The finite element method for mechanics of solids with ANSYS applications

The Finite Element Method for Mechanics of Solids with ANSYS Applications

Volumn , Issue , 2011, Pages 1-482

  Dill, Ellis H ^a  

^a RUTGERS UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85059714265     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (98)

1. Courant, R., Variational methods for the solution of problems of equilibrium and vibration, Bull. Am. Math. Soc., 49, 1-43, 1943.
2. Strang, G., and G. J. Fix, An Analysis of the Finite Element Method, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1973.
3. Oden, J. T., and J. N. Reddy, An introduction to the Mathematical Theory of Finite Elements, John Wiley, New York, 1976.
4. Oden, J. T., and G. F. Carey, Finite Elements: Mathematical Aspects, Prentice-Hall, Englewood Cliffs, NJ, 1983.
5. Brenner, S. C., and L. R. Scott, The Mathematical Theory of Finite Element Methods, Springer, New York, 3rd ed. 2008.
6. Atluri, S. A., The Meshless Method (MLPG) for Domain & BIE Discretizations, Tech Science Press, Forsyth, GA, 2004.
7. Argyris, J., and S. Kelsey, Energy Theorems and Structural Analysis, Butterworth Scientific Publications, London, 1960.
8. Turner, M. J., R. Clough, H. Martin, and L. Topp, Stiffness and Deflection Analysis of Complex Structures, J. Aero. Sci., 23, no. 9, Sept., 1956, pp. 805-823.
9. Clough, R., The finite element in plane stress, Proc. 2nd ASCE Conf. on Electronic Computation, Pittsburgh, PA, Sept. 1960.
10. Cook, R. D., Concepts and Applications of Finite Element Analysis, John Wiley, New York, 1974.
11. Gallagher, R. H., Finite Element Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1975.
12. Martin, H. C., Introduction to Matrix Methods of Structural Analysis, McGraw-Hill, New York, 1966.
13. Przemieniecki, J. S., Theory of Matrix Structural Analysis, McGraw-Hill, New York, 1968.
14. Zienkiewicz, O. C., The Finite Element Method in Structural and Continuum Mechanics, McGraw-Hill, London, 1967.
15. Sololnikoff, I. S., Mathematical Theory of Elasticity, McGraw-Hill, New York, 1956, 67.
16. Williams, M. L., Stress singularities resulting from various boundary conditions in angular corners of plates in extension, J. Appl. Mech. 19, 526, 1952.
17. Dill, E. H., Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity, CRC Press, Boca Raton, FL, 2007.
18. Malvern, L. E., Introduction to the Mechanics of Continuous Media, Prentice-Hall, Englewood Cliffs, NJ, 1969.
19. Sololnikoff, I. S., Mathematical Theory of Elasticity, McGraw-Hill, New York, 1956.
20. Timoshenko, S., and J. N. Goodier, Theory of Elasticity, McGraw-Hill, New York, 1951.
21. Washizu, K., Variational methods in elasticity and plasticity, 2nd ed., Pergamon Press, New York, 1974.
22. Bathe, K. J., Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ, 1996.
23. Brenner, S. C., and L. Ridgway Scott, The Mathematical Theory of Finite Element Methods, Springer, New York, 2008.
24. Brezzi, F., and M. Fortin, Mixed and Hybrid Finite Element Methods, Springer-Verlag, New York, 1991.
25. Hughes, T. J. R., The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Dover Publications, Mineola, NY, 2000.
26. Pian, T. H. H., and P. Tong, Basis of finite element methods for solid continua, Int. J. Numer. Meth. Eng., 1, 3-28, 1969.
27. Pian, T. H. H., and P. Tong, Mixed and hybrid finite-element methods, In Finite Element Handbook, Part 2, Chapter 5, H. Kardestuncer and D. H. Norrie, eds., McGraw-Hill, New York, 1987.
28. Wunderlich, W., Ein verallgemeinertes Variationsverfahren zur volen oder teilweisen Diskretisierung mehrdimensionaler Elastizitätsprobleme, Ingenieur-Archiv, 9, 230-247, 1970.
29. Zienkiewicz, O. C., R. L. Taylor, and J. Z. Zhu, The Finite Element Method: Its Basis and Fundamentals, 6th ed., Elsevier Butterworth-Heinemann, Burlington, MA, 2005.
30. Zienkiewicz, O. C., and R. L. Taylor, The Finite Element Method for Solid and Structural Mechanics, 6th ed., Elsevier Butterworth-Heinemann, Burlington, MA, 2005.
31. Wilson, E. L. et al., Incompatible displacement models, Numerical and Computer Methods in Structural Mechanics, ed. S. J. Fenves et al., 43-57, Academic Press, New York, 1973.
32. Taylor, R. L., P. J. Beresford, and E. L. Wilson, A non-conforming element for stress analysis, Int. J. Numer. Meth. Eng., 10, 1211-1219, 1976.
33. Simo, J. C., and M. S. Rifai, A class of mixed assumed strain methods and the method of incompatible modes, Int. J. Numer. Meth. Eng., 29, 1595-1638, 1990.
34. Hughes, T. J. R., Generalization of selective integration procedures to anisotropic and nonlinear media, Int. J. Numer. Meth. Eng., 15, 1413-1418, 1980.
35. Kosloff, D., and G. A. Frazier, Treatment of hourglass patterns in low order finite element codes, Int. J. Numer. Anal. Meth. Geomech., 2, 57-72, 1978.
36. Flanagan, D. P., and T. Belytschko, A uniform strain hexahedron and quadrilateral with orthogonal hourglass control, Int. J. Numer. Meth. Eng., 17, 679-706, 1981.
37. Kardestuncer, H., and D. H. Norrie, eds., Finite Element Handbook, 2.103, McGraw-Hill, New York, 1987.
38. Irons, B. M., Engineering applications of numerical integration in stiffness methods, AIAA J., 4, 2035-2037, 1966.
39. Kardestuncer, H., and D. H. Norrie, eds., Finite Element Handbook, 2.121-2.131, McGraw-Hill, New York, 1987.
40. Bathe, K. J., Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ, 1996.
41. Hughes, T. J. R., The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Dover Publications, Mineola, NY, 2000.
42. Zienkiewicz, O. C., R. L. Taylor, and J. Z. Zhu, The Finite Element Method: Its Basis and Fundamentals, Elsevier Butterworth-Heinemann, Burlington, MA, 6th ed., 2005.
43. Zienkiewicz, O. C., and R. L. Taylor, The Finite Element Method for Solid and Structural Mechanics, Elsevier Butterworth-Heinemann, Burlington, MA, 6th ed., 2005.
44. Strang, G., and G. J. Fix, An Analysis of the Finite Element Method, Prentice-Hall, Englewood Cliffs, NJ, 1973.
45. ANSYS Theory Reference Manual, Section 13.7.
46. Bazeley, G. P., Y. K. Cheung, B. M. Irons, and O. C. Zienkiewicz, Triangular elements in plate bending-conforming and nonconforming solutions, Proceedings of the First Conference on Matrix Methods in Structural Mechanics, Wright-Patterson AFB, Ohio, 1965.
47. Irons, B. M., E. A. de Oliveira, and O. C. Zienkiewicz, Comments on the paper: Theoretical foundations of the finite element method, by Int. J. Solids Struct., 6, 695-697, 1970.
48. Taylor, R. L., P. J. Beresford, and E. L. Wilson, A non-conforming element for stress analysis, Int. J. Numer. Meth. Eng., 10, 1211-1219, 1976.
49. Khan, A. S., and Huang, S., Continuum Theory of Plasticity, John Wiley & Sons, New York, 1995.
50. Lubliner, J., Plasticity Theory, Macmillan Publ. Co., New York, 1990.
51. Lubarda, V. A., Elastoplasticity Theory, CRC Press, New York, 2002.
52. Bland, D. R., The Theory of Linear Viscoelasticity, Pergamon Press, Oxford, England, 1960.
53. Christensen, R. M., Theory of Viscoelasticity, 2nd ed., Academic Press, New York, 1982.
54. Leitman, M. J., and G. M. Fisher, The linear theory of viscoelasticity, in Encyclopedia of Physics, Vol. VIa/3, ed. S. Flügge, Springer-Verlag, New York, 1973.
55. Lockett, F. J., Nonlinear Viscoelastic Solids, Academic Press, New York, 1972.
56. Baruh, H., Analytical Dynamics. WCB/McGraw-Hill, New York, 1999.
57. Benaroya, H., and M. L. Nagurka, Mechanical Vibration, 3rd ed., CRC Press, Boca Raton, FL, 2010.
58. Bottega, W. J., Engineering Vibrations, CRC Press, Boca Raton, FL, 2006.
59. Tapley, B. D. (ed.), Eshback’s Handbook of Engineering Fundamentals, p. 478, Wiley, New York, 1990.
60. Liebowitz, H. (ed.) Fracture, Volume II, Mathematical Fundamentals, Academic Press, New York, 1968.
61. Rice, J. R., A path independent integral and the approximate analysis of strain concentration by notches and cracks, J. Appl. Mech., 35, 379-386, 1968.
62. Shih, C. F., B. Moran, and T. Nakamura, Energy release rate along a three-dimensional crack front in a thermally stressed body, Int. J. Fract., 30, 2, 79-102, 1986.
63. Gdoutos, E. E., Fracture Mechanics, Springer, New York, 2005.
64. Kanninen, M. F., and C. H. Popelar, Advanced Fracture Mechanics, Oxford Univ. Press, London, 1985.
65. Bathe, K. J., MITC element, Finite Element Procedures, Prentice Hall, Englewood Cliffs, NJ, 1996, p. 425.
66. Hughes, T. J. R., T1 element, The Finite Element Method, Dover Pub., Mineola, NY, 2000, p. 342.
67. Zienkiewicz, O. C., and R. L. Taylor, The Finite Element Method for Solid and Structural Mechanics, Elsevier, New York, 2005, 6th ed., p. 397.
68. MacNeal, R. H., and R. L. Harder, A refined four-noded membrane element with rotational degrees of freedom, Comput. Struct., 28 (1), 75-84, 1988.
69. Marguerre, K., and H.-T. Woernle, Elastic Plates, Blaisdell Pub. Co., New York, 1969.
70. Bathe, K. J., Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ, 1996.
71. Cook, R. D., D. S. Malkus, M. E. Plesha, and R. J. Witt, Concepts and Applications of Finite Element Analysis, 4th ed., John Wiley & Sons, New York, 2002.
72. Ogden, R. W., Non-linear Elastic Deformations, 219, Dover Publications, New York, 1997.
73. Simo, J. C., and T. J. R. Hughes, Computational Inelasticity, Springer-Verlag, New York, 1998.
74. Mooney, M., A theory of large elastic deformation, J. Appl. Phys., 6, 582-592, 1940.
75. Rivlin, R. S., Forty years of nonlinear continuum mechanics, Proceedings of the IX International Congress on Rheology, Mexico, pp. 1-29, 1984.
76. Blatz, P. J., and W. L. Ko, Application of finite elastic theory to the deformation of rubbery materials, Trans. Soc. Rheol., 6, 223-251, 1962.
77. Kao, B. G., and L. Razgunas, On the determination of strain energy functions of rubbers, Proceedings of the VI International Conference on Vehicle Structural Mechanics, Detroit, MI, pp. 145-154, 1986.
78. Yeoh, O. H., Characterization of elastic properties of carbon-black-filled rubber vulcanizates, Rubber Chem. Technol., 63, 792, 1990.
79. Wempner, G. A., Discrete approximations related to nonlinear theories of solids, Int. J. Solids Struct., 7, 1581-1599, 1971.
80. Riks, E., The application of Newton’s method to the problem of elastic stability, J. Appl. Mech., 39, 1581-1599, 1972.
81. E. Riks, An incremental approach to the solution of snapping and buckling problems, Int. J. Solids Struct., 15, 529-551, 1979.
82. Forde, B. W. R., and S. F. Stiemer, Improved arc length orthogonality methods for nonlinear finite element analysis, Comput. Struct., 27, 625-630, 1987.
83. Bathe, K. J., Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ, 1996.
84. Dill, E. H., Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity, CRC Press, Boca Raton, FL, 2007.
85. Holzapfel, G. A., Nonlinear Solid Mechanics, Wiley, New York, 2000.
86. Ogden, R. W., Non-Linear Elastic Deformations, Dover Pub., Mineola, NY, 1997.
87. Gladwell, G. M. L., Contact Problems in the Classical Theory of Elasticity, p. 1394, Sijthoff & Noordhoff, The Netherlands, 1980.
88. Timoshenko, S., and J. N. Goodier, Theory of Elasticity, 2nd ed., pp. 381-382, McGraw-Hill, New York, 1951.
89. Kikuchi, N., and J. T. Oden, Contact problems in elasticity, A Study of Variational Inequalities and Finite Element Methods, SIAM, Philadelphia, PA, 1988.
90. Wriggers, P., Computational Contact Mechanics, McGraw-Hill, New York, 1951, 2nd ed., Springer-Verlag, Berlin, 2006.
91. Alawadhi, E. M., Finite Element Simulations Using ANSYS, CRC Press, Boca Raton, FL, 2010.
92. Madenci, E., and I. Guven, The Finite Element Method and Applications in Engineering Using ANSYS, Springer, New York, 2006.
93. Moaveni, S., Finite Element Analysis, Theory and Applications with ANSYS, 3rd ed., Prentice Hall, Upper Saddle River, NJ, 2008.
94. Stolarski, T. A., Y. Nakasone, and S. Yoshimoto, Engineering Analysis with ANSYS Software, Elsevier, New York, 2006.
95. All of these are published by SDC Publications, Mission, KS (Schroff Development Corporation, www.schroff. com)
96. Dadkhah, F., and J. Zecher, ANSYS Workbench Software, Tutorial with Multimedia CD, Release 12, SDC Pub., 2009.
97. Lawrence, K. L., ANSYS Workbench Tutorial, Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment, SDC Pub., 2010.
98. Lee, H.-H., Finite Element Simulations with ANSYS Workbench 12, SDC Pub., 2010.