Infrastructure determination for electronic assembly reverse production systems

Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999

Volumn , Issue , 1999, Pages 696-700

  Ammons, J C ^a   Realff, M J ^b   Newton, D ^a  

^a Georgia Institute of Technology   (United States)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DECISION MAKING; MANUFACTURE; MECHANICAL VARIABLES MEASUREMENT; SUPPLY CHAINS;

DESIGN AND OPERATIONS; ELECTRONIC ASSEMBLIES; GLOBAL SUPPLY CHAIN; MIXED INTEGER PROGRAMMING MODEL; REVERSE FLOW; REVERSE PRODUCTION SYSTEMS; UNIDIRECTIONAL FLOW; USED PRODUCT;

INTEGER PROGRAMMING;

EID: 85035338150     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ECODIM.1999.747700     Document Type: Conference Paper

References (40)

1. Allred, Ronald, and Lincoln Busselle (1997), "Economical Teritary Recycling Process for Mixtures of Electronic Scrap, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 115-120.
2. Ammons, Jane C., Matthew J. Realff, and David Newton (1997), "Reverse Production System Design And Operation for Carpet Recycling, " submitted to European Journal of Operational Research, December, 1997.
3. Bartel, Thomas (1995), "Recycling Program for Printer Toner Cartridges and Optical Photoconductors, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 225-228.
4. Beckman, Sara, Paul Worhach, and Paul Sheng (1995), "Environmentally-Conscious Supply Chain Management, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 235-239.
5. Blazek, M, P. Lal, and M. DeBartolo (1998), "End-Of-Life Management of Telecommunication Equipment: Case Study, Business Case, and Policy Implications, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 133-137.
6. Boks, Casper, Jorgen Nilsson, Keijiro Masui, Ken Suzuki, Catherine Rose, and Burton Lee (1998), "An International Comparison of Product End-of-Life Scenarios and Legislation for Consumer Electronics, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 19-24.
7. Brodersen, K. D. Tartler, B. Danzer (1994), "Scrap of Electronics-A Challenge to Recycling Activities, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 174-178.
8. Corbet, L. Jung, P. Dillon, and M. J. Olsavsky (1997), "Plastic Recycling in the Electronics Industry, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 297-302.
9. Flapper, Simme Douwe P. (1996), "Logistics aspects of reuse-an overview, " Proceedings of the First International Seminar on Reuse, S. D. Flapper and A. J. De Ron, (eds.), European Professors of Industrial Management, Eindhoven University of Technology, Eindhoven, The Netherlands, November 11-13, 109-118.
10. Henderickson, Chris, Lester Lave, Francis McMichael, Daniel Siewiorek, Asim Smailagic, and Tse-Sung Wu (1994), "Product Disposal and Re-Use Issues for Portable Computer Design, Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 109-114.
11. Hermann, Ferdinand, Han-Peter Urbach (1995), "Restricted Substances in Products in the European Union, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 216-219.
12. Inagaki, Yasuhito, Miyuki Kuromiya, Tsutomu Noguchi, and Haruo Watanabe (1997), "Modification of Plastic Wastes from Electrical Products, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 121-124.
13. Jung, Leah, and Thomas Bartel (1998), "An Industry Approach to Consumer Computer Recycling: The San Jose Project, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 36-41.
14. Kirby, J. Ray, and Dewey Pitts (1994), "Resource Recovery Strategies for End-of-Life Business Machines, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 167-170.
15. Kirby, J. Ray, T. Mann, O. D. Pitts, and R. C. Sanwald (1995), "Factors Affecting Product End-of-Life Management (PELM) Opportunities, Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 182-185.
16. Langerak, Edwin (1997), "To Shred or to Disassemble Recycling of Plastics in Mass Consumer Goods, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 63-68.
17. Legarth, J. B., Leo Alting, and Fian Luca Baldo (1995), "Sustainability Issues in Circuit Board Recycling, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 126-131.
18. Low, Ming Kann, David J. Williams, and Colin Dixon (1997), "The Economics of End of Life Management Strategy Choice: Routes to Revenue Generation From Mature Products, ", " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 291-296.
19. Maxie, E. (1994), "Supplier Performance and the Environment, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 323-330.
20. Mizuki, Colleen, Ted Aanstoos, Greg Pitts, and Steve Nichols (1997), "CRT Disposition: An Assessment of Limitations and Opportunities in Reuse, Refurbishment, and Recycling in the U. S., " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 73-78.
21. Müller, Jutta, Hansjörg Griese, Andreas Middendorf, and Herbert Reichl, "Towards a Better Closed Loop Economy for Electronic Products, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 167-171.
22. Nagel, Carsten (1998), "Take IT back-European Approaches for Setting Up Reverse Logistic Systems, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 25-29.
23. Newton, D., M. J. Realff, and J. C. Ammons (1999), "Carpet Recycling: The Value Of Cooperation And A Robust Approach To Determining The Reverse Production System Design, " Proceedings of the Second Annual Working Seminar on Re-Use, Eindhoven, the Netherlands, March 1-3.
24. Nielsen, L. (1994), "Reducing Material Use in Protective Packaging for Computer Products, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 317-322.
25. Paton, Bruce (1994), "Market Considerations in the Reuse of Electronic Products, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 115-120.
26. Pohlen, T. L. And M. T. Farris (1992), "Reverse Logistics in Plastics Recycling, " International Journal of Physical Distribution and Logistics Management, 22, 7, 35-47.
27. Porada, Thomas (1994), "Materials Recovery: Asset Alchemy, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 171-173.
28. Realff, Matthew J., Jane C. Ammons, and David Newton (1998), "Carpet Recycling: Determining the Reverse Production System Design, " The Journal of Polymer-Plastics Technology and Engineering, Special Issue on Polymer and Fiber Recycling, to appear.
29. Rose, Catherine, Kosuke Ishii, and Keijiro Masui (1998), "How Product Characteristics Determine End-of-Life Strategies, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 322-327.
30. Sarkis, Joseph, Nicole Darnall, Gerald Nehman, John Priest (1995), "The Role of Supply Chain Management within the Industrial Ecosystem, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 229-234.
31. Song, Jim, Larry Suek, and Michelle Moran (1995), "Recyclability of Glass Reinforced Flame Retardant Impact Polystyrene, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 138-144.
32. St. Denis, Renee, and Steve Skurnac (1998), "Information Technology Product Recycling-An OEM/Recycler Collaboration, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 144-146.
33. Stuart, J. A., M. K. Low, D. J. Williams, L. J. Turbini, J. C. Ammons (1998), "Challenges in Determining Electronics Equipment Take-Back Levels, " IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C, Volume 21, No. 3, July, pp. 225-237.
34. Uzsoy, Reha (1997), "Production Planning for Companies with Product Recovery and Remanufacturing Capability, ", " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 285-290.
35. Veerakamolmal, Pitipong, and Surendra Gupta (1998), "Design of an Integrated Component Recovery System, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 264-269.
36. Wright, Lucy, and Jake McLaren (1998), "Mobile Phone Takeback and Recycling: Analysis of the ECTEL Project, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 54-59.
37. Yender, George (1998), "Battery Recycling Technology & Collection Processes, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 30-35.
38. Yokoyama, S. And M. Iji (1995), "Recycling Plastic Waste from Electronic Component Production Processes, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Orlando, FL, pp. 132-137.
39. Yokoyama, S., and M. Iji (1997), "Recycling of Printed Wiring Boards with Mounted Electronic Parts, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, San Francisco, CA, pp. 109-114.
40. Zussman, Eyal, MengChu Zhou, and Reggie Caudill (1998), "Disassembly Petri Net Approach to Modeling and Planning Disassembly Processes of Electronic Products, " Proceedings of the International Symposium on Electronics & the Environment, IEEE, May, Oak Brook, IL, pp. 331-336.