Technologies for recycling shredder residue

SAE Technical Papers

Volumn , Issue , 2007, Pages

  Jody, B J ^a   Daniels, E J ^a  

^a ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL PLANTS; DOMESTIC APPLIANCES; EDDY CURRENT TESTING; ELASTOMERS; METALS; PLASTIC RECYCLING; SCRAP METAL; SCRAP METAL REPROCESSING;

AMERICAN PLASTICS COUNCILS; ARGONNE NATIONAL LABORATORY; DISPOSAL COSTS; EDDY-CURRENT SEPARATOR; RECOVERING METALS; SHREDDER RESIDUES; THERMO-CHEMICAL;

AUTOMOBILES;

EID: 85072416972     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2007-01-0526     Document Type: Conference Paper

References (83)

1. Goldmann, D., "Automotive Recycling in the Context of Legal, Technical and Sustainable Development," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2002.
2. Levizzari, A., Bonino F., and Corrias S., "Directive on End of Life Vehicles and Its Impact on the Automotive Italian Market: Problems and Opportunities," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2002.
3. Schäper, I.S., "A Vehicle Producer's Remarks Regarding National Implementations of EU ELV Directive," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2002.
4. Essenpreis, M., "Technical Standards for ELV Recycling," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2002.
5. Elert, E., editor, "Number of Cars," The Physics Handbook, http://hypertextbook.com/facts/2001/MarinaStasenko.shtml, 2001.
6. Sendijarevic, V., et al., "Recent Developments in Shredder Downstream Separation Processes and Recycling Options for Automotive Shredder Residue," SAE Paper 970663, 1997.
7. American Plastics Council, Automotive Learning Center, 2006. http://www.drivinginnovation.com/glossary/faq.html.
8. ARIC, "Recycling of Major Appliances," Information Bulletin #1, Appliance Recycling Information Center (ARIC), 1111 19th St. NW, Suite 402, Washington, D.C. (data provided by the Association of Home Appliance Manufacturers, Chicago, IL), 1995.
9. American Plastics Council publication, based on "Composition, Properties and Economic Study of Recycled Refrigerators," a report prepared for the American Plastics Council (APC) by, Zolotor A.M., 2005. (http://www.apcnewsmedia.com/site/tertiary.asp?TRACKID=&VID=2&CID= 392&DID=1793&PSID=APC)
10. Hubble, W.S., Most I.G., and Wolman M.R., "Investigation of the Energy Value of Automobile Shredder Residue," U.S. Department of Energy Report DOE/ID-12551, Washington, D.C., 1987.
11. Dean, K.D., et al., "Bureau of Mines Research on Recycling Scrapped Automobiles," U.S. Department of Interior Bulletin 684, Washington, D.C., 1985.
12. Bilbrey, J.H., Jr., Sterner J.H., and Valdez E.G., "Resource Recovery from Automobile Shredder Residue," Conservation and Recycling Journal 2 (3-4): 219-232, 1978.
13. Ellsworth, R.D., Ballinger E.P., and Engdahl R.B., "Preliminary Survey of Development of An Incinerator for Removal of Combustibles from Scrapped Automobile Bodies," Final Report Prepared for Institute of Scrap Iron and Steel, Battelle Memorial Institute, Colombus, OH, Aug. 30, 1957.
14. Bilbrey, J.H., Dean K.C., and Sterner J.W., "Design and Operation of an Automobile and Railroad Car Incinerator," Reprint A 74-88, Metal Soc. American Institute of Mechanical Engineers, 1974.
15. Woodruff, K.L., Mechel B.D., and Albertson D.M., "Development of a Fluidized Bed Combustion System for Auto Shredder Residue," Appendix C in Center for Metals Production, CMP Report No. 90-1, Carnegie Melon Research institute Pittsburgh, PA, Jan. 1990.
16. Mark, F.E., and Fisher M.M., "Energy Recovery from Automobile Shredder Residue through Co-Combustion with Municipal Solid Waste," Vol. II, pp. 46-53, in Proceedings of R'1999 Recovery Recycling Re-Integration, Geneva Switzerland, Barrage A., and Edelmann X., (editors), Feb. 1999.
17. Saxena, S.C., et al., "Combustion and Co-Combustion of Auto Fluff," Energy 20: 877-887, 1995.
18. Pomykala, J.A., Jr., et al., "Separation and Recovery of Materials from Shredder Residue," to be published.
19. Winslow, G.R., et al., "Advanced Separation of Plastics from Shredder Residue, SAE Paper 2004-01-0469, 2004.
20. McLemore, M.D., "Launcher for Compressible Materials and Associated Process," U.S. Patent #7,073,669, July 2006.
21. Competitive Analysis Centre, Inc., and Economic Associates Inc., "Automotive Shredder Residue, Review of ASR-Blast Furnace Concept with European Interests," prepared by Competitive Analysis Centre, Inc., and Economic Associates Inc., for the American Plastics Council (APC) and the Environment and Plastics Industry Council (EPIC) of CPIA, March 1998.
22. Volkswagen-Sicon process for recycling end-of-life vehicles launched in Austria. Volkswagen Media Services, June 20, 2005.
23. VW Press Release, June 2004, "ARN Plan for Separation Plant in Netherlands Will Significantly Reduce Shredder Waste from Discarded Cars" and "Smart Waste Separation with VW SiCon Process," Recycling News, Oct. 2005.
24. Shut, J.H., "Close-Up on Recycling, How to Turn auto Shredder Residue Into 60 Million Lb of Plastic Pellets," Plastics Technology, Oct. 2004.
25. Toyota http://www.toyota.co.jp/en/termsofuse/
26. Sattler, H.P., and Laage B., "ASR-From Waste to Products," in Proceedings of R'2000 Recovery, Recycling, Re-Integration, Toronto, Canada, June 2000.
27. Zevenhoven, R., and Saeed L., "Automotive Shredder Residue (ASR) and Compact Disc (CD) Waste: Options for Recovery of Materials and Energy," Final Report #TKK-ENY-14, Helsinki University of Technology, April 2003.
28. Banks, M.E., Lusk W.O., and Ottinger R.S., "New Chemical Concepts for Utilization of Waste Plastics," U.S. Environmental Protection Agency Report SW-IGC, Washington, D.C., 1971.
29. Leidner, J., Plastics Waste; Recovery of Economic Value, Marcel Dekker, Inc., New York, 1981.
30. Keller, C., "The Swiss Way of Handling Plastics in Cars, Objectives, Concepts and Recent Developments," in Proceedings of Identiplast Congress, APME Publications, April 26-28, 1999.
31. Day, M., Cooney J.D., and Shen Z., "Pyrolysis of Automobile Shredder Residue: An Analysis of the Products of a Commercial Screw Kiln Process," J. Anal. Appl. Pyrol. 37: 49-67, 1996.
32. Roy, C., and Chaala A., "Vacuum Pyrolysis of Automotive Shredder Residue," Resour. Conserv. Recycl. 32: 1-27, 2001.
33. Chaala, A., Ciochina O., and Roy C., "Vacuum Pyrolysis of Automotive Shredder Residue, Use of the Pyrolytic Oil as a Modifier for Road Bitumin," Resour. Conserv. Recycl. 26: 155-172, 1999.
34. http://www.sppe.ch/kurzfassungen/pdf/wastep2/klammer643.pdf
35. Keller, C., "The Swiss Way of Handling Plastics in Cars, Objectives, Concepts and Recent Developments," in Proceedings of Identiplast Congress, APME Publications, April 26-28, 1999.
36. Keller, C., "Thermal Treatment of Auto Shredder Residue (ASR) Under Reducing Conditions, Experiences on Technical and Laboratory Scale," Vol. II, pp. 187-192 in Proceedings of R'99 Recovery Recycling Re-integration, Barrage A., and Edelmann X., (editors), Geneva, Switzerland, Feb. 1999. See also www.environmental-expert.com/events/r2000/r2000.htm
37. Pasel, C., and Wanzl W., "Experimental Investigations on Reactor Scale-Up and Optimization of Product Quality in Pyrolysis of Shredder Waste," Fuel Proc. Technol. 80: 47-67, 2003.
38. Kondoh, M., et al., "Study of Gasification Characteristics of Automobile Shredder Residue," JSAE Review 22: 234-236, 2001.
39. Appendix E of, Schmitt, R.J., "Automobile Shredder Residue: The Problem and Potential Solutions," Center for Metals Production, CMP Report No. 90-1, Carnegie Mellon Research Institute, Pittsburgh, PA, Jan., 1990.
40. Selinger, A., Steiner C., and Shin K., "TwinRec-Bridging the Gap of Car Recycling in Europe," presented at International Automotive Recycling Congress, March 12-14, Geneva, CH.
41. Ando, G., et al., 2002, "Automobile Shredder Residue Treatment in Japan-Experience of 95′000 t ASR Recycling and Recovery available for Europe through TwinRec," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2003.
42. Obermeier, T., and Markowski J., "Gasification of Shredder Residue at SVZ Schwarze Pumpe," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2002.
43. Identiplast, APME report 8037, International Conference on Identification, Sorting, and Separation of Plastics, Brussels, Belgium, 2001.
44. Obermeier, T., "Gasification of Shredder Residue Back to Feedstock," presented at Identiplast, International Conference on Identification, Sorting, and Separation of Plastics Brussels, Belgium, 2001.
45. Leal-Quiros, E., "Plasma Processing of Municipal Solid Waste," Brazilian Journal of Physics 34 (4B), Dec. 2004.
46. Lundqvist, U., et al., "Design for Recycling in the Transport Sector-Future Scenarios and Challenges," Department of Physical Resource Theory, Chalmers University of Technology, Goteborg University, Goteborg, Sweden, 2004.
47. http://www.ctu.ch/modules.php?name=reshment
48. Sauert, F., et al., "RESHMENT-An ASR Process for Maximized Recycling, Reuse and Recovery," SAE Paper 2001-01-3757, 2001.
49. Swiss Auto Recycling Foundation-Annual Report 2001, April 2002.
50. Swiss Auto Recycling Foundation-Annual Report 2002, April 29, 2003.
51. Horii, M., and Iida S., "Gasification and Dry Distillation of Automobile Shredder Residue (ASR)," JSAE 22: 63-68, 2001.
52. Kusakam, K., and Iida S., "Sorting, Compaction and Solidification Technology for Automobile Shredder Residue (ASR)," JSAE Review 21: 549-554, 2000.
53. Drost, U., et al., "Report on the Operating Trial with Automobile Shredder Residue (ASR)," available at http://www.assurre.org/downloads/ archive/20a90150-ea41-4121-8e22-e283829abe48.pdf
54. Stahlberg, R., et al., "The THERMOSELECT High Temperature Recycling Technology for Automotive Shredder Residue-Results and Perspectives," in Proceedings of the International Automobile Recycling Congress, Geneva, Switzerland, March 13-15, 2002. Also http://www.thermoselect.com/news/2003-10- 12,%20Gasification%20Technologies %20Council%20%20-%20USA.pdf
55. Changing World Technologies (CWT), "The Vehicle Recycling Partnership (VRP) Shredder Residue Project," Changing World Technologies, Inc., West Hempstead, NY, June 2004.
56. Braslaw, J., and Gerlock J.L., "Polyurethane Waste Recycling 2, Polyol Recovery and Purification," Industrial and Engineering Chemistry 23: 552, 1984.
57. Mahoney, L.R., Weiner S.A., and Farris F.C., "Hydrolysis of Polyurethane Foam Waste," Environmental Science and Technology 8 (2), 1974.
58. Valdez, E.G., Dean K.C., and Bilbrey J.H., "Recovering Polyurethane Foam and Other Plastics from Auto Shredder Reject," U.S. Bureau of Mines, Report of Investigations 8091, Washington, D.C, 1975.
59. Mahoney, L.R., Weiner S.A., and Farris F.C., "Hydrolysis of Polyurethane Foam Waste," Environmental Science and Technology 8 (2), 1974.
60. Kresta, J.E., et al., "Recycling Process for Cross Member Composite Parts," SAE Paper 1999-01-0665, 1999.
61. Sendijarevic, V., et al., "Screening Study to Evaluate Shredder Residue Materials," SAE Paper 2004-01-0468, 2004.
62. Sendijarevic, V., et al., "Chemical Recycling of Mixed Polyurethane Foam Recovered from Shredder Residue into Polyurethane Polyols," SAE Paper 2005-01-0850, 2005.
63. Schut, J.H., "New Ways to Salvage Plastic Waste," PlasticsTechnology, 2001, available at http://www.plasticstechnology.com/ articles/200108fa2.html
64. DuBois, J.H., and John F.W., Plastics, 5th ed., Van Nostrand Reinhold Company, N.Y., 1967.
65. Plastics Institute of America (PIA), Maximizing the Life Cycle of Plastics, Final Report, Plastics Institute of America, Inc., Lowell, Mass., Feb., 1980.
66. Tesoro, G., "Recycling of Synthetic Polymers for Energy Conservation-The State of the Art," Polymer News 12, 1987.
67. Lynch, J.C., and Nauman E.B., "Separation of Commingled Plastics by Selective Dissolution," Proc. Society of Plastics Engineers (SPE), Regional Technical Conference (RETEC), Charlotte, N.C., Oct. 30, 1989.
68. Nauman, B.E., and Lyncy J.C., "Polymer Recycling by Selective Dissolution," U.S. patent Number 5,198,471, March 1993.
69. Nauman, B.E., and Lyncy J.C., "Polymer Recycling by Selective Dissolution," U.S. patent Number 5,278,282, January 1994.
70. Jody, B.J., et al., "Recycling of Plastics in Automobile Shredder Residue," Proc. of the 25th Intersociety Energy Conversion Engineering Conference, Vol. 5, Reno, Nev., Aug. 1990.
71. Daniels, E.J., Jody B.J., and Bonsignore P.V., "Automotive Shredder Residue: Process Development for Recovery of Recyclable Constituents," Presented at and published in the proceedings of the 6th International Conference on Solid Waste Management and Secondary Materials, Dec., 1990.
72. Jody, B.J., Daniels E.J., and Bonsignore P.V., "Process to Recycle Shredder Residue," U.S. patent 6,329,436, Dec. 2001.
73. Bonsignore, P.V., Jody B.J., and Daniels E.J., "Separation Techniques for Auto Shredder Residue," SAE Technical Paper Series No. 910854, pp. 59-63, 1991.
74. th American Chemical Society National Meeting, Aug. 22-27, Chicago, IL, 1993.
75. Jody, B.J., et al., "Recovering Recyclable Materials from Shredder Residue," in Proc. 1994 Minerals, Metals, and Materials Conference, Extraction and Processing Division, San Francisco, CA, Feb. 17-March 3, 1994.
76. Jody, B.J., et al., "Recovering Recyclable Materials from Shredder Residue," Journal of Metals 46 (2): 40-43, Feb. 1994.
77. Jody, B.J., Daniels E.J., and Brockmeier N.F., "Recovering Plastics from Cars," ChemTech 24 (11): 41-44, Nov. 1994.
78. Daniels, E.J., "Separation and Recovery Process R&D to Enhance Automotive Materials Recycling," in Proc. 3rd International Conference on Automobile Recycling, Auto Recycle Europe '94, Milano, Italy, May 5-6, 1994.
79. Jody, B.J., Daniels E.J., and Teotia A.P.S., "Progress in Recycling of Automobile Shredder Residue," Chapter 5 in Conversion and Utilization of Waste Materials, Khan M. Rashid, (editor), Taylor and Francis, Washington, D.C., May 1996.
80. Jody, B.J., Daniels E.J., and Pomykala, J.A. Jr., "Progress in Recycling of Automobile Shredder Residue," Proc. Extraction and Processing Division, TMS Annual Meeting, Anaheim, CA, Feb. 1996.
81. Jody, et al., "Method for the Separation of High Impact Polystyrene (HIPS) and Acrylonitrile Butadiene Styrene (ABS) Plastics," U.S. Patent Number 5653867, Aug. 1997.
82. Jody, B.J., Pomykala J.A., and Daniels E.J., "Process for the Recovery and Separation of Plastics," U.S. Patent 6,599,950, July 2003.
83. Shut, J.H., "Close-Up on Recycling, How to Turn Auto Shredder Residue Into 60 Million Lb of Plastic Pellets," Plastics Technology, Oct. 2004.