Heat exchangers: Selection, rating, and thermal design, second edition

Heat Exchangers: Selection, Rating, and Thermal Design, Second Edition

Volumn , Issue , 2002, Pages 1-493

  Kakaç, Sadik ^a   Liu, Hongtan ^a  

^a UNIVERSITY OF MIAMI   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056552935     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (284)

1. Hewitt, G. F., Shires, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, Florida, 1994.
2. Shah, R. K., Classification of heat exchangers, in Heat Exchangers — Thermo-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., John Wiley & Sons, New York, 1981.
3. Lin, Z. H., Thermohydraulic design of fossil-fuel boiler components, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991.
4. Butterworth, D., Steam power plant and process condensers, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991.
5. Butterworth, D., Condensers and their design, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
6. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., New York, 1988.
7. Alfa Laval, Heat Exchanger Guide, S. 22101, Lund 1, Sweden, 1980.
8. HTFS Plate-Fin Study Group, Plate-Fin Heat Exchangers — Guide to Their Specifications and Use, Taylor, M. A., Ed., HTFS, Oxfordshire, U.K., 1987.
9. Pate, M. B., Evaporators and condensers for refrigeration and air-conditioning systems, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991.
10. Pate, M. B., Design considerations for air-conditioning evaporators and condenser coils, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
11. Collier, J. G., Evaporators, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
12. American Petroleum Institute, Air Cooled Heat Exchangers for General Refinery Service, API Standard 661, Washington, D.C., 1986.
13. Mayinger, F., Classification and applications of two-phase flow heat exchangers, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds, Kluwer Publishers, The Netherlands, 1988.
14. Kitto, J. B., Jr. and Albrecht, M. J., Fossil-fuel-fired boilers: fundamentals and elements, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991.
15. Stultz, S. C. and Kitto, J. B., Steam, its Generation and Use, Babcock and Wilcox, New York, 1992.
16. Sclünder, E. U. et al., Eds., Heat Exchanger Design Handbook, Hemisphere, Washington, D.C., 1988.
17. Smith, R. A., Vaporizers — Selection, Design and Operation, John Wiley & Sons, New York, 1986.
18. Bell, K. J., Preliminary design of shell and tube heat exchangers, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, D.C., 1981.
19. Shah, R. K., Classification of heat exchangers, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, D.C., 1981, 9.
20. Chenoweth, J. M. and Impagliazzo, M., Eds., Fouling in Hot Exchange Equipment, ASME Symposium, Volume HTD-17, ASME, New York, 1981.
21. Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Low Reynolds Number Flow Heat Exchangers, Hemisphere, Washington, D.C., 1981, 21.
22. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single Phase Convective Heat Transfer, John Wiley & Sons, New York, 1987, Ch. 4, 18.
23. Kern, D. Q. and Kraus, A. D., Extended Surface Heat Transfer, McGraw-Hill, New York, 1972.
24. Padet, J., Echangeurs Thermiques, Masson, Paris, France, 1994.
25. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., New York, 1988.
26. Bowman, R. A., Mueller, A. C., and Nagle, W. M., Mean temperature difference in design, Trans. ASME, 62, 283, 1940.
27. Kays, W. M. and London, A. L., Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York, 1984.
28. Shah, R. K. and Mueller, A. C., Heat exchangers, in Handbook of Heat Transfer Applications, Rohsenow, W. M., Hartnett, J. P., and Gani, E. N., Eds., McGraw-Hill, New York, 1985, Ch. 4.
29. Kays, W. M., London, A. L., and Johnson, K. W., Gas Turbine Plant Heat Exchangers, ASME, New York, 1951.
30. Walker, G., Industrial Heat Exchanger. A Basic Guide. Hemisphere, Washington, D.C., 1990.
31. Butterworth, D., Condensers: thermohydraulic design, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, D.C., 1981, 547.
32. Colburn, A. P., Mean temperature difference and heat transfer coefficient in liquid heat exchangers, Ind. Eng. Chem., 25, 873, 1933.
33. Shah, R. K., Heat exchanger design methodology — an overview, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, D.C., 1981, 455.
34. Bell, K. J., Overall design methodology for shell-and-tube exchangers, in Heat Transfer Equipment Design, Shah, R. K., Subbarao, E. C., and Mashelkar, R. A., Eds., Hemisphere, Washington, D.C., 1988, 131.
35. Shah, R. K. and London, A. L., Laminar Forced Convection in Ducts, Academic Press, New York, 1978.
36. Shah, R. K. and Bhatti, M. S., Laminar convective heat transfer in ducts, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W. Eds., John Wiley & Sons, New York, 1987, ch. 3.
37. Gnielinski, V., Forced convection ducts, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1983, 2.5.1–2.5.3.
38. Hausen, H., Neue Gleichungen für die Warmeübertragung bei freier oder erzwungener Strömung, Allg. Wärmetech., 9, 75, 1959.
39. Kakaç, S., Laminar forced convection in the combined entrance region of ducts, in Natural Convection: Fundamentals and Applications, Kakaç, S., Aung, W., and Viskanta, R., Eds., Hemisphere, Washington, D.C., 1985, 165.
40. Pohlhausen, E., Der Wärmeaustausch Zwischen festen Körpern und Flüssigkeiten mit Kleiner Reibung und Kleiner Wärmeleitung, Z. Angew. Math. Mech., 1, 115, 1921.
41. Delorenzo, B. and Anderson, E. D., Heat transfer and pressure drop of liquids in double pipe fintube exchangers, Trans. ASME, 67, 697, 1945.
42. Stephan, K., Warmeübergang und Druckabfall bei nichtausgebildeter Laminar Stömung in Rohren und ebenen Spalten, Chem. Ing. Tech., 31, 773, 1959.
43. Deissler, R. G., Analytical investigation of fully developed laminar flow in tubes with heat transfer with fluid properties variable along the radius, NACA TN 2410, 1951.
44. Yang, K. T., Laminar forced convection of liquids in tubes with variable viscosity, J. Heat Transfer, 84, 353, 1962.
45. Sieder, E. N. and Tate, G. E., Heat transfer and pressure drop of liquids in tubes, Ind. Eng. Chem., 28, 1429, 1936.
46. Whitaker, S., Forced convection heat-transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and flow in packed beds and tube bundles, AIChE J., 18, 361, 1972.
47. Oskay, R. and Kakaç, S., Effect of viscosity variations on turbulent and laminar forced convection in pipes, METU J. Pure Appl. Sci., 6, 211, 1973.
48. Kuzneltsova, V. V., Convective heat transfer with flow of a viscous liquid in a horizontal tube (in Russian), Teploenergetika, 19(5), 84, 1972.
49. Test, F. L., Laminar flow heat transfer and fluid flow for liquids with a temperature dependent viscosity, J. Heat Transfer, 90, 385, 1968.
50. Worsøe-Schmidt, P. M., Heat transfer and friction for laminar flow of helium and carbon dioxide in a circular tube at high heating rate, Int. J. Heat Mass Transfer, 9, 1291, 1966.
51. Bhatti, M. S. and Shah, R. K., Turbulent forced convection in ducts, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W. Eds., John Wiley & Sons, New York, 1987, ch. 4.
52. Petukhov, B. S. and Popov, V. N., Theoretical calculation of heat exchanger and frictional resistance in turbulent flow in tubes of incompressible fluid with variable physical properties, High Temp., 1(1), 69, 1963.
53. Petukhov, B. S., Heat transfer and friction in turbulent pipe flow with variable physical properties, in Advances in Heat Transfer, Vol. 6, Hartnett, J. P. and Irvine, T. V., Eds., Academic Press, New York, 1970, 504.
54. Webb, R. I., A critical evaluation of analytical solutions and Reynolds analogy equations for heat and mass transfer in smooth tubes, Wärme und Stoffübertragung, 4, 197, 1971.
55. Sleicher, C. A. and Rouse, M. W., A convenient correlation for heat transfer to constant and variable property fluids in turbulent pipe flow, Int. J. Heat Mass Transfer, 18, 677, 1975.
56. Gnielinski, V., New equations for heat and mass transfer in turbulent pipe and channel flow, Int. Chem. Eng., 16, 359, 1976.
57. Kays, W. M. and Crawford, M. E., Convective Heat and Mass Transfer, 2nd ed., McGraw-Hill, New York, 1981.
58. Kakaç, S. and Yener, Y., Convective Heat Transfer, 2nd ed., CRC Press, Boca Raton, FL, 1994.
59. McAdams, W. H., Heat Transmission, 3rd ed., McGraw-Hill, New York, 1954.
60. Kakaç, S., The effects of temperature-dependent fluid properties on convective heat transfer, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 18.
61. Hausen, H., Darstellung des Warmeüberganges in Rohren durch verallgemein-erte Potenzbeziehungen, Z. Ver. Dtsch. Ing. Beigeft Verfahrenstech., 4, 91, 1943.
62. Rehme, K., A simple method of predicting friction factors of turbulent flow in noncircular channels, Int. J. Heat Mass Transfer, 16, 933, 1973.
63. Malak, J., Hejna, J., and Schmid, J., Pressure losses and heat transfer in noncircular channels with hydraulically smooth walls, Int. J. Heat Mass Transfer, 18, 139, 1975.
64. Brundrett, E., Modified hydraulic diameter, in Turbulent Forced Convection in Channels and Bundles, Vol. 1, Kakaç, S. and Spalding, D. B., Eds., Hemisphere, Washington, D.C., 1979, 361.
65. Perkins, H. C. and Worsøe-Schmidt, P., Turbulent heat and momentum transfer for gases in a circular tube at wall to bulk temperature ratios to seven, Int. J. Heat Mass Transfer, 8, 1011, 1965.
66. McElligot, D. M., Magee, P. M., and Leppert, G., Effect of large temperature gradients on convective heat transfer: the downstream region, J. Heat Transfer, 87, 67, 1965.
67. Colburn, A. P., A method of correlating forced convection heat transfer data and comparison with fluid friction, Trans. AIChE, 29, 174, 1933.
68. Hufschmidt, W., Burck, E., and Riebold, W., Die Bestimmung örtlicher und Warmeübergangs-Zahlen in Rohren bei Hohen Warmestromdichten, Int. J. Heat Mass Transfer, 9, 539, 1966.
69. Rogers, D. G., Forced convection heat transfer in single phase flow of a Newtonian fluid in a circular pipe, CSIR Report CENG 322, Pretoria, South Africa, 1980.
70. Hausen, H., Extended equation for heat transfer in tubes at turbulent flow, Wärme und Stoübertragung, 7, 222, 1974.
71. Humble, L. V., Lowdermilk, W. H., and Desmon, L. G., Measurement of average heat transfer and friction coefficients for subsonic flow of air in smooth tubes at high surface and fluid temperature, NACA Report 1020, 1951.
72. Barnes, J. F. and Jackson, J. D., Heat transfer to air, carbon dioxide and helium flowing through smooth circular tubes under conditions of large surface/gas temperature ratio, J. Mech. Eng. Sci., 3(4), 303, 1961.
73. Dalle-Donne, M. and Bowditch, P. W., Experimental local heat transfer and friction coefficients for subsonic laminar transitional and turbulent flow of air or helium in a tube at high temperatures, Dragon Project Report 184, Winfirth, Dorchester, Dorset, U.K., 1963.
74. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York, 1987.
75. Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Two-Phase Flow Heat Exchangers, Kluwer Publishers, The Netherlands, 1988.
76. Zukauskas, A. A., Convective heat transfer in cross flow, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 6.
77. Shah, R. K. and Joshi, S. D., Convective heat transfer in curved pipes, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 5.
78. Mori, Y. and Nakayoma, W., Study on forced convective heat transfer in curved pipes (3rd Report, Theoretical Analysis under the Condition of Uniform Wall Temperature and Practical Formulae), Int. J. Heat Mass Transfer, 10, 1426, 1967.
79. Akiyama, M. and Cheng, K. C., Laminar forced convection heat transfer in curved pipes with uniform wall temperature, Int. J. Heat Mass Transfer, 15, 1426, 1972.
80. Manlapaz, R. L. and Churchill, S. W., Fully developed laminar convection from a helical coil, Chem. Eng. Commun., 9, 185, 1981.
81. Kubair, V. and Kuloor, N. R., Heat transfer to Newtonian fluids in coiled pipes in laminar flow, Int. J. Heat Mass Transfer, 9, 63, 1966.
82. Kubair, V. and Kuloor, N. R., Heat transfer to Newtonian fluids in spiral coils at constant tube wall temperature in laminar flow, Indian J. Technol., 3, 144, 1965.
83. Pratt, N. H., The heat transfer in a reaction tank cooled by means of a coil, Trans. Inst. Chem. Eng., 25, 163, 1947.
84. Orlov, V. K. and Tselishchev, P. A., Heat exchange in a spiral coil with turbulent flow of water, Thermal Eng., 11(12), 97, 1964.
85. Shah, R. K. and Joshi, S. D., Convective heat transfer in bends and fittings, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 10.
86. Ede, A. J., The effect of a right-angled bend on heat transfer in a pipe, Int. Dev. Heat Transfer, 634, 1962.
87. Tailby, S. R. and Staddon, P. W., The influence of 90° and 180° pipe bends on heat transfer from an internally flowing gas stream, Heat Transfer, Vol. 2, Paper No. FC4.5, 1970.
88. Moshfeghian, M. and Bell, K. J., Local heat transfer measurements in and downstream from a U-bend, ASME Paper No. 79-HT-82, 1979.
89. Moody, L. F., Friction factor for pipe flow, Trans. ASME, 66, 671, 1994.
90. Brundrett, E., Modified hydraulic diameter for turbulent flow, in Turbulent Forced Convection in Channels and Bundles, Vol. 1, Kakaç, S. and Spalding, D. B., Eds., Hemisphere, Washington, D.C., 1979, 361.
91. Rohsenow, W. M., Heat exchangers — basic methods, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, D.C., 1981, 429–459.
92. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York, 1987, ch. 4 and 8.
93. Kern, D. Q., Process Heat Transfer, McGraw-Hill, New York, 1950.
94. Moran, J. M. and Shapiro, N. H., Fundamentals of Engineering Thermodynamics, 3rd ed., John Wiley & Sons, New York, 1995.
95. Zukauskas, A., Convective heat transfer in cross flow, in Handbook of Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 6.
96. Zukauskas, A. and Uliniskas, R., Banks of plane and finned tubes, in Heat Exchanger Design Handbook, Vol. 2, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1983, 2.5.3.1.
97. Gaddis, E. S. and Gnielinski, V., Pressure drop in cross flow across tube bundles, Int. J. Eng., 25(1), 1, 1985.
98. Shah, R. K. and Joshi, S. D., Convective heat transfer in curved ducts, in Handbook of Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 5 and 10.
99. Srinivasan, P. S., Nandapurkar, S. S., and Holland, F. A., Friction for coils. Trans. Inst. Chem. Eng., 48, T156, 1970.
100. Manlapaz, R. L. and Churchill, S. W., Fully developed laminar flow in a helically coiled tube of finite pitch, Chem. Eng. Commun., 7, 557, 1980.
101. Kubair, V. and Kuloor, N. R., Non-isothermal pressure drop data for liquid flow in helical coils, Indian J. Technol., 3, 5, 1965.
102. Kubair, V. and Kuloor, N. R., Flow of Newtonian fluids in Archimedean spiral tube coils, Indian J. Technol., 4, 3, 1966.
103. Kubair, V. and Kuloor, N. R., Non-isothermal pressure drop data for spiral tube coils, Indian J. Technol., 3, 382, 1965.
104. Kubair, V. and Kuloor, N.R., Heat transfer for Newtonian fluids in coiled pipes in laminar flow, Int. J. Heat Transfer, 9, 63, 1966.
105. Ito, H., Friction factors for turbulent flow in curved pipes, J. Basic Eng., 81, 123, 1959.
106. Boyce, B. E., Collier, J. G., and Levy, J., Eds., Hole-up and pressure drop measurements in the two-phase flow of air-water mixtures in helical coils, in Co-current Gas Liquid Flow, Plenum Press, U.K., 1969, 203.
107. Rogers, G. F. C. and Mayhew, Y. R., Heat transfer and pressure loss in helically coiled tubes with turbulent flow, Int. J. Heat Mass Transfer, 7, 1207, 1964.
108. Ito, H., Pressure losses in smooth bends, J. Basic Eng., 82, 131, 1960.
109. Idelchik, I. E., Handbook of Hydraulic Resistance, 2nd ed., Hemisphere, Washington, D.C., 1986.
110. Powle, U. S., Energy losses in smooth bends, Mech. Eng. Bull. (India), 12(4), 104, 1981.
111. Perry, R. N. and Chilton, C. H., Chemical Engineers’ Handbook, 5th ed., McGraw-Hill, New York, 1973.
112. Hooper, W. B., The two-K method predicts head losses in pipe fittings, Chem. Eng., 24, 96–100, 1981.
113. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley & Sons, New York, 1991.
114. Kays, W. M. and London, A. L., Compact Heat Exchangers, McGraw-Hill, New York, 1984.
115. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley & Sons, New York, 1991.
116. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York, 1987.
117. Chenoweth, J. M., Fouling problems in heat exchangers, in Heat Transfer in High Technology and Power Engineering, Yang, W. K. and Mori, Y., Eds., Hemisphere, Washington, D.C., 1987, 406.
118. Garrett-Price, B. A., Smith, S. A., Watts, R. L., Knudsen, J. G., Marner, W. J., and Suitor, J. W., Fouling of Heat Exchangers: Characteristics, Costs, Prevention, Control, and Removal, Noyes, Park Ridge, N.J., 1985.
119. Taborek, J., Akoi, T., Ritter, R. B., and Palen, J. W., Fouling: the major unresolved problem in heat transfer, Chem. Eng. Prog., 68, 59, 1972.
120. Epstein, N., Fouling in heat exchangers, in Heat Transfer 1978, Vol. 6, Hemisphere, Washington, D.C., 1978, 235.
121. Somerscales, E. F. C. and Knudsen, J. G., Eds., Fouling of Heat Transfer Equipment, Hemisphere, Washington, D.C., 1981.
122. Melo, L. F., Bott, T. R., and Bernardo, C. A., Eds., Fouling Science and Technology, Kluwer Publishers, The Netherlands, 1988.
123. Epstein, N., Thinking about heat transfer fouling: a 5×5 matrix, Heat Transfer Eng., 4, 43, 1983.
124. Epstein, N., Fouling in heat exchangers, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, D.C., 1981.
125. Friedlander, S. K., Smoke, Dust and Haze, John Wiley & Sons, New York, 1977.
126. Whitmore, P. J. and Meisen, A., Estimation of thermo-and diffusio-phoretic particle deposition, Can. J. Chem. Eng., 55, 279, 1977.
127. Nishio, G., Kitani, S., and Tadahashi, K., Thermophoretic deposition of aerosol particles in a heat-exchanger pipe, Ind. Eng. Chem. Proc. Design Dev., 13, 408, 1974.
128. Taborek, J., Aoki, T., Ritter, R. B., and Palen, J. W., Predictive methods for fouling behavior, Chem. Eng. Progr., 68, 69, 1972.
129. McCabe, W. L. and Robinson, C. S., Evaporator scale formation, Ind. Eng. Chem., 16, 478, 1924.
130. Kerm, D.Q. and Seaton, R. E., A theoretical analysis of thermal surface fouling, Brit. Chem. Eng., 4, 258, 1959.
131. Knudson, J. G., Fouling of heat exchangers: are we solving the problem?, Chem. Eng. Prog., 80, 63, 1984.
132. Garret-Price, B. A., Smith, S. A., Watts, R. L., and Knudsen, J. G., Industrial Fouling: Problem Characterization, Economic Assessment, and Review of Prevention, Mitigation, and Accomodation Techniques, Report PNL-4883, Pacific Northwest Laboratory, Richland, Washington, 1984.
133. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., New York, 1988.
134. Somerscales, E. F. C., Fouling, in Two-Phase Flow Heat Exchangers: Thermo-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., John Wiley & Sons, New York, 1988, ch. 21.
135. Chenoweth, J. M., General design of heat exchangers for fouling conditions, in Fouling Science and Technology, Melo, L. F., Bott, T. R., and Bernardo, C. A., Eds., Kluwer Publishers, The Netherlands, 1988, 477.
136. Marner, W. J. and Suitor, J. W., Fouling with convective heat transfer, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley & Sons, New York, 1987, ch. 21.
137. Strauss, S. D. and Puckorious, P. R., Cooling-water treatment for control of scaling, fouling and corrosion, Power, 128, S1, 1984.
138. Delorenzo, N. and Anderson, E. D., Heat transfer and pressure drop of liquids in double pipe fintube exchangers, Trans. ASME, 67, 697, 1945.
139. Kakaç, S. and Yener, Y., Heat Conduction, 3rd ed., Taylor and Francis, New York, 1993.
140. Kern, D. Q., Process Heat Transfer, McGraw-Hill, New York, 1950.
141. Fraas, A. P., Heat Exchanger Design, 2nd ed., John Wiley & Sons, New York, 1989.
142. Hewitt, G. F., Shires, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
143. Cherrmisinoff, N. P., Ed., Handbook of Heat and Mass Transfer, Vol. 1, McGraw-Hill, New York, 1986.
144. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley & Sons, New York, 1991.
145. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, New York, 1988.
146. Kakaç, S., Shah, R. K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York, 1987.
147. Guy, A. R., Double-pipe heat exchangers, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1983, ch. 3.
148. Marto, P. J., Heat transfer in condensation, in Boilers, Evaporators and Condensers, Kakaç S., Ed., John Wiley & Sons, New York, 1991.
149. Marto, P. J., Fundamentals of condensation, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988, 221.
150. Nusselt, W., The condensation of steam on cooled surfaces, Z.d. Ver. Deut. Ing., 60, 541, 1916.
151. Shekriladze, I. G. and Gomelauri, V. I., Theoretical study of laminar film condensation of flowing vapor, Int. J. Heat Mass Transfer, 9, 581, 1966.
152. Rose, J. W., Fundamentals of condensation heat transfer: laminar film condensation, JSME Int. J., 31, 357, 1988.
153. Kern, D. Q., Mathematical development of loading in horizontal condensers, AIChE J., 4, 157, 1958.
154. Eissenberg, D. M., An Investigation of the Variables Affecting Steam Condensation on the Outside of a Horizontal Tube Bundle, Ph.D. Thesis, University of Tennessee, Knoxville, 1972.
155. Butterworth, D., Developments in the design of shell and tube condensers, ASME Winter Annual Meeting, Atlanta, ASME Preprint 77-WA/HT-24, 1977.
156. Shklover, G. G. and Buevich, A. V., Investigation of steam condensation in an inclined bundle of tubes, Thermal Eng., 25(6), 49, 1978.
157. Kutateladze, S. S., Gogonin, N. I., Dorokhov, A. R., and Sosunov, V. I., Film condensation of flowing vapor on a bundle of plain horizontal tubes, Thermal Eng., 26, 270, 1979.
158. Fujii, T., Uehara, H., Hirata, K., and Oda, K., Heat transfer and flow resistance in condensation of low pressure steam flowing through tube banks, Int. J. Heat Mass Transfer, 15, 247, 1972.
159. Cavallini, A., Frizzerin, S., and Rossetto, L., Condensation of R-11 vapor flowing downward outside a horizontal tube bundle, Proc. 8th Int. Heat Transfer Conf., 4, 1707, 1986.
160. McNaught, J. M., Two-phase forced convection heat transfer during condensation on horizontal tube bundles, Proc. 7th Int. Heat Transfer Conf., 5, 125, 1982.
161. Marto, P. J., Heat transfer and two-phase flow during shell-side condensation, Heat Transfer Eng., 5(1-2), 31, 1984.
162. Barness, E. J., Calculation of the performance of surface condensers by digital computer, ASME Paper No. 63-PWR-2, National Power Conference, Cincinnati, Ohio, September, 1963.
163. Emerson, W. H., The application of a digital computer to the design of surface condenser, Chemical Eng., 228(5), 178, 1969.
164. Wilson, J. L., The design of condensers by digital computers, I. Chem. E. Symp. Series, Pergamon Press, London, No. 35, 21, 1972.
165. Hafford, J. A., ORCONI: A Fortran Code for the Calculation of a Steam Condenser of Circular Cross Section, ORNL-TM-4248, Oak Ridge National Laboratory, Oak Ridge, Tennessee, 1973.
166. Hopkins, H. L., Loughhead, J., and Monks, C. J., A computerized analysis of power condenser performance based upon an investigation of condensation, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 152, 1983.
167. Shida, H., Kuragaska, M., and Adachi, T., On the numerical analysis method of flow and heat transfer in condensers, Proc. 7th Int. Heat Transfer Conf., 6, 347, 1982.
168. Al-Sanea, S., Rhodes, N., Tatchell, D. G., and Wilkinson, T. S., A computer model for detailed calculation of the flow in power station condensers, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 70, 1983.
169. Caremoli, C., Numerical computation of steam flow in power plant condensers, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 89, 1983.
170. Beckett, G., Davidson, B. J., and Ferrison, J. A., The use of computer programs to improve condenser performance, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 97, 1983.
171. Zinemanas, D., Hasson, D., and Kehat, E., Simulation of heat exchangers with change of phase, Comput. Chem. Eng., 8, 367, 1984.
172. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley & Sons, New York, 1991.
173. Soliman, H. M. and Azer, N. Z., Visual studies of flow patterns during condensation inside horizontal tubes, Proc. 5th Int. Heat Transfer Conf., 3, 241, 1974.
174. Rahman, M. M., Fathi, A. M., and Soliman, H. M., Flow pattern boundaries during condensation: new experimental data, Canadian J. Chem. Eng., 63, 547, 1985.
175. Soliman, H. M., Flow pattern transitions during horizontal in-tube condensation, in Encyclopedia of Fluid Mechanics, Gulf Publishing Co., Houston, TX, 1986, ch. 12.
176. Breber, G., Palen, J. W., and Taborek, J., Prediction of horizontal tubeside condensation of pure components using flow regime criteria, J. Heat Transfer, 102, 471, 1980.
177. Tandon, T. N., Varma, H. K., and Gupta, C. P., A new flow regime map for condensation inside horizontal tubes, J. Heat Transfer, 104, 763, 1982.
178. Butterworth, D., Film condensation of pure vapor, in Heat Exchanger Design Handbook, Vol. 2, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1983.
179. Jaster, H. and Kosky, P. G., Condensation heat transfer in a mixed flow regime, Int. J. Heat Mass Transfer, 19, 95, 1976.
180. Traviss, D. P., Rohsenow, W. M., and Baron, A. B., Forced convection condensation inside tubes: a heat transfer equation for condenser design, ASHRAE Trans., 79, 157, 1972.
181. Cavallini, A. and Zecchin, R., A dimensionless correlation for heat transfer in forced convection condensation, Proc. 5th Int. Heat Transfer Conf., 309–313, Sept. 5–7, 1974.
182. Shah, M. M., A general correlation for heat transfer during film condensation inside pipes, Int. J. Heat Mass Transfer, 22, 547, 1979.
183. Schlager, L. M., Pate, M. B., and Bergles, A. E., Performance predictions of refrigerant–oil mixtures in smooth and internally finned tubes, II: design equations, ASHRAE Trans., 96(1), 1990.
184. Pate, M. B., Evaporators and condensers for refrigeration and air conditioning, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 635–712, 1991.
185. Wallis, G. B., Flooding Velocities for Air and Water in Vertical Tubes, UKAEA report AEEW-R123, 1961.
186. Butterworth, D. and Shock, R. A., Flow boiling, Proc. 7th Int. Heat Transfer Conf., Hemisphere, Washington, D.C., 1982.
187. Davis, E. J. and Anderson, G. H., The incipience of nucleate boiling in convective flow, AIChE J., 12, 774, 1966.
188. Bergles, A. E. and Rohsenow, W. M., The determination of forced-convection surface-boiling heat transfer, J. Heat Transfer, 86, 356, 1964.
189. Kitto, J. B. and Albrecht, M. J., Elements of two-phase flow in fossil boilers, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988, 221.
190. Collier, J. G., Convective Boiling and Condensation, 2nd ed., McGraw-Hill, London, 1981.
191. Chen, J. C., A correlation for boiling heat transfer to saturated fluids in convective flow, Industrial Eng. Chem. Process Design Dev., 5, 322, 1966.
192. Shah, M. M., A new correlation for heat transfer during boiling flow through pipes, ASHRAE Trans., 82, 66, 1976.
193. Shah, M. M., Chart correlation for saturated boiling heat transfer: equations and further study, ASHRAE Trans., 88, 185, 1982.
194. Güngör, K. E. and Winteron, R. H. S., A general correlation for flow boiling in tubes and annuli, Int. J. Heat Mass Transfer, 19(3), 351, 1986.
195. Kandlikar, S. G., A model for correlating flow boiling heat transfer in augmented tubes and compact evaporators, J. Heat Transfer, 113, 966, 1991.
196. Kandlikar, S. S., A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes, J. Heat Transfer, 112, 219, 1990.
197. Brown, W. T., Jr., A Study of Flow Surface Boiling, Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1967.
198. Jens, W. H. and Lottes, P. A., An Analysis of Heat Transfer, Burnout, Pressure Drop, and Density Data for High Pressure Water, Argonne National Laboratory Report ANL-4627, 1951.
199. Guglielmini, G., Nannei, E., and Pisoni, C., Warme und Stoffübertragung, 13, 177, 1980.
200. Pokhvalov, Y. E., Kronin, G. H., and Kurganova, I. V., Teploenergetika, 13, 63, 1966.
201. Thom, J. R. S., Walker, V. M., Fallon, J. S., and Reising, G. F. S., Proc. Inst. Mech. Eng., 3C/80, 226, 1965/66.
202. Rassokhin, N. G., Shvetsvov, N. K., and Kuzmin, A. V., Thermal Eng., 9, 86, 1970.
203. Forster, H. K. and Zuber, N., Dynamics of vapor bubbles and boiling heat transfer, AIChE J., 1(4), 531, 1955.
204. Mayinger, F. and Ahrens, K. H., Boiling heat transfer in the transition region from bubble flow to annular flow, International Seminar on Momentum Heat Mass Transfer in Two-Phase Energy and Chemical Systems, Dubrovnik, Yugoslavia, 1978.
205. Smith, R. A., Vaporisers: Selection Design and Operation, Longman Scientific and Technical and John Wiley & Sons, New York, 1976.
206. Cooper, M. G., Saturation nucleate pool boiling: a simple correlation, 1st U.K. Natl. Conf. Heat Transfer, I. Chem. Eng. Symp. Series, Pergamon Press, London, Vol. 2, No. 86, 785, 1984.
207. Mumm, J. F., Heat Transfer Boiling to Water Forced Through a Uniformly Heated Tube, ANL-5276, 1954.
208. Wright, R. M., Downflow Forced Convection Boiling of Water in Uniformly Heated Tube, UCRL Report, University of California at Berkley, 1961.
209. Jallouk, P. A., Two Phase Flow Pressure Drop and Heat Transfer Characteristics of Refrigerants in Vertical Tubes, Ph.D. Dissertation, University of Tennessee, 1974.
210. Chawla, J. M., Warmeubergang und Druckabfall in Waagrechten Rohren Bei Der Stromung Von Verdampfenden Kaltemitteln, VDI-Forschungsheft 523, 1967.
211. Steiner, D. and Schlünder, E. U., Heat transfer and pressure drop for boiling nitrogen flowing in a horizontal tube, in Heat Transfer in Boiling, Hahne, E. and Grigull, U., Eds., Hemisphere, Washington, D.C., 1977, 263.
212. Mohr, V. and Runge, R., Forced convection boiling of neon in horizontal tubes, in Heat Transfer in Boiling, Hahne, E. and Grigull, U., Eds., Hemisphere, Washington, D.C., 1977, 307.
213. Bandel, J. and Schlünder, E. U., Frictional pressure drop and convective heat transfer of gas liquid flow in horizontal tubes, Proceedings of the Fifth International Heat Transfer Conference,1974, 190.
214. Kandlikar, S. G., A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes, Mechanical Engineering Dept., Rochester Institute of Technology, Rochester, N.Y., 1988.
215. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th edition, Tarrytown, NY, 1988.
216. Butterworth, D., Condensers and their design, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
217. Fraas, A. P., Heat Exchanger Design, John Wiley & Sons, New York, 1989.
218. Kakaç, S., Bergles, A. E., and Mayinger, F. Eds., Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Taylor and Francis, Washington, D.C., 1981.
219. Bell, K. J., Preliminary design of shell and tube heat exchangers., in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Taylor and Francis, Washington, D. C., 1981, 559.
220. Taborek, J., Shell-and-tube heat exchangers, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1983, Section 3.3.
221. Taborek, J., Industrial heat exchanger design practices, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991, 143.
222. Kern, D. Q., Process Heat Transfer, McGraw-Hill, New York, 1950.
223. Tinker, T., Shell-side characteristics of shell-and-tube heat exchangers, in General Discussion on Heat Transfer, Institute for Mechanical Engineering and ASME, New York and London, 1951, 97.
224. Palen, J. W. and Taborek, J., Solution of shell-side flow pressure drop and heat transfer by stream analysis method, Heat Transfer—Philadelphia, CEP Symp. Series No. 92, Vol. 66, 1969, 53.
225. Bell, K. J., Delaware method of shell-side design, in Heat Transfer Equipment Design, Shah, R. K., Sunnarao, E. C., and Mashelkar, R. A., Eds., Taylor and Francis, Washington, D.C., 1988.
226. Bell, K. J., Delaware method for shell side design, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Taylor and Francis, Washington D. C., 1981, 581.
227. Hewitt, G. F., Shires, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
228. Biniciogullari, D., Comparative study of shell-and-tube heat exchangers versus gasketed-plate heat exchangers, M.S. Thesis, METU, Ankara, 2001.
229. Webb, R. L., Principles of Enhanced Heat Transfer, John Wiley & Sons, New York, 1994.
230. Kakaç, S., Shah, R. K., and Mayinger, F., Eds., Low Reynolds Number Flow Heat Exchangers, Hemisphere, Washington, D.C., 1982.
231. Kays, W. M. and London, A. L., Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York, 1984.
232. Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Hemisphere, Washington, D.C., 1981.
233. Fraas, A. P., Heat Exchanger Design, 2nd ed., John Wiley & Sons, New York, 1989.
234. Özisik, M. N., Heat Transfer — A Basic Approach, McGraw-Hill, New York, 1985.
235. Bejan, A., Heat Transfer, John Wiley & Sons, New York, 1993.
236. Thermal Handbook, Alfa-Laval Thermal AB, Lund, Sweden.
237. Saunders, E. A. D., Heat Exchangers — Selection, Design, and Construction, John Wiley & Sons, New York, 1988.
238. Raju, K. S. N. and Bansal, J. C., Plate heat exchangers and their performance, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, D.C., 899–912, 1983.
239. Cooper, A. and Usher, J. D., Plate heat exchangers, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1988, ch. 3.
240. Raju, K. S. N. and Bansal, J. C., Design of plate heat exchangers, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, D.C., 913–932, 1983.
241. Edwards, M. F., Heat transfer in plate heat exchangers at low Reynolds numbers, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, D.C., 933–947, 1983.
242. Wilkinson, W. L., Flow distribution in plate exchangers, Chem. Eng., No. 285, 289, 1974.
243. Marriott, J., Where and how to use plate heat exchangers, Chem. Eng., 78(8), 127, 1971.
244. Cooper, A., Suitor, J. W., and Usher, J. D., Cooling water fouling in plate heat exchangers, Heat Transfer Eng., 1(3), 50, 1980.
245. Kumar, H., The plate heat exchanger: construction and design, 1st UK National Conference on Heat Transfer, University of Leeds, 3-5 July, Inst. Chem. Symp. Series, No. 86, 1275–1286, 1984.
246. Edwards, M. F., Changal, A. A., and Parrott, D. L., Heat transfer and pressure drop characteristics of a plate heat exchanger using Newtonian and non-New-tonian liquids, Chem. Eng., 286–293, May 1974.
247. McKillop, A. A. and Dunkley, W. L., Heat transfer, Industrial Eng. Chem., 52(9), 740, 1960.
248. Clark, D. F., Plate heat exchanger design and recent development, Chem. Eng., No. 285, 275, 1974.
249. Manglik, R. M., Plate heat exchangers for process industry applications: enhanced thermal-hydraulic characteristics of chevron plates, in Process, Enhanced and Multiphase Heat Transfer, Manglik, R. M. and Kraus, A. D., Eds., Begel House, New York, 1996.
250. Savostin, A. F. and Tikhonov, A. M., Investigation of the characteristics of plate-type heating surfaces, Thermal Eng., 17(9), 113, 1976.
251. Tovazhnyanski, L. L., Kapustenko, P. A., and Tsibulnik, V. A., Heat transfer and hydraulic resistance in channels of plate heat exchangers, Energetika, 9, 123, 1980.
252. Chisholm, D. and Wanniarachchi, A. S., Maldistribution in single-pass mixed-channel plate heat exchangers, in Compact Heat Exchangers for Power and Process Industries, HTD-Vol. 201, ASME, New York, 1992, 95.
253. Heavner, R. L., Kumar, H., and Wanniarachchi, A. S., Performance of an industrial plate heat exchanger: effect of chevron angle, AICHE Symposium Series No. 295, Vol. 89, AICHE, New York, 262, 1993.
254. Talik, A. C. and Swanson, L. W., Heat transfer and pressure drop characteristics of a plate heat exchanger using a propylene-glycol/water mixture as the working fluid, Proc. 30th Natl. Heat Transfer Conf., 12, 83, 1995.
255. Muley, A. and Manglik, R. M., Experimental investigation of heat transfer enhancement in a PHE with β = 60° chevron plates, in Heat and Mass Transfer, Tata McGraw-Hill, New Delhi, India, 1995, 737.
256. Muley, A. and Manglik, R. M., Enhanced heat transfer characteristics of single-phase flows in a plate heat exchanger with mixed chevron plates, J. Enhanced Heat Transfer, under review.
257. Muley, A., Manglik, R. M., and Metwally, H. M., Enhanced heat transfer characteristics of viscous liquid flows in a chevron plate heat exchanger, J. Heat Transfer, 121(4), 1011, 1999.
258. Muley, A. and Manglik, R. M., Enhanced thermal-hydraulic performance of chevron plate heat exchangers, Int. J. Heat Exchangers, 1, 3, 2000.
259. Muley, A. and Manglik, R. M., Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates, J. Heat Transfer, 121(1), 110, 1999.
260. Kakaç, S., Shah, R. K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York, 1987.
261. Buonopane, R. A., Troupe, R. A., and Morgan, J. C., Heat transfer design method for plate heat exchangers, Chem. Eng. Prog., 59, 57, 1963.
262. Foote, M. R., Effective mean temperature difference in multi-pass plate heat exchangers, Nat. Eng. Lab., U.K., Report No. 303, 1967.
263. Bell, J. K., Plate heat exchanger, in Heat Exchangers — Thermal Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, D.C., 165–176, 1981.
264. Hewitt, G. F., Shirs, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
265. Shah, R. K. and Focke, W. W., Plate heat exchangers and their design theory, in Heat Transfer Equipment Design, Shah, R. K., Subbarao, E. C., and Mashelkar, R. A., Eds., Hemisphere, Washington, D.C., 227–254, 1988.
266. Biniciogullari, D., Comparative study of shell-and-tube heat exchangers versus gasketed-plate heat exchangers, M.S. Thesis, METU, Ankara, 2001.
267. Butterworth, D., Steam power plant and processes condensers, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991, 571.
268. Butterworth, D., Condensers and their design, in Two-Phase Flow Heat Exchangers, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
269. Mueller, A. C., Selection of condenser types, in Heat Exchanger Design Handbook, Hemisphere, Washington, D.C., 1983.
270. Breber, G., Condenser design with pure vapor and mixture of vapors, in Heat Transfer Equipment Design, Shah, R. K., Subbarao, E. C., and Mashelkar, R. A., Eds., Hemisphere, Washington, D.C., 1988, 477.
271. Bell, K. J. and Mueller, A. C., Condensation Heat Transfer Condenser Design, AIChE Today Series, American Institute of Chemical Engineers, New York, 1971.
272. Sebald, J. F., A development history of steam surface condensers in the electrical utility industry, Heat Transfer Eng., 1(3), 80, 1980.
273. Alfa Laval, Thermal Handbook, Lund, Sweden.
274. Taborek, J., Industrial heat transfer exchanger design practices, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991, 143.
275. Steinmeyer, D. E. and Muller, A. C., Why condensers don’t operate as they are supposed to, Chem. Eng. Progress, 70, 78, 1974.
276. Pate, M. B., Evaporators and condensers for refrigeration and air-conditioning systems, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley & Sons, New York, 1991.
277. Althouse, A. D., Turnquist, C. H., and Bracciano, A. F., Modern Refrigeration and Air-Conditioning, The Goodheat-Willcox Co., 1968.
278. Trane Air Conditioning Manual, The Trane Company, Lacrosce, Wisconsin, 1979.
279. Equipment Handbook, ASHRAE, Atlanta, 1988.
280. Condensers, in Equipment Handbook, ASHRAE, Atlanta, 1983, ch. 16.
281. Shah, M. M., Chart correlation for saturated boiling heat transfer: equation and further study, ASHRAE Trans., 88, 185, 1982.
282. Kandlikar, S. G., A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes, J. Heat Transfer, 11, 219, 1990.
283. Güngör, K. E. and Winterton, R. H. S., A general correlation for flow boiling in tubes and annuli, Int. J. Heat Mass Transfer, 29, 351, 1986.
284. Cooper, M. G., Saturated nucleate pool boiling, a simple correlation of data for isothermal two-phase two-component flow in pipes, Chem. Eng. Progress, 45(39), 39, 1949.