Theoretical aspects of phase morphology development

Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces

Volumn , Issue , 2005, Pages 43-90

  Fortelný, Ivan ^a  

^a INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Czech Republic)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056424360     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (97)

1. Favis, B.D., Factors influencing the morphology of immiscible polymer blends in melt processing, in Polymer Blends, Vol. 1: Formulations, Paul, D.R. and Bucknall, C.B., Eds., J. Wiley & Sons, New York, 2000, pp. 501-537.
2. Lyngaae-Jørgensen, J., Rheology of polymer blends, in Polymer Blends and Alloys, Folkes, M.J. and Hope, P.S., Eds., Blackie Academic & Professional, London, 1993, pp. 75-102.
3. Janssen, J.M.H., Emulsions: the dynamic of liquid-liquid mixing, in Materials Science and Technology, Vol. 18, Processing of Polymers, Meijer, H.E.H., Ed., Wiley-VCH, Weinheim, Germany, 1997, pp. 115-188.
4. Meijer, H.E.H. and Janssen, J.M.H., Mixing of immiscible liquids, in Mixing and Compounding of Polymers, Manas-Zloczower, I. and Tadmor, Z., Eds., Hanser Publishers, Munich, 1994, pp. 85-147.
5. Utracki, L.A. and Shi, Z.H., Development of polymer blend morphology during compounding in a twin-screw extruder. Part I. Droplet dispersion and coalescence — a review. Polym. Eng. Sci., 32, 1824-1833, 1992.
6. Fortelný, I., Kovář, J., and Stephan, M., Analysis of the phase structure development during the melt mixing in polymer blends, J. Elastomers Plastics, 28, 106-139, 1996.
7. Pötschke, P. and Paul, D.R., Formation of cocontinuous structures in melt-mixed immiscible polymer blends, J. Macromol. Sci., C43, 87-141, 2003.
8. Lyngaae-Jørgensen, J. and Utracki, L.A., Dual phase continuity in polymer blends, Makromol. Chem., Macromol. Symp., 48/49, 189-209, 1991.
9. Van Oene, H., Rheology of polymer blends and suspensions, in Polymer Blends, Vol. 1, Paul, D.R. and Newman, S., Eds., Academic Press, New York, 1978, pp. 295-352.
10. Tucker, C.L. and Moldenaers, P., Microstructural evolution in polymer blends, Annu. Rev. Fluid Mech., 34, 177-210, 2002.
11. Glansdorff, P. and Prigogine, I., Thermodynamic Theory of Structure, Stability and Fluctuations, Wiley-Interscience, London, 1971.
12. Hobbs, S.Y., Dekkers, M.E.J., and Watkins, W.H., Effect of interfacial forces on polymer blends, Polymer, 29, 1598-1602, 1988.
13. Guo, H.F., Packirisamy, S., Gvozdic, N.V., et al., Prediction and manipulation of the phase morphologies of multiphase polymer blends. I. Ternary systems. Polymer, 38, 785-794, 1997.
14. Miroshnikov, Y.P., Kozlova, G.S., and Voloshina, Y.N., Osobennosti processov dispergirovania v mnogokomponentnych polimernych sistemach, Vysokomol. Soed, 31, 767-771, 1989.
15. Guo, H.-F., Gvozdic, N.V., and Meier, D.J., Prediction and manipulation of the phase morphologies of multiphase polymer blends. II. Quarternary systems, Polymer, 38, 4915-4923, 1997.
16. Luzinov, I., Pagnoulle, C., and Jérôme, R., Ternary polymer blend with core-shell dispersed phases: effect of the core-forming polymer on phase morphology and mechanical properties, Polymer, 41, 7099-7109, 2000.
17. Henmati, N., Nazokdast, H., and Panahi, H.S., Study on morphology of ternary polymer blends. I. Effects of melt viscosity and interfacial interaction, J. Appl. Polym. Sci., 82, 1129-1137, 2001.
18. Nemirovski, N., Siegmann, A., and Narkis, M. Morphology of ternary immiscible polymer blends, J. Macromol. Sci. Phys., B34, 459-475, 1995.
19. Gupta, A.K. and Shrinivasan, K.R., Melt rheology and morphology of PP/SEBS/PC ternary blends, J. Appl. Polym. Sci., 47, 167-184, 1993.
20. Reignier, J., Favis, B.D., and Heuzey, M.-C., Factors influencing encapsulation behavior in composite droplet-type polymer blends, Polymer, 44, 49-59, 2003.
21. Van Oene, H.J., Modes of dispersion of viscoelastic fluids in flow, J. Colloid Interface Sci., 40, 448-467, 1972.
22. Stone, H.A., Dynamics of drop deformation and breakup in viscous fluids, Annu. Rev. Fluid Mech., 26, 65-102, 1994.
23. Elmendorp, J.J., Dispersive mixing in liquid systems, in Mixing in Polymer Processing, Rauwendaal, C., Ed., Marcel Dekker, New York, 1991, pp. 17-100.
24. Han, C.D., Multiphase Flow in Polymer Processing, Academic Press, New York, 1981.
25. Taylor, G.I., The formation of emulsions in definable fields of flow, Proc. R. Soc. London, Ser. A, 146, 501-523, 1934.
26. Chaffey, C.E. and Brenner, H., A second-order theory for shear deformation of drops, J. Colloid Interface Sci., 24, 258-269, 1967.
27. Cox, R.G., The deformation of a drop in a general time-dependent fluid flow, J. Fluid Mech., 37, 601-623, 1969.
28. Barthès-Biesel, D. and Acrivos, A., Deformation and burst of a liquid droplet freely suspended in a linear shear field, J. Fluid Mech., 61, 1-21, 1973.
29. Grace, H.P., Dispersion phenomena in high viscosity immiscible fluid systems and application of static mixers as dispersion devices in such systems, Chem. Eng. Commun., 14, 225-277, 1982.
30. deBruijn, R.A., Deformation and Break-up of Drops in Simple Shear Flows, Ph.D. thesis, Eindhoven Univ. Technol., The Netherlands, 1989.
31. Levitt, L., Macosko, C.W., and Pearson, S.D., Influence of normal stress difference on polymer drop deformation, Polym. Eng. Sci., 36, 1647-1655, 1996.
32. Mighri, F., Carreau, P.J., and Ajji, A., Influence of elastic properties on drop deformation and breakup in shear flow, J. Rheol., 42, 1477-1490, 1998.
33. Lerdwijitjarud, W., Larson, R.G., Sirivat, A., et al., Influence of weak elasticity of dispersed phase on droplet behavior in sheared polybutadiene/poly(dimethyl siloxane) blends, J. Rheol., 47, 37-58, 2003.
34. Tomotika, S., On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid, R. Soc. London, Ser. A, 150, 322-337, 1935.
35. Palierne, J.F. and Lequeux, F., Sausage instability of a thread in a matrix; linear theory for viscoelastic fluids and interface, J. Non-Newtonian Fluid. Mech., 40, 289-306, 1991.
36. Kuhn, W., Spontane Aufteilung von Flüssigkeitszylindern in kleine Kugeln, Kolloid Z., 132, 84-99, 1953.
37. Mikami, T., Cox, R.G., and Mason, R.G., Breakup of extending liquid threads, Int. J. Multiphase Flow, 2, 113-138, 1975.
38. Khakhar, D. and Ottino, J.M., Breakup of liquid threads in linear flows, Int. J. Multiphase Flow, 13, 71-86, 1987.
39. Van Puyvelde, P., Yang, H., Mewis, J., et al., Breakup of filaments in blends during simple shear flow, J. Rheol., 44, 1401-1415, 2000.
40. Cristini, V., Guido, S., Alfani, A., et al., Drop breakup and fragment distribution in shear flow, J. Rheol., 47, 1283-1298, 2003.
41. Choi, S.J. and Schowalter, W.R., Rheological properties of nondilute suspensions of deformable particles, Phys. Fluids, 18, 420-427, 1975.
42. Jansen, K.M.B., Agterof, W.G.M., and Mellema, J., Droplet breakup in concentrated emulsions, J. Rheol., 45, 227-236, 2001.
43. Utracki, L.A., On the viscosity-concentration dependence of immiscible polymer blends, J. Rheol., 35, 1615-1637, 1991.
44. Chesters, A.K., The modeling of coalescence processes in fluid-liquid dispersions: a review of current understanding, Trans. Inst. Chem. Eng. (A), 69, 259-270, 1991.
45. Milner, T. and Xi, H., How copolymers promote mixing of immiscible homopolymers, J. Rheol., 40, 663-687, 1996.
46. Fortelný, I., Coalescence in polymer blends: solved and open problems, Macromol. Symp. 158, 137-147, 2000.
47. Janssen, M.H. and Meijer, H.E.H., Dynamic of liquid-liquid mixing: a 2-zone model, Polym. Eng. Sci., 35, 1766-1780, 1995.
48. Fortelný, I. and Živný, A., Extensional flow induced coalescence in polymer blends, Rheol. Acta, 42, 454-461, 2003.
49. Zeichner, G.R. and Schowalter, W.R., Use of trajectory analysis to study stability of colloidal dispersions in flow fields, AIChE J., 23, 243-254, 1977.
50. Wang, H., Zinchenko A.K., and Davis, R.H., The collision rate of small drops in linear flow fields, J. Fluid Mech., 265, 161-188, 1994.
51. Rother, M.A. and Davis, R.H., The effect of slight deformation on droplet coalescence in linear flow, Phys. Fluids, 13, 1178-1190, 2001.
52. Jeelani, S.A.K. and Hartland, S., Effect of interfacial mobility on thin film drainage, J. Colloid Interface Sci., 164, 296-308, 1994.
53. Zhang, X. and Davis, R.H., The collision of small drops due to Brownian and gravitational motion, J. Fluid Mech., 230, 479-504, 1991.
54. Nir, A. and Acrivos A., On the creeping motion of two arbitrary-sized touching spheres in linear shear fields, J. Fluid Mech., 59, 209-223, 1973.
55. Elmendorp, J.J. and Van der Vegt, A.K., A study of polymer blending microrheology. Part IV. The influence of coalescence on blend morphology origination, Polym. Eng. Sci., 26, 1332-1338, 1986.
56. Elmendorp, J.J., A Study on Polymer Blending Microrheology, Ph.D. thesis, Tech. University Delft, The Netherlands, 1986.
57. Fortelný, I., An analysis of the origin of coalescence suppression in compatibilized polymer blends, Europ. Polym. J., 40, 2161-2166, 2004.
58. Patlazhan, S.A. and Lindt, J.T., Kinetics of structure development in liquid-liquid dispersion under simple shear flow, Theory. J. Rheol., 40, 1095-1113, 1996.
59. Tanaka, H., Coarsening mechanisms of droplet spinodal decomposition in binary fluid mixtures, J. Chem. Phys., 105, 10099-10114, 1996.
60. Tokita, N., Analysis of morphology formation in elastomer blends, Rubber Chem. Technol., 50, 292-300, 1977.
61. Fortelný, I. and Ková, J., Droplet size of the minor component in the mixing of melts of immiscible polymers, Eur. Polym. J., 25, 317-319, 1989.
62. Lyngaae-Jørgensen, J. and Valenza, A., Structuring of polymer blends in simple shear flow, Makromol. Chem., Macromol. Symp., 38, 43-60, 1990.
63. Fortelný, I. and Živný, A., Theory of competition between breakup and coalescence in flowing polymer blends, Polym. Eng. Sci., 35, 1872-1877, 1995.
64. Huneault, M.A., Shi, Z.H., and Utracki, L.A., Development of polymer blend morphology during compounding in a twin-screw extruder. Part IV. A new computational model with coalescence, Polym. Eng. Sci., 35, 115-127, 1995.
65. Delamare, L. and Vergnes, B., Computation of morphological changes of a polymer blend along a twin-screw extruder, Polym. Eng. Sci., 36, 1685-1693, 1996.
66. Potente, H. and Bastian, M., Calculating morphology development of polymer blends in extruders on the basis of results of boundary and finite element simulations using the sigma simulation software, Polym. Eng. Sci., 40, 727-737, 2000.
67. Fortelný, I., Analysis of the effect of breakup frequency on the steady droplet size in flowing polymer blends, Rheol. Acta, 40, 485-489, 2001.
68. Lyu, S.P., Bates, F.S., and Macosko, C.W., Modeling of coalescence in polymer blends, AIChE J., 48, 7-14, 2002.
69. Maffettone, P.L. and Minale, M., Equation of change for ellipsoidal drops in viscous flow, J. Non-Newton. Fluid Mech., 78, 227-241, 1998.
70. Palierne, J.F., Linear rheology of viscoelastic emulsions with interfacial tension, Rheol. Acta, 29, 204-214, 1990; erratum, Rheol. Acta, 30, 497, 1991.
71. Veenstra, H., Van Damm, J., and Posthuma de Boer, A., On the coarsening of cocontinuous morphologies in polymer blends: effect of interfacial tension, viscosity and physical cross-links, Polymer, 41, 3037-3045, 2000.
72. Crist, B. and Nesarikar, A.R., Coarsening in polyethylene-copolymer blends, Macromolecules, 28, 890-896, 1995.
73. Fortelný, I., Živný, A., and Jůza, J., Coarsening of the phase structure in immiscible polymer blends. Coalescence or Ostwald ripening? J. Polym. Sci., Part B, Polym. Phys., 37, 181-187, 1999.
74. Overbeek, J.T.G., Kinetics of flocculation, in Colloid Science, Vol. I, Kruyt, H.K., Ed., Elsevier, Amsterdam, 1952, pp. 278-301.
75. Fortelný, I. and Ková, J., Theory of coalescence in immiscible polymer blends, Polym. Compos., 9, 119-124, 1988.
76. Willemse, R.C., Ramaker, E.J.J., Van Dam, J. et al., Coarsening in molten quiescent polymer blends: the role of initial morphology, Polym. Eng. Sci., 39, 1717-1725, 1999.
77. van Gisbergen, J.G.M. and Meijer, H.E.H., Influence of electron beam irradiation on the microrheology of incompatible polymer blends: thread break-up and coalescence, J. Rheol., 35, 63-87, 1991.
78. Fortelný, I. and Živný, A., Coalescence in molten quiescent polymer blends, Polymer, 36, 4113-4118, 1995.
79. Fortelný, I. and Živný, A., Film drainage between droplets during their coalescence in quiescent polymer blends, Polymer, 39, 2669-2675, 1998.
80. Yu, W., Zhou, C., and Inoue, T., A coalescence mechanism for the coarsening behavior of polymer blends during a quiescent annealing process. I. Monodispersed particle system, J. Polym. Sci., Part B, Polym. Phys., 38, 2378-2389, 2000.
81. Yu, W., Zhou, C., and Inoue, T. A coalescence mechanism for the coarsening behavior of polymer blends during a quiescent annealing process. II. Polydispersed particle system, J. Polym. Sci., Part B, Polym. Phys., 38, 2390-2399, 2000.
82. Wallheinke, K., Pötschke, P., Macosko, C. W., et al., Coalescence in blends of thermoplastic polyurethane with polyolefins, Polym. Eng. Sci., 39, 1022-1034, 1999.
83. Van Puyvelde, P., Velankar, S., and Moldenaers, P., Rheology and morphology of compatibilized polymer blends, Curr. Opin. Colloid Interface Sci., 6, 457-463, 2001.
84. Hudson, S.D. and Jamieson, A.M., Morphology and properties of blends containing block copolymers, in Polymer Blends, Vol. 1: Formulations, Paul, D.R. and Bucknall, C.B., Eds., J. Wiley& Sons, New York, 2000, pp. 461-499.
85. Lyatskaya, Yu., Gersappe, D., Gross, N.A., et al., Designing compatibilizers to reduce interfacial tension in polymer blends, J. Phys. Chem., 100, 1449-1458, 1996.
86. Fortelný, I., Breakup and coalescence of dispersed droplets in compatibilized polymer blends, J. Macromol. Sci. Phys., B39, 67-78, 2000.
87. Stone, H.A. and Leal, L.G., The effects of surfactants on drop deformation and breakup, J. Fluid Mech., 220, 161-186, 1990.
88. Flumerfelt, R.W., Effects of dynamic interfacial properties on drop deformation and orientation in shear and extensional flow fields, J. Colloid Interface Sci., 76, 330-349, 1980.
89. Van Puyvelde, P., Velankar, S., Mewis, J., et al., Effect of Marangoni stresses on the deformation and coalescence in compatibilized immiscible blends, Polym. Eng. Sci., 42, 1956-1964, 2002.
90. Sundararaj, U. and Macosko, C.W., Drop break-up and coalescence in polymer blends: the effects of concentration and compatibilization, Macromolecules, 28, 2647-2657, 1995.
91. Lyu, S.-P., Jones, T.D., Bates, F.S., and Macosko, C.W., Role of block copolymers on suppression of droplet coalescence, Macromolecules, 35, 7845-7855, 2002.
92. Lyu, S.-P., Block copolymers suppressing coalescence through stopping film rupture, Macromolecules, 36, 10052-10055, 2003.
93. Cristini, V., Blawzdziewicz, J., and Loewenberg, M., Near-contact motion of surfactant-covered spherical drops, J. Fluid Mech., 366, 259-287, 1998.
94. Blawzdziewicz, J., Cristini, V., and Loewenberg, M., Near-contact motion of surfactant-covered spherical drops: Ionic surfactants, J. Colloid Interface Sci., 211, 355-366, 1999.
95. Chesters, A.K. and Bazhlekov, I.B., Effect of insoluble surfactants on drainage and rupture of a film between drops interacting under a constant force, J. Colloid Interface Sci., 230, 229-243, 2000.
96. Fortelný, I. and Živný, A., Theoretical description of steady droplet size in polymer blends containing a compatibilizer, Polymer, 41, 6865-6873, 2000.
97. Hlavatá, D., Hromádková, J., Fortelný, I., et al., Compatibilization efficiency of styrene-butadiene triblock copolymers in polystyrene-polypropylene blends with varying compositions, J. Appl. Polym. Sci., 92, 2431-2441, 2004.