Carbon fibers: Formation, structure, and properties

Carbon Fibers: Formation, Structure, and Properties

Volumn , Issue , 2018, Pages 1-203

  Peebles, Leighton H ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

SURFACE REACTIONS;

CHEMICAL REAGENTS; COMMERCIAL MATERIALS; COMPRESSIVE PROPERTIES; FIBER-MATRIX INTERACTION; PITCH PRECURSORS; SURFACE CHARACTERIZATION; SURFACE GROUPS;

CARBON FIBERS;

EID: 85052561949     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781351070423     Document Type: Book

References (417)

1. Sittig, M., Ed., Carbon and Graphite Fibers: Manufacture and Applications, Noyes Data Corp., Park Ridge, NJ, 1980.
2. Delmonte, J., Technology of Carbon and Graphite Fiber Composites, Van Nostrand Reinhold, New York, 1981.
3. Donnet, J.-B. and Bansal, R. C., Carbon Fibers, Marcel Dekker, New York, 1984.
4. Fitzer, E., Ed., Carbon Fibres and Their Composites, Springer-Verlag, New York, 1985.
5. Watt, W. and Perov, B. V., Eds., Handbook of Composites, Vol. 1, Strong Fibers, Elsevier, New York, 1985.
6. Dresselhaus, M. S., Dresselhaus, G., Sugihara, K., Spain, I. L., and Goldberg, H. A., Graphite Fibers and Filaments, Springer-Verlag, New York, 1988.
7. Figueiredo, J. L., Bernardo, C. A., Baker, R. T. K., and Huttinger, K. J., Eds., Carbon Fibers, Filaments, and Composites, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1990.
8. Donnet, J.-B. and Bansal, R. C., Carbon Fibers, 2nd ed., Marcel Dekker, New York, 1990
9. Tang, M. M. and Bacon, R., Carbonization of cellulose fibers-I: Low temperature pyrolysis, Carbon, 2, 211, 1964.
10. Gill, R. M., in Carbon Fibers in Composite Materials, published for The Plastics Institute, London, ILIFFE Books, London, 1972.
11. Bacon, R., Carbon fibers from rayon precursors, in Chemistry and Physics of Carbon, Vol. 9, Walker, P. L., Jr. and Thrower, P. A., Eds., Marcel Dekker, New York, 1974, 1.
12. Riggs, D. M., Shuford, R. J. and Lewis, R. W., Graphite fibers and composites, in Handbook of Composites, Lubin, G., Ed., Van Nostrand Reinhold, New York, 1982, 196.
13. Konkin, A. A., Production of cellulose based carbon fibrous materials, in Handbook of Composites, Vol. 1, Strong Fibers, Watt, W. and Perov, B. V., Eds., Elsevier, New York, 1985, 275.
14. Edison, T. A., U.S. Patent 223,898, 1880.
15. Bacon, R., Cranch, G. E., Moyer, R. O., Jr. and Watts, W. H., U.S. Patent 3,305,315, 1967.
16. Fitzer, E., Carbon fibers — present state and future expectations, in Carbon Fibers, Filaments, and Composites, Figueiredo, J. L., Bernardo, C. A., Baker, R. T. K. and Hiittinger, J., Eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1990, 3.
17. Diefendorf, R. J. and Tokarsky, E., High-performance carbon fibers, Polym. Eng. Sci., 15, 150, 1975.
18. Towne, M. K., Recent efforts to make an ‘improved’ WCA graphite fabric, 7th JANNAF Rocket Nozzle Technology Subcommittee Meeting, November 1985
19. Goodhew, P. J., Clarke, A. J., and Bailey, J. E., A review of the fabrication and properties of carbon fibers, Mater. Sci. Eng., 17, 3, 1975.
20. Peebles, L. H., Jr., Acrylonitrile polymers, degradation, in Encyclopedia of Polymer Science and Technology, Suppl. Vol. 1, John Wiley & Sons, New York, 1976, 1.
21. Henrici-Olive, G. and Olive, S., The chemistry of carbon fiber formation from polyacrylonitrile, Adv. Polym. Sci., 51, 1, 1983.
22. Watt, W., Chemistry and physics of the conversion of polyacrylonitrile fibers into high-modulus carbon fibers, in Handbook of Composites, Vol. 1, Strong Fibers, Watt, W. and Perov, B. V., Eds., Elsevier, New York, 1985, 327.
23. Riggs, J. P., Carbon fibers, in Encyclopedia of Polymer Science and Engineering, Vol. 2, John Wiley & Sons, New York, 1985, 640
24. Thorne, D. J., Manufacture of carbon fiber from PAN, in Handbook of Composites, Vol. 1, Strong Fibers, Watt, W. and Perov, B. V., Eds., Elsevier, New York, 1985,475.
25. Fitzer, E., Frohs, W., and Heine, M., Optimization of stabilization and carbonization treatment of PAN fibers and structural characterization of the resulting carbon fibers, Carbon, 24, 387, 1986.
26. Fitzer, E., PAN-based carbon fibers-present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters, Carbon, 27, 621, 1989.
27. Damodaran, S., Desai, P., and Abhiraman, A. S., Chemical and physical aspects of the formation of carbon fibers from PAN-based precursors, J. Textile Instit. (U.K.), special edition on composites, 1991.
28. Gupta, A. K., Paliwal, D. K., and Bajaj, P., Acrylic precursors for carbon fibers, J. Macromol. Sci. Rev. Macromol. Chem. Phys., C31, 1, 1991.
29. Rajalingam, P. and Radhakrishnan, G., Polyacrylonitrile precursor for carbon fibers, J. Macromol. Sci. Rev. Macromol. Chem. Phys., C31, 301, 1991.
30. Bashir, Z., A critical review of the stabilization of polyacrylonitrile, Carbon, 29, 1081, 1991.
31. Grove, D., Daga, V., Desai, P., and Abhiraman, A. S., Evolution from polyacryloni- trile-based precursor fibers to carbon fibers, in Composite Applications: the Role of Matrix, Fiber and Interface, Vigo, T. and Kinzig, B., Eds., VCH Publishers, Inc., 1992, chap. 5.
32. Balasubramanian, M., Jain, M. K., Bhattacharya, S. K., and Abhiraman, A. S., Conversion of acrylonitrile-based precursors to carbon fibers: Part 3. Thermooxidative stabilization and continuous, low temperature carbonization, J. Mater. Sci., 22, 3864, 1987.
33. Mathur, R. B., Bahl, O. P., Matta, V. K., and Nagpal, K. C., Modification of PAN precursor-its influence on the reaction kinetics, Carbon, 26, 295, 1988.
34. Wolfowitz, S., Thesis, University of Maryland, Department of Chemistry (1967) as quoted in Peebles, ref. 2.
35. Burlant, W. J. and Parsons, J. L., Pyrolysis of polyacrylonitrile, J. Polym. Sci., 22, 249, 1956.
36. Usami, T., Itoh, T., Ohtani, H., and Tsuge, S., Structural study of polyacrylonitrile fibers during oxidative thermal degradation by pyrolysis-gas chromatography, solid- state 13C nuclear magnetic resonance and Fourier transform infrared spectroscopy, Macromolecules, 23, 2460, 1990.
37. Henrici-Olive, G. and Olive, S., Molecular interactions and macroscopic properties of polyacrylonitrile and model substances, Adv. Polym. Sci., 32, 123, 1980.
38. Ganster, J., Fink, H.-P., and Zenke, I., Chain conformation of polyacrylonitrile: a comparison of model scattering and radial distribution functions with experimental wide-angle X-ray scattering results, Polymer, 32, 1566, 1991.
39. Peebles, L. H., Jr., Peyser, P., Snow, A. W., and Peters, W. C., On the exotherm of polyacrylonitrile: pyrolysis of the homopolymer under inert conditions, Carbon, 28, 707, 1990.
40. Jain, M. K., Balasubramanian, M., Desai, P., and Abhiraman, A. S., Conversion of acrylonitrile-based precursors to carbon fibers. Part 2, Precursor morphology and thermooxidative stabilization, J. Mater. Sci., 22, 301, 1987.
41. Dunham, M. G. and Edie, D. D., Model of stabilization for PAN-based carbon fiber precursor bundles, Carbon, 30, 435, 1992.
42. Grove, D. A. III and Abhiraman, A. S., A mathematical model of solid state thermo-oxidative stabilization of acrylic fibers, Carbon, 30, 451, 1992.
43. Johnson, J. W., Potter, W., Rose, P. G., and Scott, G., Stabilization of polyacrylonitrile by oxidative transformation, Br. Polym. J., 4, 527, 1972.
44. Warner, S. B., Peebles, L. H., Jr., and Uhlmann, D. R., Oxidative stabilization of acrylic fibers. Part I. Oxygen uptake and general model, J. Mater. Sci., 14, 556, 1979.
45. Pejanovic, S. and Pavlovic, V., Processing of carbon fibers I. Oxidative stabilization, Extended Abstr. Int. Carbon Conf., “Carbone 90”, Paris, 16-20, July, 1990, 152.
46. Chen, S. S., Herms, J., Peebles, L. H., Jr., and Uhlmann, D. R., Oxidative stabilization of acrylic fibers. Part 5. The decoloration reaction, J. Mater. Sci., 16, 1490, 1981.
47. Manocha, L. M. and Bahl, O. P., Role of oxygen during thermal stabilization of PAN fibers, Fiber Sci. Technol., 13, 199, 1980.
48. Bahl, O. P., Mathur, R. B., and Kundra, K. D., Treatment of PAN fibers with S02 and development of carbon fibers therefrom, Fiber Sci. Technol., 13, 155, 1980.
49. Holsten, J. R. and Morrison, J. G., Process for Oxidizing and Carbonizing Acrylic Fibers, U. S. Patent 3,556,729, 1971.
50. Bhat, G. S., Cook, F. L., Abhiraman, A. S., and Peebles, L. H., Jr., New aspects in the stabilization of acrylic fibers for carbon fibers, Carbon, 28, 377, 1990.
51. Menikheim, V. C., Method for Producing Graphitizable Substrates from Acrylic Fibers, U. S. Patent 3,814,577, 1974.
52. Menikheim, V. C., Process for Treating Acrylic Fibers to Carbonizable and Graphitizable Substrates, U. S. Patent 3,817,700, 1974.
53. Mathur, R. B., Gupta, G., Bahl, O. P., and Dhami, T. L., Infrared spectral studies of preoxidized PAN fibers incorporated with cuprous chloride additive, Fiber Sci. Technol., 20, 227, 1984.
54. Ko, T.-H., Liau, S.-C., and Lin, M.-F., Preparation of graphite fibers from a modified PAN precursor, J. Mater. Sci., 27, 6071, 1992.
55. Hunter, W. L., Lability of the a-hydrogen in PAN, Polym. Lett., 5, 23, 1967.
56. Peebles, L. H., Jr. and Snow, A. W., Unpublished results, NRL.
57. Fiedler, A. K., Fitzer, E., and Rozploch, F., PAN pyrolysis studied by gas-and ESR- analysis, Extended Abstr., 11th Biennial Conf. on Carbon, 1973, 261.
58. Morita, K., Murata, Y., Ishitani, A., Murayama, K., Ono, T., and Nakajima, A., Characterization of commercially available PAN-based carbon fibers, Pure Appl. Chem., 58, 455, 1986.
59. Jain, M. K. and Abhiraman, A. S., Oxidative stabilization of oriented acrylic fibers — morphological rearrangements, J. Mater. Sci., 18, 179, 1983.
60. Warner, S. B., Peebles, L. H., Jr., and Uhlmann, D. R., Oxidative stabilization of acrylic fibers. Part 2. Stabilization dynamics, J. Mater. Sci., 14, 565, 1979.
61. Takaku, A. and Shimizu, J., Volume contraction and its significance in structural formation during the thermal stabilization of acrylic fibers, J. Appl. Polym. Sci., 29, 1319, 1984.
62. Deurbergue, A. and Oberlin, A., Stabilization and carbonation of PAN-based carbon fibers as related to mechanical properties, Carbon, 29, 621, 1991.
63. Jain, M. K. and Abhiraman, A. S., Conversion of acrylonitrile-based precursor fibers to carbon fibers. Part I. A review of the physical and morphological aspects, J. Mater. Sci., 22, 278, 1987.
64. Matsumoto, T., Mesophase pitch and its carbon fibers, Pure Appl. Chem., 57, 1553, 1985.
65. Serin, V., Fourmeaux, R., Kihn, Y., Sevely, J., and Guigon, M., Nitrogen distribution in high tensile strength carbon fibers, Carbon, 28, 573, 1990.
66. Watt, W., Carbon work at the Royal Aircraft Establishment, Carbon, 10, 121, 1972.
67. Singer, L. S., Carbon fibers, in Concise Encyclopedia of Composite Materials, Kelly, A., Ed., Pergamon Press, Oxford, 1989, 47.
68. Ozbek, S., Jenkins, G. M., and Isaac, D. H., Mechanical properties of hot stretched carbon fibers, Extended Abstr., 20th Biennial Conf. on Carbon, 1991, 308
69. Brooks, J. D. and Taylor, G. H., The formation of graphitizing carbon from the liquid phase, Carbon, 3, 185, 1965.
70. Brooks, J. D. and Taylor, G. H., The formation of some graphitizing carbon, Chemistry and Physics of Carbon, Vol. 4, Walker, P. L., Jr., Ed., Marcel Dekker, New York, 1968, 243.
71. Bacon, R., Carbon fibers from mesophase pitch, Phil. Trans. R. Soc. Lond., A294, 437, 1979.
72. Singer, L. S., High modulus carbon fibers from mesophase pitch, in Ultra-High Modulus Polymers, Ciferri, A. and Ward, I. M., Eds., Applied Science Publishers, Essex, UK, 1979, 251.
73. Riggs, D. M., Shuford, R. J., and Lewis, R. W., Graphite fibers and composites, in Handbook of Composites, Lubin, G., Ed., Van Nostrand Reinhold, New York, 1982, 196.
74. Riggs, J. P., Carbon fibers, in Encyclopedia of Polymer Science and Engineering, Vol. 2, John Wiley & Sons, New York, 1985, 640.
75. Rand, B., Carbon fibers from mesophase pitch, in Handbook of Composites, Vol. 1, Strong Fibers, Watt, W. and Perov, B. V., Eds., Elsevier, New York, 1985, 497.
76. Matsumoto, T., Mesophase pitch and its carbon fibers, Pure Appl. Chem., 57, 1553, 1985.
77. Singer, L. S., Carbon fibers, in Concise Encyclopedia of Composite Materials, Kelly, A., Ed., Pergamon Press, Oxford, 1989, 47.
78. Zimmer, J. E. and White, J. L., Disclination structures in the carbonaceous mesophase, Adv. in Liq. Crysts., Vol. 5, Academic Press, New York, 1982, 157.
79. Brooks, J. D. and Silberman, H., The chemical reduction of some cokes and chars, Fuel, 41, 67, 1962.
80. Didchenko, R., Barr, J. B., Chwastiak, S., Lewis, I. C., Lewis, R. T., and Singer, L. S., High modulus carbon fibers from mesophase pitches. Part I. Preparation and properties of pitches, Extended Abstr., 12th Biennial Conf. on Carbon, 1975, 329.
81. Diefendorf, R. J. and Riggs, D. M., Forming Optically Anisotropic Pitches, U.S. Patent 4,208,267, 1980.
82. Riggs, D. M., Carbon fiber from solvent extracted pitch, Preprints Div. Petrol. Chem. Am. Chem. Soc., 29, 400, 1984.
83. Hildebrand, J. H. and Scott, R. L., The Solubility of Nonelectrolytes, 3rd ed., Reinhold Publishing Corp., New York, 1950.
84. Lewis, I. C., Process for Producing Mesophase Pitch, U.S. Patent 4,032,430, 1977.
85. McHenry, E. R., Process for Producing Mesophase Pitch, U.S. Patent 4,026,788,1977.
86. Lewis, I. C., McHenry, E. R., and Singer, L. S., Process for Producing Mesophase Pitch, U.S. Patent 4,017,327, 1977.
87. Singer, L. S., The mesophase and high modulus carbon fibers from pitch, Carbon, 16, 408, 1978.
88. Shang, H.-Y., Liu, L., Zha, Q.-F., and Qian, S.-A., Study of hydrogenation of mesophase pitches using IR and NMR, Extended Abstr., 20th Biennial Conf. on Carbon, 1991, 142.
89. Lafdi, K., Bonnamy, S., and Oberlin, A., Mechanism of anisotropy occurrence in a pitch precursor of carbon fibers. Part I. Pitches A and B, Carbon, 29, 831, 1991.
90. Lafdi, K., Bonnamy, S., and Oberlin, A., Mechanism of anisotropy occurrence in a pitch precursor of carbon fibers. Part II. Pitch C, Carbon, 29, 849, 1991.
91. Lafdi, K., Bonnamy, S., and Oberlin, A., Mechanism of anisotropy occurrence in a pitch precursor of carbon fibers: Part III. Hot stage microscopy of pitch B and C, Carbon, 29, 857, 1991.
92. Vorpagel, E. R. and Lavin, J. G., Most stable configurations of polynuclear aromatic hydrocarbon molecules in pitches via molecular modelling, Carbon, 30, 1033, 1992.
93. Nazem, F. F., Rheology of carbonaceous mesophase pitch, Fuel, 59, 851, 1980.
94. Nazem, F. F., Flow of molten mesophase pitch, Carbon, 20, 345, 1982. 27.
95. Edie, D. D. and Dunham, M. G., Melt spinning pitch based carbon fibers, Carbon, 27, 647, 1989.
96. Lewis, I. C. and Lewis, R. T., Rheological characterization of pitches, Extended Abstr., 20th Biennial Conf. on Carbon, 1991, 166.
97. Williams, M. L., Landel, R. F., and Ferry, J. D., J. Am. Chem.Soc., 77,3701,1955.
98. Roche, E. J., Electron microscopy study of mesophase pitch-based graphite fibers, J. Mater. Sci., 25, 2149, 1990.
99. Roche, E. J., Lavin, J. G., and Parrish, R. G., The mosaic nature of the graphite sheet in pitch-based carbon fibers, Carbon, 26, 911, 1988.
100. Otani, S. and Oya, A., Progress of pitch-based carbon fiber in Japan, in Petroleum Derived Carbons, Bacha, J. D., Newman, J. W., and White, J. L., Eds., ACS Symp. Ser. No. 303, American Chemical Society, Washington, D.C., 1986, 322.
101. Hamada, T., Nishida, T., Sajiki, Y., Matsumoto, M., and Endo, M., Structures and physical properties of carbon fibers from coal tar mesophase pitch, J. Mater. Res., 2, 850, 1987.
102. White, J. L. and Buechler, M., Microstructure formation in mesophase carbon fibers and other graphitic materials, in Petroleum-Derived Carbons, Bacha, J. D., Newman, J. W., and White, J. L., Eds., ACS Symp. Ser. No. 303, American Chemical Society, Washington, D.C., 1986, 62.
103. Bourrat, X., Roche, E. J., and Lavin, J. G., Structure of mesophase pitch fibers, Carbon, 28, 435, 1990.
104. Bourrat, X., Roche, E. J., and Lavin, J. G., Lattice imaging of disclinations in carbon fibers, Carbon, 28, 236, 1990.
105. Mochida, I., Toshima, H., Korai, Y., and Matsumoto, T., Blending mesophase pitch to improve its properties as a precursor for carbon fiber. Part 1. Blending of PVC pitch into coal tar and petroleum-derived mesophase pitches, J. Mater. Sci., 23, 670, 1988.
106. Mochida, I., Toshima, H., Korai, Y., and Hino, T., Oxygen distribution in the mesophase pitch fiber after oxidative stabilization, J. Mater. Sci., 24, 389, 1989.
107. Mochida, I., Zeng, S. M., Korai, Y., and Toshima, H., The introduction of a skin- core structure in mesophase pitch fibers by oxidative stabilization, Carbon, 28, 193, 1990.
108. Lavin, J. G., Chemical reactions in the stabilization of mesophase pitch-based carbon fibers, Carbon, 30, 351, 1992.
109. Matsumoto, T. and Mochida, I., A structural study on oxidative stabilization of mesophase pitch fibers derived from coal tar, Carbon, 30, 1041, 1992
110. Hoffman, W. P., Hurley, W. C., Liu, P. M., and Owens, T. W., The surface topology of non-shear treated pitch and PAN carbon fibers as viewed by the STM, J. Mater. Res., 6, 1685, 1991.
111. Guigon, M., Oberlin, A., and Desarmot, G., Microtexture and structure of some high-modulus PAN-based carbon fibers, Fiber Sci. Technol., 20, 177, 1984.
112. Bennett, S. C. and Johnson, D. J., Strength-structure relationships in PAN-based carbon fibers, 5th Lond. Int. Carbon and Graphite Conf., Society of Chemical Industry, London, 1978, 377.
113. Bourrat, X., Roche, E. J., and Lavin, J. G., Structure of mesophase pitch fibers, Carbon, 28, 435, 1990.
114. Oberlin, A., Carbonization and graphitization, Carbon, 22, 521, 1984.
115. Craig, J. P., Knudsen, J. P., and Holland, V. F., Characterization of acrylic fiber structure, Textile Res. J., 32, 435, 1962.
116. Kwizera, P., Dresselhaus, M. S., Uhlmann, D. R., Perkins, J. S., and Desper, C. R., The microstructure of intercalated graphite fibers, Carbon, 20, 387, 1982.
117. Anderson, S. H. and Chung, D. D. L., Exfoliation of single crystal graphite and graphite fibers intercalated with halogens, Synth. Met., 8, 343, 1983.
118. Fitz Gerald, J. D., Pennock, G. M., and Taylor, G. H., Domain structure in MP (mesophase pitch)-based fibers, Carbon, 29, 139, 1991.
119. Lafdi, K., Bonnamy, S., and Oberlin, A., Anisotropic pitch-based carbon fibers — Carbonization and graphitization (radial-with-wedge II and radial 12 types), Carbon, 30, 533, 1992.
120. Johnson, D. J., Recent advances in studies of carbon fiber structure, Philos. Trans., R. Soc. Lond., A294, 443, 1980.
121. Guigon, M. and Oberlin, A., Heat-treatment of high tensile strength PAN-based carbon fibers: microtexture, structure and mechanical properties, Compos. Sci. Tech., 27, 1, 1986.
122. Johnson, D. J., private communication, 1994.
123. Hamada, T., Furuyama, M., Sajili, Y., Tomika, T., and Endo, M., Preferred orientation of pitch precursor fibers, J. Mater. Res., 5, 1271, 1990.
124. Perret, R. and Ruland, W., The microstructure of PAN-based carbon fibers, J. Appl. Crystallogr., 3, 525, 1970.
125. Diefendorf, R. J. and Tokarsky, E., High-performance carbon fibers, Polym. Eng. Sci., 15, 150, 1975.
126. Guigon, M., Oberlin, A., and Desarmot, G., Microtexture and structure of some high tensile strength, PAN-based carbon fibers, Fiber Sci. Technol., 20, 55, 1984.
127. Gibson, D. W., Heat treatment effects upon the properties of PAN-based carbon fibers, 18th Natl. SAMPE Symp., Vol. 18, 1973, 165.
128. Barnet, F. R. and Norr, M. K., A three-dimensional structural model for a high modulus PAN-based carbon fiber, Composites, 7, 93, 1976.
129. Knudsen, J. P., The influence of coagulation variables on the structure and physical properties of an acrylic fiber, Textile Res. J., 33, 13, 1963.
130. Guigon, M. and Oberlin, A., Preliminary studies of mesophase pitch-based carbon fibers: structure and microtexture, Composite Sci. Tech., 25, 231, 1986.
131. Lafdi, K., Bonnamy, S., and Oberlin, A., Mechanism of formation of the texture and microtexture in as-spun then oxidized anisotropic pitch-based carbon fibers. Part I. Radial with wedge type II, Carbon, 30, 551, 1992.
132. Lafdi, K., Bonnamy, S., and Oberlin, A., Mechanism of formation of the texture and microtexture in as-spun then oxidized anisotropic pitch-based carbon fibers. Part II. Radial with wedge type 12, Carbon, 30, 569, 1992.
133. Lafdi, K., Bonnamy, S., and Oberlin, A., Textures and structures in heterogeneous pitch-based carbon fibers (as-spun, oxidized, carbonized, and graphitized), Carbon, 30, 29, 1993.
134. Roche, E. J., Electron microscopy study of mesophase pitch-based graphite fibers, J. Mater. Sci., 25, 2149, 1990.
135. Johnson, D. J., Optical anisotropy of carbon fibers, Nature, 279, 142, 1979.
136. Chen, K. J. and Diefendorf, R. J., Residual stress in high modulus carbon fibers, in Progress in Science and Engineering of Composites, Hayashi, T., Kawata, K., and Umekawa, S., Eds., ICCM-IV, Tokyo, 1982, 97.
137. Chen, K.-J. and Diefendorf, R. J., The modulus distribution in carbon fibers, Extended Abstr., 17th Biennial Conf. on Carbon, 1983, 490.
138. Chen, K.-J. and Diefendorf, R. J., The strength distribution in etched carbon fibers, Extended Abstr., 17th Biennial Conf. on Carbon, 1985, 437.
139. Standard Test Method for Tensile Strength and Young’s Modulus for High-Modulus Single-Filament Materials, ASTM Standard D 3379-75 (Reapproved 1989).
140. Tensile Properties of Continuous Filament Carbon and Graphite Yams, Strands, Rovings, and Tows, ASTM D 4018-81.
141. Lovell, D. R., Carbon and High Performance Fibers Directory, 5th ed., Chapman & Hall, 1991.
142. Beetz, C. P., Jr., The analysis of carbon fiber strength distributions exhibiting multiple modes of failure, Fiber Sci. Technol., 16, 45, 1982.
143. Own, S. H., Subramanian, R. V., and Saunders, S. C., A bimodal log-normal model of the distribution of strength of carbon fibers: effects of electrodeposition of titanium di (dioctyl pyrophosphate)oxyacetate, J. Mater. Sci., 21, 3912, 1986.
144. Olsson, D. M., Estimation for mixtures of distributions by direct maximization of the likelihood function, J. Qual. Tech., 11, 153, 1979.
145. Draper, N. R. and Smith, H., Applied Regression Analysis, 2nd ed., John Wiley & Sons, New York, 1981, chap. 10.
146. Kelly, A. and Tyson, W. R., Tensile properties of fiber reinforced metals Cu/W, Cu/Mo, J. Mech. Phys. Solids, 13, 329, 1956.
147. Beetz, C. P., Jr., A self-consistent Weibull analysis of carbon fiber strength distributions, Fiber Sci. Technol., 16, 81, 1982.
148. Asloun, El. M., Donnet, J.-B., Guilpain, G., Mardin, M., and Schultz, J., On the estimation of the tensile strength of carbon fibers at short lengths, J. Mater. Sci., 24, 3504, 1989.
149. Waterbury, M. C. and Drzal, L. T., On the determination of fiber strengths by in situ fiber strength testing, J. Compos. Tech. Res., 13, 22, 1991.
150. Krucinska, I., Evaluation of intrinsic mechanical properties of carbon fibers, Compos. Sci. Tech., 41, 287, 1991.
151. Bennett, S. C., Johnson, D. J., and Johnson, W., Strength-structure relationships in PAN-based carbon fibers, J. Mater. Sci., 18, 3337, 1983.
152. Reynolds, W. N. and Sharp, J. V., Crystal shear limit to carbon fiber strength, Carbon, 12, 103, 1974.
153. Endo, M., Structure of mesophase pitch-based carbon fibers, J. Mater. Sci., 23, 598, 1988.
154. Guigon, M., Oberlin, A., and Desarmot, G., Microtexture and structure of some high-modulus PAN-based carbon fibers, Fiber Sci. Technol., 20, 177, 1984.
155. Guigon, M., Oberlin, A., and Desarmot, G., Microtexture and structure of some high tensile strength, PAN-based carbon fibers, Fiber Sci. Technol., 20, 55, 1984.
156. Guigon, M. and Oberlin, A., Heat-treatment of high tensile strength PAN-based carbon fibers: microtexture, structure and mechanical properties, Compos. Sci. Tech., 27, 1, 1986.
157. Tanabe, Y., Yasuda, E., Bunsell, A. R., Favry, Y., Inagaki, M., and Sakai, M., The strength of pitch-based carbon fiber at high temperature, J. Mater. Sci., 26, 1061,1991.
158. Beetz, C. P., Jr., Strain-induced stiffening of carbon fibers, Fiber Sci. Technol., 16, 219, 1982.
159. Curtis, C. J., Milne, J. M., and Reynolds, W. N., Non-Hookian behavior of strong carbon fibers, Nature, 220, 1024, 1968.
160. Voet, A. and Morawski, J. C., Dynamic mechanical properties of carbon fibers, Extended Abstr., 12th Biennial Conf. on Carbon, 1975, 87.
161. Henrichsen, R. E and Fischbach, D. B., Torsional non-linear elasticity and damping of carbon fibers, Extended Abstr., 12th Biennial Conf. on Carbon, 1975, 135.
162. Fischbach, D. B. and Srinivasagopalan, S., Dynamic torsional behavior of carbon fibers from pitch mesophase, 5th Lond. Int. Conf. on Ind. Carbon and Graphite, September 1978, 389.
163. Jones, W. R. and Johnson, J. W., Intrinsic strength and non-Hookian behavior of carbon fibers, Carbon, 9, 645, 1971.
164. Kowalski, I. M., Characterizing the tensile stress-strain nonlinearity of polyacryloni- trile-based carbon fibers, in Composite Materials: Testing and Design, ASTM STP 972, Whitcomb, J. D„ Ed., ASTM, Philadelphia, 1988, 205.
165. Bacon, R. and Schalamon, W. A., Physical properties of high modulus graphite fibers made from a rayon precursor, J. Appl. Polym. Sci. Appl. Polym. Symp., 9, 285, 1969.
166. Northolt, M. G., Veldhuizen, L. H., and Jansen, H., Tensile deformation of carbon fibers and the relationship with the modulus for shear between the basal planes, Carbon, 29, 1267, 1991.
167. Ruland, W., The relationship between preferred orientation and Young’s modulus of carbon fibers, J. Appl. Polym. Sci. Appl. Polym. Symp., 9, 283, 1969.
168. Li, C.-T. and Tietz, J. V. V., Improved accuracy of the laser diffraction technique for diameter measurement of small fibers, J. Mater. Sci., 25, 4694, 1990.
169. Chen, K. J. and Diefendorf, R. J., Residual stress in high modulus carbon fibers, in Progress in Science and Engineering of Composites, Hayashi, T., Kawata, K, and Umekawa, S., Eds., ICCM-IV, Tokyo, 1982, 97.
170. Jones, B. H. and Duncan, R. G., The effect of fiber diameter on the mechanical properties of graphite fibers manufactured from polyacrylonitrile and rayon, J. Mater. Sci., 6, 289, 1971.
171. Morita, K., Miyachi, H., Kobori, K., and Matsbara, I., Carbon fibers with large breaking strain, High Temp. High Pressures, 9, 193, 1977.
172. Wagoner, G. and Bacon, R., Elastic Constants and Thermal Expansion Coefficients of Various Carbon Fibers, Extended Abstr., 19th Biennial Conf. on Carbon, 1989, 296.
173. Krucinska, I. and Stypka, T., Direct measurement of the axial Poisson’s ratio of single carbon fibers, Compos. Sci. Tech., 41, 1, 1991.
174. Sines, G., Yang, Z., and Vickers, B. D., Creep of carbon yarn and a carbon-carbon composite at high temperatures and high stresses, Carbon, 27, 403, 1989.
175. Sinclair, D., A bending method for measurement of the tensile strength and Young’s modulus of glass fibers, J. Appl. Phys., 21, 380, 1970.
176. Williams, W. S., Steffens, D. A., and Bacon, R., Bending behavior and tensile strength of carbon fibers, J. Appl. Phys., 41, 4893, 1970.
177. Ng, C. B., Henderson, G. W., Buechler, M., and White, J. L., Fracture Behavior of Mesophase Carbon Fiber, Extended Abstr., 16th Biennial Conf. on Carbon, 1983, 515.
178. Hawthorne, H. M. and Teghtsoonian, E., Axial compression fracture in carbon fibers, J. Mater. Sci., 10, 41, 1975.
179. Ohsawa, T., Miwa, M., Kawade, M., and Tsushima, E., Axial compressive strength of carbon fiber, J. Appl. Polym. Sci., 39, 1733, 1990.
180. Boll, D. J., Jensen, R. M., Cordner, L., and Bascom, W. D., Compression behavior of single carbon filaments embedded in an epoxy polymer, J. Compos. Mater., 24, 208, 1990.
181. DeTeresa, S. J., Piezoresistivity and failure of carbon filaments in axial compression, Carbon, 29, 397, 1991.
182. Wagner, H. D., Migliaresi, C., Gilbert, A. H., and Marom, G., Transverse loading of monofilament reinforced microcomposites: a novel fragmentation technique for measuring the fiber compressive strength, J. Mater. Sci., 27, 4175, 1992.
183. DeTeresa, S. J., Porter, R. S., and Ferris, R. J., Experimental verification of a microbuckling model for the axial compressive failure of high strength performance polymer fibers, J. Mater. Sci., 23, 1886, 1988.
184. Allen, S. R., Tensile recoil measurement of compressive strength for polymeric high performance fibers, J. Mater. Sci., 22, 853, 1987.
185. Wang, C. S., Bai, S. J., and Rice, B. P., Axial compressive strengths of high- performance fibers by tensile recoil technique, Polym. Mater. Sci. Eng., 61,550,1989.
186. McGarry, F. J. and Moalli, J. E., Mechanical behavior of rigid rod polymer fibers: 1. Measurement of axial compressive and transverse tensile properties, Polymer, 32, 1811, 1991.
187. Macturk, K. S., Eby, R. K., and Adams, W. W., Characterization of compressive properties of high performance polymer fibers with a new microcompression apparatus, Polymer, 32, 1782, 1991.
188. Fawaz, S. A., Palazotto, A. N., and Wang, C. S., Axial tensile and compressive properties of high-performance polymeric fibers, Polymer, 33, 100, 1992.
189. Tuinstra, F. and Koenig, J. L., Characterization of graphite fiber surfaces with raman spectroscopy, J. Compos. Mater., 4, 492, 1970.
190. Chieu, T. C., Dresselhaus, M. S., and Endo, M., Raman studies of benzene-derived graphite fibers, Phys. Rev., B26, 5867, 1982.
191. Melanitis, N. and Galiotis, C., Compressional behavior of carbon fibers. Part 1. A raman spectroscopic study, J. Mater. Sci., 25, 5081, 1990.
192. Everall, N. and Lumsdon, J., Fundamental reproducibility of raman band positions and strain measurements of high-modulus carbon fibers — the effect of laser-induced heating, J. Mater. Sci., 26, 5269, 1991.
193. Everall, N. J., Lumsdon, J., and Christopher, D. J., The effect of laser-induced heating upon the vibrational Raman spectra of graphites and carbon fibers, Carbon, 29, 133, 1991.
194. Standard test method for compression properties of rigid plastics, ASTM D 695-91.
195. Standard test method for compressive properties of unidirectional or crossply fiber- resin composites, ASTM Standard D 3410-87.
196. Odom, E. M. and Adams, D. F., Failure modes of unidirectional carbon/epoxy composite compression specimens, Composites, 21, 289, 1990.
197. Curtis, P. T., Gates, J., and Molyneux, C. G., An improved engineering test method for measurement of the compressive strength of unidirectional carbon fiber composites, Composites, 22, 363, 1991.
198. Kumar, S., Adams, W. W., and Helminiak, T. E., Uniaxial compressive strength of high modulus fibers for composites, J. Reinf. Plast. Compos., 7, 108, 1988.
199. Kawabata, S., Measurements of anisotropic mechanical property and thermal conductivity of single fiber for several high performance fibers, in Proc. 4th Jpn.-U.S. Conf. on Composite Materials, Technomic Press, Lancaster, PA, 1988, 253.
200. Johnson, D. J. and Park, C. R., Structure-compressional property relationships in carbon fibers, Extended Abstr., 20th Biennial Conf. on Carbon, 1991, 224.
201. Johnson, D. J., Structure and properties of carbon fibers, in Carbon Fibers, Filaments, and Composites, Figueiredo, J. L., Bernardo, C. A., Baker, R. T. K., and Huttinger, K. J., Eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1990, 119.
202. Vezie, D. L. and Adams, W. W., High resolution scanning electron microscopy of PAN-based and pitch-based carbon fiber, J. Mater. Sci. Lett., 9, 883, 1990.
203. Norita, T., Kitano, A., and Noguchi, K., Compressive strength of fiber reinforced composite materials-effect of fiber properties, Proc. 4th Jpn.-U.S. Conf. on Composite Materials, Technomic Press, Lancaster, PA, 1988, 548.
204. Furuyama, M., Higuchi, M., Kubomura, K., Jiang, H., and Kumar, S., Compressive properties of single-filament carbon fibers, J. Mater. Sci., 28, 1611, 1993.
205. Kumar, S., Anderson, D. P., and Crasto, A. S., Carbon fiber compressive strength and its dependence on structure and morphology, J. Mater. Sci., 28, 423, 1992.
206. Ewins, P. D. and Potter, R. T., Some observations on the nature of fiber reinforced plastics and the implications for structural design, Phil. Trans. R. Soc. Lond., A294, 507, 1980.
207. Dobb, M. G., Johnson, D. J., and Park, C. R., Compressional behavior of carbon fibers, J. Mater. Sci., 25, 829, 1990.
208. Hahn, H. T. and Sohi, M. M., Buckling of a fiber bundle embedded in epoxy, Compos. Sci. Tech., 27, 25, 1986.
209. Kumar, S., Structure and properties of high performance polymeric and carbon fibers-an overview, SAM PE Q., 20, 3, 1989.
210. Kumar, S. and Helminiak, T. E., Compressive strength of high performance fibers, SAMPEJ., 26, 51, 1990.
211. Matsuhisa, Y., Washiyama, M., Hiramatsu, T., Fujino, H., and Katagiri, G., Structures and mechanical properties of ion implanted PAN and pitch based carbon fibers, Extended Abstr., 20th Biennial Conf. on Carbon, 1991, 226.
212. Anderson, D. P. and Kumar, S., Compressive strength and morphology of pitch- and PAN-based carbon fibers, SPE Antec, 36, 1248, 1990.
213. Mehta, V. R. and Kumar, S., Temperature dependent torsional properties of high performance fibers and their relevance to compressive strength, J. Mater. Sci., to be published, 1994.
214. Drzal, L. T. and Madhukar, M., Fiber-matrix adhesion and its relationship to composite mechanical properties, J. Mater. Sci., 28, 569, 1993.
215. Wolff, E. G., Stiffness-thermal expansion relationships in high modulus carbon fibers, J. Compos. Mater., 21, 81, 1987.
216. Heremans, J., Beetz, C. P., Jr., Rahim, I., and Dresselhaus, M. S., Low temperature thermal conductivity of graphite fibers, in Thermal Conductivity, Vol. 19, Proc. of 19th Int. Thermal Conductivity Conf., Yarborough, D. W., Ed., Plenum Press, 1985, 331.
217. Nysten, B., Piraux, L., and Issi, J.-P., Use of thermal conductivity measurements as a method to characterize carbon fibers, in Thermal Conductivity, Vol. 19, Proc. of 19th Int. Thermal Conductivity Conf., Yarborough, D. W., Ed., Plenum Press, 1985, 341
218. Ratner, B. D., Characterization of biomaterial surfaces, in Cardiovascular Pathology, Vol. 2, No. 3 (Suppl.), Elsevier Science Publishing Co., Inc., New York, 1993, chap. 8.
219. McKee, D. W. and Mimeault, V. J., Surface properties of carbon fibers, in Chemistry and Physics of Carbon, Vol. 8, Walker, P. L., Jr. and Thrower, P. A., Eds., Marcel Dekker, New York, 1973, 151.
220. Boehm, H. P., Heck, W., and Sappok, R., Surface oxides of carbon, Angew Chem., 76, 742, 1964; Int. Ed., 3, 669, 1964.
221. Papirer, E., Li, S., and Donnet, J.-B., Contribution to the study of basic surface groups on carbons, Carbon, 25, 243, 1987.
222. Waltersson, K., ESCA studies of carbon fibers: Part I — the chemical composition of a carbon fiber surface, Fiber Sci. Technol., 17, 289, 1982.
223. Xie, Y. and Sherwood, P. M. A., X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 10. Valence-band studies interpreted by X-a calculations and the differences between poly(acrylonitrile) and pitch-based fibers, Chem. Mater., 1, 427, 1989.
224. Takahagi, T. and Ishitani, A., XPS study on the surface structure of carbon fibers using chemical modification and Cls line shape analysis, Carbon, 26, 389, 1988.
225. Nakayama, Y., Soeda, F., and Ishitani, A., XPS study of the carbon fiber matrix interface, Carbon, 28, 21, 1990.
226. Harvey, J., Kozlowski, C., and Sherwood, P. M. A., X-ray photoelectron spectroscopic studies of carbon fiber surfaces: Part 6. Pilot plant surface treatment and epoxy resin composites, J Mater. Sci., 22, 1585, 1987.
227. Santiago, F., Mansour, A. N., and Lee, R. N., XPS study of sizing removal from carbon fibers, J Surf Interface Anal., 10, 17, 1987.
228. Takahagi, T. and Ishitani, A., XPS studies by use of the digital difference spectrum technique of functional groups on the surface of carbon fiber, Carbon, 22, 43, 1984.
229. Desimoni, E., Casella, G. I., Salvi, A. M., Cataldi, T. R. I., and Morone, A., XPS investigation of ultra-high-vacuum storage effects on carbon fiber surfaces, Carbon, 30, 527, 1992.
230. Jones, C., The use of surface signal enhancement techniques in X-ray photoelectronic studies of carbon fiber surfaces, Carbon, 27, 487, 1989.
231. DeVilbiss, T. A. and Wightman, J. P., Surface characteristics of carbon fibers, in Composite Interfaces, Ishida H. and Koenig, J. L., Eds., North-Holland, New York, 1985, 307.
232. Chan, D., Hozbor, M. A., Bayramli, E., and Powell, R. L., Surface characterization of intermediate modulus graphite fibers via surface free energy measurements and ESCA, Carbon, 29, 1091, 1991.
233. Bradley, R. H. and Setterfield, C. H., Novel surface studies of carbon fibers, Extended Abstr., 20th Biennial Conf. on Carbon, 1991, 100.
234. Chun, B. W., Davis, C. R., He, Q., and Gustafson, R. R., Development of surface acidity during electrochemical treatment of PAN-carbon fibers, Carbon, 30, 177, 1992.
235. Lin, S. S., Oxygen Concentrations on Surfaces of Carbon Fibers, an Unclassified U.S. Army Materials Technology Laboratory Report, MTL-TR-89-99, 1989.
236. Ishitani, A., Ishida, H., Katagiri, G., and Tomita S., New technique for characterization of surfaces and interfaces of carbon fibers, in Composite Interfaces, Ishida, H. and Koenig, J. L., Eds., North-Holland, New York, 1986, 195.
237. Denison, P., Jones, F. R., Brown, A., Humphrey, P., and Harvey, J., Scanning secondary ion mass spectroscopic studies of the micromechanics and chemical structure in the region of the interface in carbon fiber-epoxy composites, J Mater. Sci., 23, 2153, 1988.
238. Sellitti, C., Koenig, J. L., and Ishida, H., Surface characterization of graphitized carbon fibers by attenuated total reflection Fourier transform infrared spectroscopy, Carbon, 28, 221, 1990.
239. Hata, T., Kitazaki, Y., and Saito, T., Estimation of the surface energy of polymer solids, in Adhesion International 1987, Sharpe, L. H., Ed., Gordon and Breach, New York, 1988, 1.
240. Fowkes, F. W., Dispersion force contributions to surface and interfacial tensions, contact angles and heats of immersion, in Contact Angle, Wettability and Adhesion, Advances in Chemistry Series, No. 43, Fowkes, F. W., Ed., American Chemical Society, Washington, D.C., 1964, 99.
241. Kaelble, D. H. and Uy, K. C., A reinterpretation of organic liquid-polytetra- fluoroethylene surface interactions, J Adhesion, 2, 50, 1970.
242. Owens, D. K. and Wendt, R. C., Estimation of the surface free energy of polymers, J Appl. Polym. Sci., 13, 1741, 1969.
243. Wu, S., Polar and nonpolar interactions on adhesion, J Adhesion, 5, 39, 1973.
244. Hiittinger, K. J., The fundamentals of chemical interactions in composite interfaces, in Carbon Fibers, Filaments, and Composites, Figueiredo, J. L., Bernardo, C. A., Baker, R. T. K., and Hiittinger, K. J., Eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1990, 245.
245. Fowkes, F. W., Role of acid-base interfacial bonding in adhesion, J. Adhesion Sci. Tech., 1, 7, 1987.
246. Gilbert, A. H., Goldstein, B., and Marom, G., A liquid droplet measurement technique as a means of assessing the interlaminar shear strength of fiber-reinforced composites, Composites, 21, 408, 1990.
247. Hammer, G. H. and Drzal, L. T., Graphite fiber surface analysis by X-ray photoelectron spectroscopy and polar/dispersive free energy analysis, Appl. Surface Sci., 4,340, 1980.
248. Morra, M., Occhiello, E., and Garbassi, F., Surface studies on untreated and plasma treated carbon fibers, Comp. Sci. Tech., 42, 361, 1991.
249. Tsutsumi, K., Ishida, S., and Shibata, K., Determination of the surface free energy of modified carbon fibers and its relation to the work of adhesion, Colloid Polym. Sci., 268, 31, 1990.
250. Drzal, L. T., Mecher, J. A., and Hall, D. L., The surface composition and energetics of type HM graphite fiber, Carbon, 17, 375, 1979.
251. Schultz, J., Cazeneuve, C., Shanahan, M. E. R., and Donnet, J.-B., Fiber surface energy characterization, J. Adhesion, 12, 21, 1981.
252. Bolvari, A. E., Ward, T. C., and Sheehy, D. P., Experimental techniques for inverse gas chromatography, in Inverse Gas Chromatography, ACS Symp. Ser. No. 391, Lloyd, D. R., Ward, T. C., and Schreiber, H. P., Eds., American Chemical Society, Washington, D.C., 1989, 12.
253. Lavielle, L. and Schultz, J., Surface properties of carbon fibers determined by inverse gas chromatography: role of pretreatment, Langmuir, 7, 978, 1991.
254. Schultz, J. and Lavielle, L., Interfacial properties of carbon fiber-epoxy matrix composites, in Inverse Gas Chromatography, ACS Symp. Ser. No. 391, Lloyd, D. R., Ward, T. C., and Schreiber, H. P., Eds., American Chemical Society, Washington D.C., 1989, 185.
255. Guillet, J. E., Romansky, M., Price, G. P., and van der Mark, R., Studies in polymer structure and interactions by automated inverse gas chromatography, in Inverse Gas Chromatography, ACS Symp. Ser. No. 391, Lloyd, D. R., Ward, T. C., and Schreiber, H. P., Eds., American Chemical Society, Washington, D.C., 1989, 20.
256. Vukov, A. J. and Gray, D. G., Properties of carbon fiber surfaces, in Inverse Gas Chromatography, ACS Symp. Ser. No. 391, Lloyd, D. R., Ward, T. C., and Schreiber, H. P., Eds., American Chemical Society, Washington D.C., 1989, 168.
257. Laine, N. R., Vastola, F. J., and Walker, P. L., Jr., The importance of active surface area in the carbon-oxygen reaction, J. Phys. Chem., 67, 2030, 1963.
258. Ismail, I. M. K., Structure and active surface area of carbon fibers, Carbon, 25, 653, 1987.
259. Ismail, I. M. K. and Hoffman, W. P., Surface characterization of a graphitized rayon fabric, Carbon, 29, 587, 1991.
260. Hoffman, W. P., Scanning probe microscopy of carbon fiber surfaces, Carbon, 30, 315, 1992.
261. Hoffman, W. P., Hurley, W. C., Owens, T. W., and Phan, H. T., Advantage of the scanning tunnelling microscope in documenting changes in carbon fiber surface morphology brought about by various surface treatments, J. Mater. Sci., 26, 4545, 1991.
262. Hoffman, W. P., Hurley, W. C., Liu, P. M., and Owens, T. W., The surface topography of non-shear treated pitch and PAN carbon fibers as viewed by the STM, J. Mater. Res., 6, 1685, 1991.
263. Marshall, P. and Price, J., Topography of carbon fiber surfaces, Composites, 22, 388, 1991.
264. Venables, J. D., McNamara, D. K., Chen, J. M., and Hopping, T. S., Oxide morphologies of aluminum prepared for adhesive bonding, Appl. Surf. Sci., 3, 88, 1979.
265. Piggott, M. R., Failure processes in the fiber-matrix interphase, Compos. Sci. Tech., 42, 57, 1991.
266. Carroll, B. J., Equilibrium conformations of liquid drops on thin cylinders under forces of capillarity. A theory for the roll-up process, Langmuir, 2, 248, 1986.
267. Rao, V. and Drzal, L. T., Loss of curing agent during thin film (droplet) curing of thermoset material, J. Adhesion, 35, 245, 1991.
268. Grande, D. H., Mandell, J. F., and Hong, K. C. C., Fiber-matrix bond strength studies of glass, ceramic, and metal matrix composites, J. Mater. Sci., 23, 311, 1988.
269. Drzal, L. T., Rich, M. J., and Lloyd, P. F., Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment, J. Adhesion, 16, 1, 1982.
270. Bascom, W. D. and Jensen, R. M., Stress-transfer in single fiber/resin tensile tests, J. Adhesion, 19, 219, 1986.
271. Figueroa, J. C., Carney, T. E., Schadler, L. S., and Laird, C., Micromechanics of single fiber composites, Compos. Sci. Tech., 42, 77, 1991.
272. Jacques, D. and Favre, J. P., Determination of the interfacial shear strength by fiber fragmentation in resin systems with a small rupture strain, in 6th International Conference on Composite Materials, Vol. 5, Mathews, F. L., Buskell, N. C. R., and Hodgkinson, J. M., Eds., Elsevier Applied Science, New York, 1987, 471.
273. Netravali, A. N., Topoleski, L. T. T., Sache, W. H., and Phoenix, S. L., An acoustic emission technique for measuring fiber fragment length distribution in the singlefiber-composite test, Compos. Sci. Tech., 35, 13, 1989.
274. Herrera-Franco, P. J. and Drzal, L. T., Comparison of methods for the measurement of fiber/matrix adhesion in composites, Composites, 23, 2, 1992.
275. Piggott, M. R., Interface properties and their influence of fiber-reinforced polymers, in Composite Applications: The Role of Matrix, Fiber, and Interface, Vigo, T. and Kinzig, B., Eds., VCH Publishers, 1992, 221.
276. Standard practice for in-plane shear stress-strain response for unidirectional polymer matrix composites, ASTM D 3518.
277. Standard test method for apparent interlaminar shear strength of parallel fiber composites by short-beam method, ASTM D 2344-84
278. Cox, H. L., Br. J. Appl. Phys., 3, 72, 1952.
279. Drzal, L. T., The effect of polymeric matrix mechanical properties on the fiber-matrix interfacial shear strength. Mater. Sci. Eng., A126, 289, 1990.
280. Rao, V. and Drzal, L. T., The dependence of interfacial shear strength on matrix and interphase properties, Polym. Compos., 12, 48, 1991
281. Delmonte, J., Technology of Carbon and Graphite Fiber Composites, Van Nostrand Reinhold, New York, 1981.
282. Riggs, D. M., Shuford, R. J., and Lewis, R. W., Graphite fibers and composites, in Handbook of Composites, Lubin, G., Ed., Van Nostrand Reinhold, New York, 1982, 196.
283. Ehrburger, P. and Donnet, J.-B., Surface treatment of carbon fibers for resin matrices, in Handbook of Composites, Vol. 1 - Strong Fibers, Watt, W. and Perov, B. V., Eds., Elsevier, New York, 1985, 577.
284. Riggs, J. P., Carbon fibers, in Encyclopedia of Polymer Science and Engineering, Vol. 2, John Wiley & Sons, New York, 1985, 640.
285. Donnet, J.-B. and Bansal, R. C., Carbon Fibers, 2nd ed., Marcel Dekker, New York, 1990.
286. Wright, W. W., The carbon fiber/epoxy resin interphase — a review, Compos. Polym., 3, 231, 1990.
287. Wright, W. W., The carbon fiber epoxy resin interphase — a review, Part II, Compos. Polym., 3, 360, 1990.
288. Drzal, L. T., Rich, M. J., and Lloyd, P. F., Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment, J. Adhesion, 16, 1, 1982.
289. Morita, K., Murata, Y., Ishitani, A., Murayama, K., Ono, T., and Nakajima, A., Characterization of commercially available PAN-based carbon fibers, Pure Appl. Chem., 58, 455, 1986.
290. Donnet, J.-B. and Guilpain, G., Surface treatments and properties of carbon fibers, Carbon, 27, 749, 1989.
291. Weinberg, N. L. and Reddy, T. B., Electrochemical oxidation of the surface of graphite fibers, J. Appl. Electrochem., 3, 73, 1973.
292. Harvey, J., Kozlowski, C., and Sherwood, P. M. A., X-ray photoelectron spectroscopic studies of carbon fiber surfaces: Part 6. Pilot plant surface treatment and epoxy resin composites, J. Mater. Sci., 22, 1585, 1987.
293. Kozlowski, C. and Sherwood, P. M. A., X-ray photoelectron spectroscopic studies of carbon fiber surfaces VIII. — A comparison of type I and type II fibers and their interaction with thin resin films, Carbon, 25, 751, 1987.
294. Denison, P., Jones, F. R., Brown, A., Humphrey, P., and Harvey, J., Scanning secondary ion mass spectroscopic studies of the micromechanics and chemical structure in the region of the interface in carbon fiber-epoxy composites, J. Mater. Sci., 23, 2153, 1988.
295. DeVilbiss, T. A. and Wightman, J. P., Surface characteristics of carbon fibers, in Composite Interfaces, Ishida, H. and Koenig, J. L., Eds., North-Holland, New York, 1986, 307.
296. Norita, T., Matsui, J., and Matsuda, H. S., Effect of surface treatment of carbon fiber on mechanical properties of CFRP, in Composite Interfaces, Ishida H. and Koenig, J. L., Eds., North-Holland, New York, 1986, 123.
297. Chun, B. W., Davis, C. R., He, Q., and Gustafson, R. R., Development of surface acidity during electrochemical treatment of PAN-carbon fibers, Carbon, 30, 177, 1992.
298. Liston, E. M., Plasma treatment for improved bonding: A review, J. Adhesion, 30, 199, 1989.
299. Allred, R. E. and Stoller, H. M., Effect pf argon plasma pretreatment on amination of polyaramid filaments, Proc. 18th Int. SAMPE Tech. Conf., 1986, 993.
300. Bascom, W. D. and Chen, W. J., Effect of plasma treatment on the adhesion of carbon fibers to thermoplastic polymers, J. Adhesion, 34, 99, 1991.
301. Morra, M., Occhiello, E., and Garbassi, F., Surface studies on untreated and plasma treated carbon fibers, Compos. Sci. Tech., 42, 361, 1991.
302. Jones, C. and Sammann, E., The effect of low power plasmas on carbon fiber surfaces, Carbon, 28, 509, 1990.
303. Loh, I. H., Cohen, R. E., and Baddour, R. F., Modification of carbon surfaces in cold plasma, J. Mater. Sci., 22, 2937, 1987.
304. Jones, C. and Sammann, E., The effect of low power plasmas on carbon fiber surfaces: a comparison between low and high modulus PAN based fibers with pitch based fibers, Carbon, 28, 515, 1990.
305. Da, Y., Wang, D., Sun, M., Chen, C., and Yue, J., A study of the surface of carbon fiber by means of X-ray photoelectron spectroscopy — III, Compos. Sci. Tech., 30, 119, 1987.
306. Gaur, U., Desio, G., and Miller, B., Measuring fiber/matrix adhesion in thermoplastic composites, Plast. Eng., 45, 43, 1989.
307. Hoffman, W. P., Scanning probe microscopy of carbon fiber surfaces, Carbon, 30, 315, 1992.
308. Subramanian, R. V., Electrochemical polymerization on graphite fibers, Pure Appl. Chem., 52, 1929, 1980.
309. Crasto, A., Own, S. H., and Subramanian, R. V., Interphase modification in carbon- fiber composites by electrodeposition, in Composite Interfaces, Ishida H. and Koenig, J. L., Eds., North-Holland, New York, 1986, 133.
310. Chiu, H.-T. and Lin, J.-S., Electrochemical deposition of polypyrrole on carbon fibers for improved adhesion to the epoxy resin matrix, J. Mater. Sci., 27, 319, 1992.
311. Drzal, L. T., Rich, M. J., Koenig, M. F., and Lloyd, P. F., Adhesion of graphite fibers to epoxy matrices: II. The effect of fiber finish, J. Adhesion, 16, 133, 1982.
312. Drzal, L. T. and Madhukar, M., Fiber-matrix adhesion and its relationship to composite mechanical properties, J. Mater. Sci., 28, 569, 1993.
313. Lavielle, L. and Schultz, J., Surface properties of carbon fibers determined by inverse gas chromatography: role of pretreatment, Langmuir, 7, 978, 1991.
314. Vukov, A. J. and Gray, D. G., Properties of carbon fiber surfaces, in Inverse Gas Chromatography, ACS Symp. Ser. No. 391, Lloyd, D. R., Ward, T. C., and Schreiber, H. P., Eds., American Chemical Society, Washington, D.C., 1989, 168.
315. Drzal, L. T., Rich, M. J., and Lloyd, P. F., Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment, J. Adhesion, 16, 1, 1982.
316. Santiago, F., Mansour, A. N., and Lee, R. N., XPS study of sizing removal from carbon fibers, J Surf. Interface Anal., 10, 17, 1987.
317. Wachinger, G., The influence of CFRP-sizings on processability and interphase properties, in Controlled Interphases in Composite Materials, Ishida, H., Ed., Elsevier, New York, 1990, 457.
318. Kim, J. and Mai, Y.-W., Effects of interfacial coating and temperature on the fracture behaviors of unidirectional kevlar and carbon fiber reinforced epoxy resin composites, J. Mater. Sci., 26, 4702, 1991.
319. Grenier-Loustalot, M.-F. and Grenier, P., The mechanism of epoxy-resin curing in the presence of glass and carbon fibers, Polymer, 33, 1187, 1992.
320. Bascom, W. D., Yon, K. J., Jensen, R. M., and Cordner, L., The adhesion of carbon fibers to thermoset and thermoplastic polymers, J. Adhesion, 34, 79, 1991.
321. Bolvari, A. E. and Ward, T. C., Determination of fiber-matrix adhesion and acid- base interactions, in Inverse Gas Chromatography: Characterization of Polymers and Other Materials, Lloyd, D. R., Ward, T. C., and Schreiber, H., Eds., American Chemical Society Symp. Ser. No. 391, Washington D.C., 1989, 217.
322. Waterbury, M. C. and Drzal, L. T., Interfacial shear strengths of carbon fibers in bisphenol-A polycarbonate, in Controlled Interphases in Composite Materials, Ishida, H., Ed., Elsevier, New York, 1990, 731.
323. DiLandro, L. and Pegoraro, M., Carbon fiber-thermoplastic matrix adhesion, J. Mater. Sci., 22, 1980, 1987.
324. Hoffman, W. P., Scanning probe microscopy of carbon fiber surfaces, Carbon, 30, 315, 1992.
325. Lee, Y. C. and Porter, R. S., Crystallization of poly(etheretherketone) (PEEK) in carbon fiber composites, Polym. Eng. Sci., 26, 633, 1986.
326. Wang, W., Qi, Z., and Jeronimidis, G., Studies on interface structure and crystal texture of poly(ether-ether-ketone)-carbon fiber composite, J. Mater. Sci., 26, 5915, 1991.
327. Blundell, D. J., Crick, R. A., Fife, B., Peacock, J., Keller, A., and Waddon, A., Spherulitic morphology of the matrix of thermoplastic PEEK/carbon fiber aromatic polymer composites, J. Mater. Sci., 24, 2057, 1989.
328. Thomason, J. L. and Van Rooyen, A. A., Transcrystallized interphase in thermoplastic composites. Part I. Influence of fiber type and crystallization temperature, J. Mater. Sci., 27, 889, 1992.
329. Thomason, J. L. and Van Rooyen, A. A., Transcrystallized interphase in thermoplastic composites. Part II. Influence of interfacial stress, cooling rate, fiber properties, and polymer molecular weight, J. Mater. Sci., 27, 897, 1992.
330. Hsiao, B. S. and Chen, E. J. H., Study of transcrystallization in polymer composites, in Interfaces in Composites, Vol. 170, Pantano, C. G. and Chen, E. J. H., Eds., Materials Research Society, 1990, 117.
331. Fitzer, E. and Weiss, R., Effect of surface treatment and sizing of C-fibers on the mechanical properties of CFR thermosetting and thermoplastic polymers, Carbon, 25, 455, 1987.
332. Fitzer, E. and Weiss, R., Influence of various polar surface oxides on the reinforcement behavior of C-fibers reinforces epoxy composites, Extended Abstr. 16th Biennial Conf. on Carbon, 1983, 473.
333. Lin, S. S. and Yip, P. W., Surface adhesion of carbon fibers after chemical treatments, Extended Abstr. 19th Biennial Conf. on Carbon, 1989, 244.
334. King, T. R., Adams, D. F., and Buttry, D. A., Anodic oxidation of pitch-precursor carbon fibers in ammonium sulfate solutions: batch screening treatment results, Compos. Sci. Tech., 44, 351, 1992.
335. Ehrberger, P. and Donnet, J.-B., Interface in composite materials, Phil. Trans. R. Soc. Lond., A294, 495, 1980.
336. Scola, D. A., Laube, B. L., and Vontell, J. H., Interface characteristics of isothermally aged high temperature graphite fiber/PMR-15 composites, in Controlled Interphases in Composite Materials, Ishida, H., Ed., Chapman & Hall, 1990, 17.
337. Farrow, G. J. and Jones, C., The effect of low power nitrogen plasma treatment of carbon fibers on the interfacial shear strength of carbon fiber/epoxy composites, J. Adhesion, in press, 1994.
338. Fowkes, F. M., Acid-base interactions in polymer adhesion, in Physicochemical Aspects of Polymer Surfaces, Vol. 2, Mittal, K. L., Ed., Plenum Press, New York, 1981, 583.
339. Schultz, J. and Lavielle, L., Interfacial properties of carbon fiber-epoxy matrix composites, in Inverse Gas Chromatography, ACS Symp. Ser. No. 391, Lloyd, D. R., Ward, T. C., and Schreiber, H. P., Eds., American Chemical Society, Washington, D. C., 1989, 185.
340. Nardin, M., Asloun, E. M., and Schultz, J., Physico-chemical interactions between carbon fibers and PEEK, in Controlled Interphases in Composite Materials, Ishida, H., Ed., Elsevier, New York, 1990, 285.
341. Garton, A. W. and Stevenson, T. K., Spectroscopic characterization of the carbon- epoxy interphase, in Composite Interfaces, Ishida, H. and Koenig, J. L., Eds., North- Holland, New York, 1986, 265.
342. Snow, A. W., Adsorption of spin labeled polymers on carbon fibers for composite interface studies, Mater. Sci. Eng., A162, 229, 1993.
343. Sharpe, L. H., Interfaces, interphases and “adhesion”: a perspective, The Interfacial Interactions in Polymeric Composites (NATO ASI Series No. 230), Akovali, G., Ed., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1993, 1.
344. Herrera-Franco, P. J. and Drzal, L. T., Comparison of methods for the measurement of fiber/matrix adhesion in composites, Composites, 23, 2, 1992.
345. Prewo, K. M., Brennan, J. J., and Layden, G. K., Fiber reinforced glasses and glass- ceramics for high performance applications, Am. Ceram. Soc. Bull., 65, 305, 1986.
346. Cornie, J. A., Chiang, V.-M., Uhlmann, D. R., Mortensen, A., and Collins, J. H., Processing of metal and ceramic matrix composites, Am. Ceram. Soc. Bull., 65, 293, 1986.
347. Schioler, L. J. and Stiglich, J. J. Jr., Ceramic matrix composites: a literature review, Am. Ceram. Soc. Bull., 65, 289, 1986.
348. Treadway, W. K., Prewo, K. M., and Pantano, C. G., Fiber-matrix interfacial effects in carbon-fiber-reinforced glass matrix composites, Carbon, 27, 717, 1989.
349. Inagaki, M., Research and development on carbon/ceramic composites in Japan, Carbon, 29, 287, 1991.
350. Suzuki, T., Sato, M., and Sakai, M., Fiber pullout processes and mechanisms of a carbon fiber reinforced silicon nitride ceramic composite, J. Mater. Res., 7, 2869, 1992.
351. Wang, Z. G., Laird, C., Hashin, Z., Rosen, B. W., and Yen, C.-F., Mechanical behavior of a cross-weave ceramic matrix composite. Part I. Tensile and compressive loading, J. Mater. Sci., 26, 4751, 1991.
352. Benson, P. M., Spear, K. E., and Pantano, C. G., Thermochemical analysis of interface reactions in carbon-fiber reinforced glass matrix composites, in Ceramic Microstructures’86 — Role of Interfaces, Pask, J. A. and Evans, A. G., Eds., Plenum Press, New York, 1987, 415.
353. Qi, D. and Pantano, C. G., Effects of composite processing on the performance of carbon fiber/glass matrix composites, Proc. 16th Annu. Conf. Composites and Adv. Ceramic Materials, American Ceramic Society, Waterville, OH, 1992, 863.
354. Bleay, S. M. and Scott, V. D., Microstructure and micromechanics of the interface in carbon fiber reinforced pyrex glass, J. Mater. Sci., 26, 3544, 1991.
355. Bleay, S. M. and Scott, V. D., The role of the interface in the mechanical behavior and oxidation of carbon fiber reinforced pyrex glass, Carbon, 29, 871, 1991.
356. Diefendorf, R. J., Continuous carbon fiber reinforced carbon matrix composites, in Engineered Materials Handbook, Vol. 1, Reinhart, T. J., Ed., ASM International, Metals Park, OH, 1987, 911.
357. McAllister, L. E., Multidirectionally reinforced carbon/graphite matrix composites, in Engineered Materials Handbook, Vol. 1, Reinhart, T. J., Ed., ASM International, Metals Park, OH, 1987, 915.
358. Buckley, J. D., Carbon-carbon, an overview, Ceram. Bull., 67, 364, 1988.
359. Kowbel, W. and Shan, C. H., The mechanism of fiber-matrix interactions in carbon- carbon composites, Carbon, 28, 287, 1990.
360. Fitzer, E., Geigl, K. H., and Hiittner, W., The influence of carbon fiber surface treatment on the mechanical properties of carbon/carbon composites, Carbon, 18, 265, 1980.
361. Hiittinger, K. J. and Krekel, G., Polydimethylsiloxane coated carbon fibers for the production of carbon-fiber reinforced carbon, Carbon, 29, 1065, 1991.
362. Thomas, C. R. and Walker, E. J., Effects of PAN carbon fiber surface in carbon- carbon composites, 5th Lond. Int. Conf. on Carbon and Graphite, 1978, 520.
363. Dubois, J., Agache, C., and White, J. L., The carbonaceous mesophase formed in the pyrolysis of graphitizable organic compounds, Metallography, 3, 337, 1970.
364. Kotosonov, A. S., Vinnikov, V. A., Frolov, V. I., and Ostrenov, B. G., Doklady Akad. Nauk SSSR, 185, 1316, 1969; Effect of mechanical pressure during carbonization of organic polymers on their graphitizability, Doklady Phys. Chem., 185, 278, 1969.
365. Hishiyama, Y., Inagaki, M., Kimura, S., and Yamada, S., Graphitization of carbon fiber/glassy carbon composites, Carbon, 12, 249, 1974.
366. Zaldivar, R. J. and Rellick, G. S., Some observations on stress graphitization in carbon-carbon composites, Carbon, 29, 1155, 1991.
367. Manocha, L. M., Yasuda, E., Tanabe, Y., and Kimura, S., Effect of carbon fiber surface treatment on mechanical properties of C/C composites, Carbon, 26, 333, 1988.
368. Leong, K. and Zimmer, J., Fiber property changes during processing of carbon/carbon composites, Extended Abstr., 18th Biennial Conf. on Carbon, 1987, 22.
369. Zaldivar, R. J., Rellick, G. S., and Yang, J. M., Fiber strength utilization in carbon/carbon composites, J. Mater. Res., 8, 501, 1993.
370. Peebles, L. H., Jr., Meyer, R. A., and Jortner, J., Interfaces in carbon-carbon composites, in Interfaces in Polymer, Ceramic and Metal Matrix Composites, Ishida, H., Ed., Elsevier Science Publishing Co., New York, 1988, 1.
371. Zimmer, J. E. and White, J. L., Disclination structures in the carbonaceous mesophase, in Advances in Liquid Crystals, Vol. 5, Academic Press, New York, 1982, 157.
372. Weisshaus, H., Kenig, S., Kastner, E., and Siegmann, A., Morphology development during procession of carbon-carbon composites, Carbon, 28, 125, 1990.
373. Cranmer, J. H., Plotzker, I. G., Peebles, L. H., Jr., and Uhlmann, D. R., Carbon mesophase-substrate interactions, Carbon, 21, 201, 1983.
374. Jortner, J., Cracking in 3D carbon/carbon composites during processing and effects on performance, in Proc. Army Symp. Solid Mechanics, AMMRC MS 76-2, 1976, 81.
375. Jones, L. E., Thrower, P. A., and Walker, P. L., Jr., Reactivity and related microstructure of 3D carbon/carbon composites, Carbon, 24, 51, 1986.
376. Lee, R. N., Carbon fiber surface properties, in International Encyclopedia of Composites, Vol. 1, Lee, S. M„ Ed., VCH Publishers, New York, 1990, 241.
377. Shindo, A., Chemical property of carbon fiber surface and interfacial compatibility of composites, in Composite Interfaces, Ishida, H. and Koenig, J. L., Eds., North- Holland, New York, 1986, 93.
378. Delannay, F., Froyen, L., and Deruyttere, A., Review: the wetting of solids by molten metals and its relation to the preparation of metal matrix composites, J. Mater. Sci., 22, 1, 1987.
379. Kendall, E. G., Development of metal-matrix composites reinforced with high- modulus graphite fibers, in Metal Matrix Composites, Kreider, K. G., Ed., Academic Press, New York, 1974, 319.
380. Baker, A. A., Carbon fiber reinforced metals — a review of current technology, Mater. Sci. Eng., 17, 177, 1975.
381. Chou, T. C., Kelly, A., and Okura, A., Fiber-reinforced metal matrix composites, Composites, 16, 187, 1985.
382. Rocher, J. P., Girot, F., Quenisset, J. M., Pailler, R., and Naslain, R., Precedes d’elaboration des materiaux composites fibreux & matrice d’alliage base aluminium, (Fabrication Procedures of Fibrous Composites with Aluminum Based Alloys), Memoires. Sci. Rev. Metall., February, 69, 1986.
383. Goddard, D. M., Burke, P. D., Kizer, D. E., Bacon, R., and Harrington, W. C., Continuous graphite fiber MMCs, in Engineered Materials Handbook, Vol. 1, Reinhart, T. J., Ed., ASM International, Metals Park, OH, 1987, 867.
384. Mortensen, A., Cornie, J. A., and Flemings, M. C., Solidification processing of metal-matrix composites, J. Met., 40, February, 12, 1988.
385. Okura, A. and Motoki, K., Rate of formation of intermetallic compounds in aluminum matrix-carbon fiber composites, Compos. Sci. Tech., 24, 243, 1985.
386. Viala, J. C., Fortier, P., Claveyrolas, G., Vincent, H., and Bouix, J., Effect of magnesium on the composition, microstructure and mechanical properties of carbon fibers, J. Mater. Sci., 26, 4977, 1991.
387. Diwanji, A. P. and Hall, I. W., Fiber and fiber-surface treatment effects in carbon/aluminum metal matrix composites, J. Mater. Sci., 27, 2093, 1992.
388. Yang, M. and Scott, V. D., Carbide formation in a carbon fiber reinforced aluminum composite, Carbon, 29, 877, 1991.
389. Amateau, M. F., Progress in the development of graphite-aluminum composites using liquid infiltration technology, J. Compos. Mater., 10, 279, 1976.
390. Kahn, I. H., The effect of thermal exposure on the mechanical properties of alumi- num-graphite composites, Met. Trans., 7A, 1281, 1976.
391. He, C., Zhang, G., and Wu, R., The influence of interfacial modification on tensile strength of Gr/Al composites, in Interfaces in Composites, Pantano, C. G. and Chen, D. J. H., Eds., 170, Materials Research Society, 1990, 257.
392. He, C., Zhang, G., and Wu, R., The effects of matrix alloys on the mechanical properties of graphite/aluminum composites, in Interfaces in Metal-Ceramics Composites, Lin, R. Y., Arsenault, R. J., Martins, G. P., and Fishman, S. G., Eds., The Minerals, Metals, & Materials Society, Warrendale, PA, 1990, 493.
393. Lo, J., Finello, D., Schmerling, M., and Marcus, H. L., Interface structure of heat- treated aluminum-graphite fiber composites, in Mechanical Behavior of Metal-Matrix Composites, Hack, J. E. and Amateau, M. F., Eds., The Metallurgical Society of AIME, Warrendale, PA, 1983, 77.
394. Rawal, S. P., Allard, L. P., and Misra, M. S., Microstructural characterization of interfaces in diffusion-bonded and cast Gr/Mg composites, in Interfaces in Metal Matrix Composites, Dhinga, A. K. and Fishman, S. G., Eds., The Metallurgical Society, Inc., Warrendale, PA, 1986, 211.
395. Honjo, K. and Shindo, A., Influence of carbide formation on the strength of carbon fibers on which silicon and titanium have been deposited, J. Mater. Sci., 21,2043,1986.
396. Sotirchos, S. V. and Papasouliotis, G. D., Kinetic modelling of the deposition of SiC from methyltrichlorosilane, in Chemical Vapor Deposition of Refractory Metals and Ceramics II, Besmann, T. M., Gallois, B. M., and Warren, J. W., Eds., Materials Research Society Symposium Proceedings, Vol. 250, 1992, 35.
397. Honjo, K. and Shindo, A., Interfacial behavior of aluminum matrix composites reinforced with ceramic coated carbon fibers, in Composite Interfaces, Ishida, H. and Koenig, J. L., Eds., North-Holland, New York, 1986, 101.
398. Aggour, L., Fitzer, E., Heym, M., and Ignatowitz, E., Thin coatings on carbon fibers as diffusion barriers and wetting agents in Al composites, Thin Solid Films, 40,97,1977.
399. Bonfield, W., The effect of impurity on reinforcement-matrix composites, in Composite Materials, Vol. I. Interfaces in Metal Matrix Composites, Metcalfe, A. G., Ed., Academic Press, New York, 1974.
400. Abraham, S., Pai, B. C., Satyanarayana, K. G., and Vaidyan, V. K., Studies on nickel coated carbon fibers and their composites, J. Mater. Sci., 25, 2839, 1990.
401. Kulkarni, A. G., Pai, B. C., and Balasubramanian, N., The cementation technique for coating carbon fibers, J. Mater. Sci., 14, 592, 1979.
402. Goldie, W., Metallic Coating of Plastics, Vol. 1, Electrochemical Publications, Ltd., Hatch End, Middlesex, England, 1968.
403. Abraham, S., Pai, B. C., Satyanarayana, K. G., and Vaidyan, V. K., Copper coating on carbon fibers and their composites with aluminum matrix, J. Mater. Sci., 27, 3479, 1992.
404. Subramanian, R. V. and Nyberg, E. A., Zirconia and organotitanate film formation on graphite fiber reinforcement for metal matrix composites, J. Mater. Res., 7, 667, 1992.
405. Katzman, H. A., Fiber coatings for the fabrication of graphite-reinforced magnesium composites, J. Mater. Sci., 22, 144, 1987.
406. Clement, J. P. and Rack, H. J., Interfacial modification in G/Al metal matrix composites, in Symp. on High Temperature Composites, Proc. Am Soc. Compos., Technomic Publishing Co., 1989, 11.
407. 6 surface treatment: application to composite material casting, J. Mater. Sci., 24, 2697, 1989.
408. 6 treated carbon fibers: a degradation study, J. Mater. Sci. Lett., 9, 912, 1990.
409. Patankar, S. N., Gopinathan, V., and Ramakrishnan, P., Studies on carbon fiber reinforced aluminum composite processed using pre-treated carbon fibers, J. Mater. Sci., 26, 4196, 1991.
410. Cappleman, G. R., Watts, J. F., and Cline, T. W., The interface region in squeeze- infiltrated composites containing 8-alumina fiber in an aluminum matrix, J. Mater. Sci., 20, 2159, 1985.
411. Yoshida, M., Ikegami, S., Ohsaki, T., and Ohkita, T., Studies on ion-plating process for making carbon fiber reinforced aluminum and properties of the composites, Soc. Adv. Mater. Proc. Eng., 24, 1417, 1979.
412. Jackson, P. W. and Marjoram, J. R., Recrystallization of nickel-coated carbon fibers, Nature, 218, 83, 1968.
413. Jackson, P. W. and Marjoram, J. R., Compatibility studies of carbon fibers with nickel and cobalt, J. Mater. Sci., 5, 9, 1970.
414. Warren, R., Anderson, C. H., and Carlsson, M., High temperature compatibility of carbon fibers with nickel, J. Mater. Sci., 13, 178, 1978.
415. Erturk, T., Cornie, J. A., and Dixon, R. G., Transverse tensile strength and fracture behavior of graphite/aluminum fiber composites, in Interfaces in Metal Matrix Composites, Dhinga A. K. and Fishman, S. G., Eds., The Metallurgical Society, Inc., Warrendale, PA, 1986, 239.
416. Mortensen, A. and Cornie, J. A., On the infiltration of metal matrix composites, Metallurg. Trans., 18A, 1160, 1987.
417. Li, Q., Zhang, G. D., Blucher, J. T., and Cornie, J. A., Microstructure of the interface and interfiber regions in P-55 reinforced aluminum alloys manufactured by pressure infiltration, in Controlled Interphases in Composite Materials, Ishida, H., Ed., Elsevier, New York, 1990, 131