Air pollution control technology handbook

Air Pollution Control Technology Handbook

Volumn , Issue , 2016, Pages 1-386

  Schnelle, Karl B ^a   Brown, Charles A ^b  

^a VANDERBILT UNIVERSITY   (United States)

^b VECO Engineering Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR POLLUTION; AIR POLLUTION CONTROL EQUIPMENT; COST EFFECTIVENESS; COST ENGINEERING; COST ESTIMATING; REVIEWS;

AIR POLLUTION CONTROL TECHNOLOGY; ALTERNATIVE DESIGNS; COST EFFECTIVE DESIGN; COST ESTIMATIONS; COST STUDY; PRACTICING ENGINEERS; SCIENCE BACKGROUND;

AIR POLLUTION CONTROL;

EID: 85050903327     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (170)

1. Boubel, R. W., Fox, D. L., Turner, D. B., and Stern, A. C., Fundamentals of Air Pollution, 3rd ed., Academic Press, San Diego, 1994.
2. Schrenk, H. H., Heiman, H., Clayton, G. D., Gafafer, W. M., and Wexler, H., Air Pollution in Donora, PA , Public Health Bulletin No. 306, Federal Security Agency, Public Health Service, Division of Industrial Hygiene, Washington, D.C., 1949.
3. Seinfeld, J. H., Air Pollution , McGraw-Hill Book Co., New York, 1975.
4. Goldsmith, J. R., Effects of air pollution on human health, in Air Pollution, Stern,A.C., Ed., Academic Press, New York, 1977.
5. Williamson, S., Fundamentals of Air Pollution , Addison-Wesley, Reading, MA, 1973.
6. Chambers, A., Fanning the flames, Power Eng., 104(1), 16, 2000.
7. Boubel, R. W., Fox, D. L., Turner, D. B., and Stern, A. C., Fundamentals of Air Pollution, 3rd ed., Academic Press, San Diego, 1994, 395.
8. General Overview of the CAAA, www.epa.gov/ttn/oarpg/gen/overview.txt, EPA OAQPS Technology Transfer Network, 1993.
9. Coffin, D. L., Blommer, E. J., Gardner, D. E., and Holzman, R. S., Effects of air pollution on alteration of susceptibility to pulmonary infection, in Proc. Third Ann. Conf. Atmospheric Contaminants in Confined Spaces, Aerospace Medical Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, 1968, 71.
10. Whitman, EPA v. American Trucking Association, Inc., U.S. Supreme Court, 99-1257.
11. National emission standards for hazardous air pollutants: revision of source category list and schedule for standards under Section 112 of the Clean Air Act, Fed. Register, 64, (222), Nov. 18, 1999.
12. Sierra Club v. Browner, D.C. District Court, 93-0124.
13. New Source Review Workshop Manual, U.S. Environmental Protection Agency, Draft, October 1990.
14. Leonard, R. L., Air Quality Permitting, Lewis Publishers, Boca Raton, 1997, 68.
15. Evans, B. and Weiss, K., Summary of progress on EPA's NSR reform initiative, EM, 27, June 2000.
16. Turner, D. B., A Workbook of Atmospheric Dispersion Estimates , 2nd ed., Lewis Publishers, CRC Press, Inc., Boca Raton, 1994.
17. Schnelle, Jr. K. B. and Dey, P. R., Atmospheric Dispersion Modeling Compliance Guide , McGraw-Hill, New York, 1999.
18. Code of Federal Regulations, 40 CFR Part 60, Appendix A, Office of the Federal Register, National Archives and Records Administration, Washington, D.C., July 1, 1993.
19. Lodge, J. P., Jr., Ed., Methods of Air Sampling and Analysis, Interscience Committee of A&WMA, ACS, AIChE, APWA, ASME, AOAC, HPS, and ISA; Lewis Publishers Inc., Chelsea, MI, 1989.
20. Glasastone, S., Laidler, K. J., and Eyring, H., The Theory of Rate Processes, McGraw- Hill Book Co., New York, 1941.
21. Vatavuk, W. M., Escalation Indexes for Air Pollution Control Costs , U.S. Environmental Protection Agency, EPA-452/R-95-006, Research Triangle Park, NC, 1995.
22. Humphreys, K. K. and Katell, S., Basic Cost Engineering , Marcel Dekker, New York, 1981, 108.
23. Peters, M. S. and Timmerhaus, K. D., Plant Design and Economics for Chemical Engineers, 3 rd ed., McGraw-Hill, New York, 1980, 183.
24. Perry, R. H., Green, D. W, and Maloney, J. O., Perry's Chemical Engineers' Handbook, 7 th ed., McGraw-Hill, New York, 1997, 9-64.
25. OAQPS Control Cost Manual , 5th ed., U.S. Environmental Protection Agency, EPA 453/B-96-001, Research Triangle Park, NC, 1996.
26. Process Plant Construction Estimating Standards , Richardson Engineering Services, Inc., San Marcos, CA, 2001.
27. Vatavuk, W. M., Estimating Costs of Air Pollution Control , Lewis Publishers, Chelsea, MI, 1990.
28. Keeth, R. et al., Economic Evaluation of FGD Systems, GS-7193, Vol. 1 and 2, Electric Power Research Institute, Palo Alto, CA, 1991.
29. Keeth, R. J., Ireland, P. A., and Radcliffe, P. T., Economic evaluations of 28 FGD processes, presented at 1991 EPRI/EPA/DOE SO 2 Control Symp., Washington, D.C., Dec. 3-6, 1991.
30. Seider, W. D., Seader, J. D., and Lewin, D. L., Process Design Principles - Synthesis, Analysis, and Evaluation , John Wiley & Sons, Inc., New York, 1999.
31. Turton, R., Bailie, R. C., Whiting, W. B., and Shaeiwitz, J. A., Analysis, Synthesis, and Design of Chemical Processes , Prentice-Hall, Englewood Cliffs, NJ, 1998.
32. Phillips, H. W., Select the proper gas cleaning equipment, Chem. Eng. Prog., 96(9), 19, 2000.
33. Nair, C., Letters - Gas cleaning equipment, Chem. Eng. Prog., 97(1), 10, 2001.
34. Smith, J. M., Van Ness, H. C., and Abbott M. M., Introduction to Chemical Engineering Thermodynamics, 6th ed., McGraw-Hill, New York, 2001.
35. Felder, M. R. and Rousseau, R. W., Elementary Principles of Chemical Processes, 3rd ed., John Wiley & Sons Inc., New York, 2000.
36. Peters, M. S. and Timmerhaus, K. D., Plant Design and Economics for Chemical Engineers , 4th ed., McGraw-Hill, Inc., New York, 1991.
37. Guthrie, K. M., Capital cost estimating, Chem. Eng. , pp. 114, March 24, 1969.
38. Vatavuk, W. M. and Neveril, R. B., Factors for estimating capital and operating costs, Chem. Eng. , pp. 157-162, November 3, 1980.
39. U.S. EPA Handbook: Control Technologies for Hazardous Air Pollutants, EPA/625/6- 91/014, Cincinnati, OH, 1991.
40. Higbie, R., The rate of absorption of pure gas into a still liquid during short periods of exposure. Trans. A.I.Ch.E., L1, 365-389, 1935.
41. Rees, R. L., The removal of oxides of sulfur from flue gases. J. Inst. Fuel, 25, 350-357, 1953.
42. Crocker, B. B., Capture of hazardous emissions, in Proceedings, Control of Specific Toxic Pollutants, Conference, February 1979, Gainesville, FL, Air Pollution Control Assoc., Pittsburgh, PA, 1979, 414-433.
43. Crocker, B. B. and Schnelle, Jr., K. B., Air pollution control for stationary sources, in Encyclopedia of Environmental Analysis and Remediation, Meyers, R. A., Ed., John Wiley & Sons, Inc., New York, 1998, 151-213.
44. Teller, A. J., Chem. Eng. Prog., 63, 75, 1967.
45. Smith, J. M., van Ness, H. C., and Abbott, M. M., Introduction to Chemical Engineering Thermodynamics, 5th ed., McGraw-Hill Companies, Inc., New York, 2000.
46. Danckwerts, P. V., Significance of liquid film coefficients in gas absorption, Ind. Eng. Chem., 41, 1460-1467, 1951.
47. Whitman, W. G., The two film theory of gas absorption, Chem. Metal., 2(E), 146-148, 1923.
48. Strigle, R. F., Packed Tower Design and Applications, Random and Structured Packings, 2nd ed., Gulf Publishing Co., Houston, 1994.
49. Perry, R. H. and Green, D. W., Chemical Engineer's Handbook, 7th ed., McGraw- Hill Book Company, New York, 1997, section 14.
50. Sherwood, T. K., Shipley, G. H., and Holloway, F. A. L., Ind. Eng.Chem., 30, 765, 1938.
51. Colburn, A. P., Simplified calculation of diffusional processes, Ind. Eng. Chem. 33, 459-467, 1961.
52. Parkinson, G. and Ondrey, G., Packing towers, Chem. Eng., Newsfront, 39, December 1999.
53. Bravo, J. L., Rocha, J. A., and Fair, J. R., Hydrocarbon Proc., 56(3), 45, 1986.
54. Fair, J. R. and Bravo, J. L., Chem. Eng. Prog., 86(1), 19, 1990.
55. Bravo, J. L., Rocha, J. A., and Fair, J. R., I. Chem. E. Symp. Series, No. 128, A439, 1992.
56. Yaws, C., Yang, H., and Pan X., Henry's Law Constant for 362 organic compounds in water, Chem. Eng., November 1991.
57. Carroll, J. J., Use Henry's Law for multicomponent mixtures, Chem. Eng. Prog., 53, August 1992.
58. Berg, A. H., Hypersorption design: modern advancements, Chem. Eng. Prog., 47(11), 585-590, 1951.
59. Humphrey, J. L., Separation processes: playing a critical role, Chem. Eng. Prog., 91(10), 31, 1995.
60. Perry, R. H. and Green, D. W., Chemical Engineer's Handbook, 7th ed., McGraw- Hill Book Company, New York, 1997, Section 16.
61. Fair, J. R., Sorption processes or gas separation, Chem. Eng., 90-110, July 14, 1969.
62. Goldman, F. and Polyani, M., Zeitschrift für Physikalische Chemie, 132, 321, 1928.
63. Grant R. J. and Manes M., Correlation of some gas adsorption data extending to low pressures and supercritical temperatures, Ind. Eng. Chem. Fundam., 3(3), 1964.
64. Ergun, S., Chem. Eng. Prog., 48, 87-89, 1952.
65. Hougen, O. A. and Marshall, Jr., W. R., Adsorption from a fluid stream flowing through a stationary granular bed, Chem. Eng. Prog., 43(4), 197, 1947.
66. Ufrecht, R. H., Sommerfeld, J. T., and Lewis, H. C., Design of adsorption equipment in air pollution control, J.A.P.C.A., 30(42), 1348, 1980.
67. McCleod, H. O. and Campbell, J. M., Soc. Petrol. Engrs. J., 166, June 1966.
68. Leite, O. C., Safety, noise, and emissions elements round out flare guidelines, Oil Gas J. , 24, 68, 1992.
69. Leite, O. C., Design alternatives, components key to optimum flares, Oil Gas J. , 23, 70, 1992.
70. American Petroleum Institute, Guide for Pressure-Relieving and Depressuring Systems, API Recommended Practice 521 , 4th ed., Washington, D.C., 1997.
71. U.S. Environmental Protection Agency, Handbook - Control Technologies for Hazardous Air Pollutants , EPA-625-6-91-014, Research Triangle Park, NC, 1991.
72. Pitts, D. M., Regenerative thermal oxidizers: structured packing improves performance, Chem. Eng. , 106(1), 113, 1999.
73. Clean Air Compliance Handbook , Megtec Systems, DePere, WI, 1998.
74. Smith, J., vanVess, H. C., and Abbott, M. M., Introduction to Chemical Engineering Thermodynamics , 6th ed., McGraw-Hill Inc., New York, 2000.
75. Perry, R. H. and Green, D. A., Perry's Chemical Engineers' Handbook , 7th ed., McGraw-Hill, New York, 1997.
76. Colburn, A. P. and Hougan, O. A., I&E Chem. , 26, 1178-1182, 1934.
77. Silver, L., Gas cooling with aqueous condensation, Trans. Inst. Chem. Eng. , 25, 30-42, 1947.
78. Bell, K. G. and Ghaly, M. A., An approximate generalized design method for multicomponent partial condensers, Chem. Eng. Prog. Symp. Ser., 131, 72-79, 1973.
79. Williams, T. O. and Miller, F. C., Odor control using biofiltration, BioCycle, 72-77, October 1992.
80. Leson, G. and Winer, A. M., Biofiltration: An innovative air pollution control technology for VOC emissions, J. Air Waste Manage. Assoc., 41(8), 1045-1054, 1991.
81. Speece, R. E., Biofiltration of gaseous contaminants, State-of-the-art report to Weyerhauser Corporation, May 24, 1995.
82. Kampbell, D. H. et al., Removal of volatile aliphatic hydrocarbons in a soil bioreactor, J. Air Poll. Contr. Assoc., 37(10), 1236-1240, 1987.
83. Williams, T. O. and Miller, F. C., Biofilters and facility operations, BioCycle, 75-79, November, 1992.
84. Bohn, H. L., Soil and compost filters of malodorous gases, J. Air Poll. Contr. Assoc., 25(9), 953-955, 1975.
85. Bohn, H. L. and Bohn, R. K., Soil beds weed out air pollutants, Chem. Eng., 95(6), 73-76, 1988.
86. Adler, S. F., Biofiltration - a primer, Chem. Eng. Progr., 97(4), 33-41, April 2001.
87. Lokhandwala, K. A. and Jacobs, M., New membrane applications in gas processing, presented at the 79th Annual Gas Processors Assoc. Conv., Atlanta, GA, March 2000.
88. Simmons, V. et al., Membrane systems offer a new way to recover volatile organic air pollutants, Chem. Eng., 101(9), 92, September 1994.
89. Jacobs, M., Gottschlich, D., and Buchner, F, Monomer recovery in polyolefin plants using membranes - an update, presented at the 1999 Petrochemical World Review, Houston, TX, March 23-25, 1999.
90. Baker, R. W. and Jacobs, M., Improve monomer recovery from polyolefin resin degassing, Hydrocarbon Proc., 75(3), 49, March 1996.
91. Baker, R. W. et al., Recover feedstock and product from reactor vent streams, Chem. Eng. Progr., 99(12), 51, 2000.
92. Zeldovich, Y. A., Oxidation of Nitrogen in Combustion, Academy of Sciences of USSR, Institute of Chemical Physics, Moscow-Leningrad, 1947.
93. Pershing, D. W. and Wendt, J. O. L., Relative contributions of volatile nitrogen and char nitrogen to NOx emissions from pulverized coal flames, Ind. Eng. Chem. Proc. Design and Dev., 18(60), 1979.
94. Gregory, M. G., Cochran, J. R., Fischer, D. M., and Harpenau, M. G., The cost of complying with NOx emission regulations for existing coal fueled boilers, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
95. Booth, R. C., Kosvic, T. C., and Parikh, N. J., The emissions, operational, and performance issues of neural network control applications for coal-fired electric utility boilers, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
96. Wood, S. C., Select the right NOx control technology, Chem. Eng. Progr., 90(1), 32, 1994.
97. John Zink Company, Burner design parameters for flue gas NOx control, Technical Paper 4010B, 1993.
98. Himes, R., Scharnott, M., and Hoyum, R., Fuel system modifications and boiler tuning to achieve early election compliance on a 372-MWe coal-fired tangential boiler, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
99. Wendt, J. O. L. et al., Reduction of sulfur trioxide and nitrogen oxides by secondary fuel injection, in Proc. 14th Int. Symp. Combustion, 897, 1973.
100. Folsom, B. A. et al., Field experience - reburn NOx control, presented at EPRIDOE- EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
101. Garg, A., Specify better low-NOx burners for furnaces, Chem. Eng. Progr., 90(1), 46, 1994.
102. Sivy, J. L., Sarv, H., and Koslosky, J. V., NOx subsystem evaluation of B&W's advanced coal-fired low emission boiler system at 100 Million BTU/hr, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
103. Bortz, S. J. et al., Ultra-low NOx rapid mix burner demonstration at Con Edison's 59th Street Station, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
104. Chen, W. et al., Deviation and application of a global SNCR model in maximizing NOx reduction, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symposium, Washington, D.C., August 25-29, 1997.
105. Ferrell, R., Controlling NOx emissions: a cooler alternative, Poll. Eng., 4, 50, 2000.
106. Reyes, B. E. and Cutshaw, T. R., SCONOx™ catalytic absorption system, Western Energy, 13, March 1999.
107. Haythornthwaite, S. et al., Stationary source NOx control using pulse-corona induced plasma, presented at EPRI-DOE-EPA Combined Utility Air Pollutant Control Symp., Washington, D.C., August 25-29, 1997.
108. Brown, C., Pick the best acid-gas emission controls for your plant, Chem. Eng. Progr., 94(10), 63, 1998.
109. Lunt, R. R. and Cunic, J. D., Profiles in Flue Gas Desulfurization, AIChE, New York, 2000.
110. Brown, C. A. et al., Results from the TVA 10-MW spray dryer/ESP evaluation., presented at EPA/EPRI First Combined FGD and Dry SO2 Control Symp., St. Louis, MO, October 25-28, 1988.
111. Hedenhag, J. G. and Goss, W. L., Gas suspension absorption: A new approach in FGD systems for boilers and incinerators, presented at the 88th Annual Meeting Air & Waste Management Assoc., San Antonio, TX, June 18-23, 1995.
112. Lepovitz., L. R. et al., Results of the recent testing of the 10-MW gas suspension absorption flue gas desulfurization technology, presented at 88th Annual Meeting of the Air & Waste Management Assoc., San Antonio, TX, June 18-23, 1995.
113. Moore, S. R., Toher, J. G., and Sauer, H., Update of the EEC/Lurgi high efficiency, dry circulating fluid bed scrubber experience, presented at EPRI Conf. on Improved Technology for Fossil Fueled Power Plants - New and Retrofit Application, Washington, D.C., March 1, 1993.
114. Bland, V. V. and Martin, C. E., Full-scale demonstration of additives for NO2 reduction with dry sodium desulfurization, Electric Power Research Institute, Palo Alto, CA, EPRI GS-6852, 1990.
115. Baldwin, A. B. Trona use in dry sodium injection for acid gas removal, presented at Society of Mining Engineers, Denver, CO, February 1995.
116. Gmitro, J. I. and Vermeulen, T., Vapor-liquid equilibria for aqueous sulfuric acid, AIChE, 10, 740, 1964.
117. Haase, R. and Borgmann, H. W., Korrosion, 15, 47, January 1981.
118. Verhoff, F. H. and Banchero, J. T., Predicting dew points of flue gases, Chem. Eng. Progr., 70(8), 71, 1974.
119. Okkes, A. G. and Badger, B. V., Get acid dew point of flue gas, Hydrocarbon Proc., 66(7), 53, 1987.
120. Jones, C. and Ellison, W., SO3 tinges stack gas from scrubbed coal-fired units, Power, 142(4), 73, 1998.
121. Emergency Planning and Community Right-To-Know Act - Section 313: Guidance for Reporting Sulfuric Acid, U.S. EPA, Office of Pollution Prevention and Toxics, Washington, D.C., EPA-745-R-97-007, 1998.
122. Davies, C. N., Definitive equations for the fluid resistance of spheres, Proc. Phys. Soc., 57, 259, 1945.
123. Dalla Valle, J. M., Exhaust Hoods, Industrial Press, New York, 1952.
124. Hemeon, W. E. L., Plant and Process Ventilation, Industrial Press, New York, 1954.
125. American Conference of Governmental Industrial Hygienists, Committee on Industrial Ventilation, Industrial Ventilation, A Manual of Recommended Practice, 9th ed., ACGIH, Lansing, MI, 1966.
126. American Society of Heating, Refrigerating, and Air Conditioning Engineers, ASHRAE Handbook - Heating, Ventilating, and Air Conditioning Systems and Application, Atlanta, GA, 1987.
127. Goodfellow, H. D., Auxiliary equipment for local exhaust ventilation systems, in Air Pollution Engineering Manual, Buonicore, A. J. and Davis, W.T., Eds., Air and Waste Management Association, Van Nostrand Reinhold, New York, 1992, chap. 6.
128. King R. H., Chem. Eng. Progr., 60-69, May, 1997.
129. Brandt, A. D., reference section of Heating and Ventilating, May, 1945.
130. McCabe, W. L., Smith, J. C., and Harriott, P., Unit Operations in Chemical Engineering, 4th ed., McGraw-Hill Book Co., New York, 1985.
131. Cooper, C. D. and Alley, F. C., Air Pollution Control, 2nd ed., Waveland Press, Inc., Prospect Heights, IL, 1994.
132. Lapple, C. E., Processes use many collector types, Chem. Eng., 58, 5, May 1951.
133. Leith, D. and Licht, W., The collection efficiency of cyclone type particle collectors - A new theoretical approach, AIChE Symp. Series, 126 (68), 1972.
134. Stairmand, C. J., The design and performance of cyclone separators, Trans. Ind. Chem. Eng., 29, 1951.
135. Swift, P., Dust control in industry, Steam Heating Eng., 38, 1969.
136. Miller and Lissman, Calculation of cyclone pressure drop, presented at meeting of American Soc. of Mech. Eng., New York, December 1940.
137. Shepherd, C. B. and Lapple, C. E., Flow pattern and pressure drop in cyclone dust collectors, Ind. Eng. Chem., 32(9), 1940.
138. Kalen, B., and Zenz, F., Theoretical empirical approach to saltation velocity in cyclone design, AIChE Symp. Series, 70(137), 1974.
139. Koch, W. H. and Licht, W., New design approach boosts cyclone efficiency, Chem. Eng., 84(24), 1977.
140. Crocker, B. B. and Schnelle, Jr., K. B., Air pollution control for stationary sources, in Environmental Analysis and Remediation, Meyers, R. A. (Ed.), John Wiley & Sons, Inc., New York, 1998, pp. 151-213.
141. Hesketh, H. E., Atomization and cloud behavior in wet scrubbers, US-USSR Symp. Control of Fine Particulate Emissions (1), 15, 1974.
142. Calvert, S., Goldshmidt, F., Leith, D., and Mehta, D., Scrubber Handbook, NTIS Publication PB-213016 and PP-213017, July-August 1972.
143. Porter, H. F., Schurr, G. A., Wells, D. F., and Semrau, K. T., in Chemical Engineers' Handbook, 6th ed., McGraw-Hill Book Co., New York, 1984, pp. 20-77 to 20-110.
144. Sargent, G. D., Dust collection equipment, Chem. Eng., 76, 130-150, 1969.
145. Celenza, G. F., Designing air pollution control systems, Chem. Eng. Prog., 66(11), 31, 1970.
146. Semrau, K. T., Correlation of dust scrubber efficiency, J. Air Poll. Contr. Technol. Assoc., 10(3), 200, 1960.
147. Semrau, K. T., Dust scrubber design - a critique on the state of the art, J. Air Poll. Contr. Technol. Assoc., 13(12), 587, 1963.
148. Calvert, S., Engineering design of fine particle scrubbers, J. Air Poll. Contr. Assoc., 24(10), 929, 1974.
149. Calvert, S., How to choose a particulate scrubber, Chem. Eng., 54-68, August 29, 1977.
150. Licht, W., Air Pollution Control Engineering, Basic Calculations for Particulate Collection, 2nd ed., Marcel Dekker, Inc., New York, 1988.
151. Loftus, P. J., Stickler, D. B., and Diehl, R. C., A confined vortex scrubber for fine particulate removal from flue gases, Environ. Prog., 11, 27-32, 1992.
152. Blackwood, T. R., An evaluation of fine particle wet scrubbers, Environ. Prog., 7, 71-75, 1988.
153. Schimmoller, B. K., Tuning in to acoustic cleaning, Power Eng. , 103(107), 19, 1999.
154. Plinke, M. et al., Catalytic filtration - dioxin destruction in a filter bag, in Recent Developments in Air Pollution Control, Topical Conf. Proc. AIChE Spring National Mtg. , Atlanta, 167, 2000.
155. Wagner, R. A., Ceramic composite hot-gas filter development, presented at Symp. on High-Temperature Particulate Cleanup, Birmingham, AL, April 20-23, 1998.
156. Bustard, C. J. et al., Demonstration of novel additives for improved fabric filter performance, presented at EPRI/DOE Int. Conf. Managing Hazardous and Particulate Air Pollutants, Toronto, August 15-18, 1995.
157. McDonald, J. R., Computer simulation of the electrostatic precipitation process, in Proc. Int. Conf. Electrostatic Precipitation, Air Pollution Control Assoc., Pittsburgh, October 1981.
158. Katz, J., Factors affecting resistivity in electrostatic precipitation, J. Air Poll. Contr. Assoc., 30(1), 165, 1980.
159. Gas Flow Model Studies, Industrial Gas Cleaning Institute, Pub. No. E-P7, Rev I, Washington, D.C., 1969.
160. Hein, A. G., Dust reentrainment, gas distribution and electrostatic precipitator performance, J. Air Poll. Contr. Assoc., 39(5), 766, 1989.
161. The McIlvaine Company, Skewed gas flow technology demonstrated in South Africa, Precip. Newsletter, 241, 1996.
162. Butz, J. R., Baldrey, K. E., and Sam, D. O., Computer modeling of ESP performance improvement due to spray cooling, presented at EPRI/DOE Int. Conf. on Managing Hazardous and Particulate Air Pollutants, Toronto, August 15-18, 1995.
163. Reese, J. T. and Greco, J., Electrostatic precipitation, Mech. Eng., 90(10), 13-7, 1968.
164. Watson, K. S. and Blecher, K. J., Investigation of electrostatic precipitators for large P.F. fired boilers, presented at Clean Air Conference, Sydney, Australia, 1965.
165. Dismukes, E. B., Conditioning of Fly Ash with Sulfur Trioxide and Ammonia, Environmental Protection Agency, EPA-600/2-75-015, TVA-F75 PRS-5, 1975.
166. Krigmont, H. V. and Coe, Jr., E. L., Experience with dual flue gas conditioning of electrostatic precipitators, presented at Eighth Symp. on Transfer and Utilization of Particulate Control Technology, San Diego, March 20-23, 1990.
167. Durham, M. D., personal communication, 2000.
168. Gooch, J. P., Bickelhaupt, R. E., and Dismukes, E. B., Investigation of Ammonium Sulfate Conditioning for Cold-Side Electrostatic Precipitators - Volume 1: Field and Laboratory Studies, Electric Power Research Institute, EPRI CS-3354, 1, 1984.
169. Durham, M. D., Bustard, C. J., and Martin, C. E., New ESP additive controls particulates, Power Eng., 101(06), 44, 1997.
170. Durham, M. D. et al., Full-scale experience with ADA-34 2nd generation flue gas conditioning for hot-side and cold-side ESPs, in EPRI-DOE-EPA Combined Utility Air Pollution Control Symp. The MEGA Symp., EPRI, 1999.