The durability of cementitious composites containing microencapsulated phase change materials

Cement and Concrete Composites

Volumn 81, Issue , 2017, Pages 66-76

  Wei, Zhenhua ^a   Falzone, Gabriel ^a   Wang, Bu ^a   Thiele, Alexander ^a   Puerta Falla, Guillermo ^a   Pilon, Laurent ^a   Neithalath, Narayanan ^b   Sant, Gaurav ^a,c  

^a University of California   (United States)

^b Arizona State University   (United States)

^c UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Cement paste; Concrete; Durability; Enthalpy; Phase change materials

Indexed keywords

CEMENTS; CONCRETES; DURABILITY; ENTHALPY; MICROENCAPSULATION; SHRINKAGE; WATER ABSORPTION;

CEMENT PASTE; CEMENTITIOUS COMPOSITES; CHEMICAL INTERACTIONS; DRYING SHRINKAGES; MECHANICAL DAMAGES; MICROENCAPSULATED PHASE CHANGE MATERIAL; MOISTURE MOVEMENT; PHASE CHANGE ENTHALPY;

PHASE CHANGE MATERIALS;

EID: 85019020065     PISSN: 09589465     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconcomp.2017.04.010     Document Type: Article

References (57)

1. [1] Isaac, M., van Vuuren, D.P., Modeling global residential sector energy demand for heating and air conditioning in the context of climate change. Energy Policy 37 (2009), 507–521.
2. [2] Farid, M.M., Khudhair, A.M., Razack, S.A.K., Al-Hallaj, S., A review on phase change energy storage: materials and applications. Energy Convers. Manage 45 (2004), 1597–1615.
3. [3] Khudhair, A.M., Farid, M.M., A review on energy conservation in building applications with thermal storage by latent heat using phase change materials. Energy Convers. Manage 45 (2004), 263–275.
4. [4] Oro, E., de Gracia, A., Castell, A., Farid, M.M., Cabeza, L.F., Review on phase change materials (PCMs) for cold thermal energy storage applications. Appl. Energy 99 (2012), 513–533.
5. [5] Zalba, B., Marin, J.M., Cabeza, L.F., Mehling, H., Review on thermal energy storage with phase change: materials, heat transfer analysis and applications. Appl. Therm. Eng. 23 (2003), 251–283.
6. [6] Thiele, A.M., Wei, Z., Falzone, G., Young, B.A., Neithalath, N., Sant, G., Pilon, L., Figure of merit for the thermal performance of cementitious composites containing phase change materials. Cem. Concr. Comp. 65 (2016), 214–226.
7. [7] Zhang, D.W., Furuuchi, H., Hori, A., Ueda, T., Fatigue degradation properties of PCM-concrete interface. J. Adv. Concr. Technol. 7 (2009), 425–438.
8. [8] Su, J.-F., Wang, X.-Y., Dong, H., Micromechanical properties of melamine-formaldehyde microcapsules by nanoindentation: effect of size and shell thickness. Mater. Lett. 89 (2012), 1–4.
9. [9] Li, W., Song, G., Tang, G., Chu, X., Ma, S., Liu, C., Morphology, structure and thermal stability of microencapsulated phase change material with copolymer shell. Energy 36 (2011), 785–791.
10. [10] Aguayo, M., Das, S., Maroli, A., Kabay, N., Mertens, J.C.E., Rajan, S.D., Sant, G., Chawla, N., Neithalath, N., The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: experiments and finite element simulations. Cem. Concr. Comp. 73 (2016), 29–41.
11. [11] Chen, J., Liu, F.J., Zheng, Y.F., Review on phase change material slurries. Adv. Mater. Res. 860–863 (2014), 946–951.
12. [12] Fernandes, F., Manari, S., Aguayo, M., Santos, K., Oey, T., Wei, Z., Falzone, G., Neithalath, N., Sant, G., On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials. Cem. Concr. Comp. 51 (2014), 14–26.
13. [13] Meshgin, P., Xi, Y., Li, Y., Utilization of phase change materials and rubber particles to improve thermal and mechanical properties of mortar. Constr. Build. Mater 28 (2012), 713–721.
14. [14] Hunger, M., Entrop, A.G., Mandilaras, I., Brouwers, H.J.H., Founti, M., The behavior of self-compacting concrete containing micro-encapsulated phase change materials. Cem. Concr. Res. 31 (2009), 731–743.
15. [15] Sari, A., Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications. Energy Convers. Manage 44 (2003), 2277–2287.
16. [16] Skalny, J., Jawed, I., Taylor, H.F.W., Studies on hydration of cement: recent developments. World Cem. Technol. 8 (1978), 183–186.
17. [17] Bye, G.C., Portland Cement: Composition, Production and Properties. 1999, Thomas Telford Publishing, London.
18. [18] Bullard, J.W., Jennings, H.M., Livingston, R.A., Nonat, A., Scherer, G.W., Schweitzer, J.S., Scrivener, K.L., Thomas, J.J., Mechanisms of cement hydration. Cem. Concr. Res. 41 (2011), 1208–1223.
19. [19] Macphee, D.E., Lachowski, E.E., Taylor, A.H., Brown, T.J., Microstructural development in pore reduced cement (PRC). MRS Proceedings, vol. 245, 1991, 303–308.
20. [20] Taylor, S.C., Hoff, W.D., Wilson, M.A., Green, K.M., Anomalous water transport properties of Portland and blended cement-based materials. J. Mater. Sci. Lett. 18 (1999), 1925–1927.
21. [21] Brew, D.R.M., de Beer, F.C., Radebe, M.J., Nshimirimana, R., McGlinn, P.J., Aldridge, L.P., Payne, T.E., Water transport through cement-based barriers-A preliminary study using neutron radiography and tomography. Nucl. Instrum. Methods Phys. Res. A 605 (2009), 163–166.
22. [22] Henkensiefken, R., Castro, J., Bentz, D., Nantung, T., Weiss, J., Water absorption in internally cured mortar made with water-filled lightweight aggregate. Cem. Concr. Res. 39 (2009), 883–892.
23. [23] Castro, J., Bentz, D., Weiss, J., Effect of sample conditioning on the water absorption of concrete. Cem. Concr. Comp. 33 (2011), 805–813.
24. [24] Hall, C., Hoff, W.D., Taylor, S.C., Wilson, M.A., Yoon, B.G., Reinhardt, H.W., Sosoro, M., Meredith, P., Donald, A.M., Water anomaly in capillary liquid absorption by cement-based materials. J. Mater. Sci. Lett. 14 (1995), 1178–1181.
25. [25] Wang, L.C., Analytical methods for prediction of water absorption in cement-based material. China Ocean. Eng. 23 (2009), 719–728.
26. [26] Stockett, A.L., Schneide, A.M., Mardulie, F.J., An analysis of drying shrinkage data for Portland cement mortar and concrete. J. Mater 2 (1967), 829–842.
27. [27] Bisschop, J., van Mier, J.G.M., Effect of aggregates on drying shrinkage microcracking in cement-based composites. Mater. Struct. 35 (2002), 453–461.
28. [28] Abyaneh, S.D., Wong, H.S., Buenfeld, N.R., Computational investigation of capillary absorption in concrete using a three-dimensional mesoscale approach. Comput. Mater. Sci. 87 (2014), 54–64.
29. [29] Hobbs, D.W., The dependence of the bulk modulus, Young's modulus, creep, shrinkage, and thermal expansion of concrete upon aggregate volume concentration. Mater. Struct. 4 (1971), 107–114.
30. [30] Sakulich, A.R., Bentz, D.P., Increasing the service life of bridge decks by incorporating phase-change materials to reduce freeze-thaw cycles. J. Mater. Civ. Eng. 24 (2012), 1034–1042.
31. [31] ASTM Standard C150/C150M: Standard Specification for Portland Cement, 2016, ASTM International, West Conshohocken, PA.
32. [32] ASTM Standard C192/C192M: Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, 2012, ASTM International, West Conshohocken, PA.
33. [33] ASTM Standard C778: Standard Specification for Standard Sand, 2013, ASTM International, West Conshohocken, PA.
34. [34] Ferraris, C.F., Hackley, V.A., Avilés, A.I., Measurement of particle size distribution in portland cement powder: analysis of ASTM round robin studies. Cem. Concr. Aggreg 26 (2004), 1–11.
35. [35] Gao, G., Moya, S., Lichtenfeld, H., Casoli, A., Fiedler, H., Donath, E., Mohwald, H., The decomposition process of melamine formaldehyde cores: the key step in the fabrication of ultrathin polyelectrolyte multilayer capsules. Macromol. Mater. Eng. 286 (2001), 355–361.
36. [36] Ghosh, G., Dispersion-equation coefficients for the refractive index and birefringence of calcite and quartz crystals. Opt. Commun. 163 (1999), 95–102.
37. [37] ASTM Standard E1269: Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry, 2011, ASTM International, West Conshohocken, PA.
38. [38] ASTM Standard C1585: Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-cement Concretes, 2012, ASTM International, West Conshohocken, PA.
39. [39] ASTM Standard C157: Standard Test Method for Length Change of Hardened Hydraulic-cement Mortar and Concrete, 2014, ASTM International, West Conshohocken, PA.
40. [40] Ukrainczyk, N., Kurajica, S., Sipusic, J., Thermophysical comparison of five commercial paraffin waxes as latent heat storage materials. Chem. Biochem. Eng. Q. 24 (2010), 129–137.
41. [41] ASTM Standard C305: Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, 2014, ASTM International, West Conshohocken, PA.
42. [42] Mindess, S., Young, J.F., Darwin, D., Concrete. second ed., 2003, Prentice Hall, New Jersey.
43. [43] Bauer, D.R., Melamine Formaldehyde cross-linker: characterization, network formation and cross-link degradation. Prog. Org. Coat. 14 (1986), 193–218.
44. [44] Li, X.H., Yang, S.Z., Xiang, W.D., Shi, Q., A novel porous supramolecular complex constructed by the co-crystallization of melamine and sulfate via hydrogen bonds and aromatic pi-pi interaction. Struct. Chem. 18 (2007), 661–666.
45. [45] Hall, C., Water sorptivity of mortars and concretes: a review. Mag. Concr. Res. 41 (1989), 51–61.
46. [46] Xi, Y., Bažant, Z.P., Molina, L., Jennings, H.M., Moisture diffusion in cementitious materials Moisture capacity and diffusivity. Adv. Cem. Based Mater 1 (1994), 258–266.
47. [47] Neithalath, N., Analysis of moisture transport in mortars and concrete using sorption-diffusion approach. ACI Mater. J. 103 (2006), 209–217.
48. [48] Hall, C., Hoff, W.D., Wilson, M.A., Effect of nonsorptive inclusions on capillary absorption by a porous material. J. Phys. D. Appl. Phys. 26 (1993), 31–34.
49. [49] Powers, T.C., Brownyard, T.L., Studies of the physical properties of hardened portland cement paste. J. Am. Concr. Inst. Proc. 43 (1947), 469–504.
50. [50] Jensen, O.M., Hansen, P.F., Water-entrained cement-based materials I: principle and theoretical background. Cem. Concr. Res. 31 (2001), 647–654.
51. [51] Young, J.F., Mindess, S., Bentur, A., Gray, R., The Science and Technology of Civil Engineering Materials. 1998, Prentice Hall, New Jersey.
52. [52] Falzone, G., Puerta Falla, G., Wei, Z., Zhao, M., Kumar, A., Bauchy, M., Neithalath, N., Pilon, L., Sant, G., The influences of soft and stiff inclusions on the mechanical properties of cementitious composites. Cem. Concr. Comp. 71 (2016), 153–165.
53. [53] De Schutter, G., Taerwe, L., Degree of hydration-based description of mechanical properties of early age concrete. Mater. Struct. 29 (1996), 335–344.
54. [54] Hossain, M., Ketata, C., Experimental study of physical and mechanical properties of natural and synthetic waxes using uniaxial compressive strength test. Proceedings of Third International Conference on Modeling, Simulations and Applied Optimalization, 2009, 1–5.
55. [55] Chen, X.Q., Zhang, S.L., Wagner, G.J., Ding, W.Q., Ruoff, R.S., Mechanical resonance of quartz microfibers and boundary condition effects. J. Appl. Phys. 95 (2004), 4823–4828.
56. [56] Hill, R., The elastic behaviour of a crystalline aggregate. Proc. Phys. Soc. Sect. A 65 (1952), 349–354.
57. [57] Young, B.A., Wei, Z., Rubalcava-Cruz, J., Falzone, G., Kumar, A., Neithalath, N., Sant, G., Pilon, L., A general method for retrieving thermal deformation properties of microencapsulated phase change materials or other particulate inclusions in cementitious composites. Mater. Des. 126 (2017), 259–267.