Heat integration including heat exchangers, combined heat and power, heat pumps, separation processes and process control

Applied Thermal Engineering

Volumn 43, Issue , 2012, Pages 1-6

  Klemeš, Jiří Jaromír ^a   Varbanov, Petar Sabev ^a  

^a UNIVERSITY OF PANNONIA   (Hungary)

Author keywords

Heat exchangers; Heat integration; Heat pumps; Integration of CHP; Integration of separation processes; Power systems and control; Thermal process design

Indexed keywords

EID: 85027953355     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2012.03.044     Document Type: Article

References (60)

1. J. Klemeš, and F. Friedler Editorial Applied Thermal Engineering 20 15-16 2000 1335
2. J. Klemeš Editorial Applied Thermal Engineering 21 13-14 2001 1281 1282
3. J. Klemeš, and S. Pierucci Editorial Applied Thermal Engineering 22 22 2002 885 887
4. J. Klemeš, and P. Stehlík Recent novel heat integration developments: improved operation, multi-period utilities systems, batch process scheduling, pressure consideration, retrofit, cost factors, energy price forecast and industrial case studies Applied Thermal Engineering 23 2003 1723 1728
5. J. Klemeš, and F. Friedler Recent novel developments in heat integration - total site, trigeneration, utility systems and cost-effective decarbonisation. Case studies waste thermal processing, pulp and paper and fuel cells Applied Thermal Engineering 25 2005 953 960
6. J. Klemeš, and P. Stehlík Recent advances on heat, chemical and process integration, multiobjective and structural optimisation Applied Thermal Engineering 26 2006 1339 1344
7. J. Klemeš, and S. Pierucci Advanced combustion, cooling and refrigeration, waste gas treatment, heat integrated separation and case studies Applied Thermal Engineering 27 2007 1133 1137
8. 2 capture and heat transfer enhancement Applied Thermal Engineering 27 2007 2627 2632
9. J. Klemeš, and S. Pierucci Emission reduction by process intensification, integration, P-graphs, micro CHP, heat pumps and advanced case studies Applied Thermal Engineering 28 16 2008 2005 2010
10. J. Klemeš, and F. Friedler Advances in process integration, energy saving and emissions reduction Applied Thermal Engineering 30 1 2010 1 5
11. J.J. Klemeš, and P.S. Varbanov Process integration for energy and water saving, increasing efficiency and reducing environmental impact Applied Thermal Engineering 30 2010 2265 2269
12. J.J. Klemeš, and P.S. Varbanov Design and operation of efficient energy systems biorefineries, waste to energy, enhanced heat transfer and fuel cell applications Applied thermal engineering 31 13 2011 (iii-vii)
13. J.J. Klemeš, P. Varbanov, S. Pierucci, and D. Huisingh Minimising emissions and energy wastage by improved industrial processes and integration of renewable energy Journal of Cleaner Production 18 9 2010 843 847
14. J.J. Klemeš, and P. Stehlík Heat transfer in industrial applications - PRES 2008 Heat Transfer Engineering 31 9 2010 707 710
15. I. Bulatov, and J.J. Klemeš Clean fuel technologies and clean and reliable energy: a summary Clean Technologies and Environmental Policy 13 4 2011 543 546
16. J.J. Klemeš, P. Stehlík, and E. Worrell Waste treatment to improve recycling and minimise environmental impact Resources, Conservation and Recycling 54 5 2010 267 270
17. J.J. Klemeš, and L.H. Lam Process integration for energy saving and pollution reduction Energy 36 8 2011 4586 4587
18. Y. Wang, R. Smith, and J.-K. Kim Heat exchanger network retrofit optimization involving heat transfer enhancement Applied Thermal Engineering 43 2012 7 13
19. K. Matsuda, S. Tanaka, M. Endou, and T. Iiyoshi Energy saving study on a large steel plant by total site based pinch technology Applied Thermal Engineering 43 2012 14 19
20. J. Klemeš, V.R. Dhole, K. Raissi, S.J. Perry, and L. Puigjaner Targeting and design methodology for reduction of fuel, power and CO2 on total sites Applied Thermal Engineering 7 1997 993 1003
21. S. Perry, J. Klemeš, and I. Bulatov Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors Energy 33 10 2008 1489 1497
22. S. Bandyopadhyay, J. Varghese, and V. Bansal Targeting for cogeneration potential through total site integration Applied Thermal Engineering 30 1 2010 6 14
23. A. Modarresi, P. Kravanja, and A. Friedl Pinch and exergy analysis of lignocellulosic ethanol, biomethane, heat and power production from straw Applied Thermal Engineering 43 2012 20 28
24. A. Modarresi, W. Wukovits, D. Foglia, and A. Friedl Effect of process integration on the exergy balance of a two-stage process for fermentative hydrogen production Journal of Cleaner Production 18 2010 63 71
25. A. Modarresi, W. Wukovits, and A. Friedl Application of exergy balances for evaluation of process configurations for biological hydrogen production Applied Thermal Engineering 30 2010 70 76
26. L. Gerber, and F. Maréchal Defining optimal configurations of geothermal systems using process design and process integration techniques Applied Thermal Engineering 43 2012 29 41
27. V. Lundberg, E. Axelsson, M. Mahmoudkhani, and T. Berntsson Process integration of near-neutral hemicellulose extraction in a Scandinavian kraft pulp mill - consequences for the steam and Na/S balances Applied Thermal Engineering 43 2012 42 50
28. R. Fornell, and T. Berntsson Process integration study of a kraft pulp mill converted to an ethanol production plant - Part A: potential for heat integration of thermal separation units Applied Thermal Engineering 35 2012 81 90
29. R. Fornell, K. Pettersson, and T. Berntsson Preliminary design and energy efficiency analysis of a kraft pulp mill converted to a biorefinery producing ethanol and DME from softwood Chemical Engineering Transactions 21 2010 1147 1152
30. M. Picón-Núnez, G.T. Polley, L. Canizalez-Dávalos, and E.K. Tamakloe Design of coolers for use in an existing cooling water network Applied Thermal Engineering 43 2012 51 59
31. A. Ghannadzadeh, S. Perry, and R. Smith Cogeneration targeting for site utility systems Applied Thermal Engineering 43 2012 60 66
32. K. Raissi Total site integration PhD Thesis 1994 UMIST Manchester, UK
33. P.S. Varbanov, and J. Klemeš Integration and management of renewables into total sites with variable supply and demand Computers and Chemical Engineering 35 9 2010 1815 1826
34. S. Sha, and M. Hurme Emergy evaluation of combined heat and power plant processes Applied Thermal Engineering 43 2012 67 74
35. R.A. Herendeen Energy analysis and EMERGY analysis - a comparison Ecological Modelling 178 1-2 2004 227 237
36. M. Bogataj, and Z. Kravanja An alternative strategy for global optimization of heat exchanger networks Applied Thermal Engineering 43 2012 75 90
37. M.L. Bergamini, N.J. Scenna, and P.A. Aguirre Global optimal structures of heat exchanger networks by piecewise relaxation Industrial & Engineering Chemistry Research 46 2007 1752 1763
38. R. Drobež, Z. Novak Pintarič, and Z. Kravanja Simultaneous synthesis of a biogas process and heat exchanger network Applied Thermal Engineering 43 2012 91 100
39. R. Drobež, Z. Novak Pintarič, B. Pahor, and Z. Kravanja Simultaneous heat integration and the synthesis of biogas production from animal waste, Asia-Pac Journal of Chemical Engineering 6 2011 734 749
40. T. Ma, Y.M. Zeng, and Q. Wang Stress analysis of internally finned bayonet tube in a high temperature heat exchanger Applied Thermal Engineering 43 2012 101 108
41. T. Ma, L. Du, D. Zhang, Y. Ji, M. Zeng, and Q. Wang Study on reliability of high temperature heat exchangers Chemical Engineering Transactions 25 2011 351 356 10.3303/CET1125059
42. W. Zhang, J.J. Klemeš, and J.-K. Kim Design and optimisation of dual-mode heat pump systems using natural fluids Applied Thermal Engineering 43 2012 109 117
43. M. Pavlas, P. Stehlík, J. Oral, J. Klemeš, J.-K. Kim, and B. Firth Heat integrated heat pumping for biomass gasification processing Applied Thermal Engineering 30 1 2012 30 35
44. H. Becker, A. Vuillermoz, and F. Maréchal Heat pump integration in a cheese factory Applied Thermal Engineering 43 2012 118 127
45. S. Gul, and M. Harasek Energy saving in sugar manufacturing through the integration of environmental friendly new membrane processes for thin juice pre-concentration Applied Thermal Engineering 43 2012 128 133
46. D. Krajnc, M. Mele, and P. Glavic Improving the economic and environmental performances of the beet sugar industry in Slovenia: increasing fuel efficiency and using by-products for ethanol Journal of Cleaner Production 15 13-14 2007 1240 1252
47. A. Makaruk, M. Miltner, and M. Harasek Membrane gas permeation in the upgrading of renewable hydrogen from biomass steam gasification gases Applied Thermal Engineering 43 2011 134 140
48. S. Stünkel, D. Illmer, A. Drescher, and G. Wozny On the design, development and operation of an energy efficient CO2 removal for the oxidative coupling of methane in a miniplant scale Applied Thermal Engineering 43 2012 141 147
49. D. Colorado, J.A. Hernández, and B. Alonso Hybrid evaporator model: analysis under uncertainty by means of Monte Carlo method Applied Thermal Engineering 43 2012 148 152
50. X. Ding, W. Cai, L. Jia, and C. Wen Evaporator modeling e a hybrid approach Applied Energy 86 2009 81 88
51. Y. Kansha, A. Kishimoto, and A. Tsutsumi Application of the self-heat recuperation technology to crude oil distillation Applied Thermal Engineering 43 2012 153 157
52. K. Matsuda, K. Kawazuishi, Y. Hirochi, R. Sato, Y. Kansha, C. Fushimi, Y. Shikatani, H. Kunikiyo, and A. Tsutsumi Advanced energy saving in the reaction section of hydro-desulfurization process with self-heat recuoperation technology Applied Thermal Engineering 30 2010 2300e2306
53. B. Ćosić, N. Markovska, G. Krajačić, V. Taseska, and N. Dui&cacute Environmental and economic aspects of higher RES penetration into Macedonian power system Applied Thermal Engineering 43 2012 158 162
54. B. Ćosić, Z. Stanić, and N. Dui&cacute Geographic Distribution of Economic Potential of Agricultural and Forest Biomass Residual for Energy Use: Case Study Croatia, Energy 36 4 2011 2017 2028
55. M. Dvořák, and P. Havel Combined heat and power production planning under liberalized market conditions Applied Thermal Engineering 43 2012 163 173
56. Gurobi Optimizer 4.6. www.gurobi.com/html/products.html, accessed 12.03.2012.
57. L.R. Tóth, L. Nagy, and F. Szeifert Nonlinear inversion-based control of a distributed parameter heating system Applied Thermal Engineering 43 2012 174 179
58. F. Szeifert, T. Chován, and L. Nagy Control structures based on constrained inverses Hungarian Journal of Industrial Chemistry 35 2007 47 55
59. CHISA 2012 Congress www.chisa.cz/2012/ accessed 12.03.2012.
60. Conference PRES www.conferencepres.com accessed 12.03.2012.