Prediction of forming limit diagram with damage analysis

SAE Technical Papers

Volumn , Issue , 1996, Pages

  Chow, C L ^a   Yu, L G ^a   Demeri, M Y ^b  

^a UNIVERSITY OF MICHIGAN DEARBORN   (United States)

^b FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTITUTIVE EQUATIONS; FORMING; SHEET METAL; STRUCTURAL ANALYSIS; TENSILE TESTING;

ANISOTROPIC DAMAGE MODEL; DAMAGE EVOLUTION EQUATION; FORMING LIMIT DIAGRAMS; FRACTURE LIMIT DIAGRAMS; INCREMENTAL THEORY OF PLASTICITY; NONPROPORTIONAL LOADING; ORTHOTROPIC PLASTICITY; SHEET FORMING PROCESS;

FORECASTING;

EID: 85072424867     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/960598     Document Type: Conference Paper

References (46)

1. Arrieux, R., Bedrin, C., and Boiven, M., (1982), Proc. 12th IDDRG Congress, Italy, p. 61.
2. Azrin, M., Backofen, W.A., (1970), The Deformation and Failure of a Biaxially Stretched Sheet, Met. Trans. 1, 2857
3. Bammann, D.J., (1990), Modeling temperature and strain rate dependent large deformation of metals, Applied Mechanics Review, 43, S312.
4. Beaudoin, A.J., Koya, T., Smith, P.E., and Wiese, J.W., (1995), Experiences in the use of an evolutionary damage model with LS-DYNA3D, SAE 95-0915, 113.
5. Chaboche, J.L., (1984), Anisotropic creep damage in the framework of continuum damage mechanics, Nuclear Engineering and Design, 79, 309.
6. Chaboche, J.L., and Lesne, P.M., (1988), A non-linear continuous fatigue damage model, Fatigue Fract. Engng. Mater. Struct. 11, 1.
7. Chow, CL., and Lu, T.J., (1989), On evolution laws of anisotropic damage, Engineering Fracture Mechanics, 34, 53
8. Chow, C.L., and Chen, X.F., (1992), An anisotropic model of continuum damage mechanics based on endochronic theory of plasticity, International Journal of Fracture, 55, 115
9. Chow, C.L., and Wang, J., (1987 a), An anisotropic theory of elasticity for continuum damage mechanics, International Journal of Fracture, 33, 3.
10. Chow, C.L., and Wang, J., (1987 b), An anisotropic theory of continuum damage mechanics for ductile fracture, Engineering Fracture Mechanics, 27, 547.
11. Chow, C.L., and Wang, J., (1987 c), An anisotropic continuum damage theory and its application to ductile crack initiation, Damage Mechanics in Composites, ASME AD, 12, 1.
12. Chow, C.L., and Wang, J., (1988 a), Ductile fracture characterization with an anisotropic continuum damage theory, Engineering Fracture Mechanics, 30, 547.
13. Chow, C.L., and Wang, J., (1988 b), A finite element analysis of continuum damage mechanics for ductile fracture, International Journal of Fracture 38, 83.
14. Chow, C.L., and Wei, Y., (1991 a), A damage mechanics model of fatigue crack initiation in notched plates, Theory. Appl. Fract. Mech 16, 123.
15. Chow, C.L., and Wei, Y., (1991 b), A model of continuum damage mechanics for fatigue failure, Int. J. Fract. 50, 301.
16. Chow, C.L., Yu, L.G., and Duggan, B.J., (1993), An orthotropic model of damage mechanics for metal fatigue, ASME Winter Annual Meeting, New Orleans, Louisiana, U.S.A., November 28-December 3, AD-vol. 36, 1.
17. Cordebois, J.P., and Sidoroff, F., (1979), Damage induced elastic anisotropy, Euromech Colloquium 115, Comportement M, Canique des Solides Anisotropes, Grenoble, 761-774.
18. Ghosh, A. K., and Hecker, S. S., (1974), Stretching limits in sheet metals: In-plane versus out-of plane deformation, Metal. Trans 5, 2161.
19. Ghosh, A. K., and Hecker, S. S., (1975), Failure in thin sheets stretched over rigid punches, Metal. Trans. 6A, 1065
20. Gronostajski, J., Dolny, A., and Sobis, T., (1982), Proc. 12th IDDRG Congress, Italy, p. 39.
21. Gurson A.L., (1975), Plastic flow and fracture behavior of ductile materials incorporating nucleation, growth and interaction, Ph. D. thesis, Brown University, (available from University Microfilms, Ann Arbor, Michigan).
22. Gurson, A.L., (1977), Continuum theory of ductile rupture by void nucleation and growth: Part I-Yield criteria and flow rules for porous ductile materials, ASME Journal of engineering Materials and Technology, 99, p. 2.
23. Hecker, S. S., (1975 a), Simple technique for determining FLC, Sheet Metal Ind., Nov., 671.
24. Hecker, S. S., (1975 b), J Eng. Mater. Technol. (Trans. ASME, H) 97, 66.
25. Hill, R., (1950), The mathematical theory of plasticity, University Press, Oxford.
26. Hill, R., (1952), On discontinuous plastic states with special reference to localized necking in the sheet, J. Mech. Phys. Solids 1, 19.
27. Hutchinson, J.W., Neale, K. W., and Needleman, A., (1978), Sheet necking-I: Validity of plane stress assumptions of the long-wavelength approximation, in Koistinen, D.P., and Wang, N.M., ed., GMR Symposium Mechanics of Metal Forming Plenum Press, New York, p. 111.
28. Hutchinson, J.W., and Neale, K. W., (1978 a), Sheet necking-II: Time-independent behavior, in: Koistinen, D.P., and Wang, N.M., ed., GMR Symposium Mechanics of Metal Forming Plenum Press, New York, p. 127.
29. Hutchinson, J.W., and Neale, K. W., (1978 b), Sheet necking-III: Strain-rate effects, in: Koistinen, D.P., and Wang, N.M., ed., GMR Symposium Mechanics of Metal Forming Plenum Press, New York, p. 269.
30. Hutchinson, W.B., and Arthey, R., (1976), Scr. Metal. 10, 673.
31. Keeler, S. P., (1968), Machinery 74.
32. Kikuma, T., and Nakazima, K., (1971), Iron Steel Inst. Japan 11, 827.
33. Kobayashi, T., Ishigaki, H., and Abe, T., (1972), Proc. 7th IDDRG Congress, Amsterdam, 8. 1.
34. Laukonis, J.V., and Gosh, A.K., (1978), Effects of strain path changes on the formability of sheet metals, Metal. Trans. 9A, 1849.
35. Lee, H., Peng, K., Lu, Y.B., and Yu, L.G., (1983), An orthogonal anisotropic ductile damage model applicable to deep-drawing forming limits, Journal of Huazhong University of Science and Technology 11, 63 (in Chinese).
36. Lee, H., Wang, J., and Peng, K., (1985), Anisotropic damage criterion for deformation instability and its application to the forming limit of sheet metal, Journal of Huazhong University of Science and Technology, 13, 1 (in Chinese).
37. Lemaitre, J., (1983), A three-dimensional ductile damage model applied to deep-drawing forming limits, ICM4.
38. Loyd, D.J., and Sang, H., (1979), The influence of strain path on subsequent mechanical properties-orthogonal tensile paths, Metal. Trans. 10A, 1767.
39. Marciniak, Z., and Kuczynski, K., (1967), Limit strains in the processes of stretch-forming sheet metal, Int. J. Mech. Sci. 9, 609.
40. Marciniak, Z., Kuczynski, K., and Pokora, T., (1973), Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension, Int. J. Mech. Sci. 15, 789.
41. Needleman, A., and Triantafyllidis, N., (1978), Void growth and local necking in biaxially stretched sheets, J. Eng. Mater. Technol. (Trans. ASME, H), 100, 164.
42. Painter, M. J., and Pearce, R., (1974), Instability and fracture in sheet metal, J. Phys. D: Appl. Phys. 7, 992.
43. Ranta-Eskola, A., (1980), Proc. 11th IDDRG Congress, Metz, p. 453.
44. Schmitt, J. H., and Jalinier J. M., (1982), Damage in sheet metal forming-I. physical behavior; damage in sheet metal forming-II. plastic instability, Acta Metallurgica, 30, 1789.
45. Stören, S., and Rice, J. R., (1975), Localized necking in thin sheets, J. Mech. Phys. Solids, 23, 421.
46. Tadros, A.K., Mellor, P.B., (1975), Some comments on the limit strains in sheet metal stretching, Int. J. Mech. Sci. 17, 203.