Hydraulics of spillways and energy dissipators

Hydraulics of Spillways and Energy Dissipators

Volumn , Issue , 2004, Pages 1-650

  Khatsuria, R M ^a  

^a Krutarth Society   (India)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056065863     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (520)

1. Moric, P. ‘Questioning the need for spillways’, International Water Power & Dam Construction, January, 1997.
2. Mriouah, D. ‘Crues Importantes imprevues: cas du barrage de Oued el Makhazine all Maroc’, Q-63, R-82 Proc. 16th ICOLD. San Francisco, June 1988.
3. Takasu, S.; Yamaguchi, J. ‘Principle for selecting type of spillway for flood control dams in Japan’, Q-63, R-19, Q-63, R-82 Proc. 16th ICOLD, 1988.
4. ‘Seminar on Safety Evaluation of Existing Dam for Foreign Engineers – History of Dam Safety Development in the U.S.’ USBR, 1983.
5. Vischer, D.; Rutschmann, P. ‘Spillway facilities – Typology and General Safety Questions’, Q-63, R-23, Proc. 16th ICOLD:. San Francisco, June, 1988.
6. Regan, R. P. Comments on the paper- Cavitation and erosion damage of sluices and stilling basins at two high-head dams- 13th ICOLD, New Delhi, 1979; Vol. V, 580.
7. Semenkov, V. M. General Report on Q 50- Large capacity outlets and spillways, 13th ICOLD, New Delhi, 1979; Vol. V, 94.
8. Design of Small Dams, United States Bureau of Reclamation. USBR, USA, 1960.
9. Chow, V. T.; Maidment, D. R.; Mays, L. W. Applied Hydrology; McGraw-Hill, New York, 1988.
10. Creager, W. P.; Justin, J. D.; Hinds, J. Engineering for Dams; John Wiley & Sons, New York, 1944; Vol. 1.
11. Cudworth, A. G. Flood Hydrology Manual – A Water Resources Technical Publication, USBR; Denver, USA, 1989.
12. Desai, N. B.; Rao, S. G. V.; Mathew, N. T. Estimation of probable maximum flood in the Narmada at Sardar Sarovar, 41st Annual Research and Development Session, CBI&P, Vol. 2-Hydraulics, Vadodara, India, 1984.
13. Duband, D.; Michel, C.; Garros, H.; Astier, J. Estimating exteme value floods and the design flood by the Gradex method – ICOLD, 16th Congress; San Francisco, USA, 1988; Vol. 4, Q 63, R 60.
14. Francou, J.; Rodier, J. A. Tentative classification of maximum observed floods, Proc. Leningred Symposium on floods and their computation, UNESCO, 1967.
15. Garde, R. J. Floods and Flood Control : Engineering Approach, Memoir Geological Society of India, No.41, 1998, 173–193.
16. ICOLD. Selection of Design Flood – Current Methods Bulletin 82, 1992.
17. Myers, V. A. Meteorological estimation of extreme precipitation for spillway design floods. Weather Bureau Technical Memorandum WBTM Hydro-5, 1967.
18. Raudkivi, A. Hydrology; Pergamon Press, Oxford, 1979.
19. Singh, V. P. Rainfall – Runoff relationships, Water Resources Publication, 1982.
20. Singh, V. P. Hydrologic Systems – Watershed Modelling; Prentice Hall, New Jersey, 1989; Vol. 2, 237–254.
21. Snyder, F. F. Synthetic unit Graphs _ Trans. American Geophysics Union, Part I, 1938.
22. United States Bureau of Reclamation Design of Small Dams, Revised Edition, 1987.
23. USGS Flood frequency analysis – Manual of Hydrology, Part 3, Flood flow techniques, USGS Water supply paper 1543, 1960, 11–25.
24. US Army Corps of Engineers HEC-1 – Flood Hydrograph Package 723-X6-L-2010, 1990.
25. World Meterological Organisation Manual for estimation of probable maximum precipitation, Operation Hydrology Report No.1, WMO – 332, 1986.
26. Afshar, A.; Marino, M. A. Determining optimum spillway capacity based on estimated flood distribution – International Water Power and Dam Construction, January 1990.
27. ASCE Evaluation procedures for hydrologic safety of dams – A report of Task Committee on spillway design flood selection, 1988.
28. Balcerski, W.; Bolesta, S. Evaluation de debits maxima pour le dimensionnement d’ouvrages des crues dans les barrages, CIGB, 9th Congress. Istanbul, 1967.
29. Bergstrom, S.; Ohlsson, P. E. Towards new guidelines on spillway design in Sweden – ICOLD 16th Congress, Q 63, RG7; San Francisco, USA, 1988.
30. Biedermann, R. Safety of Swiss dams against floods – design criteria and design flood – Q 63, R 22; San Francisco, USA, 1988.
31. Bouvard, M. C. Design flood and operational flood control – General Report, ibid, 1988.
32. Broza, V. Q 63, R 42
33. San Francisco, USA, 1988.
34. Cantwell, B. L.; Murley, K. A. Design flood guidelines, Australia – Q 63, R 15
35. San Francisco, USA, 1988.
36. CIGB 11th Congress; Madrid, Spain, 1973; Vol. 2, Q 41, R8.
37. Delgrado, G. J. Basic criteria for sizing large dam spillways – ICOLD 16th Congress, Q.63, R 65; San Francisco, USA, 1988.
38. Fahlbusch, F. E. Optimum design flood for spillways – International Water Power and Dam Construction, 1979, 79–84.
39. Gole, C. V.; Krishnamurthy, K. Evaluation and criteria for spillway design flood and adequacy in relation to safety of dams, ICOLD, 13th Congress, Q 50, R 50, 1979.
40. Graham, W. J. Placing risks in perspective, International Water Power and Dam Construction, December, 2000.
41. Hawk, J. K. Evaluating Spillway Adequacy, Civil Engineering, May 1992, 74–76.
42. ICOLD Selection of design flood – Current Methods, Bulletin 82, 1992.
43. Kennard, M. F.; Bass, K. T. Determination of design flood and its application to existing dams, ICOLD, 16th Congress, Q 63, R 53; San Francisco, USA, 1988.
44. Lafitte, R. Dam safety in relation to floods – International Water Power & Dam Construction, April 1989.
45. NRCC Hydrology of floods in Canada – A guide to planning and design NR 16–15/ 1988 – National Research Council of Canada, 1990.
46. Pan, J.; Terg, W. Determination of design flood in China – 16th ICOLD, Q 63, R 88; San Francisco, USA, 1988.
47. Reither, P. H. Experience in design flood analysis of dams in Finland, Q63, R 57; San Francisco, USA, 1988.
48. Saelthun, N. R. Norwegian procedures for flood estimation, Q 63, R 28; San Francisco, USA, 1988.
49. SANCOLD South African National Committee on Large Dams, SANCOLD guidelines on safety in relation to floods, Report No.4, 1991.
50. Smith, C. D. Selection of design flood frequencies for hydraulic structures, Canadian Journal of Civil engineering, August 1993.
51. Takasu, S.; Yamaguchi, J. Principle for selecting type of spillway for flood control dams in Japan, 16th ICOLD, Q 63, R 19; San Francisco, USA, 1988.
52. Von Thun, J. L. Use of riskbased analysis in making decision on dam safety; NATO Advanced Study Institute on Engineering Reliability and Risk, Tuscon, USA, 1985.
53. Wang, B. H. Determination of design flood for spillways, ICOLD, 16th Congress, Q 63, R 39; San Francisco, USA, 1988.
54. Abecasis, F. M. Discussion on – Designing spillway crest for high-head operation. Jnl. ASCE, Hyd. Engg, 1970, 96(No.12).
55. Grzywienski, A. Anti-vacuum profiles for spillways of large dams; Trans. 4th ICOLD, New Delhi:India, 1951; Vol. 2.
56. Hager, W. H. Continuous crest profiles for standard spillway. Jnl. ASCE, Hyd. Engg, 1987, 113(No.11).
57. Hager, W. H. Experiments on standard spillway flow. Proc. Instn. Civil Engrs, Part 2, Sept. 1991.
58. Lemos, F. O. Criteria for the hydraulic design of overflow dams with 2:3 upstream face slope-13th ICOLD, Q 50, R 1 New Delhi, 1979.
59. Magalhaes, A. Comments on the paper- Criteria for the hydraulic design of overflow dams with 2:3 upstream face slope, by Lemos, Q 50, R1, in Vol 5, page 517, 13th ICOLD, New Delhi, 1979.
60. Murphy, T. E. Spillway crest design - Misc Paper No. H-73–5, U.S. Army Engineer Waterways Experiment Station, 1973.
61. Rouse, H.; Reid, L. Model research on spillway crests – Civil Engineering, January 1935.
62. Suryavanshi, R. D. The effect of silting on flow profile upstream of weirs- A case study- Irrigation and Power (CBIP), October, 1972.
63. US Army Engineer – Waterways Experiment Station – Hydraulic Design Criteria – 1952 and subsequent editions.
64. United States Bureau of Reclamation (USBR) – Design of small dams – 1960 and subsequent editions.
65. Anastasi, G.; Bisaz, E.; Gerodetti, M.; Schaad, F.; Soudrier, F. Essiis sur modele hydraulique et etudes d’evacuateurs par rapport aux conditions de restitution-13th ICOLD, Q 50, R 32, 1979.
66. Balbacher, K.; Lafitte, R. Evacuateur de crue du barrage al Ibtissam (Algerie)-13th ICOLD, Q 50, R 54, New Delhi, 1979.
67. Bremen, R.; Hager, W. H. Experiments in side channel spillways. ASCE of Jnl of Hyd Engg, May 1989; Vol. 115, No 5.
68. Farney, H. S.; Markus, A. Side channel spillway design. ASCE Jnl of Hyd Div, 1962; Vol. 88, 3.
69. Favere, H. Contribution a l’etude des courants liquides-; Rascher & Cie, Zurich: Switzerland, 1933.
70. Guercio, R.; Magini, R. Modelling Side Channel Spillways-Hydropower and Dams, 1998, Issue 4.
71. Hager, W. H; Bretz, N. V. Discussion to ‘Simplified design of contractions in supercritical flow’. ASCE Jnl of Hyd Engg, 1987; Vol. 113, 3.
72. Hajdin, G. Two contributions to spillway designing based on experimental studies- 13th ICOLD, Q50, R 45, 1979.
73. Hartung, F.; Knauss, J. Developments to improve economy, capacity and efficiency of structures controlling the passage of flood water through reservoirs-9th ICOLD, Istanbul, Q 33, R 14, 1967.
74. Hinds, J. Side Channel Spillways-Hydraulic theory, economic factors and experimental determination of losses. Trans ASCE, 1926; Vol. 89.
75. ICOLD (International Congress On Large Dams) Spillways, Shockwaves and Air entrainment, Bulletin No 81, 1992.
76. Ippen, A. T. Mechanics of supercritical flow, 1st paper of High velocity flow in open channels: A symposium. Trans, ASCE, 1951; Vol. 116.
77. Ippen, A. T.; Dawson, J. H. Design of channel contractions-High velocity flow in open channels, A symposium. Trans, ASCE, 1951; Vol. 116.
78. Khatsuria, R. M.; Deolalikar, P. B. Problems encountered in the hydraulic design of a side channel spillway-6th Congress, APD-IAHR, Kyoto, Japan, 1988.
79. Knight, A. C. E. Design of efficient side channel spillway. ASCE Jnl of Hyd. Div, Sept, 1989; Vol. 115, 9.
80. Mazumder, S. K.; Hager, W. H Supercritical Expansion flow in Rouse modified and reversed transitions. ASCE Jnl of Hyd. Eng., Feb. 1993; Vol. 119, 2.
81. Quintela, A. C.; Mohemed, J.; Magalhaes, A. P.; Almeida, A. B.; Costa, J. V. L’evacuateur de crue et les vidanges de fond du barrage de M’Jara-13th ICOLD, Q 50, R 40, 1979.
82. Rouse, H.; Bhoota, B. V.; Hsu, E. Y. Design of channel expansion. Trans ASCE, 1951; Vol. 116.
83. USBR Design of Small Dams, 1977.
84. WES Spillway for Genegantslet dam, . New York, Tech Memo 2–351, 1952.
85. WES Hydraulic Design Criteria, Chart 660–1, 1970a.
86. WES Hydraulic Design Criteria, Chart 660–2, 1970b.
87. USACE Engineering and Design; Hydraulic design of Spillway, Engineer Manual EM 1110–2–1603, January 1990.
88. Yen, B. C.; Wenzel, H. G. Dynamic equations for steady spatially varied flow. ASCE Jnl of Hyd Div, March, 1970; Vol. 96, 3.
89. Aigner, D. Hydraulic design of pooled step cascades-29th IAHR Congress, Beijing, China. 2001.
90. Boes, R. M. Scale effects in modelling two-phase stepped spillway flow – Hydraulics of stepped spillways; © Swets & Zeitlinger, Balkema. 2000, 53–60.
91. Boes, R. M.; Minor, H. E. Guidelines for the hydraulic design of stepped spillways – ibid –© Swets & Zeitlinger. 2000, 163–170.
92. Boes, R. M.; Minor, H. E. Hydraulic design of stepped spillways for RCC dams- Intnl.Jnl of Hydropower and Dams. 2002, Issue 3.
93. Bindo, M.; Gautier, J.; Lacroix, F. The stepped spillway of M’Bali dam, International Water power and dam construction. January, 1993.
94. Chamani, M. R. Air inception in skimming flow regime over stepped spillways, Proc.Intl. Workshop on Hydr of stepped Spillways, Balkema, Rotterdam;  Swets & Zeitlinger. 2000.
95. Chamani, M. R.; Rajaratnam, N. Jet flow on stepped spillways. J. Hydr. Engg. 1994, 120(2), 254–259.
96. Chamani, M. R.; Rajaratnam, N. Characteristics of skimming flow over stepped spillways. J. Hydrulic Engineering. 1999, 125(4), 361–368.
97. Chanson, H. State of the art of the hydraulic design of stepped chute spillways. Hydropower and Dams Journal. 1994a, 33–42.
98. Chanson, H. Comparison of energy dissipation between nappe and skimming flow regimes on chutes. IAHR Jnl. of Hydraulic Research. 1994b, 32(2), 213–218.
99. Chanson, H. A Transition flow regime on stepped spillways. The facts; 29th IAHR Congress, Beijing, China. 2001a.
100. Chanson, H. Experimental investigations of air entrainment in transition and skimming flows down a stepped chute, Research report no CE 158; The University of Queensland, Australia. July, 2001b.
101. Christodoulou, G. C. Energy dissipation on stepped spillways. Journal of Hyd. Engg. 1993, 119(No.3), 644–650.
102. Chinnarasri, C. Assessing the flow resistance of skimming flow on the step faces of stepped spillways - Dam Engineering, 2002.
103. Fratino, U.; Piccinni, A. F.; de Marinis, G. Dissipation efficiency of stepped spillways, Hydraulics of stepped spillways; © Swets & Zeitlinger, Netherlands. 2000.
104. Frizell, K. H.; Matos, J.; Pinheiro, A. N. Design of concrete stepped overlay protection for embankment dams – ibid.; © Swets & Zeitlinger. 2000.
105. Ghare, A. D.; Porey, P. D.; Ingle, R. N. Experimental studies on energy dissipation over stepped spillways, Proc Hydro 2002; Indian Society for Hydraulics, Mumbai. Dec 2002.
106. Hager, W. H. Uniform aerated chute flow. ASCE Jnl of Hyd Engg. April, 1991.
107. Hager, W. H.; Boes, R. M. Backwater and drawdown curves in stepped spillway flows, Proc.Intl. Workshop on Hydr of stepped Spillways;  Swets & Zeitlinger, Balkema, Rotterdam. 2000.
108. Iguacel, C. M.; Garcia, V. E. Stepped spillways – Design for the transition between the spillway crest and steps. HYDRA 2000. 1995, 1, 260–65, Thomas Telford, London.
109. Matos, J. Hydraulic design of stepped spillways over RCC dams, Hydraulics of stepped spillways; © Swets & Zeitlinger, Netherlands. 2000.
110. Matos, J.; Sanchez, M.; Quintela, A.; Dolz, J. Air entrainment and safety against cavitation damage in spillways over RCC dams – Hydraulics of stepped spillways – Balkema Publishers; © Swets & Zeitlinger, Netherlands. 2000.
111. Mondardo, J. M.; Fabiani, A. L. Comparison of energy dissipation between nappe and skimming flow regimes on stepped chutes. IAHR Journal of Hydraulic Research. 1995, 33(No.1), 119–122.
112. Nigus, L. A.; Steiger, K. M.; Marti, C. Ashton stepped spillway – Design and Construction, Hydraulics of Stepped Spillways, Balkema Publishers;  Swets & Zeitlinger, Netherlands. 2000.
113. Rajaratnam, N.; Katopodis, C. Hydraulics of Denil fishways. Proc ASCE J Hyd Engg. Sept 1984.
114. Rajaratnam, N. Skimming flow in stepped spillways. Journal of Hyd. Engg. 1990, 116(4), 587–91.
115. Rand, W. Flow geometry at straight drop spillways. Pros. ASCE, Hyd. Dn. 1955, 81(No.791, Sept.), 1–13.
116. Rice, G. E.; Kadavy, K. C. Model study of a roller compacted concrete stepped spillway. Journal of Hyd. Engg. 1996, 122(12), 292–7.
117. Sanchez, M.; Pomares, J.; Dolz, J. Pressure field in skimming flow over a stepped spillway, Hydraulics of stepped spillways, Balkema Publishers;  Swets & Zeitlinger, Netherlands. 2000.
118. Shu-Xun, R.; Chao-Yang, T.; Rui-Wan, P.; Xue-Min, H. Stepped dissipator on spillway face, Proc. 9th APD-IAHR, Singapore; 1994.
119. Sikora, G. J. An experimental study of the flow regimes in pool and weir fishways; M.Sc Thesis, University of Alberta, Canada. 1997.
120. Soreson, R. M. Stepped spillway, Hydraulic Model Investigation, Discussion. Journal of Hyd. Engg. 1985, 3(No.12), 1095–97.
121. Stephenson, D. Energy dissipation down stepped spillways, Intnl Water Power and Dam Construction. Sept. 1991.
122. Tatewar, S. P.; Ingle, R. N. Nappe flow on inclined stepped spillways. Journal of Institution of Engineers (India), – CV. Feb. 1999, 79, 175–179.
123. Tatewar, S. P.; Ingle, R. N.; Porey, P. D. Discussion on paper Sr no 8 above. ASCE Jnl of Hyd Engg. 2000.
124. Tozzi, M. J. Residual energy in stepped spillways, Intl Water Power and Dam Construction, May 1994.
125. Yasuda, Y.; Otshu, I. Flow resistance in skimming flow in stepped channels, Proc. 28th IAHR Congress; Theme B, Austria. 1999.
126. Yasuda, Y.; Takahashi, M.; Ohtsu, I. Energy dissipation of skimming flows on stepped-channel chutes, 29th IAHR Congress, Beijing, China. 2001.
127. Yildiz, D.; Kas, I Hydraulic performance of stepped chute spillways. Intl Jnl of Hydropower and Dams. 1998(Issue 4).
128. Ackers, P.; Thomas, A. R. Design and operation of air-regulated siphons for reservoir and head-water control, Symp. on Design and operation of siphons & siphon spillways; BHRA, England, May 1975.
129. Benfratello, G. Experiments on transient of self-priming siphons; Proc. 6th IAHR Congress, C-20, Hague, 1955.
130. Bollrich, G. Hydraulic investigations of the high-head siphon spillway of Burgkhammer – 16th ICOLD paper Q 71-R2, Durban; 1994.
131. Boreli, M. Stability of aerated siphons – Proc. 6th IAHR Congress, C-12, Hague; 1955.
132. CBIP Water resources research in India, Publication No 78 (Revised), 1979.
133. Crump, E. S.; Ackers, P. An experimental investigation into the performance of spillway siphon – Report INT 22, HRS; Wallingford, England, 1961.
134. Ervine, D. A.; Elsawy, E. M. Some scale effects in modelling air-regulated siphon spillways, Symp. on Design and operation of siphons and siphon spillways; BHRA, England, May 1975.
135. Ganesh Iyer, V. Volute siphons, Jnl. of Irrigation and Power; CBIP, INDIA, 1950.
136. Govind Rao, N. S. Design of siphons; CBIP Publication No.59, 1956.
137. Perkins, J. A.; Charlton, F. G. The effect of waves on an air-regulated siphon, Symp. on Design and operation of siphons and siphon spillways; BHRA, England, May 1975.
138. Prettyjohns, R.C.; Markland, E. Air-regulated siphon with novel arrangement for air admission. Proc. Inst. of Civ. Engrs., Part 2, March 1989.
139. Ackers, P.; Crump, E. S. The Vortex drop, Paper No. 6430. Proc. Inst. of Civ. Engrs, Vol. 16 August 1960.
140. Agiralioglu, N.; Muftuoglu, R. F. Hood characteristics for siphon-shaft spillways. ASCE Jnl. of Hyd. Engg, May 1989; Vol. 115, No.5.
141. Akhmedov, T. Kh.; Dzhurumbayeva, T. Kh. Increase of capacity in a vortex shaft outlet, Proc. International conference on Modelling, Testing and Monitoring for hydropower plants. published by Intnl.Journal on Hydropower and Dams, France, October, 1998.
142. Anderson, A. G.; Dahlin, W. Q. Model studies-Lawrence Avenue Sewer System, City of Chicago, Project report No 100; University of Minnesota, USA, Oct, 1968.
143. Arya, R. S.; Verma, M. S.; Singh, K.; Singh, K. P. De-aeration of shaft spillways with swivel flow, Proc. Water and Energy (2001); Intnl. R&D Conference, CBIP, New Delhi, October 1995.
144. Bruschin, J. Air-water flow on spillways and in plugged bottom outlets; Intnl. Conf. Hydraulic modelling of civil engineering structures, BHRA, England, September 1982.
145. Chanson, H. Air-water flows in partially-filled conduits. IAHR Jnl of Hydraulic Research, 1997; Vol. 35, No 5.
146. Dahlin, W. Q.; Wetzel, J. M. Rochester Dropshafts model studies, Project report No 206; Saint Anthony Falls Hydraulic Laboratory, University of Minnesota, USA, March, 1982.
147. Damulevicius, V. D.; Ruplys, B. Drop inlet spillways in Lithuania, Proc. 28th I.A.H.R Congress, Graz, Austria, 1999.
148. Ervine, D. A.; Ahmed, A. A. A scaling relationship for a two-dimensional vertical dropshaft, ibid.
149. Ervine, D. A. Air entrainment in hydraulic structures: A review- Proc. Institution of Civil Engineers, Water, Maritime and Energy, September, 1998.
150. Falvey, H. T. Air water flow in hydraulic structures, USBR Engineering Monograph No.41, Dec. 1980.
151. Fattor, C. A.; Bacchiega, J. D. Analysis of instabilities in the change og regime in morning-glory spillways, 29th IAHR Congress, Beijing; 2001.
152. Filho, W. J.; Bandeira, M. S. Considerations on hydraulic design of free and pressure shaft spillways, C.3, 13th ICOLD, New Delhi, 1979.
153. Hack, H. P. Air entrainment in dropshafts with annular flow by turbulent diffusion, 17th IAHR Congress, Baden-Baden, Germany, August 1977; Vol. 1.
154. Haindl, K. Transfer of air by the ring jump of water, 14th IAHR Congress, France, 1971; Vol. 1.
155. Haindl, K.; Ramesova, L. Modelling of zones of natural disaeration, 17th IAHR Congress, Baden-Baden, Germany, August 1977; Vol. 1.
156. Hajdin, G. Two contributions to spillway designing based on experimental studies, Q 50, R 45, 13th ICOLD, New Delhi, 1979.
157. Jain, A. K.; Raju, K. G. R.; Garde, R. J. Air entrainment in radial flow towards intakes. Proc. ASCE Jnl. of Hyd. Dn, Sept. 1978; Vol. 104, No.9.
158. Jain, S. C Tangential Vortex-Inlet. ASCE, Jnl. of Hyd. Engg, December 1984; Vol. 110, No.12.
159. Jain, S. C. Air transport in vortex-flow drop shafts. ASCE Jnl. of Hyd. Engg, Dec. 1988; Vol. 114, No.12.
160. Jain, S. C.; Ettema, R. Vortex flow intakes, Chapter 7 – Swirling flow problems at intakes. Edt. by J. Knauss. IAHR Hydraulic Structures Design Manual.
161. Jain, S. C.; Kennedy, J. F. Vortex-Flow Drop Structures for the Milwaukee Metropolitan Sewerage District Inline Storage System, Report No 264; The University of Iowa, 1983.
162. Lencastre, A. Shaft spillways, Theoretic experimental design, Proc 6th IAHR Congress, C-9, Hague; 1955; Vol. 3.
163. Leskovec, L. Suitable inlet form of pressure conduits, Paper C-14, ibid.
164. Martin, C. S. Characteristics fo an air-water mixture in a vertical shaft, Proc. Hyd. Div. Specialty Conference; ASCE, Montana, USA, Aug 1973.
165. Sailer, R. E. Air entrainment in siphon barrels. Civil Engineering, 1955; Vol. 25, No.5.
166. Sene, K. J.; Hunt, J. C. R.; Thomas, N. H. The role of coherent structures in bubble transport by turbulent shear flows. Journal of Fluid Mechanics, 1994; Vol. 259, 219–240.
167. Slissky, S. M.; Kuznetsova, E. V.; Akhmedov, T. K. Multy Storeyed Vortex shaft Outlets, 13th ICOLD, New Delhi, 1979; Vol. V.
168. Stephenson, D.; Metcalf, J. R Model studies of air entrainment in the Muela drop shaft. Proc. Instn. Civ. Engrs, Part 2, Sept. 1991.
169. Thomas, N. H. Entrapment and transport of bubbles by transient large eddies in multi-phase turbulent shear flows, International Conference on Physical Modelling of Multi-phase Flow; BHR Fluids, Coventry, UK, 1983.
170. USBR Design of small dams, 1973.
171. Wagner, W. E Determination of pressure controlled profiles. ASCE Trans, 1956; Vol. 121.
172. WES Morning glory spillways, HDC Chart 140-1/7, 1961.
173. Zuikov, A. L.; Chepaikin, G. A. Hydraulic calculation of free-flow eddy spillways, Hydro technical Construction. Original Russian Article, November 1988, 648–652.
174. Darvas, L. A. Discussion on – Performance and Design of Labyrinth weirs, ASCE Jnl. Of Hyd. Dn. HY 8, Aug. 1971.
175. Hay, N.; Taylor, G. Performance and Design of Labyrinth weirs. ASCE, Jnl. of Hyd. Dn. HY 11, November 1970.
176. Karya, G.; Hutama, P. T. Laporan Akhir Rakyat (TIR); Ciwadas, Jakarta, Indonesia.
177. Khanolkar, B. V.; Dharwad, R. C.; Sayanak, S. D. An unconventional duckbill spillway which can be constructed on a limited width of foundation rock, Salauli Project, Goa – 53rd ARS; CBI&P (India), Bhubaneswar, 1986.
178. Khatsuria, R. M.; Deolalikar, P. B.; Bhosekar, V. V. Design of duckbill spillway and reversed sloping curved stilling basin – Salauli Project – 54th R&D Session; CBI&P (India), Ranchi, 1988.
179. Knight, A. C. E. Design of efficient side channel spillway. ASCE Jnl of Hyd Engg, Sept 1989; Vol. 115, No 9.
180. Lux, F.; Hinchliff, D. L. Design and construction of labyrinth spillway; 15th ICOLD, Lausanne, Switzerland, 1985.
181. Magalhaes, Pinto, A. Labyrinth weir spillways, ibid, 1985.
182. Tacail, F. G.; Evans, B.; Babb, A. Case study of a labyrinth weir spillway, 1990; Vol. 17.
183. Zerrouk, N. E.; Marche, C. Les evacuateurs de erues en labyrinthe – ibid, 1995; Vol. 22.
184. Blaisdell, F. W. Hood Inlet for Closed Conduit Spillways. ASCE Jnl of Hyd Div, May 1960; Vol. 82, HY 5.
185. Boesch, A.; Aemmer, F. Spillways and outlet works for the El Cajon project, 13th ICOLD, Q50, R 30. New Delhi, 1979.
186. Bribiesca, J. L. Transactions, Technical Sessions, Q 50, New Delhi, 1979; Vol. V, 528–532.
187. Carter, R. W. Computation of peak discharge at culverts, US Geological Survey Circular No. 376, 1957.
188. Chanson, H The Hydraulics of Open Channel Flow-An Introduction: Chapt 19 Arnold Publications. London, 1999.
189. Falvey, H. T. Cavitation in Chutes and Spillways, USBR Engineering Monograph No 42, April 1990.
190. French, J. L Tapered Inlets for Pipe culverts. ASCE Jnl of Hyd Div, March 1964.
191. Herbrand, K; Scheuerlien, H. C. Examples of model tests dealing with special problems and design criteria at large capacity spillways, 13th ICOLD, Q 50, R 10, 1979.
192. USBR Design of Small dams, 1977.
193. U.S. Bureau of Public Roads Capacity charts for the hydraulic design of highway culverts, Hydraulic engineering Circular No 10, March 1965.
194. Anastasi, G.; Bisaz, E.; Gerodetti, M.; Schaad, F.; Soubrier, G. Hydraulic and static dimensions of a stilling basin in respect to design and security of the floor slab for a high capacity spillway, 13 th ICOLD, Q 50, R 32. New Delhi, 1979.
195. Armengou, J. Disipacion de energia hidraulica a pie de presa en presas boveda, PhD thesis; Universitat Politechnica de Catalunya, Barcelona, Spain, 1991.
196. Back, P. A. A.; Mee, W. T. The Victoria Project, Sri Lanka: Project planning and design of Victoria dam, Proc. Instn Civ Engrs, Part I, 1991, 281–311.
197. Bakhmeteff, B. A.; Feodoroff, N. V. Discussion on the paper Energy loss at the base of free overfall by Moore. Trans ASCE, 1943; Vol. 108.
198. Chamani, M. R.; Beirami, M. K. Flow characteristics at drops. ASCE Jnl of Hyd Engg, Aug 2002; Vol. 128, No 8.
199. Donnely, C. A.; Blaisdell, F. W. Straight Drop Spillway Stilling Basin, SAF laboratory Technical Paper no. 15, Series B, Nov 1954.
200. Ervine, D. A.; Falvey, H. T.; Wither, W. Pressure fluctuations on plunge pool floors. IAHR Jnl of Hydraulic Research, 1997; Vol. 35, No 2.
201. French Committee on Large Dams Degradations observees dans la zone D’impact de la lame deversante, 13 th ICOLD, Q 50, R 38. New Delhi, 1979.
202. French Committee on Large Dams Ouvrages D’evacuation de Grande Capacite, 13 th ICOLD, Q 50, R 61. New Delhi, 1979.
203. Gao, J. High efficiency of energy dissipation by double layers of jets and supershort plunge pool, Proc. 28th IAHR Congress, Graz: Austria, 1999.
204. Hartung, F.; Hausler, E. Scours, Stilling Basins and Downstream Protection Under Free Overfall Jets at Dams, 11 th ICOLD, Madrid, 1973.
205. Haung, Guobing; Wang, Caihuan Analysis of energy dissipation effect of cushion pool and stress characteristics & stability of base slab, Proc 29th IAHR Congress, 2001.
206. Jeanpierre, D. Precesions sur le fonctionnement de l’evacuateur de crue du barrage de Sainte – Croix (Verdon), 13 th ICOLD, Technical Sessions, Q 50. New Delhi, 1979, 563–66.
207. Luthra, S. D. L Dissipation of energy below overfall dams, Irrigation and Power, CBIP, Nov 1950.
208. Martins, R.; Viseu, T. Plunge pool slab design taking into account turbulent pressures, 9 th APD-IAHR Congress, August, 1994.
209. Mason, P. J. Energy dissipating crest splitters for concrete dams, Water Power and Dam Construction, November, 1983.
210. Moore, W. L. Energy loss at the base of a free overfall. Trans ASCE, 1943; Vol. 108.
211. Quintela, A. C.; Fernandes, J. S.; Cruz, A. A. Barrage de Cahora-Bassa Problemes poses par le passage des crues pendant et apres la construction, 13 th ICOLD, Q 50, R 41. New Delhi, 1979.
212. Quintela, A. C.; Cruz, A. A. Cahora-Bassa Dam Spillway Conception, Hydraulic model studies and Prototype Behaviour, Trans Intnl Symp on the Layout of Dams in Narrow Gorges, ICOLD. Brazil, 1982.
213. Rajaratnam, N.; Chamani, M. R. IAHR Energy loss at drpos. Jnl of Hyd Research, 1995; Vol. 33, No 3.
214. Rajaratnam, N.; Kwan, A. Y. P. Air entrainment at drops. Jnl of Hyd Research, IAHR, 1996; Vol. 34, No 5.
215. Rand, W. Flow geometry at straight drop soillways. Trans ASCE, Sept 1955; Vol. 81.
216. Schleiss, W., Bollaert, W., (Eds).; Rock Scour due to High-velocity Jets, Swets & Zeitlinger, Lisse, ISBN 90 5809 518 5, 2002.
217. Singhal, M. K.; Mohan, M. K.; Jagdish, M. K.; Tiagi, S. S. Elevated trajectory bucket for Lakhwar spillway, 47th Annual Research Session; CBIP, Hubli-Dharwad: India, Nov 1978; Vol. II.
218. Taraimovich, I. I. Deformation of channels below high head spillways on rock foundation, Hydrotechnical construction, Sept. 1978.
219. USBR Design of Small Dams, 1977.
220. USBR Hydraulic design of Stilling Basins and Energy Dissipators, Engineering Monograph, 1978.
221. Veronese, A. Erosion of a bed dowsntream from an outlet: ColoradoA&MCollege. Colorado, 1978.
222. WES Hydraulic Design Criteria, Sheets 623 to 624-1, Drop Structures, 1973.
223. Ait Alla, A. The role of fuse gates in dam safety – Hydropower and Dams, Issue six, 1996.
224. Chevalier, S.; Sud, A. K. Hydroplus fuse gate system: An ideal solution for increasing water storage and dam safety – 4th International R&D Conference on Water and Energy for 21st Century, Central Board of Irrigation and Power, Aurangabad: India, January, 2003.
225. Falvey, H. T; Treille, Philippe; Hydraulics and Design of Fuse gates – ASCE. Jnl. of Hyd. Engg, July 1995; Vol. 121, No.7.
226. Garrec, P. Fuse gates increase storage capacity at four dams in Gujarat, Hydropower and dams, Issue Five, 1998.
227. Gulati, O. T. Augmenting canal capacity through application of Hydroplus fuse gates at Mahi project of Gujarat, Water and Energy 2001, International R&D Conference, New Delhi, Oct 1995.
228. Hsu, H. Y. Design of fuse plug spillway – Indian Journal of Power and River Valley Development, Hydraulic Structures Special Number, 1963.
229. Muthy, Y. K.; Thatte, C. D.; Divatia, E Fuseplug for Auxiliary Spillway. Jnl. of Irrigation & Power, CBIP, July 1990.
230. Pugh, C. A. Hydraulic model studies of Fuse plug embankments, REC-ERC-85-7, USBR, USA, 1985.
231. Rayssiguier, J.; Lantheaume, P. How to optimise dam storage capacity without compromising safety: The Fuse gate Concept, CBIP Workshop on Role of Gates and their control in Water Resources Projects, Belgaum: India, 28–30 June 2000.
232. Tinney, E. R.; Hsu, H. Y Mechanics of washout of an erodible fuse plug – ASCE. Jnl. of Hyd. Div, 1961; Vol. 87, No. HY 3.
233. Huan-Wen, H.; Fu-Yi, C.; Sheng, C. Studies on the configuration of short intakes for free-flow spillway tunnels, 13th ICOLD, Q 50, R 57, New Delhi, 1979.
234. Wu-Sung, Ke; Sue-Jen, Wu; Che-Yoan, Huang An improved design of excluding sediment into river intake structures; 9th APD-IAHR Congress, Singapore, August 1994; Vol. 2, 208–214.
235. Paul, T. C.; Dhillon, G. S. Sluice dimensioning for desilting reservoirs; Water Power & Dam Construction, May 1988, 41–44.
236. Rao, G. N. Performance overview of the completed projects – Chukha Hydel Project, Bhutan, Proc. Fifth National Water Convention, Faridabad, India, Feb. 1994.
237. Rao, G. N. Method of protection of dam spillways of the projects in Himalayan region – Water & Energy International, 1995.
238. White, Rodney; Evacuation of sediments from Reservoirs; Thomas Telford Publishers, England, 2001, 280.
239. Annandale, G. W. Erodibility – Jnl. of Hydraulic Research, IAHR, 1995.
240. Hartung, F.; Scheuerlein, H. Design of overflow rockfill dams, 10th ICOLD, Q 36, R 35. Montreal, 1970.
241. Kirsten, H. A. D. A classification system for excavation in natural materials, The Civil Engr. In South Africa, July 1982, 293–308.
242. Knauss, J. Computation of maximum discharge at overflow rockfill dams (A comparison of different model test results), 13th ICOLD, Q 50, R 9, 1979.
243. Rathgeb, A. Design criteria for rock fill spillways, Proc. 28th IAHR Congress, TUGRAZ, Austria, 1999.
244. Van Schalkwyk, A.; Jordaan, J. M.; Dooge, N. Erosion of rock in unlined spillways, Q 71, R-37, 18th ICOLD. Durban, 1994.
245. Chanson, H. Hydraulics of rubber dam overflow: A simple design approach, 13th Australian Fluid Mechanics Conference; Monash University, Melbourne, Australia, 1998.
246. Hakin, W. D.; Siers, P.; Solomon, P. Defusing the situation, International Water power and Dam Construction, October, 2002.
247. Ishimura, Y. Design and installation of inflatable rubber weir, Water and Energy 2001; International R & D conference, CBIP, New Delhi: India, 1995.
248. Jongeling, T. H. G.; Rovekamp, N. H. Wave-induced response of inflatable barrier, 27th IAHR Biennial Congress, Graz, Austria, August 1999.
249. Ogihara, K.; Maramatsu, T. Rubber dam : Causes of oscillations of rubber dams and countermeasures, Proc 21st IAHR Congress, Melbourne, Australia, 1985.
250. Tam, P. W. M.; Zhang, X. Management of rubber dams in Hong Kong: Canadian Journal of Civil Engineering, 1999.
251. Baker, R. Pre-cast concrete blocks for dam spillways, International Water Power and Dam Construction, July, 1989.
252. Frizzel, K. H.; Ruff, J. F. Large scale embankment overtopping protection tests; ASCE Conf on Hydraulic Engineering, USA, 1993; Vol. 2.
253. McGovern, R. K.; Frizzel, K. H. Design of a continuously reinforced concrete slab to protect A. R. Bowman Dam during overtopping, 12th Annual USCOLD Lecture series. Fort Worth, 1992.
254. McLean, F. G.; Hansen, K. D. Geotechnical protection in Dam Rehabilitation, Proc ASCE Specialty Conference, April, 1993.
255. Metcalf, M.; Dolen, T. P.; Hendricks, P. A. Innovative aspects of the Santa Cruz dam modification, 12th Annual USCOLD Lecture series. Fort Worth, April 1992.
256. Oswalt, N. R. Overtopping protection-Alternatives for dams, Proc ASCE Conf on Hydraulic Engineering, Aug, 1992.
257. Pravdivets, Y. P.; Bramely, M. E. Stepped protection blocks for dam spillways, International water Power and dam Construction, July, 1989.
258. Annigeri, G. S.; Naidu, N. K. Radial gates- Some aspects for anchorage systems, gate leaf and hoisting system, CBIP Workshop on Role of Gates and their Control in Water Resources Projects. Belgaum, June, 1995.
259. Back, P. A. A.; Mee, W. T. The Victoria Project, Srilanka: Project planning and Design of Victoria dam, The Institution of Civil Engineers, Part I, April, 1991.
260. Boro, J. R.; Chauhan, G. Optimization of design of spillway gates, CBIP Workshop on Role of Gates and their Control in Water Resources Projects, Belgaum, June, 2000.
261. Central Water Commission-India Manual on Design of radial gates, April, 1999.
262. Godbole, P. Achieving automation in hydraulic gates without electricity by moving fulcrum type automatic tilting gate, CBIP Workshop on Hydraulic gates and their control in water resources projects. Nangal Township, October, 1998.
263. Kelkar, Y. S.; Khatsuria, R. M. Hydraulic forces on a submersible divide wall in a roller bucket, 43rd Annual Research Session, CBIP. Dehradun, June, 1973.
264. Khatsuria, R. M.; Ganesh Rao, H. C.; Deolalikar, P. B. Design of energy dissipator and downstream protection works- Srisailam dam spillway - CBIP, 54th R&D Session, Srinagar, Communication paper No 4, 1989.
265. Kleivan, E.; Torblaa, I. Opinions on ungated Vs gated spillway for embankment dams - 16th ICOLD, Q 63, R. 9. San Francisco, 1988.
266. Lewin, J. Hydraulic gates and valves in free surface flow and submerged outlets; 2nd edition. Thomas Telford, London, 2001.
267. Leyland, B. W.; Jessup, G. R.; Berry, S. R. Automatic controls for spillway gates and outlets, International Water Power and Dam construction, January, 1986.
268. Murti, N. G. K. Spillway and radial gates, CBIP Journal –Irrigation and Power, October, 1989.
269. Oswalt, N. R.; Pickering, G. A.; Hart, E. D. Problems and solutions associated with spillways and outlet works, 13th ICOLD, Q 50, R 15, 1979.
270. Schnitter, N. J. Discussion 52, Q 49, 13th ICOLD, Vol. 5, 1979, 488-93.
271. Sehgal, C. K. Design guidelines for spillway gates, ASCE Jnl.of Hyd Div. March, 1996, 122(No 3).
272. Simmler, H. Spillway design principles in Austria - 13th ICOLD, Q 50, R 52, 1979.
273. Sinnarkar, R. M.; Diwanji, V. N.; Khatsuria, R. M. Hydraulic aspects concerning location of stop log groove for spillways and sluice outlets-Some case studies, CBIP Workshop on Hydraulic gates and hoists in water resources projects. Banglore, June, 1995.
274. Sinnarkar, R. M.; Diwanji, V. N.; Khatsuria, R. M. Operational problems in hydraulic gates and solutions-CWPRS experiences, Second Round Table Meet on Design Practices and Issues, Water Resources Development Sector, organized by the Central Water Commission, March, 2000.
275. Townshend, P. The use of fully automatic spillway gates to increase storage in existing dams, CBIP Workshop on Role of Gates and their Control in Water Resources Projects, Belgaum, June, 2000.
276. USACE Engineering and Design; Hydraulic Design of spillways, Engineer Manual EM 1110-2-1603, January, 1990.
277. WES Hydraulic Design Criteria, Chart 311- Tainter gates on spillway crests- Discharge coefficients, 1977.
278. WES Hydraulic Design Criteria, Chart 312- Vertical lift gates on spillways- Discharge coefficients, 1977.
279. Carrera, E.; Roddy, R.; Hasen, H. Raising Guri dam. Safe construction to meet load growth in Venezuela, 13th ICOLD, Q 48, R 14, 1979.
280. Chavari, G.; Louie, D.; Castillejo, N.; Coleman, H.W. Spillway and tailrace design for revising of Guri dam using large scale hydraulic model, idbi, Q 50, R 12.
281. De Avila, L.; De Barros, P.; Tavares, G.; Ferreira, W. Itumbiara Project River Diversion. Interface problems during spillway construction, ibid, Q 48, R 44, 1979.
282. Khatsuria, R. M.; Deolalikar, P. B.; Bhosekar, V. V. Recent studies concerning design of divide walls in spillways and energy dissipators, Supplement to the Proceedings of the International Symposium on Design of Hydraulic Structures; Colorado State University, USA, August 1987.
283. Khatsuria, R. M. Staying high and dry-flood prediction and control, International Water Power and Dam Construction, April 1997.
284. WES Hydraulic Design Criteria-Low monolith diversion, Discharge Coefficients, Chart 711, 1977.
285. Mason, P. J. The choice of hydraulic energy dissipator for dam outlet works based on a survey of prototype usage. Proc. Instn. Civ Engrs, Part I. May 1982, 72.
286. Rudavsky, A. B. Selection of spillways and energy dissipators in preliminary planning of dam developments, 12th ICOLD, Q 46, R 9 Mexico, 1976.
287. Abdul Khader, M. H.; Elango, K. Turbulent pressure field beneath a hydraulic jump. IAHR Jnl. of Hyd. Res, 1974, 12(4).
288. Akbari, M. E.; Mittal, M. K.; Pande, P. K. Pressure fluctuations on the floor of free and forced hydraulic jumps, Proc. Int. Conf. on Hydraulic Modelling of Civil Engg. Structures, 1982.
289. Armenio, V.; Toscano, P.; Fiorotto, V. On the effect of a negative step in pressure fluctuations at the bottom of a hydraulic jump. IAHR Jnl of Hydraulic Research. 2000, 38(No 5).
290. Bacchiega, J. D.; Fattor, C. A.; Barrionuevo, H. D. Environmental considerations in the design of spillways: Analysis of hydrodynamic behavior, 28th IHHR Congress. TUGRAZ, 1999.
291. Bakhmeteff, B. A.; Matzke, A. E. The hydraulic jump in terms of dynamic similarity, Trans. ASCE, 1936.
292. Basco, D. R. Trends in baffled hydraulic jump stilling basin designs of the Corps of Engineers since 1947, Misc. Paper H-69-1, USWES, 1969.
293. Basco, D. R. An experimental study of drag forces and other performance criteria of baffle blocks in hydraulic jumps, Paper H-70-4, USWES, 1970.
294. Basco, D. R. Optimized geometry for baffle blocks in hydraulic jump, IAHR, 1971.
295. Basco, D. R.; Adams, J. R. Drag forces on baffle blocks in hydraulic jump. ASCE, Jnl. of Hyd. Div, Dec. 1971, 97.
296. Bellin, A.; Fiorotto, V. Direct dynamic force measurement on slabs in spillway stilling basins. ASCE, Jnl. of Hyd. Div, Oct. 1995, 121(No.10).
297. Bhowmik, N. G. Stilling basin design for low Froude number. ASCE, Jnl. of Hyd. Div, July 1975, 101(HY 7).
298. Blaisdell, F. W. Development and hydraulic design, Saint Anthony Falls stilling basin, Trans. ASCE, 1948; Vol. 113, 483–520.
299. Bowers, C. E.; Tsai, F. Y. Fluctuating pressures in spillway stilling basins. ASCE, Jnl. of Hyd. Dn, 1969, 95(6).
300. Bowers, E. C.; Toso, J. Karnafuli project, Model studies of spillway damage. ASCE, Jnl. of Hyd. Dn, May 1988, 114(No.5).
301. Bradely, J. N.; Peterka, A. J. The hydraulic design of stilling basins. ASCE, Jnl. of Hyd. Dn, Oct. 1957, 83(No.5).
302. Bribiesca, J. L. S.; Mariles, O. A. F. Experimental analysis of Macroturbulence effects on the lining of stilling basins, Q50, R613th ICOLD, 1979.
303. Cassidy, J. J.; Locher, F. A.; Lee, W.; Nakato, T. Hydraulic design for replacement of floor blocks of Pit 6stilling basin – 18th ICOLD. Durban, 1994.
304. Chanson, H.; Brattberg, T. Experimental study of the air-water shear flow in a hydraulic jump. Intl. Jnl. of Multiphase Flow, 2000, 26.
305. Chanson, H.; Toombes, L. Experimental investigations of air entrainment in transition and skimming flows down a stepped chute, Research Report No. CE 158, The University of Queensland, July 200l.
306. Ead, S. H.; Rajaratnam, N. Hydraulic Jump on Corrugated Beds. ASCE Jnl of Hyd Engg, 2002, 128(7).
307. Farhaudi, J.; Narayanan, R. Force on slab beneath hydraulic jump. ASCE, Jnl. of Hyd. Engg, 1991, 117(1).
308. Fiorotto, V.; Rinaldo, A. Fluctuating uplift and lining design in spillway stilling basins. ASCE, Jnl. of Hyd. Engg, 1992-a, 118(4).
309. Fiorotto, V.; Rinaldo, A. Turbulent pressure fluctuations under hydraulic jumps. IAHR, Jnl. of Hyd. Rs, 1992-b, 30(4).
310. Fiorotto, V.; Salandin, P. Design of anchored slabs in spillway stilling basins. ASCE, Jnl. of Hyd. Engg, July 2000, 126(7).
311. Fletcher, B. P.; Saunders, P. E. Dynamic loading on sidewall monoliths of spillway stilling basins, Tech. Report HL-88-10, USWES, 1988.
312. Gaikwad, S. R.; Kumthekar, M. J.; Khatsuria, R. M.; Khurjekar, M. J.; Deolalikar, P. B.; Bhosekar, V.V. Consideration of macro-turbulent pressure fluctuations in design of divide walls of stilling basins – Intnl. Symp. on New Techniques in model testing in hydraulic research, CBIP, held at CWPRS. Pune, 1987.
313. George, R. L. Low Froude number stilling basin design, Tech. Report No. RECERC- 78-8, USBR, August 1978.
314. Gomasta, S. K.; Mittal, M. K.; Pande, P. K. Hydrodynamic forces on baffle blocks in hydraulic jump, 17th Congress, IAHR. Baden-Baden, 1977.
315. Hager, W. H. B-jump in sloping channel. IAHR, Jnl. of Hyd. Res, 1988, 26(No.5).
316. Hager, W. H.; Bremen, R. Classical hydraulic jump: Sequent depths. IAHR, Jnl. of Hyd. Res, 1989, 21(No.4).
317. Hager, W. H.; Bremen, R.; Kawagoshi, N. Classical hydraulic jump: Length of roller. IAHR Jnl. of Hyd. Res, 1990, 28(No.5).
318. Hajdin, Georgije Contribution to the evaluation of fluctuation pressure on fluid currents limit areas- based on the pressures recorded at several points of the area, VIII Conference of Yugoslav Hydraulics Association. Portoroz, 1982.
319. Harkauli, A. N. General Comments on Q 50, 13th ICOLD, 1979, 513.
320. Husain, D.; Alhamid, A. A.; Negm, A. M. Length and depth of hydraulic jump on sloping floors. IAHR Jnl. of Hyd. Res, 1994, 32(No.6).
321. Kalinske, A. A.; Robertson, J. M. Closed conduit flow, Trans. ASCE, 1943.
322. Kawagashi, N.; Hager, W. H. B-jump in sloping channels-II. IAHR Jnl. of Hyd. Research, 1990, 28(No.4).
323. Khatsuria, R. M.; Balkrishnan, V. K. Two stage energy dissipator and appurtenant works – Ranjitsagar dam spillway, Punjab, 55th R&D Session, CBIP. Srinagar, 1989.
324. Khatsuria, R. M.; Deolalikar, P. B.; Bhosekar, V. V. Pull out forces on a concrete lined training wall in a stilling basin, 8th APD-IAHR Congress. Pune, 1992.
325. Khatsuria, R. M. State-of-art on role of turbulence in the design of spillway appurtenant structures, Technical Memorandum Published by Central Water & Power Research Station. Pune, 1994.
326. Khatsuria, R. M. Hydraulic and Structural Design Problems of High Head Stilling Basins, Intnl. R & D Conference—Water and Energy 2001, CBIP, New Delhi, Oct. 1995.
327. Khatsuria, R. M.; Deolalikar, P. B. Considerations on measurement of hydrodynamic bending moments on models of hydraulic structures, Proc. Ninth APD-IAHR Congress. Singapore, August 1994.
328. Khatsuria, R. M.; Deolalikar, P. B.; Bhosekar, V. V.; Sridevi, M. I. Energy dissipator for a low head high discharge intensity spillway, 3rd Intnl. R&D Conference, CBIP. Jabalpur, March 2000.
329. Kindsvater, C. E. The hydraulic jump in sloping channel, Trans. ASCE, 1943.
330. Locher, F. A. Some characteristics of pressure fluctuations on low-ogee crest spillways relevant to flow-induced structural vibrations, USWES, Report No. H-71-1, 1971.
331. Lopardo, R. A.; DeLio, J. C.; Vernet, G. F. Physical modelling of cavitation tendency for macroturbulence of hydraulic jump, Proc. Intnl. Conf. on Hyd. Modelling of Civil Engg. Structures, BHRA, 1982.
332. Lopardo, R. A.; Henning, R. E. Experimental advances on pressure fluctuation beneath hydraulic jump – Proc. 21st IAHR Congress. Melbourne, 1985.
333. Nakato, T. Model tests of hydraulic performance of Pit 6dam stilling basin. ASCE Jnl. of Hyd. Engg, Sept. 2000, 126(No.9).
334. Narasimhan, S.; Bhargava, V. P. Pressure fluctuations in submerged jump. ASCE Jnl. of Hyd. Dn, 1976, 102(HY 3).
335. Narayanan, R.; Schizas, L. S. Force fluctuations on sill of hydraulic jump. ASCE Jnl. of Hyd. Div, 1980-a, 196m(HY4).
336. Narayanan, R.; Schizas, L. S. Force on sill of forced jump, ASCE. Jnl. of Hyd. Div, 1980-b, 106(HY 7).
337. Negm, A. M. Hydraulic jumps at positive and negative steps on sloping floors. IAHR Jnl. of Hyd. Res, 1996, 34(No.3).
338. Ohtsu, I.; Yasuda, Y. Hydraulic jump in sloping channels. ASCE, Jnl. of Hyd. Engg, 1991, 117(No. HY. 7).
339. Pennino, B. J.; Larsen, J. Measurement of flow induced forces on floor blocks, Pit 6dam model studies, Alden Res. Lab Report No. 109-77/M 303 CF, July 1977.
340. Peterka, A. J. Hydraulic design of stilling basins and energy dissipators, Engineering Monograph No.25, USBR, 1978.
341. Peiqing, L.; Cheingui, L.; Dong, J. R. Using two dimensional instant fluctuation flow equation to analyse the transmision law of fluctuating pressure in the rock crack surface layers, Irrigation/Water Conservancy Journal, April 1996(in Chinese).
342. Pillai, N. N.; Goel, A.; Dubey, A. K. Hydraulic jump type stilling basin for low Froude numbers. ASCE, Jnl. of Hyd. Engg, July 1989, 115(No.7).
343. Pinto, N. General Report on Q-71, Deterioration of spillways and outlet works, 18th ICOLD. Durban, 1994.
344. Rajaratnam, N. An experimental study of the air entrainment characteristics of hydraulic jump, Publication No.14/1960, I.I.Sc, 1960.
345. Rajaratnam, N. An experimental study of air entrainment characteristics of the hydraulic jump, Jnl of the Institution of Engineers (India), March 1962.
346. Rajaratnam, N.; Murahari, V. Flow characteristics of sloping channel jumps. Proc. ASCE Jnl. of Hyd. Div, 1974, 100(No.HY6).
347. Ranga Raju, K. G.; Mitall, M. K.; Verma, M. S. Analysis of flow over baffle blocks and end sills. IAHR Jnl. of Hyd. Res, 1980, 18(No.3).
348. Resch, F. J.; Leutheusser, H. J. The hydraulic jump – turbulence measurements in the two phase flow region – La Houille Blanche (4) –, 1972.
349. Rice, C. E.; Kadavy, K. C. Protection against scour at SAF stilling basins. ASCE Jnl. of Hyd. Engg, Jan.1993, 119(No.1).
350. Rouse, H.; Siao, T. T.; Nagaratnam, S. Turbulence characteristics of the hydraulic jump, Trans, ASCE, 1959.
351. Sharma, H. D.; Varshney, D. V. Stilling basins for hydraulic structures with low Froude numbers, Proc. 42, ARS, CBIP. Dehradun, June 1973.
352. Spoljaric, A.; Maskimovic, C.; Hajdin, G. Unsteady dynamic force due to pressure fluctuations on the bottom of an energy dissipator – An example, Proc. Intnl. Conf. on Hyd. Modelling of Civ. Engg. Structures, BHRA, 1982.
353. Suzuki, Y.; Sakurai, A.; Kakumoto, N. A design of a chute spillway jointly serving as a roof slab of a hydropower station, 11th ICOLD, Q 41 – R 21. Madrid, 1973.
354. Thandaveswara, B. S. Self aerated flow characteristics in developing zones and in hydraulic jumps. I.I.Sc, Bangalore, 1974, PH.D Thesis.
355. Toso, J. W.; Bowers, C. E. Extreme pressures in hydraulic jump stilling basins. ASCE, Jnl. of Hyd. Engg, 1988, 114(8).
356. Tullis, J. P.; Rahmeyer, W. J. Spillway models, Proc. Intnl. Conf. on Hyd. Modelling of Civil. Engg. Structures, BHRA, 1982.
357. USACE Hydraulic design of spillways- Engineer Manual 1110-2-1603, January 1990.
358. USBR Design of Small Dams, US Government Printing Office, 1977.
359. USBR Hydraulic design of stilling basins and energy dissipators, Engg Monograph No 25, 1978.
360. Vasiliev, O. F.; Bukreyev, V. I. Statistical characteristics of pressure fluctuations in the region of hydraulic jump, Proc 12th IAHR Congress. Fort Collins, 1967.
361. Vittal, N.; Al-Gaini, A. M. Modified type III stilling basin new method of design. IAHR, Jnl. of Hyd. Res, 1992, 30(No.4).
362. Zirong, Liu; Yuchunan, Xin Turbulence characteristics downstream of hydraulic jump, 22nd IAHR Congress Lausanne, September 1987.
363. Balloffet, A. Pressures on spillway flip buckets -ASCE. Jnl. of Hyd. Dn. Sept. 1961.
364. Cabelka, J. The Losses of Mechanical Energy of the Overfall Jet on the Spillway Sections of Dams -IAHR 6th Congress, The Hague, 1955.
365. Chavarri, D.; Louie, S.; Castillejo, N.; Coleman, H. W. Spillway and tailrace design for raising of Guri dam using large scale hydraulic model, 13th ICOLD, Q 50, R 12. New Delhi, 1979.
366. Chen, T. C.; Yu, Y. S Pressure Distribution on Spillway Flip Buckets – ASCE, March 1965.
367. Ervine, D. A. The entrainment of air in Water -Water Power and Dam Construction, 1976, 28(12).
368. Hartung, F.; Hausler, E. Scour, stilling basins and downstream protection under overfall, 11th ICOLD. Madrid, 1973.
369. Juon, R.; Hager, W. H. Flip bucket without and with deflectors, Jnl. of Hyd. Engg ASCE, November 2000.
370. Kawakami, K. A study on the computation of horizontal distance of jet issued from a ski-jump spillway; Trans Japan Society of Civil Engineers. 1973; Vol. 5.
371. Kelker, Y. S.; Khatsuria, R. M. Hydraulic characteristics of ski-jump buckets subjected to submergence by tail water, CBIP 44th Annual Research Session. Chandigarh, 1975.
372. KNS, Rao ME, WRD Thesis: University of Roorkee, 1978.
373. Khatsuria, R. M.; Ganesh Rao, H. C.; Deolalikar, P. B. Design of a ski-jump spillway governed by downstream channel configuration -CBIP, 54th R&D Session, Srinagar, Tech. Session IV, Paper 3, 1989.
374. Khatsuria, R. M.; Deolalikar, P. B.; Pethe, P. C. Prediction of cavitation potential for alternative designs of spillway, Chamera H.E. Project -A case study, First International Conference on Research needs in Dam Safety, CBIP. New Delhi, 1991.
375. Laxmanswami, A. Performance of Trajectory Buckets at Low Froude Numbers, CBIP, Proc. 42 ARS, 1972.
376. Lenau, C. W.; Cassidy, J. J. Flow through spillway flip buckets. ASCE Jnl. of Hyd. Dn. May 1969.
377. Martins, R.; Viseu, T. Plunge pool slab design taking into account turbulent pressures, 9th APD -IAHR, Singapore 1994.
378. Mason, P. J. The choice of hydraulic energy dissipator for dam outlet works based on a survey of prototype usage. Proc. Instn. Civ Engrs, Part I. May 1982, 72.
379. Mason, P. J. Erosion of plunge pools downstream of dams due to the action of freetrajectory jets. Proc. Inst. Civ. Engrs. Part I. May 1984.
380. Mason, P. J.; Arumugam, K Free jet scour below dams and flip buckets. Proc. ASCE, Hyd. Dn. February 1985.
381. Mason, P. J.; Armugam, K. A review of 20 years of scour development at Kariba dam, 2nd Intl. Conf. on The Hydraulics of flood and flood control, BHRA, September 1985.
382. Mason, P. J. Effect of air entrainment on plunge pool scour. ASCE Jnl. of Hyd. Engg. March 1989.
383. Mason, P. J. Practical guide lines for the design of flip buckets and plunge pools, Water Power and Dam Construction, Sept./Oct. 1993.
384. Peterka, A. J. Hydraulic design of stilling basins and energy dissipators, USBR, Engg. Monograph, No.25, 1978.
385. Prasad, R. K. Pressure distribution on ski-jump buckets, Irrigation and Power, CBIP, 41(3), July 1984.
386. Quadri, S. A. W.; Jilani, A. K. M.; Fakhri, A. I. Some aspects on the design of trajectory buckets, Vol. II. Proc. 46th Research Session, CBIP. Trivandrum, Nov. 1977.
387. Rae, P. J.; Castro, D. H. Estimation of spillway free jet trajectory length, ASCE conference Hydraulic Engineering, 1994.
388. Roose, K.; Gilg, B. Comparison of the hydraulic model tests carried out for the skijump shaped spillways of the Smokovo and Paliodherli dams, 11th ICOLD. Madrid, 1973.
389. Rudavsky, A. B. Selection of spillways and energy dissipators in preliminary planning of dam developments, 12th Congress ICOLD, Q 46, R-9. Mexico, 1976.
390. Taraimovich, I. I. Deformation of channels below high head spillways on rock foundation, Hydrotechnical Construction, Sept. 1978.
391. USBR Hydraulic design of stilling bsins and energy dissipators, Engg Monograph No 25, 1978.
392. Varshney, R. S.; Bajaj, M. L. Ski-jump buckets on Indian dams, Irrigation & Power, CBIP, October 1970
393. Varshney, R. S. Pressure variation in mixed bucket type of energy dissipators, Irrigation and Power, CBIP, October 1975.
394. WES Hydraulic Design Criteria, Chart No 112-7 and 112-8, 1962.
395. Yildiz, D.; Uzucek, E. Prediction of scour depth from free falling flip bucket jets, Water Power and Dam Construction. Nov. 1994-a.
396. Yildiz, D.; Uzucek, E. Experience gained in Turkey on scours occurred downstream of the spillways of high dams and protective measures, 18th ICOLD, Q 71, R 9. Durban, 1994-b.
397. Dange, N. M.; Waghmare, D. S.; Ghodke, C. V.; Joshi, V. L. Prototype Behaviour of Slotted Roller Bucket - Proc. Intl. Workshop on Research Needs in Dam Safety; CBIP, New Delhi, 1989.
398. Doddiah, D. Study of bucket type energy dissipators with special reference to surge characteristics, Irrigation and Power; CBIP(India), July, 1960.
399. Govind Rao, N. S.; Rajaratnam, N. The submerged hydraulic jump. Jnl. of Hyd. Dn., ASCE, January 1963, 89(No.HY1).
400. Harkauli, A. N. General Comments on Q 50, 13th ICOLD, 1979, 513.
401. Hiranandani, M. G.; Wadekar, G. T. Spillways and Energy Dissipators - Hydraulic Model Investigations, CWPRS Tech. Memo. Hyd 1, April, 1962.
402. Johnson, R. L.; Perkins, L. Z. Spillway for Little Goose dam, Snake River, Washington, TR No 114-1, US WES, North Pacific Bonneville Lab, 1975.
403. Rao, K. N. S. Some studies on hydraulic energy dissipators, Thesis submitted to the University of Roorkee, April, 1978.
404. Kelkar, Y. S.; Khatsuria, R. M. Hydraulic forces on a submersible divide wall in a roller bucket, 43rd Annual Research Session; CBIP, Dehradun, June, 1973.
405. Khatsuria, R. M. Performance of solid roller buckets with special reference to submergence by tail water - Dissertation submitted to the University of Poona, for the degree of ME (Civil), March, 1975.
406. Khatsuria, R. M. Comparative performance of solid and slotted bucket energy dissipators for spillways - Indian Experience, National Conference HYDRO-99; Indian Society for Hydraulics, Nagpur, March, 1999.
407. McPherson, M. B.; Karr, M. H. A study of bucket type energy dissipator characteristics - ASCE Jnl. of Hyd. Dn, June 1957, Corrections, August, 1957.
408. Peterka, A. J. Hydraulic design of stilling basins and energy dissipators, USBR Eng. Monograph. 1978.
409. Thatte, C. D.; Patel, J. K.; Rana, J. C.- Repairs of energy dissipators of dams in Gujarat damaged due to spillway overflows - Proc. First Intnl. Conference in Research Needs in Dam Safety; CBIP, New Delhi, 1991.
410. USACE Hydraulic design of spillways- Engineer Manual 1110-2-1603, January, 1990.
411. USBR Design of Small Dams. (1977).
412. USBR Hydraulic design of stilling basins and energy dissipators, Engg Monograph No 25, 1978.
413. Vaeshney, R. S. Effect of bucket parameters on pressures and energy dissipation characteristics, Vishwakarma, April, 1968.
414. Varshney, R. S.; Dass, R. K. Roller action in bucket type energy dissipator - Irrigation and Power, CBIP, January, 1974.
415. WES Hydraulic Design Criteria, Chart 112-6, 1966.
416. French National Committee on Large Dams. Ouvrages D’evacuation de Grande Capacite, 13th ICOLD. Q50, R 61. New Delhi, 1979.
417. Herbrand, K.; Knauss, J. Computation and design of stilling basins with abruptly or gradually enlarged boundaries, 11th ICOLD, Q41, R 4. Madrid, 1973.
418. Herbrand, K.; Scheuerlien, H. C. Examples of model tests dealing with special problems and design criteria at large capacity spillways, 13 th ICOLD, Q 50, R 10. New Delhi, 1979.
419. USBR Hydraulic design of stilling Basins and Energy Dissipators, Engineering Monograph No25, 1978.
420. Gupta, B. N. Operational experience of the spillway and energy dissipation devices of Matatila dam located in south-west Uttarpradesh (India), Technical session, Q 50; 13th ICOLD, New Delhi, 1979; Vol. V, 533–536.
421. Kuttiammu, T. P.; Rao, J. V. Bhavani type stilling basin for spillways of large dams, Q 12, R 44; 4th ICOLD, New Delhi, 1951.
422. Morris, H. M. Hydraulics of energy dissipation in steep, rough channels, Bulletin 19, Research division; Virginia Polytechnic Institute, USA, Nov 1968.
423. USACE Hydraulic design of spillways- Engineer Manual 1110-2-1603, January 1990.
424. USBR Hydraulic design of stilling Basins and Energy Dissipators, Engineering Monograph No25, 1978.
425. Gandolfo, J. S.; Cotta, R. D. Dissipateur D’Energie, 6th Congress. IAHR, C-23. The Hague, 1955.
426. Gandolfo, J. S.; Cotta, R. D. Kinetic energy dissipation on apron for gate dams, 7th Congress. IAHR, D-22. Lisbon, 1957.
427. Kashiwai, J.; Yakushiji, K.; Miyawaki, C. Hydraulic characteristics and design of spillways and outlets for flood control of uncontrolled discharge dams, 19th ICOLD, Paper C. 8. Florence, 1997.
428. Khalifa, C.; Abdelkawi, C. Compacted spillways, ASCE Conf on Hydraulic Engineering, 1993.
429. Khatsuria, R. M. Discussion on the paper by Yang (1994)-Sr No 7 below. ASCE Jnl of Hyd Engg, June 1996, 122(No 6).
430. Rajaratnam, N.; Hurtig, K. I. Screen- type energy dissipator for hydraulic structures. ASCE Jnl of Hyd Engg, April 2000, 126(No 4).
431. Taylor, E. H. Asprokremmos dam spillway, 13th ICOLD, Q 50, R 18, 1979.
432. Yang, S. L. Dispersive–Flow energy dissipator. ASCE Jnl of Hyd Engg, Dec. 1994, 120(No 12).
433. Aksoy, S.; Ethembabaoglu, S. Cavitation damage at the discharge channels of Keban dam, 13th ICOLD, Q 50, R 21, 1979.
434. Arndt, R. E. A. Discussion on ‘Cavitation from surface irregularities in high velocity’. ASCE Jnl of Hyd Div. April 1977, 103(HY4).
435. Arndt, R. E. A. T. Cavitation in Fluid Machinery and Hydraulic Structures, Annual Review of Fluid Mechanics, 1981.
436. Ball, J. W. Hydraulic Characteristics of Gate Slots. ASCE Jnl of Hyd Div. October 1959, 85(HY 10).
437. Ball, J. W. Cavitation from surface irregularities in high velocity. ASCE Jnl of Hyd Div. September 1976, 102(HY 9).
438. Banks, P. A.; Cass, D. E.; Yung, K. Y. C. Effects of spillway operarion on cavitation damage to Hugh Keenleyside dam spillway. ASCE Hyd Engg. 1990, 2.
439. Beichley, G. L.; King, D. L. Cavitation Control by Aeartion of High-Velocity Jets. ASCE Jnl of Hyd Div. July 1975, 101(HY 7).
440. Berryhill, R. H. Stilling basin experiences of the Corps of Engineers. ASCE Jnl Hyd Div. June 1957, 83(HY3).
441. Burgess, J. S. Discussion on the paper –Cavitation damage and the Tarabela tunnel collapse of 1974, Proc Institution of Civil Engineers, Part I, Nov, 1981.
442. Corlin, B.; Larsen, P. Experience from some overflow and side spillway, 13th ICOLD, Q 50, R37, 1979.
443. Ethembabaoglu, S. Some characteristis of static prssures in the vicinity of slots, 13th ICOLD, Q 50, R 29, 1979.
444. Falvey, H. T. Predicting cavitation in tunnel spillways, Water Power and Dam Construction-, August 1982.
445. Falvey, H. T. Prevention of cavitation on chutes and spillways, Proc Conf on Frontiers in Hydraulic Engineering; ASCE, Cambridge, Mass: USA. 1983.
446. Falvey, H. T. Cavitation in Chutes and Spillways, USBR Engineering Monograph No 42, April 1990.
447. Fattor, C. A.; Lopardo, M. C.; Casado, J. M.; Lopardo, R. A. Cavitation by macroturbulent pressure fluctuations in hydraulic jump stilling basins, 29th IAHR Congress. Beijing, 2001.
448. Galperin, R. S. Cavitation in hydraulic structures. Moscow, 1979.
449. Kenn, M. J.; Garrod, A. D. Cavitation damage and the Tarbela tunnel collapse of 1974. Proc Instn of Civil Engrs, Part I. Feb 1981, 70.
450. Khatsuria, R. M.; Deolalikar, P. B.; Bhosekar, V. V.; Sridevi, M. I. Energy dissipator for a low head high discharge intensity spillway, 3rd Intnl R&D Conf; CBIP, Jabalpur, India. March 2000.
451. Khatsuria, R. M. Hydraulic jump stilling basins- Some unresolved issues, National Conf on Hydraulics and Water Resources Hydro 2001; Indian Society for Hydraulics, Pune. Dec 2001.
452. Kuttiammu, T. P.; Rao, J. V. Bhavani type stilling basin for large dams, 4th ICOLD, Q12, R 44, 1951.
453. Lopardo, R. A.; Henning, R. E. Experimental Advances on Pressure Fluctuations Beneath Hydraulic Jump, Proc 21st IAHR Congress. Melbourne, 1985.
454. Lowe, J.III; Bangash, H. D.; Chao, P. C. Some experiences with high velocity flow at Tarbela dam project, 13th ICOLD, Q 50, R 13, 1979.
455. Narayan, R.; Schizas, L. S. Force fluctuations on sill of hydraulic jump. ASCE Jnl Hyd Engg. April 1980, 106(No 4).
456. Pinto do Silva, D.; Lemos Olieira, F. Erosion in concrete and rock due to spillway discharges, Part III and IV, 9th ICOLD, Q 33, R 19. Istanbul, 1967.
457. Pillai, N. N.; Jayaraman, V. V. Cavitation on baffle piers in stilling basins, Symp on High Velocity Flows, Indian Institute of Science. Bangalore, 1967.
458. Pillai, N. N.; Goel, A.; Dubey, A. K. Hydraulic jump type stilling basin for low froude numbers. ASCE Jnl Hyd Engg. July 1989, 115(No 7).
459. Rajaratnam, N. An experimental study of the air entrainment characteristics of hydraulic jump, Publication No 14/1969, Indian Institution of Science. Bangalore, 1960.
460. Regan, R. P.; Munch, A. V.; Schrader, E. K. Cavitation and erosion damage to sluices and stilling basins at two high-head dams, 13th ICOLD, Q 50, R 11, 1979.
461. Rouse, H.; Jezdinsky, V. Fluctuations of pressures in conduit expansions. ASCE Jnl of Hyd Div. March 1966, 92(No HY 3).
462. Russel, S. O.; Ball, J. W. Sudden enlargement energy dissipator for Mica dam. ASCE Jnl of Hyd Div. July 1967, 93(HY 4).
463. Suryavanshi, B. D.; Vaidya, M. P.; Chowadhry, B. Use of chute blocks in stilling basins- An assessment, 11th ICOLD, Q 41, R 21. Madrid, 1973.
464. Toso, J. W.; Bowers, C. E. Exterme pressures in hydraulic jump stilling basins. ASCE Jnl Hyd Engg. Aug 1988, 114(No 8).
465. Tullis, J. P. Modelling cavitation for closed conduit flow. ASCE Jnl of Hyd Div. Nov 1981, 107(HY 11).
466. USBR Concrete Manual, 8th edition, US govt Printing Office. Washington, 1981.
467. Wang, Xi-Rui; Chou, Lin-Tai The method of calculation of controlling (or treatment) criteria for the spillway surface irregularities, 13th ICOLD, Q 50, R 56, New Delhi. 1979.
468. Wagner, W. E. Glen Canyon dam diversion tunnel outlets. ASCE Jnl of Hyd Div. Nov 1967, 93(No Hy 6).
469. Zhuravliova, A. G. Conditions of cavitation inception on smoothly-undulate surface of spillways, 20th IAHR Congress, Seminars. Moscow, Sept 1983.
470. Ackers, P.; Priestley, J. Self aerated flow down a chute spillway, 2nd Intnl Conf on The Hydraulics of Floods and Flood Control, BHRA, Sept 1985.
471. Afshar, N. R.; Asawa, G. L.; Ranga Raju, K. G. Air concentration distribution in self aerated flow. Jnl of Hyd Research, IAHR, 1994, 32(No 4).
472. Biechley, G. L.; King, D. L. Cavitation control by aeration of high- velocity jets, ASCE. Jnl of Hyd Div, July 1975, 101(HY7).
473. Bruschin, J. Forced aeration of high velocity flows. Jnl of Hyd Research, IAHR, 1987, 25(No 1).
474. CBIP (India) Procedure to work out bulkage in air-entrained flows in chute spillways, Technical Report No 8, Nov, 1970.
475. Chanson, H. Study of air entrainment and aeration devices. Jnl of Hyd Research, IAHR, 1989(a), Vol 27(No 3).
476. Chanson, H. Flow downstream of an aerator, Aerator spacing. Jnl of Hyd Research, IAHR, 1989(b), 27(No 4).
477. Chanson, H. Predicting the filling of ventilated cavities behind spillway aerators. Jnl of Hyd Research, IAHR, 1995, 33(No 3).
478. Chanson, H.; Toombes, L. Experimental investigations of air entrainment in transition and skimming flows down a stepped chute, Research report No CE 158; The University of Queensland, Australia, July, 2001.
479. Falvey, H. T. Air-water flow in hydraulic structures, USBR Engineering Monograph 41, 1980.
480. Falvey, H. T. Cavitation in chutes and spillways, USBR Engineering Monograph 42, 1990.
481. Falvey, H. T.; Ervine, D. A. Aeration in jets and high velocity flows, Proc Intnl Symp on Model- prototype correlation of hydraulic structures; ASCE/IAHR, USA, Aug 1988.
482. Fernando, A. M.; Rio, J. R. On the incipient aerated flow in chutes and spillways. Jnl of Hyd Research, IAHR, 2002, 40.
483. Hager, W. H. Uniform aerated flow, ASCE. Jnl of Hyd Engg, 1991, 117(No 4).
484. Hager, W. H.; Blaser, F. Drawdown curve and incipient aeration for chute floe, Canadian. Jnl of Civ Engg, June 1998, 25(No 3).
485. Hamilton, W. S. Preventing cavitation damage to hydraulic structures, Water Power and Dam Construction, Part One, Nov 1983; Part Two, Dec 1983.
486. Keller, R. J.; Rastogi, A. K. Design chart for predicting critical point on spillways, ASCE Jnl of Hyd Engg, HY 12, Dec 1977.
487. Killen, J.; Anderson, A. G. A study of the air-water interface in air entrained flow in open channels, 13th IAHR Congress, Japan 1969.
488. Oskolkov, A. G.; Semenkov, V. M. Experience in designing and maintenance of spillway structures on large rivers in the USSR, 13th ICOLD, Q 50, R 46, 1979.
489. Pinto, N. L. D. S.; Neidert, S. H. Model prototype conformity in aerated spillway flow, Intnl Conf on Hydraulic Modelling of Civil Engineering structures, BHRA, 1982.
490. Rutschmann, P.; Volkart, P. Spillway chute aeration. Intnl Waterpower and Dam Construction, 1988, 40(No 1).
491. Rutschmann, P.; Hager, W. H. Design and performance of spillway chute aerators. Intnl Waterpower and Dam Construction, 1990, 42(1), 36–42.
492. Straub, L. G.; Anderson, A. G. Experiments on self-aerated flows on a spillway, ASCE. Jnl of Hyd Div, December 1958.
493. WES Hydraulic Design Criteria Chart 111-18, Spillway Energy Loss.
494. Vischer, D.; Volkart, P.; Sigenthaler, G. Hydraulic modelling of air slots in open chute spillways, Intnl Conf on Hyd Modelling of Civ Engg Structures, BHRA, 1982.
495. Volkart, P.; Rutschmann, P. Aerators on spillway chute: Fundamentals and Applications, Proc Specialty conf on Advancements in Aerodynamics; Fluid Mechanics and Hydraulics, Minn, USA, 1986.
496. Wood, I. R. Air-water flows: Keynote address, 21st IAHR Congress. Melbourne, 1985.
497. Wood, I. R. Air entrainment in free surface flows, Chap 3, IAHR design Mannual No 4; Balkema Publications, The Netherlands, 1991, © Swets & Zeitlinger.
498. Zagustin, K.; Mantellini, T. Some experience on the relationship between a model and prototype for flow aeration in spillways, Intnl Conf on Hyd Modelling of Civ Engg Structures, BHRA, 1982.
499. Basco, D. R.; Adams, J. R. Drag forces on baffle blocks in hydraulic jump, ASCE. Jnl. of Hyd. Div., Dec. 1971, 97.
500. Bellin, A.; Fiorotto, V. Direct dynamic force measurement on slabs in spillway stilling basins, ASCE. Jnl. of Hyd. Div., Oct. 1995, 121(No.10).
501. Bruschin, J. Forced aeration of high velocity flows. Jnl of Hyd Research, IAHR, 1987, 25(No 1).
502. Casteleyn, J. A.; Kolkman, P. A. Air entrainment in siphons: Results of tests in two scale models and attempt at extrapolation – Proc. 17th Congress IAHR. Baden- Baden, 1977.
503. Damle, P. M. Role of hydraulic models in determining spillway profiles for low dams and anicuts, Symp on Role of models in the evolution of hydraulic structures and movement of sediment, CBIP. New Delhi, 1952.
504. Ervine, D. A.; Elsawy, E. M. Some scale effects in modelling air-regulated siphon spillways, Symp. on Design and operation of siphons and siphon spillways, BHRA, May 1975.
505. Farhaudi, J.; Narayanan, R. Force on slab beneath hydraulic jump, ASCE. Jnl. of Hyd. Engg., 117(1).
506. Fattor, C. A.; Lopardo, M. C.; Casado, J. M.; Lopardo, R. A. Cavitation by macroturbulent pressure fluctuations in hydraulic jump stilling basins, 29th IAHR Congress. Beijing, 2001.
507. Fletcher, B. P.; Saunders, P. E. Dynamic loading on sidewall monoliths of spillway stilling basins, Tech. Report HL-88-10, USWES.
508. Gaikwad, S. R.; Kumthekar, M. J.; Khatsuria, R. M.; Khurjekar, M. J.; Deolalikar, P. B.; Bhosekar, V. V. Consideration of macro-turbulent pressure fluctuations in design of divide walls of stilling basins – Intnl. Symp. on New Techniques in model testing in hydraulic research, CBIP, held at CWPRS. Pune.
509. Gomasta, S. K.; Mittal, M. K.; Pande, P. K. Hydrodynamic forces on baffle blocks in hydraulic jump, 17th Congress, IAHR, 1977, 4, C-56.
510. Jongeling, T. H. G.; Rovekamp, N. H. Wave induced response of inflatable barrier, 28th IHHR Congress, TUGRAZ, 1999.
511. Kells, J. A.; Smith, C. D. Reduction of cavitation on spillways by induced air entrainment, Canadian. Journal of Civ Engg, 1991, 18.
512. Khatsuria, R. M.; Deolalikar, P. B.; Bhosekar, V. V. Pull out forces on a concrete lined training wall in a stilling basin, 8th APD-IAHR Congress. Pune, 1992.
513. Khatsuria, R. M.; Deolalikar, P. B. Considerations on measurement of hydrodynamic bending moments on models of hydraulic structures, Proc. Ninth APD-IAHR Congress, August 1994.
514. Kobus, H. Local air entrainment and detrainment, Proc IAHR Symp on Scale effect in modeling hydraulic structures, Esslingen am Necker, 1984.
515. Lopardo, R. A.; De Lio, J. C.; Vernet, G. F. Model-prototype comparisons on pressure fluctuations in hydraulic jump energy dissipators, ibdi.
516. Nakato, T. Model tests of hydraulic performance of Pit 6 dam stilling basin, ASCE. Jnl. of Hyd. Engg, Sept. 2000, 126(No.9).
517. Pinto, N. L. D. S.; Neidert, S. H. Model prototype conformity in aerated spillway flow, Intnl Conf on Hydraulic Modelling of Civil Engineering Structures, BHRA, 1982.
518. Sakhuja, V. S.; Paul, T. C.; Singh, S. Air entrainment distortion in free surface flows, Proc IAHR Symp on Scale effect in modeling hydraulic structures, Esslingen am Necker, 1984.
519. Vischer, D.; Volkart, P.; Sigenthaler, G. Hydraulic modelling of air slots in open chute spillways, Intnl Conf on Hyd Modelling of Civ Engg Structures, BHRA, 1982.
520. Zagustin, K.; Mantellini, T. Some experience on the relationship between a model and prototype for flow aeration in spillways, Intnl Conf on Hyd Modelling of Civ Engg Structures, BHRA, 1982.