ILIDS measurements of the evaporation of fuel droplets during the intake and compression strokes in a firing lean burn engine

SAE Technical Papers

Volumn , Issue , 1996, Pages

  Skippon, S M ^a   Tagaki, Y ^b  

^a Shell Research Ltd

^b NISSAN MOTOR CO   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

DROPS; EVAPORATION; FUEL SYSTEMS; GASOLINE; PARAFFINS; POLYOLS; SAPPHIRE; XYLENE;

COOLANT TEMPERATURE; DROPLET SIZE DISTRIBUTIONS; EXPERIMENTAL ARRANGEMENT; INTERFEROMETRIC LASER IMAGING; MIXTURE PREPARATIONS; SINGLE-CYLINDER RESEARCH ENGINES; SWIRL CONTROL VALVES; TRANSPARENT SAPPHIRES;

ENGINE CYLINDERS;

EID: 85072420258     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/960830     Document Type: Conference Paper

References (40)

1. Quader, A.A., The axially-stratified-charge engine SAE paper no. 820131, 1982.
2. Matsushita, S., Inoue, T., Nakanishi, K., Kato, K., and Kobayashi, N., Development of Toyota lean combustion system, SAE paper no. 850044, 1985.
3. Urushihara, T., Murayama, T., Takagi, Y., and Lee, Ki-Hyung,., Turbulence and cycle-by-cycle variation of mean velocity generated by swirl and tumble flow and their effects on combustion SAE paper no. 950813, 1995.
4. Hardalupas, Y., Taylor, A.M.K.P., Whitelaw, J.H., Ishii, K., Miyano, H., and Urata, Y., Influence of injection timing on in-cylinder fuel distribution in a Honda VTEC-E engine SAE paper no. 950507, 1995.
5. Berkmuller, M., Tait, N.P., Lockett, R.D., and Greenhalgh, D.A., In-cylinder crank angle resolved imaging of fuel concentration in a firing spark-ignition engine using planar LIFS in Proceedings of the 25th International Symposium on Combustion, Irvine, CA, 1994.
6. Yu Chulho, Kim Taehoon, Yi Yonggyun, Lee Juheon, Noh Seokhong, and Choi Kyuhoon, Development of KMC 2.4L lean burn engine SAE paper no. 950685, 1995.
7. Kiyota, Y., Akishino, K., and Ando, H., Concept of lean combustion by barrel-stratification SAE paper no. 920678, 1992.
8. Ohsuga, M., Yamaguchi, J., Kawabe, R., and Monomo, M., In-cylinder air fuel ratio and combustion control for spark ignition engines SAE paper no. 950076, 1995.
9. Nemecek, L.M., Wagner, R.M., and Drallmeier, J.A., Fuel droplet entrainment studies for minimization of cold-start wall-wetting SAE paper no. 950508, 1995.
10. Takeda, K., Yaegashi, T., Sekiguchi, K., Saito, K., and Imtake, N., Mixture preparation and HC emissions of a 4-valve engine with port fuel injection during cold starting and warm-up SAE paper no. 950074, 1995.
11. Saito, K., Sekiguchi, K., Imtake, N., Takeda, K., and Yaegashi, T., A new method to analyze fuel behaviour in a spark ignition engine SAE paper no. 950044, 1995.
12. Zhao, F-Q, Lai, M-C, and Harrington, D.L., The spray characteristics of automotive fuel injection-a critical review SAE paper no. 950506, 1995.
13. Naitoh, K., Takagi, Y., Kokita, H., and Kuwahara, K., Numerical prediction of fuel secondary atomization behaviour in SI engine based on the oval-parabola trajectories (OPT) model SAE paper no. 940526, 1994.
14. Tabata, M., Kataoka, M., Fujimoto, M., and Noh, Y., In-cylinder fuel distribution, flow field, and combustion characteristics of a mixture injected SI engine SAE paper no. 950104, 1995.
15. Glover, A.R., Skippon, S.M., and Boyle, R.D., Interferometric Laser Imaging for Droplet Sizing (ILIDS): A method for droplet size measurement in sparse spray systems, accepted for publication in Appl. Opt. 1995.
16. Skippon, S.M., Glover, A.R., Cooney, P.J., and Boyle, R.D., Studies of mixture preparation in a spark ignition engine using Interferometric Laser Imaging for Droplet Sizing (ILIDS), SAE paper no. 950457, 1995.
17. Meyer, J., Haug, M., Schreiber, M., and Unverzagt, S., Controlling combustion in a spark ignition engine by quantitative fuel distribution SAE paper no. 950107, 1995.
18. Johansson, B., Neij, H., Alden, M., and Juhlin, G., Investigations of the influence of mixture preparation on cyclic variations in an SI-engine, using Laser Induced Fluorescence SAE paper no. 950108, 1995.
19. Chen, K.C., DeWitte, K., and Cheng, W.K., A species-based multi-component volatility model for gasoline SAE paper no. 941877, 1994.
20. Law, C.K., Recent advances in droplet vaporisation and combustion Prog. Energy. Combust. Sci. 8, 171-201, 1982.
21. Serpenguzel, A., Chang, R.K., Acker, W.P., and Sung, R.L., Laser diagnostic techniques for characterizing droplet size, composition, and differential evaporation in fuel sprays SAE paper no. 925030, 1992.
22. Swindal, J.C., Dragonetti, D.P., Hahn, R.T., Furman, P.A., and Acker, W.P., In-cylinder charge homogeneity during cold start studied with fluorescent tracers simulating different fuel distillation temperatures SAE paper no. 950106, 1995.
23. Midgley, T., and McCarty, H.H., Radiation characteristics of the internal combustion engine SAE Trans. 14, 182-185, 1924.
24. Schipperijn, F.W., Nagasaka, R., Sawyer, R.F., and Green, R.M., Imaging of engine flow and combustion processes SAE paper no. 881631, 1988.
25. Takagi, Y., Ohno, T., and Asanuma, T., Temperature measurements of combustion gas in a spark ignition engine by infrared monochromatic pyrometry SAE paper no. 900483, 1990.
26. Bowditch, F.W., A new tool for combustion research: A quartz piston engine SAE Trans. 69, 17-23, 1961.
27. zur Loye, A.O., and Bracco, F.V., Two-dimensional visualization of premixed-charge structure in an IC engine SAE paper no 870454, 1987.
28. Le Coz, J-F., Henriot, S., and Pinchon, P., An experimental and computational analysis of the flow fields in a four valve spark ignition engine-focus on cycle resolved turbulence SAE paper no. 900056, 1990.
29. Marie, J-J., Desgroux, P., and Cottereau, M-J., CARS thermometry in a spark ignition engine Arch. Comb. 5, 391-398, 1985.
30. Bates, S.C., A transparent engine for flow and combustion visualization studies SAE paper no. 880520, 1988.
31. Bates, S.C., Flame imaging in a spark-ignition four stroke internal combustion optical engine SAE paper no. 890154, 1989.
32. Takemura, J., Sanbuyashi, D., and Ando, H., Effect of turbulence in intake port of MPI engine on fuel transport phenomena and non-uniformity of fuel/air mixing in cylinder SAE paper no. 900162, 1992.
33. Imperial College Optical Services Ltd., 190-192 Ravenscroft Road, Beckenham, Kent, BR3 4TW, England.
34. Displaytech Inc., 2200 Central Avenue, Boulder, CO 80301, USA. U.K. supplier: Optilas Ltd., Mill Court, Wolverton Mill, Milton Keynes, MK12 5RE.
35. Biodata Ltd., 10, Stocks Street, Manchester, M8 8QG England.
36. Lefebvre, A.H., Atomization and Sprays, Hemisphere, New York, 1989.
37. Shin., Y., Cheng, W.K., and Heywood, J.B., Liquid gasoline behaviour in the engine cylinder of a SI engine, SAE paper no. 941872, 1994.
38. Nogi, T., Ohyama, Y., and Yamaguchi, T., Effects of mixture formation of fuel injection systems in gasoline engine, SAE paper no. 891961, 1989.
39. Yang, J., Kaiser, E.W., Seigl, W.O., and Anderson, R.W., Effects of port-injection timing and fuel drolet size on total and speciated exhaust hydrocarbon emissions SAE paper no. 930711, 1993.
40. Alkidas, A.C., The effects of fuel preparation on hydrocarbon emissions of a S.I. engine operating under steady-state conditions SAE paper no. 941959, 1994.