Conventional polymer processing additives

Polymer Processing Instabilities: Control and Understanding

Volumn , Issue , 2004, Pages 237-259

  Kharchenko, Semen B ^a   Hatzikiriakos, Savvas G ^b  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^b UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056981161     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (74)

1. Ramamurthy, A.V. Wall slip in viscous fluids and influence of materials of construction. J. Rheol. 1986, 337-357.
2. Denn, M.M. Extrusion instabilities and wall slip. Annu. Rev. Fluid Mech. 2001 33, 265-297.
3. Larson, R.G. Instabilities in viscoelastic flows. Rheol. Acta 1992, 213-263.
4. Han, C.D. Rheology in Polymer Processing; Academic Press: New York, 1976.
5. Vinogradov, G.V.; Malkin, A.Y. Rheology of Polymers; Springer-Verlag: New York, 1980.
6. De Kee, D.; Wissbrun, K.F. Polymer rheology. Phys. Today 1998, 51, 24-29.
7. Blyler, L.L.; Hart, A.C. Capillary flow instability of ethylene polymer melts. Polym. Eng. Sci. 1970, 10, 193-203.
8. Galt, J.; Maxwell, B. Velocity profiles for polyethylene melts. Plast. Eng. 1964, 115-132.
9. Atwood, B.T.; Schowalter, W.R. Measurements of slip at the wall during flow of high-density polyethylene through a rectangular conduit. Rheol. Acta 1989. 28 134-146.
10. Hatzikiriakos, S.G.; Dealy, J.M. Wall slip of molten high-density poly- ethylenes. 2. Capillary rheometer studies. J. Rheol. 1992, 36, 703-741.
11. Hatzikiriakos, S.G.; Dealy, J.M. Role of slip and fracture in the oscillating flow of HDPE in a capillary. J. Rheol. 1992, 36, 845-884.
12. Lupton, J.M., Regester, R.W. Melt flow of polyethylene at high rates. Polym. Eng. Sci. 1965, 5, 235-241.
13. Rudin, A.; Blacklock, J.E.; Nam, S.; Worm, A.T. Improvements in polyolefin processing with a fluorocarbon elastomer processing aid. ANTEC Tech. Pap. 1986, 32, 1154-1158.
14. Priester, D.E.; Stika, K.M.; Chapman, G.R.; McMinn, R.S.; Ferrandez, P. Quality control techniques for processing additives. ANTEC Tech. Pap. 1993. 39, 2528-2532.
15. Kanu, R.C.; Shaw, M.T. Rheology of polymer blends—simultaneous slippage and entrance pressure loss in the ethylene-propylene-diene (EPDM) viton system. Polym. Eng. Sci. 1982, 22, 507-511.
16. Buckmaster, M.D.; Henry, D.L.; Randa, S.K. High Speed Extrusion. US Patent 5, 688,4571997.
17. Kurtz, S.J.; Blakeslee, T.R.; Scarola, L.S. Methods for Reducing Sharkskin Melt Fracture During Extrusion of Ethylene Polymers. US Patent 4, 282, 1771981.
18. Rosenbaum, E.E.; Randa, S.K.; Hatzikiriakos, S.G.; Stewart, C.W. Extrusion Aid Combination. US Patent 00481792001.
19. Amos, S.E.; Giacoletto, G.M.; Horns, J.H.; Lavallee, C.; Woods, S.S. In Plastic Additives; Hanser: Munich, 2001.
20. Hatzikiriakos, S.G. Wall slip and melt fracture of HDPEs. Department of Chemical Engineering, McGill University, Montreal, Ph.D. Thesis, 1991.
21. Hatzikiriakos, S.G.; Stewart, C.W.; Dealy, J.M. Effect of surface-coatings on wall slip of LLDPE. Int. Polym. Process. 1993, 8, 30-35.
22. Hatzikiriakos, S.G.; Hong, P.; Ho, W.; Stewart, C.W. The effect of teflon (tm) coatings in polyethylene capillary extrusion. J. Appl. Polym. Sci. 1995, 55, 595-603.
23. Xing, K.C.; Schreiber, H.P. Fluoropolymers and their effect on processing linear low-density polyethylene. Polym. Eng. Sci. 1996, 36, 387-393.
24. Athey, R.J.; Thamm, R.C.; Souffle, R.D.; Chapman, G.R. The processing behavior of polyolefins containing a fluoroelastomer additive. ANTEC Tech. Pap. 1986, 32, 1149-1152.
25. Migler, K.B.; Gettinger, C.L.; Thalacker, V.P.; Conway, R. In Direct measurement of slippage induced by a polymer processing additive, Conference Proceedings of ANTEC; Society of Plastics Engineers: New York, NY, 1999; 3128-3131.
26. Migler, K.B.; Lavallee, C.; Dillon, M.P.; Woods, S.S.; Gettinger, C.L. Visualizing the elimination of sharkskin through fluoropolymer additives: coating and polymer-polymer slippage. J. Rheol. 2001, 45, 565-581.
27. Migler, K.B.; Lavallee, C.; Dillon, M.P.; Woods, S.S.; Gettinger, C.L. In Flow visualization of polymer processing additives effects, Conference Proceedings of ANTEC; Society of Plastics Engineers: Dallas, TX, 2001, 1132-1136.
28. Migler, K.B.; Son, Y.; Qiao, F.; Flynn, K. Extensional deformation, cohesive failure, and boundary conditions during sharkskin melt fracture. J. Rheol. 2002, 46, 383-400.
29. Hatzikiriakos, S.G.; Dealy, J.M. Effects of interfacial conditions on wall slip and sharkskin melt fracture of HDPE. Int. Polym. Process. 1993, 8, 36-44.
30. Kazatchkov, I.B.; Hatzikiriakos, S.G.; Stewart, C.W. Extrudate distortion in the capillary/slit extrusion of a molten polypropylene. Polym. Eng. Sci. 1995, 35, 1864-1871.
31. Anastasiadis, S.H.; Hatzikiriakos, S.G. The work of adhesion of polymer/wall interfaces and its association with the onset of wall slip. J. Rheol. 1998, 42, 795-812.
32. Hatzikiriakos, S.G. A slip model for linear-polymers based on adhesive failure. Int. Polym. Process. 1993, 8, 135-142.
33. Hill, D.A.; Hasegawa, T.; Denn, M.M. On the apparent relation between adhesive failure and melt fracture. J. Rheol. 1990, 34, 891-918.
34. Stewart, C.W. Wall slip in the extrusion of linear polyolefins. J. Rheol. 1993, 37, 499-513.
35. Achilleos, E.C.; Georgiou, G.; Hatzikiriakos, S.G. Role of processing aids in the extrusion of molten polymers. J. Vinyl. Addit. Technol. 2002, 8, 7-24.
36. Lavallee, C.; Woods, S.S. Die geometry and polymer processing additive (PPA) efficiency. ANTEC 2000.
37. Oriani, S.R.; Chapman, G.R. Fundamentals of melt fracture elimination using fluoropolymer process aids. SPE ANTEC Tech. Pap. 2003, 49, 22-26.
38. Shih, C.K. Rheological properties of incompatible blends of 2 elastomers. Polym. Eng. Sci. 1976, 16, 742-746.
39. Oliver, D.R. Influence of particle rotation on radial migration in the Poiseuille flow of suspensions. Nature 1962, 194, 1269-1271.
40. Shizgal, B.; Goldsmith, H.L.; Mason, S.G. The flow of suspensions through tubes iv: oscillatory flow of rigid spheres. Can. J. Chem. Eng. 1965, 43, 97-101.
41. Chan, P.C.H.; Leal, L.G. Motion of a deformable drop in a 2nd-order fluid. J. Fluid Mech. 1979, 92, 131-170.
42. Zhou, H.; Pozrikidis, C. Pressure-driven flow of suspensions of liquid-drops. Phys. Fluids 1994, 6, 80-94.
43. Coulliette, C.; Pozrikidis, C. Motion of an array of drops through a cylindrical tube. J. Fluid Mech. 1998, 358, 1-28.
44. Li, X.F.; Pozrikidis, C. Wall-bounded shear flow and channel flow of suspensions of liquid drops. Int. J. Multiph. Flow 2000, 26, 1247-1279.
45. Mortazavi, S.; Tryggvason, G. A numerical study of the motion of drops in Poiseuille flow. Part 1. Lateral migration of one drop. J. Fluid Mech. 2000, 411, 325-350.
46. Shih, C.K. Capillary extrusion and mold flow characteristics of an incompatible blend of two elastomers. In Science and Technology of Polymer Processing; MIT Press: Cambridge, 1979.
47. Kharchenko, S.B.; McGuiggan, P.M.; Migler, K.B. Flow induced coating of fluoropolymer additives: development of frustrated total internal reflection imaging. J. Rheol. 2003, 47, 1523-1545.
48. Leung, P.S.; Goddard, E.D.; Ancker, F.H. Process for Processing Thermoplastic Polymers. US Patent 4,857,5931989.
49. Duchesne, D.; Johnson, B.V. Extrudable Thermoplastic Hydrocarbon Polymer Composition. US Patent 4,855,3601989.
50. Duchesne, D.; Johnson, B.V. Extrudable Thermoplastic Hydrocarbon Polymer Composition. US Patent 5,015,6931989.
51. Blong, T.J., Greuel, M.P., Lavallee, C. Extrudable Thermoplastic Hydrocarbon Composition. US Patent 5,830,9471998.
52. Taylor, J.W.; Goyal, S.K.; Aubee, D.J.; Bonet, N.K.K. Polyethylene with reduced melt fracture. US Patent 5,459,187.
53. Blong, T.J.; Focquet, K.; Lavallee, C. Polymer processing additives and antioxidants… extruding under the influence. SPE ANTEC Tech. Pap. 1997, 43, 3011-3018.
54. Duchesne, D.; Blacklock, J.E.; Johnson, B.V.; Blong, T.J. Extrudable thermoplastic hydrocarbons and process aids. ANTEC Tech. Pap. 1989, 35, 1343-1347.
55. Leung, P.S.; Goddard, E.D.; Ancker, F.H. Process for Processing Thermoplastic Polymers. US Patent 4,925,8901990.
56. Focquet, K.; Dewitte, G.; Amos, S.E. Polymer Processing Additive Having Improved Stability. US Patent 6,294,6042001.
57. Oriani, S.R.; Chapman, G.R. Fundamentals of melt fracture elimination using fluoropolymer process aids. SPE ANTEC Tech. Pap. 2003, 49, 22-26.
58. Matzinos, P.; Tserki, V.; Gianikouris, C.; Pavlidou, E.; Panayiotou, C. Processing and characterization of LDPE/starch/PCL blends. Eur. Polym. J. 38, 1713-1720.
59. Slusarz, K.R.; Amos, S.E. The use of polymer processing additives to improve melt processing of M-LLDPE extrusion. SPE ANTEC Tech. Pap: San Francisco, CA, 2002.
60. Blong, T.J.; Focquet, K.; Lavallee, C. Polymer processing additives and antioxidants. ANTEC Tech. Pap. 1997, 43, 3011-3018.
61. Hatzikiriakos, S.G.; Kazatchkov, I.B.; Vlassopoulos, D. Interfacial phenomena in the capillary extrusion of metallocene polyethylenes. J. Rheol. 1997, 41, 1299-1316.
62. Lupton, K.E.; Pape, P.G.; John, V.B. RETEC Tech. Pap. 1988, 93-106.
63. Hauenstein, D.E.; Cimbalik, D.J.; Pape, P.G. ANTEC Tech. Pap. 1977, 21, 3002-3010.
64. Hong, Y.; Coombs, S.J.; Cooper-White, J.J.; Mackay, M.E.; Hawker, C.J.; Malmstrom, E.; Rehnberg, N. Film blowing of linear low-density polyethylene blended with a novel hyperbranched polymer processing aid. Polymer 2000, 41, 7705-7713.
65. Hong, Y.; Cooper-White, J.J.; Mackay, M.E.; Hawker, C.J.; Malmstrom, E.; Rehnberg, N. A novel processing aid for polymer extrusion: rheology and processing of polyethylene and hyperbranched polymer blends. J. Rheol. 1999, 43, 781-793.
66. Montoya, N.; Sierra, J.D.; del Pilar Noriega, M.; Osswald, T.A. Flow instability reduction of PP through blending of Eva. ANTEC Tech. Pap. 1999, 1270-1275.
67. Fujiyama, M.; Kawasaki, Y. Rheological properties of polypropylene high- density polyethylene blend melts. 1. Capillary-flow properties. J. Appl. Polym. Sci. 1991, 42, 467-480.
68. Rosenbaum, E.E.; Hatzikiriakos, S.G.; Stewart, C.W. Flow implications in the processing of tetrafluoroethylene/hexafluoropropylene copolymers. Int. Polym. Process. 1995, 10, 204-212.
69. Wise, G.M.; Denn, M.M.; Bell, A.T.; Mays J.W.; Hong, K.; Iatrou, H. Surface mobility and slip of polybutadiene melts in shear flow. J. Rheol. 2000, 44, 549567.
70. Legrand, F.; Piau, J.M.; Hervet, H. Wall slip of a polydimethylsiloxane extruded through a slit die with rough steel surfaces: micrometric measurement at the wall with fluorescent-labeled chains. J. Rheol. 1998, 42, 1389-1402.
71. Britton, M.M.; Mair, R.W.; Lambert, R.K.; Callaghan, P.T. Transition to shear banding in pipe and Couette flow of wormlike micellar solutions. J. Rheol. 1999, 43, 897-909.
72. Munstedt, H.; Schmidt, M.; Wassner, E. Stick and slip phenomena during extrusion of polyethylene melts as investigated by laser-Doppler velocimetry. J. Rheol. 2000, 44, 413-428.
73. Inn, Y.W.; Fischer, R.J.; Shaw, M.T. Visual observation of development of sharkskin melt fracture in polybutadiene extrusion. Rheol. Acta 1998, 37, 573-582.
74. Kazatchkov, I.B.; Yip, F.; Hatzikiriakos, S.G. The effect of boron nitride on the rheology and processing of polyolefins. Rheol. Acta 2000, 39, 583-594.