Simulation of warm forming assisted hemming to study the effect of process parameters on product quality

SAE Technical Papers

Volumn , Issue , 2007, Pages

  Espinosa, Ricardo H ^a   Das, Shuvra ^b   Weaver, Jonathan ^b  

^a FORD MOTOR COMPANY   (United States)

^b UNIVERSITY OF DETROIT MERCY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; AUTOMOBILE MANUFACTURE; AUTOMOTIVE INDUSTRY; BENDING (FORMING); CUSTOMER SATISFACTION; FITS AND TOLERANCES; MECHANICAL PROPERTIES; SHEET METAL;

DIMENSIONAL QUALITY; DIMENSIONAL SPECIFICATIONS; DIMENSIONAL TOLERANCE; GOVERNMENT STANDARDS; LIGHTWEIGHT MATERIALS; PROCESS TECHNOLOGIES; SATISFACTORY SOLUTIONS; TRADITIONAL MANUFACTURING;

FINITE ELEMENT METHOD;

EID: 85072411336     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2007-01-0420     Document Type: Conference Paper

References (42)

1. Dutton, T., Pask, E., (1998), Simulation of surface defects in sheet metal panels, Simulation of Materials Processing: Theory, Methods and Applications, Huetink, & Baaijens, (eds), Balkema, Rotterdam, pages 869-874.
2. Miller, W., et al, (2000), Recent development in aluminum alloys for the automotive industry, Material science and technology, A280 pages 37-49.
3. Mangonon, P., (1999), The principles of materials selection for engineering design, Prentice Hall.
4. Umehara, Y., (1990), Technologies for the more precise press-forming of automobile parts, Journal of Materials Processing Technology 22 pages 239-256.
5. Eagle, B., (1994), An evaluation of the relationships of automobile door distortions to variations in material properties and production operating parameters, MS Thesis MIT Sloan School of Management, Cambridge, MA.
6. Friedman, P., (2001), Craftmanship in hemming of aluminum closure panels, Presented at 2001 Windsor workshop, Windsor, Ontario, June 5, 2001.
7. Katgerman, L., Eskin, D., (2003), Hardening, annealing and aging, Handbook of aluminum, CRC.
8. Bolt, P., et al, (2001), Feasibility of warm forming of aluminum products, Journal of Materials Processing Technology 115 pages 118-121.
9. Li, D., Ghosh, A., (2003), Tensile deformation behavior of aluminum alloys at warm forming temperatures, Materials Science and Engineering, A352 pages 279-286.
10. Li, D., Ghosh, A., (2004), Biaxial warm forming behavior of aluminum sheet alloys, Journal of Materials Processing Technology, 145 pages 281-293.
11. Livatyali, H., Larris, S., (2004), Experimental investigation on forming defects in flat surface-convex edge hemming: roll, recoil and warp, Journal of Materials Processing Technology, Vol. 153-154, pages 913-919.
12. Livatyali, H., et al, (2004), Experimental investigation of forming defects in flat surface-convex edge hemming, Journal of Materials Processing Technology, Vol. 146, no. 1, pp. 20-27. 15 Feb. 2004.
13. Livatyali, H., et al, (2003), Computer aided die design of straight flanging using approximate numerical analysis, Journal of Materials Processing Technology, 142 pages 532-543.
14. Livatyali, H., et al, (2002), Prediction and elimination of springback in straight flanging using computer-aided design methods. Part 2: FEM predictions and tool design, Journal of Materials Processing Technology, 120, pages 348-354.
15. Livatyali, H., et al, (2001), Prediction and elimination of springback in straight flanging using computer-aided design methods. Part 1: Experimental investigations, Journal of Materials Processing Technology, 117, pages 262-268.
16. Livatyali, H., et al, (2000), Improvement of hem quality by optimizing flanging and pre-hemming operations using computer-aided die design, Journal of Materials Processing Technology, 98, pages 41-52.
17. Muderrisoglu, A., et al, (1996), Bending, flanging, and hemming of aluminum sheet-an experimental study, Journal of Materials Processing Technology, 59, pages 10-17.
18. Wang, Ch, et al, (1993), Mathematical modeling of plane-strain bending of sheet and plate, Journal of Materials Processing Technology, 39, pages 279-304.
19. Zhang, G., Wu, X., Hu, S., (2001), A study on fundamental mechanisms of warp and recoil in hemming, ASME Journal of Engineering Materials and Technology, October 2001, Vol. 123.
20. Svensson, M., Mattiasson, K., (2002), The influence on the roll-in hemming. A comparison between FE-simulations and practical tests.NUMISHEET-02.
21. Svensson, M., Mattiasson, K., (2002), Three-dimensional simulation of hemming with the explicit FE-method, Journal of Materials Processing Technology, 128, pages 142-154.
22. Svensson, M., (2002), Hemming simulation, Simulation of materials processing: theory, methods and applications, Huetink, & Baaijens, (eds), Balkema, Rotterdam.
23. Atzema, E., Baartman, R., Klomp, A., (1998), Finite element simulations of the hemming process, Simulation of materials processing: theory, methods and applications, Huetink, & Baaijens, (eds), Balkema, Rotterdam.
24. Debuire, F., Zwilling, V., (2002), Experimental and numerical approaches of hemming: application on steel and aluminum 6016, SAE paper 2002-01-2084.
25. Iwata, N., et al, (1995), Improvements in finite-element simulation for stamping and applications to the forming of laser-welded blanks, Journal of Materials Processing Technology, 50, pages 335-347.
26. Altan, T., et al, (2002), Warm forming of aluminum alloys, thefabricator.com, article published on January 31, 2002.
27. Krajewski, P., (2005), The warm ductility of commercial aluminum sheet alloys, SAE paper 2005-01-1388.
28. Morris, L., George, R., (1977), Warm forming high-strength aluminum automotive parts, SAE paper 770206.
29. Cavaliere, P., (2002), Hot and warm forming of 2618 aluminum alloy, Journal of light metals, 2 pages 247-252.
30. Naka, T., et al, (2001), The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum-magnesium alloy sheet, Journal of Materials Processing Technology, 113 pages 648-653.
31. Naka, T., et al, (2003), Effects of temperature on yield locus for 5083 aluminum alloy sheet, Journal of Materials Processing Technology, 140 pages 494-499.
32. Moon, Y., et al, (2003), Effect of tool temperature on the reduction of the springback of aluminum sheets, Journal of Materials Processing Technology, 132, pages 365-368.
33. Moon, Y., et al, (2003), Tool temperature control to increase the deep drawability of aluminum 1050 sheet, International Journal of Machine Tools and Manufacture, 41, pages 1283-1294.
34. Schuocker, D., (2001), Mathematical modeling of laser-assisted deep drawing, Journal of Materials Processing Technology 115, pages 104-107.
35. Van den boogaard, A., Bolt, P., Werkhoven, R., (2003), Modelling of AlMg sheet forming at elevated temperatures, Material forming processes, Habraken Anne Marie, (eds), ISTE Publishing Company.
36. Takuda, H., et al, (2002), Finite element simulation of warm deep drawing of aluminum alloy sheet when accounting for heat conduction, Journal of Materials Processing Technology, 120 pages 412-418.
37. Lahaye, Ch, et al, (1999), Improved AA5182 aluminum alloy as preferred choice for critical forming operations, SAE paper 1999-01-3173.
38. Lahaye, Ch, et al, (2000), Aluminum alloy selection for closures with respect to functional demands, SAE paper 2000-01-2696.
39. Daniel, D., et al, (1999), Development of 6XXX alloy aluminum sheet for autobody outer panels: bake hardening, formability and trimming performance, SAE paper 1999-01-3195.
40. Chen, Z., et al, (2004), Numerical and experimental investigation of 5XXX aluminum alloy stretch flange forming, SAE paper 2004-01-1051.
41. Krajewski, P., et al, (1999), Method for improving the hemmability of age-hardenable aluminum sheet, U.S. Patent 5,948,185.
42. Abaqus User's Manual Version 6.3.