The combined finite-discrete element method

The Combined Finite-Discrete Element Method

Volumn , Issue , 2004, Pages 1-333

  Munjiza, Ante ^a  

^a QUEEN MARY UNIVERSITY OF LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

APPLICATION PROGRAMS; DEFORMATION; EXPLOSIVES; FRACTURE MECHANICS; MINING ENGINEERING; PILES; ROCKS;

COMPUTATIONAL MODEL; COMPUTATIONAL TOOLS; DEFORMABLE BODIES; DYNAMIC BEHAVIOURS; INPUT AND OUTPUTS; INTACT ROCK MASS; NATURAL EXTENSION; POWDER TECHNOLOGY;

BLASTING;

EID: 85016927068     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/0470020180     Document Type: Book

References (300)

1. Acharya, A. (1992) Discrete element method for the simulation of ball mills. Master's thesis, University of Utah.
2. Adams, M.J. and Edmondson, B. (1987) Forces between particles in continuous and discrete liquid media. In Tribology in Particulate Technology, edited by B.J. Briscoe and M.J. Adams, Adam Hilger.
3. Adams, M.J. and Perchard, V. (1985) The cohesive force between particles with interstitial liquid. I. Chem. E. Symp. Series. 91 147-160.
4. Aggson, J.R. (1979) Stress Induced Failures in Mine Roof, Bureau of Mines RI 8338.
5. Aggson, J.R. (1978) Coal Mine Floor Heave in the Beckley Coalbed. An Analysis,' Report of Investigations 8274, Denver Mining Research Center, Bureau of Mines, Denver, Colorado, USA.
6. Ahola, M. (1989) Application of the Discrete Element Method toward Roof Stability Problems in Underground Coal Mines, In Proc. of 1st Conf. DEM, Golden, CO, USA.
7. Aidanpää, J.O., Shen, H.H. and Gupta, R.B. (1996) Experimental and numerical studies of shear layers in granular shear cell. ASCE Journal of Engineering Mechanics, 122(3), 187-196.
8. Aizawa, T., Iwai, T. and Kihara, J. (1992) Granular Modeling of Steel Powder Flow and Compaction in Injection Molding. In Proc. of Powder Injection Molding Symposium (American Powder Metallurgy Institute, California), 419-433.
9. Alshibli, K. and Sture, S. (2000) Shear band formation in plane strain experiments of sand. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 126(6), 495-503.
10. Anandarajah, A. (1994) Discrete Element Method for Simulating Behavior of Cohesive Soil, J. Geotech. Eng., ASCE, 120(9), 1593-1613.
11. Anandarajah, A. (2000) Numerical simulation of one dimensional behaviour of kaolinite, Geotechnique 50(5), 509-521.
12. Anandarajah, A. and Chen, J. (1997) Van der Waals Attractive Force Between Clay Particles in Water and Contaminant. Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, 37(2), 27-37.
13. Anderson, T. and Jackson, R. (1967) A fluid mechanical description of fluidized beds, Ind. Eng. Chem. Fundam. 6(4), 527-539.
14. Antonellini, M.A. and Pollard, D.D. (1995) Distinct element modeling of deformation bands in sandstone. J. Struct. Geol. 17, 1165-1182.
15. Babic, M., Shen, H.H. and Shen, H.T. (1990) The stress tensor in granular shear flows of uniform, deformable disks at high solids concentrations. J. Fluid Mech. 219, 81-118.
16. Babuska, I. and Melenk, J.M. (1997) The partition of unity method. Int. J. Numer. Meth. Engng, 40, 727-758.
17. Baerns, M. (1966) Effect of interparticle adhesive forces on fluidization of fine particles. Industrial & Engineering Chemistry Fundamentals, 5, 508-516.
18. Bakhtar, K., Jones, A.H. and Reed, M.A. (1987) Physical Modeling of Complex Underground Structures, 28th US Symposium on Rock Mechanics, 771-779.
19. Ban, A.H. (1981) Superquadrics and Angle-Preserving Transformations. IEEE Computer Graphics and Applications, 1, 1-20.
20. Bangash, T., Munjiza, A. and John, N. (2001) Modelling of Reinforced Concrete Beam Failure using Combined Finite/Discrete Element Method. Fracture Damage Mechanics Conference 2001, Milan.
21. Barbosa, R. and Ghaboussi, J. (1988) Discrete Element Model for Granular Soils. In Proceedings of Workshop on Fill Retention Structures, Ottawa, Canada.
22. Bardet, J.P. and Proubet, J. (1991) Adaptive dynamic relaxation for statics of granular materials. Computers and Structures, 39(3/4), 221-229.
23. Bardet, J.P. and Vardoulakis, I. (2001) The Asymmetry of Stress in Granular Media. Int. J. Solids and Structures, 38, 353-367.
24. Bardet, J.E. and Proubet, J. (1991) A numerical investigation of the structure of persistent shear bands in granular media. Geotechnique, 41, 599-613.
25. Bardet, J.P. and Scott, R.F. (1985) Seismic Stability of Fractured Rock Masses with the Distinct Element Method. 26th US Symposium on Rock Mechanics, 139-149.
26. Barr, A. (1981) Superquadrics and Angle-Preserving Transformations. IEEE Computer Graphics and Applications, 1, 1-20.
27. Barr, A. (1984) Global and local deformations of solid primitives. Computer Graphics, 18(3), 21-30.
28. Bathe, K.J. (1996) Finite Element Procedures. Prentice-Hall, Englewood Cliffs, New Jersey.
29. Bathurst, R.J. and Rothenburg, L. (1989) Investigation of Micromechanical Features of Idealized Granular Assemblies using DEM. In Proceedings of 1st U.S. Conference on Discrete Element Methods, Golden, CO.
30. Bathurst, R.J. and Rothenburg, L. (1988) Micromechanical aspects of isotropic granular assemblies with linear contact interactions, J. Appl. Mech. 55(1), 17-23.
31. Bathurst, R.J. and Rothenburg, L. (1988b) Note on a Random Isotropic Granular Material with Negative Poisson's Ratio, Int. J. Eng. Sci. 26(4), 373.
32. Bathurst, R.J. and Rothenburg, L. (1990). Observations on stress-force-fabric relations in idealized granular materials. Mechanics of Materials, 9, 65-80.
33. Bauer, A. and Fratzos, D. (1987) Finite element modelling of presplit blasting using measured pressure time curves. Soc. of Explosive Engineers Annual Meeting, Miami, FL.
34. Bazant, Z.P. and Pijaudier-Cabot, G. (1988) Non-local continuum damage, localization instability and convergence. J. Appl. Mech. 55, 287-293.
35. Belytschko T., Krongauz Y., Organ D., Fleming M. and Krysl P. (1996) Meshless methods: an overview and recent developments. Comput. Methods Appl. Mech. Eng. 139, 3-47.
36. Belytschko, T. and Hughes, T.J.R. (eds) (1983) Computational Methods For Transient Analysis, Vol. I, Computational Methods in Mechanics, Elsevier Science.
37. Belytschko, T.B., Yen, H.J. and Mullen, R. (1979) Mixed Method for Time Integration, Computer Methods in Applied Mechanics and Engineering, North-Holland, 259-275.
38. Bentley, J.L. (1975) Multidimensional binary search trees used for associative searching. Commun. ACM, 18, 1.
39. Benziey, S.E. and Krieg, R.D. (1982) A Continuum Finite Element Approach for Rock Failure and Rubble Formation. Int. J. Numer. Anal. Methods Geomech. 6, 277-286.
40. Berryman, J.G. (1983) Random Close Packing of Hard Spheres and Disks. Phys. Rev. A, 27, 1053-1061.
41. Beus, M.J., Iverson, S. and Stewart, B. (1997) Application of physical modelling and particle flow analysis to evaluate ore pass design. Trans. Inst. Min. Metal. (Sect. A: Mining Industry), 106, 110-117.
42. Bicanic, N., William, K.J. and Pramono, E. (1985) Numerical Prediction of Concrete Fracture Localization, Proceedings NUMETA '85, Swansea, Balkema.
43. Bieniawski, Z.T. (1984) Rock Mechanics Design in Mining and Tunneling. Balkema, Rotterdam.
44. Bolton, M.D. (1986). The strength and dilatancy of sands. Geotechnique, 36(1), 65-78.
45. Bonet, J. and Peraire, J. (1991) An alternating digital tree (ADT) algorithm for 3D geometric searching and intersection problems. Int. J. Num. Meth. Eng. 31, 1-17.
46. Boutt, D.F. and McPherson, B.J. (2001) Discrete Element Models of the Micromechanics of Sedimentary Rock: The Role of Organization vs. Friction. EOS Trans. AGU, 81(47), Abstract T32E-0913.
47. Brach, R.M. (1989) Rigid body collisions. J. Appl. Mech. 56, 133-138.
48. Bray, J.W. (1987) Boundary Element and Linked Methods for Underground Excavation Design. In Analytical and Computational Methods in Engineering Rock Mechanics, ed. E.T. Brown, 164-202.
49. Brenner, H. (1980) A general theory of Taylor dispersion phenomena. PhysicoChem. Hydrodyn. 1, 91-123.
50. Brenner, H. (1980) Dispersion resulting from flow through spatially periodic porous media. Phil. Trans. Roy. Soc. Lond. A297. 81, 133.
51. Briscoe, B.J. and Rough, S.L. (1998) The effects of wall friction in powder compaction. Colloids and Surfaces A, 137, 103-116.
52. Brown, R.L. and Richards, J.C. (1970) Principles of Powder Mechanics, Pergamon Press.
53. Buckingham, E. (1914) On physically similar systems; illustrations of the use of dimensional equations. The Physical Review, Vol. IV, Series II, 345-376.
54. Burchell, S.L. (1992) Analysis of High Speed Films at the B&LS Coal Mine. Internal Communication, ICI Explosives, USA.
55. Burington, R.S. (1965) Handbook of Mathematical Tables and Formulas. McGraw-Hill, 4th edition.
56. Butkovich, T.R., Walton, O.R. and Heuze, F.E. (1988) Insights in cratering phenomenology provided by discrete element modelling. In Key Questions in Rock Mechanics, Cundall, P.A. et al. (Eds.), Balkema, Rotterdam, 359-368.
57. Campbell, C.S., Cleary, P.W. and Hopkins, M.A. (1995) Large scale landslide simulations: Global deformation, velocities and basal friction. J. Geophys. Res. 100, B5, 8267-8283.
58. Campbell, C.S. and Brennen, C.E. (1985) Computer simulation of granular shear flows. J. Fluid Mech. 151, 167-188.
59. Campbell, C.S. and Brennen, C.E. (1983) Computer simulation of shear flows of granular material. In Mechanics of Granular Materials: New Models and Constitutive Relations, Jenkins, J.T. and Satake, M., eds., Elsevier, Amsterdam, 313-326.
60. Campbell, C.S. (1988) Boundary interactions for two-dimensional granular flows: asymmetric stress and couple stress. In Micromechanics of Granular Materials, Satake, M. and J.T. Jenkins (Eds.), Elsevier Science, Amsterdam, 163-173.
61. Chang, C.S. (1987) Micromechanical modelling of constitutive relations for granular material. In Micromechanics of Granular Materials, Satake, M. and J.T. Jenkins (Eds.), Elsevier, Amsterdam, 271-278.
62. Chang, C.S. and Misra, A. (1990) Application of uniform strain theory to heterogeneous granular solids. J. Eng. Mech. ASCE, 116 (10).
63. Chang, C.S. and Misra, A. (1989) Computer simulation and modelling of mechanical properties of particulates, Computers and Geotech. 7(4), 269-287.
64. Chang, C.S., Misra, A. and Xue, J. (1989) Incremental stress-strain relationships for regular packings made of multi-sized particles. Int. J. Solid and Structures, 25(6), 665-681.
65. Chappel, B.A. (1972) The Mechanics of Blocky Material, PHD thesis, Australian National University.
66. Chen, S. and Doolen, G. (1998) Lattice Boltzmann method for fluid-flows. Ann. Rev. Fluid Mech. 30, 329-364.
67. Cheng, Y.M. (1998) Advancement and improvements in discontinuous deformation analysis, Computational Geotechnics 22(2), 153-163.
68. Chung, S.H. and Katsabanis, P. (2001) An integrated approach for estimation of fragmentation. Proceedings of the 27th Annual Conference on Explosives and Blasting Technique, 1, 247-256, Orlando, FL.
69. Cleary, P.W. (1998) Discrete element modelling of industrial granular flow applications, TASK. Quarterly - Scientific Bulletin, 2, 385-416.
70. Cleary, P.W. (2000) DEM simulation of industrial particle flows: Case studies of dragline excavators, mixing in tumblers and centrifugal mills. Powder Technology, 109, 83-104.
71. Cleary, P.W. and Campbell, C.S. (1993) Self-lubrication for long run-out landslides: Examination by computer simulation. J. Geophys. Res. 98, No B12, 21911-21924.
72. Cleary, P.W. and Sawley, M.L. (1999) Three-dimensional modelling of industrial granular flows. Second International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, 95-100.
73. Cleary, P.W., Laurent, B.F.C. and Bridgwater, J. (2002) DEM prediction of flow patterns and mixing rates in a ploughshare mixer. Proc. World Congress Particle Technology 4.
74. Cleary, P.W. (1998) How well do discrete element granular flow models capture the essentials of mixing processes? Appl. Math. Modelling, 22, 995-1008.
75. Cleary, P.W. and Hoyer, D. (2000) Centrifugal mill charge motion and power draw: comparison of DEM predictions with experiment. Int. J. Miner. Process. 59(2), 131-148.
76. Cleary, P.W., Stokes, N. and Hurley J. (1997) Efficient collision detection for three dimensional superellipsoid particles. Proc. 8th International Computational Techniques and Applications Conference, World Scientific, Adelaide.
77. Cohen, J., Lin, M., Manocha, D. and Ponamgi, K. (1995) I-COLLIDE: An Interactive and Exact Collision Detection System for Large-Scaled Environments. Proceedings of ACM Int. 3D Graphics Conference, 189-196.
78. Cook, B., Noble, D., Preece, D. and Williams, J. (2000) Direct simulation of particle-laden fluids. In, Pacific Rocks 2000, Girard, Liebman, Breeds and Doe (Eds.), Balkema, Rotterdam, 279-286.
79. Cook, R.D., Malkus, D.S., Plesha, M.E. andWitt, R.J. (2001) Concepts and Applications of Finite Element Analysis. 4th ed., John Wiley & Sons, Chichester.
80. Cundall, P.A. (1971) A computer model for simulating progressive large scale movements in blocky rock systems. Proc. Symp. Rock Fracture (ISRM), Nancy, Vol. I, paper 11-8.
81. Cundall, P.A. and Strack, O.D.L. (1983) Modeling of microscopic mechanism in granular material. In Mechanics of Granular Materials; New Models and Constitutive Relations, J.T. Jenkins and M. Satake (Eds.), Elsevier, Amsterdam.
82. Cundall, P.A. (1987) Distinct element models of rock and soil structure. In Analytical and Computational Methods in Engineering Rock Mechanics, E.T. Brown (Ed.), Allen and Unwin, London.
83. Cundall, P.A. (1988) Formulation of three-dimensional distinct element model-Part 1. A scheme to detect and represent contacts in system composed of many polyhedral blocks, Int. J. Rock Mech. Min. Sci. 8 Geomech. Abstr. 25(3), 107-116.
84. Cundall, P.A. and Roger, D.H. (1989) Numerical modeling of discontinua. Proc. of 1st U.S. Conference on Discrete Element Methods, Golden, CO.
85. Cundall, P.A. (1976) Explicit finite-difference method in geomechanics. Numerical Methods in Geomechanics, ASCE, P13 2-150.
86. D'Addetta, G.A., Kun, F., Hemnaim, H.J. and Ramm, E. (2002) On the application of a discrete model to the fracture process of cohesive granular materials. Granular Matter. 4(2).
87. De Borst, R. (2001) Some recent issues in computational failure mechanics, Int. J. Numer. Meth. Engng. 52(1/2), 63-96.
88. Dialer, C. (1992) A distinct element approach for the defromation behavior of shear stressed masonry panels. Proceedings of the 6th Canadian Masonry Symposium, Saskatoon, 765-776.
89. Drake, T.G. (1990) Structural features in granular flows, J. Geophys. Res. 95(B6), 8681-8695.
90. Eringen, A.C. (1968) Theory of micropolar elasticity. In Fracture - An Advanced Treatise, Chapter 7, Liebovitz (Ed.), Vol. II, Academic Press, New York, 621-693.
91. Feng, Y.Q. and Yu, A.B. (2002) Effect of bed thickness on fluidization behaviour of particles mixtures. 4th World Congress on Particle Technology, Sydney, Australia (to appear).
92. Feng, Y.Q., Xu, B.H., Zhang, S.J., Yu, A.B. and Zulli, P. (2001) Size segregation of particle mixtures in a gas-fluidized bed. 7th Int. Conf. on Bulk Materials Storage, Handling and Transportation, Newcastle, Australia, 377-385.
93. Feng, Y.T. and Owen, D.R.J. (2002) An augumented spatial digital tree algorithm for contact detection in computational mechanics. Int. J. Num. Meth. Eng. (in press).
94. Feng, Y.T. and Owen, D.R.J. (2002b) An energy based comer to corner contact algorithm. 3rd Int. Conf. Discrete Element Methods, Santa Fe, NM, 23-25.
95. Feng, Y.T., Han, K. and Owen, D.R.J. (2002) Filling domains with disks: an advancing front approach. Int. J. Numer. Meth. Eng. (in press).
96. Ghaboussi, J. (1992) Some theoretical and computational aspects of large scale discrete element. Rock mechanics. In Proceedings of the 33rd U.S. symposium, Tillerson, J.R. and Wawersik, W.R. (Eds.), Balkema, 33, 619-628.
97. Ghaboussi, J. and Barbosa, R. (1990) Three-dimensional discrete element method for granular materials. Int. J. Numer. Anal. Meth. Geomech. 14, 451-472.
98. Goodman, R.E. and Shi, G.H. (1985) Block Theory and its Application to Rock Engineering. Prentice-Hall, New Jersey.
99. Goodman, R.E., Taylor, R. and Brekke, T.L. (1968) A model for the mechanics of jointed rock. J. Soil Mech. Found. Div. ASCE, 94, 637-660.
100. Gregory, C.E. (1973) Explosives for North American Engineers. Trans Tech Publications, Cleveland, OH.
101. Hakuno, M. and Hirao, T. (1973) A trial related to random packing of particle assemblies. Proc. JSCE., 219, 55-63 (in Japanese).
102. Hazzard, J.F., Young, P.F. and Maxwell, S.C. (2000) Micromechanical modeling of cracking and failure in brittle rocks, J. Geophys. Res. 105(B7), 16683-16697.
103. Herrmann, H.J. (1991) Patterns and scaling in fracture. In Fracture Processes in Concrete, Rock and Ceramics, Chapman & Hall, New York.
104. Hocking, G. (1993) Collision impact of a ship with multi-year sea ice. 2nd Int. Conf. on Discrete Element Methods, MIT, Cambridge, MA.
105. Hocking, G., Mustoe, G.G.W. and Williams, J.R. (1988) Dynamic analysis for generalized three dimensional contact and fracturing of multiple bodies, INTERA Technologies, Inc.
106. Hocking, G., Mustoe, G.G.W. and Williams, J.R. (1987) Two and three dimensional contact and fracturing of multiple bodies. NUMETA '87 Numerical Methods in Engineering, Theory and Application, A.A. Balkema, Rotterdam.
107. Hocking, G., Mustoe, G.G.W. and Williams, J.R. (1985) Validation of the CICE discrete element code for ice ride-up and ice ridge cone interaction. ASCE Speciality Conference, ARCTIC '85, San Francisco.
108. Hocking, G. (1989) The discrete element method for analysis of fragmentation and discontinua. Proc. 1st Conf. DEM, Golden, CO.
109. Hocking, G. (1992) The discrete element method for analysis of fragmentation of discontinua. Eng. Computations, 2, 145-155.
110. Hocking, G., Williams, J.R. and Mustoe, G.G.W. (1985) Validation of the CICE discrete element code for ice ride-up and ice ridge/cone interaction. ARCTIC '85, ASCE, San Francisco.
111. Hocking, G., Williams, J.R. and Mustoe, G.G.W. (1985) CICE Model Validation Project. AOGA Project No. 231.
112. Hocking, G. (1977) Development and Application of the Boundary Integral and Rigid Block Methods for Geotechnics, PHD thesis, Imperial College.
113. Hocking, G., Mustoe, G.G.W. and Williams, J.R. (1985) CICE discrete element analysis code-theoretical manual. Applied Mechanics Inc., Lakewood, CO.
114. Hocking, L.M. (1964) The behavior of clusters of spheres falling in a viscous fluid. Part2 Slow motion theory. J. Fluid Mech. 20, 129-139.
115. Hopkins, M.A. and Louge, M.Y. (1991) Inelastic microstructure in rapid granular flows of smooth disks. Phys. Fluids A, 3(1), 47-57.
116. Hopkins, M.A., Daly, S.F. and Lever, J.H. (1996) Three-dimensional simulation of river ice jams. Proceedings of the 8th International Specialty Conference on Cold Regions Engineering, Fairbanks, AK, 12-17.
117. Hughes, T.J.R. (1983) Analysis of transient algorithms with particular reference to stability behavior. In Computational Methods for Transient Analysis, Vol. 1.
118. Iwashita, K. and Hakuno, M. (1988) Granular assembly simulation for dynamic cliff collapse due to earthquake. Proc. 9th World Conf. on Earthquake Eng., 3, 175-180, Tokyo-Kyoto.
119. Jacota, A. and Dawson, P.R. (1988) Micromechanical modeling of powder compacts - I. Unit problems for sintering and traction induced deformation, Acta Metall. 36(9), 2551-2561.
120. Jayaweera, K.O.L.F., Mason, B.J. and Slack, G.W. (1964) The behavior of clusters of spheres falling in a viscous fluid. Part 1 Experiment. J. Fluid Mech. 20, 121-128.
121. Jenkins, J.T. and Savage, S.B. (1983) A theory for the rapid flow of identical, smooth, nearly elastic, spherical particles. J. Fluid Mech. 130, 187-202.
122. Jensen, R.P., Bosscher, P.J., Plesha, M.E. and Edil, T.B. (1999) DEM simulation of granular media - Structure interface: effects of surface roughness and particle shape. Int. J. Num. Anal. Meth. Geomech., 23, 531-547.
123. Johansson, C.H. and Persson, P.A. (1970) Detonics of High Explosives. Academic Press, London.
124. Jorgenson, G.K. and Chung, S.H. (1987) Blast simulation - surface and underground with SABREX model. CIM Bulletin, 37-41.
125. Kawaguchi, T., Tanaka, T. and Tsuji, Y. (1998) Numerical simulation of two-dimensional fluidised beds using discrete element method (comparison between two- and three-dimensional models). Powder Technol. 96, 129-138.
126. Kelley, C.T. (1995) Iterative Methods for Linear and Nonlinear Equations. SIAM, Philadelphia.
127. Kernighan, B.W. and Ritchie, D.M. (1988) The C Programming Language. Prentice Hall, New Jersey, 2nd edition.
128. Kishino, Y. (1987) Disc model analysis of granular media. In Micromechanics of Granular Materials, Satake, M. and Jenkins, J.T. (Eds.), Elsevier, Amsterdam, 143-152.
129. Kitamura, R. (1981) Analysis of deformation mechanism of particulate material at particle scale. Soils and Foundations, 21(2), 85-97.
130. Komodromos, P. (2002) On the simulation of deformable bodies using combined discrete and finite element methods. 3rd International Conference on Discrete Element Methods, Santa Fe, NM.
131. Kreyszig, E. (1983) Advanced Engineering Mathematics. John Wiley & Sons, Chichester. 5th edition.
132. Lewis, R.W. and Schrefler, B.A. (1998) The Finite Element Method in the Static and Dynamics Deformation and Consolidation of Porous Media. John Wiley & Sons, Chichester, 2nd Ed.
133. Lian, J. and Shima, S. (1994) Powder assembly simulation by particle dynamics method. Int. J. Num. Meth. Eng. 37, 763-775.
134. Lifshitz, E.M. (1956) The theory of molecular attractive forces between solids. Soviet Physics, 2(1), 73-83.
135. Lin, J.S. (1995) Continuous and discontinuous analysis using the manifold method,' Proceeding Working Forum on the Manifold Analysis. Vol. 1, 1-20, Geotechnical Lab, US Army Engineers Waterways Experiment Station.
136. Livesley, R.K. (1978) Limit analysis of structures formed from rigid blocks. Int. J. Num. Meth. in Eng. 12, 1853-1871.
137. Lloyd, S. (2000) Ultimate physical limits to computation. Nature, 406, 1047-1054.
138. Londe, P. (1987) The Malpasset Dam Failure. Engineering Geology, 24, 295-529.
139. Lorenz, A., Tuozzolo, C. and Louge, M.Y. (1995) Measurements of impact properties of small, nearly spherical particles. Experimental Mechanics, 37(3), 292-298.
140. Mandel, J. (1963) Tests on reduced scale models in soil and rock mechanics - a study of the conditions of similitude. Int. J. Rock Mech. Mining Sci. 1, 31-42.
141. Margolin, L.G. (1984) Generalized Griffith criteria for crack propagation. Eng. Frac. Mech. 19, 539-543.
142. Mazzone, D.N., Tardos, G.I. and Pfeffer, R. (1986) The effect of gravity on the shape and strength of a liquid bridge between two spheres. J. Colloid Interface Sci. 113, 544-556.
143. Meguro, K. and Hakuno, M. (1988) Fracture analysis of concrete structure by granular assembly simulation. Bulletin of the Earthquake Research Institute, 63(4), 409-468 (in Japanese).
144. Metcalfe, G., Shinbrot, T., McCarthy, J.J. and Ottino, J.M. (1995) Avalanche mixing of granular solids. Nature, 374, 39-41.
145. Minty, E.J. and Kearns, O.K. (1983) Rock mass workability. In Collected case studies in Engineering Geology, Hydrogeology, Environmental Geology, Knight, M.J., Minty, E.J. and Smith, R.B. (Eds.), 59-81.
146. Mishra, B.K. and Murty, C.V.R. (2001) On the determination of contact parameters for realistic simulation of tumbling mills. Powder Technology, 115, 290-297.
147. Mroz, Z. and Zubelewicz, A. (1982) On initiation of flow of granular materials from hoppers. In Deformation and Failure of Granular Materials, Vermeer, P.A. and Lucrer, H.J. (Eds.), Balkema, 569-577.
148. Muhlhaus, H.B. and Vardoulakis, I. (1987) The thickness of shear bands in granular materials. Geotechnique, 37(3), 271-283.
149. Muhlhaus, H.B. (1989) Application of Cosserat theory in numerical solutions of limit load problems. Ing.-Archiv., 59(2), 124-137.
150. Munjiza, A. (1999) Fracture, fragmentation and rock blasting models in the combined finite-discrete element method. In Fracture of Rock. Computational Mechanics Publications.
151. Munjiza, A., Latham, J.P. and John, N.W.M. (2003) 3D dynamics of discrete element systems comprising irregular discrete elements. Int. J. Num. Methods Eng. 56, 35-55.
152. Munjiza, A. and John, N.W.M. (2001) Mesh size sensitivity of the combined FEM/DEM fracture and fragmentation algorithms, Eng. Fract. Mech. 69(2), 281-295.
153. Munjiza, A. and Andrews, K.R.F. (2000) Discretised penalty function method in combined finite-discrete element analysis. Int. J. Num. Meth. Eng. 49, 1495-1520.
154. Munjiza, A. and Andrews, K.R.F. (2000) Detonation gas model for combined finite-discrete element modelling of fracture and fragmentation. Int. J. Num. Meth. Eng. 49, 1377-1396.
155. Munjiza, A., Andrews, K.R.F. and White, J.K. (1999) Combined single and smeared crack model in combined finite-discrete element method. Int. J. Num. Meth. Eng. 44, 41-57.
156. Munjiza, A., Latham, J.P. and Andrews, K.R.F. (1999) Challenges of a coupled combined finite-discrete element approach to explosive induced rock fragmentation. FRAGBLAST - Int. J. Fragmentation and Blasting, 3, 237-250.
157. Munjiza, A. and Andrews, K.R.F. (1998) NBS contact detection algorithm for bodies of similar size. Int. J. Num. Meth. Eng., 43, 131-149.
158. Munjiza, A. and Owen, D.R.J. (1998) AKm proportional damping in explicit integration of dynamic structural systems. Int. J. Num. Meth. Eng. 41, 1277-1296.
159. Munjiza, A., Owen, D.R.J. and Bicanic, N. (1995) A combined finite-discrete element method in transient dynamics of fracturing solids. Int. J. Eng. Computations, 12, 145-174.
160. Munjiza, A. and Latham, J.P. (2002) Grand challenge of discontinuous deformation analysis, plenary lecture. 5th Int. Conf. on Analysis of Discontinuous Deformation, Israel.
161. Munjiza, A. and Latham, J.P. (2002) Computational and algorithmic challenge of modelling discontinua, keynote lecture. 3rd Int. Conf. On Discrete Element Methods, Santa Fe, CA.
162. Munjiza, A. and Latham, J.P. (2002) Challenge of modelling particulate and fracturing solids, keynote lecture. 5th World Congress on Computational Mechanics, Vienna.
163. Munjiza, A. and Andrews, K.R.F. (1999) A FEM/DEM model for flow through cracked solids. 7th ACME Conference on Computational Mechanics in the UK, Durham, UK.
164. Munjiza, A. and Andrews, K.R.F. (1998) Improved fracture solutions for the combined finite-discrete element method. 6th ACME Conference on Computational Mechanics in the UK, Exeter.
165. Munjiza, A. (1996) Combined finite-discrete element models for blasting and mining operations. In Discontinuous Deformation Analysis (DDA) and Simulations of Discontinuous Media, Reza Salami, M. and Banks, D. (Eds.), Berkeley, CA, 518-525.
166. Munjiza, A., Owen, D.R.J. and Crook, A.J.L. (1995) Energy and momentum preserving contact algorithm for general 2D and 3D contact problems. Proceedings of the Third International Conference on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, 829-841.
167. Munjiza, A., Bicanic, N. and Owen, D.R.J. (1992) Object oriented programming concepts in discrete element analysis of fracturing media. Proceedings of the Third International Conference on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, 1949-1966.
168. Munjiza, A., Owen, D.R.J., Bicanic, N. and Xian, L. (1991) A concept of contact element in the discrete element method. In Proceedings NEC-91, Int. Conf. on Nonlinear Engineering Computations, Bicanic et al. (Eds.), Pineridge Press, 435-448.
169. Munjiza, A., Andrews, K.R.F. and White, J.R. (1997) Discretized contact solution for combined finitediscrete method. 5th ACME Conf., London, UK, 96-100.
170. Munjiza, A., Owen, D.R.J. and Bicanic, N. (1995) A combined finite-discrete element method in transient dynamics of fracturing solids. Int. J. Eng. Computation, 12, 145-174.
171. Mustoe, G.G.W. (2000) A numerical and experimental study of the performance and safety issues for ore pass system. (RP-5). WMRC (Western Mining Resources Center) annual progress.
172. Mustoe, G.G.W. (1989) Special elements in discrete element analysis. 1st U.S. Conference on Discrete Elements, Golden, CO.
173. Mustoe, G.G.W., Henriksen, M. and Huttelmaier, H.P. (Eds.) (1989) Proceedings of the 1st U.S. Conf. on Discrete Element Methods, Golden, CO.
174. Mustoe, G.G.W., Williams, J.R., Hocking, G. and Worgan, K. (1988) Penetration and fracturing of brittle plates under dynamic impact. INTERA Technologies, Inc.
175. Mustoe, G.G.W., Williams, J.R. and Hocking, G. (1987) The discrete element method in geotechnical engineering. In Developments in Soil Mechanics and Foundation Engineering-3, Banerjee, P.K. and Butterfield, R. (Eds.), New York; Elsevier, 233-263.
176. Mustoe, G.G.W., Williams, J.R. and Hocking, G. (1977) The discrete element method in geotechnical engineering. In Developments in Soil Mechanics and Foundation Engineering, (Ch. 7), Elsevier, Barking, U.K.
177. Nedderman, R.M. (1992) Statics and Kinematics of Granular Materials. Cambridge University Press, Cambridge.
178. Nemat-Nasser, S. (1990) Certain basic issues in finite-deformation continuum plasticity. Mechanica, 25, 223-229.
179. Obert, L. and Duvall, W.I. (1968) Rock Mechanics and the Design of Structures in Rock. John Wiley & Sons, New York.
180. Oda, M. and Konishi, J. (1974) Microscopic deformation mechanism of granular material in simple shear. Soils and Foundations, 14(4), 25-38.
181. Ogawa, H. and Takeuchi, M. (1969) Dispersion of dumped sand from hopper-barges. Proceedings of the JSCE, 161, 39-49.
182. Ohnishi, Y., Mimuro, T., Hakevakl, N. and Yoshida, J. (1985) Verification of Input parameters for distinct element analysis of jointed rock mass. Proc. Int. Symp. on Fundamentals of Rock Joints, Bjorkllden.
183. Ouyang, J., Yu, A.B. and Pan, R.H. (2001) Simulations of plug flow in vertical pipe by hard sphere model. 7th Int. Conf. on Bulk Materials Storage, Handling and Transportation, Newcastle Australia, 801-815.
184. Owen, D.R.J., Munjiza, A. and Bicanic, N. (1992) A finite element-discrete element approach to the simulation of rode blasting problems. Proceedings FEMSA-92, 11th Symposium on Finite Element methods in South Africa, Cape Town, 39-59.
185. Pande, G.N., Beer, G. and Williams, J.R. (1990) Numerical Methods in Rock Mechanics. John Willey & Sons, England.
186. Papradakakis, M. (1981) A method for the automatic evaluation of the dynamic relaxation parameters. Computer Methods in Applied Mechanics and Engineering, 25, 35-48.
187. Pentland, A. and Williams, J.R. (1989) Fast simulations on small computers: modal dynamics applied, to volumetric nodes. Proc. 20th Annual Modeling and Simulation Conference, Pittsburg.
188. Pentland, A.P. and Williams, J.R. (1988) Virtual construction. Construction, 3(4).
189. Pentland, A.P. and Williams, J.R. (1989) Good vibrations: modal dynamics for graphics and animation. SIGGRAPG '89, ACM Computer Graphics, 23(3).
190. Perkins, E. and Williams, J. (2001) A fast contact detection algorithm insensitive to object size. Engineering Computations, 18(1/2), 48-61.
191. Perkins, P. and Williams, J.R. (2001) C-grid: Neighbor searching for many body simulation. ICADD-4, 427-438.
192. Preece, D.S. (1992) The influence of damping on computer simulations of rock motion. In Proceedings of the 25th Annual Oil Shale Symposium, Golden, CO.
193. Preece, D.S. and Chung, S.H. (2002) Rock blasting 3-D discrete element heave predictions for surface coal mines and rock quarries. In Proceedings of NARMS-TAC 2002, Toronto, Ontario.
194. Preece, D.S., Burchell, S.L. and Scovira, D.S. (1993) Coupled explosive gas flow and rock motion modeling with comparison to bench blast field data. In Proceedings of the Fourth International Symposium on Rock Fragmentation by Blasting, Vienna, Austria.
195. Preece, D., Jensen, R., Perkins, E. and Williams, J. (1999) Sand production modeling using superquadric discrete elements and coupling of fluid flow and particle motion. Proceedings of the 37th U.S. Rock Mechanics Symposiu, Amadei, Kranz, Scott and Smeallie (Eds.), Balkema, Amsterdam.
196. Preece, D.S. and Taylor, L.M. (1989) Complete computer simulation of crater blasting including fragmentation and rock motion. Proceedings of Research Symposium, Society of Explosive Engineers Spring Meeting.
197. Preece, D.S. and Taylor, L.M. (1990) Spherical element bulking mechanisms for modeling blasting induced rock motion. Proceedings of the Third International Symposium on Rock Fragmentation by Blasting, Brisbane, Queensland, Australia.
198. Preece, D.S. and Knudsen, S.D. (1992) Computer modeling of gas flow and gas loading of rock in a bench blasting environment. Proceedings of the 33rd U.S. Symposium on Rock Mechanics, Santa Fe, NM.
199. Preece, D.S. (1990) Rock motion simulation of confined volume blasting. Proceedings of the 31st U.S. Symposium on Rock Mechanics, Golden, CO.
200. Reddy, J.N. (1984) Energy and Variational Methods in Applied Mechanics. John Wiley & Sons, New York.
201. Richman, M.W. (1988) Homogeneous shear flow of highly inelastic disks: the full range of solid fraction. Proc. 7th Conf. of Engineering Mechanics, Blacksburg, Virginia.
202. Ristow, G.H. (1998) Flow Properties of Granular Materials in Three-dimensional Geometries. Verlag Gorich & Weiershäuser, Marburg, Germany.
203. Rothenburg, L. and Bathurst, R.J. (1991) Numerical simulation of idealized granular assemblies with plane elliptical particles. Comput. and Geotech. 11, 315-329.
204. Sakaguchi, H. and Muhlhaus, H.B. (1997) Mesh free modelling of failure and localization in brittle rock. In Deformation and Progressive Failure in Geomechanics, Asoaka, Adachi and Oka (Eds.), Pergamon, 15-21.
205. Sawamoto, Y., Tsubota, H., Kasai, Y., Koshika, N. and Morikawa, H. (1998) Analytical studies on local damage to reinforced concrete structures under impact loading by discrete element method. Nuclear Eng. Des. 179, 157-177.
206. Schamaun, J.T. (1984) Methods for predicting rubble motion during blasting. Proceedings of 25th U.S. Symposium on Rock Mechanics, Northwestern University.
207. Schubert H., Herrmann, W. and Rumpf, H. (1975) Deformation behavior of agglomerates under tensile stress. Powder Technology, 2, 121.
208. Serrano, A.A. and Rodriguez-Ordz, J.M. (1973) A contribution to the mechanics of heterogeneous granular media. Proc. Symp. on the Role of Plasticity in Soil Mechanics, Cambridge, 215-228.
209. Shahinpoor, M. and Sharpass, A. (1982) Frequency distribution of voids in monolayers of randomly packed equal spheres. Bulk Solids Handling, 2, 825-838.
210. Shi, G. and Goodman, R.E. (1989) Generalization of two-dimensional discontinuous deformation analysis for forward modelling. Int. J. Num. Analy. Meth. Geomech. 13, 359-380.
211. Shi, G. (1988) Discontinuous deformation analysis: a new method for computing stress, strain and sliding of block systems. PhD Thesis, Department Civil Engineering, University of California, Berkeley.
212. Shi, G. (1993) Block System Modeling by Discontinuous Deformation Analysis. Computational Mechanics Publications, Boston.
213. Shi, G.H. (1989) Block System Modeling by Discontinuous Deformation Analysis. Doctoral Dissertation, Department of Civil Engineering, University of California, Berkeley.
214. Shi, G.H. (1992) Modeling rock joints and blocks by manifold method. Proceedings of the 33rd U. S. Rock Mechanics Symposium, Santa Fe, New Mexico, 639-648.
215. Shi, G.H. (1991) Block System Modelling by Discontinuous Deformation Analysis. Computational Mechanics, London.
216. Shi, G.H. and Goodman, R.E. (1985) Two dimensional discontinuous deformation analysis. Int. J. Numer. Anal. Meth. Geomech. 9, 541-556.
217. Shi, G.H and Goodman, R.E. (1988) Discontinuous deformation analysis, a new method For computing stress, strain and sliding of block systems. Proc. 29th U. S. Symposium on Rock Mechanics, Minneapolis, 381-393.
218. Shi, G.H. (1989) Discontinuous deformation analysis - a new numerical model for the statics and dynamics of block structures. Proc. 1st Conf. DEM, Golden, CO.
219. Shimizu, Y. and Cundall, P.A. (2001) Three-dimensional DEM simulations of bulk handling by screw conveyors. J. Eng. Mech. ASCE, 127(9), 285-292.
220. Shodja, H.M. and Nezami, E.G. (2002) Stress-induced anisotropy in random assemblies of oval granules. 8th International Symposium on Numerical Models in Geomechanics, Rome, Italy.
221. Sims, K. (1990) Particle animation and rendering using data parallel computation. Comput. Graphics, 24(4), 405-413.
222. Skinner, A.E. (1969) A note on the influence of interparticle friction on the shearing strength of a random assembly of spherical particles. Geotechnique, 19, 150-157.
223. Southwell, R.V. (1940) Relaxation Methods in Engineering Science. Oxford University Press, London.
224. Sowizral, H., Rushforth, K. and Deering, M. (1998) The Java 3D Specification. The Java Series, Addison-Wesley, Reading, MA.
225. Stark, C.P. (1991) An invasion percolation model of drainage network evolution. Nature, 352, 423-425.
226. Stewart, R., Bridgwater, J., Zhou, Y.C. and Yu, A.B. (2001) Simulated and measured flow of granules in a bladed mixer - a detailed comparison. Chem. Eng. Sci. 56, 5457-5471.
227. Stroustrup, B. (1986) The C++ Programming Language. Addison-Wesley, Reading, MA.
228. Sun, Y. and Vinogradov, O. (1998) Numerical simulation of jamming of solid particles transported by fluid in planar channels. Comput. Modeling & Simulation in Eng. 3, 27-32.
229. Swan, G. (1983) Determination of stiffness and other joint properties from roughness measurements. Rock Mech. Rock Eng. 16, 19-38.
230. Takagi, Y., Mizutani, H. and Kawakami, S. (1984) Impact fragmentation experiments of basalts and pyrophyllites. Icarus, 59, 462-477.
231. Tarumi, Y. and Hakuno, M. (1989) A DEM simulation for sand liquefaction. Proc. 1st U.S. Conf. on Discrete Element Methods, Golden, CO.
232. Taylor L.M. and Preece D.S. (1989) Simulation of blasting induced rock motion using spherical element models. Proceedings of the 1st U.S. Conf. on Discrete Element Methods, Golden, CO.
233. Taylor, L.M. and Preece, D.S. (1992) Simuladon of blasting induced rock motion using spherical element models, Eng. Computations, 9(2).
234. Terzaghi, K. (1936) Stress distribution in dry and in saturated sand above a yielding trap-door. Proceedings First International Conference on Soil Mechanics and Foundation Engineering, Cambridge, MA, 307-311.
235. Thomas, P.A. and Bray, J.D. (1999) Capturing nonspherical shape of granular media with disk clusters, ASCE J. Geotech. Geoenvironmental Eng. 125(3), 169-178.
236. Thornton, C. and Barnes, D.J. (1982) On the mechanics of granular materials. IUTAM Conf. on Deformation and Failure of Granular Materials, Delft, 69-77.
237. Thornton, C. and Barnes, D.J. (1986) Computer simulated deformation of compact granular assemblies. Acta Mechanica, 64, 45-61.
238. Thornton, C. (1989) Applications of DEM to process engineering problems. Proceedings 1st U.S. Conference on Discrete Element Methods, Golden, CO.
239. Thornton, C. (Ed.) (2000) Numerical simulations of discrete particle systems. Powder Technology, Special Issue, 109(1-3), 1-298.
240. Thornton, C. and Randall, C.W. (1988) Applications of theoretical contact mechanics to solid particle system simulation. In Micromechanics of Granular Materials, Satake, M. and Jenkins, J.T. (Eds.), Elsevier, 133-142.
241. Thornton, C. and Yin, K.K. (1991) Impact of elastic spheres with and without adhesion. Powder Technology, 65, 153-166.
242. Thornton, C. (1991) Interparticle sliding in the presence of adhesion. J. Phys. D: Appl. Phys. 24, 1942-1946.
243. Thornton, C. and Antony, S.J. (2000) Quasi-static shear deformation of a soft particle B; system. Powder Tech., 109, 179-191.
244. Throop, G.J. and Bearman, R.J. (1965) Numerical solutions of the Percus-Yevick equation for the hardsphere potential. J. Chem. Phys. 42, 2408-2411.
245. Tillemann, H.J. and Herrmann, H.J. (1995) Simulating deformations of granular solids under shear. Physica A, 217, 261-288.
246. Ting, J.M. and Corkum, B.T. (1988) Strength behavior of granular materials using discrete numerical modeling. Proc. 6th Int. Conf. Numerical Models in Geomechanics, Innsbruck, Austria, 305-310.
247. Ting, J.M. (1992) A robust algorithm for ellipse-based discrete element modelling of granular materials. Comput. and Geotech., 13(3), 175-186.
248. Toffoli, T. and Margolus, N. (1987) Cellular Automata Machines: A New Environment for Modeling. MIT Press, USA.
249. Tsuji, Y., Kawaguchi, T. and Tanaka, T. (1993) Discrete particle simulation of two-dimensional fluidized bed. Powder Technology, 77, 79-87.
250. Tuzun, U., Houlsby, G.T., Nedderman, R.M. and Savage, S.B. (1982) The flow of granular materials II:Velocity distributions in slow flow. Chem. Eng. Sci., 37(12), 1691-1709.
251. Uchida, Y. and Hakuno, M. (1989) A DEM simulation of debris flow. Proc. 1st U.S. Conf. on Discrete Element Methods, Golden, CO.
252. Van Nierop, M.A., Glover, G., Hinde, A.L. and Moys, M.H. (2001) A discrete element method investigation of the charge motion and power draw of an experimental two-dimensional mill. Int. J. Miner. Process. 61, 77-92.
253. Walker, D.M. (1966) An approximate theory for pressures and arching in hoppers. Chem. Eng. Sci. 21, 975.
254. Walton, O.R. and Braun, R.L. (1988) Viscosity and temperature calculations for assemblies of inelastic frictional disks. J. Rheology, 30(5), 949-980.
255. Walton, O.R., Braun, R.L., Mallon, R.G. and Cervelli, D.M. (1988) Particle-dynamics calculations of gravity flows of inelastic, frictional spheres. In Micromechanics of granular material, Satake, M. and Jenkins, J.T. (Eds.), Elsevier, Amsterdam, 153-161.
256. Walton. O.R. and Braun, R.L. (1986) Viscosity, granular-temperature and stress calculations for shearing assemblies of Inelastic, frictional disks. J. Rheology, 30, 949-980.
257. Wang, C.Y., Wang, C.F. and Sheng, J.A. (1999) Packing generation scheme for the granular assemblies with 3D ellipsoidal particles. Int. J. Numer. Anal. Meth. Geomech. 23, 815-828.
258. Warburton, P.M. (1981) Vector stability analysis of an arbitrary polyhedral rock block with any number of free faces. Int. J. Rock Mech. 18, 415-427.
259. Watanabe, H. (1999) Critical rotation speed for ball-milling. Powder Technology, 104, 95-99.
260. Weaver, J.M. (1975) Geological factors significant in the assessment of rippability. The Civil Eng. in Sth. Africa, 17(12), 313-316.
261. Wei, Q., Cheng, X.H. and Liu, G.T. (1991) The elliptic discrete element method as a new approach to simulating granular media. Proc. Asian Pacific Conf. Computational Mechanics, Hong Kong.
262. Wen, C. and Yu, Y. (1966) Mechanics of fluidization. Chem. Eng. Prog. Symp. Ser., 62(62), 100.
263. William, K.J., Bicanic, N., Pramono, N. and Sture, S. (1985) Composite fracture mode for strain softening computations of concrete. Int. Conf. Fracture Mechanics of Concrete, Lausanne, Switzerland.
264. Williams, J.R. and Mustoe, G. (1987) Nodal methods for the analysis of discrete systems. Int. J. Comput. and Geotech. 4, 1-19.
265. Williams, J.R. and Pentland, A.P. (1989) Superquadrics and modal dynamics for discrete elements in concurrent design. In Proceedings of the 1st U.S. Conf. on Discrete Element Methods, Mustoe, G.G.W., Henriksen, M. and Huttelmaier, H.P. (Eds.), Golden, CO.
266. Williams, J.R. and O'Connor, R. (1995) A linear complexity intersection algorithm for discrete element simulations of arbitrary geometrics. Int. J. CAE-Eng. Computations, 12(2), 185-201.
267. Williams, J.R., O'Coimor, R. and Rege, N. (1996) Discrete element analysis and granular vortex formation. Electronic J. Geotech. Eng. Available at http://139.78.66.61/ejge/.
268. Williams, J. and Mustoe, G. (Eds.) (1993) Proceedings of the 2nd International Conference on Discrete Element Methods (DEM), IESL Publications.
269. Williams, J.R. and Mustoe, G.G.W. (1987) Modal methods for the analysis of discrete systems. Comput. and Geotech. 4, 1-19.
270. Williams, J.R. and Pentland, A. (1991) Superquadrics and modal dynamics for discrete elements in concurrent design. Technical Report Order No. lESL91-12, Intelligent Engineering Systems Laboratory, Massachusetts Institute of Technology.
271. Williams, J.R. and Pentland, A.P. (1989) Good vibrations: modal dynamics for graphics and animation. ACM Comput. Graphics, 23(3).
272. Williams, J.R. (1987) Contact analysis of large numbers of interacting bodies using discrete modal methods for simulating material failure on the microscopic scale. Technical Report Order No. lESL91-12, Intelligent Engineering Systems Laboratory, Massachusetts Institute of Technology, 1991.
273. Williams, J.R. (1988) Contact analysis of large numbers of interacting bodies using discrete modal methods for simulating material failure on the microscopic scale. Eng. Comput. 5, 198-209.
274. Williams, J.R. and Mustoe, G.G.W. (1987) Modal methods for the analysis of discrete systems. Comput. and Geotech. 4, 1-19.
275. Williams, J.R., Hocking, G. and Mustoe, G.G.W. (1985) The theoretical basis of the discrete element method. Proceedings of the International Conference on Numerical Methods in Engineering: Theory and Applications, Swansea, 897-906.
276. Williams, J.R. and Pentland, A.P. (1989) Interactive, integrated design - object representation and modal analysis. Human Computer Interface International '89, Boston, MA.
277. Wilson, E.L, Farhoomand, I. and Bathe, K.J. (1973) Nonlinear dynamic analysis of complex structures. Earthquake Eng. Struct. Dyn. 1, 241-252.
278. Wittke, W. and Leonards, G.A. (1987) Modified hypothesis for failure of Malpasset Dam. Eng. Geology, 24, 567-594.
279. Worgan, K.J and Mustoe, G.G.W. (1989) Application of the discrete element method to modeling the subsurface penetration of a uniform cover. Proc. 1st Conf. DEM, Golden, CO.
280. Wriggers and Simo, J.C. (1985) A note on tangent stiffness for fully nonlinear contact problems. Commun. Appl. Numer. Meth. 1, 199-203.
281. Wright, T.W. (1987) Steady shearing in a viscoplastic solid. J. Mech. Phys. of Solids, 35, 269-282.
282. Wylen, G.J.V. and Sonntao, R.E. (1985) Fundamentals of Classical Thermodynamics. 3rd edition, John Wiley & Sons, New York.
283. Xu, B.H., Yu, A.B., Chew, S.J. and Zulli, P. (2000) Numerical simulation of the gas-solid flow in a bed with lateral gas blasting. Powder Technol. 109, 13-26.
284. Yamamoto, T. and Hakuno, M. (1989) A DEM simulation for tunnel excavation. Proc. 1st U.S. Conf. on Discrete Element Methods, Golden, CO.
285. Yang, R.Y., Zou, R.P. and Yu, A.B. (2001) Microdynamic analysis of the flow of particles in horizontal rotating drum. 7th International Symposium on Agglomeration, Aibi, France, 569-588.
286. Zhang, D.Z. and Rauenzahn, R.M. (1997) A viscoelastic model for dense granular flows. J. Rheol. 41, 425-453.
287. Zhang, D.Z. and Rauenzahn, R.M. (2000) Stress relaxation in dense and slow granular flows. J. Rheol. 44, 1019-1041.
288. Zhang, Y. and Cundall, P.A. (1986) Numerical simulation of slow deformations. Proc. Symp. on the Mechanics of Particulate Media, Tenth U.S. National Congress of Applied Mechanics, Austin, TX.
289. Zhang, Z.P., Yu, A.B. and Oakeshott, R.B.S. (1996) Effect of packing method on the randomness of disk packing. J. Phys. A: Mathematical & General, 29, 2671-2685.
290. Zhang, Z.P., Liu, L.F., Yuan, Y.D. and Yu, A.B. (2001) Numerical study of the effects of dynamic factors on the packing of particles. Powder Technol. 116, 23-32.
291. Zhong, Z.H. and Nilsson, L. (1990) A contact searching algorithm for general 3D contact-impact problems. Comp. Struct. 34, 327-335.
292. Zhou, Y.C., Xu, B.H., Yu, A.B. and Zulli, P. (2002) An experimental and numerical study of the angle of repose of coarse spheres, Powder Technol. 125(1), 45-54.
293. Zhou, Y.C., Xu, B.H., Yu, A.B. and Zulli, P. (2001) Numerical study of sandpile formation and force evolution. Powders and Grains, Sendai, Japan, 495-498.
294. Zhou, Y.C., Xu, B.H., Yu, A.B. and Zulli, P. (2002) A numerical and experimental study of the angle of repose of granular particles. Powder Technol. 125, 45-54.
295. Zhou, Y.C., Wright, W.D., Yang, R.Y., Xu, B.H. and Yu, A.B. (1999) Rolling friction in the dynamic simulation of sandpile formation. Physica A, 269, 536-553.
296. Zhu, H.P. and Yu, A.B. (2001) Weighting ftinction in the averaging theory of granular materials. Bulk Solids Handling, 21, 53-57.
297. Zhu, H.P. and Yu, A.B. (2001) Stress distribution of hopper flow. 7th Int. Conf. on Bulk Materials Storage, Handling and Transportation, Newcastle, Australia, 283-290.
298. Zienkiewicz, O.C. and Taylor, R.L. (1989) The Finite Element Method; Basic Formulation and Linear Problems. 1, 4th edition. McGraw-Hill, London.
299. Zietlow, W.K. and Labuz, J.F. (1998) Measurement of the intrinsic process zone in rock using acoustic emission. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 35(3), 291-299.
300. Zubelewicz, A. and Mroz, Z. (1983) Numerical simulation of rockburst processes treated as problems of dynamic instability. Rock Mech. And Eng. 16, 253-274.