Thermal computations for electronics: Conductive, radiative, and convective air cooling

Thermal Computations for Electronics: Conductive, Radiative, and Convective Air Cooling

Volumn , Issue , 2010, Pages 1-401

  Ellison, Gordon N ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; COMPUTATION THEORY; CURRICULA; ELECTRONIC COOLING; HEAT CONDUCTION; HEAT RESISTANCE; HEAT SINKS; IMAGE ENHANCEMENT; OSCILLATORS (ELECTRONIC); VARIATIONAL TECHNIQUES;

COMPUTATIONAL APPLICATIONS; CONDUCTIVE HEAT TRANSFER; CONVECTIVE HEAT TRANSFER; FINITE ELEMENT THEORIES; MATHEMATICAL CALCULATIONS; MATHEMATICAL DERIVATION; MATHEMATICAL DESCRIPTIONS; PROFESSIONAL RESOURCES;

HEAT CONVECTION;

EID: 85054659366     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b12772     Document Type: Book

References (118)

1. Adam, J. 1998. Pressure drop coefficients for thin perforated plates. Electronics Cooling, 4:40-41.
2. Agonafer, D. and Moffat, R.J. 1989. Numerical modeling of forced convection heat transfer for modules mounted on circuit boards. Numerical Simulation of Convection in Electronic Equipment Cooling, ASME HTD, 121:1-5.
3. AMCA, Air Movement and Control Association. http://www.amca.org. Accessed on Aug. 22, 2010.
4. American Society of Heating, Refrigerating, and Air Conditioning Engineers. Standard 51-75.
5. Anderson, A.M. and Moffat, R.J. 1992. The adiabatic heat transfer coefficient for different flow conditions. J. Electron. Packag., 12:14-21.
6. Anderson, A. M. and Moffat, R.J. 1990. A heat transfer correlation for arbitrary geometries in electronic equipment, in Proc. ASME Winter Annual Meeting, Dallas, TX.
7. Andrews, J.A. 1988. Package thermal resistance model: dependency on equipment design. IEEE Trans. CHMT, 11:528-537.
8. th characterization of chip packages-justification, limitations, and future. IEEE Trans. CHMT, 12:724-731.
9. Bar-Cohen, A. and Rohsenow, W.M. 1984. Thermally optimum spacing of vertical natural convection cooled, parallel plates. ASME J. of Heat Transfer, 106:116-123.
10. Barzelay, M.E., Kin Nee Tong, and Holloway, G. May 1955. National Advisory Committee for Aeronautics, Tech. Note 3295.
11. Beck, J.V., Cole, K.D., Haji-Sheikh, A., and Litkouhi, B. 2010. Heat conduction using Green’s functions. 2nd ed. CRC Press, Taylor and Francis Group. Boca Raton.
12. Beck, J.V., Cole, K.D., Haji-Sheikh, A., and Litkouhi, B. 1992. Heat conduction using Green’s functions. Hemisphere Publishing Corp.
13. Boelter, L.M.K., Young, G., and Iversen, H.W. July 1948. NACA TN 1451 (now NASA), Washington, D.C.
14. Bilitsky, A. 1986. The Effect of Geometry on Heat Transfer by Free Convection from a Fin Array. Master’s thesis. Dept. of Mech. Eng., Ben-Gurion University of the Negev, Beer Sheva, Israel.
15. Blazej, D. 2003. Thermal Interface Materials. Electronics Cooling. 9(4): 14-20.
16. Brebbia, C.A. and Dominguez, J. 1989. Boundary elements, an introductory course. Computational Mechanics Pubs, Boston. Co-published with McGraw-Hill Book Co., New York.
17. Burnett, D.S. 1987. Finite element analysis. Addison-Wesley Publishing Company.
18. Carslaw, H.S. and Jaeger, J.C. 1986. Conduction of heat in solids. Clarendon Press, Oxford.
19. Childs, G.E., Ericks, L.J., and Powell, R.L. 1973. Thermal conductivity of solids at room temperature and below. U.S. Dept. of Commerce, p. 507, B.Z.S.-2.
20. Church, S.W., and Chu, H.S. 1975. Correlating equations for laminar and turbulent free convection from a vertical plate. Int. J. Heat and Mass Transfer, 18:1323.
21. Copeland, D. 1992. Effects of channel height and planar spacing on air cooling of electronic components. J. Elect. Packag., 114: 420-424.
22. David, R.F. 1977. Computerized thermal analysis of hybrid circuits. Trans. Elect. Comp. Conf., Arlington, VA.
23. Dean, D.J. 1985. Thermal design of electronic circuit boards and packages. Electrochemical Pubs. Limited, 8 Barns St, Ayr, Scotland.
24. Dittus, F.W. and Boelter, L.M.K. 1930. Univ. Calif. Berkeley Publ. Eng., 2:433.
25. Dunkle, R.V. 1954. Thermal radiation tables and applications. Trans. ASME, 65: 549-552.
26. Ellison, G.N. 2003. Maximum thermal spreading resistance for rectangular sources and plates with nonunity aspect ratios. IEEE Trans. CPT, 26: 439-454.
27. Ellison, G.N. 1996. Thermal analysis of circuit boards and microelectronic components using an analytical solution to the heat conduction equation, an invited lecture presented at the 12th Annual Semiconductor Thermal Measurement and Management Symposium, Austin, Texas, March 5-7.
28. Ellison, G.N., Hershberg, E.L., and Patelzick, D.L. 1994. The crycooler implications of flexible, multi-channel I/O cables for low temperature superconducting microelectronics. Advances in Cryogenic Engineering, 39: 1167-1176, Spring Publishing Co.
29. Ellison, G.N. 1993. Methodologies for thermal analysis of electronic components and systems, in Advances in thermal modeling of electronic components and systems, Eds. A. Bar-Cohen and A.D. Kraus, vol. 3, ASME Press, New York and IEEE Press, New York.
30. Ellison, G.N. 1992. Extensions of a closed form method for subtrate thermal analyzers to include thermal resistances from source to-substrate and source-to-ambient. IEEE Trans. Comp., Hybrids, Mfg. Tech., 15: 658-666.
31. Ellison, G.N. 1990. TAMS: A thermal analyzer for multilayer structures, Electrosoft, 1: 85-97.
32. Ellison, G.N. and Patelzick, D.L. 1986. The thermal design of a forced air cooled power supply. Proced. 6th Intl. Elect. Packag. Conf., pp. 829-838.
33. Ellison, G.N. 1984a. Thermal computations for electronic equipment. Van Nostrand Reinhold. Reprint edition by Robert E. Kreiger Pub. Co., Malabar, FL, 1989.
34. Ellison, G.N. 1984b. A review of a thermal analysis computer program for micro-electronic devices, Thermal Mgt. Concepts in Microelec. Packaging, ISHM Tech. Monograph Series 6984-003.
35. Ellison, G.N. 1979. Generalized computations of the gray body shape factor for thermal radiation from a rectangular U-channel. IEEE Trans. Comp., Hybrids, Mfg. Tech., CHMT-2: 517-522.
36. Ellison, G.N. 1976. The thermal design of an LSI single chip package. IEEE Trans. Parts, Hybrids, Packag., PHP-12:371-378.
37. Ellison, G. N. 1973. The effect of some composite structures on the thermal resistance of substrates and integrated circuit chips, IEEE Trans. Electron Dev., ED-20:233-238.
38. Estes, R. 1987. Thermal design considerations for COB applications. Paper presented at the 7th Ann. Intl. Elec. Packag. Conf.
39. Faghri, M. 1996. Entrance design correlations for circuit boards in forced-air cooling, Air cooling technology for electronic equipment, Sung Jin Kim and Sang Woo Lee, Eds., CRC Press, Boca Raton, FL, pp. 47-80.
40. Farrell, O. J. and Bertram, R. 1963. Solved problems-gamma and beta functions, Legendre polynomials, Bessel functions. The MacMillan Company, New York, NY.
41. Fermi, E. 1937. Thermodynamics. Dover Publications, Inc. New York, NY.
42. Fried, E. and Idelchick, I.E. 1988. Flow Resistance, A Design Guide for Engineers. Hemisphere Publishing Corp., Washington, D.C.
43. Graebner, J.E. and Azar, K. 1995. Thermal conductivity of printed wiring boards. Electronics Cooling, 1:27.
44. Hay, D. 1964. Cooling card mounted solid-state component circuits. McLean Engineering Division of Zero Corporation, Trenton, NJ 08691.
45. Hein, V.L. and Lenzi, V.K. 1969. Thermal analysis of substrates and integrated circuits. Paper presented at the 1969 Electronic Components Conf.
46. Holman, J.P. 1990. Heat Transfer, 7th Ed. McGraw-Hill Book Co, New York, NY.
47. Holman, J.P. 1974. Thermodynamics. McGraw-Hill Publishing Co., New York, NY.
48. Howell, J.R. 1982. A catalog of radiation configuration factors. McGraw-Hill Book Co., New York, NY.
49. Hultberg, J.A. and O’Brien, P.F. 1971. TAS (Thermal Analyzer System). Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, Tech. Rep. 32-1416.
50. Jonsson, H. and Moshfegh, B. 2001. Modeling of the thermal and hydraulic performance of plate fin, strip fin, and pin fin heat sinks-influence of flow bypass, IEEE Trans. CPT, CPT-24:142-149.
51. Joy, R.C. and Schlig, E.S. Thermal properties of vey fast transistors. IEEE Trans. Electron Devices, vol. ED-17, no. 8, pp. 586-594, Aug. 1970.
52. Kang, S.S. 1994. The thermal wake function for rectangular electronic modules. J. Electron. Pkg. 116: 55-59.
53. Kays, W.M. and Crawford, M.E. 1980. Convective heat and mass transfer, 2nd. Ed., McGraw-Hill Book Co., NewYork, NY.
54. Kays, W.M. and London, A.L. 1964. Compact heat exchangers, McGraw-Hill Book Co., New York, NY.
55. Kays, W.M. 1955. Numerical solutions for laminar-flow heat transfer in circular tubes, Trans. ASME 58:1265-1274.
56. Kennedy, D.P. 1960. Spreading resistance in cylindrical semicoductor devices. J. Applied Physics, 31:1490-1497.
57. Khan, W.A., Culham, J.R., and Yovanovich, M.M. 2005. Modeling of cylindrical pin-fin heat sinks for electronic packaging. Paper presented at the 21st IEEE Semi-Therm Symposium.
58. Kraus, A.D. and Bar-Cohen, A. 1995. Design and analysis of heat sinks, John Wiley & Sons, Inc., New York, NY.
59. Kraus, A.D. and Bar-Cohen, A. 1983. Thermal analysis and control of electronic equipment, McGraw-Hill, NewYork, NY.
60. Kreith, F. and Bohn, M.S. 2001. Principles of heat transfer, 6th Ed., Brooks/Cole, New York, NY.
61. Langhaar, H.L. 1942. Steady flow in the transition length of a straight tube, J. Appl. Mech., Trans. ASME 64:55.
62. Lasance, C. 2006. Thermal conductivity of III-V semiconductors. Electronics Cooling 12:4.
63. Lasance, C., Rosten, H.I., and Parry, J.D. 1997. The world of thermal characterization according to DELPHI, part I: background to DELPHI. IEEE Trans. Comp., Hybrids, Mfg. Tech., CHMT-20: 384-391.
64. Lasance, C., Rosten, H.I., and Parry, J.D. 1997. Experimental and numerical methods, part I: background to DELPHI. IEEE Trans. Comp., Hybrids, Mfg. Tech., CHMT-20: 392-398.
65. Lasance, C. 1998. The thermal conductivity of silicon. Electronics Cooling 4:12.
66. Lea, S.M. 2004. Mathematics for physicists, Brooks/Cole-Thomson Learning, Belmont, CA.
67. Lee, S., Song, V.A.S., and Moran, K.P.1995. Constriction/spreading resistance model for electronics packaging. Proc. 4th ASME/JSME Thermal Eng. Joint Conf. 4:199-206.
68. Lee, S. 1995. Optimum design and selection of heat sinks. Proceedings of the 11th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, San Jose, CA, pp. 48-54.
69. Linton, R.A. and Agonafer, D. 1989. Thermal model of a PC, numerical simulation of convection in electronic equipment cooling. ASME Pub HTD121: 69-72.
70. Mahajan, R. 2004. Thermal interface materials. Electronics Cooling 10:10-16.
71. Marotta, E., Mazzuca, S., and Norley, J. 2002. Thermal joint conductance. Electronics cooling 8:16-22.
72. McAdams, W.H. 1954. Heat transmission, 3rd Ed., McGraw-Hill Book Company, New York.
73. Mikic, B.B. 1966. Thermal contact resistance. Sc.D. Thesis, Dept. of Mech. Eng., MIT, Cambridge, MA.
74. Moffat, R.J. and Ortega, A. 1988. Direct air cooling of electronic components. In Advances in thermal modeling of electronic components and systems, Ed. A. Bar-Cohen and A.D. Kraus, vol. 1, chap. 3, p. 240, Hemisphere Publishing Co., New York, NY.
75. Morse, P.M. and Feshbach, H.F. 1953. Methods of theoretical physics, Part I, McGraw-Hill Book Company, New York, NY.
76. Muzychka, Y.S., Yovanovich, M.M., and Culham, J.R. 2001. Application of thermal spreading resistance in compound systems, in Proc. 39th AIAA Aerosp. Sci. Meeting Exhibit, Reno, NV, Jan. 8-11.
77. Muzychka, Y.S. and Yovanovich, M.M. 1998. Modeling friction factors in non-circular ducts for developing laminar flow. Presented at the 2nd AIAA Theoretical Fluid Mechanics Meeting, Albuqerque, NM.
78. Muzychka, Y.S. and Yovanovich, M.M. 1998. Modeling Nusselt numbers for thermally developing laminar flow in non-circular ducts. Paper presented at the AIAA/ASME Joint Thermophysics Heat Transfer Conf., paper no. 98-2586.
79. Palisoc, A.L. and Lee, C.C. 1988. Thermal design of integrated circuit devices. Paper presented at the 4th Ann. IEEE semiconductor thermal measurement and management symposium.
80. Patankar, S. V. 1980. Numerical heat transfer and fluid flow. Hemisphere Publishing Corp., New York, NY.
81. PDE Solutions, Inc., Spokane Valley, WA. http://www.pdesolutions.com.
82. Pinto, E.J. and Mikic, B.B. 1986. Temperature prediction on substrates and integrated circuit chips. Paper presented at the 1986 AIAA/ASME Thermophysics and Heat Trans Conf.
83. Present, R.D. 1958. Kinetic theory of gases, McGraw-Hill Book Co. New York, NY.
84. Raithby, G.D. and Hollands, K.G.T. 1985. Natural convection. Handbook of Heat Transfer Fundamentals, Eds. Rohsenow, W.M., Hartnett, J.P. and Granic, E.M., McGraw-Hill, chap. 6, pp. 34-36.
85. Ramakrishna, K. 1982. Thermal analysis of composite multilayer structures with multiple heat sources. Paper presented at the 2nd Intl. Elect. Packag. Conf.
86. Rantala, J. 2004. Surface flatness, Electronics cooling 10:12.
87. Rea, S.N. and West, S.E. 1976. Thermal radiation from finned heat sinks. IEEE Trans. on Parts, Hybrids, and Packaging PHP-12:115-117.
88. Reddy, J.N. 1984. An introduction to the finite element method. McGraw-Hill, New York, NY.
89. Rhee, J. and Bhatt, A.D. 2007. Spatial and temporal resolution of conjugate conduction-convection thermal resistance. IEEE Trans. Comp. and Pkg. Tech. 30:673-682.
90. Rosten, H., Lasance, C. and Parry, J. 1997. The world of thermal characterisation according to DELPHI-Part I: Background to DELPHI. IEEE Trans. CHMT 20:384-391.
91. Rosenberg, H.M. 1963. Low temperature solid state physics. Oxford University Press, London.
92. Saums, D.L. 2007. Developments with metallic thermal interface materials. Electronics cooling 13:26-30.
93. Scarborough, J.B. 1958. Numerical mathematical analysis, 4th Ed. Johns Hopkins Press, Baltimore.
94. Schlichting, H. 1968. Boundary layer theory. 6th Ed. McGraw-Hill Publishing Co., New York, NY.
95. Schnipke, R J. 1989. A fluid flow and heat transfer analysis for evaluating the effectiveness of an IC package heat sink. Paper presented at the 5th Ann. IEEE semiconductor thermal measurement and management symposium.
96. Segerlind, L.J. 1976. Applied finite element analysis. John Wiley & Sons, Inc, New York, NY.
97. Simons, R.E. and Schmidt, R.R. 1997. A simple method to estimate heat sink air flow bypass. Electronics cooling 2: 36-37.
98. Sparrow, E.M., Niethammer, J.E., and Chaboki, A. 1982. Heat transfer and pressure drop charcateristics of arrays of rectangular modules encountered in electronic equipment. Int. J. Heat Mass Transfer, 25(7): 961-973.
99. Sparrow, E.M., Niethammer, J.E., and Chaboki, A. 1982. Heat transfer and pressure drop characteristics of arrays of rectangular modules encountered in electronic equipment. Int. J. Heat Mass Transfer 25: 961-973.
100. Spoor, J. 1974. Heat sink application handbook, AHAM, Inc., Azusa, CA.
101. Steinberg, D.S. 1991. Cooling techniques for electronic equipment. Wiley-Interscience Pubs, New York, NY.
102. Teertstra, P., Culham, J.R., and Yovanovich, M.M. 1996. Comprehensive review of natural and mixed convection heat transfer models for circuit board arrays. Proceedings of the International Electronics Packaging Symposium pp. 156-171.
103. Teertstra, P., Yovanovich, M.M., Culham, J.R. 1997. Pressure loss modeling for surface mounted cuboid-shaped packages in channel flow. IEEE Transactions on Components, Packaging, and Manufacturing Technology-Part A, CPMT-20:463-469.
104. Touloukian, Y.S., Powell, R.W., Ho, C.Y., and Klemens, P.G., editors. Thermophysical Properties of Matter, TPRC Data Series. 1970. Undoped germanium 1:131; undoped silicon,1:339.
105. Van de Pol, D.W. and Tierney, J.K. 1974. Free convection heat transfer from verical fin-arrays. IEEE Trans. on Parts, Hybrids, and Packaging PHP-10:542-543.
106. Watson, G.N. 1922. A treatise on the theory of Bessel functions. Cambridge University Press, London.
107. Wills, M. 1983. Thermal analysis of air-cooled PCBs. Electronic production, May, 11-18, pp. 11-18.
108. Wilson, J. 2006. Thermal conductivity of III-V semiconductors. Electronics Cooling 12:4.
109. Wirtz, R. 1996. Forced air cooling of low profile package arrays. Air cooling technology for electronic equipment, Eds Sung Jin Kim and Sang Woo Lee. CRC Press, pp. 81-102.
110. Wirtz, R.A. and Colban, D.M. 1995. Comparison of the cooling performance of staggered and in-line arrays of electronic packages. Proc. ASME/JSME thermophys. conf., Maui, Hawaii 4:215-221.
111. Wirtz, R.A., Chen, W., and Zhou, R. 1994. Effect of flow bypass on the performance of longitudinal fin heat sinks. J. Electronic Pkg. 116:206-211.
112. th IEPS Conf., Baltimore, MD, pp. 318-326.
113. Wirtz, R.A. and Mathur, A. 1994. Convective heat transfer distribution on the surface of an electrronic package. J. Electronic Pkg. 116:49-54.
114. Yovanovich, M.M. 2005. Four decades of research on thermal contact, gap, and joint resistance in microelectronics. IEEE Trans. CPMT, 28:182-206.
115. Yovanovich, M.M. and Antonetti, V.W. 1998. Application of thermal contact resistance theory to electronic packages. Eds. A. Bar-Cohen and A.D. Kraus. In Advances in thermal modeling of electronic components and systems, Ed. A. Bar-Cohen and A.D. Kraus, vol. 1, ch. 2, Hemisphere Publishing Co., New York.
116. Yovanovich, M.M. and Teerstra, P. 1998. Laminar forced convection from isothermal rectangular plates from small to large Reynold’s numbers. American Institute of Aeronautics and Astronautics, paper AIAA-98-2675.
117. Yovanovich, M.M., Myzychka, Y.S., and Culham, J.R. 1998. Spreading resistance of isoflux rectangles on compound flux channels, in Proc. 36th AIAA Aerospace Sci. Meeting Exhibit, Reno, NV, Jan. 12-15, 1998.
118. Yovanovich, M.M., Culham, J.R., and Teertstra, P. 1997. Calculating interface resistance. Electronics cooling 3:24-29.