Production, analysis and combustion characterization of biomass fast pyrolysis oil – Biodiesel blends for use in diesel engines

Fuel

Volumn 199, Issue , 2017, Pages 346-357

  Laesecke, Jan ^a   Ellis, Naoko ^a   Kirchen, Patrick ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Bio oil blends; Biodiesel; Combustion; Diesel engine; Emissions; Fast pyrolysis of biomass

Indexed keywords

BIODIESEL; BLENDING; CHEMICAL REACTORS; COMBUSTION; DIRECT INJECTION; EFFICIENCY; ENGINE CYLINDERS; FLUID CATALYTIC CRACKING; FLUIDIZED BED COMBUSTION; FLUIDIZED BEDS; HEATING; IGNITION; PARTICULATE EMISSIONS; THERMOGRAVIMETRIC ANALYSIS; VISCOSITY;

BIO OIL; COMBUSTION CHARACTERIZATION; COMBUSTION PERFORMANCE; DIRECT INJECTION DIESEL ENGINES; FAST PYROLYSIS; FLUIDIZED BED REACTORS; SINGLE-CYLINDER RESEARCH ENGINES; UNBURNED HYDROCARBONS;

DIESEL ENGINES;

EID: 85014718643     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2017.01.093     Document Type: Article

References (35)

1. [1] Bridgwater, A., Review of fast pyrolysis of biomass and product upgrading. Biomass Bioenergy 38 (2012), 68–94, 10.1016/j.biombioe.2011.01.048.
2. [2] Bridgwater, A., Meier, D., Radlein, D., An overview of fast pyrolysis of biomass. Org Geochem 30 (1999), 1479–1493, 10.1016/S0146-6380(99)00120-5.
3. [3] Czernik, S., Bridgwater, A., Overview of applications of biomass fast pyrolysis oil. Energy Fuels 18 (2004), 590–598 Doi 10.1021/Ef034067u.
4. [4] Tester, C.C., Density, R., Products, P., Electrode, G., Standard specification for pyrolysis liquid biofuel 1 (2013), 1–5, 10.1520/D7544-12.2.
5. [5] Chiaramonti, D., Oasmaa, A., Solantausta, Y., Power generation using fast pyrolysis liquids from biomass. Renew Sustain Energy Rev 11 (2007), 1056–1086, 10.1016/j.rser.2005.07.008.
6. [6] Mueller, C.J., The feasibility of using raw liquids from fast pyrolysis of woody biomass as fuels for compression-ignition engines: a literature review, 2013, 10.4271/2013-01-1691.
7. [7] Shihadeh, A., Hochgreb, S., Diesel engine combustion of biomass pyrolysis oils. Energy Fuels 14 (2000), 260–274, 10.1021/ef990044x.
8. [8] Jiang, X., Ellis, N., Upgrading bio-oil through emulsification with biodiesel: thermal stability. Energy Fuels 24 (2010), 2699–2706, 10.1021/ef901517k.
9. [9] Moloodi, S., Tzanetakis, T., Nguyen, B., Zarghami-Tehran, M., Khan, U., Thomson, M.J., Fuel property effects on the combustion performance and emissions of hardwood-derived fast pyrolysis liquid-ethanol blends in a swirl burner. Energy Fuels 26 (2012), 5452–5461, 10.1021/ef300657d.
10. [10] Van De Beld, B., Holle, E., Florijn, J., The use of pyrolysis oil and pyrolysis oil derived fuels in diesel engines for CHP applications. Appl Energy 102 (2013), 190–197, 10.1016/j.apenergy.2012.05.047.
11. [11] Prakash, R., Singh, R.K., Comparison of performance and emission parameters of a diesel engine fueled with biodiesel and wood pyrolysis oil emulsions. SAE Tech Pap 13 (2012), 123–132.
12. [12] Chiaramonti, D., Bonini, M., Fratini, E., Tondi, G., Gartner, K., Bridgwater, A., et al. Development of emulsions from biomass pyrolysis liquid and diesel and their use in engines – Part 1: emulsion production. Biomass Bioenergy 25 (2003), 85–99, 10.1016/S0961-9534(02)00183-6.
13. [13] Lee, S., Jang, Y., Kim, T.Y., Kang, K.-Y., Kim, H., Lim, J., Performance and emission characteristics of a diesel engine fueled with pyrolysis oil-ethanol blend with diesel and biodiesel pilot injection. SAE Int J Fuels Lubr 6 (2013), 785–793, 10.4271/2013-01-2671.
14. [14] Masnadi, M., Grace, J., Bi, X., Lim, J., Ellis, N., Li, Y.H., et al. From coal towards renewables: catalytic/synergistic effects during steam co-gasification of switchgrass and coal in a pilot-scale bubbling fluidized bed. Renew Energy 83 (2015), 918–930, 10.1016/j.renene.2015.05.044.
15. [15] Salehi, E., Abedi, J., Harding, T., Bio-oil from sawdust: effect of operating parameters on the yield and quality of pyrolysis products. Energy Fuels 25 (2011), 4145–4154, 10.1021/ef200688y.
16. [16] DeSisto, W.J., Hill, N., Beis, S.H., Mukkamala, S., Joseph, J., Baker, C., et al. Fast pyrolysis of pine sawdust in a fluidized-bed reactor. Energy Fuels 24 (2010), 2642–2651, 10.1021/ef901120h.
17. [17] Garcia-Perez, M., Adams, T.T., Goodrum, J.W., Geller, D., Das, K.C., Production and fuel properties of pine chip bio-oil/biodiesel blends. Energy Fuels 21 (2007), 2363–2372, 10.1021/ef060533e.
18. [18] Shao, J., Agblevor, F., New rapid method for the determination of total acid number (Tan) of bio-oils. Am J Biomass Bioenergy 4 (2015), 1–9, 10.7726/ajbb.2015.1001.
19. [19] Kass, M.D., Janke, C., Connatser, R., Lewis, S., Keiser, J., Theiss, T., Compatibility assessment of elastomeric infrastructure materials with neat diesel and a diesel blend containing 20 percent fast pyrolysis bio-oil. SAE Int J Fuels Lubr, 8, 2015, 10.4271/2015-01-0888 2015-01-0888.
20. [20] Rochussen, J., Yeo, J., Kirchen, P., Effect of fuelling control parameters on combustion and emissions characteristics of diesel-ignited natural gas dual-fuel combustion. SAE World Congr, 2016, 10.4271/2016-01-0792.Copyright.
21. [21] Heywood JBCN-J or ABRRT. H. Internal combustion engine fundamentals. McGraw-Hill Ser Mech Eng 1988:xxix, 930 2 of plates; 1988.
22. [22] The role of catalysis for the sustainable production of bio-fuels and bio-chemicals. Amsterdam, NL: Elsevier Science; 2013.
23. [23] Murphy, M.J., Taylor, J.D., Mccormick, R.L., Compendium of experimental cetane number data. Natl Renew Energy Lab, 2004, 1–48, 10.2172/1086353.
24. [24] Cheng A, Dibble R, Buchholz B. The effect of oxygenates on diesel engine particulate matter. SAE-Paper; 2002. http://dx.doi.org/10.4271/2002-01-1705.
25. [25] Zhou, L., Boot, M.D., Johansson, B.H., Reijnders, J.J.E., Performance of lignin derived aromatic oxygenates in a heavy-duty diesel engine. Fuel 115 (2014), 469–478, 10.1016/j.fuel.2013.07.047.
26. [26] Tesfa, B., Mishra, R., Zhang, C., Gu, F., Ball, A.D., Combustion and performance characteristics of CI (compression ignition) engine running with biodiesel. Energy 51 (2013), 101–115, 10.1016/j.energy.2013.01.010.
27. [27] Suppes, G., Tui, Y., Regehr, E., Hydrophilic diesel fuels – ignition delay times of several different blends. State Altern Fuel Technol, 1997, 10.4271/971686.
28. [28] Menkiel, B., Donkerbroek, A., Uitz, R., Cracknell, R., Ganippa, L., Combustion and soot processes of diesel and rapeseed methyl ester in an optical diesel engine. Fuel 118 (2014), 406–415, 10.1016/j.fuel.2013.10.074.
29. [29] Hribernik, A., Kegl, B., Influence of biodiesel fuel on the combustion and emission formation in a direct injection (DI) diesel engine. Energy Fuels 21 (2007), 1760–1767, 10.1021/ef0700432.
30. [30] Bittle, J.A., Knight, B.M., Jacobs, T.J., Interesting behavior of biodiesel ignition delay and combustion duration. Energy Fuels 24 (2010), 4166–4177, 10.1021/ef1004539.
31. [31] Huang, Y., Han, X., Shang, S., Wang, L., Performance and emissions of a direct-injection diesel engine operating on emulsions of corn stalk bio-oil in diesel. Proc Inst Mech Eng Part D J Automob Eng 226 (2012), 1119–1129, 10.1177/0954407012438295.
32. [32] Shihadeh, A., Hochgreb, S., Impact of biomass pyrolysis oil process conditions on ignition delay in compression ignition engines. Energy Fuels 16 (2002), 552–561, 10.1021/ef010094d.
33. [33] Sison, K., Ladommatos, N., Song, H., Zhao, H., Soot generation of diesel fuels with substantial amounts of oxygen-bearing compounds added. Fuel 86 (2007), 345–352, 10.1016/j.fuel.2006.07.019.
34. [34] Hoekman, S.K., Robbins, C., Review of the effects of biodiesel on NOx emissions. Fuel Process Technol 96 (2012), 237–249, 10.1016/j.fuproc.2011.12.036.
35. [35] Lee, S., Kim, T., Kang, K., Performance and emission characteristics of a diesel engine operated with wood pyrolysis oil. Proc Inst Mech Eng Part D J Automob Eng 228 (2013), 180–189, 10.1177/0954407013502951.