Development of a semi-detailed kinetics mechanism for the autoignition of iso-octane

SAE Technical Papers

Volumn , Issue , 1996, Pages

  Roberts, Charles E ^a   Matthews, Ronald D ^a   Leppard, William R ^b  

^a UNIVERSITY OF TEXAS   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION RATIO (MACHINERY); ENGINES; POLYOLS;

AUTOIGNITION MODEL; DEGENERATE CHAIN BRANCHING REACTIONS; ENGINE OPERATING CONDITIONS; HIGH-TEMPERATURE REACTION; NUMERICAL PREDICTIONS; OPERATING CONDITION; REACTIVITY PREDICTION; SPARK IGNITION ENGINE MODELING;

REACTION INTERMEDIATES;

EID: 85072452952     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/962107     Document Type: Conference Paper

References (34)

1. Leppard, W.R., (1992), "The autoignition chemistries of Primary Reference Fuels, olefin/paraffin binary mixtures, and non-linear Octane blending" SAE Paper 922325.
2. Li, H., Miller D.L., and Cernansky N.P., (1992), "A study on the application of a reduced chemical reaction model to motored engines for heat release prediction" SAE Paper 922328.
3. Li, H., Miller D.L., and Cernansky N.P., (1996), "Development of a reduced chemical kinetic model for prediction of preignition reactivity and autoignition of Primary Reference Fuels" SAE Paper 960498.
4. Kirsch, L.J., and Quinn C.P., (1976), "A fundamentally-based model of knock in the gasoline engine" 16th Symposium (International) on Combustion, the Combustion Institute, Pittsburgh, pp. 233-244.
5. Halstead, M.P., Kirsch L.J., and Quin C.P., (1977), "The autoignition of hydrocarbon fuels at high temperatures and pressure-fitting of a mathematical model" Combustion and Flame 30: 45-60.
6. Hirst, S.L., and Kirsch L.J., (1980), "The application of a hydrocarbon autoignition model in simulating knock and other engine combustion phenomena" Combustion Modeling in Reciprocating Engines (Mattavi J.M., and Amann C.A., eds.), Plenum Press, New York, pp. 193-229.
7. Cox, R.A., and Cole J.A., (1985), "Chemical aspects of the autoignition of hydrocarbon-air mixtures" Combustion and Flame 60: 109-123.
8. Hu, H., and Keck J.C., (1987), "Autoignition of adiabatically compressed combustible gas mixtures" SAE Paper 872110, also in SAE Trans. Vol. 91.
9. Pitz, W.J., Westbrook C.K., and Leppard W.R., (1991), "Autoignition chemistry of C4 olefins under motored engine conditions: a comparison of experimental and modeling results" SAE Paper 912315.
10. Curran, H.J., Gaffuri P., Pitz W.J., Westbrook C.K., and Leppard W.R., (1995), "Autoignition chemistry of the hexane isomers: an experimental and kinetic modeling study" SAE Paper 952406
11. Curran, H.J., Gaffuri P., Pitz W.J., Westbrook C.K., and Leppard W.R., (1996), "Autoignition chemistry in a motored engine: an experimental and kinetic modeling study" presented at the 26th International Symposium on Combustion, submitted for publication.
12. Cowart, J.S., Keck J.C., Heywood J.B., Westbrook C.K., and Pitz W.J., (1990), "Engine knock predictions using a fully-detailed and a reduced chemical kinetic mechanism" 23rd Symposium (International) on Combustion, the Combustion Institute, Pittsburgh, pp. 1055-1062.
13. Ranzi, E., Gaffuri P., Faravelli T., and Dagaut P., (1995), "A wide range modeling study of n-heptane oxidation" Combustion and Flame 103: 91-106.
14. Matthews, R.D., (1991), "Knock modeling using a quasidimensional engine code" presentation to the 16th Meeting of the DOE Knock Working Group, Drexel University, Philadelphia, April.
15. Matthews, R.D., (1991), "Some physical and chemical issues in knock" presentation to the 17th Meeting of the DOE Knock Working Group, UNOCAL, Brea, CA, Nov.
16. Matthews, R.D., (1992), "The last 10% burned, hydrocarbon speciation, and knock" presentation to the 18th Meeting of the DOE Knock Working Group, Princeton University, Princeton, NJ, May.
17. Lucht, R.P., and Dunn-Rankin D., (1988), "CARS measurements of thermal boundary layer development in an internal combustion engine," presented at the Spring Meeting of the Western States Section of the Combustion Institute, Paper WSS/CI 88-56.
18. Ferguson, C.R., Green R.M., and Lucht R.P., (1986), "Unburned gas temperatures in an internal combustion engine II: Heat release computations" Combustion Science & Technology 55: 63-81.
19. Matthews, R.D., and Chin Y.W., (1991), "A fractal-based SI engine model: comparisons of predictions with experimental data" SAE Paper 910079, also in Journal of Engines 100 (3): 99-117 (1992).
20. Wu, C.-M., Roberts C.E., Matthews R.D., and Hall M.J., (1993), "Effects of engine speed on combustion in SI engines: comparisons of predictions of a fractal burning model with experimental data," SAE Paper 932714; also in Journal of Engines 102 (3): 2277-2291 (1994).
21. Roberts, C.E., and Matthews R.D., "Development and application of an improved ringpack model for hydrocarbon emissions studies" SAE Paper 961966.
22. Kee, R.J., Miller J.A., and Jefferson T.H., (1980), "CHEMKIN:A general purpose, problem-independent, transportable, Fortran chemical kinetics code package" Sandia National Laboratories report SAND80-8003.
23. Kee, R.J., Warnatz, J., and Miller, J.A., (1983), "A FORTRAN Computer Code Package for the Evaluation of Gas-Phase Viscosities, Conductivities, and Diffusion Coefficients" Sandia National Laboratories Report SAND83-8209.
24. Brown, P.N., Byrne G.D., and Hindmarsh A. C., (1989), "VODE: A Variable Coefficient ODE Solver," SIAM J. Sci. Stat. Comput. Vol. 10. pp. 1038-1051. Also, LLNL Report UCRL-98412, June 1988.
25. Cernansky, N.P., Green R.M., Pitz W.J., and Westbrook C.K., (1986), "Chemistry of fuel oxidation preceding end-gas autoignition" Combustion Science and Technology 50: 3-.
26. Chevalier, C., Pitz W.J., Westbrook C.K., and Melenk H., (1992), "Hydrocarbon ignition: automatic generation of reaction mechanisms and applications to modeling engine knock" Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 93-101.
27. Westbrook, C.K., and Pitz W.J., (1991), "The chemical kinetics of engine knock" Lawrence Livermore National Labs E&TR, Feb-March: 1-13.
28. Westbrook, C.K., and Pitz W.J., (1993), "A chemical kinetic mechanism for the oxidation of paraffinic hydrocarbons needed for Primary Reference Fuels" Paper UCRL-JC-112696, presented at the Spring Meeting of the Western States Section of the Combustion Institute, Salt Lake City, Utah.
29. Westbrook, C.K., Pitz W.J., and Leppard W.R., (1991), "The autoignition chemistry of paraffinic fuels and pro-knock and anti-knock additives: a detailed chemical kinetic study" SAE Paper 912314.
30. Held T.J., Callahan C., and Dryer F.L., (1996), "A semi-empirical reaction mechanism for n-heptane oxidation and pyrolysis" Combustion Science and Technology, in press.
31. Frenklach M., Wang H., Yu C.-L., Goldenberg M., Bowman C.T., Hanson R.K., Davidson D.F., Chang E.J., Smith G.P., Golden D.M., Gardiner W.C, and Lissianski V., (1995), "An optimized detailed chemical reaction mechanism for methane oxidation" Gas Rsearch Institute Topical Report No. GRI/950058.
32. Benson, S.W., (1981), "The kinetics and thermochemistry of chemical oxidation with application to combustion and flames" Progress in Energy and Combustion Science 7: 125-134.
33. Wagner, A.F., Sarzynski D., and Gutman D., (1990), "Experimental and Theoretical Studies of the C2H5 + O2 Reaction Kinetics" Journal of Physical Chemistry, v 94, 1853-1868.
34. Kaiser, E.W., (1995), "Temperature and Presuure Dependence of the C2H4 Yield from the Reaction C2H5 + O2" Journal of Physical Chemistry, v 99, 707-711.