Practical analysis of composite laminates

Practical Analysis of Composite Laminates

Volumn , Issue , 2018, Pages 1-317

  Reddy, J N ^a   Miravete, Antonio ^b  

^a Texas A and M University   (United States)

^b UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ADVANCED COMPOSITES; AUTOMOTIVE STRUCTURES; COMPOSITE LAMINATE; EXPERIMENTAL CORRELATION; GRADUATE COURSE; PC-BASED SOFTWARE; PRACTICAL METHOD; STRUCTURAL ELEMENTS;

LAMINATED COMPOSITES;

EID: 85052174851     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203742594     Document Type: Book

References (246)

1. Bowen, R. M. and Wang, C. C, Introduction to Vectors and Tensors, Vols. I and II, Plenum Press, New York, 1976.
2. Jeffreys, H., Cartesian Tensors, Cambridge University Press, London,1965.
3. Reddy, J. N. and Rasmussen, M. L., Advanced Engineering Analysis, ohn Wiley & Sons, New York, 1982; reprinted by Krieger, Melbourne, FL, 1990.
4. Reddy, J. N., Mechanics of Composite Materials: Theory and Analysis, John Wiley & Sons, New York, 1996, in press.
5. Eringen, A. C., Mechanics of Continua, John Wiley & Sons, New York, 1967.
6. Fung, Y. C., Foundations of Solid Mechanics, Prentice-Hall, Englewood Cliffs, N.J., 1965.
7. Malvern, L. E., Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Englewood Cliffs, N.J., 1969.
8. Lekhnitskii, S. G., Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day, San Francisco, 1963.
9. Reddy, J. N., Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York, 1984.
10. Reddy, J. N., Mechanics of Composite Materials: Theory and Analysis, John Wiley & Sons, New York, 1996, in press.
11. Agarwal, B. D. and Broutman, L. J., Analysis and Performance of Fiber Composites, John Wiley & Sons, New York, 1980.
12. Ambartsumian, S. A., Theory of Anisotropic Shells, NASA Report TT F-118, 1964.
13. Ambartsumian, S. A., Theory of Anisotropic Plates, Izdat. Nauka, Moskva (1967), English translation by Technomic, Stamford, CT, 1969.
14. Christensen, R. M., Mechanics of Composite Materials, John Wiley & Sons, New York, 1979.
15. Lekhnitskii, S. G., Theory of Elasticity of an Anisotropic Body, Mir Publishers, Moscow (Translated from the revised 1977 Russian Edition), 1982.
16. Jones, R. M., Mechanics of Composite Materials, Scripta Book Co., Washington, D. C, 1975.
17. Mallick, P. K., Fiber-Reinforced Composites. Materials, Manufacturing, and Design, Marcel Dekker, New York, 1988.
18. Reddy, J. N., Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York, 1984.
19. Reddy, J. N., Mechanics of Laminated Composite Structures: Theory and Analysis, Lecture Notes, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, October 1988.
20. Also see Chapters 14 and 15 in: Finite Element Analysis for Engineering Design, J. N. Reddy, C. S. Krishna Moorthy, and K. N. Seetharamu (eds.), Vol. 37, Springer-Verlag, Berlin, 1988.
21. Tsai, S. W. and Hahn, H. T., Introduction to Composite Materials, Technomic, Westport, CT, 1980.
22. Vasiliev, V. V., Mechanics of Composite Structures, Taylor & Francis, Washington, D. C, 1993.
23. Whitney, J. M., Structural Analysis of Laminated Anisotropic Plates, Technomic, Lancaster, PA, 1987.
24. Reddy, J. N. (ed.), Mechanics of Composite Materials. Selected Works of Nicholas J. Pagano, Kluwer Academic Publishers, The Netherlands, 1994.
25. Reddy, J. N., Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York, 1984.
26. Reddy, J. N., Mechanics of Laminated Composite Structures: Theory and Analysis, Lecture Notes, Virginia Polytechnic Institute and State University, Blacksburg, VA, October 1988.
27. Also see Chapters 14 and 15 in: Finite Element Analysis for Engineering Design, J. N. Reddy, C. S. Krishna Moorthy, and K. N. Seetharamu (eds.), Vol. 37, Springer-Verlag, Berlin, 1988.
28. Reddy, J. N., “A Review of Refined Theories of Laminated Plates,” Shock and Vibration Digest, 22 (7), pp. 3-17, 1990.
29. Reddy, J. N, “A General Non-Linear Third-Order Theory of Plates with Transverse Shear Deformation,” Journal of Non-Linear Mechanics, 25 (6), pp. 677-686, 1990.
30. Reddy, J. N., “Generalization of Two-Dimensional Theories of Laminated Composite Plates,” Communications in Applied Numerical Methods, 3, pp. 173-180, 1987.
31. Robbins, D. H. and Reddy, J. N., “Modeling of Thick Composites Using a Layerwise Laminate Theory,” International Journal for Numerical Methods in Engineering, 36, 655-677, 1993.
32. Reddy, J. N. and D. H. Robbins, Jr., “On Structural Theories and Computational Models for Composite Laminates,” Applied Mechanics Reviews, 47 (6), Part 1, pp. 147-170, 1994.
33. Mindlin, R. D., “Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates,” Journal of Applied Mechanics, 18, pp. 31-38, 1951.
34. Basset, A. B., “On the Extension and Flexure of Cylindrical and Spherical Thin Elastic Shells,” Philosophical Transactions of the Royal Society of London, Ser. A, 181 (6), pp. 433-480, 1890.
35. Hildebrand, F. B., Reissner, E., and Thoraas, G. B., “Notes on the Foundations of the Theory of Small Displacements of Orthotropic Shells,” NASA TN-1833, Washington, D. C, 1949.
36. Hencky, H., “Uber die Berücksichtigung der Schubverzerrung in ebenen Platten,” Inginier Archive, 16, pp. 72-76, 1947.
37. Chatterjee, S. N. and Kulkarni, S. V., “Shear Correction Factors for Laminated Plates,” ATA A Journal, 17 (5), pp. 498-499, 1979.
38. Whitney, J. M., “Shear Correction Factors for Orthotropic Laminates Under Static Load,” Journal of Applied Mechanics, 40 (1), pp. 302-304, 1973.
39. Bert, C. W., “Simplified Analysis of Static Shear Factors for Beams of Nonhomogeneous Cross Section,” Journal of Composite Materials, 7, pp. 525-529, 1973.
40. Reddy, J. N., Mechanics of Laminated Composite Structures: Theory and Analysis, John Wiley & Sons, New York, 1996, in press.
41. Khdeir, A. A., Reddy, J. N., and Librescu, L., “Lévy Type Solutions for Symmetrically Laminated Rectangular Plates Using First-Order Shear Deformation Theory,” Journal of Applied Mechanics, 54, pp. 640-642, 1987.
42. Franklin, J. N., Matrix Theory, Prentice-Hall, Englewood Cliffs, NJ, 1968.
43. Brogan, W. L., Modern Control Theory, Prentice-Hall, Englewood Cliffs, NJ, 1985.
44. Reddy, J.N., Mechanics of Laminated Composite Materials and Structures: Theory and Analysis, John Wiley & Sons, New York, 1996.
45. Reddy, J. N., Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York, 1984.
46. Reddy, J. N. and Khdeir, A. A., “Buckling and Vibration of Laminated Composite Plates Using Various Plate Theories,” AIAA Journal, 27 (12), pp. 1808-1817, 1989.
47. Nosier, A. and Reddy, J. N., “On Vibration and Buckling of Symmetric Laminated Plates According to Shear Deformation Theories,” Acta Mechanica, 94 (3-1), pp. 123-170, 1992.
48. Reddy, J. N. and Chao, W. C, “A Comparison of Closed-Form and Finite Element Solutions of Thick Laminated Anisotropic Rectangular Plates,” Nuclear Engineering and Design, 64, pp. 153-167, 1981.
49. Reddy, J. N., An Introduction to the Finite Element Method, Second Edition, McGraw-Hill, New York, 1993.
50. Reddy, J. N., “A Penalty Plate-Bending Element for the Analysis of Laminated Anisotropic Composite Plates,” International Journal for Numerical Methods in Engineering, 15, pp. 1187-1206, 1980.
51. Reddy, J. N., “Analysis of Layered Composite Plates Accounting for Large Deflections and Transverse Shear Strains,” in Recent Advances in Nonlinear Computational Mechanics, E. Hin-ton, D. R. J. Owen, and C. Taylor (eds.), pp. 155-202, 1982.
52. Reddy, J. N., “Geometrically Nonlinear Transient Analysis of Laminated Composite Plates,” AIAA Journal, 21 (4), pp. 621-629, 1983.
53. Reddy, J. N., “On Refined Computational Models of Composite Laminates,” International Journal for Numerical Methods in Engineering, 27, pp. 361-382, 1989.
54. Hughes, T. J. R., The Finite Element Method, Prentice-Hall, Englewood Cliffs, NJ, 1986.
55. Bathe, K. J., Finite Elements in Engineering Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1982.
56. Averill, R. C. and Reddy, J. N., “On the Behavior of Plate Elements Based on the First-Order Shear Deformation Theory,” Engineering Computations, 7(1), pp. 57-74, 1990.
57. Zienkiewicz, O. O, Taylor, R. L. and Too, J. M., “Reduced Integration Technique in General Analysis of Plates and Shells,” International Journal for Numerical Methods in Engineering, 3, pp. 275-290, 1971.
58. Pawsey, S. F. and Clough, R. W., “Improved Numerical Integration of Thick Shell Finite Elements,” International Journal for Numerical Methods in Engineering, 3, pp. 575-586, 1971.
59. Hughes, T. J. R., Cohen, M. and Haroun, M, “Reduced and Selective Integration Techniques in the Finite Element Analysis of Plates,” Nuclear Engineering and Design, 46, pp. 203-222, 1978.
60. Malkus, D. S. and Hughes, T. J. R., “Mixed Finite Element Methods-Reduced and Selective Integration Techniques: A Unification of Concepts,” Computer Methods in Applied Mechanics and Engineering, 15, pp. 63-81, 1978.
61. Lee, S. W. and Pian, T. H. H., “Improvement of Plate and Shell Finite Elements by Mixed Formulations,” AT A A Journal, 16, pp. 29-34, 1978.
62. Spilker, R. L. and Munir, N. I., “The Hybrid-Stress Model for Thin Plates,” International Journal for Numerical Methods in Engineering, 15, pp. 1239-1260, 1980.
63. Park, K. C. and Stanley, G. M., “A Curved C° Shell Element Based on Assumed Natural-Coordinate Strains,” Journal of Applied Mechanics, 53, pp. 278-290, 1986.
64. Bathe, K. J., Dvorkin, E. N. and Ho, L. W., “On Discrete-Kirchhoff and Isoparametric Shell Elements for Nonlinear Analysis - An Assessment,” Computers & Structures, 16, pp. 89-98, 1983.
65. Zienkiewicz, O. C. and Hinton, E., “Reduced Integration, Function Smoothing and Non-Conformity in Finite Element Analysis (with special reference to thick plates),” Journal of the Franklin Institute, 302 (5 & 6), pp. 443-461, 1976.
66. Pugh, E. D. L., Hinton, E. and Zienkiewicz, O. C, “A Study of Quadrilateral Plate Bending Elements with ‘Reduced’ Integration,” International Journal for Numerical Methods in Engineering, 12, pp. 1059-1079, 1978.
67. Barlow, J., “Optimal Stress Location in Finite Element Models,” International Journal for Numerical Methods in Engineering, 10, pp. 243-251, 1976.
68. Barlow, J., “More on Optimal Stress Points - Reduced Integration Element Distortions and Error Estimation,” International Journal for Numerical Methods in Engineering, 28, pp. 1486-1504, 1989.
69. Pagano, N. J., “Exact Solutions for Composite Laminates in Cylindrical Bending,” Journal of Composite Materials, 3, pp. 398-411, 1967.
70. Pagano, N. J., “Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates,” Journal of Composite Materials, 4, pp. 20-34, 1970.
71. Reddy, J. N. and Hsu, Y. S., “Effects of Shear Deformation and Anisotropy on the Thermal Bending of Layered Composite Plates,” Journal of Thermal Stresses, 3, pp. 475-493, 1980.
72. Noor, A. K., “Free Vibrations of Multilayered Composite Plates,” AIAA Journal, 11, pp. 1038-1039, 1973.
73. Noor, A. K., “Stability of Multilayered Composite Plates,” Fibre Science and Technology, 8(2), pp. 81-89, 1975.
74. Khdeir, A. A., Librescu, L., and Reddy, J. N., “Analytical Solution of a Refined Shear Deformation Theory for Rectangular Composite Plates,” International Journal of Solids and Structures, 23(10), pp. 1447-1463, 1987.
75. Khdeir, A. A. and Reddy, J. N., “Dynamic Response of Antisymmetric Angle-Ply Laminated Plates Subjected to Arbitrary Loading,” Journal of Sound and Vibration, 126(3), pp. 437-445, 1988.
76. Khdeir, A. A. and Librescu, L., “Analysis of Symmetric Cross-Ply Laminated Elastic Plates Using a Higher-Order Theory: Part I-Stress and Displacement,” Composite Structures, 9, pp. 189-213, 1988.
77. Khdeir, A. A. and Librescu, L, “Analysis of Symmetric Cross-Ply Laminated Elastic Plates Using a Higher-Order Theory: Part II-Buckling and Free Vibration,” Composite Structures, 9, pp. 259-277, 1988.
78. Khdeir, A. A., “Free Vibration and Buckling of Symmetric Cross-Ply Laminated Plates by an Exact Method,” Journal of Sound and Vibration, 126(3), pp. 447-461, 1988.
79. Khdeir, A. A., “Free Vibration of Antisymmetric Angle-Ply Laminated Plates Including Various Boundary Conditions,” Journal of Sound and Vibration, 122(2), pp. 377-388, 1988.
80. Khdeir, A. A., “Free Vibration and Buckling of Unsymmetric Cross-Ply Laminated Plates Using a Refined Theory,” Journal of Sound and Vibration, 128(3), pp. 377-395, 1989.
81. Khdeir, A. A. and Reddy, J. N., “Exact Solutions for the Transient Response of Symmetric Cross-Ply Laminates Using a Higher-Order Plate Theory,” Composite Science and Technology, 34, pp. 205-224, 1989.
82. Khdeir, A. A., “An Exact Approach to the Elastic State of Stress of Shear Deformable Antisymmetric Angle-Ply Laminated Plates,” Composite Structures, 11, pp. 245-258, 1989.
83. Khdeir, A. A., “Comparison Between Shear Deformable and Kirchhoff Theories for Bending, Buckling and Vibration of Antisymmetric Angle-ply Laminated Plates,” Composite Structures, 13, pp. 159-172, 1989.
84. Khdeir, A. A., “Stability of Antisymmetrtic Angle-Ply Laminated Plates,” ASCE Journal of Engineering Mechanics, 115, pp. 952-962, 1989.
85. Khdeir, A. A. and Reddy, J. N., “Analytical Solutions of Refined Plate Theories of Cross-Ply Composite Laminates,” Journal of Pressure Vessel Technology, 113(4), pp. 570-578, 1991.
86. Khdeir, A. A. and Reddy, J. N., “Thermal Stresses and Deflections of Cross-Ply Laminated Plates Using Refined Plate Theories,” Journal of Thermal Stresses, 14(4), pp. 419-438, 1991.
87. Garrett, K. W. and Bailey, J. E., “Multiple Transverse Fracture in 90° Cross-Ply Laminates of Glass Fibre-Reinforced Polyester,” Journal of Materials Science, 12, 157-168, 1977.
88. Highsmith, A. L. and Reifsnider, K. L., “Stiffness Reduction Mechanisms in Composite Laminates,” Damage in Composite Materials, Reifsnider, K. L. (ed.), American Society for Testing and Materials, ASTM STP 775, 103-117, 1982.
89. Talug, A., “Analysis of Stress Fields in Composite Laminates with Interior Cracks,” Ph.D. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, 1978.
90. Fukunaga, H., Chou, T. W., Peters, P. W. M., and Schulte, K., “Probabilistic Failure Strength Analyses of Graphite/Epoxy Cross-Ply Laminates,” Journal of Composite Materials, 18, 339-358, 1984.
91. Flaggs, D. L., “Prediction of Tensile Matrix Failure in Composite Laminates,” Journal of Composite Materials, 19, 29-50, 1985.
92. Laws, N. and Dvorak, G. J., “Progressive Transverse Cracking in Composite Laminates,” Journal of Composite Materials, 22, 900-916, 1988.
93. Hashin, Z., “Analysis of Cracked Laminates: A Variational Approach,” Mechanics of Materials, 4, 121-136, 1985.
94. Han, Y. M., Hahn, H. T., and Croman, R. B., “A Simplified Analysis of Transverse Pty Cracking in Cross-Ply Laminates,” Composites Science and Technology, 31, 165-177, 1988.
95. Lim, S. G. and Hong, C. S., “Prediction of Transverse Cracking and Stiffness Reduction in Cross-Ply Laminated Composites,” Journal of Composite Materials, 23, 695-713, 1989.
96. Kim, Y. M. and Hong, C. S., “Progressive Failure Model for the Analysis of Laminated Composites Based on Finite Element Approach,” Journal of Reinforced Plastics and Composites, 11, 1078-1091,1992.
97. n]s. Composite Laminates. Part 2: Development of Transverse Ply Cracks,” Composites, 23 (5), 299-304, 1992.
98. Lee, J. H. and Hong, C. S, “Refined Two-Dimensional Analysis of Cross-Ply Laminates with Transverse Cracks Based on the Assumed Crack Opening Displacement,” Composites Science and Technology, 46, 157-166, 1992.
99. Guild, F. J., Ogin, S. L., and Smith, P. A., “Modelling of 90° Ply Cracking Cross-Ply Laminates, Including Three-Dimensional Effects,” Journal of Composite Materials, 27(7), 646-667, 1993.
100. Nairn, J. A., “The Strain Energy Release Rate of Composite Microcracking: A Variational Approach,” Journal of Composite Materials, 23, 1106-1129, 1989.
101. Herakovich, C. T, Aboudi, J., Lee, S. W., and Strauss, E. A., “Damage in Composite Laminates: Effects of Transverse Cracks,” Mechanics of Materials 7, 91-107, 1988.
102. Varna, J. and Berglund, L. A., “Multiple Transverse Cracking and Stiffness Reduction in Cross-Ply Laminates,” Journal of Composites Technology and Research, 13(2), 99-106, 1991.
103. Varna, J. and Berglund, L. A., “A Model for Prediction of the Transverse Cracking Strain in Cross-Ply Laminates,” Journal of Reinforced Plastics and Composites, 11, 708-728, 1992.
104. McCartney, L. N., “Theory of Stress Transfer in a 0° - 90° - 0° Cross-Ply Laminate Containing a Parallel Array of Transverse Cracks,” Journal of Mechanics and Physics of Solids, 40(1), 27-68, 1992.
105. Gamby, D. and Rebiére, J. L., “A Two-Dimensional Analysis of Multiple Matrix Cracking in a Laminated Composite Close to its Characteristic Damage State,” Composite Structures, 25, 325-337, 1993.
106. Talreja, R., “Stiffness Properties of Composite Laminates with Matrix Cracking and Interior Delamination,” Engineering Fracture Mechanics, 25(5,6), 751-762, 1986.
107. Allen, D. H., Harris, C. E., and Groves, S. E., “A Thermomechanical Constitutive Theory for Elastic Composites with Distributed Damage - I. Theoretical Development,” Int. J. Solids and Structures, 23(9), 1301-1318, 1987.
108. Allen, D. H., Harris, C. E., and Groves, S. E., “A Thermomechanical Constitutive Theory for Elastic Composites with Distributed Damage - II. Numerical Results,” Int. J. Solids and Structures, 23(9), 1319-1338, 1987.
109. Lee, J. W., Allen, D. H, and Harris, C. E., “Internal State Variable Approach for Predicting Stiffness Reductions in Fibrous Laminated Composites with Matrix Cracks,” Journal of Composite Materials, 23, 1273-1291, 1989.
110. Tay, T. E. and Lim, E.H., “Analysis of Stiffness Loss in Cross-Ply Composite Laminates,” Composite Structures, 25, 419-425, 1993.
111. Wu, S. and Chudnovsky, A., “The Effective Elastic Properties of a Linear Elastic Solid with Microcracks,” Engineering Fracture Mechanics, 37(3), 653-659, 1990.
112. Gudmundson, P. and Östlund, S., “First-Order Analysis of Stiffness Reduction Due to Matrix Cracking,” Journal of Composite Materials, 26(7), 1009-1030, 1992.
113. Yuan, F. G. and Selek, M. C, “Transverse Cracking and Stiffness Reduction in Composite Laminates,” Journal of Reinforced Plastics and Composites, 12, 987-1015, 1993.
114. Kachanov, M., “Elastic Solids with Many Cracks and Related Problems,” Advances in Applied Mechanics, J. W. Hutchinson and T. Y. Wu (eds.), 30, 260-445, 1993.
115. Dvorak, G. J., Laws, N., and Hejazi, M., “Analysis of Progressive Matrix Cracking in Composite Laminates. I. Thermoelastic Properties of a Ply with Cracks,” Journal of Composite Materials, 19, 216-234, 1985.
116. Aboudi, J., “Stiffness Reduction of Cracked Solids,” Engineering Fracture Mechanics, 26(5), 637-650, 1987.
117. Sumarac, D. and Krajcinovic, D., “A Self-Consistent Model for Microcrack-Weakened Solids,” Mechanics of Materials 6, 39-52,1987.
118. Bai, Jia-Min, “Stiffness Reduction Analysis of Cracked Cross-Ply Laminates by Using Integral Equation Approach,” Engineering Fracture Mechanics, 34(1), 245-251, 1989.
119. Aveston, J. and Kelly, A., “Theory of Multiple Fracture of Fibrous Composites,” Journal of Materials Science, 8, 352-362, 1973.
120. Brillaud, J. and El Mahi, A., “Numerical Simulation of the Influence of Stacking Sequence on Transverse Ply Cracking in Composite Laminates,” Composite Structures, 17, 23-35, 1991.
121. Caslini, M., Zanotti, C. and O’Brien, T. K., “Fracture Mechanics of Matrix Cracking and Delamination in Glass/Epoxy Laminates,” NASA Technical Memorandum 89007, AVSCOM Technical Report 86-B-3, 1986.
122. Ogin, S. L., Smith, P. A., Beaumont, P. W. R., “Matrix Cracking and Stiffness Reduction During the Fatigue of a (0/90)s, GFRP Laminate,” Composite Science and Technology, 22,23-31,1985.
123. Wang, A. S. D., Chou, P. C, and Lei, S. C, “A Stochastic Model for the Growth of Matrix Cracks in Composite Laminates,” Journal of Composite Materials, 18, 239-254, 1984.
124. Praveen, G. N. and Reddy, J. N.,“Cross-Ply Laminates with a Periodic Array of Transverse Matrix Cracks. 1. Stress Transfer and Stiffness Reduction,” Texas A&M University, College Station, 1995.
125. Praveen, G. N. and Reddy, J. N.,“Cross-Ply Laminates with a Periodic Array of Transverse Matrix Cracks. 2. Crack Opening Profiles and Stress Transfer at CDS,” Texas A&M University, College Station, 1995.
126. O’Brien, T. K., “Characterization of Delamination Onset and Growth in a Composite Laminate,” Damage in Composite Materials, K. L. Reifsnider (ed.), STP 775, American Society for Testing Materials, Philadelphia, 140-167, 1982.
127. O’Brien, T. K., “Analysis of Local Dominations and Their Influence on Composite Laminate Behavior,” Delamination and Debonding of Materials, STP 877, W. S. Johnson (ed.), American Society for Testing Materials, Philadelphia, 282-297, 1985.
128. O’Brien, T. K., “The Effect of Delamination on the Tensile Strength of Unnotched, Quasi-Isotropic, Graphite/Epoxy Laminates,” Proceedings of the SESA/JSME Joint Conference on Experimental Mechanics, Part I, Honolulu, Hawaii, (SESA, Brookfield Center, CT), 236-243, 1982.
129. Rybicki, E. F., Schmueser, D. W., and Fox, J., “An Energy Release Rate Approach for Stable Crack Growth in the Free-Edge Delamination Problem,” Journal of Composite Materials, 11, 470-487, 1977.
130. Wang, A. S. D., and Crossman, F. W., “Initiation and Growth of Transverse Cracks and Edge Delamination in Composite Laminates, Parts 1 and 2,” Journal of Composite Materials, Supplemental Volume, 71-106, 1980.
131. O’Brien, T.K., “Mixed-Mode Strain-Energy Release Rate Effects on Edge Delamination of Composites,” Effects of Defects in Composite Materials, ASTM STP 836, American Society for Testing and Materials, 125-142, 1984.
132. Whitcomb, J. D. and Raju, I. S., “Analysis of Interlaminar Stresses in Thick Composite Laminates with and without Edge Delamination,” Delamination and Debonding of Materials, ASTM STP 876, W. S. Johnson (ed.), American Society for Testing and Materials, Philadelphia, 69-94, 1985.
133. Chan, W. S. et al., “Delamination Control of Composite Rotor Hubs,” Journal of the American Helicopter Society, 60-69, 1986.
134. Raju, I. S., Crews, J. H., and Aminpour, M. A., “Convergence of Strain Energy Release Rate Components for Edge-Delaminated Composite Laminates,” NASA Technical Memorandum 86135, 1987.
135. O’Brien, T. K. et al, “Comparisons of Various Configurations of the Edge Delamination Test for Interlaminar Fracture Toughness,” Toughened Composites, ASTM STP 937, N. J. Johnston (ed.), American Society for Testing and Materials, Philadelphia, 199-221, 1987.
136. Salpekar, S. A., and O’Brien, T. K., “Combined Effect of Matrix Cracking and Stress-Free Edge on Delamination,” NASA Technical Memorandum 102591, March 1990.
137. Robbins, D. H. and Reddy, J. N., “The Effects of Kinematic Assumptions on Computed Strain Energy Release Rates for Delaminated Composite Plates,” Mathematical Modelling and Scientific Computing, 1 (1,2), 50-66, 1993.
138. Barbero, E. J. and Reddy, J. N., “Modeling of Delamination in Composite Laminates Using a Layer-Wise Plate Theory,” Int. J. Solids and Structures, 28(3), 373-388, 1991.
139. Robbins, D. H. and Reddy, J. N., “Modeling of Thick Composites Using a Layerwise Laminate Theory,” Int. J. Numer. Meth. Engng., 36, 655-677, 1993.
140. Whitney, J. M., Browning, C. E., and Hoogsteden, W., “A Double Cantilever Beam Test for Characterizing Mode I Delamination of Composite Materials,” Journal of Reinforced Plastics and Composites, 1, 297-313, 1982.
141. Crews, J. H., Jr., Shivakumar, K. N., and Raju, I. S., “Factors Influencing Elastic Stresses in Double Cantilever Beam Specimens,” NASA Technical Memorandum 89033, 1987.
142. Martin, R. M., “Effect of Initial Delamination on GIc and GI Values from Glass/Epoxy Double Cantilever Beam Tests,” Proceedings of the American Society for Composites, Third Technical Conference, Seattle, Washington, Sept. 25-29, 1988
143. Raju, I. S., Shivakumar, K. N., and Crews, J. H., “Three-Dimensional Elastic Analysis of a Composite Double Cantilever Beam Specimen,” AIAA Journal, 26 (12), 1493-1498, 1988.
144. Davidson, B. D., and Schapery, R. A., “Effect of Finite Width on Deflection and Energy Release Rate of an Orthotropic Double Cantilever Beam Specimen,” Journal of Composite Materials, 22, 640-656, 1988.
145. Crews, J. H., Jr., Shivakumar, K. N., and Raju, I. S., “Effects of Anticlastic Curvature on G Distributions for DCB Specimens,” AIAA/A SME/A SM E/A SC E/A HS/A SC Structures, Structural Dynamics and Materials Conference, 30th, Mobile, Alabama, April 3-5, 1989.
146. Krishna Kumar, R. and Reddy, J. N., “Stress Distributions During Fiber Pull Out,” Journal of Applied Mechanics, in press.
147. Kim, J. K. and Mai, Y. W., “High Strength, High Fracture Toughness Fiber Composites with Interface Control - A Review,” Composite Sei. Tech., 41, 333-378, 1991.
148. Suzuki, T. et al., “Fiber Pullout Processes and Mechanisms of Carbon Fiber Reinforced Silicon Nitride Ceramic Composite,” J. Mat. Res., 7(10), 2809-2875, 1992.
149. Budiansky, B. et al., “Matrix Fracture in Fiber-Reinforced Ceramics,” J. Mech. Phys. Solids, Vol. 34, 1986, 167-189.
150. Desarmot, G. and Favre, J. P., “Advances in Pull-Out Testing and Data Analysis,” Compos. Sei. Tech., 42, 151-187, 1991.
151. Khanna, K. S., “Effect of Reinforcement and Fiber-Matrix Interface on Dynamic Fracturing of Fiber Reinforced Composite Materials,” Ph.D. Thesis, University of Rhode Island, Kingston, RI, 1992.
152. Atkinson, C. et al., “The Rod Pull Out Problem, Theory and Experiment,” J. Mech. Phys. Solids, 30(3), 97-120, 1982
153. Bowling, J. and Groves, G. W., “The Debonding and Pull-Out of Ductile Wires from a Brittle Matrix,” J. Mat. Sei., 14, 431-442, 1979.
154. Favre, J. P. and Menenne, M. C, “Characterization of Fiber/Resin Bonding in Composites Using a Pull-Out Test,” Int. J. Adhesion and Adhesives, 1, 311-316, 1981.
155. Hutchinson, J. W. and Jensen, H. M., “Models of Fiber Debonding and Pull Out in Brittle Composites with Friction,” Mech. Mater., 9, 139-163, 1990.
156. Aboudi, J., “Micromechanical Analysis of Fibrous Composites with Coulomb Frictional Slippage Between the Phases,” Mech. Mater., 8, 103-115, 1989.
157. Gao, Y. C. et al., “Fracture of Fiber Reinforced Materials,” J. Appl. Math and Phys. (ZAMP), 39, 550-572, 1988.
158. Dollar, A. and Steif, P. S., “Load Transfer in Composites with a Coulomb Friction Interface,” Int. J. Solids Struct., 24(8), 789-803, 1988.
159. Fruend, L. B., “The Axial Force Needed to Slide a Circular Fiber Along a Hole in an Elastic Material and Implications for Fiber Pull-Out,” Eur. J. Mech. Solids, 11, 1-19, 1992.
160. Povirk, G. L., and Needleman, A., “Finite Element Simulations of Fiber Pull-Out,” Trans. AS ME, J. Eng. Mater. Tech., 115, 286-291, 1993.
161. Ballarami, R. and Ahmed, S.,“Finite Element Modeling of Frictionally Restrained Composite Interfaces,” NASA Contract report 182281, 1989.
162. Marotzke, “The Elastic Stress Field Arising in the Single Fiber Pull-Out Test,” Comp. Sei. Tech., 50, 393-103, 1994.
163. Faber, K. T. et al., “Frictional Stress Evaluation Along the Fiber-Matrix Interface in CMC’s,” J. Amer. Ceram. Soc., 69(9), 208-209, 1986.
164. Hsueh, C. H., “Interfacial Debonding and Fiber Pull-Out Stresses of Fiber Reinforced Composites, X: with an Elastic Interfacial Coating”, Mat. Sci. Engng., 105, 189-195, 1993.
165. Reddy, J. N. and Pandey, A. K., “A First-Ply Failure Analysis of Composite Laminates,” Computers and Structures, 25 (3), 371-93, 1987.
166. Turvey, G. J. and Osman, M. Y., “Exact and Approximate Linear and Nonlinear Initial Failure Analysis of Laminate Mindlin Plates in Flexure,” Composite Structures 5, I. H. Marshall (ed.), Elsevier Applied Science, London, Chapter 4, 133-171, 1989.
167. Reddy, Y. S. N. and Reddy, J. N., “Linear and Non-Linear Failure Analysis of Composite Laminates with Transverse Shear,” Composites Science and Technology, 44, pp. 227-255 (1992).
168. Tsai, S. W., “A Survey of Macroscopic Failure Criteria for Composite Materials,” Technical Report, AFWAL-TR-84-4025.
169. Soni, S. R, “A Comparative Study of Failure Envelopes in Composite Laminates,” Journal of Reinforced Plastics and Composites, 2 (1), 34-12, 1983.
170. Hashin, Z., “Failure Criteria for Unidirectional Composites,” Journal of Applied Mechanics, 47, pp. 329-334 (1980).
171. Petit, P. H. and Waddoups, M. E., “A Method of Predicting the Nonlinear Behavior of Laminated Composites,” Journal of Composite Materials, 3 (Feb. 1969).
172. Sandhu, R. S., Sendeckyi, G. P., and Gallo, R. L., “Modeling of the Failure Process in Notched Laminates,” in Mechanics of Composite Materials Recent Advances, Proceedings of the IUTAM Symposium held at Virginia Polytechnic Institute and State University, August 16-19, 1982, Z. Hashin and C. T. Herakovich (eds.), Pergamon Press, Elmsford, NY, 179-189, 1982.
173. Tsai, S. W. and Azzi, V. D., “Strength of Laminated Composite Materials,” AIAA Journal, 4 (2), pp. 296-301 (Feb. 1966).
174. Chang, F. K. and Chang, K. Y., “A Progressive Damage Model for Laminated Composites Containing Stress Concentrations,” Journal of Composite Materials, 21, 1987.
175. Chang, F. K., Lessard, L., and Tang, J. M., “Compression Response of Laminated Composites Containing an Open Hole,” SAMPE Quarterly 19, 1988.
176. Hahn, H. T. and Tsai, S. W., “Nonlinear Elastic Behavior of Unidirectional Composite Laminates,” Journal of Composite Materials, 7, 1973.
177. Yamada, S. E. and Sun, C. T., “Failure Strength of Nonlinearly Elastic Composite Laminates Containing a Pin Loaded Hole,” Journal of Composite Materials, 18, 1984.
178. Tan, S. C, “A Progressive Failure Model of Composite Laminates Containing Openings,” Journal of Composite Materials, 25, 556-577, 1991.
179. Starnes, J. H., Jr. and Rouse, M., “Postbuckling and Failure Characteristics of Selected Flat Rectangular Graphite-Epoxy Plates Loaded in Compression,” AIAA Paper No. 81-0543 (1981).
180. Engelstad, S. P., Reddy, J. N., and Knight, N. F., Jr., “Postbuckling Response and Failure Prediction of Graphite-Epoxy Plates Loaded in Compression,” ATA A Journal, 30(8), 2106-2113, 1992.
181. Ochoa, O. O. and Reddy, J. N., Finite Element Analysis of Composite Laminates, Kluwer Academic Publishers, The Netherlands, 1992.
182. Nuismer, R. J. and Tan, S. C, “Constitutive Relations of a Cracked Composite Lamina,” J. Comp. Mater., 22, 306-321, 1988.
183. Reddy, J. N., “A Simple Higher-Order Theory of Laminated Composite Plates”, J Appi Mech., 51, 745, 1984.
184. Miravete, A., “The Finite Element Method Applied to Composites,” Esribano, Zaragoza, Spain, 1987.
185. Miravete, A., “Analysis del Comportamiento Resistente de Laminados de Poliester Reforzado y su Aplicación a los Medios de Transporte,” Ph.D. Thesis, University of Zaragoza, Spain, 1984.
186. Miravete, A., “Caracterisation et mise au Point d’un Element Fini de Grande Precisili Applicable a des Lamines de Polyester Renforce avec Fibres de Verre,” Composites, 4, pp. 20, 1986.
187. Miravete, A., “A Simple Finite Element Formulation for 3-Dimensional Laminated Composite Plates,” Proceedings of the Fifth International Conference on Composite Structures (ICCS/5), I. H. Marshall (ed.), Vol. 1, pp. 405-417, 1989.
188. Miravete, A., Piedrafita, G., Baselga, S., Bravo, P., “Failure Analysis on Variable Thickness Composite Beams Under 4-Point Test Bending,” Proceedings of the Eighth International Conference on Composite Materials (ICCM/8), 36-Q-l to 36-Q-3, Hawaii, 1991.
189. Miravete, A., “Optimization of Composite Structures,” AFWAL/MLBM Technical Report, Dayton, OH, 1989.
190. Miravete, A. and Kim, R., Failure Modes on Variable Thickness Composite Structures, SAMPE Series, Vol. 35, Part 2, pp. 1647-1656, Anaheim, CA, 1990.
191. Miravete, A., Kim, R., Peidrafita, G., Baselga, S., “Through Thickness Stress Distribution in Tapered Composite Beams,” Proceedings EC CM4, pp. 871-876, Stuttgart, 1990.
192. Reddy, J. N. and Rasmussen, M. L., Advanced Engineering Analysis, John Wiley & Sons, New York, 1982; reprinted by Krieger, Melbourne, FL, 1990.
193. Reddy, J. N., Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York, 1984.
194. Malvern, L. E., Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Englewood Cliffs, NJ, 1969.
195. Reddy, J. N., An Introduction to the Finite Element Method, Second Edition, McGraw-Hill, New York, 1993.
196. Zienkiewicz, O. C. and Taylor, R. L., The Finite Element Method, McGraw-Hill, New York, 1989.
197. Hull, D., “Energy Absorbing Composite Structures, Scientific and Technical Review,” University of Wales, No. 3, pp. 23-30, 1988.
198. Whirley, R. G. and Hallquist J. O., “DYNA3D: Non-Linear, Explicit, Three-Dimensional Finite Element Code for Solid and Structural Mechanics-User Manual,” Lawrence Livermore National Laboratory, Livermore, CA, 1991.
199. ABAQUS, Version 4.9, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI.
200. Thorton P. H. and Jeryan R. A., “Crash Energy Management in Composite Automotive Structures,” Int. Journal Impact Engineering, 7(2), 167-180, 1988.
201. Farley, G. L. and Jones, R. M., “Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes,” Journal of Composite Materials, 26(1), 1992.
202. Jones, R. M., Mechanics of Composite Materials, Scripta Book Co., Washington, DC, 1975.
203. Zienkiewicz, O. C, El método de los elementos finitos, Ed. Reverté, 1980.
204. Tsai S. W., Theory of Composite Desiqn, Think Composites, Dayton, OH, 1992.
205. Liu Xia-Shi, “Finite Element Analysis for Large Composite Structure,” Proceedings of Fourth International Conference on Composite Structures (ICCS-4), I. H. Marshall (ed.), Applied Science Publishers, New York, NY, 1987.
206. Thornton, P. H., “Energy Absorption in Composite Structures,” J. Compos. Mater, 13, 247-262, 1979.
207. Kirsch, P. A. and Jahnle, H. A., “Energy Absorption of Glass-Polyester Structures,” SAE Paper 810233, 1981.
208. Thornton, P. H. and Edwards, P. J., “Energy Absorption in Composite Tubes,” J. Compos. Mater., 16, 521-545, 1982.
209. Hull, D., “Energy Absorption of Composite Materials under Crash Conditions,” Progress in Science and Engineering of Composites, T. Hayashi, K. Kawata and S. Umekawa (eds.), ICCM-IV, 1, Tokyo, 861-870, 1982.
210. Farley, G. L., “Energy Absorption of Composite Materials,” J. Compos. Mater., 17 267-279, 1983.
211. Kindervater, C. M., “Energy Absorbing Qualities of Fiber Reinforced Plastic Tubes,” National Specialists Meeting of Composite Structures of the American Helicopter Society, 1983.
212. Hull, D., “Axial Crushing of Fiber Reinforced Composite Tubes,” Structural Crashworthiness, N. Jones and T. Wierzbicki (eds.), Butterworth h Co. Ltd. (UK), London, 118-135, 1983.
213. Snowdon, P. and Hull, D., “Energy Absorption of SMC Under Crash Conditions,” Fiber Reinforced Composites Conference, Plastics and Rubber Institute, pp. 5.1-5.10, 1984.
214. Berry, J. and Hull, D., “Effect of Speed on Progressive Crushing of Epoxy-Glass Cloth Tubes,” Mechanical Properties of Materials at High Rates of Strain, J. Harding (ed.,) Inst. Phys. Conf. Series No. 70, New York, 463-470, 1984.
215. Keal, R., “Post Failure Energy Absorbing Mechanisms of Filament Wound Composite Tubes,” Ph.D. Thesis, University of Liverpool, Liverpool, UK, 1984.
216. Berry, J. P., “Energy Absorption and Failure Mechanisms of Axially Crushed GRP Tubes,” Ph.D. Thesis, University of Liverpool, Liverpool, UK, 1984.
217. Thornton, P. H., “Effect of Trigger Geometry on Energy Absorption in Composite Tubes,” Proc. of the Fifth Int. Conf. Composite Materials (ICCM-V), W.C. Harrigan, S. Strufe, and A. K Dhingra (eds.); Metallurgical Society, Warrendale, PA, pp. 1183-1199, 1985.
218. Thornton, P. H., “The Crush Behavior of Glass Fiber Reinforced Plastic Sections,” Composites Science Technology, 27, 199-224, 1986.
219. Farley, G. L., “Effect of Fiber and Matrix Maximum Strain on the Energy Absorption of Composite Materials,” J. Comp. Mat, 20, 322-334, 1986.
220. Bravo, P., Larrode, E., and Miravete, A. “Crash Absorbing Elements for Automotive Applications,” Proceedings ICCM/9, Vol. 5, pp. 374-385, A. Miravete (ed.), Madrid, 1993.
221. Bravo, P., Larrode, E., Miravete, A., and Tamparillas, S. “Crash Absorbing Elements for Automotive Applications,” International Journal of Composite Structures, to appear.
222. Bravo, P. “Anáslisi y diseño de absorbedores de energía con materiales compuestos y su aplicación a los medios de transporte,” Ph.D. Thesis, University of Zaragoza, Spain, 1994.
223. Larrode, E., Miravete, A., Bravo, P., and Baselga, S., “Design and Analysis of Crash Absorber Made of Advanced Materials: Automotive Applications,” Proceedings of ISATA-27, Aachen, Germany, 1994, pp. 199-206.
224. Bathe, K.-L., Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1982.
225. Cook, R. D., Malkus, D. S., and Plesha, M. E., Concepts and Applications of Frnite Element Analysis, Third Edition, John Wiley & Sons, New York, 1989.
226. Crisfield, M. A., Non-Linear Finite Element Analysis of Solids and Structures, John Wiley & Sons, Chichester, U.K., 1991.
227. Reddy, J. N., An Introduction to the Finite Element Method, Second Edition, McGraw-Hill, New York, 1993.
228. Zienkiewicz, O. C. and Taylor, R. L., The Finite Element Method, McGraw-Hill, New York, 1989.
229. ABAQUS, version 4.9, Hibbitt, Karlsson and Sorensen, Inc.
230. Mondkar D.P. and Powell G.H., “Large Capacity Equation Solver for Structural Analysis,” Computers and Structures, 4, 699-728, 1974.
231. Irons, B. and Ahmad, S., Techniques of Finite Elements, Ellis Horwood Ltd., Chichester, England, 1980
232. Kim J. Y. and Hong C. S, “Three-Dimensional Finite Element Analysis of Interlaminar Stresses in Thick Composite Materials,” Computers & Structures, 40(6), 1395-1404, 1991.
233. Liu Xia-shi, “Finite Element Analysis for Large Composite Structure,” Proceedings of ICCS IV, Paisley, Scotland, 1987.
234. Larrodé, D. “Análisis de grandes estructuras realizadas en materiales compuestos por medio de técnicas de elementos finitos y de substructuración,” Ph.D., University of Zaragoza, Spain, 1994.
235. Larrode, E., Miravetef, A., and Alba, J. J., “Analysis of Composite Structures Using Substructure Techniques,” Proceedings ICCM/9, Vol. 3, pp. 169-182, A. Miravete (ed.), Madrid, 1993.
236. Larrode, E. and Miravete, A., “A Finite Element Analysis of a Bus Structure using Substructure Techniques,” Internationa Journal of Composite Structures, to appear.
237. Larrode, E., Miravete, A., and Ullod, J., “Análisis mediante elementos finitos utilizando la técnica de las subestructureas de una estructura de autobús,” Proceedings del I Congreso Iberoamericano de Ingeniería Mecánica, Madrid, 1993, Vol. 4, pp. 73-82.
238. ABAQUS, Version 4.9, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI.
239. Jones, R. M., Mechanics of Composite Materials, Scripta Book Co., Washington, D.C., 1975.
240. Reddy, J. N., Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York, 1984.
241. Reddy, J. N., Mechanics of Composite Materials: Theory and Analysis, John Wiley & Sons, New York, 1996.
242. Tsai S. W., Theory of Composite Design, Think Composites, Dayton, OH, 1992.
243. DAC User’s Manual, Department of Mechanical Engineering, University of Zaragoza (C/Maria de Luna, 3, 50015, Zaragoza), Spain, 1991.
244. Larrode, E., Casamayor, M. J., Miravete, A., and Ullod, J., “Design and Optimisation of a Full Composite Isotherm Structure,” International Journal of Composite Structures, London, UK.
245. Larrode, E., Miravete, A., and Casamayor, M. J., “Optimización de un semirremolque isotermo,” Proceedings del I Congreso Iberoamericano de Ingeniería Mecánica, Madrid, 1993, Vol 4, pp. 49-63.
246. Larrode, E., Miravete, A, Castejón, and L., Diseño, “Optimización y Cálculo de uñ elemento rodante en materiales compuestos para su aplicación al tren de alta velocidad español,” Proceedings del I Congreso Iberoamericano de Ingeniería Mecánica, Madrid, 1993, Vol. 4, pp. 65-74.