Towards stable and commercially available perovskite solar cells

Nature Energy

Volumn 1, Issue 11, 2016, Pages

  Park, Nam Gyu ^a   Grätzel, Michael ^b   Miyasaka, Tsutomu ^c   Zhu, Kai ^d   Emery, Keith ^d  

^a Sungkyunkwan University   (South Korea)

^b Chemistry Section   (Switzerland)

^c TOIN UNIVERSITY OF YOKOHAMA   (Japan)

^d NATIONAL RENEWABLE ENERGY LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EFFICIENCY; GRAIN BOUNDARIES; MANUFACTURE; PEROVSKITE; TOXIC MATERIALS; TRANSPORTATION ROUTES;

DEVICE ARCHITECTURES; DEVICE CHARACTERIZATION; HIGH PERFORMANCE DEVICES; INTERFACIAL CHARGE; LONG TERM STABILITY; MANUFACTURING METHODS; POWER CONVERSION EFFICIENCIES; STABLE PERFORMANCE;

PEROVSKITE SOLAR CELLS;

EID: 85014259983     PISSN: None     EISSN: 20587546     Source Type: Journal    
DOI: 10.1038/nenergy.2016.152     Document Type: Review

References (51)

1. Miyasaka, T. Perovskite photovoltaics: rare functions of organo lead halide in solar cells and optoelectronic devices. Chem. Lett. 44, 720-729 (2015
2. Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050-6051 (2009
3. Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. 6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale 3, 4088-4093 (2011
4. Kim, H.-S., et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012
5. Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338, 643-647 (2012
6. Best research-cell efficiencies NREL (2016); www.nrel.gov/ncpv/images/efficiencyčhart.jpg
7. Jeon, N. J., et al. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat. Mater. 13, 897-903 (2014
8. Xiao, M., et al A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. Angew. Chem. Int. Ed. 53, 9898-9903 (2014
9. Li, X., et al A vacuum flash-Assisted solution process for high-efficiency large-Area perovskite solar cells. Science 353, 58-62 (2016
10. Ahn, N., et al. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead(ii) iodide. J. Am. Chem. Soc. 137, 8696-8699 (2015
11. Lee, J. W., Kim, H. S., & Park, N. G. Lewis acid-base adduct approach for high efficiency perovskite solar cells. Acc. Chem. Res. 49, 311-319 (2016
12. Long, R., Liu, J., & Prezhdo, O. V. Unravelling the effects of grain boundary and chemical doping on electron-hole recombination in CH3NH3PbI3 perovskite by time-domain atomistic simulation. J. Am. Chem. Soc. 138, 3884-3890 (2016
13. deQuilettes, D. W., et al. Impact of microstructure on local carrier lifetime in perovskite solar cells. Science 8, 683-686 (2015
14. Shao, Y., et al. Grain boundary dominated ion migration in polycrystalline organic-inorganic halide perovskite films. Energy Environ. Sci. 9, 1752-1759 (2016
15. Son, D.-Y., et al. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells. Nat. Energy 1, 16081 (2016
16. Grätzel, M. Light and shade of perovskite solar cells. Nat. Mater. 13, 838-842 (2014
17. Chen, W., et al. Efficient and stable large-Area perovskite solar cells with inorganic charge extraction layers. Science 350, 944-948 (2015
18. Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlo, E. D. Solar efficiency tables (version 47). Prog. Photovolt. Res. Appl. 24, 3-11 (2016
19. Noel, N. K., et al. Lead-free organic-inorganic tin halide perovskites for photovoltaic applications. Energy Environ. Sci. 7, 3061-3068 (2014
20. Kumar, M. H., et al. Lead-free halide perovskite solar cells with high photocurrents realized through vacancy modulation. Adv. Mat. 26, 7122-7127 (2014
21. Correa Baena, J. P., et al. Highly efficient planar perovskite solar cells through band alignment engineering. Energy Environ. Sci. 8, 2928-2934 (2015
22. Bi, D., et al. Efficient luminescent solar cells based on tailored mixed-cation perovskites. Sci. Adv. 2, e1501170 (2016
23. Tress, W., et al. Predicting the open-circuit voltage of CH3NH3PbI3 perovskite solar cells using electroluminescence and photovoltaic quantum efficiency spectra: the role of radiative and non-radiative recombination. Adv. Energy Mat. 5, 1400812 (2015
24. Ross, R. T. Some thermodynamics of photochemical systems. J. Chem. Phys. 46, 4590 (1967
25. Kirchartz, T., et al. Reciprocity between electroluminescence and quantum efficiency used for the characterization of silicon solar cells. Prog. Photovolt. Res. Appl. 17, 394-402 (2009
26. Zhao, Y., & Zhu, K. Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications. Chem. Soc. Rev. 45, 655-689 (2016
27. Shao Y., et al. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells. Nat. Commun. 5, 5784 (2014
28. De Bastiani, M., et al. Ion migration and the role of preconditioning cycles in the stabilization of the J-V characteristics of inverted hybrid perovskite solar cells. Adv. Energy Mater. 6, 1501453 (2016
29. Ihly, R., et al. Efficient charge extraction and slow recombination in organic-inorganic perovskites capped with semiconducting single-walled carbon nanotubes. Energy Environ. Sci. 9, 1439-1449 (2016
30. Schulz, P., et al. Charge transfer dynamics between carbon nanotubes and hybrid organic metal halide perovskite films. J. Phys. Chem. Lett. 7, 418-425 (2016
31. Sanehira, E. M., et al. The influence of electrode interfaces on the stability of perovskite solar cells: reduced degradation using MoOx /.Al for hole collection. ACS Energy Lett. 1, 38-45 (2016
32. Mei, A., et al A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability. Science 345, 295-298 (2014
33. Li, X., et al. Outdoor performance and stability under elevated temperatures and long-Term light soaking of triple-layer mesoporous perovskite photovoltaics. Energy Tech. 3, 551-555 (2015
34. Li, X., et al. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ?-Ammonium chlorides. Nat. Chem. 7, 703-711 (2015
35. Qin, C., Matsushima, T., Fujihara, T, Potscavage, W. J. Jr & Adachi, C. Degradation mechanisms of solution-processed planar perovskite solar cells: thermally stimulated current measurement for analysis of carrier traps. Adv. Mater. 28, 466-471 (2016
36. Berhe, T. A., et al. Organometal halide perovskite solar cells: degradation and stability. Energy Environ. Sci. 9, 323-356 (2016
37. Lee, J.-W., et al. Formamidinium and cesium hybridization for photo- And moisture-stable perovskite solar cell. Adv. Energy Mater. 5, 1501310 (2015
38. Unger, E. L., et al. Hysteresis and transient behavior in current-voltage measurements of hybrid-perovskite absorber solar cells. Energy Environ. Sci. 7, 3690-3698 (2014
39. Tress, W., et al. Understanding the rate-dependent J-V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field. Energy Environ. Sci. 8, 995-1004 (2015
40. A solar checklist. Nat. Photon. 9, 703 (2015
41. Snaith, H. The perils of solar cell efficiency measurements. Nat. Photon. 6, 337-340 (2012
42. Reporting standards. Nat. Nanotech. 10, 909 (2015
43. Emery, K. A., et al. Methods for measuring solar cell efficiency independent of reference cell or light source. In Proc. 18th IEEE Photovoltaic Specialists Conference 623-628 (IEEE, 1985
44. Snaith, H. How should you measure your excitonic solar cells? Energy Environ. Sci. 12, 6513-6520 (2012
45. Long, Y.-S., Hsu, S.-T., & Wu, T.-C. Induction of internal capacitance effect in performance measurement of OPV (organic photovoltaic) device by RTOSM (real-Time one-sweep method). J. Energy Power Eng. 8, 1059-1066 (2014
46. Babayigit, A., Ethirajan, A., Muller, M., & Conings, B. Toxicity of organometal halide perovskite solar cells. Nat. Mater. 15, 247-251 (2016
47. Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen. D. Rain on methylammonium lead iodide based perovskites: possible environmental effects of perovskite solar cells. J. Phys. Chem. Lett. 6, 1543-1547(2015
48. Wuana, R. A., & Okieimen, F. E. Heavy metals in contaminated soils: a review of sources, chemistry, risks and best available strategies for remediation. ISRN Ecol. 2011, 402647 (2011
49. Sutherland, B. R., & Sargent, E. H. Perovskite photonic sources. Nat. Photon. 10, 295-302 (2016
50. Yakunin, S., et al. Detection of X-ray photons by solution-processed lead halide perovskites. Nat. Photon. 9, 444-450 (2015
51. Choi, J., et al. Organolead halide perovskites for low operating voltage multilevel resistive switching. Adv. Mater. 28, 6562-6567 (2016