Distribution reliability and power quality

Distribution Reliability and Power Quality

Volumn , Issue , 2005, Pages 1-288

  Short, T A ^a  

^a EPRI Solutions Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056938331     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (242)

1. Albrecht, P. F. and Campbell, H. E., “Reliability Analysis of Distribution Equipment Failure Data,” EEI T&D Committee, New Orleans, LA, January 20, 1972. As cited by Duckett and McDonough (1990).
2. Billinton, R., “Comprehensive Indices for Assessing Distribution System Reliability,” IEEE International Electrical, Electronics Conference and Exposition, 1981
3. Billinton, R., 2002. Personal communication.
4. Billinton, R. and Allan, R. N., Reliability Evaluation of Power Systems, Pitman Advanced Publishing Program, 1984.
5. Brown, R. E., Electric Power Distribution Reliability, Marcel Dekker, New York, 2002.
6. Brown, R. E. and Burke, J. J., “Managing the Risk of Performance Based Rates,” IEEE Transactions on Power Systems, vol. 15, no. 2, pp. 893-8, May 2000.
7. Brown, R. E., Gupta, S., Christie, R. D., Venkata, S. S., and Fletcher, R., “Distribution System Reliability Assessment: Momentary Interruptions and Storms,” IEEE Transactions on Power Delivery, vol. 12, no. 4, pp. 1569-75, October 1997.
8. Brown, R. E. and Hanson, A. P., “Impact of Two-Stage Service Restoration on Distribution Reliability,” IEEE Transactions on Power Systems, vol. 16, no. 4, pp. 624-9, November 2001.
9. Brown, R. E., Hanson, A. P., Willis, H. L., Luedtke, F. A., and Born, M. F., “Assessing the Reliability of Distribution Systems,” IEEE Computer Applications in Power, vol. 14, no. 1, pp. 44-49, 2001.
10. Brown, R. E. and Ochoa, J. R., “Distribution System Reliability: Default Data and Model Validation,” IEEE Transactions on Power Systems, vol. 13, no. 2, pp. 704-9, May 1998.
11. Burke, J. J., Power Distribution Engineering: Fundamentals and Applications, Marcel Dekker, New York, 1994.
12. CEA 160 D 597, Effect of Lightning on the Operating Reliability of Distribution Systems, Canadian Electrical Association, Montreal, Quebec, 1998.
13. CEA 290 D 975, Assessing the Effectiveness of Existing Distribution Monitoring Techniques, Canadian Electrical Association, 1995.
14. CEA, CEA 2000 Annual Service Continuity Report on Distribution System Performance in Electric Utilities, Canadian Electrical Association, 2001.
15. Chowdhury, A. A. and Koval, D. O., “Delivery Point Reliability Measurement,” IEEE Transactions on Industry Applications, vol. 32, no. 6, pp. 1440-8, November/December 1996.
16. Christie, R. D., “Statistical methods of classifying major event days in distribution systems,” IEEE Power Engineering Society Summer Meeting, 2002.
17. Coulter, R. T., "2001 Electricity Distribution Price Review Reliability Service Standards,” Prepared for the Office of the Regulator-General, Victoria, Australia and Service Standards Working Group, 1999.
18. Duckett, D. A. and McDonough, C. M., “A guide for transformer replacement based on reliability and economics,” Rural Electric Power Conference, 1990. Papers Presented at the 34th Annual Conference, General Electric Co., Hickory, NC, 1990.
19. EEI, “EEI Reliability Survey,” Minutes of the 8th Meeting of the Distribution Committee, March 28-31, 1999.
20. EPRI TR-109178, Distribution Cost Structure - Methodology and Generic Data, Electric Power Research Institute, Palo Alto, CA, 1998.
21. IEEE Std. 493-1997, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book).
22. IEEE Std. 1366-2000, IEEE Guide for Electric Power Distribution Reliability Indices.
23. IEEE Working Group on System Design, http://grouper.ieee.org/groups/td/dist/sd/utility2.xls, 2001.
24. Indianapolis Power & Light, “Comments of Indianapolis Power & Light Company to Proposed Discussion Topic, Session 7, Service Quality Issues,” submission to the Indiana Regulatory Commission, 2000.
25. Keener, R. N., “The Estimated Impact of Weather on Daily Electric Utility Operations,” Social and Economic Impacts of Weather, Proceedings of a workshop at the University Corporation for Atmospheric Research, Boulder, CO, 1997. Available at http://sciencepolicy.colorado.edu/socasp/weather1/keener.html.
26. MacGorman, D. R., Maier, M. W., and Rust, W. D., “Lightning Strike Density for the Contiguous United States from Thunderstorm Duration Records.” Report to the U.S. Nuclear Regulatory Commission, # NUREG/CR-3759, 1984.
27. PA Consulting, “Evaluating Utility Operations and Customer Service,” FMEA-FMPA Annual Conference, Boca Raton, FL, July 23-26, 2001.
28. Settembrini, R. C., Fisher, J. R., and Hudak, N. E., “Reliability and Quality Comparisons of Electric Power Distribution Systems,” IEEE Power Engineering Society Transmission and Distribution Conference, 1991.
29. Short, T. A., “Reliability Indices,” T&D World Expo, Indianapolis, IN, 2002.
30. Sullivan, M. and Sheehan, M., “Observed Changes in Residential and Commercial Customer Interruption Costs in the Pacific Northwest Between 1989 and 1999,” IEEE Power Engineering Society Summer Meeting, 2000.
31. Sullivan, M. J., Vardell, T., and Johnson, M., “Power Interruption Costs to Industrial and Commercial Consumers of Electricity,” IEEE Transactions on Industry Applications, vol. 33, no. 6, pp. 1448-58, November/December 1997.
32. Abrahams, R., Keus, A. K., Koch, R. G., and van Coller, J. M., “Results of Comprehensive Testing of a 120kW CSI Variable Speed Drive at Half Rating,” PQA Conference, 1999.
33. Bollen, M. H. J., Understanding Power Quality Problems: Voltage Sags and Interruptions, IEEE Press, New York, 2000.
34. Bowes, K. B., “Effects of Power Line Disturbances on Electronic Products,” Power Quality Assurance Magazine, vol. Premier V, pp. 296-310, 1990.
35. CEA, CEA 2000 Annual Service Continuity Report on Distribution System Performance in Electric Utilities, Canadian Electrical Association, 2001.
36. Chong, W. Y., “Effects of Power Quality on Personal Computer,” Masters thesis, University of Queensland, 2000.
37. Collins Jr., E. R. and Bridgwood, M. A., “The Impact of Power System Disturbances on AC-Coil Contactors,” Textile, Fiber, and Film Industry Technical Conference, 1997.
38. Conrad, L., Kevin, L., and Cliff, G., “Predicting and Preventing Problems Associated with Remote Fault-Clearing Voltage Dips,” IEEE Transactions on Industry Applications, vol. 27, pp. 167-72, 1991.
39. Courtois, E. L., 2001. Personal communication.
40. Courtois, E. L. and Deslauriers, D., “Voltage Variations Susceptibility of Electronic Residential Equipment,” PQA Conference, 1997.
41. Dorr, D. S., “Point of Utilization Power Quality Study Results,” IEEE Transactions on Industry Applications, vol. 31, no. 4, pp. 658-66, July/August 1995.
42. Dorr, D. S., Hughes, M. B., Gruzs, T. M., Juewicz, R. E., and McClaine, J. L., “Interpreting Recent Power Quality Surveys to Define the Electrical Environment,” IEEE Transactions on Industry Applications, vol. 33, no. 6, pp. 1480-7, November 1997.
43. EEI, “EEI Reliability Survey,” Minutes of the 8th Meeting of the Distribution Committee, March. 28-31, 1999.
44. EPRI 1000340, Guidebook on Custom Power Devices, EPRI, Palo Alto, CA, 2000.
45. EPRI 1001665, Power Quality Improvement Methodology for Wires Companies, Electric Power Research Institute, Palo Alto, CA, 2003.
46. EPRI 1007281, Analysis of Extremely Reliable Power Delivery Systems: A Proposal for Development and Application of Security, Quality, Reliability, and Availability (SQRA) Modeling for Optimizing Power System Configurations for the Digital Economy, Electric Power Research Institute, Palo Alto, CA, 2002.
47. EPRI PEAC Brief No. 7, Undervoltage Ride-Through Performance of Off-the-Shelf Personal Computers, EPRI PEAC, Knoxville, TN, 1992.
48. EPRI PEAC Brief No. 9, Low-Voltage Ride-Through Performance of 5-hp Adjustable-Speed Drives, EPRI PEAC, Knoxville, TN, 1993.
49. EPRI PEAC Brief No. 10, Low-Voltage Ride-Through Performance of AC Contactor Motor Starters, EPRI PEAC, Knoxville, TN, 1993.
50. EPRI PEAC Brief No. 12, Low-Voltage Ride-Through Performance of a Modified Personal Computer Power Supply, EPRI PEAC, Knoxville, TN, 1993.
51. EPRI PEAC Brief No. 17, Electronic Digital Clock Performance During Steady-State and Dynamic Power Disturbances, EPRI PEAC, Knoxville, TN, 1994.
52. EPRI PEAC Brief No. 30, Ride-Through Performance of Adjustable- Speed Drives with Flying Restart, EPRI PEAC, Knoxville, TN, 1995.
53. EPRI PEAC Brief No. 39, Ride-Through Performance of Programmable Logic Controllers, EPRI PEAC, Knoxville, TN, 1996.
54. EPRI PEAC Brief No. 44, The Effects of Point-on-Wave on Low-Voltage Tolerance of Industrial Process Devices, EPRI PEAC, Knoxville, TN, 1998.
55. EPRI PEAC commentary #3, Performance of AC Motor Drives During Voltage Sags and Momentary Interruptions, 1998.
56. EPRI TP-113781, Reliability Benchmarking Application Guide for Utility/Customer PQ Indices, Electric Power Research Institute, Palo Alto, CA, 1999.
57. EPRI TR-106294-V2, An Assessment of Distribution System Power Quality: Volume 2:Statistical Summary Report, Electric Power Research Institute, Palo Alto, CA, 1996.
58. EPRI TR-106294-V3, An Assessment of Distribution System Power Quality: Volume 3:Library of Distribution System Power Quality Monitoring Case Studies, Electric Power Research Institute, Palo Alto, CA, 1996.
59. IEEE Std. 493-1997, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book).
60. IEEE Std. 1159-1995, IEEE Recommended Practice for Monitoring Electric Power Quality.
61. IEEE Std. 1366-2000, IEEE Guide for Electric Power Distribution Reliability Indices.
62. Information Technology Industry Council (ITI), “ITI (CBEMA) Curve Application Note,” 2000. Available at http://www.itic.org.
63. Kojovic, L. A. and Hassler, S. P., “Application of Current Limiting Fuses in Distribution Systems for Improved Power Quality and Protection,” IEEE Transactions on Power Delivery, vol. 12, no. 3, pp. 791-800, April 1997.
64. Kojovic, L. A., Hassler, S. P., Leix, K. L., Williams, C. W., and Baker, E. E., “Comparative Analysis of Expulsion and Current-Limiting Fuse Operation in Distribution Systems for Improved Power Quality and Protection,” IEEE Transactions on Power Delivery, vol. 13, no. 3, pp. 863-9, July 1998.
65. Mansoor, A., Collins, E. R., Bollen, M. H. J., and Lahaie, S., “Effects of Unsymmetrical Voltage Sags on Adjustable Speed Drives,” PQA-97, Stockholm, Sweden, June 1997.
66. McEachern, A., “How to Increase Voltage Sag Immunity,” 2001. Available at http:// powerstandards.com/tutorials/immunity.htm.
67. Sabin, D. D., Grebe, T. E., and Sundaram, A., “RMS Voltage Variation Statistical Analysis for a Survey of Distribution System Power Quality Performance,” IEEE/PES Winter Meeting Power, February 2004.
68. Sekine, Y., Yamamoto, T., Mori, S., Saito, N., and Kurokawa, H., “Present State of Momentary Voltage Dip Interferences and the Countermeasures in Japan,” International Conference on Large Electric Networks (CIGRE), September 1992.
69. SEMI F42-0600, Test Method for Semiconductor Processing Equipment Voltage Sag Immunity, Semiconductor Equipment and Materials International, 1999.
70. SEMI F47-0200, Specification for Semiconductor Processing Equipment Voltage Sag Immunity, Semiconductor Equipment and Materials International, 1999.
71. Short, T. A., Mansoor, A., Sunderman, W., and Sundaram, A., “Site Variation and Prediction of Power Quality,” IEEE Transactions on Power Delivery, 2002. Preprint submission.
72. St. Pierre, C., “Don’t Let Power Sags Stop Your Motors,” Plant Engineering, pp. 76-80, September 1999.
73. Stephens, M., Johnson, D., Soward, J., and Ammenheuser, J., Guide for the Design of Semiconductor Equipment to Meet Voltage Sag Immunity Standards, International SEMATECH, 1999.
74. Technology Transfer #99063760B-TR, available at http:// www.sematech.org/public/docubase/document/3760btr.pdf.
75. Williams, B. R., Schmus, W. R., and Dawson, D. C., “Transmission Voltage Recovery Delayed by Stalled Air Conditioner Compressors,” IEEE Transactions on Power Systems, vol. 7, no. 3, pp. 1173-81, August 1992.
76. Woodley, N. H., Morgan, L., and Sundaram, A., “Experience with an Inverter-Based Dynamic Voltage Restorer,” IEEE Transactions on Power Delivery, vol. 14, no. 3, pp. 1181-6, July 1999.
77. Abetti, P. A., Johnson, I. B., and Schultz, A. J., “Surge Phenomena in Large Unit-Connected Steam Turbine Generators,” AIEE Transactions, vol. 71, part 3, pp. 1035-47, December 1952.
78. Ba, A. O., Bergeron, R., and Laperriere, A., “Source impedances of the Canadian distribution systems,” CIRED 97, 1997.
79. Bellei, T. A., O’Leary, R. P., and Camm, E. H., “Evaluating Capacitor-Switching Devices for Preventing Nuisance Tripping of Adjustable-Speed Drives Due to Voltage Magnification,” IEEE Transactions on Power Delivery, vol. 11, no. 3, pp. 1373-8, July 1996.
80. Bohn, J., “Utility Concerns for Electric Vehicle Battery Charger Penetration,” Panel on Utility Application of Harmonic Limits, IEEE PES Summer Power Meeting, 1996.
81. Dwyer, R., Khan, A. K., McGranaghan, M., Tang, L., McCluskey, R. K., Sung, R., and Houy, T., “Evaluation of Harmonic Impacts from Compact Fluorescent Lights on Distribution Systems,” IEEE/PES Winter Power Meeting, 1995.
82. Emanuel, A. E., Janczak, J., Pileggi, D. J., Gulachenski, E. M., Breen, M., Gentile, T.J., and Sorensen, D., “Distribution Feeders with Nonlinear Loads in the Northeast USA. I. Voltage Distortion Forecast,” IEEE Transactions on Power Delivery, vol. 10, no. 1, pp. 340-7, January 1995.
83. EPRI PEAC Application #6, Avoiding Harmonic-Related Overload of Shared-Neutral Conductors, 1996.
84. EPRI PEAC Brief No. 21, The Effects of Neutral-to-Ground Voltage Differences on PC Performance, EPRI PEAC, Knoxville, TN, 1994.
85. EPRI PEAC Brief No. 25, The Effect of Lamp Dimmers on Light Flicker, EPRI PEAC, Knoxville, TN, 1995.
86. EPRI PEAC Brief No. 28, Input Performance of ASDs During Supply Voltage Unbalance, EPRI PEAC, Knoxville, TN, 1995.
87. EPRI PEAC Brief No. 36, Lamp Flicker Predicted by Gain-Factor Measurements, EPRI PEAC, Knoxville, TN, 1996.
88. EPRI PEAC Case Study No. 1, Light Flicker Caused By Resistive Spot Welder, EPRI PEAC, Knoxville, TN, 1997.
89. EPRI PEAC Solution No. 1, Equalizing Potential Differences, EPRI PEAC, Knoxville, TN, 1993.
90. EPRI TR-106294-V2, An Assessment of Distribution System Power Quality. Volume 2:Statistical Summary Report, Electric Power Research Institute, Palo Alto, CA, 1996.
91. Etezadi-Amoli, M. and Florence, T., “Voltage and Current Harmonic Content of a Utility System - A Summary of 1120 Test Measurements,” IEEE Transactions on Power Delivery, vol. 5, no. 3, pp. 1552-7, July 1990.
92. General Electric GET-1008L, “Distribution Data Book.”
93. Gorgette, F. A., Lachaume, J., and Grady, W. M., “Statistical Summation of the Harmonic Currents Produced by a Large Number of Single Phase Variable Speed Air Conditioners: a Study of Three Specific Designs,” IEEE Transactions on Power Delivery, vol. 15, no. 3, pp. 953-9, July 2000.
94. Govindarajan, S. N., Cox, M. D., and Berry, F. C., “Survey of Harmonic Levels on the Southwestern Electric Power Company System,” IEEE Transactions on Power Delivery, vol. 6, no. 4, pp. 1869-75, October 1991.
95. Greenwood, A., Electrical Transients in Power Systems, 2nd ed., Wiley Interscience, New York, 1991.
96. Gunther, E. W., “Interharmonics in Power Systems,” IEEE Power Engineering Society Summer Meeting, 2001.
97. Halpin, S. M., Bergeron, R., Blooming, T., Burch, R. F., Conrad, L. E., and Key, T., “Voltage and Lamp Flicker Issues: Should the IEEE Adopt the IEC Approach?" IEEE P1453 working group paper. Downloaded from http://www.manta. ieee.org/groups/1453/drpaper.html.
98. IEC 868, Flickermeter: Functional and Design Specifications, International Electrical Commission (IEC), 1986.
99. IEC 61000-3-7, Limitation of Voltage Fluctuation and Flicker for Equipments Connected to Medium and High Voltage Power Supply Systems, International Electrical Commission (IEC), 1995.
100. IEEE P519A draft 7, Guide for Applying Harmonic Limits on Power Systems, 2000.
101. IEEE Std. 141-1993, IEEE Recommended Practice for Electric Power Distribution for Industrial Plants.
102. IEEE Std. 142-1991, IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.
103. IEEE Std. 519-1992, IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems.
104. IEEE Std. 776-1992, IEEE Recommended Practice for Inductive Coordination of Electric Supply and Communication Lines.
105. IEEE Std. 1100-1999, IEEE Recommended Practice for Powering and Grounding Electronic Equipment.
106. IEEE Std. 1137-1991, IEEE Guide for the Implementation of Inductive Coordination Mitigation Techniques and Application.
107. IEEE Std. C57.110-1998, IEEE Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents.
108. IEEE Task Force, “The Effects of Power System Harmonics on Power System Equipment and Loads,” IEEE Transactions on Power Apparatus and Systems, vol. 104, no. 9, pp. 2555-63, September, 1985.
109. IEEE Task Force, “Effects of Harmonics on Equipment,” IEEE Transactions on Power Delivery, vol. 8, no. 2, pp. 672-80, April 1993.
110. IEEE Working Group, “Power Line Harmonic Effects on Communication Line Interference,” IEEE Transactions on Power Apparatus and Systems, vol. 104, no. 9, pp. 2578-87, September 1985.
111. Jatskevich, J., Wasynczuk, O., and Conrad, L., “A Method of Evaluating Flicker and Flicker-Reduction Strategies in Power Systems,” IEEE Transactions on Power Delivery, vol. 13, no. 4, pp. 1481-7, October 1998.
112. Jenner, M. and Brockhurst, F. C., “Vacuum Switched Capacitors to Reduce Induction Motor Caused Voltage Flicker on a 12.47 kV Rural Distribution Line,” IEEE Rural Electric Power Conference, 1990.
113. Kemerer, R. S. and Berkebile, L. E., “Directly Connected Static VAr Compensation in Distribution System Applications,” IEEE Rural Electric Power Conference, 1998.
114. Kolcio, N., Halladay, J. A., Allen, G. D., and Fromholtz, E. N., “Transient Overvoltages and Overcurrents on 12.47 kV Distribution Lines: Field Test Results,” IEEE Transactions on Power Delivery, vol. 7, no. 3, pp. 1359-70, July 1992.
115. Lat, M. V., Kundu, D., and Bonadie, G., “Overvoltage Protection Scheme for Series Capacitor Banks on High Voltage Distribution Systems,” IEEE Transactions on Power Delivery, vol. 5, no. 3, pp. 1459-65, July 1990.
116. Mansoor, A., Grady, W. M., Staats, P. T., Thallam, R. S., Doyle, M. T., and Samotyj, M. J., “Predicting the Net Harmonic Currents Produced by Large Numbers of Distributed Single-Phase Computer Loads,” IEEE Transactions on Power Delivery, vol. 10, no. 4, pp. 2001-6, October 1995.
117. Marshall, M. W., “Using Series Capacitors to Mitigate Voltage Flicker Problems,” IEEE Rural Electric Power Conference, 1997.
118. McGranaghan, M. F., Grebe, T. E., Hensley, G., Singh, T., and Samotyj, M., “Impact of Utility Switched Capacitors on Customer Systems. II. Adjustable-Speed Drive Concerns,” IEEE Transactions on Power Delivery, vol. 6, no. 4, pp. 1623-8, October 1991.
119. McGranaghan, M. F., Zavadil, R. M., Hensley, G., Singh, T., and Samotyj, M., “Impact of Utility Switched Capacitors on Customer Systems - Magnification at Low Voltage Capacitors,” IEEE Transactions on Power Delivery, vol. 7, no. 2, pp. 862-8, April 1992.
120. Miske, S. A., “Considerations for the Application of Series Capacitors to Radial Power Distribution Circuits,” IEEE Transactions on Power Delivery, vol. 16, no. 2, pp. 306-18, April 2001.
121. Morgan, L., Barcus, J. M., and Ihara, S., “Distribution Series Capacitor with High-Energy Varistor Protection,” IEEE Transactions on Power Delivery, vol. 8, no. 3, pp. 1413-19, July 1993.
122. Nejdawi, I. M., Emanuel, A. E., Pileggi, D. J., Corridori, M. J., and Archambeault, R. D., “Harmonics Trend in NE USA: A Preliminary Survey,” IEEE Transactions on Power Delivery, vol. 14, no. 4, pp. 1488-94, October 1999.
123. NEMA MG-1, Standard for Motors and Generators, 1998.
124. Pileggi, D. J., Gulachenski, E. M., Root, C. E., Gentile, T. J., and Emanuel, A. E., “The Effect of Modern Compact Fluorescent Lights on Voltage Distortion,” IEEE Transactions on Power Delivery, vol. 8, no. 3, pp. 1451-9, July 1993.
125. Rice, D. E., “Adjustable Speed Drive and Power Rectifier Harmonics - Their Effect on Power Systems Components,” IEEE Transactions on Industry Applications, vol. 22, no. 1, pp. 161-77, January/February 1986.
126. Sabin, D. D., Brooks, D. L., and Sundaram, A., “Indices for Assessing Harmonic Distortion from Power Quality Measurements: Definitions and Benchmark Data,” IEEE Transactions on Power Delivery, vol. 14, no. 2, pp. 489-96, April 1999a.
127. Sabin, D. D., Grebe, T. E., and Sundaram, A., “Assessing Distribution System Transient Overvoltages Due to Capacitor Switching,” International Conference on Power Systems Transients, Technical University of Budapest, Budapest, Hungary, 1999b.
128. Schultz, A. J., Johnson, J. B., and Schultz, N. R., “Magnification of Switching Surges,” AIEE Transactions on Power Apparatus and Systems, pp. 1418-26, February 1959.
129. Seebald, R. C., Buch, J. F., and Ward, D. J., “Flicker Limitations of Electric Utilities,” IEEE Transactions on Power Apparatus and Systems, vol. 104, no. 9, pp. 2627-31, September 1985.
130. Shankland, L. A., Feltes, J. W., and Burke, J. J., “The Effect of Switching Surges on 34.5 kV System Design and Equipment,” IEEE Transactions on Power Delivery, vol. 5, no. 2, pp. 1106-12, April 1990.
131. Tang, L., Mueller, D., Hall, D., Samotyj, M., and Randolph, J., “Analysis of DC Arc Furnace Operation and Flicker Caused by 187 Hz Voltage Distortion,” IEEE Transactions on Power Delivery, vol. 9, no. 2, pp. 1098-107, April 1994.
132. Thallam, R. S., Grady, W. M., and Samotyj, M. J., “Estimating Future Harmonic Distortion Levels In Distribution Systems Due To Single-Phase Adjustable-Speed-Drive Air Conditioners: A Case Study,” ICHPS V International Conference on Harmonics in Power Systems, 1992.
133. Troedsson, C. G., Gramlich, E. F., Gustin, R. F., and McGranaghan, M. F., “Magnification of Switching Surges as a Result of Capacitor Switching on a 34.5 kV Distribution System,” Proceedings of the American Power Conference, 1983.
134. UIEPQ-9715, Guide to Quality of Electrical Supply for Industrial Installation - Part 4:Voltage Unbalance, Union Internationale de Electrothermie (UIE), 1996.
135. UIEPQ-9715, Guide to Quality of Electrical Supply in Industrial Installations - Part 5:Flicker and Voltage Fluctuations, Union Internationale de Electrothermie (UIE), 1999.
136. Walker, M. K., “Electric Utility Flicker Limitations,” IEEE Transactions on Industry Applications, vol. 15, no. 6, pp. 644-55, November/December 1979.
137. Walling, R. A., Melchior, R. D., and McDermott, B. A., “Measurement of Cable Switching Transients in Underground Distribution Systems,” IEEE Transactions on Power Delivery, vol. 10, no. 1, pp. 534-9, January 1995.
138. Willis, H. L., Power Distribution Planning Reference Book, Marcel Dekker, New York, 1997.
139. Wong, W. K., Osborn, D. L., and McAvoy, J. L., “Application of Compact Static VAR Compensators to Distribution Systems,” IEEE Transactions on Power Delivery, vol. 5, no. 2, pp. 1113-20, April 1990.
140. ABB, Distribution Transformer Guide, 1995.
141. Ackermann, R. H. and Baker, P., “Performance of Distribution Lines in Severe Lightning Areas,” International Conference on Lightning and Power Systems, London, U.K., June 1984.
142. ANSI/IEEE C62.11-1987, IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits, American National Standards Institute, Institute of Electrical and Electronics Engineers, Inc.
143. ANSI/IEEE Std. 100-1992, Standard Dictionary of Electrical and Electronics Terms.
144. ASTM F1506-94, Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards, American Society for Testing and Materials, 1994.
145. Barkan, P., Damsky, B. L., Ettlinger, L. F., and Kotski, E. J., “Overpressure Phenomena in Distribution Transformers with Low Impedance Faults Experiment and Theory,” IEEE Transactions on Power Apparatus and Systems, vol. 95, no. 1, pp. 37-48, 1976.
146. Benton, R. E., “Energy Absorption Capabilities of Pad Mounted Distribution Transformers with Internal Faults,” IEEE/PES Transmission and Distribution Conference, 1979.
147. Bernis, R. A. O. and de Minas Gerais, C. E., “CEMIG Addresses Urban Dilemma,” Transmission and Distribution World, vol. 53, no. 3, pp. 56-61, March 2001.
148. Burke, J. J. and Lawrence, D. J., “Characteristics of Fault Currents on Distribution Systems,” IEEE Transactions on Power Apparatus and Systems, vol. 103, no. 1, pp. 1-6, January 1984.
149. CEA 149 D 491A, Distribution Transformer Internal Pressure Withstand Test, Canadian Electrical Association, 1997. As cited by Cuk (2001).
150. CEA 160 D 597, Effect of Lightning on the Operating Reliability of Distribution Systems, Canadian Electrical Association, Montreal, Quebec, 1998.
151. Cobine, J. D., Gaseous Conductors, McGraw-Hill, New York, 1941.
152. Cuk, N., “Seminar on Detection of Internal Arcing Faults in Distribution Transformers,” Presentation at the IEEE Transformers Committee Meeting, Orlando, Florida, October 14-17, 2001.
153. Drouet, M. G. and Nadeau, F., “Pressure Waves Due to Arcing Faults in a Substation,” IEEE Transactions on Power Apparatus and Systems, vol. 98, no. 5, pp. 1632-5, 1979.
154. EPRI 1209-1, Distribution Fault Current Analysis, Electric Power Research Institute, Palo Alto, CA, 1983.
155. EPRI EL-6903, Study of Fault-Current-Limiting Techniques, Electric Power Research Institute, Palo Alto, CA, 1990.
156. EPRI TE-114915, Mitigation of Animal-Caused Outages for Distribution Lines and Substations, Electric Power Research Institute, Palo Alto, CA, 1999.
157. EPRI TR-106294-V2, An Assessment of Distribution System Power Quality. Volume 2:Statistical Summary Report, Electric Power Research Institute, Palo Alto, CA, 1996.
158. EPRI TR-106294-V3, An Assessment of Distribution System Power Quality. Volume 3:Library of Distribution System Power Quality Monitoring Case Studies, Electric Power Research Institute, Palo Alto, CA, 1996.
159. EPRI TR-109178, Distribution Cost Structure - Methodology and Generic Data, Electric Power Research Institute, Palo Alto, CA, 1998.
160. Finch, K., “Understanding Tree Outages,” EEI Vegetation Managers Meeting, Palm Springs, CA, May 1, 2001.
161. Frazier, S. D. and Bonham, C., “Suggested Practices for Reducing Animal-Caused Outages,” IEEE Industry Applications Magazine, vol. 2, no. 4, pp. 25-31, August 1996.
162. Girgis, A. A., Fallon, C. M., and Lubkeman, D. L., “A Fault Location Technique for Rural Distribution Feeders,” IEEE Transactions on Industry Applications, vol. 29, no. 6, pp. 1170-5, November/December 1993.
163. Goda, Y., Iwata, M., Ikeda, K., and Tanaka, S., “Arc Voltage Characteristics of High Current Fault Arcs in Long Gaps,” IEEE Transactions on Power Delivery, vol. 15, no. 2, pp. 791-5, April 2000.
164. Goedde, G. L., Kojovic, L. A., and Knabe, E. S., “Overvoltage Protection for Distribution and Low-Voltage Equipment Experiencing Sustained Overvoltages,” Electric Council of New England (ECNE) Fall Engineering Conference, Killington, VT, 2002.
165. Goodfellow, J., “Understanding the Way Trees Cause Outages,” 2000. http:// www.eci-consulting.com/images/wnew/trees.pdf.
166. Goodman, E. A. and Zupon, L., “Static Pressures Developed in Distribution Transformers Due to Internal Arcing Under Oil,” IEEE Transactions on Power Apparatus and Systems, vol. 95, no. 5, pp. 1689-98, 1976.
167. Hart, B., “HV Overhead Line - the Scandinavian Experience,” Power Engineering Journal, pp. 119-23, June 1994.
168. Hendrix, “Reliability of Overhead Distribution Circuits,” Hendrix Wire & Cable, Inc., August 1998.
169. Henning, W. R., Hernandez, A. D., and Lien, W. W., “Fault Current Capability of Distribution Transformers with Under-Oil Arresters,” IEEE Transactions on Power Delivery, vol. 4, no. 1, pp. 405-12, January 1989.
170. Horton, W. F., Golberg, S., and Volkmann, C. A., “The Failure Rates of Overhead Distribution System Components,” IEEE Power Engineering Society Transmission and Distribution Conference, 1991. IEEE C2-1997, National Electrical Safety Code.
171. IEEE Std. 493-1997, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book).
172. IEEE Std. 1024-1988, IEEE Recommended Practice for Specifying Distribution Composite Insulators (Suspension Type).
173. IEEE Tutorial Course 90EH0310-3-PWR, “Detection of Downed Conductors on Utility Distribution Systems,” 1990.
174. IEEE Working Group on Distribution Protection, “Distribution Line Protection Practices Industry Survey Results,” IEEE Transactions on Power Delivery, vol. 10, no. 1, pp. 176-86, January 1995.
175. Johnston, L., Tweed, N. B., Ward, D. J., and Burke, J. J., “An Analysis of Vepco’s 34.5 kV Distribution Feeder Faults as Related to Through Fault Failures of Substation Transformers,” IEEE Transactions on Power Apparatus and Systems, vol. 97, no. 5, pp. 1876-84, 1978.
176. Kaufmann, G. H., “Impulse Testing of Distribution Transformers Under Load,” IEEE Transactions on Power Apparatus and Systems, vol. 96, no. 5, pp. 1583-95, September/October 1977.
177. Kaufmann, G. H. and McMillen, C. J., “Gas Bubble Studies and Impulse Tests on Distribution Transformers During Loading Above Nameplate Rating,” IEEE Transactions on Power Apparatus and Systems, vol. 102, no. 8, pp. 2531-42, August 1983.
178. Kersting, W. H. and Phillips, W. H., “Modeling and Analysis of Unsymmetrical Transformer Banks Serving Unbalanced Loads,” IEEE Transactions on Industry Applications, vol. 32, no. 3, pp. 720-5, May-June 1996.
179. Kuntz, P. A., “Optimal Reliability Centered Vegetation Maintenance Scheduling in Electric Power Distribution Systems,” Ph.D. thesis, University of Washington, 1999. As cited by Brown, R. E., Electric Power Distribution Reliability, Marcel Dekker, 2002.
180. Lampley, G. C., “Fault Detection and Location on Electrical Distribution System Case Study,” IEEE Rural Electric Power Conference, 2002.
181. Lasseter, J. A., “Burndown Tests on Bare Conductor,” Electric Light & Power, pp. 94-100, December 1956.
182. Lasseter, J. A., “Point Way to Reduce Lightning Outages,” Electrical World, pp. 93-5, October 1965.
183. Laverick, D. G., “Performance of the Manweb Rural 11-kV Network During Lightning Activity,” International Conference on Lightning and Power Systems, London, June 1984.
184. Littler, G. E., “High Speed Reclosing and Protection Techniques Applied to Wood Pole Lines,” Elec. Eng. Trans., Inst. Eng. Aust., vol. EE1, pp. 107-16, June 1965.
185. Lunsford, J. M. and Tobin, T. J., “Detection of and Protection for Internal Low-Current Winding Faults in Overhead Distribution Transformers,” IEEE Transactions on Power Delivery, vol. 12, no. 3, pp. 1241-9, July 1997.
186. Mahieu, W. R., “Prevention of High-fault Rupture of Pole-Type Distribution Transformers,” IEEE Transactions on Power Apparatus and Systems, vol. 94, no. 5, pp. 1698-707, 1975.
187. Mazurek, B., Maczka, T., and Gmitrzak, A., “Effect of Arc Current on Properties of Composite Insulators for Overhead Lines,” Proceedings of the 6th International Conference on Properties and Applications of Dielectric Materials, June 2000.
188. Mo, Y. C. and Taylor, L. S., “A Novel Approach for Distribution Fault Analysis,” IEEE Transactions on Power Delivery, vol. 8, no. 4, pp. 1882-9, October 1993.
189. Mo, Y. C. and Taylor, L. S., “Analysis and Prevention of Animal-Caused Faults in Power Distribution Systems,” IEEE Transactions on Power Delivery, vol. 10, no. 2, pp. 995-1001, April 1995.
190. NFPA 70E-2000, Standard for Electrical Safety Requirements for Employee Workplaces, National Fire Protection Association.
191. Parrish, D. E., “Lightning-Caused Distribution Circuit Breaker Operations,” IEEE Transactions on Power Delivery, vol. 6, no. 4, pp. 1395-401, October 1991.
192. Peele, S., “Faults Per Feeder Mile,” PQA Conference 2001.
193. PTI, “Distribution Transformer Application Course Notes,” Power Technologies, Inc., Schenectady, NY, 1999.
194. Rizk, F. A. and Nguyen, D. H., “AC Source-Insulator Interaction in HV Pollution Tests,” IEEE Transactions on Power Apparatus and Systems, vol. 103, no. 4, pp. 723-32, April 1984.
195. Santoso, S., Dugan, R. C., Lamoree, J., and Sundaram, A., “Distance Estimation Technique for Single Line-to-Ground Faults in a Radial Distribution System,” IEEE Power Engineering Society Winter Meeting, 2000.
196. Schweitzer, E. O., “A Review of Impedance-Based Fault Locating Experience,” Fourteenth annual Iowa-Nebraska system protection seminar, Omaha, NE, October 16, 1990. Downloaded from www.schweitzer.com.
197. Short, T. A., “Distribution Fault Rate Survey,” EPRI PEAC, 2001.
198. Simpson, P., “EUA’s Dual Approach Reduces Tree-Caused Outages,” Transmission & Distribution World, pp. 22-8, August 1997.
199. Slepian, J., “Extinction of a Long AC Arc,” AIEE Transactions, vol. 49, pp. 421-30, April 1930.
200. Smith, D. R., “System Considerations - Impedance and Fault Current Calculations,” IEEE Tutorial Course on Application and Coordination of Reclosers, Sectionalizers, and Fuses, 1980. Publication 80 EHO157-8-PWR.
201. St. Pierre, C., A Practical Guide to Short-Circuit Calculations, Electric Power Consultants, Schenectady, NY, 2001.
202. Strom, A. P., “Long 60-Cycle Arcs in Air,” AIEE Transactions, vol. 65, pp. 113-8, March 1946.
203. Taylor, L., “Elimination of Faults on Overhead Distribution Systems,” IEEE/PES Winter Power Meeting, 1995. Presentation to the Working Group on System Design, 1995 IEEE Winter Power Meeting, New York, NY.
204. Williams, C., “Tree Fault Testing on a 12 kV Distribution System,” IEEE/PES Winter Power Meeting presentation to the Distribution Subcommittee, 1999.
205. Blackburn, J.L., Protective Relaying: Principles and Applications, Marcel Dekker, New York, 1987.
206. California Energy Commission, Reducing wildlife interactions with electrical distribution facilities, 1999.
207. Chow, M.Y. and Taylor, L.S., A novel approach for distribution fault analysis, IEEE Trans. Power Delivery, 8(4), 1882-1889, October 1993.
208. Chow, M.Y. and Taylor, L.S., Analysis and prevention of animal-caused faults in power distribution systems, IEEE Trans. Power Delivery, 10(2), 995-1001, April 1995.
209. Darveniza, M., Mercer, D.R., and Watson, R.M., An assessment of the reliability of in-service gapped silicon-carbide distribution surge arresters, IEEE Trans. Power Delivery, 11(4), 1789-1797, October 1996.
210. Dugan, R.C., Ray, L.A., Sabin, D.D., Baker, G., Gilker, C., and Sundaram, A., Impact of fast tripping of utility breakers on industrial load interruptions, IEEE Ind. Appl. Mag., 2(3), 55-64, May-June 1996.
211. EPRI 1001665, Power Quality Improvement Methodology for Wires Companies, Electric Power Research Institute, Palo Alto, CA, 2003.
212. EPRI 1008480, Electric distribution hazard tree risk reduction strategies, Electric Power Research Institute, Palo Alto, CA, 2004.
213. EPRI 1008506, Power quality implications of transmission and distribution construction:tree faults and equipment issues, Electric Power Research Institute, Palo Alto, CA, 2005.
214. EPRI TE-114915, Mitigation of animal-caused outages for distribution lines and substations, Electric Power Research Institute, Palo Alto, California, 1999.
215. EPRI TR-100218, Characteristics of lightning surges on distribution lines. Second phase - final report, Electric Power Research Institute, Palo Alto, California, 1991.
216. Finch, K., Understanding tree outages, EEI Vegetation Managers’ Meeting, Palm Springs, CA, May, 1 2001.
217. Finch, K., Understanding line clearance and tree-caused outages, EEI Natural Resources Workshop, April 1, 2003a.
218. Finch, K.E., Tree caused outages - understanding the electrical fault pathway, EEI Fall 2003 Transmission, Distribution and Metering Conference, Jersey City, NJ, 2003b.
219. General Electric Co. (task force of eight utility companies and the General Electric Company), Investigation and evaluation of lightning protective methods for distribution circuit. I. Model study and analysis, IEEE Trans. Power Appar. Syst., 88(8), 1232-1238, August 1969a.
220. General Electric Co. (task force of eight utility companies and the General Electric Company), Investigation and evaluation of lightning protective methods for distribution circuits. II. Application and evaluation, IEEE Trans. Power Appar. Syst., 88(8), 1239-1247, August 1969b.
221. Guggenmoos, S., Effects of tree mortality on power line security, J. Arboriculture, 29(4), 181-196, July 2003.
222. Hamilton, J.C., Johnson, R.J., Case, R.M., and Riley, M.W., Assessment of squirrelcaused power outages, in Vertebrate Pest Control and Management Materials, K.A. Fagerstone and R.D. Curnow, Eds., Philadelphia, PA, American Society for Testing and Materials, 1989, 34-40. ASTM STP 1055.
223. IEEE Working Group on Distribution Protection, Distribution line protection practices industry survey results, IEEE Trans. Power Delivery, 10(1), 176-186, January 1995.
224. Johnston, L., Tweed, N.B., Ward, D.J., and Burke, J.J., An analysis of Vepco’s 34.5-kV distribution feeder faults as related to through fault failures of substation transformers, IEEE Trans. Power Appar. Syst., 97(5), 1876-1884, 1978.
225. Kaempffer, F. and Wong, P.S., Design modifications lessen outage threat, Transmission Distribution World, October 1, 1996.
226. Lat, M.V. and Kortschinski, J., Distribution arrester research, IEEE Trans. Power Appar. Syst., 100(7), 3496-3505, July 1981.
227. McDaniel, J., Line arrester application field study, IEEE/PES Transmission and Distribution Conference and Exposition, 2001.
228. McDermott, T.E., Short, T.A., and Anderson, J.G., Lightning protection of distribution lines, IEEE Trans. Power Delivery, 9(1), 138-152, January 1994.
229. Parrish, D.E., Lightning-caused distribution circuit breaker operations, IEEE Trans. Power Delivery, 6(4), 1395-1401, October 1991.
230. Puget Sound Energy, TreeWatch Program Annual Report, 2003. http://www.wutc.wa.gov/rms2.nsf/0/e25e1114a94abbf788256dd50082d992?Open-Document.
231. Short, T.A., Fuse saving and its effect on power quality, in EEI Distribution Committee Meeting, 1999.
232. Short, T.A., Electric Power Distribution Handbook, CRC Press, Boca Raton, FL, 2004.
233. Short, T.A. and Ammon, R.A., Instantaneous trip relay: examining its role, Transmission Distribution World, 49(2), 1997.
234. Short, T.A. and Ammon, R.H., Monitoring results of the effectiveness of surge arrester spacings on distribution line protection, IEEE Trans. Power Delivery, 14(3), 1142-1150, July 1999.
235. Simpson, P., EUA’s dual approach reduces tree-caused outages, Transmission Distribution World, 22-18, August 1997.
236. Simpson, P. and Van Bossuyt, R., Tree-caused electric outages, J. Arboriculture, May 1996.
237. Taylor, L., The illusion of knowledge, Southeastern Electric Exchange Power Quality and Reliability Committee, Dallas, TX, 2003.
238. Tyner, J.T., Getting to the bottom of UG practices, Transmission Distribution World, 50(7), 44-56, July 1998.
239. Westinghouse Electric Corporation, Applied protective relaying, 2004.
240. Xu, L., Chow, M.-Y., and Taylor, L.S., Analysis of tree-caused faults in power distribution systems, 35th North American Power Symposium, University of Missouri-Rolla, October 20-21, 2003.
241. Yu, P., Wong, P.S., and Kaempffer, F., Tension of conductor under concentrated loads, J.Appl. Mech., 62, 802-809, September 1995.
242. Zocholl, S.E., AC motor protection, Schweitzer Engineering Laboratories, 2003.