Contaminant-induced degradation

PEM Fuel Cell Failure Mode Analysis

Volumn , Issue , 2011, Pages 199-241

  Baturina, Olga A ^a   Garsany, Yannick ^a,b   Gould, Benjamin D ^a   Swider Lyons, Karen E ^a  

^a NAVAL RESEARCH LABORATORY   (United States)

^b EXCET INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85055440898     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (99)

1. Abd Elhamid, M. H., Mikhail, Y. M., and Blunk, R. H. 2006. Devices incorporating porous diffusion media and bipolar plate assembly with anion exchange resin. US Patent 2006029859.
2. Abdou, M., Xie, T., and Andrin, P. 2004. Method for regeneration of performance in a fuel cell. WO Patent 2004030118.
3. Adams, W. A., Gardner, C. L., Dunn, J. H., and Vered, R. 2003. Fuel cell operational health management system. WO Patent 2003083975.
4. Ahn, S. Y., Shin, S. J., Ha, H. Y. et al. 2002. Performance and lifetime analysis of the kW-class PEMFC stack. Journal of Power Sources 106: 295-303.
5. Al-Saleh, M. A., Gultekin, S., Al-Zakri, A. S., and Celiker, H. 1994. Effect of carbon dioxide on the performance of Ni/PTFE and Ag/PTFE electrodes in an alkaline fuel cell. Journal of Applied Electrochemistry 24: 575-580.
6. 3Co/VC and Pt/VC catalysts. Electrochimica Acta 55: 6676-6686.
7. 2 on the performance of the cathode of a PEM fuel cell at 0.5-0.7 V. Journal of the Electrochemical Society 156: B1423-B1430.
8. Bender, G., Angelo, M., Bethune, K., Dorn, S., Thampan, T., and Rocheleau, R. 2009. Method using gas chromatography to determine the molar flow balance for proton exchange membrane fuel cells exposed to impurities. Journal of Power Sources 193: 713-722.
9. Bhatia, K. K. and Wang, C.-Y. 2004. Transient carbon monoxide poisoning of a polymer electrolyte fuel cell operating on diluted hydrogen feed. Electrochimica Acta 49: 2333-2341.
10. Borup, R., Meyers, J., Pivovar, B. et al. 2007. Scientific aspects of polymer electrolyte fuel cell durability and degradation. Chemical Reviews 107: 3904-3951.
11. Budinski, K. G. and Budinski, M. K. 2005. Engineering Materials: Properties and Selection. Upper Saddle River, NJ: Prentice-Hall.
12. Chan, S. H., Goh, S. K., and Jiang, S. P. 2003. A mathematical model of polymer electrolyte fuel cell with anode CO kinetics. Electrochimica Acta 48: 1905-1919.
13. Cheng, X., Shi, Z., Glass, N. et al. 2007. A review of PEM hydrogen fuel cell contamination: Impacts, mechanisms, and mitigation. Journal of Power Sources 165: 739-756.
14. Colbow, K. M., Van Der Geest, M., Longley, C. J. et al. 2001. Method and apparatus for operating an electrochemical fuel cell with periodic reactant starvation. WO Patent 2001001508.
15. Contractor, A. Q. and Lal, H. 1978. Two forms of chemisorbed sulfur on platinum and related studies. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry 96: 175-181.
16. Das, S. K., Reis, A., and Berry, K. J. 2009. Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell. Journal of Power Sources 193: 691-698.
17. Fenton, H. J. H. 1894. Oxidation of tartaric acid in presence of iron. Journal of the Chemical Society, Transactions 65: 899-910.
18. 2 impact on ORR in PEM fuel cells: A coupled experimental and multi-scale modeling approach. ECS Transactions 25: 1595-1604.
19. 3Co/Vulcan carbon electrocatalysts for oxygen reduction. ECS Transactions 11: 863-875.
20. Garsany, Y., Baturina, O. A., and Swider-Lyons, K. E. 2007b. Impact of sulfur dioxide on the oxygen reduction reaction at Pt/Vulcan carbon electrocatalysts. Journal of the Electrochemical Society 154:B670-B675.
21. 2- contaminated Pt3Co and Pt/Vulcan carbon electrocatalysts. Journal of the Electrochemical Society 156: B848-B855.
22. Garsany, Y., Baturina, O. A., Swider-Lyons, K. E., and Kocha, S. S. 2010. Experimental methods for quantifying the activity of platinum electrocatalysts for the oxygen reduction reaction. Analytical Chemistry 82: 6321-6328.
23. Garsany, Y., Gould, B. D., Baturina, O. A., and Swider-Lyons, K. E. 2009b. Comparison of the sulfur poisoning of PBI and Nafion PEMFC cathodes. Electrochemical and Solid-State Letters 12:B138-B140.
24. Garzon, F. H., Lopes, T., Rockward, T. et al. 2009. The impact of impurities on long term PEMFC performance. ECS Transactions 25: 1575-1583.
25. Garzon, F. H., Rockward, T., Urdampilleta, I. G., Brosha, E. L., and Uribe, F. A. 2006. The impact of hydrogen fuel contaminates on long-term PEMFC performance. ECS Transactions 3: 695-703.
26. Gasteiger, H. A., Kocha, S. S., Sompalli, B., and Wagner, F. T. 2005. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs. Applied Catalysis B-Environmental 56: 9-35.
27. Gottesfeld, S. 1992. Prevention of carbon monoxide poisoning in fuel cells. US Patent 279694.
28. 2S and COS. Journal of Power Sources 188: 89-95.
29. 2-contaminated proton exchange membrane fuel cells. Journal of the Electrochemical Society 157: B1569-B1577.
30. Gould, B. D., Chen, X., and Schwank, J. W. 2007. Dodecane reforming over nickel-based monolith catalysts. Journal of Catalysis 250: 209-221.
31. Halseid, R., Bystron, T., and Tunold, R. 2006a. Oxygen reduction on platinum in aqueous sulphuric acid in the presence of ammonium. Electrochimica Acta 51: 2737-2742.
32. Halseid, R., Heinen, M., Jusys, Z., and Behm, R. J. 2008. The effect of ammonium ions on oxygen reduction and hydrogen peroxide formation on polycrystalline Pt electrodes. Journal of Power Sources 176:435-443.
33. Halseid, R., Vie, P. J. S., and Tunold, R. 2006b. Effect of ammonia on the performance of polymer electrolyte membrane fuel cells. Journal of Power Sources 154: 343-350.
34. Huang, C. Y., Chen, Y. Y., Su, C. C., and Hsu, C. F. 2007. The cleanup of CO in hydrogen for PEMFC applications using Pt, Ru, Co, and Fe in PROX reaction. Journal of Power Sources 174: 294-301.
35. Huang, J. C., Sen, R. K., and Yeager, E. 1979. Oxygen reduction on platinum in 85% orthophosphoric acid. Journal of the Electrochemical Society 126: 786-792.
36. Imamura, D. and Hashimasa, Y. 2007. Effect of sulfur-containing compounds on fuel cell performance. ECS Transactions 11: 853-862.
37. − on degradation of PEMFC. 2009 Fuel Cell Seminar Extended Abstracts: LRD 25-49.
38. Imamura, D. and Yamaguchi, E. 2009b. Effect of air contaminants on electrolyte degradation in polymer electrolyte membrane fuel cells. ECS Transactions 25: 813-819.
39. Inaba, M., Kinumoto, T., Kiriake, M. et al. 2006. Gas crossover and membrane degradation in polymer electrolyte fuel cells. Electrochimica Acta 51: 5746-5753.
40. Jing, F. N., Hou, M., Shi, W. Y., Fu, J., Yu, H. M., Ming, P. W., and Yi, B. L. 2007. The effect of ambient contamination on PEMFC performance. Journal of Power Sources 166: 172-176.
41. Kienitz, B. L., Baskaran, H., and Zawodzinski, T. A. 2009. Modeling the steady-state effects of cationic contamination on polymer electrolyte membranes. Electrochimica Acta 54: 1671-1679.
42. La Conti, A. B., Hamdan, M., and Mcdonald, R. C. 2003. Mechanisms of membrane degradation. In:Handbook of Fuel Cells-Fundamentals, Technology and Application, eds. Vielstich, V., Lamm, A. and Gasteiger, H. A., pp. 647-662. New York, NY: John Wiley & Sons.
43. Li, H., Zhang, J. L., Fatih, K. et al. 2008. Polymer electrolyte membrane fuel cell contamination: Testing and diagnosis of toluene-induced cathode degradation. Journal of Power Sources 185: 272-279.
44. Li, H., Zhang, J. L., Shi, Z. et al. 2009. PEM fuel cell contamination: Effects of operating conditions on toluene-induced cathode degradation. Journal of the Electrochemical Society 156: B252-B257.
45. Li, Q., He, R., Jensen, J. O., and Bjerrum, N. J. 2004. PBI-based polymer membranes for high temperature fuel cells-Preparation, characterization and fuel cell demonstration. Fuel Cells 4: 147-159.
46. Li, Q. F., He, R. H., Gao, J. A., Jensen, J. O., and Bjerrum, N. J. 2003. The CO poisoning effect in PEMFCs operational at temperatures up to 200 degrees C. Journal of the Electrochemical Society 150:A1599-A1605.
47. Loucka, T. 1971. Adsorption and oxidation of sulphur and of sulphur dioxide at platinum electrode. Journal of Electroanalytical Chemistry 31: 319-332.
48. Manasilp, A. and Gulari, E. 2002. Selective CO oxidation over Pt/alumina catalysts for fuel cell applications. Applied Catalysis B: Environmental 37: 17-25.
49. Matsuoka, K., Sakamoto, S., Nakato, K., Hamada, A., and Itoh, Y. 2008. Degradation of polymer electrolyte fuel cells under the existence of anion species. Journal of Power Sources 179: 560-565.
50. Mecerreyes, D., Grande, H., Miguel, O. et al. 2004. Porous polybenzimidazole membranes doped with phosphoric acid: Highly proton-conducting solid electrolytes. Chemistry of Materials 16:604-607.
51. Mikkola, M. S., Rockward, T., Uribe, F. A., and Pivovar, B. S. 2007. The effect of NaCl in the cathode air stream on PEMFC performance. Fuel Cells 7: 153-158.
52. Mohtadi, R., Lee, W. K., and Van Zee, J. W. 2004. Assessing durability of cathodes exposed to common air impurities. Journal of Power Sources 138: 216-225.
53. Moore, J. M., Adcock, P. L., Lakeman, J. B., and Mepsted, G. O. 2000. The effects of battlefield contaminants on PEMFC performance. Journal of Power Sources 85: 254-260.
54. Nagahara, Y., Sugawara, S., and Shinohara, K. 2008. The impact of air contaminants on PEMFC performance and durability. Journal of Power Sources 182: 422-428.
55. Narusawa, K., Hayashida, M., Kamiya, Y. et al. 2003. Deterioration in fuel cell performance resulting from hydrogen fuel containing impurities: Poisoning effects by CO, CH4, HCHO and HCOOH. JSAE Review 24: 41-46.
56. O’leary, K., Budinski, M., and Lakshmanan, B. 2009. Methodologies for evaluating automative system contaminants. In Canada-USA PEM Network Research Workshop, Vancouver, Canada.
57. Okada, T. 1999a. Theory for water management in membranes for polymer electrolyte fuel cells-Part 1. The effect of impurity ions at the anode side on the membrane performances. Journal of Electroanalytical Chemistry 465: 1-17.
58. Okada, T. 1999b. Theory for water management in membranes for polymer electrolyte fuel cells-Part 2. The effect of impurity ions at the cathode side on the membrane performances. Journal of Electroanalytical Chemistry 465: 18-29.
59. Okada, T., Satou, H., Okuno, M., and Yuasa, M. 2002. Ion and water transport characteristics of perfluorosulfonated ionomer membranes with H+ and alkali metal cations. Journal of Physical Chemistry B 106: 1267-1273.
60. Palm, C., Cremer, P., Peters, R., and Stolten, D. 2002. Small-scale testing of a precious metal catalyst in the autothermal reforming of various hydrocarbon feeds. Journal of Power Sources 106: 231-237.
61. Paulus, U. A., Schmidt, T. J., Gasteiger, H. A., and Behm, R. J. 2001. Oxygen reduction on a high-surface area Pt/Vulcan carbon catalyst: A thin-film rotating ring-disk electrode study. Journal of Electroanalytical Chemistry 495: 134-145.
62. Pomfret, M. B., Pietron, J. J., and Owrutsky, J. C. 2010. Measurement of benzenethiol adsorption to nanostructured Pt, Pd, and PtPd films using Raman spectroelectrochemistry. Langmuir 26: 6809-6817.
63. Pozio, A., Silva, R. F., De Francesco, M., and Giorgi, L. 2003. Nafion degradation in PEFCs from end plate iron contamination. Electrochimica Acta 48: 1543-1549.
64. 3Co electrocatalysts using in situ x-ray absorption spectroscopy. Journal of Physical Chemistry C 114: 11886-11897.
65. Reiser, C. A. and Balliet, R. J. 2003. Fuel cell performance recovery by cyclic oxidant starvation. US Patent 2003224228.
66. Reshetenko, T., Bethune, K., and Rocheleau, R. 2010. Study of spatial PEMFC performance under CO poisoning using segmented cell approach. In 217 Electrochemical Society Meeting, Vancouver, Canada, pp. B7-B621.
67. Savadogo, O. 2004. Emerging membranes for electrochemical systems-Part II. High temperature composite membranes for polymer electrolyte fuel cell (PEFC) applications. Journal of Power Sources 127: 135-161.
68. Schmidt, T. J. and Baurmeister, J. 2006. Durability and reliability in high-temperature reformed hydrogen PEFCs. ECS Transactions 3: 861-869.
69. Schmittinger, W. and Vahidi, A. 2008. A review of the main parameters influencing long-term performance and durability of PEM fuel cells. Journal of Power Sources 180: 1-14.
70. Schulze, M., Knori, T., Schneider, A., and Gulzow, E. 2004. Degradation of sealings for PEFC test cells during fuel cell operation. Journal of Power Sources 127: 222-229.
71. Serincan, M. F., Pasaogullari, U., and Molter, T. 2010. Modeling the cation transport in an operating polymer electrolyte fuel cell (PEFC). International Journal of Hydrogen Energy 35: 5539-5551.
72. Shah, A. A. and Walsh, F. C. 2008. A model for hydrogen sulfide poisoning in proton exchange membrane fuel cells. Journal of Power Sources 185: 287-301.
73. Shao, Z. G., Joghee, P., and Hsing, I. M. 2004. Preparation and characterization of hybrid Nafion-silica membrane doped with phosphotungstic acid for high temperature operation of proton exchange membrane fuel cells. Journal of Membrane Science 229: 43-51.
74. 2S and CO mixtures on PEMFC performance. International Journal of Hydrogen Energy 32: 4412-4417.
75. Shi, Z., Song, D., Zhang, J. et al. 2007b. Transient analysis of hydrogen sulfide contamination on the performance of a PEM fuel cell. Journal of the Electrochemical Society 154: B609-B615.
76. Shi, Z., Song, D. T., Li, H. et al. 2009. A general model for air-side proton exchange membrane fuel cell contamination. Journal of Power Sources 186: 435-445.
77. Soto, H. J., Lee, W. K., Van Zee, J. W., and Murthy, M. 2003. Effect of transient ammonia concentrations on PEMFC performance. Electrochemical and Solid State Letters 6: A133-A135.
78. 2 dilution, and high fuel utilization. Journal of the Electrochemical Society 148: A11-A23.
79. St-Pierre, J. 2009. PEMFC contamination model: Competitive adsorption followed by an electrochemical reaction. Journal of the Electrochemical Society 156: B291-B300.
80. Stamenkovic, V. R., Mun, B. S., Arenz, M. et al. 2007. Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces. Nat. Mater. FIELD Full Journal Title:Nature Materials 6: 241-247.
81. Steinbach, A. J., Hamilton, C. V., Jr., and Debe, M. K. 2007. Impact of micromolar concentrations of externally-provided chloride and sulfide contaminants on PEMFC reversible stability. ECS Transactions 11: 889-902.
82. Sulek, M. S., Mueller, S. A., and Paik, C. H. 2008. Impact of Pt and Pt-alloy catalysts on membrane life in PEMFCs. Electrochemical and Solid State Letters 11: B79-B82.
83. Suntivich, J., Gasteiger, H. A., Yabuuchi, N., and Yang, S.-H. 2010. Electrocatalytic measurement methodology of oxide catalysts using a thin-film rotating disk electrode. Journal of the Electrochemical Society 157: B1263-B1268.
84. Suresh, B., Yoneyama, M., and Schlag, S. 2007. Hydrogen. In Chemical Economics Handbook. Menlo Park:SRI Consulting.
85. Swider, K. E. and Rolison, D. R. 1996. The chemical state of sulfur in carbon-supported fuel cell electrodes. Journal of the Electrochemical Society 143: 813-819.
86. Tewari, A., Sambhy, V., Macdonald, M. U., and Sen, A. 2006. Quantification of carbon dioxide poisoning in air breathing alkaline fuel cells. Journal of Power Sources 153: 1-10.
87. Trogadas, P., Parrondo, J., and Ramani, V. 2008. Degradation mitigation in polymer electrolyte membranes using cerium oxide as a regenerative free-radical scavenger. Electrochemical and Solid State Letters 11: B113-B116.
88. Uribe, F. A., Gottesfeld, S., and Zawodzinski Jr., T. A. 2002. Effect of ammonia as potential fuel impurity on proton exchange membrane fuel cell performance. Journal of the Electrochemical Society 149:A293-A296.
89. Uribe, F. A. and Rockward, T. Q. T. 2006. Cleaning (de-poisoning) PEMFC electrodes from strongly adsorbed species on the catalyst surface. US Patent 2006249399.
90. Varcoe, J. R. and Slade, R. C. T. 2005. Prospects for alkaline anion-exchange membranes in low temperature fuel cells. Fuel Cells 5: 187-200.
91. 3-2 on oxygen reduction in anion exchange membrane fuel cells. Electrochimica Acta 55: 1638-1644.
92. Wilson, M. S., Valerio, J. A., and Gottesfeld, S. 1995. Low platinum loading electrodes for polymer electrolyte fuel-cells fabricated using thermoplastic ionomers. Electrochimica Acta 40: 355-363.
93. 4 solution. Electrochimica Acta 52: 7444-7452.
94. Yang, C., Costamagna, P., Srinivasan, S., Benziger, J., and Bocarsly, A. B. 2001. Approaches and technical challenges to high temperature operation of proton exchange membrane fuel cells. Journal of Power Sources 103: 1-9.
95. Yang, D. J., Ma, J. X., Xu, L., Wu, M. Z., and Wang, H. J. 2006. The effect of nitrogen oxides in air on the performance of proton exchange membrane fuel cell. Electrochimica Acta 51: 4039-4044.
96. Zhai, Y., Bender, G., Dorn, S., and Rocheleau, R. 2010. The multiprocess degradation of PEMFC performance due to sulfur dioxide contamination and its recovery. Journal of the Electrochemical Society 157: B20-B26.
97. Zhang, J., Wang, H., Wilkinson, D. P. et al. 2005. Model for the contamination of fuel cell anode catalyst in the presence of fuel stream impurities. Journal of Power Sources 147: 58-71.
98. Zhang, X., Pasaogullari, U., and Molter, T. 2009. Influence of ammonia on membrane-electrode assemblies in polymer electrolyte fuel cells. International Journal of Hydrogen Energy 34: 9188-9194.
99. Zhou, J. F., Unlu, M., Vega, J. A., and Kohl, P. A. 2009. Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cells. Journal of Power Sources 190: 285-292.