Tensile Property Balanced and Gas Barrier Improved Poly(lactic acid) by Blending with Biobased Poly(butylene 2,5-furan dicarboxylate)

ACS Sustainable Chemistry and Engineering

Volumn 5, Issue 10, 2017, Pages 9244-9253

  Long, Yu ^a   Zhang, Ruoyu ^a   Huang, Juncheng ^a   Wang, Jinggang ^a   Jiang, Yanhua ^a   Hu, Guo Hua ^b   Yang, Jian ^c   Zhu, Jin ^a  

^a NINGBO INSTITUTE OF MATERIALS TECHNOLOGY AND ENGINEERING   (China)

^b UNIVERSITÉ DE LORRAINE   (France)

^c NINGBO UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Biobased polymer; Gas barrier; Heat resistance; Impact strength; Poly(butylene 2,5 furan dicarboxylate); Poly(lactic acid); Tensile toughness

Indexed keywords

BLENDING; BUTENES; CARBOXYLATION; ELONGATION; HEAT RESISTANCE; IMPACT STRENGTH; LACTIC ACID; POLYMER BLENDS; RUBBER; SCANNING ELECTRON MICROSCOPY;

BIO-BASED POLYMERS; GAS BARRIER; POLY LACTIC ACID; POLY(BUTYLENE 2,5-FURAN DICARBOXYLATE); TENSILE TOUGHNESS;

TENSILE STRENGTH;

EID: 85030454010     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/acssuschemeng.7b02196     Document Type: Article

References (57)

1. Balat, M.; Balat, H. Recent trends in global production and utilization of bio-ethanol fuel Appl. Energy 2009, 86 (11) 2273-2282 10.1016/j.apenergy.2009.03.015
2. Mulhaupt, R. Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality Macromol. Chem. Phys. 2013, 214 (2) 159-174 10.1002/macp.201200439
3. Mohanty, A. K.; Misra, M.; Drzal, L. T. Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world J. Polym. Environ. 2002, 10 (1-2) 19-26 10.1023/A:1021013921916
4. Zhu, Y. Q.; Romain, C.; Williams, C. K. Sustainable polymers from renewable resources Nature 2016, 540 (7633) 354-362 10.1038/nature21001
5. Gross, R. A. Biodegradable Polymers for the Environment Science 2002, 297 (5582) 803-807 10.1126/science.297.5582.803
6. Garlotta, D. A literature review of poly(lactic acid) J. Polym. Environ. 2001, 9 (2) 63-84 10.1023/A:1020200822435
7. van Beilen, J. B.; Poirier, Y. Production of renewable polymers from crop plants Plant J. 2008, 54 (4) 684-701 10.1111/j.1365-313X.2008.03431.x
8. Jacobsen, S.; Degee, P. H.; Fritz, H. G.; Dubois, P. H.; Jerome, R. Polylactide (PLA)-A new way of production Polym. Eng. Sci. 1999, 39 (7) 1311-1319 10.1002/pen.11518
9. Lim, L. T.; Auras, R.; Rubino, M. Processing technologies for poly(lactic acid) Prog. Polym. Sci. 2008, 33 (8) 820-852 10.1016/j.progpolymsci.2008.05.004
10. Lasprilla, A. J. R.; Martinez, G. A. R.; Lunelli, B. H.; Jardini, A. L.; Filho, R. M. Poly-lactic acid synthesis for application in biomedical devices-A review Biotechnol. Adv. 2012, 30 (1) 321-328 10.1016/j.biotechadv.2011.06.019
11. Rasal, R. M.; Janorkar, A. V.; Hirt, D. E. Poly(lactic acid) modifications Prog. Polym. Sci. 2010, 35 (3) 338-356 10.1016/j.progpolymsci.2009.12.003
12. Qiu, J.; Liu, F.; Zhang, J. W.; Na, H. N.; Zhu, J. Non-planar ring contained polyester modifying polylactide to pursue high toughness Compos. Sci. Technol. 2016, 128, 41-48 10.1016/j.compscitech.2016.03.014
13. Xiong, Z.; Ma, S.; Fan, L.; Tang, Z.; Zhang, R.; Na, H.; Zhu, J. Surface hydrophobic modification of starch with bio-based epoxy resins to fabricate high-performance polylactide composite materials Compos. Sci. Technol. 2014, 94, 16-22 10.1016/j.compscitech.2014.01.007
14. Xiong, Z.; Li, C.; Ma, S. Q.; Feng, J. X.; Yang, Y.; Zhang, R. Y.; Zhu, J. The properties of poly(lactic acid)/starch blends with a functionalized plant oil: Tung oil anhydride Carbohydr. Polym. 2013, 95 (1) 77-84 10.1016/j.carbpol.2013.02.054
15. Auras, R.; Harte, B.; Selke, S. An overview of polylactides as packaging materials Macromol. Biosci. 2004, 4 (9) 835-64 10.1002/mabi.200400043
16. Gorrasi, G.; Anastasio, R.; Bassi, L.; Pantani, R. Barrier properties of PLA to water vapour: Effect of temperature and morphology Macromol. Res. 2013, 21 (10) 1110-1117 10.1007/s13233-013-1144-0
17. Anderson, K.; Schreck, K.; Hillmyer, M. Toughening Polylactide Polym. Rev. 2008, 48 (1) 85-108 10.1080/15583720701834216
18. Zeng, J. B.; Li, K. A.; Du, A. K. Compatibilization strategies in poly(lactic acid)-based blends RSC Adv. 2015, 5 (41) 32546-32565 10.1039/C5RA01655J
19. Liu, H.; Zhang, J. Research progress in toughening modification of poly(lactic acid) J. Polym. Sci., Part B: Polym. Phys. 2011, 49 (15) 1051-1083 10.1002/polb.22283
20. Yang, Y.; Xiong, Z.; Zhang, L. S.; Tang, Z. B.; Zhang, R. Y.; Zhu, J. Isosorbide dioctoate as a ″green″ plasticizer for poly(lactic acid) Mater. Des. 2016, 91, 262-268 10.1016/j.matdes.2015.11.065
21. Coativy, G.; Misra, M.; Mohanty, A. K. Microwave Synthesis and Melt Blending of Glycerol Based Toughening Agent with Poly(lactic acid) ACS Sustainable Chem. Eng. 2016, 4 (4) 2142-2149 10.1021/acssuschemeng.5b01596
22. Balakrishnan, H.; Hassan, A.; Imran, M.; Wahit, M. U. Toughening of Polylactic Acid Nanocomposites: A Short Review Polym.-Plast. Technol. Eng. 2012, 51 (2) 175-192 10.1080/03602559.2011.618329
23. Avella, M.; Martuscelli, E.; Raimo, M. Review-Properties of blends and composites based on poly(3-hydroxy)butyrate (PHB) and poly(3-hydroxybutyrate-hydroxyvalerate) (PHBV) copolymers J. Mater. Sci. 2000, 35 (3) 523-545 10.1023/A:1004740522751
24. Sousa, A. F.; Vilela, C.; Fonseca, A. C.; Matos, M.; Freire, C. S. R.; Gruter, G.-J. M.; Coelho, J. F. J.; Silvestre, A. J. D. Biobased polyesters and other polymers from 2,5-furandicarboxylic acid: a tribute to furan excellency Polym. Chem. 2015, 6 (33) 5961-5983 10.1039/C5PY00686D
25. DeJong, E.; Dam, R.; Sipos, L.; Den Ouden, D.; Gruter, G. J. Furandicarboxylic acid (FDCA): a versatile building block for a very interesting class of polyesters. In Biobased Monomers, Polymers, and Materials; Smith, P. B.; Gross, R. A., Eds.; ACS Symposium Series 913; American Chemical Society: Washington, DC, 2012; pp 1-13. DOI: 10.1021/bk-2012-1105.ch001.
26. Sheldon, R. A. Green and sustainable manufacture of chemicals from biomass: state of the art Green Chem. 2014, 16 (3) 950-963 10.1039/C3GC41935E
27. Qin, Y. Z.; Li, Y. M.; Zong, M. H.; Wu, H.; Li, N. Enzyme-catalyzed selective oxidation of 5-hydroxymethylfurfural (HMF) and separation of HMF and 2,5-diformylfuran using deep eutectic solvents Green Chem. 2015, 17 (7) 3718-3722 10.1039/C5GC00788G
28. Zuo, X. B.; Venkitasubramanian, P.; Busch, D. H.; Subramaniam, B. Optimization of Co/Mn/Br-Catalyzed Oxidation of 5-Hydroxymethylfurfural to Enhance 2,5-Furandicarboxylic Acid Yield and Minimize Substrate Burning ACS Sustainable Chem. Eng. 2016, 4 (7) 3659-3668 10.1021/acssuschemeng.6b00174
29. Tsanaktsis, V.; Papageorgiou, D. G.; Exarhopoulos, S.; Bikiaris, D. N.; Papageorgiou, G. Z. Crystallization and Polymorphism of Poly(ethylene furanoate) Cryst. Growth Des. 2015, 15 (11) 5505-5512 10.1021/acs.cgd.5b01136
30. Burgess, S. K.; Leisen, J. E.; Kraftschik, B. E.; Mubarak, C. R.; Kriegel, R. M.; Koros, W. J. Chain Mobility, Thermal, and Mechanical Properties of Poly(ethylene furanoate) Compared to Poly(ethylene terephthalate) Macromolecules 2014, 47 (4) 1383-1391 10.1021/ma5000199
31. Burgess, S. K.; Kriegel, R. M.; Koros, W. J. Carbon Dioxide Sorption and Transport in Amorphous Poly(ethylene furanoate) Macromolecules 2015, 48 (7) 2184-2193 10.1021/acs.macromol.5b00333
32. Burgess, S. K.; Karvan, O.; Johnson, J. R.; Kriegel, R. M.; Koros, W. J. Oxygen sorption and transport in amorphous poly(ethylene furanoate) Polymer 2014, 55 (18) 4748-4756 10.1016/j.polymer.2014.07.041
33. Burgess, S. K.; Wenz, G. B.; Kriegel, R. M.; Koros, W. J. Penetrant transport in semicrystalline poly(ethylene furanoate) Polymer 2016, 98, 305-310 10.1016/j.polymer.2016.06.046
34. Ma, J. P.; Yu, X. F.; Xu, J.; Pang, Y. Synthesis and crystallinity of poly(butylene 2,5-furandicarboxylate) Polymer 2012, 53 (19) 4145-4151 10.1016/j.polymer.2012.07.022
35. Zhu, J.; Cai, J.; Xie, W.; Chen, P.-H.; Gazzano, M.; Scandola, M.; Gross, R. A. Poly(butylene 2,5-furan dicarboxylate), a Biobased Alternative to PBT: Synthesis, Physical Properties, and Crystal Structure Macromolecules 2013, 46 (3) 796-804 10.1021/ma3023298
36. Papageorgiou, G. Z.; Tsanaktsis, V.; Papageorgiou, D. G.; Exarhopoulos, S.; Papageorgiou, M.; Bikiaris, D. N. Evaluation of polyesters from renewable resources as alternatives to the current fossil-based polymers. Phase transitions of poly(butylene 2,5-furan-dicarboxylate) Polymer 2014, 55 (16) 3846-3858 10.1016/j.polymer.2014.06.025
37. Papageorgiou, G. Z.; Tsanaktsis, V.; Bikiaris, D. N. Synthesis of poly(ethylene furandicarboxylate) polyester using monomers derived from renewable resources: thermal behavior comparison with PET and PEN Phys. Chem. Chem. Phys. 2014, 16 (17) 7946-7958 10.1039/C4CP00518J
38. Li, Y. J.; Shimizu, H. Toughening of polylactide by melt blending with a biodegradable poly(ether)urethane elastomer Macromol. Biosci. 2007, 7 (7) 921-928 10.1002/mabi.200700027
39. Zolali, A. M.; Heshmati, V.; Favis, B. D. Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide) Macromolecules 2017, 50 (1) 264-274 10.1021/acs.macromol.6b02310
40. Bitinis, N.; Verdejo, R.; Cassagnau, P.; Lopez-Manchado, M. A. Structure and properties of polylactide/natural rubber blends Mater. Chem. Phys. 2011, 129 (3) 823-831 10.1016/j.matchemphys.2011.05.016
41. Wu, S. H. Control of Intrinsic Brittleness and Toughness of Polymers and Blends by Chemical-Structure-a Review Polym. Int. 1992, 29 (3) 229-247 10.1002/pi.4990290313
42. Juntuek, P.; Ruksakulpiwat, C.; Chumsamrong, P.; Ruksakulpiwat, Y. Effect of glycidyl methacrylate-grafted natural rubber on physical properties of polylactic acid and natural rubber blends J. Appl. Polym. Sci. 2012, 125 (1) 745-754 10.1002/app.36263
43. Kowalczyk, M.; Piorkowska, E. Mechanisms of plastic deformation in biodegradable polylactide/poly(1,4-cis-isoprene) blends J. Appl. Polym. Sci. 2011, 124 (6) 4579-4589 10.1002/app.35489
44. Kim, G. M.; Michler, G. H. Micromechanical deformation processes in toughened and particle-filled semicrystalline polymers: Part 1. Characterization of deformation processes in dependence on phase morphology Polymer 1998, 39 (23) 5689-5697 10.1016/S0032-3861(98)00089-5
45. Kim, G. M.; Michler, G. H. Micromechanical deformation processes in toughened and particle filled semicrystalline polymers. Part 2: Model representation for micromechanical deformation processes Polymer 1998, 39 (23) 5699-5703 10.1016/S0032-3861(98)00169-4
46. Jiang, L.; Wolcott, M. P.; Zhang, J. W. Study of biodegradable polyactide/poly(butylene adipate-co-terephthalate) blends Biomacromolecules 2006, 7 (1) 199-207 10.1021/bm050581q
47. Sarasua, J. R.; Arraiza, A. L.; Balerdi, P.; Maiza, I. Crystallinity and mechanical properties of optically pure polylactides and their blends Polym. Eng. Sci. 2005, 45 (5) 745-753 10.1002/pen.20331
48. Pluta, M. Morphology and properties of polylactide modified by thermal treatment, filling with layered silicates and plasticization Polymer 2004, 45 (24) 8239-8251 10.1016/j.polymer.2004.09.057
49. Jabarin, S. A. Strain-Induced Crystallization of Poly(Ethylene-Terephthalate) Polym. Eng. Sci. 1992, 32 (18) 1341-1349 10.1002/pen.760321802
50. Wojtczak, M.; Dutkiewicz, S.; Galeski, A.; Gutowska, A. Classification of aliphatic-butylene terephthalate copolyesters in relation to aliphatic/aromatic ratio Polymer 2017, 113, 119-134 10.1016/j.polymer.2017.02.054
51. Mulligan, J.; Cakmak, M. Nonlinear mechanooptical behavior of uniaxially stretched poly(lactic acid): Dynamic phase behavior Macromolecules 2005, 38 (6) 2333-2344 10.1021/ma048794f
52. Zhang, X. Q.; Schneider, K.; Liu, G. M.; Chen, J. H.; Bruning, K.; Wang, D. J.; Stamm, M. Structure variation of tensile-deformed amorphous poly(L-lactic acid): Effects of deformation rate and strain Polymer 2011, 52 (18) 4141-4149 10.1016/j.polymer.2011.07.003
53. Xu, W.; Zhang, R. Y.; Liu, W.; Zhu, J.; Dong, X.; Guo, H. X.; Hu, G. H. A Multiscale Investigation on the Mechanism of Shape Recovery for IPDI to PPDI Hard Segment Substitution in Polyurethane Macromolecules 2016, 49 (16) 5931-5944 10.1021/acs.macromol.6b01172
54. Petinakis, E.; Liu, X. X.; Yu, L.; Way, C.; Sangwan, P.; Dean, K.; Bateman, S.; Edward, G. Biodegradation and thermal decomposition of poly(lactic acid)-based materials reinforced by hydrophilic fillers Polym. Degrad. Stab. 2010, 95 (9) 1704-1707 10.1016/j.polymdegradstab.2010.05.027
55. Wang, Y.; Chiao, S. M.; Hung, T. F.; Yang, S. Y. Improvement in toughness and heat resistance of poly(lactic acid)/polycarbonate blend through twin-screw blending: Influence of compatibilizer type J. Appl. Polym. Sci. 2012, 125, E402-E412 10.1002/app.36920
56. Ahmed, J.; Varshney, S. K. Polylactides-Chemistry, Properties and Green Packaging Technology: A Review Int. J. Food Prop. 2011, 14 (1) 37-58 10.1080/10942910903125284
57. Lagaron, J. M.; Catala, R.; Gavara, R. Structural characteristics defining high barrier properties in polymeric materials Mater. Sci. Technol. 2004, 20 (1) 1-7 10.1179/026708304225010442