Simulation of combustion in direct-injection low swirl heavy-duty type diesel engines

SAE Technical Papers

Volumn , Issue , 1999, Pages

  Schihl, Peter J ^a   Bryzik, Walter ^a   Schwarz, Ernest ^a   Atreya, Arvind ^b  

^a U S Army TACOM RD and e Center   (United States)

^b UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DIESEL ENGINES; ENGINE CYLINDERS; FIGHTER AIRCRAFT; FLAME RESEARCH; FUELS; IGNITION; MIXING;

DIRECT INJECTION DIESEL ENGINES; FUEL CONSUMPTION RATES; HEAT RELEASE RATE (HRR); LARGE SCALE TURBULENCE; MULTICYLINDER ENGINE; SINGLE-CYLINDER RESEARCH ENGINES; TIME-SCALE APPROACH; TWO-PHASE COMBUSTION;

DIRECT INJECTION;

EID: 85072441304     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/1999-01-0228     Document Type: Conference Paper

References (73)

1. Amsden, A.A, Butler, T.D., O'Rourke, P.J., and Ramshaw, J.D., "KIVA-A Comprehensive Model for 2-D and 3-D Engine Simulations" SAE Paper 850554, 1985.
2. Amsden, A.A., O'Rourke, P.J., and Butler, T.D., "KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays" U.S. Department of Commerce Report, Los Alamos National Laboratory, May 1989.
3. Amsden, A.A., "KIVA-3: A Kiva Program with Block-Structured Mesh for Complex Geometries" Los Alamos National Laboratory, March 1993.
4. Spalding, D.B., "Mixing and Chemical Reaction in Steady, Confined Turbulent Flames" Thirteenth International Symposium on Combustion, The Combustion Institute, Pittsburgh, p. 643, 1970.
5. Spalding, D.B., "Development of the Eddy-Breakup Model of Turbulent Combustion" Sixteenth International Symposium on Combustion, The Combustion Institute, Pittsburgh, p. 1657, 1976.
6. Magnussen, B.F., and Hjertager, B.H., "On Mathematical Modeling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion" Sixteenth International Symposium on Combustion, The Combustion Institute, Pittsburgh, p. 719, 1976.
7. Abraham, J., Bracco, F.V., and Reitz, R.D., "Comparisons of Computed and Measured Premixed Charge Engine Combustion" Combustion and Flame, vol. 60, p. 309-322, 1985. (Pubitemid 15528498)
8. Kong, S.-C., Zhiyu, H., and Reitz, R.D., "The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation" SAE Paper 950278, 1995.
9. Kong, S.-C., Ayoub, N., and Reitz, R., "Modeling Combustion in Compression Ignition Homogeneous Charge Engines" SAE Paper 920512, 1992.
10. Kong, S.-C., and Reitz, R.D., "Multidimensional Modeling of Diesel Ignition and Combustion Using a Multistep Kinetics Model" J. of Engrg. Gas Turbines and Power, vol. 115, p. 781-789, 1993.
11. Probert, R.P., "The Influence of Spray Particle Size and Distribution in the Combustion of Oil Droplet" Phil. Mag., ser. 7, vol. 37, no. 265, p. 94-105, 1946.
12. Tanasawa, P.H., "On the Combustion Rate of a Group of Fuel Particles" Tech. Report Tohoko Univ., vol. 18, no. 1,p. 61-74, 1953.
13. Austen, A.E.W., and Lyn, W.T., "Relation Between Fuel Injection and Heat Release in a Direct Injection Engine and the Nature of the Combustion Processes" Institution of Mechanical Engineers,Automotive Division, no. 1, p. 47-62, 1960-61.
14. Lyn, W.T., "Study of the Burning Rate and Nature of Combustion in Diesel Engines" Nineth International Symposium on Combustion, The Combustion Institute, Pittsburgh, p. 1069-1082, 1962.
15. Cook, H.A., "Appraisal of Effects of Operating Conditions and Engine Design on Combustion in Reciprocating Engines by Engine Cycle Calculations" SAE Paper 630083, 1963.
16. Cook, H.A., "Diesel Engine Cycle Analysis of Relationships of Fuel Injection to Fuel Compression-Ignition Characteristics and Best Fuel Utilization" SAE Paper 650449, 1965.
17. Nagao, F., Ikegami, M., and Oshima, K., "An Analysis of Combustion Knock in a Diesel Engine" Bulletin J. Soc. Mech. Engrs., vol. 10, no. 39, p. 532-542, 1967.
18. Shipinski, J., Meyers, P.S., and Uyehara, O.A., "A Spray Droplet Model for Diesel Combustion" Symposium on Diesel Engine Combustion, Institution of Mechanical Engineers, vol. 184, Pt. 3J,p. 28-35, 1969-70.
19. Shipinski, J., Uyehara, O.A., and Myers, P.S., "Experimental Correlation Between Rate-of-Injection and Rate-of-Heat Release in a Diesel Engine" ASME Paper 68-DGP-11, 1968.
20. Whitehouse, N.D., and Way, R., "Rate of Heat Release in Diesel Engine and its Correlation With Fuel Injection Data" Symposium on Diesel Engine Combustion, Institution of Mechanical Engineers, vol. 184, Pt 3J, p. 17-27, 1969-70.
21. Whitehouse, N.D., and Way, R.J.B., "A Simple for the Calculation of Heat Release Rates in Diesel Engines Based on the Fuel Injection Rate" SAE Paper 710134, 1971.
22. Whitehouse, N.D., and Sareen, B.K., "Prediction of Heat Release in a Quiescent Chamber Diesel Engine Allowing for Fuel/Air Mixing" SAE Paper 740084, 1974.
23. Grigg, H.C., and Syed, M.H., "The Problem of Predicting Rate of Heat Release in Diesel Engines" Symposium on Diesel Engine Combustion, Institution of Mechanical Engineers, vol. 184, Pt 3J, p. 192-202, 1969-70.
24. Khan, I.M, Greeves, G., and Probert, D.M., "Prediction of Soot and Nitric Oxide Concentrations in Diesel Engine Exhaust" Air Pollution in Transport Engines, Institution of Mechanical Engineers, Paper C142/71, p. 205-217, 1971.
25. Bastress, E.K., Chng, K.M., and Dix, D.M., "Models of Combustion and Nitrogen Oxide Formation in DI and IDI Compression Ignition Engine" SAE Paper 719053, 1971.
26. Abramovich, G.N., The Theory of Turbulent Jets, MIT Press, 1963.
27. Adler, D., and Lyn, W.T., "The Evaporation and Mixing of a Liquid Fuel Spray in a Diesel Air Swirl" Symposium on Diesel Engine Combustion, Institution of Mechanical Engineers, vol. 184, Pt. 3J, p. 171-180, 1969-70.
28. Rife, J.M., and Heywood, J.B., "Photographic and Performance Studies of Diesel Combustion Using a Rapid Compression Machine" SAE Paper 740948, 1974.
29. Packer, J.P., Wallace, F.J., Adler, D., and Karimi, E.P., "Diesel Fuel Jet Mixing Under High Swirl Conditions" Institution of Mechanical Engineers, Paper C80/83, p. 9-22, 1980.
30. Shahed, S.M., Chiu, W.S., and Yumlu, V.S., "A Preliminary Model for the Formation of Nitric Oxide in DI Diesel Engines and its Application in Parametric Studies" SAE Paper 730083, 1973.
31. Shahed, S.M., Chiu, W.S., and Lyn, W.T., "A Mathematical Model of Diesel Combustion" Institution of Mechanical Engineers, Paper C94/75, p. 119-128, 1975.
32. Chiu, W.S., Shahed, S.M., and Lyn, W.T., "A Transient Spray Mixing Model for Diesel Combustion" SAE Paper 760128, 1976.
33. Hodgetts, D., and Shroff, H.D., "More on the Formation of Nitric Oxide in a Diesel Engine" Combustion in Engines, Institution of Mechanical Engineers, Paper C95/75, p. 129-138, 1975.
34. Hiroyasu, H., and Kadota, T., "Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines" SAE Paper 760129, 1976.
35. Maguerdichian, M., and Watson, N., "Prediction of Mixture Formation and Heat Release in Diesel Engines" SAE Paper 780225, 1978.
36. Dent, J.C., and Mehta, P.S., "Phenomenological Combustion Model for a Quiscent Chamber Diesel Engine" SAE Paper 811235, 1981.
37. Dent, J.C., Mehta, P.S., and Swan, J., "A Predictive Model for Automotive DI Diesel Engine Performance and Smoke Emissions" Institution of Mechanical Engineers, Paper C126/82, p. 237-245, 1982.
38. Kyriakides, S.C., Dent, J.C., and Mehta, P.S., "Phenomenological Diesel Combustion Model Including Smoke and NO Emissions" SAE Paper 860330, 1986.
39. Hiroyasu, H., Kadota, T., and Arai, M., "Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions" Bulletin of JSME, vol. 26, no. 214, p. 569-576, 1983.
40. Lipkea, W.H., and DeJoode, A.D., "A Model of a Direct Injection Diesel Combustion System for Use in a Cycle Simulation and Optimization Studies" SAE Paper 870573, 1987.
41. Kouremenos, D.A., Rakopoulos, C.D., and Karvounis, E., "Thermodynamic Analysis of Direct Injection Diesel Engines by Multi-zone Modelling" ASME Winter Annual Meeting, AES-vol 3.3, p. 67-77, 1987. (Pubitemid 18554848)
42. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D., "Modeling of Spray Mixing in a Quiescent Chamber Diesel Allowing for Jet Wall Impingement" Proc. Intern. AMSE-France Conf., Naples, vol. 3.3, p. 199-206, 1986.
43. Ottikkutti, P., Gerpen, J.V., and Cui, R.R., "Multizone Modelling of a Fumigated Diesel Engine" SAE Paper 910076, 1991.
44. Rakopoulos, C.D., Hountalas, D.T., Taklis, G.N., and Tzanos, E.I., "Analysis of Combustion and Pollutants Formation in a Direct-Injection Diesel Engine Using a Multizone Model" International Journal of Energy Research, vol. 19, p. 63-88, 1995.
45. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D.T., "Multi-Zone Modelling for the Prediction of Pollutants Emissions and Performance of DI Diesel Engines" SAE Paper 970635, 1997.
46. Bazari, Z., "A DI Diesel Combustion and Emission Capability for Use in a Cycle Simulation" SAE Paper 920462, 1992.
47. Mehta, P.S., Singal, S.K., and Pundir, B.P., "Comprehensive Simulation Model for Mixing and Combustion Characteristics of Small Direct Injection Diesel Engines" Institution of Mechanical Engineers, Journal of Automobile, vol. 209, no. 2, Pt. D, p. 117-126, 1995.
48. Hiraki, H., and Rife, J.M., "Performance and NOx Model of a Direct Injection Stratified Charge Engine" SAE Paper 800050, 1980.
49. Blizzard, N.C., and Keck, J.C., "Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engines" SAE Paper 740191, 1974.
50. Tabaczynski, R., Ferguson, C., and Radhakrishnan, K., "A Turbulent Entrainment Model for Spark-Ignition Engine Combustion" SAE Paper 770647, 1977.
51. Kono, S., Nagao, A., and Motooka, H., "Prediction of In-Cylinder Flow and Spray Formation Effects on Combustion in Direct Injection Diesel Engines" SAE Paper 850108, 1985.
52. Li, Q., and Assanis, D.N., "Quasi-Dimensional Combustion Model for Diesel Engine Simulation" 15th Annual Fall Technical Conference of ASME ICE, vol. 20, p. 109-118, 1993.
53. Watson, N., Pilley, A.D., and Marzouk, M., "A Combustion Correlation for Diesel Engine Simulation" SAE Paper 800029, 1980.
54. Assanis, D.N., and Heywood, J.B., "Development and Use of a Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies" SAE Paper 860329, 1986.
55. "VIPRE-Virtual Indicated Performance of Reciprocating Engines-Version 2.11 User's Manual" Southwest Research Institute, 1998.
56. Breuer, C., "The Influence of Fuel Properties on the Heat Release in DI-Diesel Engines" Fuel, vol. 74, no. 12, p. 1767-71, 1995.
57. Craddock, J.P., and Hussain, M., "A Rate of Heat Release for Highly Charged Diesel Engines" SAE Paper 860083, 1986.
58. Schihl, P., Bryzik, W., Atreya, A., "A Large Scale Mixing Model for a Quiescent Chamber Direct Injection Diesel" SAE Paper 961040, 1996.
59. Schihl, P., "Development of Global Models for Ignition, Mixing, and Combustion in Quiescent Chamber, Direct Injection Diesel Engines" Ph.D. Thesis, University of Michigan, 1998.
60. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, Inc., 1988.
61. Duffy, K., and Mellor, A.M., "Engineering Model Development for Diesel Performance and Emissions" Interim Technical Report, U.S. Army Research Office, 1995.
62. Hiroyasu, H., And, Arai, M., "Fuel Spray Penetration and Spray Angle in Diesel Engines" Trans. of the SAE of Japan, vol. 21, p. 5-11, 1980.
63. Ruiz, F., And, Chigier, N., "Parametric Experiments on Liquid Jet Atomization Spray Angle" Atomization and Sprays, vol. 1, p. 23-45, 1991.
64. Reitz, R.D., and Bracco, F.V., "On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions" SAE Paper 790494, 1979.
65. LeFeuvre, T., Meyers, P.S., and Uyehara, O.A., "Experimental Heat Fluxes in a Diesel Engine and Their Correlation" SAE Paper 690464, 1969.
66. Dent, J.C., and Sulaiman, S.J., "Convective and Radiative Heat Transfer in a High Swirl Direct Injection Diesel Engine" SAE Paper 770407, 1977.
67. Annand, W.J.D., "Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines" Institution of Mechanical Engineers, vol. 177, no. 36, p. 973-990, 1963.
68. Dimotakis, P.E., "Turbulent Free Shear Layer Mixing and Combustion" High Speed Flight Propulsion Systems, edited by Murthy S.N.B., and Curran E.T., Progress in Astronautics and Aeronautics, vol. 137, 1991.
69. Tennekes, H., and Lumley, J.L., A First Course in Turbulence, MIT Press, 1972.
70. PEI Consultants, PEI Cycle Analysis: Version 884, Madison, Wisconsin, 1989.
71. Schwarz, E., Reid, M., Bryzik, W., and Danielson, E., "Combustion and Performance Characteristics of a Low Heat Rejection Engine" SAE Paper 930988, 1993.
72. Homsy, S., and Atreya, A., "An Experimental Heat Release Rate Analysis of a Diesel Engine Under Steady State Conditions" SAE Paper 970890, 1997.
73. Hoag, K.L., "Development of a Low Heat Rejection Engine" U.S. Army TACOM R&D Center, Report no. 1345, September, 1989.