Applied mechanics of solids

Applied Mechanics of Solids

Volumn , Issue , 2009, Pages 1-795

  Bower, Allan F ^a  

^a BROWN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85057501629     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (55)

1. Arruda, E., and Boyce, M.C. 1992. “A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials.” J. Mech. Phys. Solids 41:389.
2. Ashby, M.F., and Jones, D.R.H. 1997. Engineering Materials I. London: Butterworth-Heineman.
3. Bergstrom, J.S., and Boyce, M.C. 1998. “Constitutive modeling of the large strain time-dependent behavior of elastomers.” J. Mech. Phys. Solids. 46:931.
4. Blatz, P.J., and Ko, W.L. 1962. “Application of finite elastic theory to the deformation of rubbery materials.” Trans. Soc. Rheol. 6:224.
5. Bryant, M.D., and Keer, L.M. 1982. “Rough contact between elastically and geometrically identical curved bodies.” J. Appl. Mech. 49:345.
6. Cai, W., Arsenlis, A., Weinberger, C.R., and Bulatov, VV. 2006. “A non-singular continuum theory of dislocations.” J. Mech. Phys. Solids 54:561.
7. Charalambides, P.G., Cao, H.C., Lund, J., and Evans, A.G. 1990. “Development of a test-method for measuring the mixed mode fracture resistance of bimaterial interfaces.” Mech. Mater. 8:269.
8. Choi, S.T., Shin, H., and Earmme, Y.Y. 2003. “On the unifield approach to anisotropic elasticity, interface and crack in dissimilar media.” Int. J. Solids Struct 40:1411.
9. Clifton, R.J. 1990. “High strain rate behavior of metals.” Appl Mech Rev 43:S9–S22.
10. Coker, D., Lykotrafitis, G., Needleman, A., and Rosakis, A. 2005. “Frictional sliding modes along an interface between identical elastic plates subject to shear impact loading.” J. Mech. Phys. Solids 53:884.
11. Comninou, M. 1977. “Interface crack with friction in the contact zone.” J. Appl. Mech. 44:631.
12. Dieterich, J.H. 1979. “Modeling of rock friction. 1. Experimental results and constitutive equations.” J. Geophys. Res. 84:2161.
13. Eshelby, J.D. 1957. “The determination of the elastic field of an ellipsoidal inclusion and related prob-lems.” Proc. R. Soc. Lond. B. Biol. Sci. A241:376.
14. Eshelby, J.D. 1959. “The elastic field outside an ellipsoidal inclusion.” Proc. R. Soc. Lond. B. Biol. Sci. A252:561.
15. Flanagan, D.P., and Belytschko, T. 1981. “A uniform strain hexahedron and quadrilateral with orthogonal hourglass control.” Int. J. Num. Methods Eng. 17:679.
16. Freund, L.B., and Suresh, S. 2003. Thin Film Materials. Cambridge, UK: Cambridge University Press.
17. Frost, H.J., and Ashby, M.F. 1982. Deformation Mechanism Maps. New York: Pergamon Press.
18. Gearing, B.P., Moon, H.S., and Anand, L. 2001. “A plasticity model for interface friction: application to sheet metal forming.” Int. J. Plasticity 17:237.
19. Hamilton, G.M. 1983. “Explicit equations for stresses beneath a sliding spherical contact.” Proc. I. Mech. E. 197C:53.
20. He, M., and Hutchinson, J.W. 1981. “The penny-shaped crack and the plane strain crack in an infinite body of power-law material.” J. Appl. Mech. 48:830.
21. Hutchinson, J.W. 1968. “Singular behavior at the end of a tensile crack in a hardening material.” J. Mech. Phys. Solids 16:13.
22. Johnson, K.L. 1985. Contact Mechanics. Cambridge, UK: Cambridge University Press.
23. Kreyzig, E. 1998. Advanced Engineering Mathematics. New York: Wiley.
24. Leichti, K.M., and Knauss, W. 1982. “Crack propagation at material interfaces. I. Experimental technique to determine crack profiles.” Exp. Mech. 22:383.
25. Liu, Y., and Mahadevan, S. 2005. “Multiaxial high-cycle fatigue criterion and life prediction for metals.” Int. J. Fatigue 27:790.
26. Malvern, L.E. 1969. Introduction to the Mechanics of a Continuous Medium. Upper Saddle River, NJ: Prentice Hall.
27. Matthies, G., Strang, H. 1979. “The solution of nonlinear finite equations.” Int J. Num. Methods Eng. 14:1613.
28. McCrum, N.G., Buckley, C.P., and Bucknall, C.B. 1996. Principles of Polymer Engineering. New York: Oxford University Press, p. 112.
29. Mooney, M. 1940. “A theory of large elastic deformation.” J. Appl. Phys. 11:582.
30. Murakami, Y. 1987. Stress intensity factors handbook. New York: Pergamon Press.
31. Ogden, R. 1972a. “Large deformation isotropic elasticity: on the correlation of theory and experiment for incompressible rubberlike solids.” Proc. R. Soc. Lond. A326:565.
32. Ogden, R. 1972b. “Large deformation isotropic elasticity: on the correlation of theory and experiment for compressible rubberlike solids.” Proc. R. Soc. A328:567.
33. Ortiz, M., and Pandolfi, A. 1999. “Finite-deformation irreversible cohesive element for three-dimensional crack-propagation analysis.” Int. J. Num. Methods Eng. 44:1276.
34. Pierce, D., Asaro, R.J., and Needleman, A. 1983. “Material rate dependence and localized deformation in crystalline solids.” Acta Metall. 31:1951.
35. Prakash, V. 1998. “Frictional response of sliding interfaces subjected to time varying normal pressures.” J. Tribol. 120:27.
36. Quested, D.L., Pae, K.D., Sheinbein, J.L., and Newman, B.A. 1981. “Viscoplastic behavior of a rubber at high pressures.” J. Appl. Phys. 52:5977.
37. Rice, J.R., and Rosengren, G.F. 1968. “Plane strain deformation near a crack tip in a power-law hardening material.” J. Mech. Phys. Solids 16:31.
38. Rice, J.R., Paris, P.C., and Merkle, J.G. 1973. “Progress in flaw growth and fracture toughness testing.” ASTM STP 536:231.
39. Ruina, A.L. 1983. “Slip instability and state variable friction laws.” J. Geophys. Res. 88:10359.
40. Sackfield, A., and Hills, D.A. 1983. “A note on the Hertz contact problem: a correlation of standard formulae.” J. Strain Anal. 18:105.
41. Shute, N. 1948. No Highway. London: Heinemann.
42. Simmons, G., and Wang, H. 1970. Single Crystal Elastic Constants and Calculated Aggregate Properties. Cambridge, MA: MIT Press.
43. Simo, J.C., and Rifai, M.S. 1990. “Class of mixed assumed strain methods and the method of incompatible modes.” Int. J. Num. Methods Eng. 29:1595.
44. Simo, J.C., and Armero, F. 1992. “Geometrically nonlinear enhanced strain mixed methods and the method of incompatible modes.” Int. J. Num. Methods Eng. 33:1413.
45. Sternberg, E. 1954. “On Saint-Venant’s principle.” Q. J. Appl. Mech. 11:393.
46. Storakers, B. 1986. “On material representation and constitutive branching in finite compressible elasticity.” J. Mech. Phys. Solids 34:125.
47. Suo, Z., and Hutchinson, J.W. 1989. “Sandwich test specimens for measuring interface crack toughness.” Mat. Sci. Eng. A107:135.
48. Tada, H., Paris, P.C., and Irwin, G.R. 2000. The Stress Analysis of Cracks Handbook, 3rd Edition. New York: ASME.
49. Timoshenko, S.P., and Woinowsky-Krieger, S. 1959. Theory of Plates and Shells. New York: McGraw-Hill.
50. Ting, T.C.T. 1996. Anisotropic Elasticity: Theory and Applications. New York: Oxford University Press.
51. Treloar, L.R.G. 1944. “Stress-strain data for vulcanized rubber under various states of deformation.” Trans. Faraday Soc. 40:59.
52. Treloar, L.R.G. 1948. “Stresses and birefringence in rubber subjected to general homogeneous strain.” Proc. Phys. Soc. 60:135.
53. Wood, D.M. 1990. Soil Behavior and Critical State Soil Mechanics. Cambridge, UK: Cambridge University Press.
54. Wu, P.D., Neale, K., and Van der Giessen, E. 1996. “Simulation of the behaviour of FCC polycrystals during reversed torsion.” Int. J. Plasticity 12:1199.
55. Xu, X.P., and Needleman, A. 1995. “Numerical simulations of fast crack growth in brittle solids.” J. Mech. Phys. Solids 42:1397.