Engineered cementitious composite (ecc): Material, structural, and durability performance

Concrete Construction Engineering Handbook, Second Edition

Volumn , Issue , 2008, Pages 1001-1048

  Li, Victor C ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85014841249     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (125)

1. AASHTO. 2002. Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration, AASHTO T 259. American Association of State Highway and Transportation Officials, Washington, D.C.
2. AASHTO. 2004. LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials, Washington, D.C.
3. Allen, H.G. 1971. Stiffness and strength of two glass-fiber reinforced cement laminates. J. Composite Mater., 5(2), 194-207.
4. ASTM. 2003a. Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM C 666/C 666M. American Society for Testing and Materials, Philadelphia, PA.
5. ASTM. 2003b. Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals, ASTM C 672/C 672M. American Society for Testing and Materials, Philadelphia, PA.
6. ASTM. 2004. Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, ASTM C 1585. American Society for Testing and Materials, Philadelphia, PA.
7. ASTM. 2006. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM C 642. American Society for Testing and Materials, Philadelphia, PA.
8. ASTM. 2007. Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method), ASTM C 1260. American Society for Testing and Materials, Philadelphia, PA.
9. Aveston, J., Cooper, G.A., and Kelly, A. 1971. Single and multiple fracture. In The Properties of Fiber Composites, Conference Proceedings, pp. 15-24. IPC Science and Technology Press, Guildford, U.K.
10. Bache, H. 1981. Densified Cement/Ultra-Fine Particle-Based Materials, CBL Report No. 40. Aalborg Portland, Denmark.
11. Beeldens, A. and Vandewalle, L. 2001. Durability of high strength concrete for highway pavement restoration. In Proceedings of Third International Conference on Concrete Under Severe Conditions (CON-SEC’01), June 18-20, Vancouver, Canada, pp. 1230-1238.
12. Billington, S.L. and Yoon, J.K. 2004. Cyclic response of precast bridge columns with ductile fiber-reinforced concrete. ASCE J. Bridge Eng., 9(4), 353-363.
13. Boshoff, W.P. and van Zijl, G.P.A.G. 2007. Tensile creep of SHCC. In Proceedings of the Fifth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 5), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 87-96. RILEM, Paris.
14. Carpinteri, A., Gamarova, P., Ferro, G., and Plizzari, G., Eds. 2007. Proceedings of 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-6), June 17-22, Catania, Italy. Taylor & Francis, New York.
15. Chanvillard, G. and Rigaud, S. 2003. Complete characterization of tensile properties of ductal UHPFRC according to the French recommendations. In Proceedings of the Fourth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 4), Naaman, A.E. and Reinhardt, H.W., Eds., pp. 21-34. RILEM, Paris.
16. Curbach, M. and Jesse, F. 1999. High-performance textile-reinforced concrete. Struct. Eng. Int., 9(4), 289-291.
17. Fischer, G. and Li, V.C. 2002a. Effect of matrix ductility on deformation behavior of steel reinforced ECC flexural members under reversed cyclic loading conditions. ACI Struct. J., 99 (6), 781-790.
18. Fischer, G. and Li, V.C. 2002b. Influence of matrix ductility on the tension-stiffening behavior of steel reinforced engineered cementitious composites (ECC). ACI Struct. J., 99(1), 104-111.
19. Fischer, G. and Li, V.C. 2003a. Deformation behavior of fiber-reinforced polymer reinforced engineered cementitious composite (ECC) flexural members under reversed cyclic loading conditions. ACI Struct. J., 100(1), 25-35.
20. Fischer, G. and Li, V.C. 2003b. Intrinsic response control of moment resisting frames utilizing advanced composite materials and structural elements. ACI Struct. J., 100(2), 166-176.
21. Fischer, G. and Li, V.C., Eds. 2006. Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications. RILEM, Paris.
22. Fischer, G., Wang, S., and Li, V.C. 2003. Design of engineered cementitious composites for processing and workability requirements. In Proceedings of the Seventh International Symposium on Brittle Matrix Composites, October 13-15, Warsaw, Poland, pp. 29-36.
23. Fukuyama, H., Iso, M., Ogaw, A., and Suwada, H. 2007. Mitigation of damage due to crack of RC elements utilizing high-performance fiber-reinforced cementitious composites. In Proceedings of the Fifth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 5), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 427-435. RILEM, Paris.
24. Fukuyama, H., Matsuzaki, Y., Nakano, K., and Sato, Y. 1999. Structural performance of beam elements with PVA-ECC. In Proceedings of the Third International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 3), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 531-542. Chapman & Hall, London.
25. Fukuyama, H., Matzuzaki, Y., Sato, Y., Iso, M., and Suwada, H. 2000. Structural performance of engineered cementitious composite elements. In Proceedings of the 6th ASCCS International Conference on Steel-Concrete Composite Structures, March 22-24, Los Angeles, CA.
26. Fukuyama, H., Suwada, H., and Mukai, T. 2006. Test on high-performance wall elements with HPFRCC. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 365-374. RILEM, Paris.
27. Horikoshi, T., Ogawa, A., Saito, T., and Hoshiro, H. 2006. Properties of polyvinylalcohol fiber as reinforcing materials for cementitious composites. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 145-153. RILEM, Paris.
28. JSCE. 2007. Recommendations for Design and Construction of High-Performance Fiber-Reinforced Cement Composite with Multiple Fine Cracks (Draft), Japan Society of Civil Engineers, Tokyo [in Japanese].
29. Kabele, P., 2001. Assessment of Structural Performance of Engineered Cementitious Composites by Computer Simulation, CTU Reports No. 4, Vol. 5. Czech Technical University, Prague.
30. Kabele, P. and Kanakubo, T. 2007. Experimental and numerical investigation of shear behavior of PVA-ECC in structural elements. In Proceedings of the Fifth International RILEM Workshop on HighPerformance Fiber-Reinforced Cement Composites (HPFRCC 5), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 137-146. RILEM, Paris.
31. Kabele, P., Novak, L., Nemecek, J., and Pekar, J. 2007. Multiscale experimental investigation of deterioration of fiber-cementitious composites in aggressive environment. In Proc. MHM 2007: International Conference on Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, June 25-27, Prague, Jirasek, M., Bittnar, Z., and Mang, H., Eds., pp. 270-271.
32. Kamal, A., Kunieda, M., Ueda, N., and Nakamura, H. 2007. Assessment of crack elongation performance in RC beam repaired by UHP-SHCC. In Proceedings of the Ninth International JSCE Summer Symposium, September 18, Yokohama National University, Japan.
33. Kanakubo, T. 2006. Tensile characteristics: evaluation method for DFRCC. J. Adv. Concrete Technol., 4(1), 3-17.
34. Kanda, T. and Li, V.C. 1999. A new micromechanics design theory for pseudo strain hardening cementitious composite. ASCE J. Eng. Mech., 125(4), 373-381.
35. Kanda, T. and Li, V.C. 2006. Practical design criteria for saturated pseudo strain hardening behavior in ECC. J. Adv. Concrete Technol., 4(1), 59-72.
36. Kanda, T., Watanabe, S., and Li, V.C. 1998. Application of pseudo strain hardening cementitious composites to shear resistant structural elements. In Fracture Mechanics of Concrete Structures: Proceedings FramCoS-3, pp. 1477-1490. AEDIFICATIO Publishers, Freiberg, Germany.
37. Kanda, T., Saito, T., Sakat, N., and Hiraishi, H. 2001. Basic properties of sprayed repair material based on a highly ductile FRC with PVA fiber. Proc. Annu. Meet. JCI, 25(1), 475-480.
38. Kanda, T., Kanakubo, T., Nagai, S., and Maruta, M. 2006a. Technical consideration in producing ECC pre-cast structural elements. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 229-242. RILEM, Paris.
39. Kanda, T., Tomoe, S., Nagai, S., Maruta, M., Kanakubo, T., and Shimizu, K. 2006b. Full-scale processing investigation for ECC pre-cast structural elements. J. Asian Architect. Build. Eng., 5(2), 333-340.
40. Keoleian, G.A., Kendall, A., Dettling, J.E., Smith, V.M., Chandler, R., Lepech, M.D., and Li, V.C. 2005. Life cycle modeling of concrete bridge design: comparison of engineered cementitious composite link slabs and conventional steel expansion joints. ASCE J. Infrastructure Syst., 11(1), 51-60.
41. Kesner, K.E. and Billington, S.L. 2005. Investigation of infill panels made from engineered cementitious composites for seismic strengthening and retrofit. ASCE J. Struct. Eng., 131(11), 712-720.
42. Kim, Y.Y., Kong, H.J., and Li, V.C. 2003. Design of engineered cementitious composite (ECC) suitable for wet-mix shotcreting. ACI Mater. J., 100(6), 511-518.
43. Kim, Y.Y., Fischer, G., and Li, V.C. 2004. Performance of bridge deck link slabs designed with ductile ECC. ACI Struct. J., 101(6), 792-801.
44. Kojima, S., Sakat, N., Kanda, T., and Hiraishi, T. 2004. Application of direct sprayed ECC for retrofitting dam structure surface: application for Mitaka Dam. Concrete J., 42(5), 35-39 [in Japanese].
45. Kong, H.J., Bike, S., and Li, V.C. 2003. Development of a self-compacting engineered cementitious composite employing electrosteric dispersion/stabilization. J. Cement Concrete Comp., 25(3), 301-309.
46. Krenchel, H. and Stang, H. 1989. Stable microcracking in cementitious materials. In Brittle Matrix Composites 2, Brandt, A.M. and Marshall, J.H., Eds., pp. 20-33. Elsevier, Amsterdam.
47. Kunieda, M. and Rokugo, K. 2006a. Measurement of crack opening behavior within ECC under bending moment. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 313-322. RILEM, Paris.
48. Kunieda, M. and Rokugo, K. 2006b. Recent progress on HPFRCC in Japan: required performance and applications. J. Adv. Concrete Technol., 4(1), 19-33.
49. Lankard, D.R. 1986. Preparation, properties and applications of cement based composites containing 5-20 percent steel fiber reinforcement. In Steel Fiber Concrete, Shah, S.P. and Skarendahl, A., Eds. Elsevier, Amsterdam.
50. Lepech, M.D. 2006. A Paradigm for Integrated Structures and Materials Design for Sustainable Transportation Infrastructure, Ph.D. thesis. University of Michigan, Ann Arbor.
51. Lepech, M.D. and Li, V.C. 2005a. Water permeability of cracked cementitious composites. In Proceedings of the 11th International Conference on Fracture (ICF XI), March 20-25, Torino, Italy.
52. Lepech, M.D. and Li, V.C. 2005b. Design and field demonstration of ECC link slabs for jointless bridge decks. In Proceedings of ConMat’05, August 22-24, Vancouver, Canada.
53. Lepech, M.D. and Li, V.C. 2008. Large scale processing of engineered cementitious composites. ACI Mater. J., accepted.
54. Lepech, M.D., Li, V.C., Robertson, R.E., and Keoleian, G.A. 2007. Design of ductile engineered cementitious composites for improved sustainability. ACI Mater. J., submitted.
55. Leung, C.K.Y., Cheung, A.K.F., and Zhang, X. 2006. Partial use of pseudo-ductile cementitious composites in concrete components to resist concentrated stress, Key Eng. Mater., 312, 319-324.
56. Li, M., Sahmaran, M., and Li, V.C. 2007. Effect of cracking and healing on durability of engineered cementitious composites under marine environment. In Proceedings of the Fifth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 5), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 313-322. RILEM, Paris.
57. Li, V.C. 1993. From micromechanics to structural engineering: the design of cementitious composites for civil engineering applications. JSCE J. Struct. Mech. Earthquake Eng., 10(2), 37-48.
58. Li, V.C. 2000. When a crack is not a crack. In Proceedings of BMC6, Brandt, A., Marshall, I., and Li, V.C., Eds., pp. 173-185.
59. Li, V.C. 2004. Strategies for high-performance fiber-reinforced cementitious composites development. In Fiber-Reinforced Concrete: From Theory to Practice: Proceedings of the North American/European Workshop on Advances in Fiber-Reinforced Concrete, Ahmad, S., di Prisco, M., Meyer, C., Plizzari, G.A., and Shah, S., Eds., pp. 93-98. Starrylink Editrice, Brescia, Italy.
60. Li, V.C. 2007. Integrated structures and materials design. RILEM J. Mater. Struct., 40(4), 387-396.
61. Li, V.C. and Lepech, M. 2004. Crack-resistant concrete material for transportation construction. In Proceedings of the Transportation Research Board 83rd Annual Meeting, Compendium of Papers CD-ROM, Paper 04-4680. Transportation Research Board, Washington, D.C.
62. Li, V.C. and Leung, C.K.Y. 1992. Steady-state and multiple cracking of short random fiber composites. ASCE J. Eng. Mech., 118 (11), 2246-2264.
63. Li, V.C., and Stang, H. 2004. Elevating FRC material ductility to infrastructure durability. In Fiber-Reinforced Concretes (BEFIB’2004), di Prisco, M., Felicetti, R., and Plizzari, G.A., Eds., pp. 171-186. RILEM, Paris.
64. Li, V.C. and Wang, S. 2002. Failure mode and structural ductility of GFRP reinforced engineered cemen-titious composite beams. ACI Mater. J., 99(1), 11-21.
65. Li, V.C. and Wang, S. 2006. Microstructure variability and macroscopic composite properties of highperformance fiber-reinforced cementitious composites. J. Probabil. Eng. Mech., 21(3), 201-206.
66. Li, V.C. and Yang, E.H. 2007. Self-healing in concrete materials. In Self-Healing Materials: An Alternative Approach to 20 Centuries of Materials Science, van der Zwaag, S., Ed., pp. 161-193. Springer, New York.
67. Li, V.C., Wu, H.C., and Chan, Y.W. 1996. Effect of plasma treatment of polyethylene fibers on interface and cementitious composite properties. J. Am. Ceram. Soc., 79(3), 700-704.
68. Li, V.C., Wu, C., Wang, S., Ogawa, A., and Saito, T. 2002. Interface tailoring for strain-hardening PVA-ECC. ACI Mater. J., 99(5), 463-472.
69. Li, V.C., Fischer, G., Kim, Y.Y., Lepech, M., Qian, S., Weimann, M., and Wang, S. 2003. Durable Link Slabs for Jointless Bridge Decks Based on Strain-Hardening Cementitious Composites, RC-1438. Michigan Department of Transportation, Lansing.
70. Li, V.C., Horikoshi, T., Ogawa, A., Torigoe, S., and Saito, T. 2004a. Micromechanics-based durability study of polyvinyl alcohol-engineered cementitious composite (PVA-ECC). ACI Mater. J., 101(3), 242-248.
71. Li, V.C., Lepech, M., Wang, S., Weimann, M., and Keoleian, G. 2004b. Development of green ECC for sustainable infrastructure systems. In Proceedings of the International Workshop on Sustainable Development and Concrete Technology, May 20-21, Beijing, China, Wang, K., Ed., pp. 181-192.
72. Li, V.C., Qian, S., Zhang, H., and Keoleian, G.A. 2008. Sustainable Infrastructure with Durable Fiber Concrete Material, paper presented at the Seventh International Congress—Concrete: Construction's Sustainable Option, July 8-10, Dundee, Scotland.
73. Lim, Y.M. and Li, V.C. 1997. Durable repair of aged infrastructures using trapping mechanism of engineered cementitious composites. J. Cement Concrete Compos., 19(4), 373-385.
74. Maalej, M. and Li, V.C. 1994. Flexural/tensile strength ratio in engineered cementitious composites. ASCE J. Mater. Civil Eng., 6(4), 513-528.
75. Maalej, M. and Li, V.C. 1995. Introduction of strain hardening engineered cementitious composites in the design of reinforced concrete flexural members for improved durability. ACI Struct. J., 92(2), 167-176.
76. Maruta, M., Kanda T., Nagai S., and Yamamoto, Y. 2005. New high-rise RC structure using pre-cast ECC coupling beam. Concrete J., 43(11), 18-26.
77. Martinola, G., Baeuml, M.F., and Wittmann, F.H. 2004. Modified ECC by means of internal impregnation. J. Adv. Concrete Technol., 2(2), 207-212.
78. Mechtcherine, V. and Lieboldt, M. 2007. Effect of cracking on air-permeability and water absorption of strain hardening cement-based composites. In Proceedings of the Fifth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC S), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 305-312. RILEM, Paris.
79. Mechtcherine, V. and Schulze, J. 2006. Testing the behavior of strain hardening cementitious composites in tension. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp 37-46. RILEM, Paris.
80. Mehta, P.K. and Monteiro, P.J.M. 2006. Concrete: Structure, Properties, and Materials, 3rd ed. McGraw-Hill, New York.
81. Mihashi, H. and De Leite, J.P.B. 2004. State-of-the-art report on control of cracking in early age concrete. Adv. Concrete Technol., 2(2), 141-154.
82. Mitamura, H., Sakata, N., Shakushiro, K., Suda, K., and Hiraishi, T. 2005. Application of overlay reinforcement method on steel deck utilizing engineering cementitious composites: Mihara Bridge. Bridge Foundation Eng., 39(8), 88-91.
83. Miyazato S. and Hiraishi, Y. 2005. Transport properties and steel corrosion in ductile fiber reinforced cement composites. In Proceedings of the 11th International Conference on Fracture (ICFXI), March 20-25, Torino, Italy.
84. Mobasher, B., Peled, A., and Pahilajani, J. 2006. Distributed cracking and stiffness degradation in fabric-cement composites. Mater. Struct., 39, 317-331.
85. Mora, J., Aguado, A., and Gettu, R. 2003. The influence of shrinkage reducing admixtures on plastic shrinkage. Materiales de Construction, 53(271-272), 71-80.
86. Naaman, A.E. 1992. SIFCON: tailored properties for structural performance. In High-Performance Fiber-Reinforced Cement Composites, Reinhardt, H.W. and Naaman, A.E., Eds., pp. 18-38. E&FN Spon, London.
87. Naaman, A.E. and Reinhardt, H.W. 2003. Setting the stage: toward performance-based classification of FRC composites. In Proceedings of the Fourth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 4), Naaman, A.E. and Reinhardt, H.W., Eds. RILEM, Paris.
88. Nemecek, J., Kabele, P., Kopecky, L., and Bittnar, Z. 2006. Leached engineered cementitious composites. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 205-212. RILEM, Paris.
89. Neville, A.M. 1995. Properties of Concrete. 4th ed. Longman, London.
90. Oh, B.H. and Shin, K.J. 2006. Cracking, ductility and durability characteristics of HPFRCC with various mixture proportions and fibers. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 213-222. RILEM, Paris.
91. Oh, B.H., Cha, S.W., Jang, B.S., and Jang, S.Y. 2002. Development of high-performance concrete having high resistance to chloride penetration. Nuclear Eng. Design (Switzerland), 212(1-3), 221-231.
92. Parra-Montesinos, G. and Wight, J.K. 2000. Seismic response of exterior RC column-to-steel beam connections. ASCE J. Struct. Eng., 126(10), 1113-1121.
93. Proctor, B.A., Oakley, D.R., and Litherland, K.L., 1982. Developments in the assessment and performance of GRC over 10 years. Composites, 13, 173-179.
94. Qian, S. 2007. Influence of Concrete Material Ductility on the Behavior of High Stress Concentration Zones, Ph.D. thesis. University of Michigan, Ann Arbor.
95. Qian, S. and Li, V.C. 2006. Influence of concrete material ductility on the shear response of stud connection. ACI Mater. J., 103(1), 60-66.
96. Qian, S. and Li, V.C. 2007. Simplified inverse method for determining the tensile strain capacity of strain hardening cementitious composites. J. Adv. Concrete Technol., 5(2), 235-246.
97. Reinhardt, H. and Naaman, A.E., Eds. 2007. Proceedings of the Fifth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 5). RILEM, Paris.
98. Reinhardt, H.W., Krüger, M., and Große, C.U. 2003. Concrete prestressed with textile fabric. J. Adv. Concrete Technol., 1(3), 231-239.
99. Rokugo, K., Kunieda, M., and Lim, S.C. 2005. Patching repair with ECC on cracked concrete surface. In Proceedings of ConMat’05, August 22-24, Vancouver, Canada.
100. Rokugo, K., Kanda, T., Yokota, H., and Sakata, N. 2007. Outline of JSCE recommendation for design and construction of multiple fine cracking type fiber reinforced cementitious composite (HPFRCC). In Proceedings of the Fifth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 5), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 203-212. RILEM, Paris.
101. Romualdi, N.P. and Batson, G.B. 1963. Mechanics of crack arrest in concrete. Proc. ASCE Eng. Mech. J., 89(EM3), 147-168.
102. Romualdi, J.P. and Mandel, J.A. 1964. Tensile strength of concrete affected by uniformly distributed closely spaced short lengths of wire reinforcement. Proc. ACI J., 61(6), 657-671.
103. Sahmaran, M. and Li, V.C. 2007. De-icing salt scaling resistance of mechanically loaded engineered cementitious composites. J. Cement Concrete Res., 37, 1035-1046.
104. Sahmaran, M. and Li, V.C. 2008a. Durability of mechanically loaded engineered cementitious composites under high alkaline environment. J. Cement Concrete Compos., in print.
105. Sahmaran, M. and Li, V.C. 2008b. Influence of microcracking on water absorption and sorptivity of ECC. RILEM J. Mater. Struct., submitted.
106. Sahmaran, M., Li, M., and Li, V.C. 2007. Transport properties of engineered cementitious composites under chloride exposure. ACI Mater. J., 104(6), 604-611.
107. Sahmaran, M., Li, V.C., and Andrade, C. 2008. Corrosion resistance performance of steel-reinforced engineered cementitious composites beams. ACI Mater. J., in print.
108. Shimizu, K., Kanakubo, T., Kanda, T., and Nagai, S. 2006. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 443-451. RILEM, Paris.
109. Stang, H. and Li, V.C. 1999. Extrusion of ECC-Material. In Proceedings of the Third International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC3), Reinhardt, H.W. and Naaman, A.E., Eds., pp. 203-212. Chapman & Hall, London.
110. Stang, H. and Li, V.C. 2004. Classification of fiber-reinforced cementitious materials for structural applications. In Fiber-Reinforced Concretes (BEFIB’2004), di Prisco, M., Felicetti, R., and Plizzari, G.A., Eds., pp. 197-218. RILEM, Paris.
111. Suthiwarapirak, P., Matsumoto, T., and Kanda, T., 2002. Flexural fatigue failure characteristics of an engineered cementitious composite and polymer cement mortars. JSCE J. Mater. Conc. Struct. Pavements, 718(57), 121-134.
112. Szerszen, M.M., Szwed, A., and Li, V.C. 2006. Flexural response of reinforced beam with high ductility concrete material. In Brittle Matrix Composites 8, Brandt, A.M., Li, V.C., and Marshall, I.H., Eds., pp. 263-274. Woodhead, Warsaw.
113. Takashima, H., Miyagai, K., Hashida, T., and Li, V.C. 2003. A design approach for the mechanical properties of polypropylene discontinuous fiber reinforced cementitious composites by extrusion molding. J. Eng. Fracture Mech., 70(7-8), 853-870.
114. Vandewalle, L. et al. 2003. RILEM TC 162-TDF: test and design methods for steel fibre reinforced concrete: sigma-epsilon-design method—final recommendation. Mater. Struct., 36(262), 560-567.
115. Walter, R., Li, V.C., and Stang, H. 2004. Comparison of FRC and ECC in a composite bridge deck. In Proceedings of the 5th International PhD Symposium in Civil Engineering, June 17-19, Delft, the Netherlands, pp. 477-484.
116. Wang, S. 2005. Micromechanics-Based Matrix Design for Engineered Cementitious Composites, Ph.D. thesis, University of Michigan, Ann Arbor.
117. Wang, S. and Li, V.C. 2003. Materials design of lightweight PVA-ECC. In Proceedings of the Fourth International RILEM Workshop on High-Performance Fiber-Reinforced Cement Composites (HPFRCC 4), Naaman, A.E. and Reinhardt, H.W., Eds., pp. 379-390. RILEM, Paris.
118. Wang, S. and Li, V.C. 2006a. High early strength engineered cementitious composites. ACI Mater. J., 103(2), 97-105.
119. Wang, S. and Li, V.C. 2006b. Polyvinyl alcohol fiber-reinforced engineered cementitious composites: material design and performances. In Proceedings, High-Performance Fiber-Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Fischer, G. and Li, V.C., Eds., pp. 65-73. RILEM, Paris.
120. Weiss, W.J. and Shah, S.P. 2002. Restrained shrinkage cracking: the role of shrinkage reducing admixtures and specimen geometry. Mater. Struct., 35(246), 85-91.
121. Wittmann, F.H. 2002. Crack formation and fracture energy of normal and high strength concrete. Sadhana, 27(4), 413-423.
122. Wonha Co., Ltd., S. Korea. 2004. Personal communication.
123. Yang, E.H. and Li, V.C. 2008. Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model. J. Construct. Build. Mater., in print.
124. Yang, E.H., Yang, Y., and Li, V.C. 2007. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness. ACI Mater. J., 104(6), 620-628.
125. Yang, Y., Lepech, M., and Li, V.C. 2005. Self-healing of engineered cementitious composites under cyclic wetting and drying. In Proceedings of the International Workshop on the Durability of Reinforced Concrete Under Combined Mechanical and Climatic Loads (CMCL), October 27-28, Qingdao, China, pp. 231-242.