Transformation of a structured carrier into a structured catalyst

Structured Catalysts and Reactors

Volumn , Issue , 2005, Pages 751-778

  Xu, Xiaoding ^a   Moulijn, Jacob A ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056329558     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781420028003     Document Type: Chapter

References (174)

1. DeLuca, J.P. and Campbell, L.E., Monolithic catalyst supports, in Advanced Materials in Catalysis, Burton, J.J. and Garten, R.L., Eds., Academic Press, London, 1977, pp. 293-324.
2. Lachman, I.M. and McNally, R.N., Monolithic honeycomb supports for catalysis, Chem. Eng. Prog., Jan., 29-31, 1985.
3. Stiles, A.B., Getting the catalyst and the support together, in Catalyst Supports and Supported Catalysts, Theoretical and Applied Concepts, Butterworths, Boston, 1987, pp. 6-9.
4. Irandoust, S. and Andersson, B., Monolithic catalysts for nonautomobile applications. Catal. Rev. Sci. Eng., 30, 341-392, 1988.
5. Cybulski, A. and Moulijn, J.A., Monolith in heterogeneous catalysis, Catal. Rev. Sci. Eng., 36, 179-270, 1994.
6. Nijhuis, A.T., Beers, A.E.W., Vergunst, Th., Hoek, I., Kapteijn, F., and Moulijn, J.A., Preparation of monolithic catalysts, Catal. Rev. Sci. Eng., 43, 345-380, 2001.
7. Vergunst, Th., Linders, M.J.G., Kapteijn, F., and Moulijn, J.A., Carbon-based monolithic structures, Catal. Rev. Sci. Eng., 3, 291-314, 2001.
8. Vergunst, Th., Kapteijn, F., and Moulijn, J.A., Preparation of carbon-coated monolithic supports, Carbon, 40, 1891-1902, 2002.
9. Geus, J.W. and van Giezen, J.C., Monoliths in catalytic oxidation, Catal. Today, 47, 169180, 1999.
10. Williams, J.L., Monolith structures, materials, properties and uses, Catal. Today, 69, 3-9, 2001.
11. Forzatti, P., Ballardini, D., and Sighicelli, L., Preparation and characterization of extruded monolithic ceramic catalysts, Catal. Today, 41, 87-94, 1998.
12. Merkel, G.A. and Murtagh, M.J., Fabrication of Low Thermal Expansion, High Porosity Cordierite Body, European Patent 545,008, June 9, 1993.
13. Murtagh, M.J., Method for Producing Cordierite Articles, U.S. Patent 5,141,686, August 25, 1992.
14. Beall, D.M., DeLiso, E.M., Guile, D.L., and Murtagh, M.J., Fabrication of Cordierite Bodies, U.S. Patent 5,114,644, August 19, 1992.
15. Kasai, Y., Kumazawa, K., Hamanaka, T., and Itoh, T., Process of Producing Cordierite Honeycomb Structure, European Patent 506,301, September 30, 1992.
16. Bustamante, G.M., Manufacture of Ceramic Body, Especially for Use as Catalyst Support for Vehicle Exhaust Systems, British Patent 8,906,554. June 18, 1991.
17. Kanazawa, H., Fujimoto, Y., and Ogura, Y., Diesel Particulate Filter, Japanese Patent 3,242,213, October 29, 1991.
18. Forsoythe, G.D., Thermal Shock Resistant Ceramic Honeycomb Structures, European Patent 455,451. November 6, 1991.
19. Ito, T., Kumazawa, K., Hamanaka, T., and Kasai, Y., Process of Producing Cordierite Honeycomb Structure. European Patent 514, 205, November 19, 1992.
20. Isupova, L.A., Sadykov, V.A., Solovyova, L.P., Andrianova, M.P., Ivanov, V.P., Kryukova, G.N., Kolomiichuk, V.N., Avvakumov, E.G., Pauli, I.A., Andryushkova, O.V., Poluboyarov, V.A., Rozovskii, A.Ya., and Tretyakov, V.F., Monolith perovskite catalysts of honeycomb structure for fuel combustion, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 637-645.
21. Yamanchi, H. and Ohashi, Y., Production of Sintered Ceramic, Japanese Patent 3,271,151, December 3, 1991.
22. Yamanchi, H. and Ohashi, Y., Production of Sintered Ceramic, Japanese Patent 3,271,152, December 3, 1991.
23. Rennebecks, K., Metallic or Ceramic Article Production by Moulding or Casting Film-Forming Material Containing Metals or Ceramic Raw Materials, German Offen. DE Patent 4,033,227, September 19, 1991.
24. Arai, K., Honeycomb Molded Body, Japanese Patent 3,242,227, October 29, 1991.
25. Kusuda, T. and Yonemura, M., Ceramic Structure for Purifying Exhaust Gas, Japanese Patent 3,258,347, November 18, 1991.
26. Scholl, D., Gabachuler, J.P., and Eckert, K.C., Porous Ceramic Moulding with Inlet and Outlet Ducts and Blind Cavities: Production by Impregnating Plastics Foam, Heating and Sintering and Use as, Patentschrift (Switzerland) CH Patent 679,394, February 14, 1992.
27. Richard, R., Zankl, W., and Tilmann, H., Process for the Production of Layered Structures of Fiber Reinforced Ceramic, European Patent 477,505, April 1, 1992.
28. Tsunoda, H., Araoka, M., and Kobayashi, T., Lithia-Containing Honeycomb Ceramics, and Their Manufacture, Japanese Patent 437,645, February 7, 1992.
29. Murano, Y., Hasegawa, K., Wade, S., Ikeda, Y., Ogawa, M., Sasaki, K., and Tagi, H., Heat-Resistant Inorganic Composition and Production of Porous Heat-Resistant Materials Using the Same, Japanese Patent 4,357,179, December 10, 1992.
30. Przeradzki, E., Manufacture of Ceramic Products, PL Patent 154356, November 29, 1991.
31. Blanco, J., Avila, P., Yates, M., and Bahamonde, A., The use of sepiolite in the preparation of titania monoliths for the manufacture of industrial catalysts, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 755-764.
32. 2, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 775-782.
33. Campanati, M., Fornasari, A., and Vaccari, A., Fundamentals in the preparation of heterogeneous catalysts, Catal. Today, 77, 299-314, 2003.
34. Katsuki, H., Kawahara, A., Ichinose, H., Furuta, S., and Nakao, H., Manufacture of High-Strength Porous Ceramics for Catalyst Supports and Filters, Japanese Patent 465,372, May 2, 1992.
35. Talc, in Encyclopedia of Chemical Technology, 3rd ed., Vol. 22, Wiley, New York, 1983, pp. 523-531.
36. Matsuo, Y., Takenchi, T., and Tamura, M., Ceramic Materials for Extrusion Molding and Process for Extrusion Molding of the Material, Japanese Patent 450,157, February 19, 1992.
37. Piderit, G.J., Toro, P.F., and Cordova, E., Cordierite: extrusion of raw material, Assoc. Bras. Ceram., 2, 631-639, 1991 (in Spanish).
38. Hegedus, A.G. and Han, J.H., Method for Fibre-Reinforced Ceramic Honeycomb, WO Patent 9,116,277, January 7, 1991.
39. Toshimi, K., Gas Adsorbent Element, WO Patent 9,116,971, November 14, 1991.
40. Shino, H. and Nara, A., Moulded Article of Ceramics and Production Thereof, Japanese Patent 4,175,278, June 23, 1992.
41. Myamoto, D., Oota, M., Ishikawa, K., Suketa, Y., and Kaji, T., Honeycomb Ceramic Laminated Desiccants and Their Manufacture, Japanese Patent 523,529, July 25, 1993.
42. Nishizawa, M. and Yamada, T., Metal Support of Catalytic Converter and Its Preparation, Japanese Patent 3,245,851, November 1, 1991.
43. Kamimura, F., Production of Metallic Catalyst, Japanese Patent 4,166,234, June 12, 1992.
44. Matsumoto, T., Catalytic Metal Carrier and Production Thereof, Japanese Patent 478,447, March 12, 1992.
45. Fukaya, M., Omura, K., and Yamanaka, M., Catalyst for Purification of Exhaust Gas and Made of Stainless Steel Foil Having Superior Reliability of Structure, Japanese Patent 4,156,945, May 29, 1992.
46. Yamaguchi, I. and Murotani, M., Formation of Alumina Film on Inorganic Substrate of Metal, Glass, Ceramics or the Like. Japanese Patent 3, 285,079, December 16, 1991.
47. Ito, N., Honeycomb-Shaped Catalyst Carrier, Japanese Patent 4,260,446, September 16, 1992.
48. Matsuda, S., Nehashi, K., Isemura, K., Endo, H., and Kobayashi, H., Hard Material Body, Japanese Patent 4,308,075, October 30, 1992.
49. Zwinkels, M.F.M., Järås, S.G., and Menon, P.G., Preparation of combustion catalysts by washcoating alumina whiskers-covered metal monoliths using a sol-gel method, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 85-94.
50. Tsang, C.M.T. and Bedford, R.E., Ceramic Coating for a Catalyst Support, U.S. Patent 5,114,901, Aug. 26, 1992.
51. Carty W.M. and Lednor, P.W., Monolithic ceramics and heterogeneous catalysts: honeycombs and foams, Curr. Opin. Solid State Mater. Sci., 1, 88-95, 1996.
52. Ahlström-Silversand A.F. and Odenbrand, C.U.I., Thermally sprayed wire-mesh catalysts for the purification of flue gases from small-scale combustion of bio-fuel. Catalyst preparation and activity studies, Appl. Catal. A, 153, 177-201, 1997.
53. Beers, A.E.W., Nijhuis, T.A., Kapteijn, F., and Moulijn, J.A., Zeolite coated structures for the acylation of aromatics, Microporous Mesoporous Mater., 48, 279-284, 2001.
54. Matatov-Meytal, Yu. and Sheintuch, M., Catalytic fibers and cloths, Appl. Catal. A, 231, 1-16, 2002.
55. Isupova, L.A., Sadykov, V.A., Tikhov, S.F., Kimkhai, O.N., Kovalenko, O.N., Kustova, G.N., Ovsyannikova, I.A., Dovbii, Z.A., Kryukova, G.N., Rozovskii A.Ya. et al., Monolith perovskite catalysts for environmentally benign fuels combustion and toxic wastes incineration, Catal. Today, 27, 249-256, 1996.
56. Gadkaree, K.P. and Jaroniec, M., Pore structure development in activated carbon honeycombs, Carbon, 38, 983-993, 2000.
57. 2, Appl. Catal. A, 209, 249-256, 2001.
58. Wahlberg, A., Pettersson, L.J., Bruce, K., Andersson, M., and Jansson, K., Preparation, evaluation and characterization of copper catalysts for ethanol fuelled diesel engines, Appl. Catal. B, 23, 271-281, 1999.
59. Ismagilov, Z.R., Khairulin, S.R., Shkrabina, R.A., Yashnik, S.A., Ushakov, V.A., Moulijn, J.A., and van Langeveld, A.D., Deactivation of manganese oxide-based honeycomb monolith catalyst under reaction conditions of ammonia decomposition at high temperature, Catal. Today, 69, 253-257, 2001.
60. Blanco, J., Avila, P., Suárez, S., Martín, J.A., and Knapp, C., Alumina-and titania-based monolithic catalysts for low temperature selective catalytic reduction of nitrogen oxides, Appl. Catal. B, 28, 235-244, 2000.
61. Tennison, S.R., Phenolic-resin-derived activated carbons, Appl. Catal. A, 173, 289-311, 1998.
62. Xanthopoulou, G. and Vekinis, G., Deep oxidation of methane using catalysts and carriers produced by self-propagating high-temperature synthesis, Appl. Catal. A, 199, 227-238, 2000.
63. Tyurkin, Yu.V., Luzhkova, E.N., Pirogova, G.N., and Chesalov, L.A., Catalytic oxidation of CO and hydrocarbons on SHS-prepared complex metal oxide catalysts, Catal. Today, 33, 191-197, 1997.
64. Twigg, M.V. and Richardson, J.T., Preparation and properties of ceramic foam catalyst supports, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 345-359.
65. Scholl, D., Gabathuler, J.P., Eckert, K.L., and Mizrah, T., Filter or Catalyst Carrier: Has Structured Flow Channels and Hollow Zones for Even Exhaust Gas Flow Without Loss of Pressure, CH Patent 680,788, November 13, 1992.
66. Goldsmith, R.L. and Bishop, B.A., Back-Flushable Filtration Device and Method of Forming and Using Same, U.S. Patent 5,114,581, May 19, 1992.
67. Groppi, G., Airoldi, G., Cristiani, C., and Tronconi, E., Characteristics of metallic structured catalysts with high thermal conductivity, Catal. Today, 60, 57-62, 2000.
68. Pereira, C.J. and Plumlee, K.W., Grace Camet_ metal monolith catalytic emission control technologies, Catal. Today, 13, 23-32, 1992.
69. Talo, A., Lahtinen, J., and Hautojärvi, P., An XPS study of metallic three-way catalysts:the effect of additives on platinum, rhodium, and cerium, Appl. Catal. B, 5, 221-231, 1995.
70. Igarashi, T. and Otani, T., Ceramic Coated Expanded Metal Body and Its Production, Japanese Patent 499,184, March 31, 1992.
71. Neeft, J.P.A., Catalytic Oxidation of Soot, Potential for the Reduction of Diesel Particulate Emission, Ph.D. thesis, Delft University of Technology, 1995.
72. 2 coatings on stainless steel, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 703-708.
73. Zwinkels, M.F.M., Järås, S.G., and Menon, P.G., Catalytic materials for high-temperature combustion, Catal. Rev. Sci. Eng., 35, 319-358, 1993.
74. Tikhov, S.F., Chernykh, G.V., Sadykov, V.A., Salanov, A.N., Alikina, G.M., Tsybulya, S.V., and Lysov, V.F., Honeycomb catalysts for clean-up of diesel exhausts based upon the anodic-spark oxidized aluminum foil, Catal. Today, 53, 639-646, 1999.
75. Wu, X., Weng, D., Xu, L., and Li, H., Tribocorrosion behavior of plasma nitrided Ti-6Al-4V alloy in neutral NaCl solution, Surf. Coat. Technol., 145, 226-232, 2001.
76. Yang, K.S., Jiang, Z., and Chung, J.S., Electrophoretically Al-coated wire mesh and its application for catalytic oxidation of 1,2-dichlorobenzene, Surf. Coat. Technol., 168, 103-110, 2003.
77. Xu, X., Vonk, H., Cybulski, A., and Moulijn, J.A., Alumina washcoating and metal deposition of ceramic monoliths, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 1069-1078.
78. Kolb, W.B., Papadimitriou, A.A., Cerro, R.L., Leavitt, D.D., and Summers, J.C., The ins and outs of coating monolithic structures, Chem. Eng. Prog., 89, 61-67, 1993.
79. Mizushima, Y. and Hori, M., Manufacture of Alumina Porous Materials for Thermal-Resistant Catalysts, Japanese Patent 543,344, February 23, 1993.
80. Gonzalez, R.D., Supported Bimetallic Cluster, Catalysis by Design, Proceedings of AIChE 1992 Annual Meeting, Miami Beach, FL, 1992, paper 46f.
81. Gonzalez, R.D. and Balakrishnan, K., Preparation of Alumina-Supported Bimetallic Pt-Re and Pt-Ir Catalysts by the Sol-Gel Method, Proceedings of AIChE 1992 Annual Meeting, Miami Beach, FL, 1992, paper 49a.
82. Brinker, C.J. and Scherer, G.W., Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing, Academic Press, Boston, MA, 1990.
83. Iler, R.K., The Chemistry of Silica, Wiley, New York, 1979.
84. Chorley, R.W. and Lednor, P.W., Synthetic routes to high surface-area nonoxide materials, Adv. Mater., 3, 474-485, 1991.
85. Sakka, S. and Yoko, T., Organometallic-derived ceramics, Ceram. Int., 17, 217-225, 1991.
86. Sakka, S. and Yoko, T., Ceramurgia, 21, 24-31, 1991 (in Italian).
87. Mizushima Y. and Hori, M., Production of Porous Ceramics of Alumina System, Japanese Patent 406,180, January 10, 1992.
88. Spiccia, L., West, B.O., Cullen, J., De Villiers, D., Watkins, I., Bell, J.M., Ben-Nissan, B., Anast, M., and Johnston, G., Sol-gel precursor chemistry, Key Eng. Mater., 53-55, 445-450, 1991.
89. Akiba, T., Mulite, Shinsozai, 3, 45-50, 1992 (in Japanese).
90. Klein, L.C., Yu, C., Woodman, R., and Pavilik, R., Microporous oxides by the sol-gel process:synthesis and applications, Catal. Today, 14, 165-173, 1992.
91. Vonk, H., Preparation and Characterization of Monolithic Catalysts, M.Sc. thesis, Delft University of Technology, 1994.
92. Kessler, V.G., Turevskaya, E.P., Kucheiko, S.I., Kozlova, N.I., Turevskaya, E.P., Obvintseva, I.E., and Yanovskaya, M.I., The alkoxides of molebdenum, tungsten and vanadium and their hydrolysis products, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 3-14.
93. Acosta, S., Arnal, P., Corriu, R.J.P., Leclercq, D., Mutin, P.H., and Vioux, A., A general nonhydrolysis sol-gel route to oxides, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 43-54.
94. Collina, D., Fornasari, G., Rinaldo, A., Trifiro, F., Leofanti, G., Paparatto, G., and Petrini, G., Silica preparation via sol-gel method: a comparison with ammoximation activity, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 401-410.
95. Luo, S., Gui, L., Fu, X., and Tang, Y., Titania-alumina composites, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 445-450.
96. Chu, L., Tejedor-Tejedor, M.I., and Anderson, M.A., Microporous silica gels from alkylsilicate-water two phase hydrolysis, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 855-860.
97. Logan, M.N., Prabakar, S., and Brinker, C.J., Sol-gel-derived silica films with tailored microstructures for applications requiring organic dyes, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds. Material Research Society, Pittsburgh, PA, 1994, pp. 115-120.
98. 2 studied by Fourier transform infrared spectroscopy, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds. Material Research Society, Pittsburgh, PA, 1994, pp. 715-720.
99. Marella, M., Tomaselli, M., Meregalli, L., Battagliarin, M., Gerontopoulos, P., Pinna, F., Signoretto, M., and Strukul, G., Sol-gel zirconia spheres for catalytic applications, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 327-335.
100. Anderson M.A. and Xu, Q., Process of Making Porous Ceramic Materials With Controlled Porosity, WO Patent 9,219,369, July 13, 1993.
101. Abe Y. and Hosono, H., Porous Titania Ceramics and Production Thereof and Titania Sensor Using These Ceramics, Japanese Patent 426,573, January 29, 1992.
102. 2 catalysts and supports, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 461-470.
103. 2 aerogels by sol-gel methods, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 471-478.
104. 2 by the sol-gel method, Yop Hakhoechi, 27, 625-630, 1990 (in Korean).
105. 2 catalysts, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 685-690.
106. Yanovskaya, M.I., Kotova, N.M., Obvintseva, I.E., Turevskaya, E.P., Turevskaya, E.P., Vorotilov, K.A., Solov’yova, L.I., and Kovsman, E.P., Preparation of powders and thin films of complex oxides from metal alkoxides, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 15-20.
107. Beers, A.E.W., Nijhuis, T.A., Aalders, N., Kapteijn, F., and Moulijn, J.A., BEA coating of structured supports: performance in acylation, Appl. Catal. A, 243, 237-250, 2003.
108. x with hydrocarbons, Appl. Catal. B, 19, 127-135, 1998.
109. Agrafiotis, C. and Tsetsekou, A., The effect of powder characteristics on washcoat quality:I: Alumina washcoats, J. Eur. Ceram. Soc., 20, 815-824, 2000.
110. Agrafiotis, C. and Tsetsekou, A., The effect of powder characteristics on washcoat quality:II: Zirconia, titania washcoats: multilayered structures, J. Eur. Ceram. Soc., 20, 825-834, 2000.
111. García-Bordejé, E., Kapteijn, F., and Moulijn, J.A., Preparation and characterisation aspects of carbon-coated monoliths, Catal. Today, 69, 357-363, 2001.
112. García-Bordejé, E., Kapteijn, F., and Moulijn, J.A., Preparation and characterization of carbon-coated monoliths for catalyst supports, Carbon, 40, 1079-1088, 2002.
113. Crezee, E., Tjon Joen Sjong, C.S., Kapteijn, F., and Moulijn, J.A., Preparation and Characterization of Carbon Coated Monolithic Catalysts, Proceedings of Carbon 2001, Lexington, KY, July 14-19, 2001.
114. De Jong, K.P. and Geus, J.W., Catalytic carbon nanofibers: catalytic synthesis and applications, Catal. Rev. Sci. Eng., 42, 481-510, 2000.
115. Jarrah, N., van Ommen, J.G., and Lefferts, L., Development of monolith with a carbonnanofiber-washcoat as a structured catalyst support in liquid phase, Catal. Today, 79-80, 29-33, 2003.
116. Cybulski, A. and Trawczyński, J., Catalytic wet air oxidation of wastewater over platinum based catalysts, Appl. Catal. B, 47, 1-13, 2004.
117. Kułażyński, M., Trawczyński, J., and Radomyski, B., Monolithic Carbon Catalysts for Gas Desulfurization, Europacat-II, September 3-8, 1995, book of abstracts 298.
118. Trawczyński, J. and Kułażyński, M., Active carbon monoliths as catalyst supports for SCR (selective catalytic reduction) of nitric oxide with ammonia, in Proceedings of the 8th International Conference on Coal Science, Pajares, J.A. and Tascon, J.M.D., Eds., Elsevier, Amsterdam, 1995, s. 1803.
119. DeLiso, E.M., Gadkaree, K.P., Mach, J.P., and Streicher, K.P., Carbon-Coated Inorganic Substrates, U.S. Patent 5,451,444, August 3, 1994.
120. DeLiso, E.M., Gadkaree, K.P., Mach, J.P., and Streicher, K.P., Carbon-Coated Inorganic Substrates, U.S. Patent 5,597,617, January 28, 1997.
121. Yates, M., Blanco, J., Avila, P., and Martin, M.P., Honeycomb monoliths of activated carbon for effluent gas purification, Microporous Mesoporous Mater., 37, 201-208, 2000.
122. Valdes-Solis, T., Marban, G., and Fuertes, A.B., Preparation of microporous carbon-ceramic cellular monoliths, Microporous Mesoporous Mater., 43, 113-126, 2001.
123. Yates, M., Blanco, J., Martin-Luengo, M.A., and Martin, M.P., Vapour adsorption capacity of controlled porosity honeycomb monoliths, Microporous Mesoporous Mater., 65, 219-231, 2003.
124. Gadkaree, K.P. and Mach, J.P., Method of Making Activated Carbon Honeycombs Having Varying Adsorption Capacities, U.S. Patent 5,510,063, April 23, 1996.
125. Gadkaree, K.P., Carbon honeycombs structures for adsorption applications, Carbon, 36, 981-989, 1998.
126. Gadkaree, K.P., Method of Making Activated Carbon Bodies Having Improved Adsorption Properties, U.S. Patent 6,187,713, February 13, 2001.
127. Schmieg, S.J. and Belton, D.N., Effect of hydrothermal aging on oxygen storage-release and activity in a commercial automotive catalyst, Appl. Catal. B, 6, 127-144, 1995.
128. Evaldsson, L., Löwendahl, L., and Otterstedt, J.-E., Fibrillar alumina as a wash-coat on monoliths in the catalytic oxidation of xylene, Appl. Catal. A, 55, 123-136, 1989.
129. Zhao, X. and Jing, J., Preparation and characterization of a platinum containing catalytic membrane, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 949-955.
130. Löwendahl, L., Lin, P.-Y., Skoglundh, M., Ottkrstedt, J.-E., Dahl, L., Nygren, M., Jansson, K., and Otterstedt, J.-E., Catalytic purification of car exhaust over cobalt-and copper-based metal oxides promoted with platinum and rhodium, Appl. Catal. B, 6, 237-254, 1995.
131. Aoki, I., Matsui, T., Imai, T., and Horiishi, N., Manufacture of Iron Oxide Catalyst for Gas Treatment, Japanese Patent 5,177,138, July 20, 1993.
132. Aoki, I., Matsui, T., Imai, T., and Horiishi, N., Preparation of Iron Oxide Catalyst for Gas Treatment, Japanese Patent 5,177,139, 1993.
133. Xu, X., Vonk, H., van de Riet, A.C.J.M., Cybulski, A., Stankiewicz, A., and Moulijn, J.A., Monolithic catalysts for selective hydrogenation of benzaldehyde, Catal. Today, 30, 91-97, 1996.
134. Knijff, L.M., Bolt, R.H., van Yperen, R., van Dillen, A.J., and Geus, J.W., Production of nickel-alumina catalysts from preshaped support bodies, in Preparation of Catalysts V, Delmon, B., Grange, P., Jacobs, P., and Poncelet, G., Eds., Elsevier, Amsterdam, 1991, pp. 165-174.
135. De Jong, K.P., Deposition precipitation onto preshaped carrier bodies. Possibilities and limitations, in Preparation of Catalysts V, Delmon, B., Grange, P., Jacobs, P., and Poncelet, G., Eds., Elsevier, Amsterdam, 1991, pp. 19-36.
136. Zwinkels, M., High-Temperature Catalytic Combustion, Ph.D. thesis, Royal Institute of Technology, Stockholm, 1996.
137. Hu, Z., Wan, C.Z., Lui, Y.K., Dettling, J., and Steger, J.J., Design of a novel Pd three-way catalyst: integration of catalytic functions in three dimensions, Catal. Today, 30, 83-89, 1996.
138. Vergunst, Th., Kapteijn, F., and Moulijn, J.A., Monolithic catalysts: non-uniform active phase distribution by impregnation, Appl. Catal. A, 213, 179-187, 2001.
139. Oyama, S.T. and Dhandapani, B., Gas phase ozone decomposition catalysts, Appl. Catal. B, 11, 129-166, 1997.
140. Wahlberg, A., Pettersson, L.J., Bruce, K., Andersson, M., and Jansson, K., Preparation, evaluation and characterization of copper catalysts for ethanol fuelled diesel engines, Appl. Catal. B, 23, 271-281, 1999.
141. Cimino, S., Di Benedetto, A., Pirone, R., and Russo, G., Transient behaviour of perovskitebased monolithic reactors in the catalytic combustion of methane, Catal. Today, 69, 95-103, 2001.
142. Agrafiotis, C., Tsetsekou, A., Stournaras, C.J., Julbe, A., Dalmazio, L., and Guizard, C., Evaluation of sol-gel methods for the synthesis of doped-ceria environmental catalysis systems: I. Preparation of coatings, J. Eur. Ceram. Soc., 22, 15-25, 2002.
143. Seijger, G.B.F., Palmaro, S.G., Krishna, K., van Bekkum, H., van den Bleek, C.M., and Calis, H.P.A., In situ preparation of ferrierite coatings on structured metal supports, Microporous Mesoporous Mater., 56, 33-45, 2002.
144. Seijger, G.B.F., van den Berg, A., Riva, R., Krishna, K., Calis, H.P.A., van Bekkum, H., and van den Bleek, C.M., In situ preparation of ferrierite coatings on cordierite honeycomb supports, Appl. Catal. A, 236, 187-203, 2002.
145. Shan, Z., van Kooten, W.E.J., Oudshoorn, O.L., Jansen, J.C., van Bekkum, H., van den Bleek, C.M., and Calis, H.P.A., Optimization of the preparation of binderless ZSM-5 coatings on stainless steel monoliths by in situ hydrothermal synthesis, Microporous Mesoporous Mater., 34, 81-91, 2000.
146. Jansen, J.C., Kashchiev, D., and Erdem-Senatalar, A., Preparation of coating of molecular sieve crystals for catalysis and separation applications, in Advanced Zeolite Sciences and Applications, Studies in Surface Science and Catalysis, Vol. 85, Jansen, J.C., Stöcker, M., Karge, H.G., and Weitkamp, J., Eds., Elsevier, Amsterdam, 1994, pp. 215-250.
147. Van Bekkum, H., Geus, E.R., and Kouwenhoven, H.W., Supported zeolite systems and applications, in Advanced Zeolite Sciences and Applications, Studies in Surface Science and Catalysis, Vvol. 85, Jansen, J.C., Stöcker, M., Karge, H.G., and Weitkamp, J., Eds., Elsevier, Amsterdam, 1994, pp. 509-542.
148. Geus, E.R., Inorganic Zeolite Membranes, Ph.D. thesis, Delft University of Technology, 1993.
149. Wang, A., Liang, D., Xu, C., Sun, X., and Zhang, T., Catalytic reduction of NO over in situ synthesized Ir/ZSM-5 monoliths, Appl. Catal. B, 32, 205-212, 2001.
150. Lachman, I.M. and Williams, J.L., Extruded monolithic catalyst supports, Catal. Today, 14, 317-329, 1992.
151. Del Valle, J.O., Matrinez, L.S., Baum, B.M., and Galeano, V.C., Pilot plant development of a new catalytic process for improved electrostatic separation of fly-ash in coal fired power plants, Prace Naukowe Instytutu Chemii i Technologii Nafty i Wegla Politechniki Wroclawskiej, 55 (Catalysis and Adsorption in Fuel Processing and Environmental Protection), 43-55, 1996.
152. De Lathouder, K.M., Kapteijn, F., and Moulijn, J.A., Monolithic Bioreactor for Enzymatic Reactions, Proceedings of the 1st International Congress on Bioreactor Technology in Cell, Tissue, Culture and Biomedical Applications, Temple, Finland, July 14-18, 2003.
153. Strancar, A., Barut, M., Podgornik, A., Koselj, P., Schwinn, H., Raspor, P., and Josic, D., Application of compact porous tubes for preparative isolation of clotting factor VIII from human plasma, J. Chromatogr. A, 760, 117-123, 1997.
154. Berruex, L.G., Freitag, R., and Tennikova, T.B., Comparison of antibody binding to immobilized group specific affinity ligands in high performance monolith affinity chromatography, J. Pharm. Biomed. Anal., 24, 95-104, 2000.
155. Podgornik, H. and Podgornik, A., Characteristics of LiP immobilized to CIM monolithic supports, Enzyme Microbiol. Technol., 31, 855-861, 2002.
156. Vodopivec, M., Podgornik, A., Berovic, M., and Štrancar, A., Characterization of CIM monoliths as enzyme reactors, J. Chromatogr. B, 795, 105-113, 2003.
157. Ochoa, R. and Miranda, R., Sol-gel preparation and characterization of niobia thin films for catalytic sensor applications, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 553-558.
158. Petrich, M.A., Coating amorphous films, CHEMTECH, Dec., 740-745, 1989.
159. Chin, J., Application of vapor deposition technology to the development of ceramic matrix composite, in Fiber Reinforced Ceramic Composites, Mazdiyasni, K.S., Ed., Noyes, Park Ridge, NJ, 1990, 342-396.
160. Moore, A.W., Facility for continuous CVD coating of ceramic fibres, Mater. Res. Soc. Symp. Proc., 250, 269-274, 1992.
161. Köhler, S., Reiche, M., Frobel, C., and Baerns, M., Preparation of catalysts by chemical vapor-phase deposition and decomposition on support materials in a fluidised-bed reactor, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 1009-1016.
162. Lin, Y.S. and Burggraaf, A.J., Modelling and analysis of CVD processes in porous media for ceramic composite preparation, Chem. Eng. Sci., 46, 3067-3080, 1991.
163. Shibao, R.K., Srdanov, V.I., Hay, M., and Eckert, H., Plasma enhanced chemical vapor deposition of silicon sulfide and phosphorus sulfide thin films, in Better Ceramic Through Chemistry VI, Cheetham, A.K., Brinker, C.J., Mecartney, M.L., and Sanchez, C., Eds., Material Research Society, Pittsburgh, PA, 1994, pp. 587-592.
164. Moene, R., Application of Chemical Vapour Deposition in Catalyst Design, Ph.D. thesis, Delft University of Technology, 1995.
165. Moene, R., Kramer, L.F., Schoonman, J., Makkee, M., and Moulijn, J.A., Conversion of activated carbon into porous silicon carbide by fluidised bed chemical vapour deposition, in Preparation of Catalysts VI, Poncelet, G., Martens, J., Delmon, B., Jacobs, P.A., and Grange, P., Eds., Elsevier, Amsterdam, 1995, pp. 371-380.
166. Naslain, R., CIV composites, in Ceramic Matrix Composites, Warren, R., Ed., Blackie Academic and Professional, U.K., 1992, pp. 199-244.
167. Evans, J.W. and Gupta, D., A mathematical model for microwave-assisted chemical vapor infiltration, Mater. Res. Soc. Symp. Proc.,, 189, 101-107, 1991.
168. Schohest, T.L., Plasma-aided manufacturing, IEEE Trans. Plasma Sci., 19, 725-733, 1991.
169. Harada, Y. Recent development of thermal spraying technology and its applications, Nippon Kinzoku Gakkai Kaiho, 31, 413-421, 1992 (in Japanese).
170. Kurita, M. and Toyama, K., Starter, Japanese Patent 4,255,569, July 27, 1992.
171. Kubo, O. and Kawai, M., Plasma spraying application to ceramic catalyst-carrier, Jidosha Gijutsu, 47, 70-74, 1993 (in Japanese).
172. Kagawa, S., Ceramic Melt-Sprayed Body and Measuring Method for Its Porosity, Japanese Patent 419,541, January 23, 1992.
173. Metaxas, A.C. and Binner, J.G.P., Microwave processing of ceramics, in Advanced Ceramic Processing and Technology, Vol. 1, Binner, J.G.P., Ed., Noyes, Park Ridge, NJ, 1990, pp. 285-367.
174. Cominos, V. and Gavriilidis, A., Preparation of axially non-uniform Pd catalytic monoliths by chemical vapour deposition, Appl. Catal. A, 210, 381-390, 2001.