Subsea Pipelines and Risers

Subsea Pipelines and Risers

Volumn , Issue , 2005, Pages

  Bai, Yong ^a   Bai, Qiang ^b  

^a Offshore Pipelines and Risers OPR Inc   (United States)

^b NONE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85014154826     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-044566-3.X5000-3     Document Type: Book

References (530)

1. Bai Y., Damsleth P.A. Limit-state Based Design of Offshore Pipelines. Proc. of OMAE '97 1997.
2. Bai Y., Song R. Fracture Assessment of Dented Pipes with Cracks and Reliability-based Calibration of Safety Factors. International Journal of Pressure Vessels and Piping 1997, Vol. 74:221-229.
3. Bai Y., Xu T., Bea R. Reliability-based Design & Requalification criteria for Longitudinally Corroded Pipelines. Proc. of ISOPE'97 1997.
4. Bai Y., Damsleth P.A. Design Through Analysis Applying Limit-state Concepts and Reliability Methods. Proc. of ISOPE'98. A plenary presentation at ISOPE'98 1998.
5. Damsleth P.A., Bai Y., Nystrøm P.R., Gustafsson C. Deepwater Pipeline Installation with Plastic Strain. Proc. of OMAE'99 1999.
6. Hauch S., Bai Y. Use of Finite Element Methods for the Determination of Local Buckling Strength. Proc. Of OMAE '98 1998.
7. Kristiansen N.Ø., Bai Y., Damsleth P.A. Ratcheting of High Pressure High Temperature Pipelines. Proc. Of OMAE '97 1997.
8. Kristiansen N.Ø., Tørnes K., Nystrøm P.R., Damsleth P.A. Structural Modeling of Multi-span Pipe Configurations Subjected to Vortex Induced Vibrations. Proc. of ISOPE'98 1998.
9. Langford G., Kelly P.G. Design, Installation and Tie-in of Flowlines. JPK Report Job No. 4680.1 1990.
10. Nødland S., Bai Y., Damsleth P.A. Reliability Approach to Optimize Corrosion Allowance. Proc. of Int. Conf. on Risk based & Limit-state Design & Operation of Pipelines 1997.
11. Nødland S., Hovdan H., Bai Y. Use of Reliability Methods to Assess the Benefit of Corrosion Allowance. Proc. of EUROCORR'97 1997, Vol.2:47-54.
12. Nystrøm P., Tørnes K., Bai Y., Damsleth P. Dynamic Buckling and Cyclic Behavior of HP/HT Pipelines. Proc. of ISOPE'97 1997.
13. Ose B.A., Bai Y., Nystrøm P.R., Damsleth P.A. A finite element model for In-situ Behavior of Offshore Pipelines on Uneven Seabed and its Application to On-Bottom Stability. Proc. of ISOPE'99 1999.
14. Reid A., Grytten T.I., Nystrøm P.R. Case Studies in Pipeline Free Span Fatigue. Proc. of ISOPE'2000 2000.
15. Tørnes K., Nystrøm P., Kristiansen N.Ø., Bai Y., Damsleth P.A. Pipeline Structural Response to Fishing Gear Pullover Loads. Proc. of ISOPE'98 1998.
16. ABS Guide for Building and Classing Subsea Pipelines and Risers 2001, March 2001, American Bureau of Shipping.
17. ASME B31.1 Code for Pressure Piping 1951, American Society of Mechanical Engineers.
18. ASME B31.3 Chemical plant and petroleum refinery piping 1993, American Society of Mechanical Engineers.
19. ASME 31.4 Code for liquid transportation systems for hydrocarbons, liquid petroleum gas, anhydrous ammonia, and alcohol's 1992, American Society of Mechanical Engineers.
20. ASME B31.8 Code for Gas Transmission and Distribution Piping Systems 1992, (1994 Addendum), American Society of Mechanical Engineers.
21. API RP1111 Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines 1998.
22. BSI: BS 8010 Code of Practice for Pipeline - Part 3. Pipeline Subsea: Design, Construction and Installation 1993, British Standards Institute.
23. CEN 234WG3-103 Pipelines for Gas Transmission 1993, 1993, European Committee for Standardization.
24. CSA-Z184-M86 Gas Pipeline Systems 1986, Canadian Standard Association.
25. DNV Offshore Standard OS-F101 Submarine Pipeline Systems 2000.
26. Jiao G., et al. The SUPERB Project: Wall-thickness Design Guideline for Pressure Containment of Offshore Pipelines. Proc.of OMAE'96 1996.
27. J P Kenny A/S Buckling Arrestor Design 1997, Report No. D501-PK-P121-F-CE-003.
28. NEN Requirements for Steel Pipeline Transportation System 1992, NEN 3650, 1992.
29. NPD Guidelines to Regulations Relating to Pipeline Systems in the Petroleum activities 1990, 30 April 1990.
30. Sotberg T., Bruschi R. Future Pipeline Design Philosophy - Framework. Int. Conf. on Offshore Mechanics and Arctic Engineering 1992.
31. Sriskandarajah T., Mahendran I.K. Parametric Consideration of Design and Installation of Deepwater Pipelines 1987, Presented at 1987 European Seminar Offshore Oil and Gas Pipeline Technology, Brown and Root U.K. Ltd.
32. Verley R., et al. Wall thickness design for high pressure offshore gas pipelines. Int. Conf. on Offshore Mechanics and Arctic Engineering 1994.
33. ABS Guide for Building and Classing Undersea Pipelines and Risers 2000, American Bureau of Shipping.
34. API Design, Construction, Operation and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) 1998.
35. Bai Y., Igland R., Moan T. Tube Collapse under Combined Pressure, Tension and Bending. International Journal of Offshore and Polar Engineering 1993, Vol. 3(2):121-129.
36. Bai Y., Igland R., Moan T. Ultimate Limit States for Pipes under Combined Tension and Bending. International Journal of Offshore and Polar Engineering 1994, 312-319.
37. Bai Y., Igland R., Moan T. Collapse of Thick Tubes under Combined Tension and Bending. Journal of Constructional Steel Research 1995, 233-257.
38. Bai Y., Igland R., Moan T. Tube Collapse under Combined External Pressure, Tension and Bending. Journal of Marine Structures 1997, Vol. 10(No.5):389-410.
39. Bai Y., Hauch S. Analytical Collapse of Corroded Pipes. ISOPE '98 1998.
40. Bai Y., Hauch S., Jensen J.C. Local Buckling and Plastic Collapse of Corroded Pipes with Yield Anisotropy. ISOPE'99 1999.
41. Bruschi R., Monti P., Bolzoni G., Tagliaferri R. Finite Element Method as Numerical Laboratory for Analysing Pipeline Response under Internal Pressure, Axial Load, Bending Moment. OMAE'95 1995.
42. BSI Code of Practice for Pipeline - Part 3. Pipeline Subsea: Design, Construction and Installation 1993, BS 8010, British Standards Institute.
43. Chen W.F., Sohal I.S. Cylindrical Members in Offshore Structures. Thin-Walled Structure 1988, Vol. 6. 1988, Special Issue on Offshore Structures, Elsevier Applied Science.
44. Corona E., Kyriakides A. Collapse of Pipelines under Combined Bending and External Pressure. BOSS'88 1988.
45. DNV Rules for Submarine Pipeline Systems 1996, December 1996, Det Norske Veritas.
46. Ellinas C.P., Raven P.W.J., Walker A.C., Davies P. Limit State Philosophy in Pipeline Design. Journal of Energy Resources Technology 1986, Jan. 1986, Transactions of ASME.
47. Gresnigt A.M. Plastic Design of Buried Steel Pipelines in Settlement Areas. HERON, Delf University of Technology 1986, Vol. 31(No. 4).
48. Haagsma S.C., Schaap D. Collapse Resistance of Submarine Lines Studied. Oil & Gas Journal 1981, Feb. 1981.
49. Hauch S., Bai Y. Use of Finite Element Analysis for Local Buckling Design of Pipelines. OMAE'98 1998.
50. Hauch S., Bai Y. Bending Moment Capacity of Pipes. OMAE'99 1999.
51. Hauch S., Bai Y. Bending Moment Capacity of Grove Corroded Pipes. ISOPE'2000 2000.
52. Hill R. The mathematical theory of plasticity 1950, Oxford University Press.
53. Kyriakides S, Yeh M.K. Plastic Anisotropy in Drawn Metal Tubes. Journal of Engineering for Industry 1988, Vol. 110/303. Aug. 1988.
54. Madhavan R., Babcock C.D., Singer J. On the Collapse of Long, Thick-Walled Tubes Under External Pressure and Axial Tension. Journal of Pressure Vessel Technology 1993, Vol. 115/15. Feb. 1993.
55. Mohareb M.E., Elwi A.E., Kulak G.L., Murray D.W. Deformational Behaviour of Line Pipe. Structural Engineering Report No. 202 1994, University of Alberta, New York.
56. Murphey C.E., Langner C.G. Ultimate Pipe Strength Under Bending, Collapse and Fatigue. OMAE'85 1985.
57. SUPERB Buckling and Collapse Limit State 1996, December 1996.
58. Timoshenko S.P., Gere J.M. Theory of Elastic Stability 1961, McGraw-Hill International Book Company. 3 rd Edition.
59. Bai Y., Damsleth P.A. Limit-state Based Design of Offshore Pipelines. Proc. of OMAE'97 1997.
60. Chen M.J., Dong G., Jakobsen R.A., Bai Y. Assessment of Pipeline Girth Weld Defects. Proc. of ISOPE'2000 2000.
61. Denys R.M. A Plastic Collapse-based Procedure for girth weld defect Acceptance. Int. Conf. on Pipeline Reliability 1992.
62. Hauch S., Bai Y. Bending Moment Capacity of Pipes. OMAE'99 1999.
63. Igland R.T., Saerik S., Bai Y., Berge S., Collberg L., Gotoh K., Mainuon P., Thaulow C. Deepwater Pipelines and Flowlines. Proc. of OTC'2000 2000.
64. ISO 13623 Petroleum and Natural Gas Industries; Pipeline Transportation Systems 1997, International Standard Organisation.
65. Koets O.J., Guijt J. Troll Phase I, The Lessons Learnt. OPT'96 1996.
66. NEN NEN 3650, "Requirements for Steel Pipeline Transportation System 1992, 1992.
67. Ness O.B., Verley R. Strain Concentrations in Pipeline With Concrete Coating. Journal of Offshore Mechanics and Arctic Engineering 1996, Vol. 118.
68. Nystrøm P., Tørnes K., Bai Y., Damsleth P. Dynamic Buckling and Cyclic Behavior of HP/HT Pipelines. Proc. of ISOPE'97 1997.
69. PD 6493 Guidance on Methods for Assessing the Acceptability of Flows in Fusion Welded Structures 1991.
70. Price P., St J. Canadian Standards Association Limit-states Task Force-State of Practice Review for Pipelines and Representative References 1990.
71. Statoil Technical Specification, R-SF-260 Pipeline Welding Specification 1991.
72. Stewart G., et al. An Analytical Model to Predict the Burst Capacity of Pipelines. Proc. of OMAE'94 1994.
73. Zimmerman, et al. Development of Limit-states Guideline for the Pipeline Industry. OMAE '92 1992.
74. Brennodden H. Troll phase I - Verification of expansion curve analysis and consolidation effects 1991, SINTEF Geotechnical engineering.
75. Hland G. Penetration of large diameter pipelines. Statoil report: 97S97-8268 1997.
76. Verley R., Lund K.M. A Soil Resistance Model for Pipelines Placed on Clay Soils. Proceedings of OMAE'95 1995.
77. Dean R.G., Perlin M. Intercomparison of Near-Bottom Kinematics by Several Wave Theories and Field and Laboratory Data. Coastal Engineering 1986, 9.
78. DNV Guideline No. 14 - Free-Spanning Pipelines. Det Norske Veritas 1998.
79. Faltinsen O.M. Sea loads on Ships and Offshore Structures 1990, Cambridge University Press.
80. Fredsøe B., Sumer B.M. Hydrodynamics around Cylindrical Structures 1997, World Scientific Publishing Co.
81. Gran S. A Course in Ocean Engineering 1992, Elsevier.
82. Hibbit, Karlsson, Sorensen ABAQUS User Manuals, Version 5.7 1998.
83. Kirkgoz M.S. Particle Velocity Prediction of the Transformation Point of Plunging Breakers. Coastal Engineering 1986, Vol. 10.
84. Langen I., Gudmestad O.T., Haver S., Gilje W., Tjelta T.I. Forelesninger i Marin Teknologi. Høgskolen i Stavanger 1997.
85. ANSYS Inc. ANSYS, Ver. 5.5 1998.
86. Cooker, et al. Concepts and Applications of Finite Element Methods 1991.
87. Kristiansen N.Ø., Tørnes K., Nystrøm P.R., Damsleth P.A. Structural Modeling of Multi-span Pipe Configurations Subjected to Vortex Induced Vibrations. Proc. of ISOPE'98 1998.
88. Nystrøm P., Tørnes K., Bai Y., Damsleth P. Dynamic Buckling and Cyclic Behavior of HP/HT Pipelines. Proc. of ISOPE'97 1997.
89. Ose B.A. A finite element model for In-situ Behavior Simulation of Offshore Pipelines on Uneven Seabed Focusing On-Bottom Stability. A M.Sc. thesis performed under the author's supervision at Stavanger University for JP Kenny A/S 1998, 1998.
90. Ose B.A., Bai Y., Nystrøm P.R., Damsleth P.A. A Finite Element Model for In-situ Behavior of Offshore Pipelines on Uneven Seabed and its Application to On-Botton Stability. Proc. of ISOPE'99 1999.
91. Tørnes K., Nystrøm P.R., Damlseth P.A., Sortland H. The Behavior of High Pressure, High temperature Flowlines on very Uneven Seabed. Proc. of ISOPE'97 1997.
92. Tørnes K., Nystrøm P., Kristiansen N.Ø., Bai Y., Damsleth P.A. Pipeline Structural Response to Fishing Gear Pullover Loads. Proc. of ISOPE'98 1998.
93. Ellinas CP, Supple WJ, Vastenholt H Prevention of Upheaval Buckling of Hot Submarine Pipelines by Means of Intermittent Rock Dumping. Proceedings 22nd Offshore Technology Conference 1990, 519-528.
94. Hobbs RE In-Service Buckling of Heated Pipelines. Journal Transport Engineering 1984, 178-179.
95. Hobbs RE, Liang F Thermal Buckling of Pipelines Close to Restraints. Proceedings 8th Int. Conf on Offshore Mechanics and Arctic Eng 1989, 121-127.
96. Kershenbaum NY, Harrison GE, Choi HS Subsea Pipeline Lateral Deviation Due to High Temperature Product. Proceedings 6th Int. Offshore and Polar Eng Conf 1996, 74-79.
97. Nes H, S vik S, Levold E., Johannesen A. Expansion Control Design of Large Diameter Pipelines. Proceedings 15th Int. Conf on Offshore Mechanics and Arctic Eng 1996, 279-285.
98. Nystrøm P.R., Tørnes K., Bai Y., Damsleth P.A. 3D Dynamic Buckling and Cyclic Behavior of HP/HT Flowlines. ISOPE-1997 1998.
99. Pedersen P.T., Jensen J.J. Upheaval Creep of Buried Heated Pipelines with Initial Imperfections 1988, Marine Structures.
100. Palmer A., Ellinas C., Richards, Guijt Design of Submarine Pipelines against Upheaval Buckling. OTC 6335 1990.
101. Tørnes K., Ose B.A., Jury J., Thomson P. Axial Creeping of High Temperature Flowlines Caused by Soil Ratcheting 2000, OMAE-2000.
102. AGA Submarine Pipeline On-bottom Stability 1993, Vols. 1 and 2. project PR-178-9333, American Gas Association.
103. Bai Y., Damsleth P.A. Limit-state Based Design of Offshore Pipelines. Proc. of OMAE'97 1997.
104. Ose B.A., Bai Y., Nystrøm P.R., Damsleth P.A. A Finite Element Model for In-situ Behavior of Offshore Pipelines on Uneven Seabed and its Application to On-Botton Stability. Proc. of ISOPE'99 1999.
105. SINTEF PIPE Program.
106. SINTEF PONDUS Program "A Computer Program System for Pipeline Stability Design Utilizing a Pipeline Response Model".
107. DNV Guideline No. 14-Free-Spanning Pipelines 1998, Det Norske Veritas.
108. Grytten T.I., Reid A. VIVA Guidelines Volume 2 - Theory 1999, J P Kenny A/S.
109. Mørk K., Vitali L., Verley R. Design Guideline for Free Spanning Pipelines 1997, OMAE.
110. Mørk K., Fyrileiv O. Fatigue Design According to the DNV Guideline for Free Spanning Pipelines 1998, OMAE.
111. Mørk K., Verley R., Bryndum M., Bruschi R. Introduction to the DNV Guideline for Free Spanning Pipelines 1998, OMAE.
112. Reid A., Grytten T.I., Nystrøm P.R. Case Studies in Pipeline Free Span Fatigue. Proc. of ISOPE'2000 2000.
113. Bai Y., Damsleth P.A. Design Through Analysis Applying Limit-state Concepts and Reliability Methods. Plenary paper for ISOPE '98 1998.
114. Bai Y., Lauridsen B., Xu T., Damsleth P.A. Force Model and In-line Fatigue of Free-Spanning Pipelines in Waves. Proc. of OMAE '98 1998.
115. Blevins R.D. Flow-Induced Vibration 1994, Krieger Publishing Company.
116. Det Norske Veritas Guidelines No. 14, "Free Spanning Pipelines" 1998.
117. th Jan. 1998.
118. Mørk K.J., Vitali L., Verley R. THE MULTISPAN Project: Design Guideline for Free Spanning Pipelines. Proceedings of OMAE '97 1997.
119. Sumer M.B., Fredsøe Jørgen Hydrodynamics Around Cylindrical Structures. Advanced Series on Ocean Engineering 1997, Vol 12. Published by World Scientific.
120. Tura F., Bryndum M.B., Nielsen N.J.R. Guideline for free Spanning Piplines: Outstanding Items and Technological Innovations. Proceedings of Conference on Advances in Subsea Pipeline Engineering and Technology 1994.
121. th June 1992.
122. Xu T., Lauridsen B., Bai Y. Wave-induced Fatigue of Multi-span Pipelines. Journal of Marine Structures 1999, Vol. 12:83-106.
123. ASME B31.8 Code for Gas Transmission and Distribution Piping Systems. American Society of Mechanical Engineers 1992, (1994 Addendum).
124. Bai Y., Pedersen P.T. Impact Response of Offshore Steel Structures. International Journal of Impact Engineering 1993, Vol. 13(1):99-115.
125. DNV Guideline NO.13 - Interference between Trawl Gear and Pipelines 1997, Det Norske Veritas, Sept.
126. NPD Guidelines to Regulations Relating to Pipeline Systems in the Petroleum Activities 1990.
127. Statoil Design Guidelines for Trawl Loads on Pipelines 1996, Document No. UoD/FLT-95051.
128. Tørnes K., Nystrøm P., Kristiansen N.Ø., Bai Y., Damsleth P.A. Pipeline Structural Response to Fishing Gear Pullover Loads. Proc. of ISOPE '98. 1998.
129. Carmichael R., Fang J., Tam C. Pipe-in-pipe Systems for Deepwater Developments. Proc. of Deepwater Pipeline Technology Conference 1999.
130. Dixon, M. and Patel, M., "Analysis of Methods for Pipe-in-Pipe Systems".
131. McKelvie, M., "Bundles - Design and Construction", Integrated Graduate Development Scheme, Heriot-Watt University.
132. Bai Q., Zeng W., Tao L. Seismic Analysis of Offshore Pipeline Systems. Offshore 2004, Vol. 64(No. 10):100-104. 2004.
133. ASCE Guidelines for the Seismic Design of Oil and Gas Pipeline Systems 1984.
134. ASCE Guideline for the Design of Buried Steel Pipe 2001.
135. ASCE Seismic Design and Retrofit of Piping Systems 2002.
136. ASME B31.4 Pipeline Transportation System for Liquid Hydrocarbons and Liquids 1998.
137. Bai Y. Marine Structural Design 2003, Elsevier, Singapore.
138. Bonilla M.G. Evaluation of Potential Surface Faulting and other Tectonic Deformation. Open File Report 82-732 1982, U.S. Geological Survey.
139. DNV-OS-F101DNV Submarine Pipeline Systems 2000, Det Norske Veritas.
140. Kennedy R.P., Chow A.W., Williamson R.A. Fault Movement Effects on Buried Oil Pipeline. Journal of the Transportation Engineering Division, ASCE 1977, Vol. 103(No. TE5):617-633.
141. Newmark N.M., Hall W.J. Pipeline Design to Resist Large Fault Displacements. Proc. US National Conference on Earthquake Engineering 1975.
142. O'Rourke M.J., Liu X. Response of Buried Pipelines Subject to Earthquake Effects. Monograph No.3, Multidisciplinary Center for Earthquake Engineering Research 1999.
143. Bethune K., Hartt W.H. A Novel Approach to Cathodic Protection Design for Marine Pipelines: Part II-Applicability of the Slope Parameter Method 2000, presented at Corrosion, paper no.00674.
144. DNV Recommended Practice RP B401 Cathodic Protection Design 1993, Det Norke Veritas Industry AS.
145. Hartt W.H., Zhang X., Chu W. Issues Associated with Expiration of Galvanic Anodes on Marine Structures 2004, Presented at Corrosion, paper no. 04093.
146. Jones D.A. Principles and Prevention of Corrosion 1992, 437-445. Macmillan Inc., Hovik. First Edition.
147. NACE Standard RP 0176 Corrosion Control of Steel-Fixed Offshore Platforms Associated with Petroleum Production 1994, Houston, TX.
148. ISO/TC 67/SC 2 NP Pipeline Cathodic Protection-Part 2: Cathodic Protection of Offshore Pipelines 1993, International Organization for Standardization, New York.
149. Sunde E.D. Earth Conduction Effects in Transaction Systems 1968, 70-73. Dover Publishing Inc., Washington, DC.
150. http://www.corrosion-doctors.org/inhibitors/lesson11.htm.
151. ABAQUS Version 5.5 Users Manual, Theory Manual, Verification Examples Manual 1995, Karlsson and Sorensen, Inc., Hibbit.
152. Andersen O. Overview of sgard and Gullfaks Satellite Flowlines Systems. OMAE'97 1997.
153. Bai Y., Damsleth P.A. Limit State Design of Flowlines. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering (OMAE) 1997.
154. Bai Y., Damsleth P.A. Design Through Analysis applying Limit State Design Concepts and Reliability Methods. ISOPE'98 1998.
155. Bai Y., Damsleth P.A., Dretvik S. The sgard Flowlines Project - Limit-State Design Experience. IBC Conference on Risk-based & Limit-State Design & Operation of Pipelines 1999.
156. Bai, et al. Simulation of Ratcheting of HP/HT Flowlines. ISOPE'99 1999.
157. Damsleth P., Dretvik S. The sgard Flowlines - Phase 1 Design and Installation Design. Proc. of Offshore Pipeline Technology Conference 1998.
158. Denys R.M. A Plastic Collapse-based Procedure for Girth Weld Defect Acceptance. Int. Conf. on Pipeline Reliability 1992.
159. DNV RP E305, On-Bottom Stability Design of Submarine Structures 1988.
160. DNV Rules for Submarine Pipelines 1996, Dec. 1996.
161. DNV Interference between Trawl Gear and Pipelines 1997.
162. DNV Guideline no. 14 - Free Spanning Pipelines 1998.
163. Hobbs R.E In-service Buckling of Heated Pipelines. J. Transp. Eng. 1984, Vol.110(2). 1984.
164. Holme R., Levold E., Langford G., Slettebø H. sgard Transport - The Design Challenges for The Longest Gas Trunkline in Norway. OPT'99 1999.
165. Jee T., Hawkins M., East A. To Trench or Not to Trench. Offshore Pipeline Technology Conference 1995.
166. Jiao G., et al. The Superb Project: Wall-thickness Design Guideline for Pressure Containment of Offshore Pipelines. Proc. of OMAE'96 1996.
167. Kristiansen N.Ø., Bai Y., Damsleth P.A. Ratcheting of HP/HT Pipelines. OMAE'97 1997.
168. Kristiansen N.Ø., Tørnes K., Nystrøm P.R., Damsleth D. Structural Modeling of Multi-Span Pipe Configurations Subjected to Vortex Induced Vibrations. ISOPE'98 1998.
169. Marshall P.W. Design of Welded Tubular Connections - Basis and Use of AWS Code Provisions 1992, 1992, Elsevier.
170. st Oct., Risk Based & Limit State Design & Operation of Pipelines.
171. Moshagen H., Kjeldsen S.P. Fishing Gear Loads and Effects on Submarine Pipelines. Proc 12th Int. Offshore Technology. Conf., OTC 3782 1980.
172. Murphey, Langner Ultimate Pipe Strength Under Bending, Collapse and Fatigue. OMAE'86 1986.
173. Nystrøm P.R., Tørnes K., Bai Y., Damsleth P. 3-D Dynamic Buckling and Cyclic Behaviour of HP/HT Flowlines. ISOPE'97 1997.
174. Nødland S., Bai Y., Damsleth PA Reliability Approach to Optimize Corrosion Allowance. Proc. of Int. Conf. on Risk based & Limit-state Design & Operation of Pipelines 1997.
175. Ose B.A., Bai Y., Nystrøm P.R., Damsleth P. A Finite Element Model for In-situ Behavior of Offshore Pipelines and Its Application to On-bottom Stability. ISOPE'99 1999.
176. PD 6493 Guidance on Methods for Assessing the Acceptability of Flows in Fusion Welded Structures 1991, 1991.
177. Pedersen PT, Jensen JJ Upheaval Creep of Buried Heated Pipelines with Initial Imperfections. Journal of Marine Structures 1988.
178. SINTEF sgard flowlines-Fatigue Testing of Cr13 Tube 1997, May 1997.
179. Statoil Technical Specification, R-SF-260, Pipeline Welding Specification 1991.
180. Statoil Technical Specification, R-SP-230, Welded Linepipe-Ferritic Steel 1990.
181. Statoil Technical Specification, R-SP-233, Seamless Linepipe-Austenstic Ferritic Stainless Steel 1990.
182. Stewart G., et al. An Analytical Model to Predict the Burst Capacity of Pipelines. OMAE'94 1994.
183. Tørnes K., Nystrøm P.R., Damsleth P., Sortland L.H. The behaviour of High Pressure, High Temperature Flowlines on Very Uneven Seabed. ISOPE'97 1997.
184. Tørnes K., Nystrøm P.R., Kristiansen N.Ø., Bai Y., Damsleth P. Pipeline Structural Response to Fishing Gear Pull-Over Loads by 3D Transient FEM Analysis. ISOPE'98 1998.
185. Verley R.L.P., Moshagen B.H., Moholdt N.C. Trawl Forces on Free-Spanning Pipelines. Proc 3rd Int. Offshore and Polar Eng. Conf. 1992.
186. Zimmerman, et al. Development of Limit-states Guideline for the Pipeline Industry 1992, 1992.
187. Kaczmarski A.A., Lorimer S.E. Emergence of Flow Assurance as a Technical Discipline Specific to Deepwater: Technical Challenges and Integration into Subsea Systems Engineering. OTC 13123, Offshore Technology Conference 2001.
188. Hammerschmidt E.G. Gas Hydrate Formation in Natural Gas Pipelines. Oil & Gas J. 1939, Vo, 37(No.50):66.
189. Sloan E.D. Hydrate Engineering 2000, SPE, Aberdeen. J.B. Bloys (Ed.).
190. Pattee F.M., Kopp F. Impact of Electrically-Heated Systems on the Operation of Deep Water Subsea Oil Flowlines. OTC 11894, Offshore Technology Conference 2000.
191. Lorimer S.E., Ellison B.T. Design Guidelines for subsea Oil Systems 2000, Facilities 2000: Facilities Engineering into the Next Millennium.
192. Ansari A., Sylvester N.D., Shoham O., Brill J.P. A Comprehensive Mechanistic Model for Upward Two-Phase Flow in Wellbores. SPE 20630, SPE Annual Technical Conference 1990.
193. API RP 14E Recommended Practice for Design and Installation of Offshore Platform Piping System 1984, Apr. 1984. 4 th Edition.
194. Aziz KL, Govier G.W., Fogarasi M. Pressure Drop in Wells Producing Oil and Gas. J. Cdn., Pet. Tech. 1972, 38-48.
195. Baker A.C., Nielsen K., Gabb A. Pressure loss, liquid-holdup calculations developed. Oil & Gas Journal 1988, Mar 14, 1988.
196. Beggs H.D., Brill J.P. A Study of Two Phase Flow in Inclined Pipes. J. Pet Tech. 1973, 607-617. Trans., AIME, 240.
197. Beniksen K.H., Malnes D., Moe R., Nuland S. The Dynamic Two-Fluid Model OLGA: Theory and Application 1990, SPE 19451.
198. Brill J.P., Mukherjee H. Multiphase Flow in Wells. Monograph 1999, Vol. 17. Henry, L. Doherty Series, SPE.
199. th printing.
200. Dukler E.A., et al. Gas-Liquid Flow in Pipelines, I. Research Results 1969, AGA-API Project NX-28.
201. Duns H., Ros N.C.J. Vertical Flow of Gas and Liquid Mixtures in Wells. 6th World Pet Congress 1963, 452.
202. Fayed S.F., Otten L. Comparing Measured with Calculated Multi-phase Flow Pressure Drop 1983, 136. OGJ, Aug 22, 1983.
203. Feesa Ltd Hydrodynamic Slug Size in Multiphase Flowlines 2003, http://www.feesa.net/flowassurance.
204. Flanigan O. Effect of Uphill Flow on Pressure Drop in Design of Two-Phase Gathering Systems. Oil and Gas J. 1958, 56:132.
205. Gray W.G. Vertical flow correlation - gas wells 1978, API Manual 14BM.
206. Gregory G.A. Erosional Velocity Limitations for Oil and Gas Wells. Technical Note No. 5 1991, Neotechnology Consultants Ltd.
207. Gregory G.A. Viscosity of Heavy Oil/Condensate Blends. Technical Note No. 6 1985, Neotechnology Consultants Ltd.
208. Gregory G.A. Pipeline Calculations for Foaming Crude Oils and Crude Oil-Water Emulsions. Technical Note No. 11 1990, Neotechnology Consultants Ltd.
209. Guth E., Simha R. Kolloid-Zeitschrift 1936, Vol. 74:266.
210. Hagedom A.R., Brown K.E. Experimental Study of Pressure Gradients Occurring During Continuous Two-Phase Flow in Small-Diameter Vertical Conduits. J. Pet Tech. 1965, 475-484.
211. Larock, B. E., Jeppson, R. W., and Watters, G. Z., Hydraulics of Pipeline Systems, CRC Press.
212. Leland T.W. Phase Equilibria and Fluid Properties in the Chemical Industry 1980, 283-333. 1980, DECHEMA, Frankfurt/Main.
213. Mohinder, L., N. (Editor in Chief), Piping handbook, sixth Edition, McGraw-Hill.
214. Moody L.F. Friction Factors for Pipe Flow. Trans. ASME 1944, 66:671-678. 1944.
215. Mukherjce H., Brill J.P. Liquid Holdup Correlations for Inclined Two-Phase Flow. Journal of Petroleum Technology 1983, 1003-1008.
216. Oliemana R.V.A. Two-Phase Flow in Gas-Transmission Pipeline 1976, ASME paper 76-Pet-25, presented at Pet. Div, ASME meeting Mexico City.
217. Qrkifizewski J. Predicting Two-Phase Pressure Drops in Vertical Pipes. J, Pet Tech. 1967, 829-838.
218. Pedersen K.S., Fredenslund A., Thomassen P. Properties of Oils and Natural Gases, Gulf Publishing Company 1989.
219. Peng D.Y., Robinson D.B. A New Two-constant Equation of State. Ind. Eng. Chem. Fundam. 1976, 15:59-64. 1976.
220. PIPESIM Course Information on Flow Correlations used within PIPESIM 1997.
221. Reid R.C., Prausnitz J.M., Sherwood T.K. The Properties of Gases and Liquids 1977, 1977, McGraw-Hill, New York. 3 rd ed.
222. Salama M.M., Venkatesh E.S. Evaluation of API RP 14E Erosional Velocity Limitations for Offshore Gas Wells. OTC 4485 1983.
223. Scandpower, "OLGA 2000", OLGA School, Level I, II.
224. Smith H.V., Arnold K.E. Crude Oil Emulsions. Petroleum Engineering Handbook 1987, H.B. Bradley (Ed.).
225. Soave G. Equilibrium Constants from a Modified Redilich-Kwong Equation of State. Chem. Eng. Sci 1972, 27:1197-1203. 1972.
226. Taitel Y.M., Barnea D., Dukler A.E. Modeling Flow Patter Transitions for Steady Upward Gas-Liquid Flow in Vertical Tubes. AIChE J 1980, Vol 26:245.
227. Whitson C.H., Brule M.R. Phase Behavior. Monograph 2000, Volume 20. Henry, L. Doherty Series, SPE.
228. Woelflin, W., "The Viscosity of Crude Oil Emulsions", Drill and Prod. Prac., API, p148.
229. Wu J.C. Benefits of Dynamic Simulation of Piping and Pipelines 2001, Technotes of Paragon.
230. Xiao J.J., Shoham O., Brill J.P. A Comprehensive Mechanistic Model for Two-Phase Flow in Pipelines. SPE 20631, SPE Annual Technical Conference 1990.
231. Cochran S. Hydrate Control and Remediation Best Practices in Deepwater Oil Developments. OTC 15255, 2003 Offshore Technology Conference 2003.
232. Dittus, F. W., and Boelter, L. M. K., (1930), University of California, Berkeley, Publications on Engineering, Vo. 2, p.443.
233. Guo B., Duan S., Ghalambor A. A Simple Model for Predicting Heat Loss and Temperature Profiles in Thermal Injection Lines and Wellbores with Insulations. SPE international Thermal Operations and Heavy Oil Symposium and Western Regional Meeting 2004, SPE 86983.
234. Grealish F., Roddy I. State of the Art on Deep Water Thermal Insulation Systems. OMAE2002-28464 2002.
235. Gregory G.A. Estimation of Overall Heat Transfer Coefficient for the Calculation of Pipeline Heat Loss/Gain 1991, Technical Note No. 3, Neotechnology Consultants Ltd.
236. Hausen H. Darstellung des Warmeuberganges in Rohren durch verallgemeinerte Potezbeziehungen. Z. VDI Beih. Verfahrenstechnik 1943, (No. 4):91.
237. Hilpert R. Warmeabgabe von geheizen Drahten und Rohren. Forsch. Gebiete Ingenieurw. 1933, Vol. 4:220.
238. Horn C., Lively G. A New Insulation Technology: Prediction vs. Results from the First Field Installation. OTC13136, 2001 Offshore Technology Conference 2001.
239. Incropera F.P., DeWitt D.P. Introduction to Heat Transfer 1996, John Wiley & Sons. third Edition.
240. Kersten M.S. Thermal properties of soils. Univ. of Minnesota Eng. Exp. Station Bull. No. 28 1949, Univ. of Minnesota. Inst.
241. Loch K. Flowline Burial: An Economic Alternative to Pipe-in Pipe. OTC 12034, 2000 Offshore Technology Conference 2000.
242. MARSCO Thermal soil studies for pipeline burial insulation - laboratory and sampling program Gulf of Mexico 1999, internal report completed for Stolt Offshore.
243. Melve B. Design Requirements for High Temperature Flowline Coatings. OMAE2002-28569 2002.
244. McKechnie J.G., Hayes D.T. Pipeline Insulation Performance for Long Distance Subsea Tie-Backs. Long Distance Subsea Tiebacks 2001, Nov 26-28, 2001, Amsterdam.
245. Newson T.A., Brunning P., Stewart G. Thermal Conductivity of Offshore Clayey Backfill. OMAE2002-28020 2002.
246. Parker J.D., Boggs J.H., Blick E.F. Introduction to Fluid Mechanics and Heat Transfer 1969, Addison-Wesley Pub.
247. Pattee F.M., Kopp F. Impact of Electrically Heated System on the Operation of Deep Water Subsea Oil Flowline. OTC 11894, 2000 Offshore Technology Conference 2000.
248. Power P.T., Hawkins R.A., Christophersen H.P., McKenzie I. ROV assisted geotechnical investigation of trench backfill material aids design of the Tordis to Gullfaks flowlines. ASPECT 94, 2nd Int. Conf. on Advances in Subsea Pipeline Engineering and Technology 1994.
249. Von Herzen R., Maxwell A.E. The measurement of thermal conductivity of deep sea sediments by a needle probe method. Journal of Geophysical Research 1959, Vol. 64(No. 10):1557-1563.
250. Wang X., Chin Doreen Y., Perera R.M., Prescott C.N., Raborn G.O. Convection Heat Losses through Installation Gaps between Pipe and Insulation and between Insulation Half Shells. OTC12033, 2000 Offshore Technology Conference 2000.
251. Young A.G., Osborne R.S., Frazer I. Utilizing Thermal Properties of Seabed Soils as Cost-Effective Insulation for Subsea Flowlines. OTC 13137, 2001 Offshore Technology Conference 2001.
252. Zhang J.J, Chen M.J., Wang X., Chacko J. Thermal Analysis and Design of Hot Water Heated Production Flowline Bundles. OTC 14015, 2002 Offshore Technology Conference 2002.
253. Cochran S Hydrate Control and Remediation Best Practices in Deepwater Oil Developments. OTC 15255 2003.
254. Cochran S., Gudimetla R. Hydrate management: Its importance to deepwater gas development success. Word Oil 2004, Vol. 225:55-61.
255. Edmonds B., Moorwood R.A.S., Szczepanski R., Zhang X. Latest Developments in Integrated Prediction Modeling Hydrates, Waxes and Asphaltenes. Focus on Controlling Hydrates, Waxes and Asphaltenes, IBC 1999.
256. Ellision B., Gallagher Baker Petrolite Flow Assurance Course 2001, Houston.
257. Ellison B.T., Gallagher C.T., Lorimer S.E. The Physical Chemistry of Wax, Hydrates, and Asphaltene. OTC 11960 2000.
258. th International Conference on Gas Hydrates 2002.
259. Hammerschmidt E.G. Possible Technical Control of Hydrate Formation in Natural Gas Pipelines. Brennstoff-Chemie 1969, 50:117-123.
260. Lysne D. Ultra Long Tie-backs in Arctic Environments with the SINTEF-BP Cold Flow Concept. Oil and Gas Developments in Arctic and Cold Regions, US-Norway Oil & Gas Industry Summit 2005.
261. Lorimer S.E., Ellison B.T. Design Guidelines for Subsea Oil Systems. Facilities 2000: Facilities Engineering into the Next Millennium 2000.
262. Mehta A.P., Hebert P.B., Cadena E.R., Weatherman J.P. Fulfilling the Promise of Low Dosage Hydrate Inhibitors: Journey from Academic Curiosity to Successful Field Implementation. OTC 14057 2002.
263. Pattee F.M., Kopp F. Impact of Electrically-Heated Systems on The Operation of Deep Water Subsea Oil Flowlines. OTC11894, 2000 Offshore Technology Conference 2000.
264. Pedersen K.S., Fredenslund A., Thomassen P. Properties of Oils and Natural Gases 1989, Gulf Publishing Company.
265. Pickering P.F., Edmonds B., Moorwood R.A.S., Szczepanski R., Watson M.J. Evaluating New Chemicals and Alternatives for Mitigating Hydrates in Oil & Gas production 2003.
266. Sloan E. Offshore Hydrate Engineering Handbook. SPE Monograph 2000, Vol. 21. 2000.
267. Becker J.R. Crude Oil, Waxes, Emulsions and Asphaltenes 1997, Pennwell Publishing Company.
268. rd Annual Deepwater Pipeline & Riser Technology Conference & Exhibition 2000.
269. Chin Y. Maintaining Plug-free Flow and Remediating Plugged Pipelines 2001, Offshore, March 2001.
270. Cochran S., Gudimetla R. Hydrate management: Its importance to deepwater gas development success. Word Oil 2004, Vol. 225:55-61.
271. Edmonds B., Moorwood R.A.S., Szczepanski R., Zhang X. Latest Developments in Integrated Prediction Modelling Hydrates, Waxes and Asphaltenes. Focus on Controlling Hydrates, Waxes and Asphaltenes 1999, 1999, IBC.
272. Ellison, B. and Gallagher, "Baker Petrolite Flow Assurance Course", Houston.
273. Ellison B.T., Gallagher C.T., Lorimer S.E. The Physical Chemistry of Wax, Hydrates, and Asphaltene. OTC 11963 2000.
274. Gomes M.G.F.M., Pereira F.B., Lino A.C.F. Solutions and Procedures to Assure the Flow in Deepwater Conditions. OTC 8229 1996.
275. James H., Karl I. Paraffin, Asphaltenes Control Practices Surveyed. Oil & Gas Journal 1999, 61-63. July 12, 1999.
276. Lorimer S.E., Ellison B.T. Design Guidelines for Subsea Oil Systems. Facilities 2000: Facilities Engineering into the Next Millennium 2000.
277. Pereira A.Z.I., Khlil C.N. Advances in Multiphase Operations Offshore - New Process for the chemical De-Waxing of Pipelines. Advances in Multiphase Technology - An International Two-day Conference 1996.
278. API RP 2RD Recommended Practice for Design of Risers for Floating Production Systems and TLP's 1998, 1998. First Edition.
279. DNV VISFLOW Users Manual 1998, Det Norske Veritas 1998.
280. Hatton S.A., Willis N. Steel Catenary Riser for Deepwater Environments-STRIDE. Offshore Technology Conference 1998.
281. Hibbitt, Karlsson, Sorensen ABAQUS, Ver. 5.8 1998.
282. Langner C.G., Bharat C.S. Code Conflicts for High Pressure Flowlines and Steel Catenary Risers. OTC'97 1997.
283. Løtveit S.A., Bjrum R. Second Generation Analysis Tool for Flexible Pipes. MarinFlex 95 1995.
284. Lund K.M., Jensen P., Karunakaran D., Halse K.H. A Steel Catenary Riser Concept for Statfjord C. OMAE'98 1998.
285. Marine Computational Services (MCS) FLEXCOM-3D, Version 3.1.1 1994.
286. MIT SHEAR7 Program Theoretical Manual 1995, Department of Ocean Engineering, Massachusetts Institute of Technology, Aberdeen.
287. MIT User Guide for SHEAR7, Version 2.0 1996, Department of Ocean Engineering, Massachusetts Institute of Technology.
288. SINTEF RIFLEX- Flexible Riser System Analysis Program- User Manual. Marintek and SINTEF Division of structures and concrete report-STF70 F95218 1998.
289. API RP 2RD Recommended Practice for Design of Risers for Floating Production Systems and TLP's 1998, 1998. First Edition.
290. API, Spec.17J Specification for Unbonded Flexible Pipe 1996, December 1996. First edition.
291. ISO 13628-7 "Petroleum and natural gas industries - Design and operation of subsea production systems", Part 7: "Completion/workover riser systems" 1999, International Standardisation Organisation.
292. NPD Regulations Relating to Pipeline Systems in the Petroleum Activities 1990, 1990.
293. Veritec JIP guidelines for flexible pipes 1987, 1987.
294. Bai Y., Tang A., O'Sullivan E., Uppu K.C., Ramakrishnan S. Steel Catenary Riser Fatigue due to Vortex-Induced Spar Motions. OTC16629 2004.
295. Howells H., Lim F. Deepwater VIV riser monitoring 1999, Advances in riser technologies, Aberdeen, May 1999.
296. Huang K., Chen X., Kwan C.T. The Impact of Vortex-Induced Motions on Mooring System Design for Spar-Based Installations. OTC 15245 2003.
297. MCS (2004), Flexcom-3D, Version 6.1, User Manual.
298. Qiu W., Bai Y., Kavanagh K. Vortex-Induced Vibration Analysis of Deepwater Steel Catenary Risers 2003, Petroleum Science & Technology Forum held at The Petroleum University of China.
299. Vandiver J.K., Li L. User Guide for SHEAR7, Version 2.1 & 2.2, For Vortex-Induced Vibration Response Prediction of Beams or Cables With Slowly Varying Tension In Sheared or Uniform Flow 1998, MIT.
300. Vandiver J.K. Research Challenges in the Vortex- induced Vibration Prediction of Marine Risers. Proc. of OTC'98 1998.
301. ABS Guide for Building and Classing Subsea Pipeline Systems and Risers 2001.
302. API API 5LD, Specification for CRA Clad or Lined Steel Pipe 1993.
303. API RP 1111 - Design, Construction, Operation and Maintenance of Odffshore Hydrocarbon Pipelines (Limit State Design) 1998.
304. API RP 2RD-1998, Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) 1998.
305. Bai Y., Tang A., O'Sullivan E., Uppu E., Ramakrishnan S. Steel Catenary Riser Fatigue Due to Vortex Induced Spar Motions. OTC Paper 16629 2004.
306. Bai Y., O'Sullivan E., Galvin C., Kavanagh K. Ultra-Deepwater SCRs Design Challenges and Solutions for Semi-Submersibles 2004, Deep Offshore Technology.
307. Buitrago J., Weir M.S. Experimental Fatigue Evaluation of Deepwater Risers in Mild Sour Service. Deep Offshore Technology Conference 2002.
308. Chaudhury G., Kennefick J. Design, Testing, and Installation of Steel Catenary Risers. OTC Paper 10980 1999.
309. th Intl. Symposium on Tubular Structures 1993.
310. DNV Offshore Standard F201, "Dynamic Risers" 2001, 2001.
311. Franciss R. Vortex Induced Vibration Monitoring System in the Steel Catenary Riser of P-18 Semi-Submersible Platform 2001, OMAE2001/OFT-1164.
312. Gore C.T., Mekha B.B. Common Sense Requirements (CSRs) for Steel Catenary Risers (SCR). OTC Paper 14153 2002.
313. Grealish F., Lang D., Stevenson P. Integrated Riser Instrumentation System - IRIS 3D. IBC Conference on Deepwater Risers, Moorings & Anchorings 2002.
314. Hogan M. Flex Joints. ASME ETCE SCR Workshop 2002.
315. Korth D.R., Chou B.S.J., McCullough G.D. Design and Implementation of the First Buoyed Steel Catenary Risers. OTC Paper 14152 2002.
316. Kopp F., Perkins G., Prentice G., Stevens D. Production and Inspection Issues for Steel Catenary Riser Welds. OTC Paper 15144 2003.
317. Kopp F., Light B.D., Preli T.S., Rao V.S., Stingl K.H. Design and Installation of the Na Kika Export Pipelines, Flowlines and Risers. OTC Paper 16703 2004.
318. Mekha B.B., O'Sullivan E., Nogueira A. Design Flexibility Saves Marco Polo Oil SCR during Its Installation 2004, OMAE.
319. Phifer E.H., Kopp F., Swanson R.C., Allen D.W., Langner C.G. Design and Installation of Auger Steel Catenary Risers. OTC Paper 7620 1994.
320. Serta O.B., Mourelle M.M., Grealish F.W., Harbert S.J., Souza L.F.A. Steel Catenary Riser for the Marlim Field FPS P-XVIII. OTC Paper 8069 1996.
321. Thompson H.M., Grealish F.W., Young R.D., Wang H.K. Typhoon Steel Catenary Risers: As-Built Design and Verification. OTC Paper 14126 2002.
322. Urband, B. "CRA Clad Downhole Tubing - An Economical Enabling Technology", AADE 01-NC-HO-46, AADE National Drilling Technical Conference.
323. API RP 2RD-1998, Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) 1998, American Petroleum Institute.
324. Burke R. TTR Design and Analysis Methods. Deepwater Riser Engineering Course, Clarion Technical Conferences 2004.
325. Edwards R., Shilling R., Thethi R., Karakaya M. BP Horn Mountain Spar-Results of Comprehensive Monitoring of Platform and Riser Response 2003, DOT.
326. Jordan R., Otten J., Trent D., Cao P. Matterhorn TLP Dry-Tree Production Risers. OTC 16608 2004.
327. Utt M., Emerson E, Yu J. West Seno Drilling and Production Riser Systems. OTC 16526 2004.
328. th Edition.
329. Yu A., Allen T., Leung M. An Alternative Dry Tree System for Deepwater Spar Applications. Deep Oil Technology Conference 2004.
330. Almar-Naess A. Fatigue Handbook: Offshore Steel Structures 1985, Tapir.
331. API 17E: "Specification for Subsea Umbilical", The American Petroleum Institute.
332. API Recommended Practice 2RD Design of Risers for Floating Production Systems (FPSs) and Tension Leg Platforms 1998, 1 st Edition.
333. Bjornstad B. Umbilical Stretches Subsea Performance 2000, August 2004, E & P Magazine, New Orleans.
334. DNV Offshore Standard OS-F101 Submarine Pipeline Systems 2000.
335. DNV Recommended Practice, RP-C203 Fatigue Strength Analysis of Offshore Steel Structures 2000.
336. GE Research & Development Center Influence of Mean Stress on Low Cycle Fatigue in High Temperature Water 2000, Doc. No. 2000CRD025, May 2000.
337. Heggdal O. Integrated Production Umbilical (IPU ®) for the Fram Ost (20 km Tie-Back) Qualification and Testing. Deep Oil Technology (DOT) 2004.
338. Hoffman J., Dupont W., Reynolds B. A Fatigue-Life Prediction Model for Metallic Tube Umbilicals. OTC Paper 13203 2001.
339. ISO 13628-5 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems 2000, Part 5: Subsea Umbilicals, 2002.
340. Kavanagh W.K., Doynov K., Gallagher D., Bai Y. The Effect of Tube Friction on the Fatigue Life of Steel Tube Umbilical Risers - New Approaches to Evaluating Fatigue Life using Enhanced Nonlinear Time Domain Methods. OTC Paper 16631 2004.
341. Knapp RH Helical Wire Stresses in Bent Cables. Journal of Offshore Mechanics and Arctic Engineering 1988, (No. 110):55-61. February 1988.
342. MCS Flexcom, Version 7, User's Manual 2004.
343. Stephens R, Fuchs HO Metals in Fatigue Engineering 2001, 2001, Wiley and Sons Inc. 2 nd Edition.
344. Suresh S Fatigue of Materials. Cambridge Solid State Science Series 1991.
345. Swanson RC, Rao VS, Langner CG, Venkataraman G. Metal Tube Umbilicals-Deepwater and Dynamic Considerations. OTC Paper 7713 1995, (1995).
346. Terdre N Nexans Looking beyond Na Kika to Next Generation of Ultra-Deep Umbilical 2004, March 2004, Offshore Magazine.
347. Antal S., Nagy T., Boros A. Improvement of Bonded Flexible Pipe according to New API Stnadrad 17K. OTC 15167 2003.
348. API Specification 17J Specification for Unbonded Flexible Pipe 1999.
349. API Specification 17K Specification for Bonded Flexible Pipe 2001.
350. API Recommended Practice 17B Recommended Practice for Flexible Pipe 2002.
351. NACE MR 01-75, "Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment".
352. Remery J., Gallard R., Balague B. Design and Qualification Testing of a Flexible Riser for 10,000 psi and 6300 ft WD for the Gulf of Mexico. Deep Oil Technology Conference 2004.
353. Seymour, B., Zhang, H. and Wibner, C. "Integrated Riser and Morring Design for the P-43 and P-48 FPSOs", OTC 15140.
354. Zhang, Y., Chen, B., Qiu, L., Hill, T. and Case, M. "State of the Art Analytical Tools Improve Optimization of Unbonded Flexible Pipes for Deepwater Environments", OTC 15169.
355. Alliot V., Legras J.L., Perinet D. A Comparison between Steel Catenary Riser and Hybrid Riser Towers for Deepwater Field Developments. Deep Oil Technology Conference 2004.
356. D'Aloisio G., Fosoli P., Sykes C., Vila J. Single Hybrid Risers: Development and Installation of a Novel Deepwater Riser Concept. Deep Oil Technology Conference 2004.
357. API RP 1111 Design, Construction, Operation and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) 1999, July 1999. 3rd Edition.
358. API RP 2RD Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) 1998, June 1998. 1st Edition.
359. API 5L Linepipe 2000.
360. API RP 2T Recommend Practice for Planning, Designing, and Constructing Tension Leg Platforms 1997, August 1997. 2nd edition.
361. API RP 2A Recommend Practice for Planning, Designing and Constructing Fixed offshore platforms - Load and Resistance Factor Design 1993, July 1993. 1st edition.
362. DNV RP-B401 Recommended Practice RP B401 Cathodic Protection Design. 1993, Det Norske Veritas.
363. des Deserts L Hybrid Riser for Deepwater Offshore Africa. OTC 11875, Proceedings of the 33rd Offshore Technology Conference 2000.
364. D' Aloisio G., Foscoli P., Sykes C., Vila J. Singlke Hybrid Risers: development and Installation of a Novel Deepwater Riser Concept. Deep Oil Technology Conference 2004.
365. th Offshore Technology Conference 1988.
366. th Offshore Technology Conference 1995.
367. Franciss R. Vortex Induced Vibration Monitoring System in Steel Catenary Riser of P-18 Semi-Submersible Platform. Proceedings of OMAE'01 2001, OMAE2001/OFT-1164.
368. rd Workshop on Subsea Pipelines 2002.
369. Kaasen KE, Lie H, Solaas F, Vandiver JK Norwegian Deepwater Program: Analysis of Vortex-Induced Vibrations of Marine Risers Based on Full-Scale Measurements. OTC 11997, Proceedings of the 33rd Offshore Technology Conference 2000.
370. th Offshore Technology Conference 1995.
371. Wald G. Hybrid Riser Systems. Deepwater Riser Engineering Course, Clarion Technical Conferences 2004.
372. AMJIG Deepwater Drilling Riser Integrity Management Guidelines 2000, Revision 2, March 2000.
373. API Specification 5CT Specification for Casing and Tubing 1998, October 1998. 6 th Edition.
374. Archard J.F. Contact and Rubbing of Flat Surfaces. Journal of Applied Physics 1953, vol. 24(No. 8):981.
375. Archard J.F., Hirst W. The Wear of Metals under Unlubricated Conditions. Proceedings of The Royal Society of London, Series A 1956, Vol. 236:397. April 1956.
376. ASTM Standard E140-02, "Standard Hardness Conversion Tables for Metals Relationship among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness".
377. API RP 16Q Recommended Practice for Design, Selection, Operation and Maintenance of Marine Drilling Riser System 1993, November 1993. 1 st Edition.
378. API RP 2A-WSD Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design 2000, December 2000. Edition: 21 st.
379. API RP 1111 Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) 1999, 1999. 3rd Edition.
380. Bhushan Bharat Principles and Applications of Tribology 1999, 1999, Wiley-Interscience Publishing, New Orleans.
381. Booster E.R. Handbook of Lubrication, Theory and Practice of Tribology 1985, Vol. II:201. 1985.
382. DnV Classification Notes Fatigue Strength Analysis for Mobile Offshore Units 1984, Note No. 30.2, August 1984.
383. Geiger P.R., Norton C.V. Offshore Vessels and Their Unique Applications for the Systems Designer. Marine Technology 1995, Vol. 32(1):43-76.
384. Matlock H. Correlations for Design of Laterally Load Piles in Soft Clay. paper OTC2312 presented at the Seventh Offshore Technology Conference 1975.
385. MCS DEEPRISER Reference Manual 2001, Version 1.3, 2001.
386. Vandiver K., Lee L. User Guide for Shear7 Version 4.1 2001, March 25, 2001, Massachusetts Institute of Technology.
387. World Oil The Composite Catalog ® of Oilfield Equipment & Services 2003, the 45 th Edition.
388. Binet E., Tuset P., Mjoen S. Monitoring of Offshore Pipe. OTC 15163, Offshore Technology Conference 2003.
389. PARLOC 2001: The Update of Loss of Containment Data for Offshore Pipelines 2003, Energy Institute.
390. Grove S., et al. The Rilsan User Group and API TR17RUG. OTC 14062 2002.
391. Lecome H., Hogben S., Smith J., Bednar J., Palmer M. BP Marlin: First Flexible Pipelay with Newbuild Deepwater Pipeline Vessel. OTC 14185 2002.
392. OTO 98019 Guidelines for Integrity Monitoring of Unbonded Flexible Pipe 1998.
393. Picksley J.W., Kavanagh K., Garnham S., Turner D. Managing the Integrity of Flexible Pipe Field Systems: Industry Guidelines and Their Application. OTC 14064, Offshore Technology Conference 2002.
394. UKOOA State of the Art Flexible Riser Integrity Issues 2001, prepared by MCS, Available online at www.oilandgas.org.uk/issues/fpso/studies.htm.pdf.
395. UKOOA Guidance Note on Monitoring Methods and Integrity Assurance for Unbonded Flexible Pipe 2002, prepared by MCS, Oct. 2002. Available online at www.oilandgas.org.uk/issues/fpso/studies.htm.pdf.
396. API 5L Specification for Line Pipe 1995, 41st Edition.
397. Bai Y., Knauf G., Hillenbrand H.G. Materials and Design for High Strength Pipelines. Proc. of ISOPE'2000 2000.
398. BSI: PD6493, Guidance on methods of assessing the acceptability of flaws in fusion welded structures, British Standards Institute, (1991).
399. Chaudhari V., Ritzmann H.P., Wellnitz G., Willenbrand H.G., Willings V. German gas pipeline first to use new generation linepipe. Oil and Gas Journal 1995, January, 1995.
400. Graf M.K., Hillenbrand H.G., Niederhoff K.A. Production of Large-diameter Linepipe and Bends for the World's First Long Range pipeline in Grade X80 (GRS 550). PRC/EPRG Ninth Biennial Joint Technical Meeting on Linepipe Research 1993.
401. Graf M., Hillenbrand H.G. Production of Large Diameter Linepipe - State of The Art and Future Development Trends 1995, Europipe GmbH 1995.
402. Healy J., Billingham J. Increased Use of High Strength Steels in Offshore Engineering 1993, Welding & Metal Fabrication, July 1993.
403. Hillenbrand, et al. Manufacturability of Linepipe in Grades up to X100. TM Processed Plate HG Pipeline Technology 1995, Volume II. 1995.
404. Knauf G., Hopkins P. The EPRG Guidelines on the Assessment of Defects in Transmission Pipeline Girth Welds 1996, 620-624. 3R international (35), heft 10-11/1996.
405. Laing B.S., Dittrich S., Dorling D.V. Mechanized Field Welding of Large Diameter X-80 Pipelines. Pipeline Technology, Proceedings 2nd Int-Conf. 1995, 505-512. Elsevier, London.
406. Nakasugi H., Tamehiro H., Nishioka K., Ogata Y., Kawada Y. Recent Development of X80 Grade Linepipe 1990, Welding-90, Hamburg, F R Germany, October 22-24, 1990.
407. th Annual Offshore Technology Conference 1993.
408. Tam C., et al. Oman-India Gas Pipeline: Development of Design Methods for Hydrostatic Collapse in Deep Water. OPT '96 1996.
409. Tamehiro H. High Strength X80 and X100 Linepipe Steels. Nippon Steel Corporation. Int. Convention 'Pipelines: The Energy Link' 1996.
410. Thorbjornsen B., Dale H., Eldoy S. The NorFra Pipeline Shore Approach: Engineering Environmental and Construction Challenges. 7th International Offshore and Polar Engineering Conference 1997.
411. Bai Q., Haun R, Sumner K. Assessment of Allowable Pipeline Weld Excavation Lengths on the Lay Ramp. OPT 2003 2003.
412. API 1104 19th. Standard for Field Welding Pipelines and related Facilities 1999, American Petroleum Institute.
413. BS 4515 Specification for Welding of Steel Pipelines on Land and Offshore 1996, British Standards Institute.
414. BSI-PD 6493 Guidance on Some Methods for Assessing the Acceptability of Flaws in Fusion Welded Structures 1991, British Standards Institute, London.
415. BS 7910 Guide on Methods for Assessing the Acceptability of Flaws in Fusion Welded Structures 1999, British Standards Institute, London.
416. Young W.C., Budynas R.D. Roark's Formulas for Stress and Strain 1989, McGraw-Hill, London. 7th edition.
417. Bai Y., Damsleth P.A. Limit State Design of Offshore Pipelines. Proc. of OMAE'97 1997.
418. Bai Y., Damsleth P.A. Design Through Analysis Applying Limit State Concepts and Reliability Methods. Proc. of 8th International Offshore and Polar Engineering Conference, ISOPE-98 1998.
419. Bai Y., Damsleth P.A., Langford G. Strength Design of Deepwater Pipelines. Proc. of 2nd International Conference on Deepwater Pipeline Technology, DPT-99 1999.
420. Damsleth P.A., Dretvik S. The sgard Flowlines - Phase 1 Design and Installation Challenges. OPT'98 1998.
421. Damsleth P.A., Bai Y., Nystrøm P.R., Gustafsson C. Deepwater Pipeline Installation with Plastic Strain. Proc. of OMAE'99 1999.
422. Endal G., Ness O.B., Verley R., Holthe K., Remseth S. Behaviour of offshore pipelines subjected to residual curvature during laying. OMAE'95 1995.
423. HKS ABAQUS User manuals, version 5.7 1998, Hibbit, Karlsson og Sorensen.
424. Holme R., Levold E., Langford G., Slettebø H. sgard Transport - The Design Challenges for The Longest Gas Trunkline in Norway. OPT'99 1999.
425. Igland R.A. Reliability analysis of pipelines during laying, considering ultimate strength under combined loads. Doktor ingeniøravhandling 1997, 80. 1997, Institutt for marine konstruksjoner.
426. Langford G., Kelly P.G. Design, Installation and Tie-in of Flowlines. JP Kenny Report Job Nr. 4680.1 1990.
427. Malahy, R.C.Jr., "OFFPIPE user's guide version 2.05".
428. Martinsen M. A Finite Element Model for Pipeline Installation Analysis. A M.Sc. Thesis Performed at Stavanger University College for JP Kenny A/S, 1998 1998.
429. NOU 1974:40, Rørledninger p dypt vann.
430. Palmer A. Pipelines in Deep Water, Interaction between Design and Construction. Proceedings of Workshop on Subsea Pipelines 1997, Federal Univ. of Rio de Janeiro, NTNU Trondheim. S.E. Estefen (Ed.).
431. Rivett S.M., Raven P.W.J., Baker D.W. Pipeline Design and Construction in Deep and Ultra Deep Water - An Overview. Deep Water Drilling and Production Technology Symposium 1997.
432. Walker A., Tam C.K.W. Deepwater Pipeline Design. Deepwater Pipeline Technology (DPT) Conference 1998.
433. Ellinas C.P. J-Tube Method of Riser Installation. Offshore Pipeline Engineering 1986.
434. Langford G., Kelly PG. Design, Installation and Tie-in of Flowlines. JPK Report Job No. 4680.1 1990.
435. Phillips P.W.J. The Development of Guidelines for the Assessment of Submarine Pipeline Spans, Overall Summary Report 1986, HMSO.
436. Diverless Pipe Repair System Set for Deepwater Trials. Offshore Journal 1995.
437. th Autumn Meeting 1989.
438. Kiefner J.F., Hyatt R.W., Eiber R.J. NDT Needs for Pipeline Integrity Assurance 1986, Battelle/AGA.
439. Manelli G., Radicioni A. Deepwater Pipeline Repair Technology: A General Overview. OMAE'1994 1994.
440. South East Asia Oil Directory 1997 Produced by Oil & Gas Journal, Published by Penn Well Publishing Company.
441. ASME B31G, Manual for Determining the Remaining Strength of Corroded Pipelines 1991, American Society of Mechanical Engineers.
442. Bai Y. Marine Structural Design 2003, Elsevier Science.
443. 2 corrosion of carbon steel. CORROSION/93, paper no. 69 1993.
444. 2 corrosion: a semi-empirical model. CORROSION/95, paper no. 128 1995.
445. DNV Rules for Submarine Pipelines 1996, Det Norske Veritas.
446. 2 - corrosion control. CORROSION/96, paper no.29 1996.
447. Guedes Soares C. Quantification of Model Uncertainty in Structural Reliability. Probabilistic Methods for Structural Design 1997, Kluwer Academic Publishers. C.G. Soares (Ed.).
448. ISO/DIS 13623 Petroleum and Natural Gas Industries; Pipeline Transportation Systems 1997, International Standard Organisation.
449. Jiao G., Sotberg T., Bruschi R., Igland R.T. The SUPERB Project: Linepipe Statistical Properties and Implications in Design of Offshore Pipelines. Proc. of OMAE'97 1997.
450. Kiefner J.F. Corroded pipe: Strength and repair methods. 5th Symposium on Line Pipe Research 1974.
451. Nødland S., Bai Y., Damsleth P.A. Reliability approach to optimise corrosion allowance. Risk based & limit state design & operation of pipelines, IBC 1997.
452. Nødland S., Hovdan H., Bai Y. Use of Reliability Methods to Assess the Benefit of Coorsion Allowance. EUROCORR '97 1997.
453. NORSOK MD-P-001, Materials Selection, Rev. 1 December 1994.
454. NORSOK Standard Y-002 Reliability-based Limit-state Principles for Pipeline design 1997.
455. RCP SYSREL 9.0 1996, RCP Consulting.
456. Sotberg T., Moan T., Bruschi R., Jiao G., Mørk K.J. The SUPERB Project: Recommended Target Safety Levels for Limit State Based Design of Offshore Pipelines. Proc. of OMAE'97 1997.
457. ABS Guide for Building and Classing Subsea Pipelines and Risers 2001, March 2001, American Bureau of Shipping, Munich.
458. ASME B31G - Manual for Assessing Remaining Strength of Corroded Pipes 1996, American Society of Mechanical Engineers.
459. Bai Y., Mørk K.J. Probablistic Assessment of Dented and Corroded Pipeline. International Conference on Offshore and Polar Engineering 1994.
460. Bai Y., Xu T., Bea R. Reliability-based Design and Re-qualification Criteria for Longitudinally Corroded Pipes. ISOPE'97 1997.
461. BSI PD6493 - Guidance on Methods for Assessing the Acceptability of Flaws in Fusion Welded Structures 1991.
462. De Waard C., Lotz U., Milliams D.E. Predictive model for CO2 corrosion engineering in wet natural gas pipelines. Corrosion 1991, 976.
463. Dugstad A., Lunde L., Videm K. Parametric study of CO2 corrosion of carbon steel. Corrosion 1994.
464. Folias E.S. An Axial Crack in a Pressurised Cylindrical Shell. Int. J. of Fracture Mechanics 1965, Vol. 1(1):64-113.
465. Galambos T.V. Guide to Stability Design Criteria for Metal Structures 1988, 502-508. John Wiley & Sons, Inc.
466. Gunaltun Y.M. Combine Research and Field Data for Corrosion Rate Prediction. Corrosion, Paper No. 27 1996.
467. Hauch S., Bai Y. Bending Moment Capacity of Grove Corroded Pipes. ISOPE'2000 2000.
468. Hopkins P., Jones D.G. A Study of the Behaviour of Long and Complex-shaped Corrosion in Transmission Pipelines. Proceedings of OMAE'92 1992.
469. Jones D.G., Turner T., Ritchie D. Failure Behaviour of Internally Corroded Linepipe. OMAE'92 1992.
470. Kastner E., Roehrich E., Schmitt W., Steinbuch E. Critical Crack Sizes in Ductile Piping. Int. J. Pres. Ves. and Pipeing 1981, Vol. 9:197-219.
471. Kiefner J.F. Corroded Pipe Strength and Repair Methods. Symposium on Line Pipe Research, Pipeline Research Committee 1974, American Gas Association.
472. Kiefner J.F., Vieth P.H. A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe, RSTRENG. Project PR 3-805 Pipeline Research Committee 1989, American Gas Association.
473. Kiefner J.F., Vieth P.H. New Method Corrects Criterion for Evaluating Corroded Pipe. Oil & Gas Journal 1990.
474. Kiefner J.F., Vieth P.H. RSTRENG Users Manual 1993, Project PR 218-9205 Pipeline Research Committee, American Gas Association.
475. Klever F.J. Burst Strength of Corroded Pipe: 'Flow Stress' Revisited. Proceedings of Offshore Technology Conference, OTC 7029 1992.
476. Mandke J.S. Corrosion Causes Most Pipeline Failure in the Gulf of Mexico. Oil and Gas Journal 1990, Oct. 29, 1990.
477. Maxey W.A., Kiefner J.F., Eiber R.J., Duffy A.R. "Ductile Fracture Initiation, Propagation and Arrest in Cylindrical Vessels" Fracture Toughness. Proceedings of the 1971 National Symposium on Fracture Mechanics 1971, 70-81. Part II, ASTM STP 514, American Society for Testing and Materials.
478. Mok D.H.B., Pick R.J., Glover A.G. Behaviour of Line Pipe with Long External Corrosion. Material Performance 1990, Vol. 29(5):75-79.
479. Mok D.H.B., Pick R.J., Glover A.G., Hoff R. Bursting of Line Pipe with Long External Corrosion. International Journal of Pressure Vessel and Piping 1991, Vol. 46:159-216.
480. Sotberg T., Leira B.J. Reliability-based Pipeline Design and Code Calibration. Proceedings of 13th International Conference on Offshore Mechanics and Arctic Engineering 1994.
481. Stewart G., Klever F., Ritchie D. An Analytical Model to Predict the Burst Capacity of Pipelines. Proceedings of 13th International Conference on Offshore Mechanics and Arctic Engineering 1994.
482. API 5L Specifications 1993, American Petroleum Institutes.
483. Bai Y., Song R. Fracture Assessment of Dented Pipes with Cracks and Reliability-based Calibration of Safety Factors. Int. Jour. Pressure Vessels and Piping 1997, Vol. 74:221-229. 1997.
484. Bilby B.A., Cottrell A.H., Swinden K.H. The spread of plastic yield from a notch. Proc. Roy. Soc. 1963, A272:304.
485. BSI Guidance on methods of assessing the acceptability of flaws in fusion welded structures 1991, PD6493, British Standards Institute.
486. Heald P.T., et al. Fracture initiation toughness measurement methods. Mat. Sci. and Eng. 1971, 10:129.
487. Kiefner J.F., Vieth P.H. A modified criterion for evaluation the remaining strength of corroded pipe 1989, RSTRENG, Project PR 3-805 Pipeline Research Committee, American Gas Association, Dec. 22.
488. Kirkemo F. Application of probabilistic fracture mechanics of offshore structures. Prof. of OMAE 1988, Houston.
489. Maxey W.A., et al. Ductile fracture initiation, propagation, and arrest in cylindrical pressure vessels 1972, ASTM STP 514.
490. Newman J.C., Raju I.S. An empirical stress-intensity factor equation for the surface crack. Engineering Fracture Mechanics 1981, 15(1-2):85-191.
491. PROBAN General purpose probabilistic analysis program, DNV 1996.
492. Rolfe S.T., Novak S.T. Slow bend KIC testing of medium strength high toughness steels 1970, ASTM STP 463, American Society of Testing and Materials, USA.
493. Shannon R.W. The mechanics of low stress failure which occur as a result of severe mechanical interference - a preliminary hypothesis 1973, ERS R.571.
494. STRUREL A structural reliability analysis program system, users manual 1996, RCP Consult, Philadelphia.
495. A.IChemE, Guidelines for Evaluating the Characteristics of Vapour Cloud Explosions, flash fires and BLEVE's.
496. API 2A-LRFD: Planning, Designing and Construction of Fixed Offshore Platforms - Load and Resistance Factor Design.
497. Bea R. The Role of Human Error in the Design, Construction and Reliability of Marine Structures 1994, SSC-378, Ship Structure Committee, Munchen, Germany.
498. Bea R. in Journal of Reliability Engineering and System Safety 1997, Vol. 52. Elsevier Science Limited.
499. Dougherty E.M., Fragola J.R. Human Reliability Analysis 1986, 1986, John Wiley and Sons, USA.
500. Edmondson J.N. Human Reliability Estimates within Offshore Safety Cases. Proc. of symposium on Human Factors in Offshore Design Cases 1993.
501. Fanneløp T.E., Lryhming I. Massive Release of Gas from Long Pipelines 1981, Jan. '81 J.Energy.
502. Fanneløp T.K., Sjøon Hydrodynamics of Underwater Blowouts 1980, published by The Ship Research Institute of Norway R-97.80, Jan 1980.
503. Goldsmith, R. et al; Lifetime Risk-Adjusted Cost Comparison for Deepwater Well Riser Systems, OTC 10976.
504. HGSystem 3.0, Edited by Post, 1., Shell Research Limited, Thornton Research Center, PO Box 1, Chester, United Kingdom, TNER 94.059.
505. Norwegian Petroleum Directorate Regulations Concerning Implementation and use of Risk Analysis in the Petroleum Industry 1992, YA-049.
506. Offshore Engineer Total Maintenance takes hold on Forties field 1993, November.
507. Olshausen K.D. Consequence Modeling. Seminar on Pipeline Safety at Statoil by Scandpower A.S. 1998.
508. OREDA Offshore Reliability Data Book 1992, Veritec.
509. PARLOC'94 The Update of Loss of Containment Data for Offshore Pipelines 1996, OTH 95 468, HSE Books.
510. PARLOC 96: The Update of the Loss of Containment Data for Offshore Pipelines, OTH 551.
511. Rew P.J., Gallagher P., Deaves D.M. Dispersion of Subsea Release, Review of Prediction Methodologies 1995, prepared for the Health and Safety Executive, OTH 95 465, 1995.
512. Ritchie, D., Voermans, C., Larsen,M.H., Vrankx, W.R.; Planning Repair and Inspection of Ageing Corroded Lines Using Probabilistic Methods, Risk Based and Limite State Design and operations of pipelines-Aberdeen '98 IBC UK Conferences Ltd.,.
513. Sotberg T., et al. The SUPERB Project: Recommended Target Safety Levels for Limit Based Design of Offshore Pipelines. Proc. of OMAE'97 1997.
514. Sørheim M., Bai Y. Risk Analysis Applied to Subsea Pipeline Engineering. Proc. of OMAE'99 1999.
515. Swain A.D., Guttman H.E. Handbook of Human Reliability Analysis with Emphasis on Nuclear Power Plant Applications 1981, NUREG/CR-1278, US Nuclear Regulatory Commission, Washington D.C.
516. Willcocks J., Bai Y. Risk Based Inspection and Integrity Management of Pipeline Systems. Proc. of ISOPE'2000 2000.
517. th Conference on Human Factors in Power Plants 1988.
518. de Waard C., Lotz U. Prediction of CO2 Corrosion of Carbon Steel. CORROSION/93, paper no. 69 1993.
519. ASME B31G Manual for Determining the Remaining Strength of Corroded Pipes 1993, American Society of Mechanical Engineers.
520. Bai Y., Sørheim M., Nødland S., Damsleth P.A. LCC Modeling as a Decision Making Tool in Pipeline Design. OMAE'99 1999.
521. Bea R. The role of human error in the design, construction and reliability of marine structures 1994, Ship Structure Committee, USA.
522. Bea R. Human and organization factors in the safety of offshore structures. Risk and reliability in Marine Technology 1998, Published by A.A.Balkema. C.G. Soares (Ed.).
523. Bea R., et al. Life-cycle reliability characteristic of minimum structures. OMAE'96 1996.
524. Cui W., Mansour A.E., Elsayed T., Wirsching W. Reliability based quality and cost optimisation of unstiffened plates in ship structures. Proc. of PRADS '98 1998, Elsevier Science B.V. M.W.C. Oosterveld, S.G. Tan (Eds.).
525. 2 Corrosion of Carbon Steel. CORROSION '93, paper no. 69 1993.
526. Fabrycky W.J., Blanchard B.S. Life-cycle Cost and Economic Analysis 1991, Prentice-Hall.
527. Langford G., Kelly P.G. Design, Installation and Tie-in of Flowlines. JPK Report No. 4680.1 1990.
528. Nødland S., Bai Y., Damsleth P. Reliability approach to optimise corrosion allowance. IBC Conference on risk based & limit state design & operation of pipelines 1997.
529. Sørheim M., Bai Y. Risk Analysis Applied to Subsea Pipeline Engineering. OMAE'99 1999.
530. SYSREL A Structural System Reliability program, RCP Consulting 1996, Munich, rev. 9.10.