Low emission diesel combustion system by use of reformulated fuel with liquefied CO2 and n-tridecane

SAE Technical Papers

Volumn , Issue , 1999, Pages

  Senda, Jiro ^a   Ikeda, Mamoru ^a   Yamamoto, Masaaki ^a   Kawaguchi, Bungo ^a   Fujimoto, Hajime ^a  

^a DOSHISHA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON DIOXIDE; COLOR PHOTOGRAPHY; COMBUSTION CHAMBERS; DIESEL ENGINES; DIESEL FUELS; EXHAUST SYSTEMS (ENGINE); SOOT;

COMBUSTION EXPERIMENTS; CONSTANT-VOLUME VESSEL; DIESEL COMBUSTION PROCESS; DIESEL COMBUSTION SYSTEM; EXPANSION MACHINES; FLAME CHARACTERISTICS; SHADOWGRAPH PHOTOGRAPHY; SIMULTANEOUS REDUCTION;

FUELS;

EID: 85072419703     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/1999-01-1136     Document Type: Conference Paper

References (54)

1. Shundoh, S., Kakegawa, T., Tsujimura, K., and Kobayashi, S., "The Effect of Injection Parameters and Swirl on Diesel Combustion with High Pressure Fuel Injection" SAE Paper 910489, 1991.
2. Pierpout, D. A., and Reitz, R. D., "Effect of Injection Pressure and Nozzle Geometry on D. I. Diesel Emissions and Performance" SAE Paper 950604, 1995.
3. Kobori, S., Kamimoto, T., and Kosaka, H., "Ignition, Combustion and Emissions in a DI Diesel Engine Equipped with a Micro-Hole Nozzle" SAE Paper 960321, 1996.
4. Iida, N., Nishimura, H., Kotsuji, T., Yoshida, Y., and Hosonuma, S., "Effect of High-Pressure Fuel Injection and a Micro-Hole Nozzle on Combustion in a Rapid Compression Machine" SAE Paper 970893, 1997.
5. X Using Pilot Injection" SAE Paper 950611, 1995.
6. Nakakita, K., Kondoh, T., Ohsawa, K., Takahashi, T., and Watanabe, S., "Optimization of Pilot Injection Pattern and Its Effect on Diesel Combustion with High-Pressure Injection" Transactions of the Japan Society of Mechanical Engineers, Series B, Vol. 59, No. 559, pp. 892-898, 1993, (in Japanese).
7. X Reduction from Diesel Combustion Using Pilot Injection with High Pressure Fuel Injection" SAE Paper 920461, 1992.
8. Ikegami, M., Nakatani, K., Tanaka, S., and Yamane, K., "Fuel Injection Rate Shaping and Its Effect on Exhaust Emissions in a Direct-Injection Diesel Engine Using a Spool Acceleration Type Injection System" SAE Paper 970347, 1997.
9. X Emissions by Using Multiple Injections in a Heavy Duty D. I. Diesel Engine" SAE Paper 940897, 1994.
10. X Using Multiple Injections and EGR in D. I. Diesel" SAE Paper 950217, 1995.
11. Suzuki, H., Koike, N., Ishii, H., and Odaka, M., "Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition Part 1: Experimental Investigation of Combustion and Exhaust Emission Behavior Under Pre-Mixed Homogeneous Charge Compression Ignition Method" SAE Paper 970313, 1997.
12. X Formation by Numerical Simulation with Experiment" SAE Paper 970315, 1997.
13. Yonetani, H., and Fukutani, I., "Dual Fuel Engine-Premixed Gasoline Homogeneous Charge Ignited by Injected Diesel Fuel-Exhaust Emission Characteristics in case of 4-Stroke Cycle DI Engine" Transactions of Society of Automotive Engineers of Japan, Vol. 25, No. 4, pp. 35-40, 1994, (in Japanese).
14. Hara, K., Yonetani, H., and Fukutani, I., "A Study of Gas (CNG) Engine-A Hybrid Combustion Engine-Premixed CNG Homogeneous Charge Ignited by Injected Diesel Fuel" Transactions of Society of Automotive Engineers of Japan, Vol. 25, No. 4, pp. 63-68, 1994, (in Japanese).
15. Kusaka, J., Daisho, Y., Kihara, R., Saito, T., and Nakayama, S., "Combustion and Exhaust Gas Emissions Characteristics of a Diesel Engine Dual-Fueled with Natural Gas" Proc. COMODIA 98, (Kyoto), pp. 555-560, 1998.
16. Takeda, Y., Nakagome, K., and Niimura, K., "Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection" SAE Paper 961163, 1996.
17. Harada, A., Shimazaki, N., Sasaki, S., Miyamoto, T., Akagawa, H., and Tsujimura, K., "The Effects of Mixture Formation on Premixed Lean Diesel Combustion" SAE Paper 980533, 1998.
18. X and Soot in Diesel Engines under a New Combustion System (Uniform Bulky Combustion System-UNIBUS)" 17th International Vienna Motor Symposium, (Vienna), pp. 303-314, 1996.
19. Hashizume, T., Akagawa, H., and Tsujimura, K., "Emission Reduction Using Multiple Stage Diesel Combustion" Proc. the 14th Internal Combustion Engine Symposium, Japan, (Nagoya), pp. 259-264, 1997, (in Japanese).
20. Yokota, H., Kudo, Y., Nakajima, H., Kakegawa, T., and Suzuki, T., "A New Concept for Low Emission Diesel Combustion" SAE Paper 970891, 1997.
21. Kimura, S., Matsui, Y., and Koike, M., "A Low Temperature Pre-mixed Combustion Concept for DI Diesel Engines" Nissan Technical Review, No. 41, pp. 69-74, 1997, (in Japanese).
22. Furutani, M., Ohta, Y., Kono, M., and Hasegawa, M., "An Ultra-Lean Premixed Compression-Ignition Engine Concept and its Characteristics" Proc. COMODIA 98, (Kyoto), pp. 173-177, 1998.
23. Tsurutani, K., Takei, Y., Fujimoto, Y., Matsudaira, J., and Kumamoto, M., "The Effects of Fuel Properties and Oxygenates on Diesel Exhaust Emissions" SAE Paper 952349, 1995.
24. Bertoli, C., Giacomo, N. D., and Beatrice, C., "Diesel Combustion Improvements by the Use of Oxygenated Synthetic Fuels" SAE Paper 972972, 1997.
25. X High Thermal Efficiency, and Low Noise Diesel Combustion with Oxygenated Agents as Main Fuel" SAE Paper 980506, 1998.
26. Fleisch, T., McCarthy, C., Basu, A., Udovich, C., Charbonneau, P., Slodowske, W., Mikkelsen, S. E., and McCandless, J., "A New Clean Diesel Technology: Demonstration of ULEV Emissions on a Navistar Diesel Engine Fueled with Dimethyl Ether" SAE Paper 950061, 1995.
27. Kapus, P., and Ofner, H., "Development of Fuel Injection Equipment and Combustion System for DI Diesels Operated on Dimethyl Ether" SAE Paper 950062, 1995.
28. Kajitani, S., Chen, Z. L., Konno, M., and Rhee, K. T., "Engine Performance and Exhaust Characteristics of Direct-Injection Diesel Engine Operated with DME" SAE Paper 972973, 1997.
29. Sorenson, S. C., and Mikkelsen, S. E., "Performance and Emissions of a 0.273 Litter Direct Injection Diesel Engine Fueled with Neat Dimethyl Ether" SAE Paper 950064, 1995.
30. Ofner, H., Gill, D. W., and Krotscheck, C., "Dimethyl Ether as Fuel for CI Engines-A New Technology and its Environmental Potential" SAE Paper 981158, 1998.
31. Sheng, H. Z., Chen, L., and Wu, C. K., "The Droplet Group Micro-Explosions in W/O Diesel Fuel Emulsion Sprays" SAE Paper 950855, 1995.
32. Kadota, T., Yamasaki, H., Segawa, D., Kawatsu, T., and Tsue, M., "Instantaneous Two Dimensional Visualization of Soot Concentration Profiles in the Diesel Spray Flame" Proc. COMODIA 98, (Kyoto), pp. 105-110, 1998.
33. Kohketsu, S., Mori, K., Sakai, K., and Nakagawa, H., "Reduction of Exhaust Emission with New Water Injection System in Diesel Engine" SAE Paper 960033, 1996.
34. X and PM Reduction Technology" SAE Paper 972962, 1997.
35. Fujimoto, H., Senda, J., Shibata, I., and Matsui, K., "New Concept on Lower Exhaust Emission of Diesel Engine" SAE Paper 952062, 1995.
36. 2 Mixed Fuel Combustion System for Reduction of NO and Soot Emission of Diesel Engine" SAE Paper 970319, 1997.
37. 2 Dissolved Diesel Fuel" Proc. the 7th International Conference on Liquid Atomization and Spray Systems, (Seoul), Vol. I, pp. 141-148, 1997.
38. 2 Mixed Fuel for NO and Soot Simultaneous Reduction" Proc. COMODIA 98, (Kyoto), pp. 117-122, 1998.
39. Senda, J., Yamaguchi, M., Wakashiro, T., Tsukamoto, T., Hojyo, K., and Fujimoto, H., "Spray Characteristics of Pintle Type Injector under Low-Pressure Field" Proc. the 5th International Conference on Liquid Atomization and Spray Systems, (Gaithersburg), pp. 857-864, 1991. (Pubitemid 23590455)
40. Senda, J., Nishikiori, T., Tsukamoto, T., and Fujimoto, H., "Atomization of Spray under Low-Pressure Field from Pintle Type Gasoline Injector" SAE Paper 920382, 1992.
41. Senda, J., Hojyo, Y., and Fujimoto, H., "Modeling of Atomization Process in Flash Boiling Spray" SAE Paper 941925, 1994.
42. Senda, J., Yamaguchi, M., Tsukamoto, T., and Fujimoto, H., "Characteristics of Spray Injection form Gasoline Injector" JSME International Journal, Series B, Vol. 37, No. 4, pp. 931-936, 1994. (Pubitemid 290416)
43. Adachi, M., McDonell, V. G., Tanaka, D., Senda, J., and Fujimoto, H., "Characterization of Fuel Vapor Concentration Inside a Flash Boiling Spray" SAE Paper 970871, 1997.
44. Solomon, A. S. P., Chen, L. D., and Faeth, G. M., "Investigation of Spray Characteristics of Fuels Containing Dissolved Air and Superheated Fuel" NASA Contractor Report 3563, 1982.
45. Huang, Z., Shao, Y., and Shiga, S., "Atomization Behavior of Fuel Containing Dissolved Gas" Atomization and Sprays, Vol. 4, No. 3, pp. 253-262, 1994.
46. Murrell, J. N., and Bouchen, E. A., (translated by Nakanishi, K., et al.,), Properties of Liquids and Solutions, Wiley Japan, Tokyo, pp. 150-155, 1984, (in Japanese).
47. Shinoda, K., Principles of Solution and Solubility, 3rd Ed., Maruzen, Tokyo, pp. 73-102, 1991, (in Japanese).
48. Chueh, P. L., and Prausnitz, J. M., "Vapor-liquid Equilibria at High Pressure: Calculation of Critical Temperature, Volume, and Pressure of Nonpolar Mixture" AIChE Journal, Vol. 13, No. 6, pp. 1107-1113, 1967.
49. Kreglewski, A., and Kay, W. B., "The Critical Constants of Conformal Mixtures" The Journal of Physical Chemistry, Vol. 73, No. 10, pp. 3359-3366, 1969.
50. Nishiumi, H., and Saito, S., "An Improved Generalized BWR Equation of State Applicable to Low Reduced Temperatures" Journal of Chemical Engineering of Japan, Vol. 8, No. 5, pp. 356-360, 1975.
51. X and Particulate" Proc. COMODIA 90, (Kyoto), pp. 625-632, 1990.
52. Iida, N., "Surrounding Gas Condition Effects on Soot Formation and Extinction-Observation of Diesel Spray Combustion Using a Rapid Compression Machine" SAE Paper 930603, 1993.
53. Machacon, H. T. C., Shiga, S., Karasawa, T., and Nakamura, H., "The Effect of EGR on Diesel Particulate Emissions" Proc. COMODIA 94, (Yokohama), pp. 287-292, 1994.
54. Gaydon, A. G., and Wolfhard, H. G., Flames-Their structure, radiation and temperature, Chapman and Hall, London, pp. 193-195, 1953.