Spray formation of high pressure swirl gasoline injectors investigated by two-dimensional mie and LIEF techniques

SAE Technical Papers

Volumn , Issue , 1999, Pages

  Ipp, Wolfgang ^a   Wagner, Volker ^a   Krämer, Hanno ^a   Wensing, Michael ^a   Leipertz, Alfred ^a   Arndt, Stefan ^b   Jain, Amar K ^c  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^b ROBERT BOSCH GMBH   (Germany)

^c CSIR INDIAN INSTITUTE OF PETROLEUM   (India)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOTIVE ENGINEERING;

AMBIENT CONDITIONS; AMBIENT PRESSURES; CONSTANT VOLUME CHAMBER; EVAPORATING SPRAYS; FUEL DISTRIBUTION; INJECTOR TEMPERATURES; SIMULTANEOUS DETECTION; SPRAY PARAMETERS;

GASOLINE;

EID: 85072425643     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/1999-01-0498     Document Type: Conference Paper

References (29)

1. Iwamoto Y., Noma K., Nakayama O., Yamauchi T., Ando H., Development of Gasoline Direct Injection Engine, SAE Paper 970541 (1997)
2. Kume T., Iwamoto Y., Lida K., Murakami M., Akishino K., Ando H., Combustion Control Strategies for Direct Injection SI Engine; SAE Paper 960600 (1996)
3. Andriesse D., Ferrari A., Imarisio R., Experimental Investigation on Fuel Injection Systems for Gasoline Direct Injection Engines; Direkteinspritzung im Ottomotor, HAUS DER TECHNIK, Essen, March, 1997
4. Anderson R. W., Yang J., Brehob D.D., Vallance J.K., Whiteaker R.M., Understanding the Thermodynamics of Direct Injection Sorak Ignition (DISI) Combustion Systems: An Analytical and Experimental Investigation, SAE Paper 962018 (1996)
5. Fraidl G. K., Piok W.F., Wirth M., Gasoline Direct Injection: Trends and Future Strategies for Injection and Combustion Systems, SAE Paper 960465 (1996)
6. Karl G., Kemmler R., Bargende M., Abthoff J., Analysis of a Direct Injection Gasoline Engine, SAE Paper 970624 (1997)
7. Harada J., Tomita T., Mizuno H., Mashiki Z., Ito Y., Development of Direct Injection Gasoline Engine, SAE Paper 970540 (1997)
8. Pontoppidan M., Gaviani G., Bella G., Rocco V., Direct Fuel Injection-A Study of Injector Requirements for Different Mixture Preparation Concepts, SAE Paper 970628 (1997)
9. Lefebvre A. H., Atomization and Sprays, Hemisphere Publishing Corporation, 1989
10. Ruiz F., Chigier N., The Effects of Design and Operating Conditions of Fuel Injectors on Flow and Atomization, SAE Paper 870100 (1987)
11. Gebhardt H., Zerstäubung mit Dralldüsen, Wiisenschaftliche Zeitschrift der Technischen Hochschule Dresden, 7 Heft 2, S. 249-273, 1957
12. Beer S., Haidn O.J., Sprayerzeugung mit Hohlkegeldüsen, Proc SPRAY 94, 1994
13. Münch K.-U., Zweidimensionale Mie-Streulichttechniken zur Spraydiagnose in Dieselmotoren, PhD Thesis, Universität Erlangen-Nürnberg, BEV Berichte zur Energie- und Verfahrenstechnik, Heft 93.1, ESYTEC GmbH, Erlangen, 1993
14. Wensing M., Krämer H., Münch K.-U., Leipertz A., Mixture Formation and Combustion of a Four-Valve SI Engine Investigated by Advanced Two-Dimensional Laser Measurement Techniques; Proc. COMODIA 98, pp. 379-385, 1998
15. Brenn G., Domnick J., Dorfner V., Durst F., Unsteady Gasoline Injection Experiments: Comparison of Measurements in Quiescent Air and in a Model Intake Port, SAE Paper 950512 (1995)
16. Vannobel F., Dementhon J.B., Robart D., Phase Doppler Anemometry Measurements on a Gasoline Spray inside the Inlet Port and Downstream of the Induction Valve; Steady Flow Conditions; in Laser Techniques and Applications in Fluid Mechanics, Proc. 6th Intern. Symp., Heitor M.V., Maeda M., Whitelaw J.H., Springer Verlag, 1992
17. th Symposium on Combustion, pp. 1283-1290, 1984
18. Fröba A., Rabenstein F., Münch K.-U., Leipertz A., Mixture of Triethyamine (TEA) and Benzene as a New Seeding Material for Quantitative Two-Dimensional Laser-Induced Exciplex Flourescence Imaging of Vaopr and Liquid Fuel Inside SI Engines, Combust. Flame 112, 1998, 199-209 (Pubitemid 27525675)
19. Krämer H., Münch K.-U., Leipertz A., Investigation of Fuel Evaporation Inside the Intake of a SI Engine Using Laser Induced Exciplex Fluorescence with a NEW Seed, SAE Paper 961930 (1996)
20. Yamauchi T., Wakisaka T., Computation of the Hollow-Cone Sprays from High-Pressure Swirl Injector for a Gasoline Direct Injection SI Engine, SAE Paper 962016 (1996)
21. Evers L.W., Characterization of the Transient Spray from a High Pressure Swirl Injector, SAE Paper 940188, (1994)
22. Parrish S.E., Farell P.V., Transient Spray Characteristics of a Direct Injection Spark-Ignited Fuel Injector, SAE Paper 970629 (1997)
23. Ohsuga M., Shiraishi T., Nogi T., Nakayama Y., Sukegawa Y., Mixture Preparation for Direct-Injection SI Engines, SAE Paper 970542 (1997)
24. Observation on In-Cylinder Sprays in a Firing Single-Cylin-der Direct-Injection Gasoline Engine, D irekteinspritzung im Ottomotor, Spicher U., (Hrsg.), S. 117-131, Expert-Verlag, 1998
25. Hall M.J., Matthews R:D:, In-Cylinder Flow and Fuel Transport in a 4-Valve GDI Engine: Diagnostics and Measurements, Direkteinspritzung im Ottomotor, Spicher U., (Hrsg.), S. 132-146, Expert-Verlag, 1998
26. Kakuhou A., Urushihara T., Itoh T., Takagi Y., LIF Visualization of In-Cylinder Mixture Formation in a Direct-Injection SI Engine, Proc. COMODIA 98, pp 305-310, 1998
27. Fujikawa T., Hattori Y., Akihama K., Koike M., Kobayashi T., Matsushita S., Quantitative 2-D Fuel Distribution Measurements in a Direct Injection Gasoline Engine Using Laser-Induced Fluorescence Technique, Proc. COMODIA 98, pp. 317-322, 1998
28. Wensing M., Stach T., Münch K.-U., Leipertz A., Two-Dimensional Droplet Size Distribution Measurements in Two-Phase Flows, Proc. PARTEC 98, pp. 645-654, 1998
29. Hochgreb S., Van der Wege B. A., The Effect of Fuel Volatility on Early Spray Development from High-Pressure Swirl Injectors, Direkteinspritzung im Ottomotor, Spicher U., (Hrsg.), S. 107-116, Expert-Verlag, 1998