Metal Flow in Deep Drawing of Irregular Shape Shells," Sci. Papers of the Inst. of Phys. and Chem. Res., Vol. 72, no. 3, pp. 115-124.
17. Kawai, N., Mori, T., Hayashi, H., and Kondoh, F., 1987, "Effects of Punch Cross-Section on Deep-Drawability of Square Shell of Aluminum Sheet," Journal of Engineering for Industry, Vol. 109, pp. 355-361.
18. Mori, T., and Marumo, Y., 1990, "A Systematic Approach to Improving Square Shell Drawability," Advanced Technology of Plasticity 1990, Vol. 3, pp. 1179-1184.
19. Kobayashi, S., 1985, "Deformation Analysis and Blank Design in Square Cup Drawing," Advanced Systems for Manufacturing, SME, pp. 285-294.
20. Kim, N., and Kobayashi, S., 1986, "Blank Design in Rectangular Cup Drawing by an Approximate Method," Int. J. Mach. Tool Res. Des., Vol. 26, pp. 125-135.
21. Assempoor, A., and Karima, M., 1992, "Interaction of Part Geometry and Material Properties with Forming Severity and Tooling Design for Box-Shaped Stampings" SAE Paper 920438, in Autobody Stamping Applications and Analysis, SAE SP-897, pp. 105-113.
22. Gloekl, H., and Lange, K., 1983, "Computer Aided Design of Blanks for Deep Drawing Irregular Shaped Components," Proceedings of 11th NAMRC, SME, pp. 243-251.
23. Vogel, J.H., and Lee, D., 1990, "An Analysis Method for Deep Drawing Process Design," International Journal of Mechanical Sciences, Vol. 32, pp. 891-907.
24. Majlessi, S.A., and Lee. D., 1993, "Deep Drawing of Square-Shaped Sheet Metal Parts, Part 1: Finite Element Analysis," Journal of Engineering for Industry, Vol. 115, pp. 102-109.
25. Doege, I.E., and Schulte, S., 1992, "Design of Deep Drawn Components with Elementary Calculation Methods," Journal of Materials Processing Technology, Vol. 34, pp. 439-447.
26. Doege, I.E., and Boinski, F., 1994, "Computer-aided Design and Calculation of Deep Drawn Components," Journal of Materials Processing Technology, Vol. 46, pp. 321-331.
27. Walker, T., Kolodziejski, J., and Karima, M., 1992, "Using Axisymmetric Solutions to Estimate the Forming Severity of Three Dimensional Metal Stampings," SAE Paper 920636, in Autobody Stamping Applications and Analysis, SAE SP-897, pp. 161-172.
28. Germain, Y., Chung, K., and Wagoner, R.H., 1989, "A Rigid Visco-Plastic Finite Element Program for Sheet Metal Analysis," International Journal of Mechanical Sciences, Vol. 31, pp. 1-24.
29. Keum, Y.T., Nakamachi, E., Wagoner, R.H., and Lee, J.K., 1990, "Compatible Description of Tool Surfaces and FEM Meshes for Analyzing Sheet Forming Operations," International Journal of Numerical Methods in Engineering, Vol. 30, pp. 1471-1502.
30. Zhou, D., and Wagoner R.H., 1993, "Development and Application of Sheet Forming Simulation" NUMISHEET '93, eds., Makinouchi A., Nakamachi E., Onate E., and Wagoner R.H., The Institute of Physical and Chemical Research, pp. 3-18.
31. Zhou, D., and Wagoner R.H., 1994, "An N-CFS Algorithm for Sheet Forming FE Modelling" Metal Forming Process Simulation Industry, Vol. II, Druckerei GmbH, Monchengladbach, Germany, pp. 57-74.
32. Zhou, D., and Wagoner R.H., 1995, "Development and Application of Sheet Forming Simulation" J. Mat. Proc. Technol., Vol. 50, pp. 1-16.
33. Saran, M.J., and Wagoner, R.H., 1991, "A Consistent Implicit Formulation for Nonlinear Finite Element Modeling with Contact and Friction, Part 1-Theory," Journal of Applied Mechanics, Vol. 58, pp. 499-506.
34. Saran, M.J., and Wagoner, R.H., 1991, "A Consistent Implicit Formulation for Nonlinear Finite Element Modeling with Contact and Friction, Part 2-Numerical Verification and Results," Journal of Applied Mechanics, Vol. 58, pp. 507-512.
35. Wagoner, R.H., Chan, K.S., and Keeler, S.P., 1989, Forming Limit Diagrams: Concepts, Methods, and Applications, TMS, Warrendale, Pennsylvania.
36. Lee, J.K., Kinzel, G.L., and Wagoner R.H., editors, 1996, NUMISHEET '96, Ohio State University, 847 pages.
37. Wenner, M.L., 1992, "Elementary Solutions and Process Sensitivities for Plane-Strain Sheet-Metal Forming," Journal of Applied Mechanics, Vol. 59, pp. S23-28.