Contribution of oil layer mechanism to the hydrocarbon emissions from spark-ignition engines

SAE Technical Papers

Volumn , Issue , 1997, Pages

  Linna, Jan Roger ^a   Målberg, Henrik ^a   Bennett, Paul J ^c   Palmer, Peter J ^b   Tian, Tian ^d   Cheng, Wai K ^d  

^a Arthur D Little Inc   (United States)

^b VOLVO CAR CORPORATION   (Sweden)

^c BP Oil Ltd ^*

^d MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR ENGINES; CRANKCASES; ENGINE CYLINDERS; FUELS; SOLUBILITY;

ABSORPTION/DESORPTION; CYLINDER LINERS; EXPERIMENT DESIGN; HYDROCARBON EMISSION; LAYER MECHANISMS; LAYER THICKNESS; OIL FILM THICKNESS; RESEARCH PROGRAMS;

LUBRICANTS;

EID: 85072462289     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/972892     Document Type: Conference Paper

References (26)

1. Dent J. C., and Lakshminarayanan P. A., (1983). A model for absorption and desorption of fuel vapour by cylinder lubricating oil films and its contribution to hydrocarbon emissions, SAE Technical Paper No. 830652
2. Carrier G., Fendell F., and Feldman P., (1981). Cyclic absorption/desorption of gas in a liquid wall film, Combustion Science and Technology, vol. 25, pp. 9-19
3. Korematsu K., (1990). Effects of fuel absorbed in oil film on unburnt hydrocarbon emissions from spark ignition engines (numerical model of dynamic process of fuel absorption and desorption), JSME International Journal Series II, vol. 33, No 3
4. Shih L. K., and Assanis D.,. N. (1992). Modeling unburned hydrocarbon formation due to absorption/desorption processes into the wall oil film, Symposium on Mechanism and Chemistry of Pollutant Formation and Control from Internal Combustion Engines, Presented before the Division of Petroleum Chemistry, Inc. American Chemical Society Washington, D.C., August 23-28, 1992, pp. 1479-1497
5. Gatellier B., Trapy J., and Herrier D.,: Hydrocarbon emissions of SI engines as influenced by fuel absorption-desorption in oil films, SAE Technical Paper No. 920095
6. Ma T. H., Woods W. A., Panesar A., Brown P., Dent J. C., and Lambert N., (1987): Tracing the sources of hydrocarbon emissions in engines-a review of several research programmes made over the past five years, ImechEC326/87
7. Schramm J., and Sorenson S.,. (1989). Effects of lubricating oil on hydrocarbon emissions in an SI engine, SAE Technical Paper No. 890622
8. Wentworth J. T., (1972): More on origin of exhaust hydrocarbons-effects of zero oil consumption, deposit location, and surface roughness, SAE Technical Paper No. 720939
9. Russ S., Kaiser E., Siegl W., Podsiadlik D., and Barrett K.,. (1995): Compression Ratio and Coolant Temperature Effects on HC Emissions from a S.I. Engine, SAE Technical Paper No 950163
10. Kaiser E. W., Siegl W. O., and Russ S. G., (1995). Fuel Composition Effects on Hydrocarbon Emissions from a Spark-Ignited Engine-Is Fuel Absorption in Oil Significant ?, SAE Technical Paper No. 952542.
11. Linna J-R, and Hochgreb S., (1995): Analytical Scaling Model for Hydrocarbon Emissions from Fuel Absorption in Oil Layers in Spark Ignition Engines, Combustion Science and Technology, 1995, Vol. 109, pp. 205-226
12. Bennett P. J., Copp D. E., Linna J-R, and Malberg H., (1997). The Effect of Lubricant Composition on Vehicle Exhaust Emissions, SAE Technical Paper No. 97FL-403.
13. Gibbs L. M., (1996). Gasoline specifications, regulations, and properties, Automotive Engineering / October 1996, pp 35-42
14. Chen K. C., DeWitte K., and Cheng W. K., (1994). A Species-Based Multi-Component Volatility Model for Gasoline, SAE Technical Paper No. 941877
15. Boyle R. J., Boam D. J., and Finlay I. C., (1993). Cold Start Performance of an Automotive Engine Using Prevaporized Gasoline, SAE Technical Paper No. 930710
16. Tian T., Wong V., and Heywood J. B., (1996). A Piston Ring-Pack Film Thickness and Friction Model for Multigrade Oils and Rough Surfaces, SAE Technical Paper No. 962032
17. Poulos S. G., and Heywood J. B., (1983). The effect of chamber geometry on spark-ignition engine combustion, SAE Technical Paper No. 830334.
18. Poulos S. G., (1982). The effect of combustion chamber geometry on S.I. engine combustion rates-a modeling study, S.M. Thesis, MIT 1982.
19. Woschni G., (1967). A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine, SAE Technical paper No 670931
20. Murakami Y., and Aihara H., (1991). Analysis of Mechanism Intermixing Combustion Products in Engine Oil (Quantity and Composition of Unburned Gasoline in Engine Oil and Crankcase Gas), JSME International Journal, Series II, vol 34, No 4, pp. 548-556.
21. Cheng W. K., Hamrin D., Heywood J. B., Hochgreb S., Min K., and Norris M.,. (1993). An Overview of Hydrocarbon Emissions Mechanisms in Spark-Ignition Engines. SAE Technical Paper No 932708
22. Kaiser E. W., Siegl W. 0., Cotton D. F., and Anderson R. F., (1995). Effect of Fuel Structure on Emissions from a Spark-Ignited Engine. 2. Naphtene and Aromatic Fuels, Environ Sci. Technol. 26, 1581.
23. Sorab J., Holdeman H. A., and Chul G. K., (1993). Viscosity Prediction for Multigrade Oils, SAE Technical Paper No. 932833.
24. Taylor R. I., Brown M. A., Thompson D. M., and Bell J. C., (1994). The influence of Lubricant Rheology on Friction in the Piston Ring-Pack, SAE Technical Paper No. 941981
25. Wright B., van Os N. M., and Lyons J. A., (1983). European Activity Concerning Engine Oil Viscosity Classification-Part IV-The Effects of Shear Rate and Temperature on the Viscosity of Multigrade Oils, SAE Technical Paper No. 830027
26. Taylor R. I., Brown M. A., Thompson D. M., and Bell J. C., (1994). The influence of Lubricant Rheology on Friction in the Piston Ring-Pack, SAE Technical Paper No. 941981