Environmentally benign green composites based on epoxy resin/bacterial cellulose reinforced glass fiber: Fabrication and mechanical characteristics

Polymer Testing

Volumn 61, Issue , 2017, Pages 150-161

  Vu, Cuong Manh ^a   Nguyen, Dinh Duc ^b,c   Sinh, Le Hoang ^b   Pham, Tien Duc ^d   Pham, Lanh Thi ^e   Choi, Hyoung Jin ^f  

^a TON DUC THANG UNIVERSITY   (Viet Nam)

^b DUY TAN UNIVERSITY   (Viet Nam)

^c Kyonggi University   (South Korea)

^d VIETNAM NATIONAL UNIVERSITY   (Viet Nam)

^e GRADUATE UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Viet Nam)

^f Inha University   (South Korea)

Author keywords

Bacterial cellulose; Bio based composite; Epoxy resin; Fatigue life; Mode I interlaminar fracture toughness; Nata de coco

Indexed keywords

CELLULOSE; CRACKS; FABRICATION; FATIGUE OF MATERIALS; FIBERS; FRACTURE; FRACTURE TOUGHNESS; GLASS; GLASS FIBERS; MECHANICAL PROPERTIES; MECHANISMS; SCANNING ELECTRON MICROSCOPY; ULTRASONIC TESTING;

BACTERIAL CELLULOSE; BIO-BASED COMPOSITES; ENVIRONMENTALLY BENIGN; INTERLAMINAR FRACTURE TOUGHNESS; MECHANICAL CHARACTERISTICS; NATA DE COCO; SCANNING ELECTRON MICROSCOPY IMAGE; ULTRASONIC TECHNIQUES;

EPOXY RESINS;

BACTERIA; CELLULOSE; COMPOSITES;

EID: 85019349929     PISSN: 01429418     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymertesting.2017.05.013     Document Type: Article

References (32)

1. Jonas, R., Luiz, L.F., Production and application of microbial cellulose. Polym. Degrad. Stab. 59 (1998), 101–106.
2. Kahlon, R.S., Vyas, S.V., Isolation and identification of acetic acid bacteria from different ecosystems. Proc. Indian Acad. Sci. - Sect. B 74:6 (1971), 293–300.
3. Faparusi, S.I., Microorganisms from oil palm trees (Elaeis guineensis) tape holes. J. Food Sci. 39 (1974), 755–757.
4. Bielecki, S., Krystynowicz, A., Turkiewicz, M., Kalinowska, H., Bacterial Cellulose. 2001, Institute of Technical Biochemistry, Technical Chemistry of Lódz, Stefanowskiego, 37–46.
5. Tang, C., Liu, H., Cellulose nanofiber reinforced poly(vinyl alcohol) composite film with high visible light transmittance. Compos. Part A Appl. Sci. Manuf. 39:10 (2008), 1638–1643.
6. Lee, K.Y., Blaker, J.J., Bismarck, A., Surface functionalisation of bacterial cellulose as the route to produce green polylactide nanocomposites with improved properties. Compos. Sci. Technol. 69:15–16 (2009), 2724–2733.
7. Brown, A.J., On an acetic ferment which forms cellulose. J. Chem. Soc. Trans. 49 (1886), 432–439.
8. Iguchi, M., Yamanaka, S., Budhiono, A., Bacterial cellulose – a masterpiece of nature's art. J. Mater. Sci. 35 (2000), 261–270.
9. Kim, D.Y., Nishiyama, Y., Kuga, S., Surface acetylation of bacterial cellulose. Cellulose 9 (2002), 361–367.
10. Guhados, G., Wan, W., Hutter, J.L., Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy. Langmuir 21 (2005), 6642–6646.
11. Hsieh, Y.C., Yano, H., Nogi, M., Eichhorn, S.J., An estimation of the Young's modulus of bacterial cellulose filaments. Cellulose 15 (2008), 507–513.
12. Toda, K., Asakura, T., Fukaya, M., Entani, E., Kawamura, Y., Cellulose production by acetic acid-resistant acetobacter xylinum. J. Ferment. Bioeng. 84 (1997), 228–231.
13. Brown, R.M., Willison, J.H., Richarson, C.L., Cellulose biosynthesis in Acetobacter xylinum: visualization of the site of synthesis and direct measurement of the in vivo process. Proceeding Natl. Acad. Sciece U. S. A., 1976(73), 1976, 4565.
14. Luddee, M., Pivsa-Art, S., Sirisansaneeyakul, S., Pechyen, C., Particle size of ground bacterial cellulose affecting mechanical, thermal, and moisture barrier properties of PLA/BC biocomposites. Energy Procedia 56 (2014), 211–218.
15. Gea, S., Bilotti, E., Reynolds, C.T., Soykeabkeaw, N., Peijs, T., Bacterial cellulose–poly(vinyl alcohol) nanocomposites prepared by an in-situ process. Mater. Lett. 64 (2010), 901–904.
16. Quero, F., Nogi, M., Yano, H., Abdulsalami, K., Holmes, S.M., Sakakini, B.H., Eichhorn, S.J., Optimization of the mechanical performance of bacterial cellulose/poly(l-lactic) acid composites. ACS Appl. Material Interfaces 2 (2010), 321–330.
17. Gabr, M.H., Elrahman, M.A., Okubo, K., Fujii, T., A study on mechanical properties of bacterial cellulose/epoxy reinforced by plain woven carbon fiber modified with liquid rubber. Compos. Part A: Appl. Sci. Manuf. 41 (2010), 1263–1271.
18. Gindl, W., Keckes, J., Tensile properties of cellulose acetate butyrate composites reinforced with bacterial cellulose. Compos. Sci. Technol. 64:15 (2004), 2407–2413.
19. Martins, I.M.G., Magina, S.P., Oliveira, L., Freire, C.S.R., Silvestre, A.J.D., Neto, C.P., Gandini, A., New biocomposites based on thermoplastic starch and bacterial cellulose. Compos. Sci. Technol. 69:13 (2009), 2163–2168.
20. Prusty, R.K., Ghosh, S.K., Rathore, D.K., Ray, B.C., Reinforcement effect of graphene oxide in glass fibre/epoxy composites at in-situ elevated temperature environments: an emphasis on graphene oxide content. Compos. Part A Appl. Sci. Manuf. 95 (2017), 40–53.
21. Helmy, S., Hoa, S.V., Tensile fatigue behavior of tapered glass fiber reinforced epoxy composites containing nanoclay. Compos. Sci. Technol. 102 (2014), 10–19.
22. Withers, G.J., Yu, Y., Khabashesku, V.N., Cercone, L., Hadjiev, V.G., Souza, J.M., Davis, D.C., Improved mechanical properties of an epoxy glass–fiber composite reinforced with surface organomodified nanoclays. Compos. Part B Eng. 72 (2015), 175–182.
23. Böger, L., Sumfleth, J., Hedemann, H., Schulte, K., Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy. Compos. Part A Appl. Sci. Manuf. 41 (2010), 1419–1424.
24. Akinyede, O., Mohan, R., Kelkar, A., Sankar, J., Static and fatigue behavior of epoxy/fiberglass composites hybridized with alumina nanoparticles. J. Compos. Mater. 43:7 (2009), 769–781.
25. Grimmer, C., Dharan, C.K.H., High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites. J. Mater. Sci. 43 (2008), 4487–4492.
26. Fan, Z., Santare, M.H., Advani, S.G., Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes. Compos. Part A Appl. Sci. Manuf. 39 (2008), 540–554.
27. Wichmann, M.H.G., Sumfleth, J., Gojny, F.H., Quaresimin, M., Fiedler, B., Schulte, K., Glass-fibre-reinforced composites with enhanced mechanical and electrical properties – benefits and limitations of a nanoparticle modified matrix. Eng. Fract. Mech. 73 (2006), 2346–2359.
28. Yano, H., Sugiyama, J., Nakagaito, A.N., Nogi, M., Matsuura, T., Hikita, M., Handa, K., Optically transparent composites reinforced with networks of bacterial nanofibers. Adv. Mater. 17 (2005), 153–155.
29. Siddiqui, N.A., Woo, R.S.C., Kim, J.K., Leung, C.C.K., Munir, A., Mode-I interlaminar fracture behavior and mechanical properties of CFRP with nanoclay-filled epoxy matrix. Compos. Part A Appl. Sci. Manuf. 38 (2007), 449–460.
30. Grabr, M.H., Elrahamn, M.A., Okubo, K., Fujii, T., Interfacial adhesion improvement of plain woven carbon fiber reinforced epoxy filled with micro-fibrillated cellulose by addition of liquid rubber. J. Mater. Sci. 45 (2010), 3841–3850.
31. Boger, L., Sumfleth, J., Hedemann, H., Schulte, K., Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy. Compos. Part A Appl. Sci. Manuf. 41 (2010), 1419–1424.
32. Jen, Y.M., Wang, Y.C., Stress concentration effect on the fatigue properties of carbon nanotube/epoxy composites. Compos. Part B Eng. 43 (2012), 1687–1694.