Comparison of single and dual spray fuel injectors during cold start of a PFI spark ignition engine using visualization of liquid fuel films and pool fires

SAE Technical Papers

Volumn , Issue , 2005, Pages

  Witze, Peter O ^a   Green, Robert M ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; ENGINE CYLINDERS; FUEL INJECTION; FUEL PURIFICATION; LAKES; LIQUID FUELS; POWERTRAINS; SOOT; VIDEO RECORDING;

COMBUSTION CHAMBER WALLS; COMPARATIVE STUDIES; COOLANT TEMPERATURE; INDIRECT MEASURE; LASER INDUCED FLUORESCENCE; SINGLE-CYLINDER RESEARCH ENGINES; UNBURNED HYDROCARBONS; VISIBLE EMISSIONS;

INTAKE VALVES;

EID: 85072454006     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2005-01-3863     Document Type: Conference Paper

References (30)

1. Takeda, K., Yaegashi, T., Sekiguchi, K., and Saito, K., "Mixture Preparation and HC Emissions of a 4-Valve Engine with Port Fuel Injection During Cold Starting and Warm-Up," SAE Paper No. 950074, 1995.
2. Kosowski, M. G., "Soot Formation in a Multipoint-Fuel-Injected Spark-Ignited Engine," Trans. SAE 94, Sec. 2, p. 786, 1985.
3. Quader, A. A., "How Injector, Engine, and Fuel Variables Impact Smoke and Hydrocarbon Emissions with Port Fuel Injection," Trans. SAE 98, Sec. 4, p. 327, 1989.
4. Fry, M. D., and Nightingale, C. J. E., "Use of High-Speed Photography to Study In-Cylinder Mixture Preparation on a Four-Valve SI Engine," Proceedings of IMechE Seminar on Measurement and Observation Analysis of Combustion in Engines," p. 85, 1994.
5. Fry, M., Nightingale, C., and Richardson, S., "High-Speed Photography and Image Analysis Techniques Applied to Study Droplet Motion within the Porting and Cylinder of a 4-Valve SI Engine," SAE Paper No. 952525, 1995.
6. Hardalupas, Y., Taylor, A. M. K. P., Whitelaw, J. H., Ishii, K., Miyano, H., and Urata, Y., "Influence of Injection Timing on In-Cylinder Fuel Distribution in a Honda VTEC-E Engine," SAE Paper No. 950507, 1995.
7. Shin, Y., Cheng, W. K., and Heywood, J. B., "Liquid Gasoline Behavior in the Engine Cylinder of a SI Engine," SAE Paper No. 941872, 1994.
8. Saito, K., Sekiguchi, K., Imatake, N., Takeda, K., and Yaegashi, T., "A New Method to Analyze Fuel Behavior in a Spark Ignition Engine," SAE Paper No. 950044, 1995.
9. Nogi, T., Ohyama, Y., Yamauchi, T., and Kuroiwa, H., "Mixture Formation of Fuel Injection Systems in Gasoline Engines," SAE Paper No. 880558, 1988.
10. Nogi, T., Ohyama, Y., and Yamauchi, T., "Effects of Mixture Formation of Fuel Injection Systems in Gasoline Engine," SAE Paper No. 891961, 1989.
11. Ohyama, Y., Ohsuga, M., and Kuroiwa, H., "Study of Mixture Formation and Ignition Process in Spark Ignition Engine Using Optical Combustion Sensor," Trans. SAE, 99, Sec. 3, p. 2002, 1990.
12. Witze, P. O., "Diagnostics for the Study of Cold Start Mixture Preparation in a Port Fuel-Injected Engine," SAE Paper No. 1999-01-1108, 1999.
13. Ohyama, Y., Nogi, T., and Ohsuga, M., "Effects of Fuel/Air Mixture Preparation on Fuel Consumption and Exhaust Emission in a Spark Ignition Engine," IMech E Paper C389/232, p. 59, 1992.
14. Song, K., Clasen, E., Chang, C., Campbell, S., and Rhee, K. T., "Post-Flame Oxidation and Unburned Hydrocarbon in a Spark-Ignition Engine," SAE Paper No. 952543, 1995.
15. Werlberger, P., Rokita, R., and Chmela, F., "Observation of Fuel Injection and Combustion by Use of an Endoscopic Video System," Proceedings of IMechE Seminar-Measurement and Observation Analysis of Combustion in Engines, p. 39, 1994.
16. Felton, P. G., Kyritsis, D. C., and Fulcher, S. K., "LIF Visualization of Liquid Fuel in the Intake Manifold During Cold Start," SAE Paper No. 952464, 1995.
17. Witze, P. O., and Green, R. M., "LIF and Flame-Emission Imaging of Liquid Fuel Films and Pool Fires in an SI Engine During a Simulated Cold Start," SAE Paper No. 970866.
18. Bowditch, F. W., "A New Tool for Combustion Research: A Quartz Piston Engine," Trans. SAE 69, p. 17, 1961.
19. Sunnarborg, D. A., "Quick Release Engine Cylinder," U.S. Patent No. 6,158,406, 2000.
20. Bates, S. C., "A Transparent Engine for Flow and Combustion Visualization Studies," SAE Paper No. 880520, 1988.
21. Espey, C., and Dec, J. E., "Diesel Engine Combustion Studies in a Newly Designed Optical-Access Engine Using High-Speed Visualization and 2-D Laser Imaging" SAE Paper No. 930971, 1993.
22. Witze, P. O., and Green, R. M., "Techniques for Enhancing the Observation of PFI Spray Patterns in a Bench-Top Spray Rig," Proceedings of The Fourth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines (COMODIA 98), Kyoto, 1998.
23. Quader, A. A., "Single-Cylinder Engine Facility to Study Cold Starting-Results with Propane and Gasoline," SAE Paper No. 92001, 1992.
24. Xybion Electronic Systems Corporation, "Electronically Gated Intensified CCD Video Camera User's Manual, Model ISG-350," 1992.
25. Witze, P. O., and Green, R. M., "LIF Visualization of Liquid Fuel in the Cylinder of a Spark Ignition Engine," Proceedings of the Eighth International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 1996.
26. Summers, T., and Collings, N., "Modelling the Transit Time of a Fast Response Flame Ionization Detector During In-Cylinder Sampling," SAE Paper No. 95016, 1995.
27. Witze, P. O., "Qualitative Laser-Induced Incandescence Measurements of Soot Emissions During Transient Operation of a Port Fuel-Injected Engine," Proceedings of The Fifth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines (COMODIA 2001), Nagoya, 2001.
28. Asmus, T., Chrysler Corporation, private communication, 1996.
29. Dodge, L. G., "Fuel Preparation Requirements for Direct-Injected Spark-Ignition Engines," SAE Paper No. 962015, 1996.
30. Brown, C. N., and Ladommatos, N., "A Numerical Study of Fuel Evaporation and Transportation in the Intake Manifold of a Port-Injected Spark-Ignition Engine," Proc. IMechE, Journal of Automobile Engineering, 205, No. D3, p. 161, 1991.