Transformer design principles: With applications to core-form power transformers

Transformer Design Principles: With Applications to Core-Form Power Transformers

Volumn , Issue , 2001, Pages 1-599

  Del Vecchio, Robert M ^a,b   Poulin, Bertrand ^a   Feghali, Pierre T ^c   Shah, Dilipkumar M ^d   Ahuja, Rajendra ^a,d  

^a Waukesha Electric Systems ^*

^b Waukesha Electric Systems   (United States)

^c Waukesha Electric Systems   (United States)

^d North American Transformer   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056073725     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (64)

1. M. Abramowitz and I. A. Stegun, Editors, "Handbook of Mathematical Functions", Dover Publications, Inc., New York, 1972.
2. [Ansoft] MAXWELL~ is a product of Ansoft Corp., Four Station Square, Suite 660, Pittsburgh, PA 15219-1119.
3. J. Aubin and Y. Langhame, "Effect of Oil Viscosity on Transformer Loading capability at Low Ambient Temperatures", IEEE Trans. on Power Delivery, Vol. 7, No. 2, pp. 516-524, April 1992.
4. W. R. Bell, "Influence of Specimen Size on the Dielectric Strength of Transformer Oil", Trans. Elect. Insul., Vol. EI-12, No. 4, Aug. 1977, pp. 281-292.
5. L. F. Blume, A. Boyajian, G. Camilli, T. C. Lennox, S. Minneci, and V. M. Montsinger, "Transformer Engineering", 2ndEdition, John Wiley & Sons, Inc., New York, 1951.
6. A. K. Bose, "Dynamic Response of Windings Under Short Circuit", CIGRE International Conference on Large High Tension Electric Systems, 1972 Session, Aug. 28-Sept. 6, 1972.
7. R. V. Churchill, "Complex Variables and Applications", 2nd Edition, McGraw-Hill Book Co., Inc., New York, 1960.
8. F. M. Clark, "Insulating Materials for Design and Engineering Practice", John Wiley & Sons, Inc. New York, 1962.
9. J. E. Clem, "Equivalent Circuit Impedance of Regulating Transformers", A.I.E.E. Transactions, Vol. 58, 1939, pp. 871-873.
10. S. Cygan and J. R. Laghari, "Dependence of the Electric Strength on Thickness Area and Volume of Polypropylene", IEEE Trans. on Elect. Insul., Vol. EI-22, No. 6, Dec. 1987, pp. 8357837.
11. J. W. Daily and D. R. F. Harleman, "Fluid Dynamics", Addison-Wesley Publishing Co., Inc., Reading, Mass., 1973.
12. M. G. Danikas, "Breakdown of Transformer Oil", IEEE Electrical Insulation Magazine, Sept./Oct. 1990, Vol. 6, No. 5, pp. 27-34.
13. R. M. Del Vecchio, "MagnetostaticsH, Encyclopedia of Applied Physics, Vol. 9, VCH Publishers, Inc., 1994, pp. 207-227.
14. R. M. Del Vecchio, B. Poulin, and R. Ahuja, "Calculation and Measurement of Winding Disk Capacitances with Wound-in-ShieldsH, IEEE Trans. on Power Delivery, Vol. 13, No. 2, April 1998, pp. 503-509.
15. R. M. Del Vecchio and P. Feghali, "Thermal Model of a Disk Coil with Directed Oil Flow", 1999 IEEE Transmission and Distribution Conference, Now Orleans, LA, 11-16 April, 1999, pp. 914-919.
16. R. J. Duffin, E. L. Peterson, and C. Zener, "Geometric Programming", Wiley, NY, 1967.
17. H. B. Dwight, "Tables of Integrals and Other Mathematical Data", 4' Edition, The MacMillan Co., New York, 1961.
18. C. Eastgate, "Simplified steady-state thermal calculations for naturally cooled transformers", Proc. IEE, Vol. 112, No. 6, pp. 1127-1134, June 1965.
19. H. S. Endicott and K. H. Weber, "Electrode Area Effect for the Impulse Breakdown of Transformer Oil", Trans. IEEE, Aug. 1957, pp. 393-398.
20. [For691 J. A. C. Forrest and R. E. James, Patent no. 1,158,325, "Improvements in or relating to Windings for Inductive Apparatus", The patent Office, London, July 16,1969.
21. M. A. Franchek and T. A. Prevost, EHV Weidmann, private communication.
22. P. E. Gill, W. Murray, and M. H. Wright, "Practical Optimization", Academic Press, NY, l98 1.
23. G. H. Golub and C. F. Van Loan, "Matrix Computations", Second Edition, The Johns Hopkins University Press, Baltimore and London, 1989.
24. F. W. Grover, "Inductance Calculations", Dover Publications, Inc., New York, N.Y., Special edition prepared for the Instrument Society of America, 1973.
25. E. J. Gumbel, "Statistics of Extremes", Columbia University Press, New York, 1958.
26. NY in UHV Transformers", IEEE PES winter meeting, New York, Jan. 26-31, 1975.
27. TP of Transformer Windings Under Short-circuit Conditions", Paper 71 8-PWR, paper presented at the IEEE Winter Power Meeting, New York, N.Y., Jan 31-Feb. 5, 1971
28. J. E. Hobson and W. A. Lewis, "Regulating Transformers in Power-System Analysis", A.I.E.E. Transactions, Vol. 58, 1939, pp. 874-886.
29. Lawrence P. Huelsman, "Basic Circuit Theory with Digital Computations", Prentice-Hall, Inc., Englewood Cliffs, NJ, 1972.
30. − with 55 OC or 65 'C Average Winding Rise", ANSI 1 LEEE 257.92 l98 1.
31. [Kau68] R. B. Kaufman and J. R. Meador, "Dielectric Tests for EHV Transformers", IEEE Trans. on PAS, Vol. PAS-87, No. I, Jan. 1968, pp. 135-145.
32. J. A. Kok, "Electrical Breakdown of Insulating Liquids", Interscience Publishers, Inc., New York, 1961.
33. A. Kramer and J. Ruff, "Transformers for Phase Angle Regulation Considering the Selection of On-Load Tap-Changers", IEEE Transactions on Power Delivery, Vol. 13, No. 2, April 1998, pp. 518-525.
34. E. Kuffel and W. S. Zaengl, "High Voltage Engineering", Pergamon Press, New York, 1988.
35. J. Lammeraner and M. Stafl, "Eddy Currents", Iliffe Books, Ltd., London, 1966.
36. W. V. Lyon, "Applications of the Method of Symmetrical Components", MC Graw-Hill Book Co., Inc., N.Y., 1937.
37. − presented at the IEEERES Summer Meeting, San Diege, CA, July 28 Aug. 1, 1991.
38. [Mik78] A. Miki, T. Hosoya, and K. Okuyama, "A calculation Method for Impulse Voltage Distribution and Transferred Voltage in Transformer Windings", IEEE Trans. on PAS, Vol. PAS-97, No. 3, MayIJune, 1978, pp. 930-939.
39. H. P. Moser, "Transformerboard", Special print of Scientia Electrica, 1979.
40. [Mos87] H. P. Moser and V. Dahinden, "Transformerboard 11", H. Weidlnann AG, Ch-8640, Rapperswil, Switzerland, 1987.
41. J. K. Nelson, "An Assessment of the Physical Basis for the Application of Design Criteria for Dielectric Structures", IEEE Trans. on Elect. Insul., Vol. 24, No. 5, Oct. 1989, pp. 835-847.
42. E. T. Norris, "The Lightening strength of Power Transformers", J. Inst. Elect. Engr., Vol. 95, 1948, pp. 389-406.
43. A. J. Oliver, "Estimation of transformer winding temperatures and coolant flows using a general network method, IEE Proc., Vol. 127, Pt. C, NO. 6, pp. 395-405, NOV.1980.
44. R. M. Olson, "Essentials of Engineering Fluid Mechanics", 4' Edition, Harper & Row Publishers, N. Y., 1980.
45. S. Palmer and W. A. Sharpley, "Electric Strength of Transformer Insulation", Proc. IEE, Vol. 116, 1969, pp. 1965-1973.
46. [Pat801 M. R. Patel, "Dynamic stability of helical and barrel coils in transformers against axial short-circuit forces", IEE Proc., Vol. 127, Pt. C, No. 5, Sept., 1980, pp 281-284.
47. D. Pavlik, D. C. Johnson, and R. S. Girgis, "Calculation and Reduction of Stray and Eddy Losses in Core-Form Transformers Using a Highly Accurate Finite Element Technique", IEEE Trans, on Power Delivery, Vol. 8, No. 1, January, 1993.
48. L. W. Pierce, "An Investigation of the Thermal Performance of an Oil Filled Transformer Winding", IEEE Trans, on Power Delivery, Vol. 7, NO. 3, pp. 1347-1358, July 1992.
49. [Pie92a] L. W. Pierce, "Predicting Liquid Filled Transformer Loading Capability", IEEE / IAS Petroleum and Chemical Industry Technical Conference, San Antonio, TX, Sept. 28-30, 1992.
50. R. H. Pry and C. P. Bean, "Calculation of the Energy Loss in Magnetic Sheet Materials Using a Domain Model", J. Appl. Phys., Vol 29, No. 3, 1958, pp. 532-533.
51. L. Rabins, "Transformer Reactance Calculations with Digital Computers", AIEE Trans., Vol. 75 Pt. I, July 1956, pp. 261-267.
52. W. M. Rohsenow, J. P. Hartnett, and E. N. Ganic, Editors, "Handbook of Heat Transfer Fundamentals", 2nd Edition, McGraw-Hill Book Co., N. Y., 1985.
53. R. Rudenberg, "Performance of Traveling Waves in Coils and Windings", Trans. ofthe A.I.E.E., Vol. 59, 1940, pp. 1031-1040.
54. R. Rudenberg, "Electrical Shock Waves in Power Systems", Harvard University Press, Cambridge, Mass., 1968.
55. G. M. Stein, "A Study of the Initial Serge Distribution in Concentric Transformer Windings", IEEE Trans. on PAS, Vol. PAS-83, Sept. 1964, pp. 877-893.
56. [Ste72] R. B. Steel, W. M. Johnson, J. J. Narbus, M. R. Patel, and R. A. Nelson, "Dynamic Measurements in Power Transformers Under Short-Circuit Conditions", International Conference on Large High Tension Electric Systems, CIGRE, 1972 Session, Aug. 28-Sept. 6, 1972.
57. E. D. Taylor, B. Berger, and B. E. Western, "An Experimental Approach to the Cooling of Transformer Coils by Natural Convection", IEE, Paper No. 2505 S, April 1958.
58. [Tim70] S. P. Timoshenko and J. N. Goodier, "Theory of Elasticity", 3 Edition, MC Graw-Hill Book Co., N.Y., 1970.
59. N. Giao Trinh, C. Vincent, and J. Regis, "Statistical Dielectric Degradation of Large-Volume Oil-Insulation", IEEE Trans, on Power Apparatus and Systems (PAS), Vol. PAS-101, No. 10, Oct. 1982, pp. 3712-3721.
60. M. Waters, "The Short-Circuit Strength of Power Transformers", Macdonald & Co. (Publishers) Ltd., London, 1966.
61. K. H. Weber and H. S. Endicott, "Area Effect and its Extremal Basis for the Electric Breakdown of Transformer Oil", AIEE Transactions, June, 1956, pp. 37 1-381.
62. [Wes64] Central Station Engineers of the Westinghouse Electric Corp., E. Pittsburgh, PA, "Electrical Transmission and Distribution Reference Book", Westinghouse Electric Corp., E. Pittsburgh, PA, 1964.
63. W. R. Wilson, "A Fundamental Factor Controlling the Unit Dielectric Strength of Oil", AIEE Trans. on PAS, Vol. 72, Feb. 1953, pp. 68-74.
64. [Wi167] D. J. Wilde and C. S. Beightler, "Foundations of Optimization", Prentice-Hall, Inc., Englewood Cliffs, N. J., 1967.