A physical model to study the effects of nozzle design on dispersed two-phase flows in a slab mold casting ultra-low-carbon steels

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 49, Issue 2, 2018, Pages 812-830

  Salazar Campoy, María M ^a   Morales, R D ^b   Najera Bastida A ^c   Calderón Ramos, Ismael ^d   Cedillo Hernández, Valentín ^e   Delgado Pureco, J C ^f  

^a UNIVERSIDAD DE SONORA   (Mexico)

^b INSTITUTO POLITÉCNICO NACIONAL   (Mexico)

^c INSTITUTO POLITÉCNICO NACIONAL   (Mexico)

^d UNIVERSIDAD AUTÓNOMA DE COAHUILA   (Mexico)

^e Peñoles Mining Co   (Mexico)

^f Arcelor Mittal Steel   (Mexico)

Author keywords

[No Author keywords available]

Indexed keywords

ARGON; KINETIC ENERGY; KINETICS; LIQUIDS; LOW CARBON STEEL; MOLDS; NOZZLE DESIGN; PARTICLE SIZE ANALYSIS; STRAIN RATE; TURBULENT FLOW; VELOCIMETERS; VELOCITY MEASUREMENT;

DIMENSIONLESS ANALYSIS; DISPERSED TWO-PHASE FLOWS; MENISCUS VELOCITIES; PARTICLE IMAGE VELOCIMETRIES; SIMPLE EXPRESSION; TURBULENT KINETIC ENERGY; ULTRA LOW CARBON STEEL; ULTRASOUND PROBES;

TWO PHASE FLOW;

EID: 85046944073     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-018-1181-3     Document Type: Article

References (40)

1. R. Sánchez-Pérez, R.D. Morales, L. García-Demedices, J. Palafox-Ramos, and M. Díaz-Cruz: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 85–99.
2. J. Knoepke, M. Hubbard, J. Kelly, R. Kittridge, and J. Lucas: Steelmaking Conf. Proc., ISS, Warrendale, PA, 1994, vol. 77, pp. 381–88.
3. H. Yamamura, Y. Mizukami, and K. Misawa: ISIJ Int., 1996, vol. 36 (Suppl.), pp. S223–S226.
4. H. Esaka, Y. Kuroda, K. Shinozuka, and M. Tamura: ISIJ Int., 2004, vol. 44, pp. 682–90.
5. Z. Wang, K. Mukai, and I. Jae Lee: ISIJ Int., 1999, vol. 39, pp. 553–62.
6. G. Kaptay and K.K. Kelemen: ISIJ Int., 2001, vol. 41, pp. 305–07.
7. J. Sengupta, B.G. Thomas, H.-J. Shin, and S.-H. Kim: AISTech 2006 Proc., 2006, vol. 1, pp. 903–14.
8. W.H. Emling and T.A. Waugaman: Steelmaking Conf. Proc., ISS, Warrendale, PA, 1994, vol. 77, pp. 371–79.
9. Y. Mizuno and M. Iguchi: ISIJ Int., 2001, vol. 41 (Suppl.), pp. S56–S60.
10. T. Szirtes: Applied Dimensional Analysis and Modeling, McGraw-Hill Book Company, New York, 1997, pp. 1–787.
11. M. Iguchi, H. Ueda, and T. Uemura: Int. J. Multiphase Flows, 1995, vol. 21, pp. 861–73.
12. H. Bai and B.G. Thomas: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 253–67.
13. H. Bai and B.G. Thomas: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 269–84.
14. Z. Liu, B. Li, and M. Jiang: Metall. Mater. Trans. B, 2014, vol. 45B, pp. 675–97.
15. Y. Miki and S. Takeuchi: ISIJ Int., 2003, vol. 43, pp. 1548–55.
16. E. Torres-Alonso, R.D. Morales, S. Garcia-Hernández, and J. Palafox-Ramos: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 598– 97.
17. E. Torres-Alonso, R.D. Morales, and S. Garcia-Hernández: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 675–90.
18. Z. Liu, L. Li, F. Qi, B. Li, M. Jiang, and F. Tsukihashi: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 406–20.
19. I. Calderón-Ramos and R.D. Morales: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 1314–25.
20. I. Calderón-Ramos, R.D. Morales, and María. Salazar-Campoy: Steel Res. Int., 2016, vol. 87, pp. 1154–67.
21. José. de J. Barreto, R.D. Morales, S. García-Hernández, A. Nájera-Bastida, and I. Calderón-Ramos: Steel Res. Int., 2015, vol. 86, pp. 517–27.
22. S. García-Hernández, J. de J. Barreto, R.D. Morales, and H. Arcos-Gutiérrez: ISIJ Int., 2013, vol. 53, pp. 809–17.
23. R. Sánchez-Pérez, R.D. Morales, M. Díaz-Cruz, O. Olivares-Xometl, and J. Palafox-Ramos: ISIJ Int., 2003, vol. 43, pp. 637–46.
24. M. Iguchi and O.J. Ilegbusi: Modeling Multiphase Materials Processes, 1st ed., Springer, New York, 2011, pp. 95–174.
25. J.C. Delgado-Pureco: Arcelor Mittal Steel, La´zaro Cárdenas, Michoacán.
26. ImageJ-1.49 (Image Processing and Analysis in Java): http://imagej.nih.gov/ij/index.html. Accessed 10 Dec 2015.
27. C. Crowe, M. Sommerfeld, and Y. Tsuji: Multiphase Flows with Droplets and Particles, 1st ed., CRC Press LLC, New York, 1998, pp. 40–44.
28. M. Iguchi and N. Kasai: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 453–60.
29. D.C. Wilcox: Turbulence Models for CFD, DCW Industries, La Cañada Flintridge, 2000, pp. 10–13.
30. C. Martinez-Bazán: Ph.D. Thesis, University of California at San Diego, San Diego, 1998.
31. G.M. Evans, G.D. Rigby, T.A. Honeyands, and Q.L. He: Chem. Eng. Sci., 1999, vol. 54, pp. 4861–67.
32. F. Oeters: Metallurgy of Steelmaking, Stahl und Eisen, Berlin, 1989, pp. 167–80.
33. E.T. Turkdogan: Fundamentals of Steelmaking, The Institute of Materials, London, 1996, pp. 125–36.
34. A. Ghosh: Secondary Steelmaking, CRC Press, London, 2001, pp. 225–52.
35. R. Clift, J.R. Grace, and M.E. Weber: Bubbles, Drops and Particles, Academic Press, New York, NY, 1978, pp. 26–29 and 172.
36. Z. Wang, K. Mukai, Z. Ma, M. Nishi, H. Tsukamoto, and Feng. Shi: ISIJ Int., 1999, vol. 39, pp. 795–803.
37. E. Sven, K. Timmel, N. Shevchenko, M. Röder, M. Anderhuber, and P. Gardin: Experimental Investigation of Liquid Metal Two-Phase Flows in a Continuous Casting Model, 8th ECCC, 2015.
38. K. Timmel, N. Shevchenko, M. Roder, M. Anderhuber, P. Gardin, S. Eckert, and G. Gerbeth: Metall. Mater. Trans. B, 2015, vol. 36B, pp. 700–10.
39. R. Chaudhary, C. Ji, and B.G. Thomas: CCC Report No. 201013, Aug. 12, 2010.
40. S. Uno and R.C. Kitner: AIChE J., 1956, pp. 420–25.