Corrosion detection and monitoring - A review

NACE - International Corrosion Conference Series

Volumn 2000-March, Issue , 2000, Pages

  Agarwala, Vinod S ^a   Ahmad, Siraj ^b  

^a NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION   (United States)

^b LeMoyne Owen College   (United States)

Author keywords

Chemical; Corrosion detection; Corrosion monitoring; Corrosion sensors; Electrochemical; Electromagnetic; Fluorescence; Non destructive methods; Optical; Radiographic; Thermographic; Ultrasonic and acoustic

Indexed keywords

AIRCRAFT DETECTION; CHEMICAL DETECTION; CHEMICALS; COSTS; FLUORESCENCE; GROUND VEHICLES; INFRARED IMAGING; LIFE CYCLE; NONDESTRUCTIVE EXAMINATION; PIPELINE CORROSION; ULTRASONIC TESTING;

CORROSION DETECTION; CORROSION MONITORING; CORROSION SENSOR; ELECTROCHEMICAL; ELECTROMAGNETIC; NONDESTRUCTIVE METHODS; OPTICAL; RADIOGRAPHIC; THERMOGRAPHIC;

ELECTROCHEMICAL CORROSION;

EID: 85039919093     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (110)

1. J. H. Payer, Materials Performance, Vol. 34, 1995.
2. "Economic Effects of Metallic Corrosion in the United States - A 1995 Update", Battelle Report to Specialty Steel Industry of North America, April 1995.
3. "Corrosion Detection Technologies-A Sector Study", North American Technology Industrial Base Organization (NATIBO), Prepared by BDM Federal Inc., McLean, VA, Final Report, March 1998.
4. A. J. Freedman, A. Dravnicks, and B. Ostrofsky, Petroleum Refiner, May 1960.
5. S. L. Chawla, and R. K. Gupta, Material Selection for Corrosion Control, 1995.
6. J. L. Rose, D. Jiao, S. P. Pelts, J. N. Barshinger, and M. J. Quarry, "Hidden Corrosion Detection with Guided Waves", Department of Engineering Science and Mechanics, Pennsylvania State University, 1998.
7. N. R. Sorenson, A. J. Ricco, and S. J. Martin, "Metallic Materials", NASA Technical Reports, ID:19890013357N (89N22728), Sandia National Laboratories, Albuquerque, NM, Jan. 1989.
8. L. Veleva, S. A. Tomas, and E. Marin, "On the Use of the Photoacoustic Technique for Corrosion Monitoring of Metals: Cu and Zn Oxides Formed in Tropical Environments", Corrosion Science, Vol. 39, pp. 1641-655, Sept. 1997.
9. R. Mah, R. L. Kochen, and J. M. Macki, NASA Technical Reports, ID: 19760018289 N (76N25377), Atomic International Division, Golden, CO, Dec. 1975.
10. R. H. Jones, A. M. Friessel, and R. Pathania, Corrosion, 47(1991).
11. T. N. Crump, Nondestructive Testing in Process Industries Corrosion, B. J. Moniz and W. I. Pollock, Ed., NACE, 1986.
12. S. Z. Yao, J. H. Chen, and L. H. Nie, "Bulk Acoustic Wave Technique as a Real-Time Corrosion Behavior of Copper in Acetic Acid", Corrosion, 53(1997): pp. 195-99.
13. H. Mazille, R. Rothea, and C. Tronel, "An Acoustic Emission Technique for Monitoring Pitting Corrosion of Austenitic Stainless Steels", Corrosion Science, 37(1995): pp. 1365-67.
14. Jun. Pei, F. L. Degertekin, B. V. Honein, and Butrus T. Khuri-Yakub, "Erosion/Corrosion Monitoring with Dry-Contact Ultrasonic Lamb-Wave Transducers", ID: 19980038697, Proceedings of SPIE- The International Society for Optical Engineering, Vol. 2945, pp. 428-35, January 1996.
15. Michael Twomey, "Inspection Techniques for Detecting Corrosion under Insulation", Materials Evaluation, 55(1997): pp. 129-32.
16. G. Wallace, et al., Corrosion, 45, 12(1989): p. 1016.
17. J. Asher, J. W. Webb, N. J. M. Wilkins, and P. F. Lawrence, NASA Technical Reports, ID: 19830007191 N (83N15462), Atomic Energy Research Establishment, Harwell, UK.
18. J. Asher, T. W. Conlon, B. C. Tofield, and N. J. M. Wilkins, "Thin Layer Activation: A New Plant Corrosion-Monitoring", NASA Technical Reports, ID: 19830027947 N (83N36218), March 1983.
19. N. K. Del Grande, G. A. Clark, P. F. Durbin et al., SPIE-The International Society for Optical Engineering, Vol. 1479(1991): pp. 335-351.
20. N. Goldfine and N. A. Greig, "Using Electromagnetic Sensors (Magnetometers and Dielectrometers) to Detect Corrosion Beneath and Moisture Within Paint Coatings on Aircraft", CORROSION/94, Paper No. 353, (Houston, TX: NACE International, 1994).
21. rd International Conference on Properties and Applications of Dielectric Materials, Tokyo, Japan, July 1991
22. John P. Wikswo, Jr., "Squid Magnetometers for Studying Corrosion and Corrosion Protection in Aircraft Aluminum", CORROSION/97, Paper No. 293, ((Houston, TX: NACE International 1997).
23. L. Atherton, P. Laursen, and M. A. Siebert, "Small-Diameter MFL Detector Overcoming Technical Hurdles", PipeLine Industry, 76(1993): pp. 69-73.
24. S. W. Dean, "Electrochemical Methods for Corrosion Testing in the Process Industries", in Electrochemical Corrosion Testing with Special Consideration of Practical Applications, E. Heintz, J. C. Rowlands, and F. Mansfield, Ed., Proceedings of International Workshop, Ferrara, Italy, DECHEMA 1986, p 1-15.
25. J. Carl Bovankovich, "On-Line Corrosion Monitoring for Process Plant Control", Materials Performance, 33(1994): pp. 57-60.
26. S. W. Dean, In-Service Monitoring, ASM Handbook, Vol. 13, ASM International, 1987, P.197.
27. Gerald K. Brown, "Traditional Corrosion Monitors Have Their Usefulness - Part 2", PipeLine & Gas Industry, Vol. 79(April 1996): pp. 53-4.
28. S. L. Chawla, and R. K. Gupta, Corrosion Control, p 81, 1995.
29. Gabriele Rocchini, "Corrosion Rate Monitoring by the Linear Polarization Method", Corrosion Science, 34(1993): pp. 2031-2044.
30. Gabriele Rocchini, "Corrosion Rate Monitoring of Metallic Materials Using the Linear Response", Corrosion Science, 36(1994): pp. 1047-061.
31. Gabriele Rocchini, "A Numerical Method for the Evaluation of the Corrosion Rate of a Metal", Corrosion Science, 34(1993): pp. 885-97.
32. N. G. Thompson and K. M. Lawson, "Development and Use of Polarization Resistance Measurements for Measuring Corrosion Rate in Soil and Concrete", Corrosion Asia/92, Singapore, NACE, 1992.
33. F. Ansuni, "Dual Mode Corrosion Monitors", CORROSION/91, Paper No. 327, (Houston, TX: NACE International, 1991).
34. R. Jasinski and K. D. Efird, "Electrochemical Corrosion Probe for High Resistivity Hydrocarbon/Water Mixtures", Corrosion 44, 9(1988): p. 658.
35. S. K. Chawla, T. Anguish, and J. H. Payer, "Microsensors for Corrosion Control", Materials Performance 29, 5(1990): p. 68.
36. Maria Inman, E. Jennings Taylor, A. Rawat, M. Sunkara, et al., "Detection of Corrosion in Natural Seawater Using Polarization Resistance Measurements", CORROSION/97, Paper Nos. 296 and 312, (Houston, TX: NACE International, 1997).
37. V. S. Agarwala, "A Probe for Monitoring Corrosion Atmospheric Corrosion in Marine Environments", ed. W. H. Ailor, J. Wiley and Sons, Inc., N. Y., pp. 183-192, 1982.
38. P. J. Sereda, ASTM Special Technical Presentation on Corrosion in Natural Environments.
39. th ICC, Melbourne, Australia, December 1996.
40. V. S. Agarwala, "Chemical Sensor for Structural Integrity", Proceeding of 1992 Tri-Service Corrosion Conference, Plymouth, MA, (U. S. Army Materials Laboratory, Watertown, MA, 1992).
41. V. S. Agarwala and A. Fabiszewski, "Thin Film Microsensors for Integrity of Coatings, Composites and Hidden Structures", CORROSION/94, Paper No. 342, (Houston, TX: NACE International, 1994).
42. V. S. Agarwala, "Sensors for Corrosion Detection and Monitoring in Hidden Areas", Proceedings of the Symposium on 'Chemical Sensors II', Eds. M. Butler, A. Ricco and N. Yamazoe, The Electrochemical Society, Pennington, NJ, Vol. 93-7, 698-708, 1993.
43. Byron Zollars, Naval Air Warfare Center Aircraft Division, Patuxent River, MD, Internal Report, Contract No. N00421-96-C-5054, (Systems & Process Engineering Corporation, Austin, TX, 20 July 1999).
44. J. H. Payer, K. Fink, and I. Song, "Metal-Metal Oxide pH Sensor: The Effect of Anions and Aeration on pH Measurements", CORROSION/97, Paper No. 308, (Houston, TX: NACE International, 1997);
45. K. Fink and J. H. Payer, "Corrosion Sensors for Condensate Corrosivity in Heat Exchangers", CORROSION/94, Paper No. 330, (Houston, TX: NACE International, 1994).
46. F. Mansfeld, "Determination of Time-of-Wetness and Corrosion Rates with Atmospheric Corrosion Rate Monitors", CORROSION/94, Paper No. 333, (Houston, TX: NACE International, 1994).
47. D. A. Eden, A. N. Rothwell, and J. L. Dawson, "Electrochemical Noise for Detection of Susceptibility to Stress Corrosion Cracking", NACE/91, Paper No. 444, (Houston, TX: NACE International, 1991).
48. R. G. Hardon, et al., "Relationship between Electrochemical Noise and Corrosion Rate of Steel in Salt-Contaminated Concrete", British Corrosion Journal, 23, 4(1988): p. 225.
49. R. C. Newman and K. Sieradski, Scripta Metallurgical, 17, 5(1983): p. 621.
50. M. Metikos-Hukovic, J. Loncar, and C. Zevnik, "Monitoring the Electrochemical Potential Noise Produced by Coated Metal Electrodes", Werkstoffe und Korrosion 40(1989): p. 494.
51. D. A. Eden, et al., "Electrochemical Noise Measurements and Their Applications to Coated Systems", ACS, Division of PMSE, 53(1985), p. 388.
52. A. Legat and V. Dolecek, "Corrosion Monitoring System Based on Measurement and Analysis of Electrochemical Noise", Corrosion, 51, 4(1995): pp. 295-300.
53. J. G. Gonzalez-Rodriguez, V. M. Salinas-Bravo, and E. Garcia-Ochoa, "Use of Electrochemical Potential Noise to Detect Initiation and Propagation of Stress Corrosion Cracks in a 17-4 PH Steel", Corrosion, 53(1997): pp. 693-99.
54. F. Mansfeld, L. T. Han, and C. C. Lee, "Analysis of Electrochemical Impedance and Noise Data for Polymer Coated Metals", Corrosion Science, 39(1997): pp. 255-79.
55. Y. J. Tan, S. Bailey, and B. Kinsella, "The Monitoring of the Formation and Destruction of Corrosion Inhibitor Films Using Electrochemical Noise Analysis (ENA) ", Corrosion Science, 38(1996): pp. 1681-695.
56. C. S. Jeffcoate, T. L. Wocken, and G. P. Bierwagen, "Electrochemical Assessment of Spray-Applied Thermoplastic Coating Barrier Properties", Journal of Materials Engineering and Performance, 6(1997): pp. 417-20.
57. F. Wenger, S. Cheriet, and B. Talhi, "Electrochemical Impedance of Pits - Influence of the Pit Morphology", Corrosion Science, 39(1997): pp. 1239-52.
58. I. Annergren, D. Thierry, and F. Zou", Localized Electrochemical Impedance Spectroscopy for Studying Pitting Corrosion on Stainless Steels", Journal of Electrochemical Society, 144(1997): pp. 1208-1215.
59. R. P. Vera Cruz, A. Nishikata, and T. Tsuru, "AC Impedance Monitoring of Pitting Corrosion of Stainless Steel under a Wet-Dry Cyclic Condition in Chloride-Containing Environment", Corrosion Science, 38(1996): pp. 1397-1406.
60. F. Mansfeld, "Use of Electrochemical Impedance Spectroscopy for the Study of Corrosion Protection by Polymer Coatings", Journal of Applied Electrochemistry, 25(1995): pp. 187-202.
61. N. Mehta and V. S. Agarwala, "Electrochemical Impedance Spectroscopy: A Tool for Evaluating Paint Film Persistency on Metal Surface", Paper No. 049, U. S. Navy and Industry Corrosion Technology Information Exchange, Louisville, KY, 1998.
62. J. A. Grandie and S. R. Taylor, "Electrochemical Impedance Spectroscopy as a Method to Evaluate Coated Aluminum Beverage Containers - Part 2: Statistical Analysis of Performance", Corrosion, 53(1997): pp. 347-355.
63. J. A. Grandie and S. R. Taylor, "Electrochemical Impedance Spectroscopy of Coated Aluminum Beverage Containers; Determination of an Optimal Parameter for Large Sample Evaluation", Corrosion, Vol. 50(1994), pp. 792-803.
64. M. Kendig, S. Jeanjaquet, and R. Brown, "Rapid Electrochemical Assessment of Paint", Journal of Coatings Technology, 68(1996): pp. 39-47.
65. S. M. Cohen, "Electrochemical Impedance Spectroscopy Evaluation of Various Aluminum Pre-Treatments Painted with Epoxy Primer", Journal of Coatings Technology, 68(1996): pp. 73-81.
66. R. S. Lillard, J. Kruger, and W. S. Tait, "Using Local Electrochemical Spectroscopy to Examine Coating Failure", Corrosion, 51(1995): pp. 251-259.
67. H. S. Rosenberg and B. C. Syrett, "Electrochemical Impedance Spectroscopy for Monitoring Coating Performance in Condensing Environments", Journal of Testing and Evaluation, 22(1994): pp. 537-541.
68. J. R. Scully and S. T. Hensley, "Lifetime Prediction for Organic Coatings on Steel and a Magnesium Alloy Using Electrochemical Impedance Methods", Corrosion, 50(1994): pp. 705-716.
69. H. Xiao and F. Mansfeld, "Evaluation of Coating Degradation with Electrochemical Impedance Spectroscopy and Electrochemical Noise Analysis", Journal of the Electrochemical Society, 141(1994): pp. 2332-2337.
70. T. S. N. Sankara Narayanan and M. Subbaiyan, "Evaluation of Phosphate Coatings by Electrochemical Impedance Spectroscopy", Metal Finishing, 92(1994): pp. 33-36.
71. E. Leitao, R. A. Silva, and M. A. Barbosa, "Electrochemical Impedance Spectroscopy of Nitrogen and Carbon Sputter Coated 316 L Stainless Steel", Corrosion Science, 39(1997): pp. 333-338.
72. A. Conde and J. de Damborenea, "An Electrochemical Impedance Study of a Natural Aged Al-Cu-Mg Alloy in Nad", Corrosion Science, 39(1997): pp. 295-303.
73. J. H. Wang, F. I. Wei, and H. C. Shih, "Electrochemical Studies of the Corrosion Behavior of Carbon and Weathering Steels in Alternating Wet/Dry Environments with Sulfur Dioxide Gas", Corrosion, 52(1996): pp. 600-08.
74. A. Nishikata, Y. Ichihara, and T. Tsuru, "An Application of Electrochemical Impedance Spectroscopy to Atmospheric Corrosion Study", Corrosion Science, 37(1995): pp. 897-911.
75. C. Cao, "Electrochemical Techniques for Interface Inhibitor Research", Corrosion Science, 38(1996): pp. 2073-2082.
76. Y. J. Tan, S. Bailey, and B. Kinsella, "An Investigation of the Formation and Destruction of Corrosion Inhibitor Films Using Electrochemical Impedance Spectroscopy", Corrosion Science, 38(1996): pp. 1545-1561.
77. J. F. Mclntyre, S. M. Lipka, and R. Haniyur, "Electrochemical Impedance Spectroscopy as a Tool to Nondestructively Evaluate Degradative Processes in AS4/Nylon 6 Composites", Journal of the Electrochemical Society, 142(1995): pp. 1118-1126.
78. P. R. Roberge and V. S. Sastri, "On-Line Corrosion Monitoring with Electrochemical Impedance Spectroscopy", Corrosion, 50(1994): pp. 744-754.
79. Ann Van Orden Chidester, "Monitor On-Line Corrosion Electrochemically", Chemical Engineering Progress, 90(1994): pp. 67-73.
80. J. A. Gonzalez, M. Benito, and S. Feliu, "Suitability of Assessment Methods for Identifying Active and Passive Zones in Reinforced Concrete", Corrosion, 51(1995): pp. 145-152.
81. J. Zosel, W. Fichtner, H. Kaden, and B. Rau, "Corrosion Monitoring with Electrochemical Sensors by Using Evolution-Inspired Optimization Techniques", Werkstoffe und Korrosion, 47, 6(1996): pp. 299-306.
82. J. F. Chen and W. F. Bogaerts, "Electrochemical Emission Spectroscopy for Monitoring Uniform and Localized Corrosion", Corrosion, 52(1996): pp. 753-759.
83. M. Forslund, J. Majoras, and C. Leygraf, "A Sensor System for High Resolution In-Situ Atmospheric Corrosivity Monitoring in Field Environments"" Journal of the Electrochemical Society, 144(1997): pp. 2637-2642.
84. P. Cosentino, B. Grossman, and C. Shieh, "Fiber-Optic Chloride Sensor Development", Journal of Geotechnical Engineering, 121(1995): pp. 610-617.
85. E. D. Schmauch, "A Computerized Corrosion Monitoring System", NASA Technical Reports, ID 19930073667 N (93N71114), Conoco Inc., Ponca City, OK, January 1986.
86. R. G. Kelly, J. Yuan, S. H. Jones, W. Blanke, J. H. Aylor, W. Wang, A. P. Batson, A. Wintenberg, and G. G. Clemena, "Embeddable Microinstruments for Corrosion Monitoring", CORROSION/97, Paper No. 294, (Houston, TX: NACE International, 1997).
87. R. W. Bosch and W. F. Bogaerts, "Instantaneous Corrosion Rate Measurement with Small-Amplitude Potential Intermodulation Techniques", Corrosion, 52, 3(1996): pp. 204-212.
88. Yoshikazu Miyata and Shukuji Asakura, "Corrosion Monitoring of Metals in Soils by Electrochemical and Related Methods: Part I - Monitoring of Actual Field Buried Metal Structures and Electrochemical Simulation with Corrosion Probes and Pilot Pieces", Japan Soc. Corr. Engg., 46, 9(1997): pp. 451-455.
89. G. Glass, A. M. Hassanein, and N. R. Buenfeld, "Monitoring the Passivation of Steel in Concrete Induced by Cathodic Protection", Corrosion Science, 39, (1997): pp. 1451-1458.
90. H. S. Isaacs and Jeong-Hwan Cho, "Potential Transmission and Transients during Corrosion", NASA Technical Reports, ID: 19930020067 N (93N29256), Brookhaven National Lab., Upton, NY, January 1992;
91. H. S. Isaacs, "Potential Transients, Transmission and Electrochemical Corrosion Detection", NASA Technical Reports, ID: 99 40011449 N (94N15922), Brookhaven National Lab., Upton, NY, January 1993.
92. Y. F. Cheng and Y. L. Du, "Design of an Electrochemical Probe for Monitoring Susceptibility of Steel in Pickling to Hydrogen-Induced Cracking", Corrosion, 49(1993): pp. 776-781.
93. R. E. Johnson and V. S. Agarwala, "The Use of Fluorescent Compounds and Complexes of Metals as Early Warning Detectors for Corrosion", CORROSION/94, Paper No. 332, (Houston, TX: NACE International, 1994).
94. R. E. Johnson and V. S. Agarwala, K. S. Rajan, A. Singh and M. G. Durrett, "Fluorescent Materials Utilized as Early Warning Sensors for Corrosion of Aluminum Alloys", NACE/99, Paper No. 505, (Houston, TX: NACE International, 1999).
95. Anna A. Panova, Paul Pantano, and David R. Walt, "In-Situ Fluorescence Imaging of Localized Corrosion", CORROSION/97, Paper No. 314, (Houston, TX: NACE International, 1997).
96. Anna A. Panova, Paul Pantano and David R. Walt, "In-Situ Fluorescence Imaging of Localized Corrosion with a pH-Sensitive Imaging Fiber", Analytical Chemistry, 69(1997): pp. 1635-641.
97. J. Gregory, "Turbidity Fluctuations in Flowing Suspensions", Journal of Colloid and Interface Science, 105, 2(1985): p. 357;
98. J. Gregory and D. W. Nelson, "Monitoring of Aggregates in Flowing Suspensions", Colloids and Surfaces, 18(1986): p. 175.
99. T. Y. Chen, M. R. Godfrey, and S. C. Avallone, "Corrosion and Corrosion Product Transport Monitoring in Boiler Condensate Systems", CORROSION/94, Paper No. 336, (Houston, TX: NACE International, 1994).
100. J. H. Hunt, "Detection of Corrosion On-Set by Optical Second Harmonic Generation", CORROSION/94, Paper No. 338, (Houston, TX: NACE International, 1994).
101. Y. R. Shen, in: New Laser and Optical Investigation of Chemistry and Structure of Interfaces, Eds. R. Hall and A. B. Ellis (Verlag Chemie, Weiheim, 1986) p. 151;
102. Ann. Rev. Materials Science, Vol. 16, p. 69, 1986.
103. N. Sridhar and D. S. Dunn, "Effect of Applied Potential on Changes in Solution Chemistry inside Crevices on Type 304L Stainless Steel and Alloy 825", CORROSION/94, Paper No. 347, (Houston, TX: NACE International, 1994).
104. B. A. Shaw, P. J. Moran, and P. O. Gartland, Corrosion Science, 32(1991): pp. 707-719.
105. N. Sridhar, G. A. Cragnolino, J. C. Walton, and D. Dunn, Application of Accelerated Corrosion Tests to Service Life Prediction of Materials, G. Cragnolino and N. Sridhar (eds.), ASTM STP 1194, Philadelphia, PA, American Society for Testing and Materials, 1994.
106. K. Habib and F. Al-Sabti, "Monitoring Pitting Corrosion by Holographic Interferometry", Corrosion, 53(1997): pp. 688-92.
107. David Owen, "Thread of Evidence - A Monitoring Device to Predict Damage to Components Before it Occurs", Engineering, London, England, Vol. 238, pp. 38-9, July/August 1997.
108. L. M. Bland, "Aircraft Structural Life Monitoring and the Problem of Corrosion", NASA Technical Reports, ID: 19780022338 N (78N30281), Aeronautical Research Labs., Melbourne, Australia, April 1977.
109. R. D. Granata, John W. Fisher, and James C. Wilson, "Update on Applications of Corrosion Coulometers", CORROSION/97, Paper No. 307, (Houston, TX: NACE International, 1997).
110. M. R. Godfrey and T. Y. Chen, "Monitoring Corrosion in Boiler Systems with Colorimetric Tests for Ferrous and Total Iron", Corrosion, 51(1995): pp. 797-804.