Impact of different catalysis supported by oyster shells on the pyrolysis of tyre wastes in a single and a double fixed bed reactor

Waste Management

Volumn 67, Issue , 2017, Pages 288-297

  Kordoghli, Sana ^a,b,c   Khiari, Besma ^c   Paraschiv, Maria ^d,e   Zagrouba, Fethi ^c   Tazerout, Mohand ^b  

^a UNIVERSITY OF MONASTIR   (Tunisia)

^b ECOLE DES MINES DE NANTES   (France)

^c UNIVERSITY OF CARTHAGE   (Tunisia)

^d Institute of Science Education   (Romania)

^e UNIVERSITY POLITEHNICA OF BUCHAREST   (Romania)

Author keywords

Energy recovery; Levels of beds; Oyster shells; Supported catalyst pyrolysis; Tyre wastes

Indexed keywords

ALUMINUM; CALCIUM CARBONATE; CATALYSTS; CHEMICAL REACTORS; CRASHWORTHINESS; ENVIRONMENTAL IMPACT; GASES; MOLLUSCS; PYROLYSIS; RADIOACTIVE WASTE DISPOSAL; SHELLFISH; SHELLS (STRUCTURES); TIRES;

ENERGY RECOVERY; LEVELS OF BEDS; OVERALL REACTIONS; OYSTER SHELL; PYROLYSIS PRODUCTS; THERMAL PYROLYSIS; TREATMENT AND DISPOSAL; TYRE WASTES;

CATALYST SUPPORTS;

ALUMINUM OXIDE; CALCIUM CARBONATE; MAGNESIUM OXIDE; RUBBER; SULFUR; ZEOLITE;

CATALYSIS; CATALYST; MOLLUSC; PYROLYSIS; SHELL; TIRE; WASTE;

ANIMAL SHELL; ARTICLE; BIOREACTOR; CATALYSIS; CHEMICAL BOND; CHEMICAL COMPOSITION; CONTENT ANALYSIS; DECOMPOSITION; ENERGY RECOVERY; GAS WASTE; HEATING; INDUSTRIAL WASTE; LIQUID; MOLECULAR WEIGHT; MOTOR VEHICLE TIRE; PRIORITY JOURNAL; PYROLYSIS; TUNISIA; ANIMAL; MOTOR VEHICLE; OYSTER; PROCEDURES; SOLID WASTE; WASTE DISPOSAL;

TUNISIA;

OSTREIDAE;

ANIMALS; CATALYSIS; MOTOR VEHICLES; OSTREIDAE; REFUSE DISPOSAL; SOLID WASTE; ZEOLITES;

EID: 85020379622     PISSN: 0956053X     EISSN: 18792456     Source Type: Journal    
DOI: 10.1016/j.wasman.2017.06.001     Document Type: Article

References (40)

1. Abdulkadir, A., Recep, Y., Rotary kiln and batch pyrolysis of waste tyre to produce gasoline and diesel like fuels. Energy Convers. Manage. 111 (2016), 261–270.
2. Acevedo, B., Barriocanal, C., Fuel-oils from co-pyrolysis of scrap tyres with coal and a bituminous waste: influence of oven configuration. Fuel 125 (2014), 155–163.
3. Aylon, E., Fernandez-Colino, A., Murillo, R., Navarro, M.V., Garcıa, T., Mastral, A.M., Valorisation of waste tyre by pyrolysis in a moving bed reactor. Waste Manage. 30 (2010), 1220–1224.
4. Conesa, J.A., Marcilla, A., Font, R., Caballero, J.A.J., Kinetic model for the continuous pyrolysis of two types of polyethylene in a fluidized bed reactor. J. Anal. Appl. Pyrol. 40–41 (1997), 419–431.
5. Dai, X., Yin, X., Wu, C., Zhang, W., Chen, Y., Pyrolysis of waste tyres in a circulating fluidized-bed reactor. Energy 26:4 (2001), 385–399.
6. Diez, C., Sanchez, M.E., Haxaire, P., Martinez, O., Moran, A.J., Pyrolysis of tyres: a comparison of the results from a fixed-bed laboratory reactor and a pilot plant (rotatory reactor). J. Anal. Appl. Pyrol. 74:1–2 (2005), 254–258.
7. Daniel, J., Murillo, R., García, T., Veses, A., Demonstration of the waste tyre pyrolysis process on pilot scale in a continuous auger reactor. J. Hazard. Mater. 261 (2013), 637–645.
8. Fernández, A.M., Barriocanal, C., Alvarez, R., Pyrolysis of a waste from the grinding of scrap tyres. J. Hazard. Mater. 203–204 (2012), 236–243.
9. Islam, M.R., Islam, M.N., Mustafi, N.N., Rahim, M.A., Haniu, H., Thermal recycling of solid tyre wastes for alternative liquid fuel: the first commercial step in Bangladesh. Procedia Eng. 56 (2013), 573–582.
10. Kaminsky, W., Mennerich, C.J., Pyrolysis of synthetic tyre rubber in a fluidised-bed reactor to yield 1,3-butadiene, styrene and carbon black. J. Anal. Appl. Pyrol. 58–59 (2001), 803–811.
11. Karatas, H., Olgun, H., Akgun, F., Experimental results of gasification of waste tyre with air & steam and steam in a bubbling fluidized bed gasifier. Fuel Process. Technol. 102 (2012), 166–174.
12. Kordoghli, S., Paraschiv, M., Tazerout, M., Khiari, B., Zagrouba, F., Novel catalytic systems for waste tyres pyrolysis: optimization of gas fraction. J. Energy Resour. Technol. 139:3 (2016), 1–11, 10.1115/1.4034979 (JERT-16-1090).
13. Kordoghli, S., Paraschiv, M., Kuncser, R., Tazerout, M., Zagrouba, F., Catalysts influence on thermochemical decomposition of waste tyres. Environ. Progr. Sustain. Energy, 2017, 10.1002/ep.12605.
14. Li, S.Q., Yao, Q., Chi, Y., Yan, J.H., Cen, K.F., Pilot-scale pyrolysis of scrap tyres in a continuous rotary kiln reactor. Ind. Eng. Chem. Res. 43:17 (2004), 5133–5145.
15. Lopez, G., Aguado, R., Olazar, M., Arabiourrutia, M., Bilbao, J., Kinetics of scrap tyre pyrolysis under vacuum conditions. Waste Manage. 29:10 (2009), 2649–2655.
16. Martinez, D.M., Puy, N., Murillo, R., Garcia, T., Navarro, M.V., Mastral, A.M., Waste tyre pyrolysis – a review. Renew. Sustain. Energy Rev. 23 (2013), 179–213.
17. Martínez, J.D., Veses, A., Mastral, A.M., Murillo, R., Navarro, M.V., Puy, N., Artigues, A., Bartrolí, J., García, T., Copyrolysis of biomass with waste tyres: upgrading of liquid bio-fuel. Fuel Process. Technol. 119 (2014), 263–271.
18. Michel, R., Rapagnà, S., Marcello, M.D., Burg, P., Matt, M., Courson, C., Gruber, R., Catalytic steam gasification of miscanthus × giganteus in fluidised bed reactor on olivine based catalysts. Fuel Process. Technol. l92:6 (2011), 1169–1177.
19. Onay, O., Koca, H., Determination of synergetic effect in co-pyrolysis of lignite and waste tyre. Fuel 150 (2015), 169–174.
20. Ono, A., Kurita, M., Nagashima, T., Horio, M., Evaluation of waste pyrolysis characteristics in a pressurized fluidized bed reactor. Waste Manage. 21:5 (2001), 451–456.
21. Oyedun, A., Lam, K., Fittkau, M., Hui, C., Optimisation of particle size in waste tyre pyrolysis. Fuel 95 (2012), 417–424.
22. Poyraz, S., Liu, Z., Liu, Y., Zhang, X., Devulcanization of scrap ground tyre rubber and successive carbon nanotube growth by microwave irradiation. Curr. Org. Chem. 17:20 (2013), 2243–2248.
23. Rofiqul Islam, M., Parveen, M., Haniu, H., Islam Sarker, M.R., Innovation in pyrolysis technology for management of scrap tyres: a solution of energy and environment. Int. J. Environ. Sci. Dev. 1:1 (2010), 89–96.
24. Roy, C., Chaala, A., Darmstadt, H.J., The vacuum pyrolysis of used tyres: end-uses for oil and carbon black products. J. Anal. Appl. Pyrol. 51:1–2 (1999), 201–221.
25. Roy, C., Darmstadt, H., Bellanal, B., Amen-Chen, C., Characterization of naphtha and carbon black obtained by vacuum pyrolysis of polyisoprene rubber. Fuel Process. Technol. 50:1 (1997), 87–103.
26. San Miguel, G., Aguado, J., Serrano, D.P., Escola, J.M., Thermal and catalytic conversion of used tyre rubber and its polymeric constituents using Py-GC/MS. Appl. Catal. B: Environ. 64:3–4 (2006), 209–219.
27. Shah, J., Jan, M.R., Mabood, F., Recovery of value-added products from the catalytic pyrolysis of waste tyre. Energy Convers. Manage. 50:4 (2009), 991–994.
28. Sermin, O., Mihai, B., Cornelia, V., Jale, Y., Copyrolysis of scrap tyres with oily wastes. J. Anal. Appl. Pyrol. 94 (2012), 184–189.
29. Shen, B., Wu, C., Wang, R., Guo, B., Liang, C., Pyrolysis of scrap tyres with zeolite USY. J. Hazard. Mater. 137:2 (2006), 1065–1073.
30. Shen, B., Wu, C., Guo, B., Wang, R., Liang, C., Pyrolysis of waste tyres with zeolite USY and ZSM-5 catalysts. Appl. Catal. B: Environ. 73:1–2 (2007), 150–157.
31. Shen, B., Wu, C., Liang, C., Guo, B., Wang, R., Pyrolysis of waste tyres: the influence of USY catalyst/tyre ratio on products. J. Anal. Appl. Pyrol. 78:2 (2007), 243–249.
32. Sienkiewicz, M., Janik, H., Borzedowska-Labuda, K., Kucinska-Lipka, Environmentally friendly polymer-rubber composites obtained from waste tyres: a review. J. Clean Prod. 147 (2017), 560–571.
33. Sienkiewicz, M., Kucinska-lipka, J., Janik, H., Balas, A., Progress in used tyres management in the European Union: a review. Waste Manage. 32:10 (2012), 1742–1751.
34. 2 atmospheres. Fuel 165 (2016), 272–278.
35. Ucar, S., Karagoz, S., Ozkan, A.R., Yanik, J., Evaluation of two different scrap tyres as hydrocarbon source by pyrolysis. Fuel 84:14-15 (2005), 1884–1892.
36. William, P.T., Brindle, A.J., Fluidised bed pyrolysis and catalytic pyrolysis of scrap tyre. Environ. Technol. 24:7 (2003), 921–929.
37. Williams, P.T., Brindle, A.J., Catalytic pyrolysis of tyres: influence of catalyst temperature. Fuel 81:18 (2002), 2425–2434.
38. Williams, P.T., Brindle, A.J., Fluidised bed catalytic pyrolysis of scrap tyres: influence of catalyst: tyre ratio and catalyst temperature. Waste Manage. Res. 20:6 (2002), 546–555.
39. Williams, P.T., Elbaba, I.F., Wu, C., Onwudili, J.A., 2010. High yield hydrogen from the pyrolysis-catalytic gasification of scrap tyres. In: Third International Symposium on Energy from Biomass and Waste, Venice, Italy.
40. Zhang, X., Wang, T., Ma, L., Chang, J., Vacuum pyrolysis of waste tyres with basic additives. Waste Manage. 28:11 (2008), 2301–2310.