Enclosure fire

Enclosure Fire Dynamics

Volumn , Issue , 1999, Pages 1-388

  Karlsson, Björn ^a   Quintiere, James G ^b  

^a LUND UNIVERSITY   (Sweden)

^b UNIVERSITY OF MARYLAND   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056973315     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (134)

1. Drysdale, D., An Introduction to Fire Dynamics, Wiley-Interscience, New York, 1992.
2. The SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
3. Klote, J.H. and Milke, J.A., Design of Smoke Management Systems, American Society of Heating, Refrigeration and Air-Conditioning Engineers, Atlanta, GA, 1992.
4. Shields, T.J. and Silcock, G.W.H., Buildings and Fire, Longman Scientific and Technical, London, 1987.
5. Magnusson, S.E., Drysdale, D.D., Fitzgerald, R.W., Mowrer, F., Quintiere, J., Williamson, R.B., and Zalosh, R.G., A Proposal for a Model Curriculum in Fire Safety Engineering, Fire Safety Journal, Vol. 25, 1995.
6. Cox, G., “Compartment Fire Modelling,” Chapter 6 in Combustion Fundamentals of Fire, Cox, G., Ed., Academic Press, London, 1995.
7. Quintiere, J.G., Compartment Fire Modeling, in The SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
8. Friedman, R., “Status of Mathematical Modeling of Fires,” FMRC Technical Report RC81-BT-5, Factory Mutual Research Corp., Boston, 1981.
9. Faraday, M., The Chemical History of a Candle, Thomas Y. Crowell, New York, 1957. (First published in London, 1861.)
10. Lyons, J.W., Ed., “Fire Research on Cellular Plastics: The Final Report of the Products Research Committee (PRC), Library of Congress Catalog Card Number 80-83306, Products Research Committee, 1980.
11. Cooper, L.Y., “Compartment Fire-Generated Environment and Smoke Filling,” in The SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
12. Walton, W.D. and Thomas, P.H., “Estimating Temperatures in Compartment Fires,” in The SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
13. ISO, “Glossary of Fire Terms and Definitions,” ISO/CD 13943, International Standards Organization, Geneva, 1996.
14. Alpert, R.L. and Ward, E.J., “Evaluation of Unsprinklered Fire Hazards,” Fire Safety Journal, Vol. 7, No. 2, pp. 127-143, 1984.
15. Andersson, B., “Model Scale Compartment Fire Tests with Wall Lining Materials,” Report LUTVDG/(TVBB-3041), Department of Fire Safety Engineering, Lund University, Lund, Sweden, 1988.
16. FPA, “Fire tragedy at a football stadium,” Fire Prevention No. 181, July/August, Fire Protection Association, London, 1985.
17. Kawagoe, K., “Fire Behaviour in Rooms,” Report No. 27, Building Research Institute, Tokyo, 1958.
18. Bengtsson, L., “Flashover, Backdraft and Smoke Gas Explosion from a Fire Service Perspective” (in Swedish), Department of Fire Safety Engineering, Lund University, Lund, Sweden, 1998.
19. Babrauskas, V., “Burning Rates,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
20. Särdqvist, S., “Initial Fires: RHR, Smoke Production and CO Generation from Single Items and Room Fire Tests,” ISRN LUTVDG/TVBB--3070--SE, Department of Fire Safety Engineering, Lund University, Lund, Sweden, 1993.
21. Babrauskas, V., Greyson, S., Eds., Heat Release in Fires, E. & F. N. Spon, London, 1992.
22. Tewarson, A., “Generation of Heat and Chemical Compounds in Fires,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
23. Tewarson, A., “Flammability,” Physical Properties of Polymers Handbook, Ed. Mark, J.A., 1996.
24. NFPA, Guide for Smoke and Heat Venting, NFPA 204M, National Fire Protection Association, Quincy, MA, 1985.
25. Nelson, H.E., “FPETOOL: Fire Protection Engineering Tools for Hazard Estimation,” National Institute of Standards and Technology Internal Report 4380, Gaithersburg, MD, pp. 93-100, 1990.
26. Schifility, R.P., Meacham, B.J., and Custer, L.P., “Design of Detection Systems,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
27. Huggett, C., “Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements,” Fire and Materials, Vol. 4, pp. 61-65, 1980.
28. Heskestad, G., “Fire Plumes,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
29. Zukoski, E.E., Kubota, T., and Cetegen, B., “Entrainment in Fire Plumes,” Fire Safety Journal, Vol. 3, pp. 107-121, 1980.
30. McCaffrey, B.J., Purely Buoyant Diffusion Flames: Some Experimental Results, NBSIR 79-1910, National Bureau of Standards, 1979.
31. Thomas, P.H., Hinkley, P.L., Theobald, C.R., and Simms, D.L., “Investigations into the Flow of Hot Gases in Roof Venting,” Fire Research Technical Paper No. 7, HMSO, London, 1963.
32. Zukoski, E.E., “Properties of Fire Plumes,” in Combustion Fundamentals of Fire, Cox, G., Ed., Academic Press, London, 1995.
33. Hasemi, Y. and Nishihata, M., “Fuel Shape Effects on the Deterministic Properties of Turbulent Diffusion flames,” International Association of Fire Safety Science, Proceedings of the Second International Symposium, Hemisphere Publishing, pp. 275-284, Washington, D.C., 1989.
34. Alpert, R.L., “Calculation of response time of ceiling-mounted fire detectors,” Fire Technology, Vol. 8, pp. 181-195, 1972.
35. Evans, D.D., “Ceiling Jet Flows,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
36. You, H.Z. and Faeth, G.M., “An Investigation on Fire Impingement on a Horizontal Ceiling,” NBSGCR-81-304, National Bureau of Standards, CFR, Gaithersburg, MD, 1981.
37. McCaffrey, B., “Flame Height,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
38. Drysdale, D., “Diffusion Flames and Fire Plumes,” An Introduction to Fire Dynamics, Wiley-Interscience, New York, 1992.
39. Williamson, R.B., Revenaugh, A., and Mowrer, F.W., “Ignition Sources in Room Fire Tests and Some Implications for Flame Spread Evaluation,” International Association of Fire Safety Science, Proceedings of the Third International Symposium, New York, pp. 657-666, 1991.
40. Heskestad, G. and Hamada, T., “Ceiling Jets of Strong Fire Plumes,” Fire Safety Journal, Vol. 21, pp. 69-82, 1993.
41. Kandola, B.S., “Introduction to Mechanics of Fluids,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
42. Hinkley, H.P. and Gardiner, J.P., “Design Principles for Smoke Ventilation in Enclosed Shopping Centres,” Building Research Establishment Report, Garston, BRE, 1990.
43. Emmons, H.W., “Vent Flows,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
44. McCaffrey, N.J. and Rockett, J.A., “Static Pressure Measurements of Enclosure Fires,” Journal of Research of the National Bureau of Standards, June 1977.
45. McCaffrey, B.J., Quintiere, J.G., and Harkleroad, M.F., “Estimating Room Fire Temperatures and the Likelihood of Flashover Using Fire Test Data Correlations,” Fire Technology, Vol. 17, No. 2, pp. 98-119, 1981.
46. Walton, W.D. and Thomas, P.H., “Estimating Temperatures in Compartment Fires,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
47. Drysdale, D., An Introduction to Fire Dynamics, Wiley-Interscience, New York, 1992.
48. Foot, K.L., Pagni, P.J., and Alvares, N.J., “Temperature Correlations for Forced-Ventilated Compartment Fires,” Proceedings of the First International Symposium, International Association of Fire Safety Science, Hemisphere Publishing, pp. 139-148, Washington, D.C., 1986.
49. Mowrer, F.W. and Williamsson, R.B., “Estimating Room Temperatures from Fires along Walls and in Corners,” Fire Technology, Vol. 23, No. 2, 1987.
50. Karlsson, B., “Modeling Fire Growth on Combustible Lining Materials in Enclosures,” Department of Fire Safety Engineering, Lund University, Sweden, Report TVBB-1009, Lund 1992.
51. Magnusson, S.E. and Thelandersson, S., “Temperature-Time Curves for the Complete Process of Fire Development-A Theoretical Study of Wood Fuels in Enclosed Spaces,” Acta Polytechnica Scandinavica, Ci 65, Stockholm, 1970.
52. EUROCODE 1: Basis of Design and Actions on Structures. Part 2-2: Actions on Structures Exposed to Fire. ENV 1991-2-2: 1995 E, European Committee for Standardization, Brussels, 1995.
53. International Standards Organization, “Fire Resistance Tests. Elements of Building Construction,” ISO 834, International Organisation for Standardisation, Geneva, 1975.
54. CIB W14, “Design Guide for Structural Fire Safety,” Fire Safety Journal, Vol. 10, No. 2, 1986.
55. Pettersson, O., Magnusson, S.E., and Thor, J., “Fire Engineering Design of Steel Structures,” Swedish Institute of Steel Construction, Publication No. 50, Stockholm, 1976.
56. Huggett, C., “Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements,” Fire and Materials, Vol. 4, pp. 61-65, 1980.
57. Kawagoe, K., “Fire Behaviour in Rooms”, Report No. 27, Building Research Institute, Tokyo, 1958.
58. Hägglund, B., “Simulating Fires in Natural and Forced Ventilated Enclosures,” FOA Rapport C 20637-2.4, National Defense Research Institute, Stockholm, 1986.
59. Babrauskas, V. and Williamsson, R.B., “Post Flashover Compartment Fires: Bases of a Theoretical Model,” Fire and Materials, Vol. 3, pp. 1-7, 1978.
60. Shields, T.J. and Silcock, G.W.H., Buildings and Fire, Longman Scientific and Technical, London, 1987.
61. Babrauskas, V., “A Closed-Form Approximation for Post-Flashover Compartment Fire Temperatures,” Fire Safety Journal, Vol. 4, pp. 63-73, 1981.
62. Pettersson, O., “The Parametric Temperature-Time Curves According to ENV 1991-2-2:1995 E-A Summary Evaluation,” International Standards Organization for Standardization, ISO/TC92/SC2/WG2:N261, Department of Fire Safety Engineering, Lund University, Sweden, 1996.
63. Anderberg, Y. and Pettersson, O., “Fire Engineering Design of Concrete Structures” (in Swedish), Swedish Council for Building Research, T13:1992, Stockholm, 1992.
64. Rockett, J.A. and Milke, J.A., “Conduction of Heat in Solids,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
65. Atreya, A., “Convection Heat Transfer,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
66. Tien, C.L., Lee, K.Y., and Stretton, A.J., “Radiation Heat Transfer,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
67. Cooper, L.Y., “Heat Transfer from a Buoyant Plume to an Unconfined Ceiling,” Journal of Heat Transfer, Vol. 104, No. 3, pp. 446-451, 1982.
68. Alpert, R.L., “Convective Heat Transfer in the Impingement Region of a Buoyant Plume,” Journal of Heat Transfer, Vol. 109, pp. 120-124, Feb. 1987.
69. Kokkala, M., “Heat Transfer to and Ignition of Ceiling by an Impinging Diffusion Flame,” Research Report 586, Fire Technology Laboratory, Technical Research Center of Finland, Espoo, February 1989.
70. Quintiere, J.G. and McCaffrey, B.J., “The Burning of Wood and Plastic Cribs in an Enclosure:Volume I,” NBSIR 80-2054, National Bureau of Standards, Washington, D.C., November 1980.
71. Veldman, C.C., Kubota, T., and Zukoski, E.E., “An Experimental Investigation of the Heat Transfer from a Buoyant Gas Plume to a Horizontal Ceiling, Part 1: Unobstructed Ceiling,” NBS-GCR-77-97, National Bureau of Standards, Washington, D.C., 1975.
72. You, H.Z. and Faeth, G.M., “Ceiling Heat Transfer during Fire Plume and Fire Impingement,” Fire and Materials, Vol. 3, p. 140, 1979.
73. Alpert, R.L., “Convective Heat Transfer in the Impingement Region of a Buoyant Plume,” Journal of Heat Transfer, Vol. 109, pp. 120-124, Feb. 1987.
74. Burgess, D.S., Grumer, J., and Wolfhard, H.G., “Burning Rates of Liquid Fuels,” in Berl, W.G. (Ed.), The Use of Models in Fire Research, National Academy of Sciences, Washington, D.C., p. 68, 1961.
75. Orloff, L., Modak, A.T., and Alpert, R.L., “Burning of Large Scale Vertical Surfaces,” Sixteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, p. 1345, 1977.
76. Modak, A.T., “Thermal Radiation from Pool Fires,” Combustion and Flame, Vol. 29, p. 177, 1977.
77. Dayan, A. and Tien, C.L., “Radiant Heating from a Cylindrical Fire Column,” Combustion Science and Technology, Vol. 9, p. 41, 1974.
78. Modak, A.T., “Radiation from Products of Combustion,” FMRC No. OAOE6.BU-1, Factory Mutual Research Corp., Norwood, MA, 1978.
79. Drysdale, D., An Introduction to Fire Dynamics, Wiley-Interscience, New York, 1992.
80. Sato, T. and Kunimoto, T., Mem. Faculty of Engineering, Kyoto University, Vol. 31, p. 47, 1969.
81. Yuen, W.W. and Tien, C.L., “A Simple Calculation Scheme for the Luminous Flame Emissivity,” Sixteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, 1977.
82. Hägglund, B. and Persson, L.E., “The Heat Radiation from Petroleum Fires,” FOA Report C20126-D6 (A3), Forsvarets Forskningsanstalt, Stockholm, 1976.
83. Beyreis, J.R., Monsen, H.W., and Abbasi, A.F., “Properties of Wood Crib Flames,” Fire Technology, Vol. 7, pp. 145-155, 1971.
84. Fang, J.B., “Measurement of the Behaviour of Incidental Fires in a Compartment,” NBSIR 75-679, National Bureau of Standards, Washington, D.C., 1975.
85. Quintiere, J.G., “Radiative Characteristics of Fire Fighters’ Coat Fabrics,” Fire Technology, Vol. 10, p. 153, 1974.
86. Klote, J.H. and Milke, J.A., Design of Smoke Management Systems, American Society of Heating, Refrigeration and Air-Conditioning Engineers, Atlanta, GA, 1992.
87. Welty, J.R., Wilson, R.E., and Wicks, C.E., Fundamentals of Momentum Heat and Mass Transfer, 2nd ed., John Wiley & Sons, London, 1976.
88. Zukoski, E.E., “Development of a Stratified Ceiling Layer in the Early Stages of a Closed Room Fire,” Fire and Materials, Vol. 2, No. 2, 1978.
89. Hägglund, B., Jansson, R., and Nireus, K., “Smoke Filling Experiments in a 6×6×6 meter Enclosure,” FOA Report C 20585-D6, National Defence Research Establishment, Sweden, 1985.
90. Yamana, T. and Tanaka, T., “Smoke Control in Large Scale Spaces, Part 1: Analytical Theories for Simple Smoke Control Problems,” Fire Science and Technology, Vol. 5, No. 1, 1985.
91. Yamana, T. and Tanaka, T., “Smoke Control in Large Scale Spaces, Part 2: Smoke Control Experiments in a Large Scale Space,” Fire Science and Technology, Vol. 5, No. 1, 1985.
92. Drysdale, D., “Heat Transfer and Aerodynamics,” An Introduction to Fire Dynamics, Wiley-Interscience, New York, 1992.
93. Tewarson, A., “Generation of Heat and Chemical Compounds in Fires,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
94. Beyler, C.L., Fire Safety Journal, Vol. 10, No. 47, 1986.
95. Zukoski, E.E., Toner, S.J., Morehart, J.H., and Kubota, T., Fire Safety Science-Proceedings of the Second International Symposium, Hemisphere Publications, Washington, D.C., pp. 295-305, 1989.
96. Toner, S.J., Zukoski, E.E., and Kubota, T., Government Contractor’s Report GCR-85-493, National Bureau of Standards, Washington, D.C., May 1985.
97. Morehart, J.H., Zukoski, E.E., and Kubota, T., Government Contractor’s Report GCR-90-585, National Institute of Standards and Technology, Washington, D.C., December 1990.
98. Beyler, C.L., Fire Safety Science-Proceedings of the First International Symposium, Hemisphere Publications, Washington, D.C., pp. 431-440, 1986.
99. Gottuk, D.T. and Roby, R.J., “Effect of Combustion Conditions on Species Production.” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
100. Pitts, W.M., “The Global Equivalence Ratio Concept and the Formation Mechanisms of Carbon Monoxide in Enclosure Fires,” Prog. Energy Combust. Sci., Vol. 21, pp. 197-237, 1995.
101. Mulholland, G.W., “Position Paper Regarding CO Yield,” Appendix C in Nelson, H.E., FPETOOL:Fire Protection Engineering Tools for Hazard Estimation, National Institute of Standards and Technology Internal Report 4380, Gaithersburg, MD, pp. 93-100, 1990.
102. Beyler, C., “Introduction to Fire Modeling,” Fire Protection Handbook, National Fire Protection Association, Quincy, MA, 1991.
103. Watts, J.M., “Probabilistic Fire Models,” Fire Protection Handbook, National Fire Protection Association, Quincy, MA, 1991.
104. Berlin, G.N., “Probability Models in Fire Protection Engineering,” SFPE Handbook of Fire Protection Engineering, SFPE, Quincy, MA, 1988.
105. Evans, D.D. and Stroup, D.W., “Methods to Calculate the Response Time of Heat and Smoke Detectors Installed below Large Unobstructed Ceilings,” Fire Tech., Vol. 22, No. 1, 1986.
106. Kisko, T.M. and Francis, R.L., “EVACNET+: A Computer Program to Determine Optimal Building Evacuation Plans,” Fire Safety Journal, Vol. 9, 1985.
107. Alvord, D.M., “Status Report on the Escape and Rescue Model and the Fire Emergency Evacuation Simulation for Multifamily Buildings,” Report NBS-GCR-85-496, National Bureau of Standards, Gaithersburg, MD, 1995.
108. Levin, B., “EXITT-An Evacuation Model of Occupant Decisions and Actions in Residential Fires,” Proc. of the Second International Symposium on Fire Safety Science, Hemisphere Publishing, Washington, D.C., 1989.
109. Thompson, P. and Marchant E., “A Computer Model for the Evacuation of Large Building Populations,” Fire Safety Journal, Vol. 24, No. 2, 1995.
110. Owen, M., Galea, E.R., and Lawrence, P., “Advanced Occupant Behavioural Features of the Building-EXODUS Evacuation Model,” Fire Safety Science-Proc. of the Fifth International Symposium, International Association for Fire Safety Science, 1997.
111. Anderberg, Y., “User’s Manual for TCD 3.0 with SUPER-TEMPCALC,” Fire Safety Design, Lund, Sweden, 1990.
112. Friedman, R., “Survey of Computer Models for Fire and Smoke,” 2nd ed., Factory Mutual Research Corp., Norwood, MA, 1991.
113. Quintiere, J.G., “Compartment Fire Modeling,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
114. Rockett, J.A., “Using the Harvard/NIST Mark VI Fire Simulation,” NISTIR 4464, National Institute of Standards and Technology, November 1990.
115. Emmons, H.W., “Vent Flows,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
116. McCaffrey, B.J. and Rockett, J.A., “Static Pressure Measurements of Enclosure Fires,” J. of Research, Nat. Bur. Stand., June 1977.
117. Epstein, M., “Buoyant Driven Exchange Flow through Small Openings in Horizontal Partitions,” Jour. of Heat Transfer, Vol. 110, ASME, 1988.
118. Cooper, L.Y., “An Algorithm and Associated Computer Subroutine for Calculating Flow through a Horizontal Ceiling Flow Vent in a Zone-Type Compartment Fire Model,” NISTIR 4402, National Institute of Standards and Technology, October 1990.
119. McCaffery, B.J. and Quintiere, J.G., “Buoyancy Driven Countercurrent Flows Generated by a Fire Source,” Heat Transfer and Turbulent Buoyant Convection, Vol. 2, D.B. Spalding and N. Afgan (Eds.), Hemisphere Publishing, Washington, D.C., pp. 457-472, 1977.
120. Lim, C.S, Zukoski, E.E., and Kubota, T. “Mixing in Doorway Flows and Entrainment in Fire Flames,” Cal. Inst. of Technology, NBS Grant No. NB82NADA3033, June 1984.
121. Jaluria, Y., “Natural Convection Wall Flows,” SFPE Handbook of Fire Protection Engineering, P.J. DiNenno (Ed.), Chap.1-7, SFPE/NFPA, Quincy, MA, 1988.
122. Klote, J.H. and Cooper, L.Y., “Model of a Simple Fan-Resistance Ventilation System and Its Application to Fire Modeling,” NISTIR 89-4141, National Institute of Standards and Technology, September 1989.
123. Alpert, R.L., “Convective Heat Transfer in the Impingement Region of a Buoyant Plume,” Jour. of Heat Transfer, Vol. 109, ASME, February 1987.
124. You, H.Z. and Faeth, G.M., “Ceiling Heat Transfer during Fire Plume and Fire Impingement,” Fire and Materials, Vol. 3, No. 3, 1979.
125. Kokkala, M.A., “Experimental Study of Heat Transfer to Ceiling from an Impinging Diffusion Flame,” Fire Safety Science-Proc. of 3rd Inter. Symp., G. Cox and B. Langford (Eds.), Elsevier Applied Science, London, 1991.
126. Rockett, J.A. and Milke, J.A., “Conduction of Heat in Solids,” SFPE Handbook of Fire Protection Engineering, 2nd ed., National Fire Protection Association, Quincy, MA, 1995.
127. Cox, G., “Compartment Fire Modelling,” Chapter 6 in Combustion Fundamentals of Fire, Cox, G. (Ed.), Academic Press, London, 1995.
128. Stroup, D.W., “Using Field Modeling to Simulate Enclosure Fires,” The SFPE Handbook of Fire Protection Engineering, Second Edition, The National Fire Protection Association, Quincy, MA, 1995.
129. Tuovinen, H., “Simulation of Combustion and Fire-Induced Flows in Enclosures,” Report LUTVDG/(TVBB-1010), Department of Fire Safety Engineering, Lund University, Lund, Sweden, 1995.
130. Lockwood, F.C. and Shah, N.G., 18th Symposium (International) on Combustion, Combustion Institute, Pittsburgh, PA, pp. 1405-1414, 1981.
131. Yan, Z. and Holmstedt, G., “Fast, Narrow-Band Computer Model for Radiation Calculations,” Numerical Heat Transfer, Part B, Vol. 31, pp. 61-71, 1997.
132. Viskanta, R. and Menguc, M.P., “Radiation Heat Transfer in Combustion Systems,” Prog. Energy Combust. Sci., Vol. 13, pp. 97-160, 1987.
133. Magnussen, B.F. and Hjertager, B.H., “On Mathematical Modelling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion,” 16th Symp. (Int.) Combust., Combustion Institute, Pittsburgh, PA, 1976.
134. Peters, N., “Laminar Flamelet Concepts in Turbulent Combustion,” 21st Symp. (Int.) Combust., Combustion Institute, Pittsburgh, PA, 1986.