Urban flood mitigation and stormwater management

Urban Flood Mitigation and Stormwater Management

Volumn , Issue , 2017, Pages 1-589

  Guo, James C Y ^a  

^a UNIVERSITY OF COLORADO   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85048947074     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b21972     Document Type: Book

References (379)

1. City and County of Denver, Colorado. (2010). Urban Stormwater Drainage Criteria Manual, Volumes 1, 2, and 3, Urban Drainage and Flood Control District, Denver, CO.
2. City and County of Sacramento, California. (1992). Hydrologic Standards, prepared by Brown and Caldwell Inc., Sacramento, CA.
3. City of Tucson, Arizona. (2010). Standards Manual for Drainage Design and Floodplain Management, prepared by Simons, Li, and Associates, Inc., Tucson, AZ.
4. Clark County, Nevada. (1999). Hydrologic Criteria and Drainage Design Manual, prepared by Montgomery Watson Inc., Las Vegas, NV.
5. Guo, J.C.Y. (1998). Stormwater System Design, Water Resources Publication, Littleton, CO.
6. Sheaffer, J.R., Wright, K.R., Taggart, W.C., and Wright, R.M. (1982). Urban Storm Drainage Management, Marcel Dekker, Inc., New York.
7. UDFCD. (2010). Urban Stormwater Drainage Criteria Manual, Volumes 1, 2, and 3, The Urban Drainage and Flood Control District, Denver, CO.
8. Brakensiek, D.L., Osborn, H.B, and Rawls, W.J. (1979). Field Manual for Research in Agricultural Hydrology, Stock Number 011-000-03798-6, The Superintendent of Documents, U.S. Government Printing Office, Washington, DC.
9. Chow, V.T., Maidment, D.R., and Mays, L.W. (1988). Applied Hydrology, McGraw-Hill Publishing Company, New York.
10. Curtis, D.C., and Burnash, R.J.C. (1996). “Inadvertent Rain Gage Inconsistencies and Their Effect on Hydrologic Analysis,” Proceedings of the 1996 California-Nevada ALERT Users Group Conference, Ventura, CA, May 15-17.
11. Curtis, D.C., and Humphrey, J.H. (1995). “Use of Radar-Rainfall Estimates to Model the January 9-10, 1995 Floods in Sacramento, CA,” Presented at the 1995 Southwest Association of ALERT Systems Conference held in Tulsa, OK, October 25-27.
12. Frederick, R.H., Myers, V.A., and Auciello, E.P. (1977). “Five to 60-Minute Precipitation Frequency for the Eastern and Central United States,” NOAA Technical Memorandum NWS HYDRO-35, National Weather Service, Silver Spring, MD.
13. Gray, D.M. (1973). Handbook on the Principles of Hydrology, Water Information Center, Water Research Building, Port Washington, NY.
14. Guo, J.C.Y. (2001). “Rain Undercatch Due to Wind and Vegetal Effects,” ASCE Journal of Hydrologic Engineering, Vol. 6, No. 1, pp. 29-33.
15. Hamon, W.R. (1973). “Computing Actual Precipitation; Distribution of Precipitation in Mountainous Area,” Volume 1. WMO Report, No. 362, World Meteorological Organization, Geneva, Switzerland.
16. Hanson, C.L., Johnson, G.L.M., and Rango, A. (1999). “Comparison of Precipitation Catch Between Nine Measuring Systems,” ASCE Journal of Hydrologic Engineering, Vol. 4, No. 1, pp. 70-75.
17. HEC-1 Flood hydrograph Package. (1985). Published by the Hydrologic Engineering Center, U.S. Army Corps of Engineers, Davis, CA.
18. Hershfield, D.M. (1961). “Rainfall Frequency Atlas of the United States for Durations from 30 Minutes to 24 Hours and Return Periods from 1 to 100 Years,” Technical paper 40, U.S. Department of Commerce, Weather Bureau, Washington, DC.
19. Hershfield, D.M. (1962). “Extreme Rainfall Relationships,” Journal of the Hydraulics Division American Society of Civil Engineers, Vol. 88, No. HY6, pp. 73-92.
20. Hershfield, D.M. (1971). “Agricultural Research Service Precipitation Facilities and Related Studies,” Report ARS 41-176, Agricultural Research Service, Washington, DC.
21. Kurtyka, J.C., Binks, V.M.B., and Buswell, A.M. (1953). “Precipitation Measurement Study,” U.S. Army, Signal Corps of Engineering Laboratories, Ft. Monmouth, NJ, and Report of Investigation No. 20, State Water Survey Division, Urbana, IL.
22. Larson, L., and Peck, E.L. (1974). “Accuracy of Precipitation Measurements for Hydrologic Forecasting,” Water Resources Research, Vol. 10, No. 4, pp. 857-863.
23. Liggett, J.A. (1994). Fluid Mechanics, McGraw-Hill, Inc., New York.
24. Michaud, J.D. (1994). “Effect of Rainfall-Sampling Errors on Simulations of Dessert Flash Floods,” Water Resources Research, Vol. 30, No. 10, pp. 2765-2775.
25. Napor, V., and Sevruk, B. (1999). “Estimation of Wind-Induced Error of Rainfall Gauge Measurements Using a Numerical Simulation,” Journal of Atmospheric and Oceanic Technology, Vol. 16, No. 5, pp. 450-464.
26. Sevruk, B. (1982). “Methods of Correction for Systematic Error in Point Precipitation Measurement for Operation Use,” Operational Hydrology Report 12, World Meteorological Organization, Geneva, Switzerland.
27. Symons, G.J. (1866). Notes on Some Results of Various Sets of Experimental Gages, British Rainfall, UK.
28. Symons, G.J. (1880). On the Amount of Rain Collected at Very Considerable Heights Above the Ground, British Rainfall, UK.
29. American Society of Civil Engineers. (1957). Hydrology Handbook, Manuals of Engineering Practice, No. 28, ASCE, New York.
30. Chow, V.T. (1957). Hydrologic Determination of Waterway Areas for the Design of Drainage Structures in Small Drainage Basins, Engineering Experiment Station Bulletin 462, University of Illinois at Champaign, Urbana, IL.
31. Chow, V.T., Maidment, D.R., and Mays, L.W. (1988). Applied Hydrology, McGraw Hill, Inc., New York.
32. CUHP. (2005). Colorado Urban Unitgraph Procedure, Chapter of Runoff, Urban Storm Water Design Criteria Manual, UDFCD, Denver, CO.
33. Dooge, J.C.I. (1959). “A General Theory of the Unit Hydrograph,” Journal of Geophysical Research, Vol. 64, No. 2, pp. 241-256.
34. Eagleson, P.S. (1962). “Unit Hydrographs for Characteristics Sewered Areas,” Journal of the Hydraulics Division, Vol. 88, No. HY2, pp. 1-25.
35. Green, W.H., and Ampt, G.A. (1911). “Studies of Soil Physics, I: The Flow of Air and Water Through Soils,” Journal of Agriculture Science, Vol. 4, No. 1, pp. 1-24.
36. Guo, J.C.Y. (1988). “Colorado Unit Hydrograph Procedures—Its Synthetic Unit Hydrograph Characteristics,” Proceedings of ASCE International Conference on Hydraulic Engineering held at Colorado Springs, CO.
37. Henderson, F.M., and Wooding, R.A. (1964). “Overland Flow and Groundwater Flow from Steady Rainfall of Finite Duration,” Journal of Geophysical Research, Vol. 69, No. 8, pp. 1531-1539.
38. HMS. (2015). Hydrologic Analytic Model—Flood Hydrograph Package Manual, updated 1987, U.S. Army Corps of Engineers, Davis, CA.
39. Horton, R.E. (1933). “The Role of Infiltration in the Hydrologic Cycle,” Transactions American Geophysical Union, Vol. 14, pp. 446-460.
40. Kohler, M.A., and Linsley, R.K. Jr. (1951). “Predicting the Runoff from Storm Rainfall,” U.S. Weather Bureau, Research Paper 34.
41. Kuichling, E. (1889). “The Relation Between the Rainfall and the Discharge of Sewers in Populous Districts,” Transactions of the American Society of Civil Engineers, Vol. 20, pp. 1-56.
42. Nash, J.E. 1958. “The Form of the Instantaneous Unit Hydrograph,” General Assembly of Toronto, International Association Scientific Hydrology (Gentbrugge) Pub. 42, Compt. Rend. 3, pp. 114-118.
43. NRCS SCS. (1964). SCS National Engineering Handbook, “Section 4: Hydrology,” updated 1972, U.S. Department of Agriculture, Washington, DC.
44. NRCS SCS. (1986). Urban Hydrology for Small Watersheds, 2nd ed., Technical Release No. 55 (NTIS PB87-101580), U.S. Department of Agriculture, Washington, DC.
45. Overton, D.E., and Meadows, M.E. (1976). Stormwater Modeling, Academic Press, New York.
46. Sherman, L.K. (1932). “Stream Flow from Rainfall by Unit-Graph Method,” Engineering News-Record, Vol. 108, pp. 501-505.
47. Snyder, F.F. (1938). “Synthetic Unitgraphs,” Transactions American Geophysical Union, Vol. 19, pp. 447-454.
48. Snyder, W.M. (1955). “Hydrograph Analysis by the Method of Least Squares,” ASCE, Journal of Hydraulics Division, Vol. 81, pp. 1-25.
49. Tauxe, G.W. (1978). “S-Hydrographs and Change of Unit Hydrograph Duration,” ASCE Technical Notes, Journal of Hydraulics Division, Vol. 104, No. HY3, pp. 439-444.
50. Taylor, A.B., and Schwartz, H.E. (1952). “Unit Hydrograph Lag and Peak Flow Related to Basin Characteristics,” Transactions American Geophysical Union, Vol. 33, pp. 235-246.
51. USWDCM. (2010). Urban Stormwater Design Criteria Manual, Urban Drainage and Flood Control District, Denver, CO.
52. Viessman, W., Lewis, G.L., and Knapp, J.W. (1989). Introduction to Hydrology, 3rd ed., Harper & Row, New York.
53. Abramowtiz, M., and Stegun, I.A. (1965). Handbook of Mathematical Functions, Dover, New York.
54. Beard, L.R. (1962). Statistical Methods in Hydrology, U.S. Army Corps of Engineers, Sacramento, CA.
55. Bulletin 17. (1982, 1983). Guidelines for Determining Flood Flow Frequency, U.S. Interagency Advisory Committee on Water Data, Bulletin #17B of the Hydrology Subcommittee, OWDC, US Geological Survey, Reston, VA.
56. Chow, V.T., Maidment, D.R., and Mays, L.M. (1988). Applied Hydrology, McGraw-Hill Company, New York.
57. Gringorten, I.I. (1963). “A Plotting Rule for Extreme Probability Paper,” Journal of Geophysical Research, Vol. 68, No. 3, pp. 813-814.
58. Gumbel, E.J. (1954). “The Statistical Theory of Theory of Droughts,” Proceedings of the American Society of Civil Engineering, Vol. 80, pp. 1-19.
59. Guo, J.C.Y. (1986). “Software for Hydrologic Frequency Analysis,” the Fourth National Conference on the Application of Microcomputer to Civil Engineering, Orlando, FL, pp. 308-310.
60. Han, C.T. (1977). Statistical Method in Hydrology, The Iowa State University Press, Ames.
61. Harter, H.L. (1969). “A New Table of Percentage Points of the Pearson Type III Distribution,” Technometrics, Vol. 11, No. 1, pp. 177-187.
62. Harter, H.L. (1971). “More Percentage Points of the Pearson Distribution,” Technometrics, Vol. 13, No. 1, pp. 203-204.
63. HEC SSP. (2005). Hydrologic Statistical Package, Hydrologic Engineering Center, US Army Corps of Engineers, Davis, CA.
64. Kite, G.W. (1977). Frequency and Risk Analysis in Hydrology, Water Resources Publications, Littleton, CO.
65. Peak FQ Program. (2005). User’s Manual for Computer Program PEAK FQ, office of surface water, USGS. http://water.usgs.gov/osw/bulletin17b/bulletin_17B.html.
66. Wallis, J.R., Matalas, N.C., and Slack, J.R. (1974). “Just a Moment,” Water Resources Research, Vol. 10, No. 2, 211-219.
67. AGU Committee. (2015). American Geophysical Union, Committee on Runoff. http://sites.agu.org/.
68. CCRFCD Manual. (1999). Clark County Regional Flood Control District, Design Manual, http://gustfront.ccrfcd.org/pdf_arch1/hcddm/Current%20Manual%20by%20Section/Section%20 100.pdf.
69. Chen, C.L. (1976). “Urban Storm Runoff Inlet Hydrograph Study,” Volume 4, Synthetic Storms for Design of Urban Highway Drainage Facilities, Report, Utah Water Research Laboratory, Utah State University, Logan.
70. Chow, V.T., Maidment, D.R., and Mays, L.M., (1988). Applied Hydrology, McGraw-Hill Company, New York.
71. CUHP. (2010). “Colorado Urban Hydrograph Procedure,” Urban Stormwate Drainage Manual, Urban Drainage and Flood Control District, Denver, CO.
72. Guo, J.C.Y. (1998). “Overland Flow on a Pervious Surface,” International Journal of Water, Vol. 23, No. 2, pp. 91-95.
73. Guo, J.C.Y. (2000). “A Semi Virtual Watershed Model by Neural Networks,” Journal of Computer-Aided Civil and Infrastructure Engineering, Vol. 15, pp. 439-444.
74. Guo, J.C.Y. (2001a). “Rational Hydrograph Method for Small Urban Watersheds,” Journal of Hydrologic Engineering, Vol. 6, No. 4, pp. 352-357.
75. Guo, J.C.Y. (2001b). “Storm Hydrographs from Small Urban Catchment,” Journal of International Water, Vol. 25, No. 3, pp. 481-487.
76. Guo, J.C.Y. (2003). Response to Discussion on “Rational Hydrograph Method for Small Urban Catchments,” Journal of Hydrologic Engineering, Vol. 2, No. 1.
77. Guo, J.C.Y., and MacKenzie, K. (2014). “Modeling Consistency for Small to Large Watershed Studies,” Journal of Hydrologic Engineering, Vol. 19, No. 8, 04014009-1 to-7.
78. Guo, J.C.Y., and Urbonas, B. (2014). “Volume-Based Runoff Coefficient,” Journal of Irrigation and Drainage Engineering, Vol. 140, No. 2, 04013013-1 to-5.
79. HEC-1. (2005). Hydrologic Package for Watershed Analysis, U.S. Army Corps of Engineers, Hydrologic Engineering Center, Davis, CA.
80. Hershfield, D.M. (1961). “Rainfall Frequency Atlas of the United States for Durations from 30 Minutes to 24 Hours and Return Periods from 1 to 100 Years,” Technical Paper No. 40, U.S. Department of Commerce, Weather Bureau, Washington, DC.
81. HMS. (2010). Hydrologic Modeling Simulation Package, U.S. Army Corps of Engineers, Hydrologic Engineering Center, Davis, CA.
82. Kirpich, Z.P. (1940). “Time of Concentration for Small Agricultural Watersheds,” Civil Engineering, Vol. 10, No. 6, p. 362.
83. Kuichling, E. (1889). “The Relation Between Rainfall and the Discharge of Sewers in Populous Districts,” Transactions of the American Society of Civil Engineers, Vol. 20, pp. 1-56.
84. McCuen, R. (1982). A Guide to Hydrologic Analysis Using SCS Methods, Prentice-Hall, Inc., Englewood Cliffs, NJ.
85. McCuen, R.H., Wong, S.L., and Rawls, W.J. (1984). “Estimating Urban Time of Concentration,” Journal of Hydraulic Engineering, Vol. 110, No. 7, pp. 887-904.
86. McPherson, M.B. (1968). Urban Water Resources Research, ASCS Task Committee, published by ASCE Urban Hydrology Research Council, New York.
87. Morgali, J.R. (1970). “Laminar and Turbulent Overland Flow Hydrographs,” Journal of Hydraulic Engineering, Vol. 96, No. HY2, pp. 441-360.
88. NRCS. (2013). SCS Upland Method. http://www.nrcs.usda.gov/wps/portal/nrcs/site/national/home/.
89. Rossman, L. (2005). EPA SWMM5. http://www2.epa.gov/water-research/storm-water-management-model-swmm.
90. Schaake, J.C. (1965). “Synthesis of the Inlet Hydrograph,” John Hopkins Storm Drainage Research Project, Technical Report No. 3.
91. Singh, V.P. (1982). Hydrologic Systems: Rainfall-Runoff Modeling, Volume 1, Prentice-Hall, Inc., Englewood Cliffs, NJ.
92. Singh, V.P., and Cruise, J.F. (1992). “Analysis of the Rational Formula Using a System Approach,” Catchment Runoff and Rational Formula, edited by B.C. Yen, Water Resources Publication, Littleton, CO, pp. 39-51.
93. Soil Conservation Service (SCS) or Natural Resource Conservation Service (NRCS). (1976). “Rainfall-Runoff for Small Watersheds,” Technical Release No. 55, U.S. Government Printing Office, Washington, DC.
94. UDFCD. (2010). “Rainfall and Runoff,” Volume 1, Urban Storm Water Design Criteria Manual (USWDCM), Urban Drainage and Flood Control District, Denver, CO.
95. USGS Open File Report 82-873. (1983). “Rainfall-Runoff Data from Small Watersheds in Colorado, October 1977 through September 1980,” USGS, Lakewood, CO.
96. Wooding, R.A. (1965). “A Hydraulic Model for a Catchment-Stream Problem,” Journal of Hydrology, Vol. 3, pp. 254-267.
97. Yen, B.C., and Chow, V.T. (1974). Experimental Investigation of Watershed Surface Runoff, Hydraulic Engineering Series, No. 29, Department of Civil Engineering, University of Illinois at Urbana-Champaign.
98. Yu, Y.S., and McNown, R.K. (1965). “Runoff from Impervious Surfaces,” Journal of Hydraulic Research, Vol. 2, No. 1, pp. 3-24.
99. Bedient, P.B., Huber, W.C., and Vieux, B.E. (2008). Hydrology and Floodplain Analysis, 4th ed., Prentice-Hall, Upper Saddle River, NJ.
100. Blackler, G., and Guo, J.C.Y. (2012). “Field Test of Paved Area Reduction Factors Using a Storm Water Management Model and Water Quality Test Site,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 17, No. 8.
101. Chow, V.T. (1964). Handbook of Applied Hydrology, McGraw-Hill Book Company, New York. Eagleson, P.S. (1970). Dynamic Hydrology, McGraw Hill, New York, pp. 344-346.
102. EPA SWMM5. (2005). Stormwater Management Model published by US EPA. http://www2.epa.gov/water-research/storm-water-management-model-swmm.
103. Guo, J.C.Y. (1984). “Effects of Infiltration on Hydrograph,” Proceedings of ASCE International Conference on Irrigation and Drainage Engineering, held at Flagstaff, Arizona.
104. Guo, J.C.Y. (1988). “Dynamics and Kinematics of Overland Flow,” Proceedings of ASCE International Conference on Hydraulic Engineering held at Colorado Springs, CO.
105. Guo, J.C.Y. (1998). “Overland Flow on a Pervious Surface,” IWRA International Journal of Water, Vol. 23, No. 2, 91-96.
106. Guo, J.C. Y. (2000). “Storm Hydrographs for Small Catchments,” International Journal of Water, AWRA, Vol. 23, No. 2.
107. Guo, J.C.Y. (2001). “Rational Hydrograph Method for Small Urban Catchments,” ASCE Journal of Hydrologic Engineering, Vol. 6, No. 4.
108. Guo, J.C.Y. (2006). “Dimensionless Kinematic Wave Unit Hydrograph for Storm Water Predictions,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 132, No. 4.
109. Guo, J.C.Y. (2012). “Storm Centering Approach for Flood Predictions from Large Watersheds,” ASCE Journal of Hydrologic Engineering, Vol. 17, No. 9.
110. Guo, J.C.Y. (2014). Closure on “Storm Centering Approach for Flood Predictions from Large Watersheds,” ASCE Journal of Hydrologic Engineering, Vol. 19, No. 1, pp. 272-274.
111. Guo, J.C.Y., and Urbanos, B. (2009). “Conversion of Natural Watershed to Kinematic Wave Cascading Plane,” Journal of Hydrologic Engineering, Vol. 14, No. 8, pp. 839-846.
112. Guo, J.C.Y., Cheng, J., and Wright, L. (2012). “Field Test on Conversion of Natural Watershed into Kinematic Wave Rectangular Planes,” ASCE Journal of Hydrologic Engineering, Vol. 17, No. 8.
113. HEC-1. (1993). Introduction and Application of Kinematic Wave Routing Techniques Using HEC-1, United States Army Corps of Engineers, Davis, CA.
114. HECHMS. (2015). HEC Hydrologic Modeling System, Volume 4, U.S. Army Corps of Engineers, Davis, CA.
115. Henderson, F.M., and Wooding, F.A. (1964). “Overland Flow and Groundwater Flow from Steady Rainfall of Finite Duration,” Journal of Geophysical Research, Vol. 69, No. 8, pp. 1531-1539.
116. Izzard, C.F. (1946). “Hydraulics of Runoff from Developed Surfaces,” Proceedings of the Twenty-Sixth Annual Meeting of the Highway Research Board held at Washington, DC. December 5-8, 1946, Highway Research Board Proceedings, pp. 129-146.
117. Kuichling, E. (1889). “The Relation Between the Rainfall and the Discharge of Sewers in Populous Districts,” Transactions of the American Society of Civil Engineers, Vol. 20, pp. 1-56.
118. Langford, K.J., and Turner, A.K. (1973). “An Experimental Study of the Application of Kinematic Wave Theory to Overland Flow,” Journal of Hydrology, Vol. 18, pp. 125-245.
119. Lighthill, M.J., and Hitham, G.B. (1955). “On Kinematic Waves, Part 1: Flood Movement in Long Rivers,” Proceedings of the Royal Society of London A, Vol. 229, No. 1178, pp. 281-316.
120. Mark Group. (1988). Flood Control Master Plan for Maopa Valley, Nevada, Technical Report, prepared by the Mark Group, Engineering and Geologists, Inc., Las Vegas, NV.
121. Master Plan Update. (2000). Master Drainage Plan Update for Las Vega Valley, prepared by Clark County Regional Flood Control District, Las Vegas, NV.
122. Morris, E.M., and Woolhiser, D.A. (1980). “Unsteady One Dimensional Flow Over a Plane: Partial Equilibrium and Recession Hydrographs,” Water Resources Research, Vol. 16, No. 2, pp. 335-360.
123. Overton, D.E., and Meadows, M.E. (1976). Stormwater Modeling, Academic Press, New York.
124. Rossman, L.A. (2010). Storm Water Management Model, User’s Manual, Version 5.0, EPA/600/R-05/040, EPA, Cincinnatim, OH.
125. Singh, V.P., and Woolhiser, D.A. (1976). “A Nonlinear Kinematic Wave Model for Watershed Surface Runoff,” Journal of Hydrology, Vol. 31, pp. 221-243.
126. TR20. (2005). Technical Release 20 published by the Naural Resource Conservation Service. http://www.nrcs.usda.gov/wps/portal/nrcs/detailfull/national/water/manage/?&cid=stelprdb1042924.
127. UDFCD. (2005). Urban Stormwater Design Criteria Manual, supported by the Urban Drainage and Flood Control District, Denver, CO.
128. Wooding, R.A. (1965). “A Hydraulic Mode for a Catchment-Stream Problem,” Journal of Hydrology, Vol. 3, pp. 254-267.
129. Woolhiser, D.A., and Ligget, J.A. (1967). “Unsteady One Dimensional Flow Over a Plane: The Rising Hydrograph,” Water Resources Research, Vol. 3, No. 3, pp. 753-771.
130. Yen, B.C., and Chow, V.T. (1974). Experimental Investigation of Watershed Surface Runoff, Hydraulic Engineer Series, No. 29, Department of Civil Engineering, University of Illinois at Urbana-Champaign.
131. Yu, Y.S., and McNown, R.K. (1965). “Runoff From Impervious Surfaces,” Journal of Hydraulic Research, IAHR, Vol. 2, No. 1, pp. 3-24
132. ADOWR. (2000). Design Guideline for Diversion Channels, Flood Warning and Dam Safety Section, Arizona Department of Water Resources, Phoenix, AZ.
133. ASCE and WEF. (1992). “Design and Construction of Urban Stormwater Management Systems,” American Society of Civil Engineers and Water Environment Federation, Reports of Engineering Practice No. 77 and WEF Manual of Practice FD-20, ASCE, New York.
134. Barnes, H.H. (1967). “Roughness Characteristics of Natural Channels,” Water Supply Paper No. 1849, U.S. Department of the Interior, Geologic Survey, Washington, DC.
135. Chow, V.T. (1959). Open Channel Hydraulics, McGraw-Hill, New York.
136. City and County of Sacramento, California. (1992). Hydrologic Standards, prepared by Brown and Caldwell, Sacramento, CA.
137. Clark County. (1995). Hydrologic Criteria and Drainage Design Manual, Section 700 Open Channels, Clark County Regional Flood Control District, Clark County, Las Vegas, NV.
138. French, R.H. (1985). Open Channel Hydraulics, McGraw Hill, New York.
139. Guo, J.C.Y. (1999a). Channel Design and Flow Analysis, Water Resources Publication, Littleton, CO.
140. Guo, J.C.Y. (1999b). “Critical Flow Section in a Collector Channel,” ASCE Journal of Hydraulic Engineering, Vol. 125, No. 4, doi: 10.1061/(ASCE)0733-9429.
141. Guo, J.C.Y. (2009). “Grade Control for Urban Channel Design,” Journal of Hydro-environment Research, pp. 239-242, doi: 10.1016/j.jher.2009.01.001.
142. Little, W.C. and Murphey, J.B. (1982). “Model Study of Low Drop Grade Control Structures,” Journal of the Hydraulic Division, Vol. 108, No. HY10, pp. 1132-1146.
143. Manning, R. (1891). “On the Flow of Water in Open Channel and Pipes,” Transactions, Institution of Civil Engineers of Ireland, Dublin, Vol. 20, pp. 161-207.
144. US ACOE. (2008). Hydraulic Design of Flood Control Channels, Department of the Army, US Army Corps of Engineers, Washington, DC, 20314-1000, EM 1110-2-1601.
145. USWDCM. (2001). Urban Storm Water Design Criteria Manual, Volumes 1 and 2, Urban Drainage and Flood Control District, Denver, CO.
146. ADOWR. (2000). Design Guideline for Diversion Channels, Flood Warning and Dam Safety Section, Arizona Department of Water Resources, Phoenix, AZ.
147. Brock, R.R. (1969). “Development of Roll Wave Trains in Open Channels," Proceedings of the ASCE Journal of the Hydraulics Division, Vol. 95, No. HY4, pp. 1401-1427.
148. CCFCD. (1995). “Open Channels," Hydrologic Criteria and Drainage Design Manual, Clark County Regional Flood Control District, Clark County, Las Vegas, NV.
149. Chow, V.T. (1959). Open Channel Hydraulics, McGraw-Hill Civil Engineering Series, New York.
150. Escoffier, F.F., and Boyd, M.B. (1962). “Stability Aspects of Flow in Open Channels," Journal of the Hydraulics Division, ASCE, Vol. 88, No. HY6, pp. 145-166.
151. French, R.H. (1985). Open Channel Hydraulics, McGraw Hill, New York.
152. Guo, J.C.Y. (1999a). Channel Design and Flow Analysis, Water Resources Publication, Littleton, CO.
153. Guo, J.C.Y. (1999b). “Roll Waves in High Gradient Channels," International Water Resources Association’s International Journal of Water, Vol. 3, No.1.
154. Guo, J.C.Y. (2009). “Grade Control for Urban Channel Design," Journal of Hydro-Environmental Research, Vol. 2, No. 4, pp. 239-242, doi: 10.1016/j.jher.2009.01.001.
155. Guo, J.C.Y., and Blackler, G. (2009). “Least Cost and Most Efficient Channel Cross Sections," ASCE Journal of Irrigation and Drainage Engineering, Vol. 135, No. 2, pp. 248-251.
156. Guo, J.C.Y., and Hughes, W. (1984). “Optimal Trapezoidal Cross Sections for Open Channel with Freeboard," ASCE Journal of Irrigation and Drainage Engineering, Vol. 110, No. 3.
157. Ippen, A.T. (1949). “Design of Channel Contractions," Transactions of the American Society of Civil Engineers, Vol. 116, pp. 326-346.
158. Ippen, A.T. (1951). “Mechanics of Supercritical Flow," Transactions of the American Society of Civil Engineers, Vol. 116, pp. 268-295.
159. Manning, R. (1891). “On the Flow of Water in Open Channel and Pipes,” Transactions of the Institution of Civil Engineers of Ireland, Vol. 20, pp. 161-207.
160. Mayer, P.G.W. (1957). “A Study of Roll Waves and Slug Flows in Inclined Open Channels," PhD Dissertation, Cornell University, Ithaca.
161. Rouse, H., Bhoota, B.V., and Hsu, E.Y. (1949). “Design of Channel Expansions," Transactions of the American Society of Civil Engineers, Vol. 116, pp. 347-400.
162. Shunkry, A. (1950). “Flow Around Bends in an Open Flume," ASCE Transactions, Paper No. 2411, Vol. 115, pp. 751-779.
163. Stonstreet, S.E. (1996). “Stochsatic Determination of Wave Heights for Flood Control Channels," ASCE Conference Proceedings of North American Water and Environment Congress.
164. Thorsky, G.N., and Haggman, D.C. (1970). Discussion of “Development of Roll Wave Trains in Open Channels," ASCE Journal of Hydraulic Division, Vol. 96, No. HY4, April.
165. UDFCD. (2010). Urban Drainage and Stormwater Design Criteria, Volumes 1 and 2, Urban Drainage and Flood Control District, Denver, CO.
166. USCOE. (2000). Hydraulic Design of Flood Control Channels, Department of the Army, US Army Corps of Engineers, Washington, DC, 20314-1000, EM 1110-2-1601.
167. Vedernikov, V.V. (1945). “Conditions at the Front of a Translatory Wave Distributing a Steady Motion of a Real Fluid," C.R. USSR Academy of Sciences, Vol. 48, No. 4.
168. Vedernikov, V.V. (1946) “Characteristic Features of a Liquid Flow in an Open Channel," C. R. USSR Academy of Sciences, Vol 52, pp. 207-210.
169. Agrawal, S.K., and Henry, J.J. (1980). “Experimental Investigation of the Transient Aspect of Hydroplaning,” Proceedings of the Annual Meeting of Transportation Research Board, Washington, DC.
170. Agrawal, S.K., Henry, J.J., and Mayer, W.E. (1977). “Measurement of Hydroplaning Potential,” Final Report to Pennsylvania Department of Transportation, Report No. FHWA-PA-72-6.
171. Anderson, D.A. (1993). “Improved Surface Drainage of Pavement,” Research Report prepared by the Pennsylvania State University for National Cooperative Highway Research Program, National Research Council, Transportation Research Board, Washington, DC.
172. CDOT. (1990). Hydraulic Design Criteria for Highways, Colorado Department of Transportation, Denver, CO.
173. City of Denver. (2010). Stormwater Design Criteria, City of Denver, CO.
174. Clark County, Nevada. (1999). Hydrologic Criteria and Drainage Design Manual, Montgomery Watson Inc., Las Vegas, NV.
175. Department of the Army and the Air Force. (1977). “Surface Drainage Facilities for Airfields and Heliports,” Technical Manual No. 5-820-1, Washington, DC.
176. Gallaway, B.M., Ivey, D.L., Hayes, G.G., Ledbetter, W.G., Olson, R.M., Woods, D.L., and Schiller, R.E. (1979). “Pavement and Geometric Design Criteria for Minimizing Hydroplaning,” Federal Highways Administration, Research Report No. FHWA-RD-79-31.
177. Guo, J.C.Y. (1997). Street Hydraulics and Inlet Sizing, Water Resources Publications, LLC, Littleton, CO.
178. Guo, J.C.Y. (1999). “Design of Detention Basins for Small Urban Catchments,” ASCE Journal of Water Resources Planning and Management, Vol. 122, No. 1.
179. Guo, J.C.Y. (2000a). “Design of Grate Inlet with a Clogging Factor,” Journal of Advances in Environmental Research, Vol. 4, pp. 181-186.
180. Guo, J.C.Y. (2000b). “Street Storm Water Conveyance Capacity,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 126, No. 2, pp. 119-123.
181. Guo, J.C.Y. (2000c). “Street Storm Water Storage Capacity,” Journal of Water Environment Research, Vol. 27, No. 6.
182. Guo, J.C.Y. (2006). “Decay-Based Clogging Factor for Curb Inlet Design,” ASCE Journal of Hydraulic Engineering, Vol. 132, No. 11, pp. 1237-1241.
183. Guo, J.C.Y., McKenzie, K., and Mommandi, A. (2008). “Sump Inlet Hydraulics,” ASCE Journal of Hydraulic Engineering, Vol. 135, No. 1.
184. HEC12. (1984). “Drainage of Urban Highway Drainage Pavement.” Hydraulic Engineering Circular No. 12, US Department of Transportation, Federal Highways Administration.
185. HEC22. (2010). Urban Drainage Manual, Hydraulic Engineering Circular No. 22, US Department of Transportation, Federal Highways Administration.
186. Huebner, R.S., Reed, J.R., and Henry, J.J. (1986). “Criteria for Predicting Hydroplaning Potential,” ASCE Journal of Transportation Engineering, Vol. 112, No. 5, pp. 549-553.
187. USWDCM. (2010). Urban Stormwater Drainage Design Criteria Manual, Volumes 1 and 2, Urban Drainage and Flood Control District, Denver, CO.
188. Waugh, P.D., Jones, J.E., Urbonas, B.R., MacKenzie, K.A., and Guo, J.C.Y. (2002). “Denver Urban Storm Drainage Criteria Manual,” ASCE Journal of Urban Drainage, Vol. 112, No 56.
189. CDOT. (1990). Hydraulic Design Criteria for Highways, Colorado Department of Transportation, Denver, CO.
190. Clark County Regional Flood Control District. (1990). Hydrologic Criteria and Drainage Design Manual, Las Vegas, NV.
191. Guo, J.C.Y. (1997). Street Hydraulics and Inlet Sizing, Water Resources Publications, LLC, Littlton, CO.
192. Guo, J.C.Y. (2000a). “Design of Grate Inlet with a Clogging Factor,” Journal of Advances in Environmental Research, Vol. 4, pp. 181-186.
193. Guo, J.C.Y. (2000b). “Street Storm Water Conveyance Capacity,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 126, No. 2, pp. 119-123.
194. Guo, J.C.Y. (2000c). “Street Storm Water Storage Capacity,” Journal of Water Environment Research, Vol. 27, No. 6.
195. Guo, J.C.Y. (2006). “Decay-Based Clogging Factor for Curb Inlet Design,” ASCE Journal of Hydraulic Engineering, Vol. 132, No. 11, pp. 1237-1241.
196. Guo, J.C.Y., McKenzie, K., and Mommandi, A. (2008). “Sump Inlet Hydraulics,” ASCE Journal of Hydraulic Engineering, Vol. 135, No. 1.
197. HEC12. (1984). “Drainage of Urban Highway Drainage Pavement.” Hydraulic Engineering Circular No. 12, U.S. Department of Transportation, Federal Highways Administration.
198. HEC22. (2010). Urban Drainage Manual, Hydraulic Engineering Circular No. 22, U.S. Department of Transportation, Federal Highways Administration.
199. Waugh, P.D., Jones, J.E., Urbonas, B.R., MacKenzie, K.A., and Guo, J.C.Y. (2002). “Denver Urban Storm Drainage Criteria Manual,” ASCE Journal of Urban Drainage, Vol. 112, No. 56.
200. USWDCM. (2010). Urban Storm Water Design Criteria Manual, Volumes 1 and 2, Urban Drainage and Flood Control District, Denver, CO.
201. ASCE. (1991). “Design and Construction of Urban Stormwater Management Systems,” Manuals and Reports of Engineering Practice No 77 or Water Environmental Federation WEF Manual of Practice FD-20.
202. CDOT. (1992). “1986-1992 Cost Data,” Cost Estimates Squad of the Staff Design Branch, Colorado Department of Transportation, Denver, CO.
203. CDOT. (2000). “Standard Specifications for Road and Bridge Construction,” Colorado Department of Transportation, Denver, CO.
204. CDOT. (2015). “Roadway Design Manual,” Colorado Department of Transportation, Denver, CO.
205. Chow, V.T., Maidment, D.R., and Mays, L.M. (1988). “Applied Hydrology,” McGraw-Hill Company, New York.
206. Guo, J.C.Y. (1987). “Development of Risk-Cost Methodology for Detour Culvert Design,” the Research Contract Number 1503A, CDOH-UCD-R-88-5, Colorado Department of Highway, Denver, CO.
207. Guo, J.C.Y. (1998). “Risk-Cost Approach to Interim Drainage Structure Design,” ASCE Journal of Water Resources Planning and Management, Vol. 124, No. 6, pp. 330-333.
208. Guo, J.C.Y. (1999). “Sand Recovery for Highway Drainage Designs,” ASCE Journal of Drainage and Irrigation Engineering, Vol. 125, No. 6, pp. 380-384.
209. HEC14. (1975). “Hydraulic Design of Energy Dissipaters for Culverts and Channels,” U.S. Department of Transportation, Federal Highway Administration, Washington, DC.
210. USGS. (1977). “Water Resources Data Colorado,” U.S. Geological Survey, Water Year 1961 to 1977.
211. USWDCM. (2010). “Urban Stormwater Design Criteria Manual,” Urban Drainage and Flood Control District, Denver, CO.
212. AISI. 1980a. Modern Sewer Design, American Iron and Steel Institute, Washington, DC.
213. AISI. 1980b. Handbook of Steel Drainage and Highway Construction Product, American Iron and Steel Institute, Washington, DC.
214. ASCE. 1979. Design and Construction of Sanitary and Storm Sewer, American Society of Civil Engineers, New York.
215. Guo, J.C.Y. (1985). “Technical Manual for UDSEWER Computer Model.” Research Report, Department of Civil Engineering, University of Colorado at Denver, Denver, CO.
216. Guo, J.C.Y. (1989a). “Energy Dissipation in Storm Sewer System,” Proceedings of ASCE Conference on Stormwater Modeling and Management, held at Denver, CO.
217. Guo, J.C.Y. (1989b). “Auto Sizing Techniques for Storm Sewer System Design Using UDSWMM,” Proceedings for the National EPA Conference, Denver, CO.
218. Mays, L. (2005). Stormwater Collection Tools, McGraw Hills, New York.
219. USWDCM. (2010). Urban Storm Water Design Criteria Manual, Urban Drainage and Flood Control District, Denver, CO.
220. Akan, A.O. (1990). “Single Outlet Pond Analysis and Design,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 116, No. 4, pp. 527-536.
221. Aron, G., and Kibler, D.F. (1990). “Pond Sizing for Rational Formula Hydrographs,” Water Resources Bulletin, Vol. 26, No. 2, pp. 255-258.
222. ASCE. (1984). “Final Report of the Task Committee on Stormwater Detention Outlet Structures,” American Society of Civil Engineers, New York.
223. ASCE. (1992). “Design and Construction of Urban Stormwater Management Systems,” Water Environmental Federation Manual of Practice FD-20, and ASCE Manual and Reports No. 77.
224. Brate, E.F., and King, H.W. (1976). Handbook of Hydraulics, McGraw-Hill Book Company, New York.
225. EPA. (1983). “Results of the Nationwide Urban Runoff Program,” Final Report, U.S. Environmental Protection Agency, NTIS No. PB84-185545, Washington, DC.
226. EPA. (1986). “Methodology for Analysis of Detention Basins for Control of Urban Runoff Quality,” U.S Environmental Protection Agency, EPA440/5-87-001, September 1986.
227. EPA. (1994). Urbanization and Water Quality, prepared by Terrene Institute for U.S. Environmental Protection Agency, Washington, DC.
228. FAA. (1970). “Airport Drainage,” Report 150/5320-5B, U.S. Department of Transportation, Federal Aviation Administration, Washington, DC.
229. FAA. (1977). “Surface Drainage Facilities for Airfields and Heliports,” Technical Manual No. 5-820-1, U.S. Department of the Army and Air Force, Washington, DC.
230. Guo, J.C.Y. (1999). “Detention Storage Volume for Small Urban Catchment,” ASCE Journal of Water Resources Planning and Management, Vol. 125, No. 6, pp. 380-382.
231. Guo, J.C.Y. (2004). “Hydrology-Based Approach to Storm Water Detention Design Using New Routing Schemes,” ASCE Journal of Hydrologic Engineering, Vol. 9, No. 4, pp. 333-336.
232. Guo, J.C.Y. (2007). “Stormwater Detention and Retention LID systems,” Invited, Journal of Urban Water Management.
233. Guo, J.C.Y. (2009). “Retrofitting Detention Basin for LID Design with a Water Quality Control Pool,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 135, No. 6.
234. Guo, J.C.Y. (2012). “Off-Stream Detention Design for Stormwater Management,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 138, No. 4.
235. Guo, J.C.Y. (2013). “Green Concept in Stormwater Management,” Journal of Irrigation and Drainage Systems Engineering, Vol. 2, No. 3, p. 114, doi:10.4172/2168-9768.1000114.
236. Guo, J.C.Y., and Cheng, J.Y.C. (2008). “Retrofit Stormwater Retention Volume for Low Impact Development (LID),” ASCE Journal of Irrigation and Drainage Engineering, Vol. 134, No. 6, pp. 872-876.
237. Guo, J.C.Y., and Clark, J. (2006). “Rational Volumetric Method for Off-line Storm Water Detention Design,” Journal of PB Network for Water Engineering and Management, Vol. 21, No. 3, Issue No. 64.
238. HEC HMS. (2005). “Hydrologic Analysis System,” Hydrologic Engineering Center, Corps of Engineers, Davis, CA.
239. HEC5. (1965). Hydraulic Charts for the Section of Highway Culverts, U.S. Department of Commerce, Bureau of Roads, Washington, DC.
240. Jones, J, Guo, J.C.Y., and Urbonas, B. (2006). “Safety on Detention and Retention Pond Designs,” Journal of Storm Water.
241. McCuen, R.H. (1998). Hydrologic Analysis and Design, Chapter 8, 2nd ed., Prentice Hall, New York.
242. Shueler, T.R., and Helfrich, M. (1989). “Design of Extended Detention Wet Pond System,” Design of Urban Runoff Quality Controls, edited by L.A. Roesner, B. Urbonas, and M.B. Sonnen, American Society of Civil Engineers, New York.
243. Urbonas, B., and Stahre, P. (1992). Stormwater Best Management Practices and Detention, Prentice Hall, Englewood Cliffs, NJ.
244. US EPA SWMM. (2005). Stormwater Management Model. http://www2.epa.gov/water-research/storm-water-management-model-swmm.
245. USWSCM. (2010). Urban Storm Drainage Design and Criteria, Volumes 1, 2, and 3, Urban Drainage and Flood Control District, Denver, CO
246. ASCE. (1994). “Design and Construction of Urban Stormwater Management System," American Society of Civil Engineers, Manuals and Reports of Engineering Practice No. 77, New York.
247. Guo, J.C.Y. (2012). “Off-Stream Detention Design for Stormwater Management," ASCE Journal of Irrigation and Drainage Engineering, Vol. 138, No. 4, pp. 371-376.
248. Guo, J.C.Y., and Clark, J. (2006). “Rational Volumetric Method for Off-Line Storm Water Detention Design," Journal of PB Network for Water Engineering and Management, Vol. 21, No 3, Issue No. 64.
249. Guo, J.C.Y., and Jones, J. (2010a). “Pinning Force during Closure Process at Blocked Pipe Entrance," ASCE Journal of Irrigation and Drainage Engineering, Vol. 136, No. 2, pp. 141-144.
250. Guo, J.C.Y., Jones, J., and Earles, A. (2010b). “Method of Superimposition for Suction Force on Trash Rack," ASCE Journal of Irrigation and Drainage Engineering, Vol. 136, No.11, pp. 781-785.
251. Guo, J.C.Y., Shih, H.M., and MacKenzie, K. (2012). “Stormwater Quality Control LID Basin with Micropool," ASCE Journal of Irrigation and Drainage Engineering, Vol. 138, No. 5.
252. Guo, J.C.Y., Urbonas, B., Mackenzie, K., and Lloyd, D. (2007). “Stormwater Computer Design Tools," Invited, Journal of Urban Water Management.
253. Jones, J, Guo, J.C.Y., and Urbonas, B. (2006). “Safety on Detention and Retention Pond Designs," Journal of Storm Water, Vol. 35.
254. Mendi, S. (2015). “Design of Micropool for Detention Basin System," Master Report, Department of Civil Engineering, University of Colorado Denver, Denver.
255. Pemberton, E.L., and Lara, J.M. (1971). A Procedure to Determine Sediment Deposition in a Settling Basin, Sedimentation Section, U.S. Bureau of Reclamation, Denver, CO.
256. Randle, T.J. (1984). User’s Guide to Computer Modeling of Settling Basins, U.S. Bureau of Reclamation (sedimentation and River Hydraulics section, Hydrology Branch), Denver, CO.
257. Skipwith, W., Denton, M., and Askew, M. (1990). “Closing the Floodgates,” ASCE Civil Engineering, Vol. 60, No. 7, pp. 54-55.
258. Tullis, J.P., Amanian, N., and Waldron, D. (1995). “Design of Labyrinth spillways,” ASCE Journal of Hydraulic Engineering, Vol. 121, No. 3, pp. 247-255.
259. UDFCD. (2010). Urban Stormwater Design Criteria Manual, Volumes 1 and 2, Urban Drainage and Flood Control District, Denver, CO.
260. Allred-Coonrod, J.E. (1994). “Safety Grates in Supercritical Channels,” Journal of Irrigation and Drainage Engineering, Vol. 120, No. 1, pp. 218-224.
261. CDOT. (2004). Drainage Design Manual, Colorado of Department of Transportation, Denver, CO.
262. Comport, B.C., Cox, A.L., and Thornton, C. (2010). “Performance Assessment of Grate Inlets for Highway Median Drainage,” research report submitted to Urban Drainage and Flood Control District, Denver, CO.
263. FHWA (Federal Highway Administration). (1971). “Debris Control Structures,” Hydraulic Engineering Circular No. 9 (HEC-9), FHWA-EPD-106.
264. Guo, J.C.Y. (2000). “Design of Grate Inlets with a Clogging Factor,” Advances in Environmental Research, Vol. 4, pp. 181-186.
265. Guo, J.C.Y. (2006). “Decay-Based Clogging Factor for Curb Inlet Design,” ASCE Journal of Hydraulic Engineering, Vol. 132, No. 11.
266. Guo, J.C.Y., and Jones, J. (2010). “Pinning Force during Closure Process at Blocked Pipe Entrance,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 136, No. 2, pp. 141-144.
267. Guo, J.C.Y., Jones, J., and Earles, A. (2010). “Method of Superimposition for Suction Force on Trash Rack,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 136, No. 11, pp. 781-785.
268. Guo, J.C.Y., McKenzie, K., and Mommandi, A. (2008). “Sump Inlet Hydraulics,” ASCE Journal of Hydraulic Engineering, Vol. 135, No. 1.
269. HEC-22. (2002). Urban Drainage Design Manual, US Department of Transportation, Federal Highway Administration, Washington, DC.
270. Jones, J, Guo, J.C.Y., and Urbonas, B. (2006). “Safety on Detention and Retention Pond Designs,” Journal of Storm Water.
271. Mays, L.W. (2001). Stormwater Collection Systems Design Handbook, McGraw Hill Publication Company, New York.
272. Weisman, R.N. (1989). “Model Study of Safety Grating for Culvert Inlet,” Journal of Transportation Engineering, Vol. 115, No. 2, pp. 130-138.
273. USWDCM. (2001). Urban Stormwater Design Criteria Manual, Urban Drainage and Flood Control District, Denver, CO
274. ASCE WEF. (1998). “Urban Runoff Quality Management,” Joint Task Force of the Water Environment Federation and the ASCE, WEF Manual of Practice No. 23 Alexandria VA and Reston, VA.
275. Athayde, D.N. (1976). “Best Management Practices (BMP),” Proceedings: Urban Stormwater Seminars, Water Quality Management Guide, WPD 03-76-04, U.S. Environmental Protection Agency.
276. Driscoll, E.D., DiToro, D., Gaboury, D., and P. Shelley (1989), “Methodology for Analysis of Detention Basins for Control of Urban Runoff Quality,” U.S. Environmental Protection Agency, Washington, DC, Report No. EPA440/5-87-001.
277. Einstein, H.A. (1965), “Final Report Spawning Grounds,” University of California, Hydraulic Engineering Lab.
278. EPA. (1983). “Results of the Nationwide Urban Runoff Program, Final Report,” U.S. Environmental Protection Agency, NTIS No. PB84-185545, Washington, DC.
279. EPA. (1986). “Methodology for Analysis of Detention Basins for Control of Urban Runoff Quality,” U.S Environmental Protection Agency, EPA440/5-87-001, September 1986.
280. Flaxman, E.M. (1972). “Predicting Sediment Yield in Western United States.” ASCE Journal of the Hydraulics Division, Vol. 98, No. HY12, pp. 2073-2085.
281. Grizzard, T.J., Randall, C.W., Weand, B.L., and Ellis, K.L. (1986). “Methodology for Analysis of Detention Basins for Control of Urban Runoff Quality,” U.S Environmental Protection Agency, Washington, DC, Repot No. EPA440/5-87-001.
282. Guo, J.C.Y. (2009). “Retrofitting Detention Basin for LID Design with a Water Quality Control Pool,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 135, No. 6, pp. 671-675.
283. Guo, J.C.Y. (2013). “Green Concept in Stormwater Management,” Journal of Irrigation and Drainage Systems Engineering, Vol. 2, No. 3, p. 114, doi:10.4172/2168-9768.1000114.
284. Guo, J.C.Y., and Cheng, J.Y.C. (2008). “Retrofit Stormwater Retention Volume for Low Impact Development (LID),” ASCE Journal of Irrigation and Drainage Engineering, Vol. 134, No. 6, pp. 872-876.
285. Guo, J.C.Y., Shih, H.M., and MacKenzie K. (2012). “Stormwater Quality Control LID Basin with Micropool,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 138, No. 5.
286. Guo, J.C.Y., and Urbonas, B. (1996). “Maximized Detention Volume Determined by Runoff Capture Rate,” ASCE Journal of Water Resources Planning and Management, Vol. 122, No. 1, pp. 33-39.
287. Guo, J.C.Y., and Urbonas, B. (2002). “Runoff Capture and Delivery Curves for Storm Water Quality Control Designs,” ASCE Journal of Water Resources Planning and Management, Vol. 128, No. 3, pp. 208-215.
288. Guo, J.C.Y., Urbonas, B., and MacKenzie, K. (2011). “The Case for a Water Quality Capture Volume for Stormwater BMP,” Journal of Stormwater.
289. Guo, J.C.Y., Urbonas, B., and MacKenzie K. (2014). “Water Quality Capture Volume for LID and BMP Designs,” ASCE Journal of Hydrologic Engineering, Vol. 19, No. 4, pp. 682-686
290. Pemberton, E.L., and Lara, J.M. (1971). “A Procedure To Determine Sediment Deposition in a Settling Basin,” Sedimentation Section, U.S. Bureau of Reclamation, Denver.
291. Tucker, L.S., Urbonas, B., Guo, J.C.Y. (1989). “Sizing a Capture Volume for Stormwater Quality Enhancement.” Flood Hazed News, Vol. 19, No.1.
292. Urbonas, B., Guo, J.C.Y., and Tucker, L.S. (1989). “Sizing a Capture Volume for Stormwater Quality Enhancement,” Flood Hazed News, Vol. 19, No. 1, pp. 1-9.
293. Urbonas, B., Rosener, L.A., and Guo, J.C.Y. (1996). “Hydrology for Optimal Sizing of Urban Runoff Treatment Control System.” Journal of Water Quality International, Vol. 1996, No. 1, pp. 30-33.
294. USWDCM. (2001). Urban Storm Water Design Criteria Manual, Urban Drainage and Flood Control District, Denver, CO.
295. Wischmeier, W.H., and Smith, D.D. (1960). “A Universal Soil-Loss Equation to Guide Conservation Farm Planning,” 7th International Congress of Soil Science, Madison, Wisconsin.
296. Blackler, G., and Guo, J.C.Y. (2012). “Field Test of Paved Area Reduction Factors Using a Storm Water Management Model and Water Quality Test Site,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 17, No. 8.
297. Blackler, G., and Guo, J.C.Y. (2013). “Paved Area Reduction Factors under Temporally Varied Rainfall and Infiltration,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 139, No. 2, pp. 173-179.
298. Booth, D.B., and Jackson, C.R. (1997). “Urbanization of Aquatic Systems: Degradation Thresholds, Stormwater Detention, and the Limits of Mitigation,” Journal of the American Water Resources Association, Vol. 22, No. 5, pp. 1-20.
299. Davis, A.P. (2007). “Field Performance of Bioretention: Water Quality,” Environmental Engineering Science, Vol. 24, No. 8, p. 1048.
300. Earles, T., Guo, J., MacKenzie, K., Clary, J., and Tillack, S. (2010). “A Non-Dimensional Modeling Approach for Evaluation of Low Impact Development from Water Quality to Flood Control,” Proceedings of the 2010 International Low Impact Development Conference, San Francisco, CA, pp. 362-371.
301. EPA. (1983). “Results of the Nationwide Urban Runoff Program,” Final Report, U.S. Environmental Protection Agency, NTIS No. PB84-185545, Washington, DC.
302. EPA. (2006). “National Recommended Water Quality Criteria,” U.S. Environmental Protection Agency, Office of Water, Washington, DC.
303. Guo, J.C.Y. (2007). “Stormwater Detention and Retention LID Systems,” Invited, Journal of Urban Water Management.
304. Guo, J.C.Y. (2008). “Runoff Volume-Based Imperviousness Developed for Storm Water BMP and LID Designs,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 134, No. 2.
305. Guo, J.C.Y. (2010). “Preservation of Watershed Regime for Low Impact Development Using (LID) Detention,” ASCE Journal of Engineering Hydrology, Vol. 15, No. 1.
306. Guo, J.C.Y. (2012). “Cap-Orifice as a Flow Regulator for Rain Garden Design,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 138, No. 2.
307. Guo, J.C.Y. (2013). “Green Concept in Stormwater Management,” Journal of Irrigation and Drainage Systems Engineering, Vol. 2, No. 3, p. 114.
308. Guo, J.C.Y., and Urbonas, B. (1996). “Maximized Detention Volume Determined by Runoff Capture Rate,” ASCE Journal of Water Resources Planning and Management, Vol. 122, No. 1.
309. Guo, J.C.Y., and Urbonas, B. (2002). “Runoff Capture and Delivery Curves for Storm Water Quality Control Designs,” ASCE Journal of Water Resources Planning and Management, Vol. 128, No. 3.
310. Guo, J.C.Y., Blackler, E.G., Earles, A., and MacKenzie, K. (2010). “Effective Imperviousness as Incentive Index for Stormwater LID Designs,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 136, No. 12.
311. Guo, J.C.Y., Kocman, S., and Ramaswami, A. (2009). “Design of Two-layered Porous Landscaping LID Basin,” ASCE Journal of Environmental Engineering, Vol. 145, No. 12.
312. Guo, J.C.Y., Urbonas, B., and MacKenzie, K. (2011). “The Case for a Water Quality Capture Volume for Stormwater BMP,” Journal of Stormwater.
313. Guo, J.C.Y., Urbonas, B., and MacKenzie, K. (2014). “Water Quality Capture Volume for LID and BMP Designs,” ASCE Journal of Hydrologic Engineering, Vol. 19, No. 4, pp. 682-686
314. Hsieh, C.H., and Davis, A.P. (2005). “Evaluation and Optimization of Bioretention Media for Treatment of Urban Storm Water Runoff,” Journal of Environmental Engineering, Vol. 131, No. 11, pp. 1521-1531.
315. Hunt, W.F., Jarrett, A.R., Smith, J.T., and Sharkey, L.J. (2006). “Evaluating Bioretention Hydrology and Nutrient Removal at Three Field Sites in North Carolina,” Journal of Irrigation and Drainage Engineering, Vol. 132, No. 6, pp. 600-608.
316. Kim, H., Seagren, E.A., and Davis, A.P. (2003). “Engineered Bioretention for Removal of Nitrate from Stormwater Runoff,” Water Environmental Research, Vol. 75, No. 4, pp. 335-367.
317. Kocman, S.M., Guo, J.C.Y., and Ramaswami, A. (2012). “Waste-Incorporated Subbase for Porous Landscape Detention Basin,” ASCE Journal of Environmental Engineering, Vol. 137, No. 10.
318. Lee, J.G., and Heaney, J.P. (2003). “Estimation of Urban Imperviousness and its Impacts on Storm Water Systems,” Journal of Water Resources Planning and Management, Vol. 129, No. 5, pp. 419-426.
319. Rossman, L.A. (2009). Storm Water Management Model User’s Manual Version 5.0, U.S. Environmental Protection Agency, Water Supply and Water Resources Division National Risk Management Research Laboratory, Cincinnati, OH.
320. SWMM5. (2009). Storm Water Management Model, US EPA, Cincinnati, OH.
321. Thompson, A.M., Paul, A.C., Balster, N.J. (2008). “Physical and Hydraulic Properties Engineered Soil Media for Bioretention Basins,” Transactions of the American Society of Agricultural and Biological Engineers, Vol. 51, No, 2, pp. 499-514.
322. UDFCD. (2010). Urban Storm Drainage Criteria Manual, Volume 3, Best Management Practices, Urban Drainage and Flood Control District, Denver, CO.
323. USWDCM. (2010). Urban Storm Drainage Criteria Manual, Volume 3, Best Management Practices, Urban Drainage and Flood Control District, Denver, CO.
324. Bouwer, H., Back, J.T., and Oliver, J.M. (1999). “Predicting Infiltration and Ground-water Mounds for Artificial Recharge,” ASCE Journal of Hydrologic Engineering, Vol. 4, No. 4, pp. 350-357.
325. Brooks, R.H., and Corey, A.T. (1964). “Hydraulic Properties of Porous Media,” Hydrologic Paper No. 3, Colorado State University, Ft. Collins, CO.
326. Ferguson, B.K. (1990). “Role of the Long-term Water Balance in Management of Storm Water Infiltration,” Journal of Environmental Management, Vol. 30, No. 3, pp. 221-233.
327. Griffin, D.M. Jr., and Warrington, R.O. (1988). “Examination of 2-D Groundwater Recharge Solution,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 114, No. 4, pp. 691-704.
328. Green, W.H., and Ampt, G.A. (1911). “Studies of Soil Physics, I: The Flow of Air and Water Through Soils,” Journal of Agriculture Science, Vol. 4, No. 1, pp. 1-24.
329. Guo, J.C.Y. (1998). “Surface-Subsurface Model for Trench Infiltration Basins,” ASCE Journal of Water Resources Management and Planning, Vol. 124, No. 5, pp. 280-284.
330. Guo, J.C.Y. (1999a). “Design of Circular Infiltration Basin under Water Mound Effects,” ASCE Journal of Water Resources Management and Planning.
331. Guo, J.C.Y. (1999b). “Application of Potential Flow Model to Water Mound under Infiltration Basin,” Journal of Water International, American Water Resources Association.
332. Guo, J.C.Y., and Hughes, W. (2001). “Runoff Storage Volume for Infiltration Basin,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 127, No. 3, pp. 170-174.
333. Hantuch, M.S. (1967). “Growth and Decay of Groundwater-Mounds in Response to Uniform Percolation,” Water Resources Research, Vol. 3, No. 1, pp. 227-234.
334. McDonald, M.G., and Harbaugh, A. (1984). “A Modular Three-Dimensional Finite-Difference Groundwater Flow Model,” U.S. Department of the Interior, USGS, National Center, Reston, VA.
335. Morel-Seytous, H.J., Miracapillo, C., and Abdulrazzak, M.J. (1990). “A Reductionist Physical Approach to Unsaturated Aquifer Recharge from a Circular Spreading Basin.” Water Resources Research, Vol. 26, No. 4, pp. 771-777.
336. Ortiz, N.V., Zachmann, D.W., McWhorter, D.B., and Sunada, D.K. (1979). “Effects of In-Transit Water on Groundwater Mounds beneath Circular and Rectangular Recharge Areas,” Water Resources Research, Vol. 15, No. 3, pp. 577-582.
337. Rastogi, A.K., and Pandy, S.N. (1998). “Modeling of Artificial Recharge Basins of Different Shapes and Effect on Underlying Aquifer System,” ASCE Journal of Hydrologic Engineering, Vol. 123, No. 3, pp. 62-68.
338. Shansai, A., and Sitar, N. (1991). “Method for Determination of Hydraulic Conductivity in Unsaturated Porous Media,” ASCE Journal of Irrigation and Drainage Engineering, Vol. 117, No. 1, pp. 64-78
339. Sumner, D.M., Rolston, D.E., and Marino, M.A. (1999). “Effects of Unsaturated Zone on Groundwater Mounding,” ASCE Journal of Hydrologic Engineering, Vol. 4, No. 1, pp. 65.
340. Swanee, P.K., and Ojha, C.S.P. (1997). “Ground-Water Mound Equation for Rectangular Recharge Area,” ASCE Journal of Irrigation and Drainage Engineering, pp. 215-217.
341. Amein, M., and Fang, C.S. (1970). “Implicit Flood Routing in Natural Channels,” ASCE Journal of Hydraulic Engineering Division, Vol. 96, No. HY12, pp. 2481-2500.
342. Bedient, P.B., and Huber, W.C. (1992). Hydrology and Floodplain Analysis, 2nd ed., Addison Wesley Publishing Company, New York.
343. Beuter, E.L., Gaebe, R.R., and Horton, R.E. (1940). “Sprinkled-Plat Runoff and Infiltration Experiments on Arizona Desert Soils,” Eos, Transactions American Geophysical Union, Vol. 21, pp. 550-558.
344. Chow, V.T. (1964). Handbook of Applied Hydrology, Chapters 17 and 21, McGraw-Hill Book Company, London.
345. Courant, R., Friedricks, O.H., and Lewy, H. (1928). “Uber die partiellen Differentialgleichungen der Mathematishcen Phisik,” Mathematical Annalen, Vol. 100, pp. 32-74.
346. DeVries, J.J., and MacArthur, R.C. (1979). “Introduction and Application of Kinematic Wave Routing Techniques Using HEC-1,” Training Document 10, Hydrologic Engineering Center, U.S. Army Corps of Engineers, Davis, CA.
347. Eagleson, P.S. (1970). Dynamic Hydrology, McGraw Hill, New York, pp. 344-346.
348. Fread, D.L. (1978). “National Weather Service Operation Dynamic Wave Model,” Verification of Mathematical and Physical Models in Hydraulic Engineering, Proceedings of 26th Annual Hydraulics Division, Special Conference, ASCE, College Park, MA.
349. Guo, J.C.Y. (1998). “Overland Flow on a Pervious Surface,” IWRA Journal of International Water, Vol. 23, pp. 91-96.
350. Henderson, F.M., and Wooding, R.A. (1964). “Overland Flow and Groundwater from a Steady Rainfall of Finite Duration,” Journal of Geophysical Research, Vol. 69, No. 8, pp. 39-67.
351. Holden, A.P., and Stephenson, D. (1988). “Improved Four-Point Solution of the Kinematic Equations,” Journal of Hydraulic Research, Vol. 26, No. 4, pp. 413-423.
352. Holden, A.P., and Stephenson, D. (1995). “Finite Difference Formulations of Kinematic Equations,” Journal of Hydraulic Engineering, ASCE, Vol. 121, pp. 423-426.
353. Horton, R.E. (1938). “The Interpretation and Application of Runoff Plot Experiments with Reference to Soil Erosion Problems,” Soil Science Society of America Journal, Vol. 3, pp. 340-349.
354. Huang, Y.H. (1978). “Channel Routing by Finite Difference Method,” ASCE Journal of Hydraulics Division, Vol. 104, No. 10, pp. 1379-1393.
355. Izzard, C.F. (1944). “The Surface Profile of Overland Flow,” Transactions, American Geophysical Union, Vol. 25, No. 6, pp. 959-968.
356. Izzard, C.F. (1946). “Hydraulics of Runoff from Developed Surfaces,” Proceedings of the Twenty-Sixth Annual Meeting of the Highway Research Board Held at Washington, DC. December 5-8, 1946, Highway Research Board Proceedings, Vol. 26, pp. 129-146.
357. Katz, D.M., Watts, F.J., and Burroughs, E.D. (1995). “Effects of Surface Roughness and Rainfall Impact on Overland Flow,” Journal of Hydraulic Engineering, ASCE, Vol. 121, No. 7, pp. 546-553.
358. Liggett, J.A., and Woohiser, D.A. (1967). “Finite Difference Solution for the Shallow Water Equations,” ASCE Journal of Engineering Mechanics Division, Vol. 93, No. 2, pp. 39-71.
359. Lighthill, M.H., and Whitham, G.B. (1955). “On Kinematic Waves, I, Flood Movement in Long Rivers,” Proceedings of the Royal Society of London, Series A, Vol. 229, pp. 281-316.
360. McCuen, R.H., Wong, S.L., and Rawls, W.J. (1984). “Estimating Urban Time of Concentration,” Journal of Hydraulic Engineering, ASCE, Vol. 110, No. 7, pp. 887-904.
361. Morgali, J.R. (1970). “Laminar and Turbulent Overland Flow Hydrographs,” Journal of Hydraulic Engineering, ASCE, Vol. 96, No, HY2, pp. 441-360.
362. Morgali, J.R., and Linseley, R.K. (1965). “Computer Analysis of Overland Flow,” Journal of Hydraulic Engineering, ASCE, Vol. 91, No. HY3, pp. 81-100.
363. Overton, D.E., and Meadows, M.E. (1976). Stormwater Modeling, Academic Press, New York.
364. Ponce, V.M., and Yevjevivh, V. (1978). “Muskingum-Cunge Method with Variable Parameters,” ASCE Journal of Hydraulics Division, Vol. 104, No. 2, pp. 1663-1667.
365. Preissmann, A. (1961). Propogation des intumescences dans les canaux et les riveres, I’e Congres de I’association Francaise de Culcule, Grenoble, France, pp. 433-442.
366. Schaake, J.C. Jr., Geyer, J.C., and Knapp, J.W. (1967). “Experimental Examination of the Rational Method,” ASCE Journal of Hydraulic Engineering, Vol. 93, No. HY6, pp. 353-370.
367. Singh, V.P., and Cruise, J.F. (1992). “Analysis of the Rational Formula Using a System Approach,” Catchment Runoff and Rational Formula, edited by B.C. Yen, Water Resources Publication, Littleton, CO, pp. 39-51.
368. Urban Highway Storm Drainage Model. (1983). “Inlet Design Program,” Volume 3, Federal Highway Administration, Report No. FHWA/RD-83/043.
369. USGS Open File Report 82-873. (1983). “Rainfall-Runoff Data from Small Watersheds in Colorado, October 1977 through September 1980,” USGS, Lakewood, CO.
370. Wooding, R.A. (1965). “A Hydraulic Model for a Catchment-Stream Problem,” Journal of Hydrology, Vol. 3, pp. 254-267.
371. Woolhiser, D.A., and Liggett, J.A. (1967). “Unsteady One-dimensional Flow over a Plane—The Rising Hydrograph,” Water Resources Research, Vol. 3, No. 3, pp. 753-771.
372. Yen, B.C., and Chow, V.T. (1974). Experimental Investigation of Watershed Surface Runoff, Hydraulic Engineer Series, No. 29, Department of Civil Engineering, University of Illinois at Urbana-Champaign.
373. ASCE. (1994). “Design and Construction of Urban Stormwater Management System”, American Society of Civil Engineers, Manuals and Reports of Engineering Practice No, 77, Chapter 1.
374. Bedient, P.B., and Huber, W.C. (1992). Hydrology and Floodplain Analysis, 2nd ed., Addison-Wesley Publishing Company, Inc, New York.
375. EPA Storm Water Management Model. (1983). “Inlet Design Program,” Volume 3, Federal Highway Administration, Report No. FHWA/RD-83/043, December.
376. Guo, J.C.Y. (2004). “Hydrology-Based Approach to Storm Water Detention Design Using New Routing Schemes,” ASCE Journal of Hydrologic Engineering, Vol. 9, No. 4, pp. 333-336.
377. McCuen, R.H. (1998). Hydrologic Analysis and Design, Chapter 8, 2nd ed., Prentice Hall, New York.
378. Puls, L.G. (1928). “Construction of Flood Routing Curves,” House Document 185, U.S. 70th Congress, First Session, Washington, DC.
379. US Army Corps of Engineers. (1979). “Introduction and Application of Kinematic Wave Routing Technique Using HEC-1,” Training Document 10, May.