Rating of electric power cables in unfavorable thermal environment

Rating of Electric Power Cables in Unfavorable Thermal Environment

Volumn , Issue , 2010, Pages 1-326

  Anders, George J ^a  

^a Ontario Hydro Research Div   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85041052842     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1109/9780471718741     Document Type: Book

References (175)

1. AEIC CS 1-90, (1990) “Specifications for Impregnated Paper-Insulated, Metallic-Sheathed Cable, Solid Type,” 11th edition.
2. AEIC CS2-90, (1990) “Specifications for Impregnated Paper and Laminated Paper Polypropylene Insulated Cable, High-Pressure Pipe Type,” 5th edition.
3. AEIC CS3-90, (1990) “Specifications for Impregnated Paper-Insulated, Metallic-Sheathed Cable, Low-Pressure Gas-Filled Type,” 3rd edition.
4. AEIC CS4-93, (1993) “Specifications for Impregnated-Paper-Insulated Low and Medium Pressure Self-Contained Liquid Filled Cable,” 8th edition .
5. AEIC CS5-94, (1994) “Specifications for Cross-linked Polyethylene Insulated Shielded Power Cables Rated 5 Through 46 kV,” 10th edition.
6. AEIC CS6-87, (1987) “Specifications for Ethylene Propylene Rubber Insulated Shielded Power Cables Rated 5 Through 69 kV,” 5th edition.
7. AEIC CS7-93, (1993) “Specifications for Cross-linked Polyethylene Insulated Shielded Power Cables Rated 69 Through 138 kV,” 3rd edition.
8. AEIC CS8-00 (2000) “Specifications for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV,” 1st edition.
9. AEIC CS31-84, (1984) “Specifications for Electrically Insulated Low Viscosity Pipe Filling Liquids for High-Pressure Pipe-Type Cable,” 2nd edition.
10. AEIC Gl-68, (1968) “Guide for Application of AEIC Maximum Insulation Temperatures at the Conductor for Impregnated-Paper-Insulated Cables,” 2nd edition.
11. AEIC G2-72, (1972) “Guidefor Electrical Tests ofCable Joints 138 kV and Above,” 1 st edition.
12. AEIC G4-90 (1990) “Guide for Installation of Extruded Dielectric Insulated Power Cable Systems Rated 69 kV Through 138 kV,” 1st edition.
13. AEIC G5-90, (1990) “Underground Extruded Power Cable Pulling Guide,” 1 st edition.
14. AEIC G6-95, (1995) “Guide for Establishing the Maximum Operating Temperatures of Extruded Dielectric Insulated Shielded Power Cables,” 1st edition.
15. AEIC G7-90, (1990) “Guide for Replacement and Life Extension of Extruded Dielectric 5-35 kV Underground Distribution Cables,” 1st edition.
16. AEIC G8-95, (1995) “Guide for an Electric Utility Quality Assurance Program for Extruded Dielectric Power Cables, " 1st edition.
17. Anders, G.J. (1997), Rating of Electric Power Cables-Ampacity Calculations for Transmission, Distribution and Industrial Applications, IEEE Press, New York, McGraw-Hill, (1998).
18. ANSI/IEEE Standard 75 (1988), “Application of Sheath-Bonding Methods for Single Conductor Cables and the Calculation of Induced Voltages and Currents in Cable Sheaths.”
19. Baudoux, A., Verbisselet, J., Fremineur, A. (1962) “Etude des Regimes Thermiques des Machines Electriques par des Modeles Analogiques, Application aux Cables et aux Transformateurs,” Rapport CIGRE, No. 126.
20. Buller, F.H. (1951), “Thermal Transients on Buried Cables,” Trans. Amer. Inst. Elect. En-grs, Vol. 70, pp. 45-52.
21. CIGRE (1972), “Current Ratings of Cables for Cyclic and Emergency Loads. Part 1. Cyclic Ratings (Load Factor less than 100%) and Response to a Step Function,” Electra, No. 24, October 1972, pp. 63-96.
22. CIGRE (1976), “Current Ratings of Cables for Cyclic and Emergency Loads. Part 2. Emergency Ratings and Short Duration Response to a Step Function,” Electra, No. 44, Jan. 1976, pp. 3-16.
23. CIGRE (1986), “Current Ratings of Cables Buried in Partially Dried Out Soil. Part I: Simplified Method that Can be Used with Minimal Soil Information (100% Load Factor),” Electra, No. 104, pp. 11-22.
24. Goldenberg, H., (1957), “The Calculation of Cyclic Rating Factors for Cables Laid Direct or in Ducts,” Proc. IEE, Vol. 104, Pt. C, pp. 154-166.
25. Goldenberg, H., (1958), “The Calculation of Cyclic Rating Factors and Emergency Loading for One or More Cables Laid Direct or in Ducts,” Proc. IEE, Vol. 105, Pt. C, pp. 46-54.
26. Goldenberg, H., (1967), “Thermal Transients in Linear Systems with Heat Generation Linearly Temperature-Dependent: Application to Buried Cables,” Proc. IEE, Vol. 114, pp. 375-377.
27. Goldenberg, H. (1971), “Emergency Loading of Buried Cable with Temperature-Dependent Conductor Resistance,” Proc. IEE, Vol. 118, pp. 1807-1810.
28. IEC Standard 60287 (1969, 1982, 1994), “Calculation of the Continuous Current Rating of Cables (100% load factor),” 1st edition 1969, 2nd edition 1982, 3rd edition 1994-1995.
29. IEC Standard 60853-1 (1985),” Calculation of the Cyclic and Emergency Current Ratings of Cables. Part 1: Cyclic Rating Factor for Cables up to and Including 18/30 (36) kV” Publication 853-1.
30. IEC Standard 60853-2 (1989), “Calculation of the Cyclic and Emergency Current Ratings of Cables. Part 2: Cyclic Rating Factor of Cables Greater than 18/30 (36) kV and Emergency Ratingsfor Cables of All Voltages,” Publication 853-2.
31. IEC Standard 601042 (1991), “A method for Calculating Reduction Factors for Groups of Cables in Free Air, Protectedfrom Solar Radiation .”
32. IEEE (1994), Standard 835, “IEEE Standard-Power Cable Ampacity Tables,” IEEE Press, New York.
33. Morello, A. (1958) “Variazioni Transitorie die Temperatura Nei Cavi per Energia,” Elettrotecnica, Vol. 45, pp. 213-222
34. Neher, J.H., and McGrath, M.H. (1957), “Calculation of the Temperature Rise and Load Capability of Cable Systems,” AIEE Trans., Vol. 76, Part 3, pp. 755-772.
35. Neher, J.H. (1964), “The Transient Temperature Rise of Buried Power Cable Systems,” IEEE Trans., Vol. PAS-83, pp. 102-111.
36. Van Valkenburg, M.E. (1964), Network Analysis, Prentice-Hall Inc., Englewood Cliffs, NJ
37. Van Wormer, F.C. (1955), “An Improved Approximate Technique for Calculating Cable Temperature Transients,” Trans. Amer. Inst. Elect. Engrs, Vol. 74, Pt. 3, pp. 277-280.
38. Wollaston, F.O. (1949), “Transient Temperature Phenomena of 3 conductor cables,” AIEE Trans., Vol. 68, Pt. 2, pp. 1248-1297.
39. Anders, GJ. (1997), “Rating of Electric Power Cables: Ampacity Computations for Transmission, Distribution and Industrial Applications,” IEEE Press, New York, McGraw-Hill, New York (1998).
40. Anders, GJ., and Brakelmann, H. (1999a), “Cable Crossings-Derating Considerations. Part I- Derivation of the Derating Equations,” IEEE Trans. on Power Delivery, Vol. PWRD-13, No.4, July 1999, pp. 709-714.
41. Anders, G.J., and Brakelmann, H. (1999b), “Cable Crossings-Derating Considerations. Part II- Example of Derivation of the Derating Curves,” IEEE Trans. on Power Delivery, Vol. PWRD-13, No.4, July 1999, pp. 715-720.
42. Brakelman, H., and Anders, GJ. (2004b), “Increasing Ampacity for Cables by an Application ofVentilated Pipes,” submitted for publication in IEEE Transactions on Industry Applications.
43. Brakelmann, H. (1980), “Lateralkühlung von Hochspannungskabeln,” etz-Archiv. pp. 7786
44. Brakelmann, H. (1985), Belastbarkeiten der Energiekabe I, VD E-Verlag, Berlin.
45. Brakelmann, H. (1989), Energietechnikprogrammiert, VDE-Verlag, Berlin/Offenburg.
46. Brakelmann, H. (1995), “EMV-Maßnahmen für Drehstrom-Einleiterkabel,” El. Wirtsch., pp. 926-930.
47. Brakelmann, H. (1996), “Magnetfeldreduktion durch Zusatzleiter in Energiekabeltrassen,” El. wirtsch, pp. 274-279.
48. Brakelmann, H. (1998) “Kompensationsleiter im Muffenbereich von Energiekabeln,” Bull. d. SEV, pp. 31-35
49. Brakelmann H. (1999a), “Hydraulische Kaskadenschaltung für Bündelgekülte Einleiterkabel,” etz, H15, pp. 48-51.
50. Brakelmann H. (1999b), “EMC Measures for Underground Power Cables,” Paper BPT99-234-51 presented at the IEEE Power Tech '99 Conference, Budapest, Hungary, Aug. 29-Sept. 2, 1999.
51. Brakelmann, H. (1999c), “Reinforcement of Power Cables crossing Thermally Unfavourable Regions,” ETEP, no.3, 1999.
52. Brakelmann, H. (2000), “Autarke Energieversorgung von Verbrauchem in Hochspannungsk-abeltrassen,” BuIL SEV 93, H7, pp. 32-36.
53. Brakelman, H., and Anders, G.J. (2004a), “Increasing Ampacity for Cables Crossing Thermally Unfavorable Regions,” accepted for publication in IEEE Transactions on Power Delivery.
54. Bucea, G., and Kent, H. (1998), “Shielding Techniques to Reduce Magnetic Fields Associated with Underground Power Cables,” CIGRE-Report 21-201.
55. Haubrich, HJ. (1973), “Belüftete Kabelkanäle für unterirdische Hochleistungsübertragung,” ETZ-A, pp. 147-152
56. Heinhold, L. (1987), Kabel und Leitungen für Starkstrom, Siemens AG, Berlin/München.
57. Holman, J.P. (1990), Heat Transfer, McGraw-Hill, New York.
58. IEC Standard. (1985), “Calculation of the Cyclic and Emergency Current Ratings of Cables. Part I: Cyclic Rating Factor for Cables up to and Including 18/30 (36) kV,” Publication 853-1.
59. IEC Standard. (1989), “Calculation of the Cyclic and Emergency Current Ratings of Cables. Part 2: Cyclic Rating Factor of Cables Greater than 18130 (36) kV and Emergency Ratings for Cables of All Voltages,” Publication 853-2.
60. IEC Standard 60287, Part 2-1 (1994), “Calculation of thermal resistances”.
61. Ihle, C. (1911), “Lüftungs- und Raumheizung, Bd. 3,” Werner-Verlag, Düsseldorf
62. Incropera, F.P., and De Witt, D.P. (1990), Introduction to Heat Transfer, Wiley, New York.
63. Morgan, V.T. (1982), “The Thermal Rating of Overhead-Line Conductors, Part 1. The Steady-State Thermal Model,” Electric Power Systems Research, 5, pp. 119-139.
64. Ozisik, M.N. (1985), Heat Transfer. A Basic Approach, McGraw-Hill, Singapore.
65. Pommerenke, D., and Shen, J. (1993), “Elektromagnetische Verträglichkeit von Kabelnetzen,” Annual report Inst. f.
66. Weedy, B.M. (1988), Thermal Design of Underground Systems, Wiley, Chichester, UK.
67. Williams, JA. (1991), “Distributed Fiber Optic Temperature Monitoring Results on 69 kV XLPE Cable in Duct,” IEEE PES, Insulated Conductor Committee, Minutes of the 101 Meeting, Scottsdale, Arizona, April 20-23, 1991, Appendix 7-D-1.
68. Abdel Aziz, E.M., Zahab, A., and Kassem, A.A.E. (1986), “Prediction and Elimination of Hot Spots at the Crossing Regions of H.V. Cables,” IEEE Transactions on Power Delivery, Vol. 3 No. 3, July 1988, pp. 845-849. Also presented at the 2nd International Conference on Power Cables and Accessories, London, UK, Nov. 26-28, pp. 227-231.
69. Anders, GJ. (1997), Rating of Electric Power Cables: Ampacity Computations for Transmission, Distribution and Industrial Applications, IEEE Press, New York.
70. Anders, GJ., and Brakelmann, H. (1999a), “Cable Crossings-Derating Considerations. Part I- Derivation of the Derating Equations,” IEEE Trans. on Power Delivery, Vol. PWRD-13, No.4, July 1999, pp. 709-714.
71. Anders, GJ., and Brakelmann, H. (1999b), “Cable Crossings-Derating Considerations. Part II- Example of derivation of the derating curves,” IEEE Trans. on Power Delivery, Vol. PWRD-13, No.4, July 1999, pp. 715-720.
72. Anders, GJ., and Dorison, E. (2004), “Derating Factors for Cable Crossings with Considerations of Longitudinal Heat Flow in Cable Screen,” IEEE Transactions on Power Delivery, Vol. 19, No. 3, July 2004, pp. 926-932.
73. Brakelmann, H. (1985), Belastbarkeiten der Energiekabe, 1, VDE-Verlag, Berlin.
74. Brakelmann, H., and Sahin, M. (1999), “Transient temperature rise of cable crossings,” ETAP, Vol. 8, No. 3, pp. 217-220.
75. Dorison, E. (2003), “Cable Crossings,” In Proceedings of Jicable '03 meeting, Versailles, June France, 2003.
76. IEC Standard 228 (1978) “Conductors of Insulated Cables,” Second edition. First Supplement (1982).
77. IEC Standard 60287, Part 2-1 (1994), “Calculation of thermal resistances”.
78. IEC Standard, 60853 (1989), “Calculation of the Cyclic and Emergency Current Ratings of Cables. Part 2: Cyclic Rating Factor of Cables Greater than 18/30 (36) kV and Emergency Ratings for Cables of All Voltages,” Publication 853-2.
79. Imajo, T., Fukagawa H., and Itoh, T. (1986), “Thermal Interference in Underground Cable Heat Dissipation by Steam Pipes and its Prevention,” paper presented at the 2nd International Conference on Power Cables and Accessories, London, UK, Nov. 26-28, 1986, pp. 221-226.
80. Iwata, Z., Sakuma, S., Dam-Andersen M., and Jacobsen E. (1992), “Heat Pipe Local Cooling System Applied for 145 kV Transmission Lines in Copenhagen,” IEEE Transactions on Power Delivery, Vol. 7, No. 2, April 1992, pp. 767-775. A companion paper “Installation and Supervision of 145 kV Cables in Copenhagen City,” was presented at the 1990 CI-GRE session, paper No. 21-204.
81. Orton, H., MacPhail, A., and Buchholtz, V. (1996), “Elevated Temperature Operation-A Precautionary Note,” IEEE PES, Insulated Conductor Committee, Minutes of the 99th Meeting, Houston Texas, April 14-17, 1996, Appendix 5-K-1.
82. Thevenon, H., and Couqet, J.M. (1999), “Potential Overheating in the Event of a Cable Crossing,” Proceedings of Jicable’99 meeting in Versailles, France, June 1999, pp. 230-234.
83. Abdel-Hadi, O.N. (1978), Flow of Heat and Water around Underground Power Cables, Ph.D. thesis, University of California at Berkeley.
84. AlEE (1960), “Soil Thermal Characteristics in Relation to Underground Power Cables,” Committee report, AlEE Transactions, Summer Meeting, pp. 792-856.
85. Anders, GJ. (1990), Probability Concepts in Electric Power Systems, Wiley, New York.
86. Anders, GJ., Foty, M., and Croall, S. (1988a), “Cable Environment Analysis and Probabilistic Approach to Cable Rating,” IEEE Transactions on Power Delivery, Vol. PWRD-5, No.3, pp. 1628-1633.
87. Anders, GJ., Krpan, M.M., Roiz, J, and Chaaban, M. (1988b) “Delaying Investments in Transmission Facilities Through Cable Uprating,” in Proceedings of the 1988 CIGRE Meeting, Paris, France, September 1988, Section 37-08.
88. Anders, GJ., and Radhakrishna, HJ. (1988), “Computation on the Temperature Field and Moisture Content in the Vicinity of Current Carrying Underground Power Cables,” IEE Proceedings, Part C, Vol. 153, No.1, pp. 51-62.
89. ASTM C518-67 (1967), American Society for Testing of Materials, Philadelphia. Chu, F.Y., Radhakrishna, H.S., and Steinmanis, IE. (Eds.) (1981), Underground Cable Thermal Backfill, Pergamon Press Toronto.
90. El-Kady, M. (1982), “Optimization of Power Cable and Thermal Backfill Configurations,” IEEE Transactions on Power Apparatus and Systems, Vol. PAS-101, No. 12, pp. 4681-4688.
91. El-Kady, M.A., Chu, F.Y., Radhakrishna, H., Horrocks, D.J., and Ganton, R. (1984), “A Probabilistic Approach to Power Cable Thermal Analysis and Ampacity Calculation,” IEEE Transactions on Power Delivery, Vol. PAS-103, pp. 2735-2740.
92. Fink, L.H. (1954), “Control of the Thermal Environment of Buried Cable Systems,” AlEE Transactions on Power Apparatus and Systems, Vol. 73, pp. 406-412.
93. Fink, L.H. (1965), “Evaluation ofSoil Thermal Characteristics,” IEEE Transactions on Power Apparatus and Systems, Vol. PAS-84, No. 9, pp. 807-814.
94. Fink, L.H., and Smerke, JJ. (1958), “Control of the Thermal Environment of Buried Cables Systems, Part II,” AlEE Transactions on Power Apparatus and Systems, Vol. 77, pp. 161-168.
95. Groeneveld, G.J., Snijders, A.L., Koopmans, G., and Vermeer, J. (1984), “Improved Method to Calculate the Critical Conditions for Drying Out Sandy Soils Around Power Cables,” lEEProceedings, Vol. 131, Part C, No. 2, pp. 42-53.
96. IEEE Task Force on Soil Thermal Resistivity: Compaction of Cable Trench Backfill (1966), IEEE/PES Winter Meeting, Conference paper 31 CP 66-75.
97. IEEE 442-1991, reaffirmed 2003, “Guide for Soil Thermal Resistivity Measurements.”
98. Mason, V.V., and Kurtz, M. (1952), “Rapid Measurement of the Thermal Resistivity of Soil,” in AlEE Transactions, Summer Meeting, pp. 570-577.
99. Neher, J.H., and McGrath, M.H. (1957), “The Calculation of the Temperature Rise and Load Capability of Cable Systems,” AlEE Transactions, Vol. 76, Part 3, pp. 752-772.
100. Radakrishna, H.S. (1981). “Soil Thermal Resistivity and Thermal Stability Measuring Instrument,” Report prepared by Ontario Hydro Research Division for Electric Power Research Institute, EPRI EL-2128.
101. Saleeby, K.E., Black, W.Z., and Hartley, J.G. (1979), “Effective Thermal Resistivity for Power Cables Buried in Thermal Backfill,” IEEE Transactions on Power Apparatus and Systems, Vol. PAS-98, pp. 2201-2214.
102. Schmill, J.V. (1967), “Variable Soil Thermal Resistivity-Steady State Analysis,” IEEE Transactions on Power Apparatus and Systems, Vol. PAS-86, pp. 215-223.
103. Shannon, W.L., and Wells, W.A. (1947), “Tests for Thermal Diffusivity of Granular Materials,” in American Society for Testing Materials, 15th Annual Meeting, June 1947.
104. Stolpe, J. (1969), “Soil Thermal Resistivity Measured Simply and Accurately,” in IEEE Underground Conference, Vol. 89, pp. 297-304.
105. Thornthwaite, C.W. (1948), “An Approach Toward a Rational Classification of Climate,” Geographical Review, Vol. 38.
106. Wiedemann (1888), Annalen Physik, ed. by A.L.E.F. Schleirmacher, Vol. 34.
107. Vassallo, D.G. (1969), “The Influence of Climatic Conditions on the Moisture Content of Cable Backfills,” Ontario Hydro Research Division Report, No. E69-9-K, February 1969.
108. Anders G J. (1997), Rating of Electric Power Cables. Ampacity Computations for Transmission, Distributions, and Industrial Applications. IEEE Press Power Engineering Series. IEEE Press, New York; McGraw-Hill, New York, 1998.
109. Anders, GJ., Napieralski, A., Orlikowski M., and Zubert M. (2003) “Advanced Modeling Techniques for Dynamic Feeder Rating Systems,” IEEE Transactions on Industry Applications, Vol. 39, No. 3, pp. 619-626.
110. Balog, G.E., Kaldhussaeter, E., and Nerby, T.I. (2000), “Cable Temperature Monitoring,” in Proceedings of IEEE Insulated Conductors Meeting, St. Petersburg, Florida.
111. Brakelmann, H. (1986), “Kabelbelastbarkeitals Funktion der Tagelastgangkennlinie,” Bull. SEV, pp. 767-771.
112. Brakelmann, H. (1989), Balastbarkeiten der Energiekabel-Berechnungsmetoden und Parameteranalysen, VDE-Verlag, Berlin/Offenburg.
113. Brakelmann, H. (2003), “Loss Determination for Long Three-Phase High-Voltage Submarine Cables,” ETEP, pp. 193-198.
114. Brakelmann, H. (1995a), “Kabelbelastbarkeit bei Berücksichtigung von Tages und Wochen-lastzyklen,” Elektrizitästwirtschaft, Jg. 94, Heft 7, pp. 368-372.
115. Brakelmann, H. (1995b), “Kabelbelastbarkeit im Unbeliifteten Tunnel,” Elektrizitästwirtschaft, Jg. 94, Heft 26, pp. 368-372.
116. Brakelmann, H., and Anders, GJ. (2004), “Improvement in Cable Rating Calculations by Consideration of Dependence of Losses on Temperature,” IEEE Transactions on Power Delivery, Vol. 19, No. 3, pp. 919-925.
117. Brent, R.P. (1973), Algorithms for Mineralization without Derivatives, Prentice-Hall, Engle-wood Cliffs, NJ.
118. Cox, H.N., and Coates, R. (1965), “Thermal Analysis of Power Cables in Soils of Temperature-Responsive Thermal Resistivity,” Proc. IEE S, pp. 2275-2283.
119. Douglass, D.A., Lawry, D.C., Edris, A., and Bascom., E.C. (2000), “Dynamic Thermal Ratings Realize Circuit Load Limits,” IEEE Computer Applications in Power, Vol. 13, No. 1, pp. 38-44.
120. Gear, C.W. (1971), Numerical Initial Value Problems in Ordinary Differential Equations, Prentice-Hall, Englewood Cliffs, N.J.
121. IEC 287-1-1 (1994), “Electric Cables-Calculation of the Current Rating-part I: Current Rating Equations (100% Load Factor) and Calculations of Losses-Section 1: General,” IEC Publication 60287.
122. IEC 287-2-1 (1994), “Electric cables-Calculation of the Current Rating-Part II: Current Rating Equations (100% Load Factor) and Calculations of Thermal Resistance,” IEC Publication 60287.
123. Neher J.H. (1953), “Procedures for Calculating the Temperature Rise of Pipe Cable and Buried Cables for Sinusoidal and Rectangular Loss Cycles,” AIEE Transactions, Vol. 72, Part III, pp. 541-545.
124. Neher, JH., and McGrath, M.H. (1957), “The Calculation of the Temperature Rise and Load Capability of Cable Systems,” AIEE, Trans. Vol. 76, Pt. III, pp. 752-772.
125. Nelson, RJ. (1988), “Computer Techniques Enhance Cable Ratings,” Transmission and Distribution, July, pp. 52-60.
126. Pragnell, R.G., Gaspari, R., and Larsen, S.T. (1999), “Real Time Thermal Rating ofHV Cables,” in Proceedings IEEE Insulated Conductors Meeting, St. Petersburg, Florida, 2000.
127. U.S. Department of Energy (1978), “The Design and Testing for a System to Monitor Temperature in Underground Electric Power Transmission Cables,” Report HCP/T-2079, prepared by System Control Inc., Palo Alto, California.
128. Walldorf, S.P., and Engelhardt, J.S. (1998), ‘The First Ten Years of Real-Time Ratings on Underground Transmission Circuits, Overhead Lines, Switchgear and Power Transformers,” Electricity Today, Feb. 1998, pp. 86-88.
129. Anders GJ. (1997), Rating of Electric Power Cables: Ampacity Computations for Transmission, Distribution and Industrial Applications, IEEE Press, New York, McGraw Hill, New York, 1998.
130. Black, Z.W., and Rehberg, R.L. (1985), “Simplified Model for Steady State and Real-Time Capacity of Overhead Conductors,” IEEE Trans. on Power Systems, Vol. PAS-104, pp. 2942-2963.
131. Brakelmann, H. (1985), Belastbarkeiten der Energiekabel, VDE-Verlag, Berlin/Offenburg.
132. Brakelmann, H, Lauter, P., and Anders, GJ. (2004), “Current Rating of Multicore Cables,” submitted for publication in IEEE Transactions on Industry Applications.
133. Dorison, E., De Kepper, B., Protat, F., Gurkahraman A., and Masure L. (2003), “Current Rating of Cables Installed in Tunnels,” in Proceedings of Jicable '03, Versailles, France, June 2003, pp. 600-605.
134. Goldenberg, H. (1957), “The Calculation of Cyclic Rating Factors for Cables Laid Direct or in Ducts,” Proceedings of IE, Vol. 104, Pt. C, pp. 154-166.
135. Goldenberg, H. (1958), “The Calculation of Cyclic Rating Factors and Emergency Loading for One or More Cables Laid Direct or in Ducts,” Proceedings ofIEE, Vol. 105, Pt. C, pp. 46-54.
136. Harshe, B.L., and Black, W.Z. (1994), “Ampacity of Cables in Single Open-Top Cable Trays,” IEEE Transactions on Power Delivery, Vol. PWRD-9, No.4, pp. 1733-1740.
137. Heinhold, L. (1999), Kabel und Leitungen for Starkstrom, Publicis MCD Verlag, Erlangen.
138. ICEA/NEMA (1986), “Ampacities of Cables in Open-Top Cable Trays,” ICEA Publication No. P54-440, NEMA Publication No. WC51, Washington, DC.
139. IEC Standard 60853-1 (1985), “Calculation of the Cyclic and Emergency Current Ratings of Cables. Part I: Cyclic Rating Factor for Cables up to and Including 18/30 (36) kV,” Publication 853-1.
140. IEC Standard 60853-2 (1989), “Calculation ofthe Cyclic and Emergency Current Ratings of Cables. Part 2: Cyclic Rating Factor of Cables Greater than 18/30 (36) kV and Emergency Ratings for Cables of All Voltages,” Publication 853-2.
141. IEC Standard 60287 (1994), “Calculation ofthe Continuous Current Rating of Cables (100% load factor).”
142. IEC Standard 60287-2-2 (1995), “Calculation of the Continuous Current Rating of Cables (100% load factor)-Groups of Cables in Air.”
143. IEC Standard 60364-5-52 (2001), “Electrical Installations of Buildings-Part 5-52: Selection and Erection of Electrical Equipment-Wiring Systems.”
144. Incropera, F.P., and De Witt, D.P. (1990) Introduction to Heat Transfer, Wiley, New York.
145. Jong, Jan de (2003), “The Reduction Factors for a Cable in a Group of Power Cables,” private communication.
146. Lauriat G. (1969), Thermique-Cours A jere Anneee: Itroduction aux Transferts Thermiques,” CNAM/MEDIAS, Paris.
147. Leake, H.C. (1997), “Sizing of Cables in Randomly Filled Trays with Consideration for Load Diversity,” IEEE Transacitons on Power Delivery, Vol. 12, No. I, pp. 39-44.
148. Morgan, V.T. (1992), “Effect of Mixed Convection on the External Resistance of Single-core and Multicore Bundled Cables in Air,” IEE Proceedings-C, Vol. 139, No. 2, pp. 109-116.
149. Morgan, V.T. (1993), “External Thermal Resistance of Aerial Bundled Cables,” IEE Pro-ceedings-C, Vol. 140, No. 2, pp. 65-62.
150. Neher, J.H., and McGrath, M.H. (1957), “The Calculation of the Temperature Rise and Load Capability of Cable Systems,” AIEE Transactions, Vol. 76, Part 3, pp. 752-772.
151. Parr, R.G. (1974), “Heat Emissions from Cable in Air,” ERA report 74-27.
152. Schach, M., and Kidwell Jr, R. E. (1952), “Continuous Current and Temperature Rise in Bundle Cables for Aircraft,” AIEE Transactions, Vol. 71, Pt. II, pp. 376-384.
153. Slaninka, P. (1969), “External Thermal Resistance of Air-Installed Power Cables,” Proceedings of IEE, Vol. 116, No. 9, pp. 1547-1552.
154. Song Ho-Liu, Xu Han, “Analytical Method of Calculating the transient and Steady State Temperature Rises for Cable Bundle in Tray and Ladder,” IEEE Transactions on Power Delivery, Vol. 13, pp. 691-698.
155. Stolpe, J. (1970), “Ampacities for Cables in Randomly Filled Cable Trays,” IEEE Transactions on Power Apparatus and Systems, Vol. PAS-90, pp. 962-973.
156. Whitehead, S., and Hutchings, E. E. (1939), “Current Ratings of Cables for Transmission and Distribution,” Journal of IEE, Vol. 38, pp. 517-557.
157. Winkler F. (1963), “Current-Carrying Capacity of Cables Installed Horizontally in Free Air,” Siemens Review, Vol. XXX, No. II, pp. 413-418.
158. VDE 0298 T2, “VDE-Bestimmung für die Verwendung von Kabeln und isolierten Leitungen für Starkstromanlagen.”
159. Buller, F.H, .Neher, J.H., (1950) “The Thermal Resistance Between Oil and A Surrounding Pipe Duct Wall”, AIEE Transaction 69, Part I, pp. 342-349.
160. Buller, F.H., Falcone, A.J., and Roberts, W.J. (1951), “Forced-air Cooling of Station Cables,” AIEE Transactions on Power Apparatus and Systems, Vol. 70, pp. 798-803.
161. Buller, F.H. (1952), “Artificial Cooling of Power Cables,” AIEE Transactions on Power Apparatus and Systems, Vol. 84, No. 9, pp. 795-806.
162. Burrell, R.W. (1965), “Application of Oil Cooling in High-Pressure Oil-Filled Pipe-Cable Circuits,” AIEE Transactions on Power Apparatus and Systems, Vol. 71, pp. 634-631.
163. Chato, I (1977), “Free and Forced Convective Cooling of Pipe-Type Electric Cable Systems,” EPRIEL-147, Project 7821, Final Report, August 1977.
164. Chato, J, Crowley, J.M., et al. (1980), “Free and Forced Convective Cooling of Pipe-Type Electric Cables,” EPRIEL-1872, Vol. 1, Project 7583-1.
165. CIGRE, (1979), “The Calculation of Continuous Ratings for Forced-Cooled Cable,” Report of Study Committee 21, WG 21-08, Electra, No. 66, pp. 59-84.
166. CIGRE, (1985), “The Calculation of Continuous Ratings for Forced-Cooled High-Pressure Oil-Filled Pipe-Type Cables,” Report of Study Committee 21, WG 21-08, Electra, No. 113, pp. 97-121.
167. Giaro, JA. (1956), “The Efficiency of Forced Cooling of Power Cables Compared with Systems Laying with Natural Cooling,” CIGRE Report No. 207, Paris, France.
168. Glicksman, L.R., Sanders, IV., Robsenow, W.M., and Buckweitz, M.D. (1978), “Heat Conduction in the Cable Insulation of Forced-Cooled Underground Transmission Lines,” IEEE Trans, on Power Apparatus and Systems, Vol. PAS-97, No. I, pp. 134-139.
169. Kitogawa, K. (1964), “Forced Cooling of Power Cables in Japan. Its Studies and Performance,” CIGRE Report 213, Paris, France.
170. McAdams, W.H.M. (1942), Heat Transmission, 2nd ed., McGraw-Hill, New York.
171. Oudin, J.M., et al. (1960), “French Research and Development in the Field of High and Extra High Voltage Cables,” CIGRE Report No. 230, Paris, France.
172. Pietruchow B.S., Krasnosczekow E.A. (1959), “Tieplootdacza priwiazkostnom tieczenji zid-kosti w trubach w uslowjach suszczestwiennogo izmienienija wiszkosti,” Tieplop-eredacza i tieplowoje modelirowanje [in Russian], published by. ANSSSR, 1959, pp. 165.
173. Pumhagen, D.W. (1984), “Designer’s Handbook for Forced-Cooled High-Pressure Oil-Filled Pipe-Type Cable Systems,” EPRIEL-3624, Project 7801-5, Final Report, July 1984.
174. Ralston, P., and West, O.H. (1960), “The Artificial Cooling by Water of Underground Cables,” CIGRE Report No. 215, Paris, France.
175. Zubert, M., Napieralska, M., and Napieralski, A. (2000), “RESCUER-The New Solution in Multidomain Simulations,” Microelectronics Journal, 37(11-12) pp. 945-954.