Continuum mechanics and plasticity

Continuum Mechanics and Plasticity

Volumn , Issue , 2004, Pages 1-685

  Wu, Han Chin ^a  

^a ASME   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85055829482     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (401)

1. Malvern, L.E., Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Englewood Cliffs, NJ, 1969.
2. Spencer, A.J.M., Continuum Mechanics, Longman, London and New York, 1980.
3. Lai, W.M., Rubin, D., and Krempl, E., Introduction to Continuum Mechanics, Pergamon Press, New York, 1974.
4. Fung, Y.C., First Course in Continuum Mechanics, Prentice-Hall, Englewood Cliffs, NJ, 1994.
5. Chadwick, P., Continuum Mechanics, George Allen & Unwin, London, 1976.
6. Malvern, L.E., Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Englewood Cliffs, NJ, 1969.
7. Prager, W., Introduction to Mechanics of Continua, Ginn, Boston, MA, 1961.
8. Eringen, A.C., Mechanics of Continua, Wiley, New York, 1967.
9. Fung, Y.C., Foundations of Solid Mechanics, Prentice-Hall, Englewood Cliffs, NJ, 1965.
10. Truesdell, C. and Toupin, R., The Classical Field Theories, in Handbuch der Physik, Vol. 3/1, S. Flugge, Ed., Springer-Verlag, Berlin, 1960.
11. Sokolnikoff, I.S., Mathematical Theory of Elasticity, McGraw-Hill, New York, 1956.
12. Truesdell, C. and Toupin, R. S. Flugge (ed.) The Classical Field Theories, in Handbuch der Physik, Vol. 3/1, Springer-Verlag, Berlin, 1960.
13. Spencer, A.J.M., Continuum Mechanics, Longman, London and New York, 1980.
14. Chadwick, P., Continuum Mechanics, George Allen & Unwin, London, 1976.
15. Eringen, A.C., Mechanics of Continua, Wiley, New York, 1967.
16. Rivlin, R.S. and Ericksen, J.L., Stress–deformation relations for isotropic materials, J. Ration. Mech. Anal., 4, 323, 1955.
17. Green, A.E. and Adkins, T.E., Large Elastic Deformations, Oxford University Press, Oxford, 1960, 7.
18. Rivlin, R.S., Some topics in finite elasticity, in Proc. 1st Symp. Naval Structural Mech., Goodier, J.N. and Hoff, N.J., Eds., 1958, 169.
19. Rivlin, R.S. and Saunders, D.W., Large elastic deformations of isotropic materials VII. Experiments on the deformation of rubber, Phil. Trans. R. Soc. Lond., A243, 251, 1951.
20. Poynting, J.H., On pressure perpendicular to the shear planes in finite pure shears, and on the lengthening of loaded wires when twisted, Proc. R. Soc., A82, 546, 1909.
21. Nagtegall, J.C. and de Jon, J.E., Some aspects of non-isotropic workhardening in finite strain plasticity, in Proc. Workshop on Plasticity of Metals at Finite Strain: Theory, Experiment and Computation, Lee, E.H. and Mallet, R.L., Eds., Stanford University, 1981, 65.
22. Wu, H.C. and Xu, Z., An axial–torsional extensometer for finite deformation, J. Eng. Mater. Technol., 112, 330, 1990.
23. Wu, H.C., Xu, Z., and Wang, P.T., Torsion test of aluminum in the large strain range, Int. J. Plasticity, 13, 873, 1998.
24. Bell, J.F., The experimental foundations of solid mechanics, in Handbuch der Physik, Via/1, Flügge, Ed., Springer, Berlin, 1973.
25. Penny, R.K. and Leckie, F.A., The mechanics of tensile testing, Int. J. Mech. Sci., 10, 262, 1968.
26. Wu, H.C. and Rummler, D.R., Analysis of misalignment in the tension test, J. Eng. Mater. Technol., 101, 68, 1979.
27. Nadai, A., Theory of Flow and Fracture of Solids, Vol. 1, McGraw-Hill, New York, 1950, 343.
28. Spitzig, W.A., Sober, R.J., and Richmond, O., Pressure dependence of yielding and associated volume expansion in tempered martensite, Acta Metall., 23, 885, 1975.
29. Taylor, G.I. and Quinney, H., The latent energy remaining in a metal after cold working, Proc. Roy. Soc. (London), Ser. A, 143, 307, 1934.
30. Bridgman, P.W., Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York, 1952, 118.
31. Armstrong, P.E., Hockett, J.E., and Sherby, O.D., Large strain multidirectional deformation of 1100 aluminum at 300 K, J. Mech. Phys. Solids, 30, 37, 1982.
32. Gunasekera, J.S., Havranek, J., and Littlejohn, M.H., The effect of specimen size on stress–strain behavior in compression, J. Eng. Mater. Technol., 104, 274, 1982.
33. Khan, A.S. and Liang, R., Behaviors of three BCC metals during non-proportional multi-axial loadings: experiments and modeling, Int. J. Plasticity, 16, 1443, 2000.
34. Kupher, H., Hilsdorf, H.K., and Rusch, H., Behavior of concrete under biaxial stresses, Am. Concrete Inst. J. Proc., 60, 209, 1963.
35. Wu, H.C., Dual failure criterion for plain concrete, J. Eng. Mech. Div., ASCE, 100, 1167, 1974.
36. Coker, E.G. and Filon, L.N.G., Photoelasticity, 2nd Edn., Cambridge Press, London, 1957, 587.
37. Wu, H.C., Chang, K.J., and Schwarz, J., Fracture in the compression of columnar grained ice, Eng. Fracture Mech., 8, 365, 1976.
38. Hecker, S.S., Stout, M.G., and Eash, D.T., Experiments on plastic deformation at finite strains, in Proc. Research Workshop: Plasticity of Metals at Finite Strain-Theory, Experiment and Computation, Lee, E.H. and Mallett, R.L., Eds., Stanford University and RPI, Palo Alto, CA, 1982, 162.
39. Batdorf, S.B. and Robert, W.C.K., Shear plastic stress–strain relation obtained from torque–twist data, J. Eng. Mater. Technol., 108, 354, 1986.
40. Brown, M.W., Torsional stresses in tubular specimens, J. Strain Anal., 13, 23, 1978.
41. Wu, H.C., Xu, Z.Y., and Wang, P.T., The shear stress–strain curve determination from torsion test in the large strain range, ASTM J. Testing Eval., 20, 396, 1992.
42. Wu, H.C., Aboutorabi, M.R., and Chen, P.C.T., Cyclic torsion of a circular cylinder and its residual stress distribution, J. Eng. Mater. Technol., 107, 48, 1985.
43. Wu, H.C., Xu, Z.Y., and Wang, P.T., Determination of shear stress–strain curve from torsion test for loading–unloading and cyclic loading, J. Eng. Mater. Technol., 119, 113, 1997.
44. Garofalo, F., Fundamentals of Creep and Creep-Rupture in Metals, Macmillan, New York, 1965, 6.
45. Corum, J.M., Greenstreet, W.L., Liu, K.C., Pugh, C.E., and Swindeman, R.W., Interim Guidelines for Detailed Inelastic Analysis of High-Temperature Reactor System Components, ORNL-5014, 1974.
46. Ikegami, K. and Niitsu, Y., Experimental evaluation of the interaction effect between plastic and creep deformation, Eng. Fract. Mech., 21, 897, 1985.
47. Wu, H.C. and Ho, C.C., Strain hardening of annealed 304 stainless steel by creep, J. Eng. Mater. Technol., 115, 345, 1993.
48. Kujawski, D., Kallianpur, V., and Krempl, E., An experimental study of uniaxial creep, cyclic creep and relaxation of AISI type 304 stainless steel at room temperature, J. Mech. Phys. Solids, 28, 129, 1980.
49. Wu, H.C. and Yao, J. C., Investigation of Creep by Using of Closed Loop Servo-Hydraulic Test System, Report G302-81-001, Division of Materials Engineering, The University of Iowa, Iowa City, IA, 1981.
50. Wu, H.C. and Ho, C.C., An investigation of transient creep by means of endochronic viscoplasticity and experiment, J. Eng. Mater. Technol., 117, 260, 1995.
51. Xia, Z. and Ellyin, F., An experimental study on the effect of prior plastic straining on creep behavior of 304 stainless steel, J. Eng. Mater. Technol., 115, 200, 1993.
52. Hayhurst, D.R., The effects of test variables on scatter in high-temperature tensile creep-rupture data, Int. J. Mech. Sci., 16, 829, 1974.
53. Wu, H.C. and Wang, T.P., Analysis of test system misalignment in the creep test, J. Eng. Mater. Technol., 104, 280, 1982.
54. Ludwik, P., Elemente derTechnologischen Mechanik, Springer-Verlag, Berlin, 1909.
55. Ramberg, W. and Osgood, W., Description of stress–strain curves by three parameters, NACA Tech. Note No. 902, 1943.
56. Crossland, B., The effect of fluid pressure on the shear properties of metals, Proc. Inst. Mech. Engrs., 168, 935, 1954.
57. Hu, L.W., Plastic stress–strain relations and hydrostatic stress, in Proc. 2nd Symposium on Naval Struc. Mech., Lee, E.H. and Symonds, P.S., Eds., Brown University, Pergamon Press, 1960, 194.
58. Poynting, J.H., On pressure perpendicular to the shear-planes in finite pure shears, and on lengthening of loaded wires when twisted, Proc. Roy. Soc. London A, 82, 546, 1909.
59. Swift, H.W., Length changes in metals under torsional overstrain, Engineering, 163, 253, 1947.
60. Hughes, D.E.R., The hot-torsion test for assessing hot-working properties of steels, J. Iron Steel Inst. 170, 214, 1952.
61. Hodierne, F.A., A torsion test for use in metal working studies. J. Inst. Metals 91, 267, 1962.
62. Ronay, M., On second-order strain accumulation in aluminum in reversed cyclic torsion at elevated temperatures, Int. J. Solids Struct., 3, 167, 1967.
63. Ronay, M., Second-order elongation of metal tubes in cyclic torsion, Int. J. Solids Struct. 4, 509, 1968.
64. Bailey, J.A., Naos, S.L., and Nawab, K.C., Anisotropy in plastic torsion, J. Basic Eng., 94, 231, 1972.
65. Billington, E.W., Non-linear mechanical response of various metals: 3, Swift effect considered in relations to the stress–strain behavior in simple compression, tension and torsion, J. Phys. D: Appl. Phys., 10, 553, 1977.
66. Lindholm, U.S., Nagy, A., Johnson, G.R., and Hoegfeldt, J.M., Large strain, high strain rate testing of copper, J. Eng. Mater. Technol., 102, 376, 1980.
67. Van Arsdale, W.E., Hart, E.W., and Jenkins, J.J., Elongation upon torsion in a theory for the inelastic behavior of metals, J. Appl. Phys., 51, 953, 1980.
68. Montheillet, F., Cohen, M., and Jonas, J.J., Axial stresses and texture development during the torsion testing on Al, Cu and a-Fe, Acta Metall. 32, 2077, 1984.
69. Wu, H.C. and Xu, Z., An experimental investigation of the axial effect during torsion, in Advances in Constitutive Laws for Engineering Materials, Fan, J. and Murakami, S., Eds., International Academic Publishers, 1989, 232.
70. Lipkin, J. and Lowe, T.C., Axial effects during reversed torsional deformation. Advances in Plasticity 1989, Kahn, A.S. and Tokuda, M., Eds., Pergamon Press, Oxford, 1989, 625.
71. White, C.S., Bronkhorst, C.A., and Anand, L., An improved isotropic-kinematics hardening model for moderate deformation metal plasticity, Mech. Mater., 10, 127, 1990.
72. Weerasooriya, T. and Swanson, R.A., Experimental evaluation of the Taylor-type polycrystal model for the finite deformation of an fcc metal (OFHC copper), U.S. Army Materials Technology Laboratory, Watertown, MA, 1991.
73. Toth, L.S., Jonas, J.J., Daniel, D., and Bailey, A., Texture development and length changes in copper bars subjected to free end torsion, Textures Microstruct., 19, 245, 1992.
74. Miller, M.P. and McDowell, D.L., The effect of stress-state on the large strain inelastic deformation behavior of 304L stainless steel, ASME J. Eng. Mat. Tech. 118, 28, 1996.
75. Taylor, G.I. and Quinney, H., The plastic distortion of metal, Phil. Trans. Roy. Soc. A, 230, 323, 1931.
76. Canova, G.R., Shrivastava, S., Jonas, J.J., and Sell, C.G., The use of torsion testing to assess material formability, ASTM STP 753, Newby, J.R. and Niemeier, B.A., Eds., 189, 1982.
77. Freudenthal, A. M. and Ronay, M., Second-order effects in dissipative media. Proc., Royal. Soc. London A, 292, 14, 1966.
78. Wang, P.T., Panchanandeeswaran, S., and Wu, H.C., Comparison of flow stress and texture for P0818 cast aluminum deformed in compression and in torsion. Alcoa Technical Center Research Report, 1995.
79. Canova, G.R., Kocks, U.F., and Jonas, J.J., Theory of torsion texture development, Acta Metall., 32, 211, 1984.
80. Taylor, G.I. and Quinney, H., The plastic distortion of metal, Phil. Trans. Roy. Soc. A. 230, 323, 1931.
81. Bertsch, P.K. and Findley, W.N., An experimental study of subsequent yield surfaces-corners, normality, Bauschinger effect and allied effects, Proc. 4th U.S. Natl. Cong. Appl. Mech., 893, 1962.
82. Mair, W.M. and Pugh, H.L.D., Effect of prestrain on yield surfaces in copper, J. Mech. Eng. Sci., 6, 150, 1964.
83. Phillips, A. and Tang, J.L., The effect of loading path on the yield surface at elevated temperatures, Int. J. Solids Struct., 8, 463, 1972.
84. Wu, H.C. and Yeh, W.C., On the experimental determination of yield surfaces and some results of annealed 304 stainless steel, Int. J. Plasticity, 7, 803, 1991.
85. Wu, H.C. and Ho, C.C., Strain-hardening of annealed 304 stainless steel by creep, J. Eng. Mat. Tech., 115, 345, 1993.
86. Ishikawa, H., Subsequent yield surface probed from its current center, Int. J. Plasticity, 13, 533, 1997.
87. Szczepinski, W., On the effect of plastic deformation on yield criterion, Arch. Mech., 15, 276, 1963.
88. Batdorf, S.B. and Budiansky, B.A., A mathematical theory of plasticity based on the concept of slip, NACA, TN 1871, 1949.
89. Lin, T.H., A proposed theory of plasticity based on slips, Proc. Second U.S. Natl. Congress Appl. Mech., 461, 1954.
90. Lin, T.H., On stress–strain relations based on slips, Proc. Third U.S. Natl. Congress Appl. Mech., 581, 1958.
91. Phillips, A., A review of quasistatic experimental plasticity and viscoplasticity, Int. J. Plasticity, 2, 315, 1986.
92. Mises, R. von, Mechanik der Fasten Korper im plastisch defomablen Zustand, Göttingen Nachrichten, Math. Phys. Kl., 581, 1913.
93. Tresca, H., On the flow of solid bodies subjected to high pressure, C.R. Acad. Sci. Paris, 59, 754, 1864.
94. Lode, W., Versuche über den Einfluss der mittleren Hauptspannung auf das Fliessen der Metalle, Eisen, Kupfer und Nickel, Z. Phys., 36, 913, 1926.
95. Hill, R., The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950, 38.
96. Hundy, B.B. and Green, A.P., A determination of plastic stress–strain relations, J. Mech. Phys. Solids, 3, 16, 1954.
97. Lianis, G. and Ford, H., An experimental investigation of the yield criterion and the stress–strain law, J. Mech. Phys. Solids, 5, 215, 1957.
98. Phillips, A. and Moon, H., An experimental investigation concerning yield surfaces and loading surfaces, Acta Mech., 27, 91, 1977.
99. Ohashi, Y., Kawashima, K., and Yokochi, T., Anisotropy due to plastic deformation of initially isotropic mild steel and its analytical formulation, J. Mech. Phys. Solids, 23, 277, 1975.
100. Drucker, D.C., A more fundamental approach to plastic stress–strain relations, in Proc. 1st U.S. Natl. Congress Appl. Mech., ASME 487, 1951.
101. Bell, J.F., The experimental foundations of solid mechanics, Handbuch der Physik, Via/1, Flügge, Ed., Springer, Berlin, 1973.
102. Prager, W., The theory of plasticity: a survey of recent achievements (James Clayton Lecture), Proc. Inst. Mech. Eng., 169, 41, 1955.
103. Hodge, Jr., P.G., Piecewise linear plasticity, Proc. 9th Int. Congress. Appl. Mech., 8, 65, 1957.
104. Ziegler, H., A modification of Prager’s hardening rule, Quart. Appl. Math., 17, 55, 1959.
105. Armstrong, P.J. and Frederick, C.O., Amathematical representation of the multiaxial Bauschinger effect, G.E.G.B. Report RD/B/N 731, Berceley Nuclear Laboratories, 1966.
106. Valanis, K.C., A theory of viscoplasticity without a yield surface, Arch. Mech. 23, 517, 1971.
107. Wu, H.C. and Yang, R.J., Application of the improved endochronic theory of plasticity to loading with multi-axial strain-path, Int. J. Non-Linear Mech., 18, 395, 1983.
108. Wu, H.C., Yang, C.C., and Chu, S.C., Further application of endochronic constitutive equation to loading with non-proportional axial–torsional strain-path, Int. J. Non-Linear Mech., 20, 41, 1985.
109. Prager, W., Recent developments in the mathematical theory of plasticity, J. Appl. Phys., 20, 235, 1949.
110. Drucker, D.C., A definition of stable inelastic material, J. Appl. Mech., 26, 101, 1959.
111. Simo, J.C. and Hughes, T.J.R., Computational Inelasticity, Springer-Verlag, New York, 1998.
112. Ilyushin, A.A., On the postulate of plasticity, PMM, 25, 503, 1961.
113. Ilyushin, A.A., Plasticity, Izdat. Akad. Nauk. SSSR, Moscow, 196, 1963.
114. Naghdi, P.M. and Trapp, J.A., The significance of formulating plasticity theory with reference to loading surfaces in strain space, Int. J. Eng. Sci., 13, 785, 1975.
115. Casey, J. and Naghdi, P.M., On the nonequivalence of the stress space and strain space formulations of plasticity theory, J. Appl. Mech., 50, 350, 1983.
116. Valanis, K.C., A theory ofviscoplasticity without a yield surface, Arch. Mech., 23, 517, 1971.
117. Valanis, K.C., Fundamental consequences ofa new intrinsic time measure-plasticity as a limit ofthe endochronic theory, Arch. Mech., 32, 171, 1980.
118. Ohashi, Y. and Tokuda, M., Precise measurement ofplastic behavior ofmild steel tubular specimens subjected to combined torsion and axial force, J. Mech. Phys. Solids, 21, 214, 1973.
119. Wu, H.C. and Yeh, W.C., On the experimental determination ofyield surfaces and some results ofannealed 304 stainless steel, Int. J. Plasticity, 7, 803, 1991.
120. Phillips, A. and Lu, W.Y., An experimental investigation ofyield surfaces and loading surfaces of pure aluminum with stress-controlled and strain-controlled paths ofloading, J. Eng. Mater. Technol., 106, 349, 1984.
121. Ivey, H.J., Plastic stress–strain relations and yield surfaces for aluminum alloys, J. Mech. Eng. Sci., 3, 15, 1961.
122. Wu, H.C. and Yang, C.C., Investigation ofthe one-dimensional endochronic constitutive equation for metals by the Rivlin test, J. Eng. Mater. Technol., 106, 264, 1984.
123. Ellis, J.R., Robinson, D.N., and Pugh, C.E., Time dependence in biaxial yield oftype 316 stainless steel at room temperature, J. Eng. Mater. Technol., 105, 250, 1983.
124. Taylor, G. I. and Quinney, H., The plastic distortion ofmetal, Phil. Trans. Roy. Soc. A, 230, 323, 1931.
125. Naghdi, P.M., Essenburg, F., and Koff, W., Experimental study of initial and subsequent yield surface in plasticity, J. Appl. Mech., 201, 1958.
126. McComb, H.G. Jr., Some experiments concerning subsequent yield surface in plasticity, NASA TN D-396, 1960.
127. Mair, W.M. and Pugh, H.L.D., Effect of prestrain on yield surfaces in copper, J. Mech. Eng. Sci., 6, 150, 1964.
128. Bertsch, P.K. and Findley, W.N., An experimental study ofsubsequent yield surfaces-corners, normality, Bauschinger effect and allied effects, Proc. 4th U.S. Nat. Cong. Appl. Mech., 893, 1962.
129. Phillips, A. and Moon, H., An experimental investigation concerning yield surfaces and loading surfaces, Acta Mech., 27, 91, 1977.
130. Shiratori, E., Ikegami, K., Yoshida, F., Kaneko, K., and Koike, S., The subsequent yield surface after preloading under combined axial load and torsion, Bull. JSME, 19, 877, 1976.
131. Ishikawa, H., Subsequent yield surface probed from its current center, Int. J. Plasticity, 13, 533, 1997.
132. Lode, W., Versuche über den Einfluss der mittleren Hauptspannung aufdas Fliessen der Metalle, Eisen, Kupfer und Nickel, Z. Phys., 36, 913, 1926.
133. Hu, L.W. and Bratt, J.F., Effect of tensile plastic deformation on yield criterion, J. Appl. Mech., 25, 411, 1958.
134. Szczepinski, W., On the effect of plastic deformation on yield criterion, Arch. Mech., 15, 276, 1963.
135. Szczepinski, W. and Miastkowski, J., An experimental study ofthe effect ofthe prestraining history on the yield surfaces of an aluminum alloy, J. Mech. Phys. Solids, 16, 153, 1968.
136. Shiratori, E. and Ikegami, K., Experimental study ofthe subsequent yield surface by using cross-shaped specimens, J. Mech. Phys. Solids, 16, 373, 1968.
137. Phillips, A. and Tang, J.L., The effect of loading path on the yield surface at elevated temperatures, Int. J. Solids Structures, 8, 463, 1972.
138. Helling, D.E., Miller, A.K., and Stout, M.G., An experimental investigation ofthe yield loci of1100-0 aluminum, 70: 30 brass, and an overaged 2024 aluminum alloy after various prestrains. J. Eng. Mater. Technol., 108, 313, 1986.
139. Wu, H.C., Lu, J.K., and Pan, W.F., Some observations on yield surfaces for 304 stainless steel at large strain, J. Appl. Mech., 62, 626, 1995.
140. Wu, H.C., Effect of loading-path on the evolution of yield surface for anisotropic metals subjected to large pre-strain, Int. J. Plasticity, 19, 1773, 2003.
141. Wu, H.C. and Xu, Z., An axial–torsional extensometer for finite deformation, J. Eng. Mater. Technol., 112, 330, 1990.
142. Phillips, A., A review ofquasistatic experimental plasticity and viscoplasticity, Int. J. Plasticity, 2, 315, 1986.
143. Wu, H.C., Viscoplasticity Under Complex States of Stress, Ph.D. thesis submitted to Yale University, New Haven, CT, 1970.
144. Phillips, A. and Wu, H.C., A theory ofviscoplasticity, Int. J. Solids Struct.,9,15, 1973.
145. Phillips, A., Experimental plasticity. Some thoughts on its present status and possible future trends, in Problems of Plasticity, Sawczuk, A. Ed., Nordhoff International Publishing Leyden, 1974, 193.
146. Krempl, E., Models ofviscoplasticity. Some comments on equilibrium (back) stress and drag stress, Acta Mech., 69, 25, 1987.
147. Phillips, A., Liu, K., and Justusson, W.J., An experimental investigation ofyield surfaces at elevated temperatures, Acta Mech., 14, 119, 1972.
148. Phillips, A. and Kasper, R., On the foundations of thermoplasticity — an experimental investigation, J. Appl. Mech., 40, 891, 1973.
149. Phillips, A., Tang, J.-L., and Ricciuti, M., Some new observations on yield surfaces, Acta Mech., 20, 23, 1974.
150. Phillips, A. and Kawahara, W.A., The effect of thermal loading on the yield surface of aluminum, An experimental investigation, Acta Mech., 50, 249, 1984.
151. Ohashi, Y., Kawashima, K., and Yokochi, T., Anisotropy due to plastic deformation ofinitially isotropic mild steel and its analytical formulation, J. Mech. Phys. Solids, 23, 277, 1975.
152. Phillips, A. and Kaechele, L., Combined stress tests in plasticity, J. Appl. Mech., 23, 43, 1956.
153. Khan, A.S. and Wang, X., On non-proportional infinitesimal plastic deformation after finite plastic prestressing and partial unloading, J. Mech. Phys. Solids, 36, 519, 1988.
154. Mroz, Z., On the description ofanisotropic workhardening, J. Mech. Phys. Solids, 15, 163, 1967.
155. Masing, G., Wiss. Veröff. Siemens-Konzern, III Band, 1927.
156. Dafalias, Y.F. and Popov, E.P., A model of nonlinear hardening materials for complex loading, Acta Mech., 21, 173, 1975.
157. Dafalias, Y.F. and Popov, E.P., Plastic internal variables formalism of cyclic plasticity, J. Appl. Mech., 98, 645, 1976.
158. Ilyushin, A.A., On the relation between stresses and small strains in continuum mechanics, Prikl. Mat. Mekh., 18, 641, 1954 (in Russian).
159. Ilyushin, A.A., Plasticity, Izdat. Akad. Nauk. SSSR, Moscow, 1963 (in Russian).
160. Lensky, V.S., Analysis ofplastic behavior ofmetals under complex loading, in Proc. 2nd Symposium on Naval Struc. Mech., Lee, E.H. and Symonds, P.S., Eds., Brown University, Pergamon Press, 1960, 259.
161. Ohashi, Y., Tokuda, M., and Tanaka, Y., Precise experimental results on plastic behavior ofbrass under complex loading, Bull. De L’Acad. Polon. Des Sci., Ser. Sciences Tech., 26, 261, 1978.
162. Ohashi, Y., Kurita, Y., Suzuki, T., and Tokuda, M., Effect ofcurvature ofthe strain trajectory on the plastic behavior ofbrass, J. Mech. Phys. Solids, 29, 69, 1981.
163. Pipkin, A.C. and Rivlin, R.S., Mechanics ofrate-independent materials, J. Appl. Math. Phys. (ZAMP), 16, 313, 1965.
164. Zhou, Z.-D., Zhao, S.-X., and Kuang, Z.-B., An integral elasto-plastic constitutive theory, Int. J. Plasticity, 19, 1377, 2003.
165. Ilyushin, A.A., in Problems in the Theory of Plasticity, Izdat. Akad. Nauk. SSSR, Moscow, 1961, 3 (in Russian).
166. Wu, H.C. and Yang, R.J., Application ofthe improved endochronic theory of plasticity to loading with multi-axial strain-path, Int. J. Non-Linear Mech., 18, 395, 1983.
167. Wu, H.C., Yang, C.C., and Chu, S.C., Further application ofendochronic constitutive equation to loading with non-proportional axial–torsional strain-path, Int. J. Non-Linear Mech., 20, 41, 1985.
168. Wu, H.C., Aboutorabi, M.R., and Chen, P.C.T., Cyclic torsion ofa circular cylinder and its residual stress distribution, J. Eng. Mater. Technol., 107, 48, 1985.
169. Wu, H.C. and Yeh, W.C., Some considerations in the endochronic description ofanisotropic hardening, Acta Mech., 69, 59, 1987.
170. Wu, H.C. and Ho, C.C., An investigation oftransient creep by means of endochronic viscoplasticity and experiment, J. Eng. Mater. Technol., 117, 260, 1995.
171. Green, A.E. and Naghdi, P.M., Ageneral theory ofan elastic–plastic continuum, Arch. Rat. Mech. Anal., 18, 251, 1965.
172. Lee, E.H., Elastic–plastic deformations at finite strains, J. Appl. Mech., 36, 1, 1969.
173. Dafalias, Y.F., A missing link in the macroscopic constitutive formulation of large plastic deformations, in Plasticity Today, Sawczuk, A. and Bianchi, G., Eds., Elsevier Applied Science, London, 1983, 135.
174. Mandel, J., Plasticité classique et viscoplasticité, CISM Courses and Lectures 97, Springer, New York, 1971.
175. Montheillet, F., Cohen, M., and Jonas, J.J., Axial stresses and texture development during the torsion testing ofAl, Cu and A-Fe, Acta Metall., 32, 2077, 1984.
176. Stout, M.G. and O’Rourke, J.A., Experimental deformation textures of OFE copper and 70: 30 brass from wire drawing, compression and torsion, Metall. Trans. 20A, 125, 1989.
177. Toth, L.S., Jonas, J.J., Daniel, D., and Bailey, J.A., Texture development and length changes in copper bars subjected to free-end torsion, Text. Microstruct. 19, 245, 1992.
178. Wang, P.T., Panchanadeeswaran, S., and Wu, H.C., Comparison offlow stress and texture for P0815 cast aluminum deformed in compression and in torsion. Alcoa Technical Center Research Report, Alcoa Center, Pa., U.S.A., 1995.
179. Dafalias, Y.F., Plastic spin: necessity or redundancy?, Int. J. Plasticity, 14, 909, 1998.
180. Kratochvil, J., Finite strain theory ofcrystalline elastic–inelastic materials, J. Appl. Phys., 42, 1104, 1971.
181. Wang, C.C., A new representation theorem for isotropic functions: an answer to Professor G.F. Smith’s criticism of my paper on representations for isotropic functions, Arch. Rat. Mech. Anal., 36, 166, 1970.
182. Loret, B., On the effects of plastic rotation in the finite deformation of anisotropic elastoplastic materials, Mech. Mater., 2, 287, 1983.
183. Dafalias, Y.F., The plastic spin, J. Appl. Mech., 52, 865, 1985.
184. Dienes, J.K., On the analysis ofrotation and stress rate in deforming bodies, Acta Mech., 32, 217, 1979.
185. Nagtegall, J.C. and de Jong, J.E., Some aspects ofnon-isotropic workhardening in finite strain plasticity, in Proc. Workshop on Plasticity of Metals at Finite Strain: Theory, Experiment and Computation, Lee, E.H. and Mallet, R.L., Eds., Stanford University, 1981, 65.
186. Cotter, B.A. and Rivlin, R.S., Tensors associated with time-dependent stress, Quart. Appl. Math., 18, 177, 1955.
187. Oldroyd, J.G., On the formulation ofrheological equations ofstate, Proc. Roy. Soc., A, 200, 523, 1950.
188. Aifantis, E.C., The physics of plastic deformation, Int. J. Plasticity, 3, 221, 1987.
189. Wu, H.C., Xu, Z., and Wang, P.T., Torsion test ofaluminum in the large strain range, Int. J. Plasticity, 13, 873, 1998.
190. Truesdell, C., The simplest rate theory ofpure elasticity, Comm. Pure Appl. Math., 8, 123, 1955.
191. Khan, A.S. and Wang, X., An experimental study oflarge finite plastic deformation in annealed 1100 aluminum during proportional and nonproportional biaxial compression, Int. J. Plasticity, 6, 485, 1990.
192. Lee, E.H., Mallet, R.L., and Wertheimer, T.B., Stress analysis ofanisotropic hardening in finite-deformation plasticity, J. Appl. Mech., 50, 554, 1983.
193. Wu, H.C., On finite plastic deformation of anisotropic metallic materials, Int. J. Plasticity, 19, 91, 2003.
194. Wu, H.C., Effect of loading-path on the evolution of yield surface for anisotropic metals subjected to large pre-strain, Int. J. Plasticity, 19, 1773, 2003.
195. Wu, H.C. and Xu, Z., An experimental investigation ofthe axial effect during torsion, in Advances in Constitutive Laws for Engineering Materials, Fan, J. and Murakami, S., Eds., Int. Academic Publishers, Pergamon Press, Beijing, 1989, 232.
196. Valanis, K.C., The viscoelastic potential and its thermodynamic foundation, Iowa State Univ., ERI Report 52, 1967, J. Math. Phys., 48, 262, 1968.
197. Valanis, K.C., Irreversibility and existence of entropy, Int. J. Nonlinear Mech., 6, 337, 1971.
198. Valanis, K.C., Proper tensorial formulation of the internal variable theory, The endochronic time spectrum, Arch. Mech., 29, 173, 1977.
199. Valanis, K.C., A gradient theory of internal variables, Acta Mech., 116, 1, 1996.
200. Valanis, K.C., Irreversible Thermodynamics of Continuous Media, Springer-Verlag, Udine, 1971.
201. Valanis, K.C., A theory of viscoplasticity without a yield surface, Arch. Mech. 23, 517, 1971.
202. Valanis, K.C., Fundamental consequences of a new intrinsic time measure-plasticity as a limit of the endochronic theory, Arch. Mech. 32, 171, 1980.
203. Callen, H.B., Thermodynamics, John Wiley & Sons, New York, 1960, 15.
204. Coleman, B. and Gurtin, M., Thermodynamics of internal state variables, J. Chem. Phys., 47, 599, 1967.
205. Ilyushin, A.A., On the relation between stresses and small strains in continuum mechanics, Prikl. Mat. Mekh., 18, 641, 1954 (in Russian).
206. Pipkin, A.C. and Rivlin, R.S., Mechanics of rate-independent materials, J. Appl. Math. Phys. (ZAMP), 16, 313, 1965.
207. Valanis, K.C. and Wu, H.C., Endochronic representation of cyclic creep and relaxation of metals, J. Appl. Mech., 42, 67, 1975.
208. Wu, H.C. and Lin, H.C., Combined plastic waves in a thin-walled tube, Int. J. Solids Struct., 10, 903, 1974.
209. Lin, H.C. and Wu, H.C., Strain-rate effect in the endochronic theory of viscoplasticity, J. Appl. Mech., 43, 92, 1976.
210. Kosinski, W. and Wu, H.C., On steady viscoplastic waves. Endochronic theory, Bull. L’Acad. Polon. Sci., Ser. Sci. Tech., 26, 109, 1978.
211. Wu, H.C. and Yip, M.C., Finite difference solution for the uniaxial endochronic viscoplastic wave problem, J. Appl. Mech., 45, 221, 1978.
212. Jao, S.Y., Arora, J.S., and Wu, H.C., An optimization approach for material-constant determination for the endochronic constitutive model, Comput. Mech., 8, 25, 1991.
213. Wu, H.C. and Yang, R.J., Application of the improved endochronic theory of plasticity to loading with multi-axial strain-path, Int. J. Non-Linear Mech., 18, 395, 1983.
214. Wu, H.C., Yang, C.C., and Chu, S.C., Further application of endochronic constitutive equation to loading with non-proportional axial–torsional strain-path, Int. J. Non-Linear Mech., 20, 41, 1985.
215. Prager, W., The theory of plasticity: a survey of recent achievements (James Clayton Lecture), Proc. Inst. Mech. Eng., 169, 41, 1955.
216. Ziegler, H., A modification of Prager’s hardening rule, Quart. Appl. Math., 17, 55, 1959.
217. Wu, H.C. and Yip, M.C., Endochronic description of cyclic hardening behavior for metallic materials, J. Eng. Mater. Technol., 103, 212, 1981.
218. Lamba, H.S. and Sidebottom, O.M., Proportional biaxial cyclic hardening of annealed oxygen-free high-conductivity copper, J. Test. Evaluation, 6, 260, 1978.
219. Wu, H.C., Aboutorabi, M.R., and Chen, P.C.T., Cyclic torsion of a circular cylinder and its residual stress distribution, J. Eng. Mater. Technol., 107, 48, 1985.
220. Wu, H.C. and Yang, R.J., Application of the improved endochronic theory of plasticity to loading with multi-axial strain-path, Int. J. Non-Linear Mech., 18, 395, 1983.
221. Ohashi, Y., Tokuda, M., and Tanaka, Y., Precise experimental results on plastic behavior of brass under complex loading, Bull. De L’Acad. Polon. Des Sci., Ser. Sci. Tech., 26, 261, 1978.
222. Ohashi, Y., Tokuda, M., Mitake, T., Kurita, Y., and Suzuki, T., Stress–strain relation of integral type for deformation of brass along strain trajectories consisting of three normal straight branches, Archs. Mech., 32, 125, 1980.
223. Ohashi, Y., Tokuda, M., Suzuki, T., and Kurita, Y., Stress–strain relation of brass for the plastic deformation along bi-linear strain trajectories with various corner angles, Bull. Japan. Soc. Mech. Eng., 24, 1909, 1981.
224. Wu, H.C., Yang, C.C., and Chu, S.C., Further application of endochronic constitutive equation to loading with non-proportional axial–torsional strain-path, Int. J. Non-Linear Mech., 20, 41, 1985.
225. Wu, H.C., Yao, J.C., and Chu, S.C., Investigation of endochronic constitutive equation subjected to plastic strain-controlled axial-torsional deformation, J. Eng. Mater. Technol., 108, 262, 1986.
226. Wu, H.C. and Yeh, W.C., Further verification of endochronic theory under biaxial load, J. Eng. Mater. Technol., 111, 115, 1989.
227. Valanis, K.C. and Fan, J., Endochronic analysis of cyclic elastoplastic strain fields in a notched plate, J. Appl. Mech., 50, 789, 1983.
228. Valanis, K.C. and Lee, C.F., Endochronic theory of cyclic plasticity with application, J. Appl. Mech., 51, 367, 1984.
229. Watanabe, O. and Atluri, S.N., A new endochronic approach to computational elastoplasticity: example of a cyclically loaded cracked plate, J. Appl. Mech., 52, 857, 1985.
230. Watanabe, O. and Atluri, S.N., Internal time, general internal variable, and multi-yield-surface theories of plasticity and creep: a unification of concepts, Int. J. Plasticity, 2, 37, 1986.
231. Perzyna, P., The constitutive equations for rate sensitive plastic materials, Quart. Appl. Math., 20, 321, 1963.
232. Phillips, A. and Wu, H.C., A theory of viscoplasticity, Int. J. Solids Struct., 9,15, 1973.
233. Krempl, E., Models of viscoplasticity. Some comments on equilibrium (back) stress and drag stress, Acta Mech., 69, 25, 1987.
234. Lin, H.C. and Wu, H.C., Strain-rate effect in the endochronic theory of viscoplasticity, J. Appl. Mech., 43, 92, 1976.
235. Wu, H.C. and Yip, M.C., Finite difference solution for the uniaxial endochronic viscoplastic wave problem, J. Appl. Mech., 45, 221, 1978.
236. Kosinski, W. and Wu, H.C., On steady viscoplastic waves. Endochronic theory, Bull. L’Acad. Polon. Scien., Ser. Sci. Tech., 26, 109, 1978.
237. Wu, H.C. and Yip, M.C., Strain rate and strain rate history effects on the dynamic behavior of metallic materials, Int. J. Solids Struct., 16, 515, 1980.
238. Lin, H.C. and Wu, H.C., On the rate-dependent endochronic theory of viscoplasticity and its application to plastic-wave propagation, Int. J. Solids Struct., 19, 587, 1983.
239. Wu, H.C. and Ho, C.C., An investigation of transient creep by means of endochronic viscoplasticity and experiment, J. Eng. Mater. Technol., 117, 260, 1995.
240. Karnes, C.H. and Ripperger, E.A., Strain-rate effect in cold worked high-purity aluminum, J. Mech. Phys. Solids, 14, 75, 1966.
241. Cambell, J.D. and Marsh, K.J., The effect of strain-rate on the post-yield flow of mild steel, J. Mech. Phys. Solids, 11, 49, 1963.
242. Robinson, D.N., On thermomechanical testing in support of constitutive equation development for high temperature alloys, NASA CR 174879, 1985.
243. Wu, H.C., Hong, H.K., and Lu, J.K., An endochronic theory accounted for deformation induced anisotropy, Int. J. Plasticity, 11, 145, 1995.
244. Wu, H.C. and Lu, J.K., Further development and application of an endochronic theory accounted for deformation induced anisotrophy, Acta Mech., 109, 11, 1995.
245. Wu, H.C. and Ho, C.C., Strain hardening of annealed 304 stainless steel by creep, J. Eng. Mater. Technol., 115, 345, 1993.
246. Miller, A.K., An inelastic constitutive model for monotonic, cyclic, and creep deformation, J. Eng. Mater. Technol., 98, 97, 1976.
247. Wu, H.C. and Yeh, W.C., On the experimental determination of yield surfaces and some results of annealed 304 stainless steel, Int. J. Plasticity, 7, 803, 1991.
248. Wu, H.C. and Yeh, W.C., Some considerations in the endochronic description of anisotropic hardening, Acta Mech., 69, 59, 1987.
249. Ohashi, Y., Tokuda, M., Mitake, T., Kurita, Y., and Suzuki, T., Stress–strain relation of integraltype for deformation of brass along strain trajectories consisting of three normalstraight branches, Arch. Mech., 32, 125, 1980.
250. Ohashi, Y., Tokuda, M., Suzuki, T., and Kurita, Y., Stress–strain relation of brass for the plastic deformation along bi-linear strain trajectories with various corner angles, Bull. Japan. Soc. Mech. Eng., 24, 1909, 1981.
251. Wu, H.C., Hong, H.K., and Lu, J.K., An endochronic theory accounted for deformation induced anisotropy, Int. J. Plasticity, 11, 145, 1995.
252. Wu, H.C., Lu, J.K., and Pan, W.F., Endochronic equations for finite plastic deformation and application to metal tube under torsion, Int. J. Solids Struct., 32, 1079, 1995.
253. Phillips, A. and Tang, J.L., The effect of loading path on the yield surface at elevated temperatures, Int. J. Solids Struct., 8, 463, 1972.
254. Wu, H.C. and Yeh, W.C., On the experimentaldetermination of yield surfaces and some results of annealed 304 stainless steel, Int. J. Plasticity, 7, 803, 1991.
255. Wu, H.C. and Lu, J.K., Further development and application of an endochronic theory accounted for deformation induced anisotropy, Acta Mech., 109, 11, 1995.
256. Wu, H.C. and Hong, H.K., Endochronic description of plastic anisotropy in sheet metal, Int. J. Solids Struct., 36, 2735, 1999.
257. Hill, R., A theory of yielding and plastic flow of anisotropic materials, Proc. Roy. Soc., London, A, 193, 281, 1948.
258. Valanis, K.C., A theory of viscoplasticity without a yield surface, Arch. Mech. 23, 517, 1971.
259. Valanis, K.C., Proper tensorial formulation of the internal variable theory, The endochronic time spectrum, Arch. Mech., 29, 173, 1977.
260. Valanis, K.C., Back stress and Jaumann rates in finite plasticity, Int. J. Plasticity, 6, 353, 1990.
261. Dafalias, Y.F., Plastic spin: necessity or redundancy?, Int. J. Plasticity, 14, 909, 1998.
262. Im, S. and Atluri, S.N., A study of two finite strain plasticity models: an internaltime theory using Mandel’s director concept, and a general isotropic/kinematic-hardening theory, Int. J. Plasticity, 3, 163, 1987.
263. Goddard, J.D. and Miller, C., An inverse for the Jaumann derivative and some applications to the rheology of viscoelastic fluids, Rheol. Acta, 5, 177, 1966.
264. Dafalias, Y.F., Corotationalintegralin constitutive formulations, J. Eng. Mech., 113, 1967, 1987.
265. Swift, H.W., Length change in metalunder torsionaloverstrain, Engineering, 163, 253, 1947.
266. Hart, E.W. and Chang, Y.W., Materialrotation effects in tension–torsion test: experimentalresult, in Plasticity Today, Sawczuck, A. and Bianchi, G.E., Eds., Elsevier Appl. Sci., U.K., 1985, 235.
267. White, C.S., Bronkhorst, C.A., and Anand, L., An improved isotropic-kinematic hardening modelfor moderate deformation metalplasticity, Mech. Mater., 10, 127, 1990.
268. Wu, H.C. and Xu, Z.Y., An extensometer investigation of the axialeffect during torsion. Proc. Int. Conf. on Constitutive Laws for Eng. Material, Fan, J. and Murakami, S., Eds., Chongqing, China, 1989, 232.
269. Bailey, J.A., Haas, S.L., and Nawab, K.C., Anisotropy in Plastic Torsion, J. Basic Eng., 94, 231, 1972.
270. Wu, H.C., Xu, Z., and Wang, P.T., Torsion test of aluminum in the large strain range, Int. J. Plasticity, 13, 873, 1998.
271. Canova, G.R., Kocks, U.F., and Jonas, J.J., Theory of torsion texture development, Acta Metall., 32, 211, 1984.
272. Taylor, G.I. and Quinney, H., The plastic distortion of metal, Phil. Trans. Roy. Soc., A, 230, 323, 1932.
273. Lowe, T.C. and Lipkin, J., Analysis of axial deformation response during reverse shear, Sand 90-8417, Sandia National Lab., 1990.
274. Qian, Z. and Wu, H.C., A 2-D texture study based on a double-slip model of polycrystal plasticity with analysis of thin-walled tube under torsion, Int. J. Solids Struct., 33, 4167, 1996.
275. Wu, H.C. and Aboutorabi, M.R., Endochronic modeling of coupled volumetric–deviatoric behavior of porous and granular materials, Int. J. Plasticity, 4, 163, 1988.
276. Wu, H.C., An endochronic theory for porous and granular materials, in Modern Approaches to Plasticity, Kolymbas, D., Ed., Elsevier, Amsterdam, 1993, 347.
277. Johnson, J.N. and Green, S.J., Mechanicalresponse of porous media subject to static load, in Effects of Voids on Material Deformation, Cowin, S.C. and Carroll, M.M., Eds., AMD-16, ASME, New York, 1976, 93.
278. Scavuzzo, R., Stankowski, T., Gerstle, K.H., and Ko, H.Y., Stress–strain curves for concrete under multiaxial load histories, Report, Department of Civil, Environmentaland ArchitecturalEngineering, University of Colorado, Boulder, CO, 1983.
279. Wu, H.C., Wang, Z.K., and Aboutorabi, M.R., Endochronic modeling of sand in true triaxialtest, J. Eng. Mech., ASCE, 111, 1257, 1985.
280. Bazant, Z.P. and Krizek, R.J., Endochronic constitutive law for liquefaction of sand, J. Eng. Mech. Div., ASCE, 102, 225, 1976.
281. Valanis, K.C. and Read, H.E., A new endochronic plasticity model for soils, in Soil Mechanics-Transient and Cyclic Loads, Pande, G.N. and Zienkiewicz, O.C., Eds., John Wiley, New York, 1982.
282. Valanis, K.C. and Peters, J.F., Configurational plasticity in granular media, in Modern Approaches to Plasticity, Kolymbas, D., Ed., Elsevier, Amsterdam, 1993, 1.
283. Wu, H.C., Wang, T.P., Endochronic description of sand response to static loading, J. Eng. Mech., ASCE, 109, 970, 1983.
284. Lade, P.V., Elasto-plastic stress–strain theory for cohesiveless soil with curved yield surfaces, Int. J. Solids Struct., 13, 1019, 1977.
285. Cuellar, V., Bazant, Z.P., Krizek, R.J., and Silver, M.L., Densification and hysteresis of sand under cyclic shear, J. Geotechn. Eng. Division, ASCE, 103, 399, 1977.
286. Lee, K.L. and Seed, H.B., Drained strength characteristics of sands, J. Soil Mech. Found. Div., ASCE, 93, 117, 1967.
287. Wu, H.C. and Sheu, J.C., Endochronic modeling for shear hysteresis of sand, J. Geotechn. Eng., ASCE, 109, 1539, 1983.
288. Silver, M.L. and Seed, H.B., Deformation characteristic of sand under cyclic loading, J. Soil Mech. Found. Div., ASCE, 97, 1081, 1971.
289. Wu, H.C. and Aboutorabi, M.R., Endochronic modelof sand with circular stress path, J. Geotechn. Eng., ASCE, 114, 93, 1988.
290. Aboutorabi, M.R., Wu, H.C., Wang, T.P., and Gao, Q.Y., Stress–strain behavior of porous aluminum, in Proc. 2nd International Conf. on Constitutive Laws for Engineering Materials: Theory and Application, Desai, C.S., Krempl, E., Kiousis, P.D., and Kundu, T., Eds., Elsevier, New York, 1987, 477.
291. Wang, P.T. and Wu, H.C., An endochronic modelfor compaction of porous metals, Prog. Powder Metall., 41, 161, 1986.
292. Schock, R.N., Abey, A.E., and Duba A., Quasi-static deformation of porous beryllium and aluminum, J. Appl. Phys., 47, 53, 1976.
293. Wu, H.C., Wang, P.T., Pan, W.F., and Xu, Z.Y., Cyclic stress–strain response of porous aluminum, Int. J. Plasticity, 6, 207, 1990.
294. Kachanov, L.M., On the time to failure during creep, Izv. AN. SSSR., OTN.337,1958.
295. Lemaitre, J. and Chaboche, J.L., Aspects phénoménologique ge la rupture par endommagement, J. Méc. Appl., 2, 167, 1978.
296. Sidoroff, F., Description of anisotropic damage application to elasticity, in Physical Non-Linearities in Structure Analysis-IUTAM, Hult, J. and Lemaitre, J., Eds., Springer-Verlag, New York, 1981, 237.
297. Lemaitre, J. and Chaboche, J.L., Mécanique des Matériaux Solides, Paris: Dunod; English Edition, Cambridge University Press, 1985.
298. Chow, C.L. and Lu, T.J., A comparative study of continuum damage models for crack propagation under gross yielding, Int. J. Fract., 53, 43, 1992.
299. Chaboche, J.L., Sur l’utilisation des variables d’état interne pour la description du comportement viscoplastique et de la rupture par endommagement, Symposium Franco-Polonais de Rhéologie et Mécanique, Cracovie, 1977.
300. Lemaitre, J., Acontinuum damage mechanics modelfor ductile fracture, J. Eng. Mater. Technol., 107, 83, 1985.
301. Wu, H.C. and Nanakorn, C.K., A constitutive framework of plastically deformed damaged continuum and a formulation using the endochronic concept, Int. J. Solids Struct., 36, 5057, 1999.
302. Murakami, S. and Ohno, N., A continuum theory of creep and creep damage, in Creep Structures, Ponter A.R.S. and Hayhust, D.R., Eds., Springer, Berlin, 1981, 922.
303. Betten, J., Damage tensors in continuum mechanics, J. Mecanique theorique et appliqué, 2, 13, 1983.
304. Rabotnov, Y.N., Creep Problems in Structural Members, North-Holland Series in Applied Math. and Mech., Vol. 7, Chap. 6, North-Holland, Amsterdam,1969.
305. Cordebois, J.P. and Sidoroff, F., Damage induced elastic anisotropy, Comportement mecanique des solides anisotropes, EUROMECH, 115, Proc. Coll., Int. du C.N.R.S., Boehler J.P. Ed., Villard-de-Lens, France, 1979, 761.
306. Chow, C.L. and Wang, J., An anisotropic theory of elasticity for continuum damage mechanics. Int. J. Fract., 33, 3, 1987.
307. Stumvoll, M. and Swobada, G., Deformation behavior of ductile solids containing anisotropic damage, J. Eng. Mech., 119, 1331, 1993.
308. Rabotnov, Y.N., Creep rupture, in Proceedings, Applied Mechanics Conference, Hetenyi, M. and Vincenti, H., Eds., Standford University, 1968, 342.
309. Chow, C.L. and Lu, T.J., On evolution laws of anisotropic damage, Eng. Fract. Mech., 34, 679, 1989.
310. Valanis, K.C., Irreversible Thermodynamics of Continuous Media, Springer-Verlag, Udine, 1971.
311. Krajcinovic, D., Continuous damage mechanics revisited: basic concepts and definition, ASME, J. Appl. Mech., 52, 829, 1985.
312. Wu, H.C. and Nanakorn, C.K., An endochronic theory of continuum damage mechanics, ASCE, J. Eng. Mech., 124, 200, 1998.
313. Valanis, K.C., A theory of damage in brittle materials, Eng. Fract. Mech., 36, 403, 1990.
314. Niu, X., Endochronic plastic constitutive equations coupled with isotropic damage and damage evolution models, Eur. J. Mech., A/Solids, 8, 293, 1989.
315. Chow, C.L. and Chen, X.F., An anisotropic modelof damage mechanics based on endochronic theory of plasticity, Int. J. Fract., 55, 115, 1992.
316. Fonseka, G.U. and Krajcinovic, D., The continuous damage theory of brittle materials, part 2: uniaxial and plane response modes. J. Appl. Mech., 48, 816, 1981.
317. Annual Book of ASTM Standards, Metal Test Methods and Analytical Procedures, ASTM, West Conshohocken, PA, 301, 1996, 481.
318. Mellor, P.B., Experimental studies ofplastic anisotropy in sheet metal, in Mechanics of Solids, Hopkins, H.G. and Sewell, M.J., Eds., Pergamon Press, Great Britain, 1982, 383.
319. Lin, S.B. and Ding, J.L., Experimental study ofthe plastic yielding ofrolled sheet metals with the cruciform plate specimen, Int. J. Plasticity, 11, 583, 1995.
320. Szczepinski, W., On the effect of plastic deformation on yield condition, Arch. Mech., 15, 275, 1963.
321. Lee, D. and Backofen, W.A., An experimental determination of the yield locus for titanium and titanium-alloy sheet, Trans. Met. Soc., AIME, 236, 1077, 1966.
322. Lege, D.J., Barlat, F., and Brem, J.C., Characterization and modeling ofthe mechanical behavior and formability of a 2008-T4 sheet sample, Int. J. Mech. Sci., 31, 549, 1989.
323. Naruse, K., Dodd, B., and Motoki, Y., Evaluation ofyield criteria for planar anisotropy in sheet metals using experimental results, in Advances in Engineering Plasticity and Its Applications, Proceedings of the Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications – AEPA92, Hong Kong, Lee, W.B., Ed., 1993, 235.
324. Kreissig, R. and Schindler, J., Some experimental results on yield condition in plane stress state, Acta Mech., 65, 169, 1986.
325. Tozawa, Y., Plastic deformation behavior under conditions of combined stress, in Mechanics of Sheet Metal Forming, Koistinem, D.P. and Wang, N.M., Eds., Plenum, New York, 1978, 81.
326. Barlat, F., Becker, R.C., Hayashida, Y., Maeda, Y., Yanagawa, M., Chung, K., Brem, J.C., Lege, D.J., Matsui, K., Murtha, S.J., and Hattori, S., Yielding description for solution strengthened aluminum alloys, Int. J. Plasticity, 13, 385, 1997.
327. Hill, R., A theory ofyielding and plastic flow ofanisotropic metals, Proc. Roy. Soc. London, A193, 281, 1948.
328. Hill, R., The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950, 317.
329. Makinde, A., Thibodeau, L., and Neale, K.W., Development ofan apparatus for biaxial testing using cruciform specimens, Exp. Mech., 32, 138, 1992.
330. Pearce, R., Some aspects ofanisotropic plasticity in sheet metals, Int. J. Mech. Sci., 10, 995, 1968.
331. Woodthorpe, J. and Pearce, R., The anomalous behavior ofaluminum sheet under balanced biaxial tension, Int. J. Mech. Sci., 12, 341, 1970.
332. Hill, R., Theoretical plasticity oftextured aggregates, Proc. Camb. Phil. Soc., 85, 179, 1979.
333. Hill, R., Constitutive modeling oforthotropic plasticity in sheet metal, J. Mech. Phys. Solids, 38, 405, 1990.
334. Hosford, W.F., On yield loci of anisotropic cubic metals, 7th North Am. Metalworking Conf., SME, Dearborn, MI, 1979, 191.
335. Gotoh, M., A theory ofplastic anisotropy based on a yield function offourth order, Int. J. Mech. Sci., 19, 505, 1977.
336. Barlat, F. and Lian, J., Plastic behavior and stretchability ofsheet metals. Part I, A yield function for orthotropic sheet under plane stress conditions, Int. J. Plasticity, 5, 5, 1989.
337. Hill, R., A user-friendly theory of orthotropic plasticity in sheet metals, Int. J. Mech. Sci., 35, 19, 1993.
338. Hill, R., Hecker, S.S., and Stout, M.G., An investigation ofplastic flow and differential work hardening in orthotropic brass tubes under fluid pressure and axial load, Int. J. Solids Struct., 31, 2999, 1994.
339. Barlat, F., Lege, D.J., and Brem, J.C., A six-component yield function for anisotropic materials, Int. J. Plasticity, 7, 693, 1991.
340. Karafillis, A.P. and Boyce, M.C., A general anisotropic yield criterion using bounds and a transformation weighting tensor, J. Mech. Phys. Solids, 41, 1859, 1993.
341. Cao, J., Yao, H., Karafillis, A.P., and Boyce, M.C., Prediction oflocalized thinning in sheet metal using a general anisotropic yield criterion, Int. J. Plasticity, 16, 1105, 2000.
342. Yoon, J.W., Barlat, F., Chung, K., Pourboghrat, F., and Yang, D.Y., Earing predictions based on asymmetric nonquadratic yield function, Int. J. Plasticity, 16, 1075, 2000.
343. Chakrabarty, J., A new yield function for planar anisotropy in sheet metal, Ad. Mater. Process. Technol., City University, Dublin, 1993.
344. Taylor, G.I., Plastic strain in metals, J. Inst. Metals, 62, 307, 1938.
345. Bishop, J.W.F. and Hill, R., A theoretical derivation ofthe plastic properties ofa polycrystalline face-centered metal, Phil. Mag. 42, 414, and 1298, 1951.
346. Barlat, F. and Richmond, O., Prediction oftricomponent plane stress yield surfaces, associated flow and failure behavior of strongly textured f.c.c. polycrystalline sheets, Mat. Sci. Eng., 95, 15, 1987.
347. Lademo, O.-G., Hopperstad, O.S., and Langseth, M., An evaluation of yield criteria and flow rules for aluminum alloys, Int. J. Plasticity, 15, 191, 1999.
348. Wu, H.C., Hong, H.K., and Shiao, Y.P., Anisotropic plasticity with application to sheet metals, Int. J. Mech. Sci., 41, 703, 1999 (Some ofthe discussions given in Sections 10.4 and 10.5 were from this paper. It is included with permission from Elsevier).
349. Wu, H.C. and Loureiro, M., An anisotropic plasticity for sheet metals, in The Integration of Material, Process and Product Design, Zabaras, N., Becker, R., Ghosh, S., and Lalli, L., Eds., A.A. Balkema, Rotterdam, 1999, 93.
350. Wu, H.C., Anisotropic plasticity for sheet metals using the concept of combined isotropic–kinematic hardening, Int. J. Plasticity, 18, 1661, 2002.
351. Cho, H.W. and Dafalias, Y.F., Distortional and orientational hardening at large viscoplastic deformations, Int. J. Plasticity, 12, 903, 1996.
352. Wu, H.C. and Yip, M.C., Endochronic description ofcyclic hardening behavior for metallic materials, J. Eng. Mat. Technol., 103, 212, 1981.
353. Prager, W., The theory ofplasticity: a survey ofrecent achievements (James Clayton Lecture), Proc. Inst. Mech. Eng., 169, 41, 1955.
354. Simo, J.C. and Hughes, T.J.R., Computational Inelasticity, Springer-Verlag, New York, 1998.
355. Shiao, Y.P., A study on multiaxial cyclic loading and anisotropic plasticity of structural metals, Ph.D. thesis, National Taiwan University, Taiwan, 2000.
356. Synge, J.L. and Schild, A., Tensor Calculus, University of Toronto Press, Toronto, 1949.
357. Green, A.E. and Zerna, W., Theoretical Elasticity, Clarendon Press, Oxford, 1954.
358. Flügge, W., Tensor Analysis and Continuum Mechanics, Springer-Verlag, Berlin, 1972.
359. Sedov, L.I., A Course in Continuum Mechanics, Vol. 1, Wolters-Noordhoff Publishing, Groningen, The Netherlands, 1971.
360. Fung, Y.C., Foundations of Solid Mechanics, Prentice-Hall, Englewood Cliffs, NJ, 1965.
361. Oldroyd, J.G., On the formulation of rheological equations of state, Proc. Roy. Soc., A, 200, 523, 1950.
362. Green, A.E. and Adkins, T.E., Large Elastic Deformations, Oxford University Press, Oxford, 1960.
363. Valanis, K.C., Back stress and Jaumann rates in finite plasticity, Int. J. Plasticity, 6, 353, 1990.
364. Wu, H.C., On finite plastic deformation of anisotropic metallic materials, Int. J. Plasticity, 19, 91, 2003.
365. Wu, H.C., On the finite plastic deformation of anisotropic metallic materials, in Proceedings of the 2001 Mechanics and Materials Summer Conference, San Diego, 2001, 240.
366. Wu, H.C., Effect of loading-path on the evolution of yield surface for anisotropic metals subjected to large pre-strain, Int. J. Plasticity, 19, 1773, 2003.
367. Montheillet, F., Cohen, M., and Jonas, J.J., Axial stresses and texture development during the torsion testing on Al, Cu and a-Fe, Acta Metall., 32, 2077, 1984.
368. Stout, M.G. and O’Rourke, J.A., Experimental deformation textures of OFE copper and 70: 30 brass from wire drawing, compression and torsion, Metall. Trans., 20A, 125, 1989.
369. Toth, L.S., Jonas, J.J., Daniel, D., and Bailey, A., Texture development and length changes in copper bars subjected to free end torsion, Textures Microstruct, 19, 245, 1992.
370. Wang, P.T., Panchanandeeswaran, S., and Wu, H.C., Comparison of flow stress and texture for P0818 cast aluminum deformed in compression and in torsion. Alcoa Technical Center Research Report, 1995.
371. Canova, G.R., Kocks, U.F., and Jonas, J.J., Theory of torsion texture development, Acta Metall., 32, 211, 1984.
372. Canova, G.R., Kocks, U.F., Tome, C.N., and Jonas, J.J., The yield surface of textured polycrystals, J. Mech. Phys. Solids, 33, 371, 1985.
373. Harren, S., Lowe, T.C., Asaro, R.J., and Needleman, A., Analysis of large-strain shear in rate-dependent face-centered cubic polycrystals: correction of micro-and macromechanics, Phyil. Trans. R. Soc. Lond., A, 328, 443, 1989.
374. Toth, L.S., Gilormini, P., and Jonas, J.J., Effect of rate sensitivity on the stability of torsion textures, Acta Metall., 36, 3077, 1988.
375. Toth, L.S., Neale, K.W., and Jonas, J.J., Stress response and persistence characteristics of the ideal orientations of shear textures, Acta Metall., 37, 2197, 1989.
376. Toth, L.S., Jonas, J.J., Gilormini, P., and Barcroix, B., Length changes during free-end torsion: a rate sensitive analysis, Int. J. Plasticity, 6, 83, 1990.
377. Qian, Z. and Wu, H.C., A 2-D texture study based on a double-slip model of polycrystal plasticity with analysis of thin-walled tubes under torsion, Int. J. Solids Struct., 33, 4167, 1996.
378. Dafalias, Y.F., Plastic spin: necessity or redundancy?, Int. J. Plasticity, 14, 909, 1998.
379. Wu, H.C. and Yip, M.C., Endochronic description of cyclic hardening behavior for metallic materials, J. Eng. Mater. Technol., 103, 212, 1981.
380. Prager, W., The theory of plasticity: a survey of recent achievements (James Clayton Lecture), Proc. Inst. Mech. Eng., 169, 41, 1955.
381. Swift, H.W., Length changes in metals under torsional overstrain, Engineering, 163, 253, 1947.
382. Wu, H.C., On finite plastic deformation of anisotropic metallic materials, Int. J. Plasticity, 19, 91, 2003.
383. Wu, H.C., Effect of loading-path on the evolution of yield surface for anisotropic metals subjectedto large pre-strain, Int. J. Plasticity, 19, 1773, 2003.
384. Hill, R., A theory of yielding and plastic flow of anisotropic metals, Proc. Roy. Soc. London, A193, 281, 1948.
385. Helling, D.E., Miller, A.K., andStout, M.G., An experimental investigation of the yieldloci of 1100-0 aluminum, 70:30 brass, andan oberaged2024 aluminum alloy after various prestrains, J. Eng. Mater. Technol., 108, 313, 1986.
386. Hill, R., The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950, 332.
387. Hosford, W.F. and Caddell, R.M., Metal Forming-Mechanics and Metallurgy, 2ndEdn., PTR Prentice Hall, EnglewoodCliffs, NJ, 1993, 276.
388. Wu, H.C. and Yip, M.C., Endochronic description of cyclic hardening behavior for metallic materials, J. Eng. Mater. Technol., 103, 212, 1981.
389. Qian, Z. and Wu, H.C., A 2-D texture study based on a double-slip model of polycrystal plasticity with analysis of thin-walledtubes under torsion, Int. J. Solids Struct., 33, 4167, 1996.
390. Prager, W., The theory of plasticity: a survey of recent achievements (James Clayton Lecture), Proc. Inst. Mech. Eng., 169, 41, 1955.
391. Simo, J.C. andHughes, T.J.R., Computational Inelasticity, Springer-Verlag, New York, 1998.
392. Wu, H.C. andYang, R.J., Application of the improvedendochronic theory of plasticity to loading with multi-axial strain-path, Int. J. Non-Linear Mech., 18, 1983, 395.
393. Wu, H.C., Yang, C.C., andChu, S.C., Further application of endochronic constitutive equation to loading with non-proportional axial-torsional strain-path, Int. J. Non-Linear Mech., 20, 1985, 41.
394. Armstrong, P.J. andFrederick, C.O., Amathematical representation of the multiaxial Bauschinger effect, G.E.G.B. Report RD/B/N 731, Berceley Nuclear Laboratories, 1966.
395. Wu, H.C., The evolution of yieldsurface in the finite strain range, presented at 16th ASCE Engineering Mechanics Conference, University of Washington, Seattle, July 16–18, 2003 (paper submittedto International Journal for Plasticity for publication).
396. Wu, H.C., Lu, J.K., andPan, W.F., Some observations on yieldsurfaces for 304 stainless steel at large strain, J. Appl. Mech., 62, 626, 1995.
397. Wu, H.C., Xu, Z., andWang, P.T., Torsion test of aluminum in the large strain range, Int. J. Plasticity, 13, 873, 1998.
398. Phillips, A. andKaechele, L., Combinedstress tests in plasticity, J. Appl. Mech., 23, 43, 1955.
399. Ohashi, Y., Tokuda, M., and Tanaka, Y., Precise experimental results on plastic behavior of brass under complex loading, Bull. De L’Acad. Polon. Des Sci., Ser. Sciences Tech., 26, 261, 1978.
400. Wu, H.C., Yang, C.C., andChu, S.C., Further application of endochronic constitutive equation to loading with non-proportional axial–torsional strain-path, Int. J. Non-Linear Mech., 20, 1985, 41.
401. Khan, A.S. andWang, X., On non-proportional infinitesimal plastic deformation after finite plastic prestressing andpartial unloading, J. Mech. Phys. Solids, 36, 519, 1988.