An overview of microalloyed steels, part I: Metallurgical aspects

SAE Technical Papers

Volumn , Issue , 1996, Pages

  Yang, Linsheng ^a   Fatemi, Ali ^b   Rhoda, Don A ^a   Tripp, James E ^a  

^a DANA Corporation

^b UNIVERSITY OF TOLEDO   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COST EFFECTIVENESS; MICROSTRUCTURE; STEELMAKING;

METALLURGICAL VARIABLES; MICRO-STRUCTURAL PROPERTIES; MICROALLOYED STEELS; PROPERTY IMPROVEMENT; REVIEW PAPERS; STEEL MICROSTRUCTURE; STRENGTHENING MECHANISMS; UNDERLYING PRINCIPLES;

MICROALLOYING;

EID: 85072438743     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/960308     Document Type: Conference Paper

References (77)

1. Noren, T. M., Special report on columbium as a microalloying element, in steels and its effect on welding technology, Ship Structure Committee, Washington D.C., 1963.
2. Metallurgical Developments in Carbon Steels, Iron and Steel Institute, special report 81, London, UK, 1963.
3. Effective Utilization of Yield Strength, Iron and Steel Institute, special report, London, UK, 1966.
4. Strong, Tough Structural Steels, Iron and Steel Institute, special report 104, London, UK, 1967.
5. Designing in High Strength Steels, Iron and Steel Institute special report 122, London, UK, 1969.
6. Low Alloy High Strength Steels, The Metallurgy Company, New York, NY, 1970.
7. Gray, J. M., Editor, Processing and Properties of Low Carbon Steels, Metallurgical Society of AIME, New York, NY, 1973.
8. High Strength Hot Rolled Steels for Automobiles, ASM, Detroit, MI, 1972.
9. Cold Rolled HSLA Steels for Automotive Use, SAE, Detroit, MI, 1973.
10. Korchynsky, M., Editor, Microalloying 75, Union Carbide Corp., New York, NY, 1977.
11. Rothwell, A. B., and Gray J. M., Editors, Welding of HSLA (Microalloyed) Structural Steels, AIM/ASM, ASM, Metals Park, OH, 1976.
12. Ballance, J. B., Editor, Hot Deformation of Austenite, Metallurgical Society of the AIME, New York, NY, 1977.
13. HSLA Steels-Experiences in Applications, SFM/SIME, Versailles, France, 1979.
14. Advances in the Physical Metallurgy and Applications of Steels, Metals Society (Book 284), London, UK, 1982.
15. Stuart, H., Editor, Niobium, Metallurgical Society of the AIME, Warrendale, PA, 1984.
16. Steels for Line Pine and Pipeline Fittings, Metals Society (Book 285), London, UK, 1983.
17. DeArdo, A. J., Ratz G. A., and Wray P. J., Editors, Thermomechanical Processing of Microalloyed Austenite, Metallurgical Society of AIME, Warrendale, PA, 1982.
18. Korchynsky, M., Editor, HSLA Steels: Technology and Application, ASM, Metals Park, OH, 1984.
19. Dunne, D. P., and Chandra T., Editors, High Strength Low Alloy Steels, AIME/AIM, Wollongong, N. S. W., Australia, 1985.
20. Southwick, P. D., Editor, Accelerated Cooling of Steel, Metallurgical Society of AIME, Warrendale, PA, 1986.
21. Gray J. M., Ko T., Zhang S., Wu B., and Xie X., Editors, HSLA 85, HSLA Steels: Metallurgy and Applications, ASM, Metals Park, OH, 1986.
22. Krauss, G., and Banerji S. K., Editors, Fundamentals of Microalloying Forging Steels, Metallurgical Society of AIME, Warrendale, PA, 1987.
23. Ruddle, G. E., and Crawley A. F., Editors, Accelerated Cooling of Rolled Steel, Pergamon Press, Elmsford, NY, 1987.
24. DeArdo, A. J., Editor, Processing, Microstructure and Properties of HSLA Steels, The Minerals, Metals and Materials Society/AIME, Warrendale, PA, 1988.
25. Microalloying'88, Microalloyed HSLA Steels, ASM International, Metals Park, OH, 1989.
26. Finn, M., Editor, Microalloyed Bar and Forging Steels, CIM/AIME, CIM, Montreal, Canada, 1990.
27. HSLA 90, HSLA Steels-Metallurgy and Applications, The International Conference held in Beijing, PRC, 1990.
28. Woodhead, J. H., and Keown S. R., The history of microalloyed steels, cite 21, pp. 15-28.
29. Gray, J. M., and Ko T., Conference summary and closing remarks, cite 21, pp. 1021-1026.
30. Hansen, S. S., Justification for the use of HSLA steels in various applications, cite 25, pp. 31-42.
31. Meyer, L., StraBburger C., and Schneider C., Effect and present application of the microalloying elements Nb, V, Ti, Zr, and B in HSLA steels, cite 21, pp. 29-44.
32. Tamaka, T., Four stages of the thermomechanical processing in HSLA steels, cite 19, pp. 6-16.
33. DeBoer, H., et al., Thermomechanical treatment of HSLA steels-fundamentals and realization, cite 21, pp. 539-550.
34. Sellars, C. M., Options and constraints for thermomechanical processing of microalloyed steel, cite 21, pp. 73-82.
35. Cohen, M., and Hansen S. S., On the fundamentals of HSLA steels, cite 21, pp. 61-72.
36. Hansen, S. S., Microalloyed plate and bar products: production technology, cite 22, pp. 155-174.
37. Honeycombe, R. W. K., Carbide precipitation in HSLA steels, cite 24, pp. 1-14.
38. Honeycombe, R. W. K., Fundamental aspects of precipitation in microalloyed steels, cite 21, pp. 243-250.
39. Gray, J. M., and DeArdo A. J., Austenite conditioning alternatives for microalloyed steel products, cite 21, pp. 83-96.
40. DeArdo, A. J., Ferrite formation from thermomechanically processed austenite in HSLA steels, cite 19, pp. 70-79.
41. DeArdo, A. J., An overview of microalloyed steels, Process Technology Conference Proceedings, Vol. 8, Iron and Steel Society, Warrendale, PA, 1989, pp. 67-78.
42. Repas, P. E., Metallurgical fundamentals for HSLA steels, cite 25, pp. 3-14.
43. Korchynsky, M., Microalloying and thermomechanical treatment, cite 24, pp. 169-202.
44. Pickering, F. B., The spectrum of microalloyed high strength low alloy steels, cite 18, pp. 1-32.
45. Roberts, W., Recent innovations in alloy design and processing of microalloyed steels, cite 18, pp. 33-66.
46. Pickering, F. B., Physical Metallurgy and the Design of Steels, Applied Science Publisher Ltd., London, UK, 1978.
47. Leslie, W. C., The Physical Metallurgy of Steels, McGraw-Hill, New York, NY, 1981.
48. Fletcher, E. E., High-Strength Low-Alloy Steels: Status, Selection and Physical Metallurgy, Battelle Press, Columbus, OH, 1979.
49. Araki, T., Microstructural strengthening mechanism in high strength low alloy steels, cite 21, pp. 259-272.
50. Pickering, F. B., High-strength, low-alloy steels-a decade of progress, cite 10, pp. 9-31.
51. Petch, N. J., Cleavage strength of polycrystals, Journal of Iron and Steel Institute, Vol. 174, pt. 1, pp. 25-28, 1953.
52. Heslop, J., and Petch N. J., Dislocation locking and fracture in α-iron, Philosophical Magazine, Vol. 2, No. 17, pp. 649-658, 1957.
53. Bucher, J. H., and Grozier J. D., Toughness of high-strength, hot rolled steels, Metals Engineering, Quarterly, ASME, Vol. 5, No. 4, pp. 1-6, 1965.
54. Mintz, B., and Arrowsmith J. M., Influence of microalloying additions on hot ductility of steels, in Hot Working and Forming Processes, Sellars C. M., Editor, The Metals Society, London, UK, pp. 99-103, 1980.
55. Hammer, R., and Simon R. W., Metallurgical requirements in the production of HSLA steels, cite 18, pp. 359-376.
56. Carrington, W., Hale K. F., and McLean D., Arrangement of dislocation in iron, Royal Society of London, Proceedings Series A, Vol. 259, No. 1297, pp. 203-227, 1960.
57. Keh, A. S., Direct observations of imperfections in crystals, in Electron Microscopy and the Strength of Crystals, Thomas G., and Washurn J., Editors, Interscience, New York, NY, pp. 213-, 1962.
58. Meyer, L., Heisterrkamp F., and Mueschenborn W., Columbium, titanium, and vanadium in normalized, thermomechanically treated and cold-rolled steels, cite 10, pp. 153-167.
59. Speich, G. R., Cuddy J. L., Gordon C. R., and DeArdo A. J., Formation of ferrite from controlled-rolled austenite, in Phase Transformation in Ferrous Alloys, Marder A. R., and Goldstein J. I., Editors, TMS of AIME, Philadelphia, PA, pp. 341-389, 1983.
60. Cuddy, L. J., cite 17, pp. 129-.
61. Nordberg, H., and Aronsson B., Solubility of niobium carbide in austenite, Journal of Iron and Steel Institute, Vol. 206, No. 12, pp. 1263-1266, 1968.
62. Narita, K., Physical chemistry of the groups IVa (Ti, Zr), Va (V, Nb, Ta) and the rear earth elements in steel, Transactions of the Iron and Steel Institute of Japan, Vol. 15, No. 3, pp. 145-152, 1975.
63. Pickering, F. B., and Gladman T., Investigation into some factors which control strength of carbon steels, cite 2, pp. 10-20.
64. Foct, J., and Hendry A., Editors, High Nitrogen Steels-HNS 88. Institute of Metals, London, UK, 1988.
65. Stuart, H., The properties and processing of microalloyed HSLA steels, JOM: Journal of the Minerals, Metals, and Materials Society, Vol. 43, No. 1, pp. 35-40, 1991.
66. Kozasu, I., Recent development of microalloyed steel plates, cite 18, pp. 593-608.
67. Paules, J. R., Developments in HSLA steel products, JOM: Journal of the Minerals, Metals, and Materials Society, Vol. 43, No. 1, pp. 41-44, 1991.
68. Sen, S., Verma R. S., Sengupta A. K., and Ramaswamy V., Grain refinement during controlled forging of C-Mn-Nb microalloyed steel, cite 19, pp. 308-312.
69. Osuzu, H., Shiraga T., Tsujimura K., Taniguchi Y., and Kido H., Application of microalloyed steels to achieve high toughness in hot forged components without further heat treatment, SAE Technical Paper 860131, 1986.
70. Hulka, K., and Heisterkamp F., Role and implication of niobium in as-forged steels by a combination of microalloying and controlled processing, cite 22, pp. 255-268.
71. Amano, K., Hatomura T., Shiga C., Enami T., and Tanaka T., Effect of accelerated cooling condition on ferritic and subsequent second phase transformation from deformed austenite, cite 23, pp. 43-56.
72. DeArdo, A. J., Ferrite formation from thermomechanically processed austenite in HSLA steels, cite 19, pp. 70-79.
73. Underwood, E. E., Surface area and length in volume, in Quantitative Metallography, DeHoff R. T., and Rhines F. N., Editors, McGraw-Hill, New York, NY, pp. 77-127, 1968.
74. Sellars, C. M., and Beynon J. H., Microstructural development during hot rolling of titanium microalloyed steels, cite 19, pp. 142-158.
75. Blicharski, M. R., Garcia C. I., Pytel S., and DeArdo A. L., Structure and properties of ULCB plate steels for heavy section applications, cite 24, pp. 317-330.
76. Takechi, H., Matsuda H., Tamehiro H., Ohashi M., and Nakasugi H., Application of bainite and ferrite-martensite structure for high-strength heavy-gage linepipe, MiCon 82, ASTM STP 792, Abrams H., Clark E., Hood J., and Seth B., Editors, American Society for Testing and Materials, Philadelphia, PA, pp. 149-171, 1982.
77. Mano, J. I., Kato T., Aoyagi N., and Kuwagate M., Production of as-hot-rolled dual phase sheets by controlled cooling, cite 18, pp. 287-296.