Patterning Curved Three-Dimensional Structures with Programmable Kirigami Designs

Journal of Applied Mechanics, Transactions ASME

Volumn 84, Issue 6, 2017, Pages

  Wang, Fei ^a   Guo, Xiaogang ^a   Xu, Jingxian ^a   Zhang, Yihui ^a   Chen, C Q ^a  

^a TSINGHUA UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

FINITE ELEMENT METHOD; GEOMETRY; INVERSE PROBLEMS;

CONTROLLED SHRINKAGES; CURVATURE DISTRIBUTIONS; FINITE ELEMENT SIMULATIONS; INVERSE DESIGN METHODS; ROTATIONAL SYMMETRIES; THREE-DIMENSIONAL (3D) GEOMETRY; THREE-DIMENSIONAL STRUCTURE; TWO DIMENSIONAL (2 D);

DESIGN;

EID: 85018624892     PISSN: 00218936     EISSN: 15289036     Source Type: Journal    
DOI: 10.1115/1.4036476     Document Type: Article

References (49)

1. Felton, S., Tolley, M., Demaine, E., Rus, D., Wood, R., 2014, "A Method for Building Self-Folding Machines," Science, 345(6197), pp. 644-646.
2. Filipov, E. T., Tachi, T., Paulino, G. H., 2015, "Origami Tubes Assembled Into Stiff, Yet Reconfigurable Structures and Metamaterials," Proc. Natl. Acad. Sci., 112(40), pp. 12321-12326.
3. Lang, R. J., 1996, "A Computational Algorithm for Origami Design," 12th Annual Symposium on Computational Geometry (SOCG '96), Philadelphia, PA, May 24-26, pp. 98-105.
4. Seffen, K. A., Stott, S. V., 2014, "Surface Texturing Through Cylinder Buckling," ASME J. Appl. Mech., 81(6), p. 061001.
5. Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., McEuen, P. L., 2015, "Graphene Kirigami," Nature, 524(7564), pp. 204-207.
6. Sussman, D. M., Cho, Y., Castle, T., Gong, X., Jung, E., Yang, S., Kamien, R. D., 2015, "Algorithmic Lattice Kirigami: A Route to Pluripotent Materials," Proc. Natl. Acad. Sci., 112(24), pp. 7449-7453.
7. Safsten, C., Fillmore, T., Logan, A., Halverson, D., Howell, L., 2016, "Analyzing the Stability Properties of Kaleidocycles," ASME J. Appl. Mech., 83(5), p. 051001.
8. Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., Cohen, I., 2015, "Origami Structures With a Critical Transition to Bistability Arising From Hidden Degrees of Freedom," Nat. Mater., 14(4), pp. 389-393.
9. Hawkes, E., An, B., Benbernou, N. M., Tanaka, H., Kim, S., Demaine, E. D., Rus, D., Wood, R. J., 2010, "Programmable Matter by Folding," Proc. Natl. Acad. Sci., 107(28), pp. 12441-12445.
10. Lamoureux, A., Lee, K., Shlian, M., Forrest, S. R., Shtein, M., 2015, "Dynamic Kirigami Structures for Integrated Solar Tracking," Nat. Commun., 6, p. 8092.
11. Hanna, B. H., Magleby, S. P., Lang, R. J., Howell, L. L., 2015, "Force-Deflection Modeling for Generalized Origami Waterbomb-Base Mechanisms," ASME J. Appl. Mech., 82(8), p. 081001.
12. Overvelde, J. T. B., Weaver, J. C., Hoberman, C., Bertoldi, K., 2017, "Rational Design of Reconfigurable Prismatic Architected Materials," Nature, 541(7637), pp. 347-352.
13. Yan, Z., Zhang, F., Wang, J., Liu, F., Guo, X., Nan, K., Lin, Q., Gao, M., Xiao, D., Shi, Y., Qiu, Y., Luan, H., Kim, J. H., Wang, Y., Luo, H., Han, M., Huang, Y., Zhang, Y., Rogers, J. A., 2016, "Controlled Mechanical Buckling for Origami-Inspired Construction of 3D Microstructures in Advanced Materials," Adv. Funct. Mater., 26(16), pp. 2629-2639.
14. Yasuda, H., Yang, J., 2015, "Reentrant Origami-Based Metamaterials With Negative Poisson's Ratio and Bistability," Phys. Rev. Lett., 114(18), p. 185502.
15. Overvelde, J. T. B., de Jong, T. A., Shevchenko, Y., Becerra, S. A., Whitesides, G. M., Weaver, J. C., Hoberman, C., Bertoldi, K., 2016, "A Three-Dimensional Actuated Origami-Inspired Transformable Metamaterial With Multiple Degrees of Freedom," Nat. Commun., 7, p. 10929.
16. Tang, R., Huang, H., Tu, H., Liang, H., Liang, M., Song, Z., Xu, Y., Jiang, H., Yu, H., 2014, "Origami-Enabled Deformable Silicon Solar Cells," Appl. Phys. Lett., 104(8), p. 083501.
17. Song, Z., Ma, T., Tang, R., Cheng, Q., Wang, X., Krishnaraju, D., Panat, R., Chan, C. K., Yu, H., Jiang, H., 2014, "Origami Lithium-Ion Batteries," Nat. Commun., 5, p. 3140.
18. Bassik, N., Stern, G. M., Gracias, D. H., 2009, "Microassembly Based on Hands Free Origami With Bidirectional Curvature," Appl. Phys. Lett., 95(9), p. 091901.
19. Xu, S., Yan, Z., Jang, K.-I., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M., McCracken, J., Wang, R., Badea, A., Liu, Y., Xiao, D., Zhou, G., Lee, J., Chung, H. U., Cheng, H., Ren, W., Banks, A., Li, X., Paik, U., Nuzzo, R. G., Huang, Y., Zhang, Y., Rogers, J. A., 2015, "Assembly of Micro/Nanomaterials Into Complex, Three-Dimensional Architectures by Compressive Buckling," Science, 347(6218), pp. 154-159.
20. Laflin, K. E., Morris, C. J., Muqeem, T., Gracias, D. H., 2012, "Laser Triggered Sequential Folding of Microstructures," Appl. Phys. Lett., 101(13), p. 131901.
21. Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., Ren, W., Si, H., Liu, F., Yang, L., Li, H., Wang, J., Guo, X., Luo, H., Wang, L., Huang, Y., Rogers, J. A., 2015, "A Mechanically Driven Form of Kirigami as a Route to 3D Mesostructures in Micro/Nanomembranes," Proc. Natl. Acad. Sci., 112(38), pp. 11757-11764.
22. Ma, J., You, Z., 2014, "Energy Absorption of Thin-Walled Square Tubes With a Prefolded Origami Pattern-Part I: Geometry and Numerical Simulation," ASME J. Appl. Mech., 81(1), p. 011003.
23. Chen, B. G., Liu, B., Evans, A. A., Paulose, J., Cohen, I., Vitelli, V., Santangelo, C. D., 2016, "Topological Mechanics of Origami and Kirigami," Phys. Rev. Lett., 116(13), p. 135501.
24. Chen, Y., Peng, R., You, Z., 2015, "Origami of Thick Panels," Science, 349(6246), pp. 396-400.
25. Sareh, S., Rossiter, J., 2013, "Kirigami Artificial Muscles With Complex Biologically Inspired Morphologies," Smart Mater. Struct., 22(1), p. 014004.
26. Hanna, B. H., Lund, J. M., Lang, R. J., Magleby, S. P., Howell, L. L., 2014, "Waterbomb Base: A Symmetric Single-Vertex Bistable Origami Mechanism," Smart Mater. Struct., 23(9), p. 094009.
27. Schenk, M., Guest, S. D., 2013, "Geometry of Miura-Folded Metamaterials," Proc. Natl. Acad. Sci., 110(9), pp. 3276-3281.
28. Wei, Z. Y., Guo, Z. V., Dudte, L., Liang, H. Y., Mahadevan, L., 2013, "Geometric Mechanics of Periodic Pleated Origami," Phys. Rev. Lett., 110(21), p. 215501.
29. Florijn, B., Coulais, C., van Hecke, M., 2014, "Programmable Mechanical Metamaterials," Phys. Rev. Lett., 113(17), p. 175503.
30. Eidini, M., Paulino, G. H., 2015, "Unraveling Metamaterial Properties in Zigzag-Base Folded Sheets," Sci. Adv., 1(8), p. e1500224.
31. Brunck, V., Lechenault, F., Reid, A., Adda-Bedia, M., 2016, "Elastic Theory of Origami-Based Metamaterials," Phys. Rev. E, 93(3), p. 033005.
32. Zhou, X., Wang, H., You, Z., 2015, "Design of Three-Dimensional Origami Structures Based on a Vertex Approach," Proc. R. Soc. Math. Phys. Eng. Sci., 471(2181), p. 20150407.
33. Dudte, L. H., Vouga, E., Tachi, T., Mahadevan, L., 2016, "Programming Curvature Using Origami Tessellations," Nat. Mater., 15(5), pp. 583-588.
34. Tachi, T., 2013, "Designing Freeform Origami Tessellations by Generalizing Resch's Patterns," ASME J. Mech. Des., 135(11), p. 111006.
35. Tachi, T., 2010, "Freeform Variations of Origami," J. Geom. Graph., 14(2), pp. 203-215.
36. Castle, T., Sussman, D. M., Tanis, M., Kamien, R. D., 2016, "Additive Lattice Kirigami," Sci. Adv., 2(9), p. e1601258.
37. Nojima, T., Saito, K., 2006, "Development of Newly Designed Ultralight Core Structures," Int. J. Ser. Solid Mech. Mater. Eng., 49(1), pp. 38-42.
38. Shyu, T. C., Damasceno, P. F., Dodd, P. M., Lamoureux, A., Xu, L., Shlian, M., Shtein, M., Glotzer, S. C., Kotov, N. A., 2015, "A Kirigami Approach to Engineering Elasticity in Nanocomposites Through Patterned Defects," Nat. Mater., 14(8), pp. 785-789.
39. Qi, Z., Campbell, D. K., Park, H. S., 2014, "Atomistic Simulations of Tension-Induced Large Deformation and Stretchability in Graphene Kirigami," Phys. Rev. B, 90(24), p. 245437.
40. Castle, T., Cho, Y., Gong, X., Jung, E., Sussman, D. M., Yang, S., Kamien, R. D., 2014, "Making the Cut: Lattice Kirigami Rules," Phys. Rev. Lett., 113(24), p. 245502.
41. Cho, Y., Shin, J.-H., Costa, A., Kim, T. A., Kunin, V., Li, J., Lee, S. Y., Yang, S., Han, H. N., Choi, I.-S., Srolovitz, D. J., 2014, "Engineering the Shape and Structure of Materials by Fractal Cut," Proc. Natl. Acad. Sci., 111(49), pp. 17390-17395.
42. Xie, R., Chen, Y., Gattas, J. M., 2015, "Parametrisation and Application of Cube and Eggbox-Type Folded Geometries," Int. J. Space Struct., 30(2), pp. 99-110.
43. Lv, C., Krishnaraju, D., Konjevod, G., Yu, H., Jiang, H., 2014, "Origami Based Mechanical Metamaterials," Sci. Rep., 4, p. 5979.
44. Schenk, M., Guest, S. D., 2011, "Origami Folding: A Structural Engineering Approach," Origami 5: Fifth International Meeting of Origami Science, Mathematics, Education, CRC Press, Boca Raton, FL, pp. 291-303.
45. Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., Cohen, I., 2014, "Using Origami Design Principles to Fold Reprogrammable Mechanical Metamaterials," Science, 345(6197), pp. 647-650.
46. Kim, J., Hanna, J. A., Byun, M., Santangelo, C. D., Hayward, R. C., 2012, "Designing Responsive Buckled Surfaces by Halftone Gel Lithography," Science, 335(6073), pp. 1201-1205.
47. Guo, X., Li, H., Ahn, B. Y., Duoss, E. B., Hsia, K. J., Lewis, J. A., Nuzzo, R. G., 2009, "Two-and Three-Dimensional Folding of Thin Film Single-Crystalline Silicon for Photovoltaic Power Applications," Proc. Natl. Acad. Sci., 106(48), pp. 20149-20154.
48. Wang, F., Gong, H., Chen, X., Chen, C. Q., 2016, "Folding to Curved Surfaces: A Generalized Design Method and Mechanics of Origami-Based Cylindrical Structures," Sci. Rep., 6(1), p. 33312.
49. Gattas, J. M., Wu, W., You, Z., 2013, "Miura-Base Rigid Origami: Parameterizations of First-Level Derivative and Piecewise Geometries," ASME J. Mech. Des., 135(11), p. 111011.