Machinery Failure Analysis and Troubleshooting

Machinery Failure Analysis and Troubleshooting

Volumn , Issue , 2012, Pages

  Bloch, Heinz P ^a   Geitner, Fred K ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013792527     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2010-0-67104-5     Document Type: Book

References (202)

1. VDI Guidelines No. 3822., Der Maschinenschaden. 1981;54(4):131.
2. Ludwig G.A. Tests Performed by the Builder on New Products to Prevent Failure, Loss Prevention of Rotating Machinery 1972, The American Society of Mechanical Engineers, New York: N.Y. 10017, p. 3.
3. Metals Handbook, Vol. 10, "Failure Analysis and Prevention 1975, published by the American Society for Metals, Metals Park, Ohio 44073, pp. 10-26. 8th ed.
4. Hutchings F.R. The Laboratory Examinations of Service Failures May 1957, Technical Report, Vol. III, British Engine, Boiler, and Electrical Insurance Co., Ltd, London, U.K.
5. Van der Voort G.F. Conducting the Failure Examination. Met. Eng. Quart May 1975.
6. Identification of Metals and Alloys. New York, N.Y.: International Nickel Company.
7. Symposium on Rapid Methods for Identification of Metals. Philadelphia, PA: ASTM Publication 98, American Society for Testing and Materials.
8. Wilson ML. Nondestructive Rapid Identification of Metals and Alloys by Spot Test. Hampton, VA: Langley Research Center.
9. Handbook of Loss Prevention 1978, Springer-Verlag, Berlin-Heidelburg-New York, p. 321. Allianz Versicherungs-AG, translated from the German by P. Cahn-Speyer (Eds.).
10. Investigation of Threaded Fastener Structural Integrity Oct. 1977, Final report, Contract No. NAS9-15140, DRL-T-1190, CLIN3, DRDMA 129TA, Southwest Research Institute, Project No. 15-4665.
11. Bowman Products Division. Fastener Facts. Cleveland, Ohio, 1974.
12. Dubbel, Taschenbuch für den Machinenbau 1981, 382-384. Springer Verlag, Berlin-Heidelberg-New York. 14th ed. W. Beitz, K.H. Küttner (Eds.).
13. Bickford H.J. An Introduction to the Design and Behavior of Bolted Joints 1981, Marcel Dekker, Inc., New York and Basel, p. 79.
14. Wulpi D.J. Understanding How Components Fail 1985, American Society for Metals, Metals Park, Ohio 44073.
15. Eyre T.S. Wear Characteristics of Metals October 1976, Tribology International, pp. 203-212.
16. Hydraulic Institute Standards 1975, Hydraulic Institute, Cleveland, Ohio, "Materials of Construction of Pumping Various Liquids," pp. 285-296. 13th ed.
17. Waterhouse R.B. Fretting Corrosion 1972, Pergamon Press.
18. Braunovic M. Tribology: Fretting Wear October 1981, Engineering Digest, Toronto, pp. 48-54.
19. Klein Schanzlin, Becker A.G. Centrifugal Pump Lexicon 1975, Frankenthal, Germany.
20. Hennings Cr Ermittlung des Schädigungszustandes an Zahnflanken. Schmierungstechnik 1979, 10:307-310. 10.
21. Ludema K.E. How to Select Material Properties for Wear Resistance. Chemical Engineering July 27, 1981, 89-92.
22. Ashbaugh, William G. Preventive Action Planning Avoids Corrosion Failures in the HPI. Proceedings of the Fourth International Conference on Process Plant Reliability. Houston, Texas. 1995.
23. Good WR. A Few Observations About Paper Machine Lubrication. SKF Ball Bearing Journal No. 202, p. 8.
24. Walp H.O. Recognition of the Causes of Bearing Damage as an Aid in Prevention 1958, SKF Industries.
25. Handbook of loss prevention. Translated from the German by P. Cahn-Speyer 1978, 33. Springer-Verlag, Berlin-Heidelberg-New York. A. Versicherungs-AG (Ed.).
26. Ku P.M. Gear Failure Modes-Importance of Lubrication and Mechanics. ASLe Transactions 1976, 19:239.
27. Handbook of loss prevention. Translated from the German by Cahn-Speyer 1978, Springer Verlag, Berlin. A. Versicherungs-AG (Ed.).
28. AGMA 110.xx. The American Gear Manufacturers Association. Nomenclature of Gear-Tooth Failure Modes 1979.
29. AGMA 215.01. The American Gear Manufacturers Association. (R 1974) Information Sheet for Surface Durability (Pitting) of Spur, Helical, Herringbone and Bevel Gear Teeth 1966.
30. EHD Lubricant Film Thickness Formulas for Power Transmission Gears (L. S. Akin). Journal of Lubrication Technology-Transactions of the ASME July 1974, 426-436.
31. AGMA 217.01. The American Gear Manufacturers Association, Information Sheet-Gear Scoring Design Guide for Aerospace Spur and Helical Power Gears 1965.
32. AGMA 411.xx. The American Gear Manufacturers Association. Gear Scoring Design Guide for Aerospace Spur and Helical Power Gears (undated).
33. AGMA 225.01. The American Gear Manufacturers Association. Information Sheet for Strength of Spur, Helical, Herringbone and Bevel Gear Teeth 1967.
34. AGMA 226.01. The American Gear Manufacturers Association. Information Sheet, Geometry Factors for Determining the Strength of Spur, Helical, Herringbone and Bevel Gear Teeth 1970.
35. Dudley D.W. Practical Gear Design 1954, McGraw-Hill Book Co.
36. Wattner K.W. High speed coupling failure analysis. Proceedings of 4th turbomachinery symposium 1975, Texas A & M University, College Station, TX, p. 143-148.
37. Calistrat M.M. Some aspects of wear and lubrication of gear couplings Oct. 5-9, 1974, ASME Paper No. 74-DET-94, Presented at the Design Engineering Technical Conference, New York, N.Y.
38. Bloch H.P. How to Uprate Turboequipment by Optimized Coupling Selection. Hydrocarbon Processing Jan. 1976, 87-90.
39. Bloch H.P. Selection strategy for mechanical shaft seals. Petrochemical Plants, proceedings of 38th ASME petroleum mechanical engineering workshop and conference January, 1983, 17-24. Philadelphia, Pa: Sept. 1982, 12-14. Also reprinted in Hydrocarbon Processing.
40. Neale M.J. Tribology Handbook 1973, Halsted Press, New York-Toronto.
41. Bloch H.P. Optimized Lubrication of Antifriction Bearings for Centrifugal Pumps April 17-20, 1978, ASLE Paper No. 78-AM-1D-2, Presented at the 33rd Annual Meeting, Dearborn, Michigan.
42. Bloch H.P. Criteria for Water Removal from Mechanical-Drive Steam-Turbine Lube Oils May 5-8, 1980, ASLE Paper No. 80-A-1E-1, Presented at the 35th Annual Meeting, Anaheim, California.
43. Watanabe H., Kobayashi C. Degradation of Lube Oils-Japanese Turbine Lubrication Practices and Problems. Lubrication Engineering August 1978, 34:421-428.
44. Bloch H.P. Results of a Plant-Wide Turbine Lube-Oil Reconditioning and Analysis Program. Presented at the 38th Annual Meeting of the American Society of Lubrication Engineers April 25-28, 1983, Houston, Texas.
45. Bloch H.P., Allen J.L., Russo T. Cost Justification and Latest Technology for the On-Stream Purification of Turbomachinery Lube Oil. Presented at the International Turbomachinery Maintenance Congress October 9-11, 1990, Singapore.
46. Allen J.L. On-Stream Purification of Lube Oil Lowers Plant Operating Expenses. Turbomachinery International July/August 1989, pp. 34, 35, 46.
47. Symposium on Steam Turbine Oils September 17, 1956, ASTM Special Publication No. 211.
48. Bloch H.P., Carroll J.R. Preventive Maintenance Can Be More Effective than Predictive Programs. Oil and Gas Journal July 30, 1990, 81-86.
49. Adams M.A., Bloch H.P. Vacuum Distillation Methods for Lube Oils Increase Turbomachinery Reliability, Proceedings of the 17th international turbomachinery symposium November 8-10, 1988, Texas A&M University, Dallas, Texas.
50. Bloch Heinz P. Vacuum Oil Conditioner Removes Contaminants from Lubricating Oil. Chemical Processing March 1982, 84-85.
51. Jacobson D.W. How to Handle Waste Oil. Plant Engineering June 10, 1982, 107-109.
52. Bloch Heinz P. Reclaim Compressor Seal Oil. Hydrocarbon Processing October 1974, 115-118.
53. Oelbuch, Anweisung fuer Pruefung, Ueberwachung und Pflege der im Elektrischen Betrieb verwendeten Oele und synthetischen Fluessigkeiten mit Isolierund Schmiereigenschaften/Herausgeber: VDEW. 4. Auflage, 1963, Frankfurt: Verlags- und Wirtschaftsgesellschaft der Elektrizitaetswerke (VWEW).
54. Grupp H. Moderne Untersuchungsverfahren Fuer Schmieroele und Hydraulikfluessigkeiten von Dampfturbinen. Der Maschinenschaden 1982, 55:84-87. Heft 2.
55. Sullivan J.R. In-Plant Oil Reclamation-A Case Study. Lubrication Engineering July 1982, 38:409-411.
56. Sohre JS, Paul I. Nippes, Electromagnetic Shaft Currents in Turbomachinery-An Update, Presented August 19, 1980 at the 25th Symposium on Safety in Ammonia Plants and Related Facilities, American Institute of Chemical Engineers, Portland, Oregon (also printed in abbreviated form in Volume 23, Ammonia Plant Safety, a CEP Technical Manual published by the American Institute of Chemical Engineers).
57. Sohre JS, Paul I. Nippes, Electromagnetic Shaft Currents and Demagnetization on Rotors of Turbines and Compressors, presented December 1978, at the 7th Turbomachinery Symposium, Texas A & M University, College Station, Texas.
58. Sohre JS. Shaft Currents in Rotating Equipment: Electromagnetic and Moving-Particle Induced. an informal review of literature. October 19, 1971.
59. Sohre J.S. Are Magnetic Currents Destroying Your Machinery?. Hydrocarbon Processing April 1979, 207-212.
60. Sohre J.S. Shaft Currents Can Destroy Turbomachinery. Power March 1980, 96-100.
61. Schier V. Selbsterregte Unipolare Gleichstroeme in Maschinenwellen, Elektrotechnische Zeitschrift, November 12, 1965 (in German). A translation of this article was prepared by the Associated Electrical Industries, Ltd., Power Group, Research Laboratory, Trafford Park, Manchester 17, United Kingdom. Translation #3925 Self-excited Homopolar Direct Currents in the Shafts of Machines.
62. Oearcem C.T. Bearing Currents-Their Origin and Prevention. The Electrical Journal August 1927, xxiv(8):372-376.
63. Rosenberg L.T. Eccentricity, Vibration, and Shaft Currents in Turbine Generators. AIEE Transactions April 1955, 38-41.
64. Wilcock D.F. Bearing Wear Caused by Electric Current. Electric Manufacturing February 1949, p. 108, 111.
65. Bloch A. Law Murphy's Reasons Other Why Things Go Wrong, Price, Stern, Sloan 1979, Machinemanship, Los Angeles, p. 40-45, "Metalaws, " p. 87.
66. De Bono E. Practical Thinking-4 ways to be right. 5 ways to be wrong. 5 ways to understand 1981, Penguin Books.
67. Sternberg R.J., Davidson J.E. The Mind of the Puzzler. Psychology Today June 1982, 37-44.
68. Hänny, J. Interfaces-The Achievement of Engineering Excellence, Sulzer Technical Review, 3/1981, p. 77-81.
69. Selye H. The Stress of Life 1956, McGraw-Hill Book Company, p. 308.
70. McKean K. Diagnosis by Computer-Caduceus is learning fast, has a prodigious memory and, some believe, a brilliant future as a diagnostician. Discover September 1982, 62-65.
71. Multilin Inc., "139 Series Motor Protection Relays, " Multilin Inc., Markham, Ontario, Canada.
72. Vesser, W.C., "Predictive Maintenance of Heavy-Duty Engines Through Premalfunction Waveform Analysis, " ASME Publication 74-Pet-34, p. 6.
73. Stengel R., Calling Dr Sumex-The Diagnostician's New Colleague Needs No Coffee Breaks. Time May 17, 1982, 73.
74. Sawyer's Turbomachinery Maintenance Handbook. Conn 1980, First Edition, Turbomachinery International Publications, Norwalk, I:6/29.
75. Karassik I.J. Centrifugal Pump Clinic 1981, Marcel Dekker, Inc., New York, p. 365-369.
76. Dufour John W., Nelson William E. Centrifugal Pump Sourcebook 1993, McGraw-Hill, New York, N.Y.
77. Worthington Pump Company Pump World 1980, 6(2).
78. Bloch H.P. "Root Cause Analysis of Seven Costly Pump Failures, Proceedings of 7th International Pump Users Symposium 1990, Texas A&M University.
79. Makay Elemer, Barrett James A. Changes In Hydraulic Component Geometries Increase Power Plant Availability 1984, Proceedings of 1st International Pump Users Symposium, Texas A&M University.
80. Goulds Pumps, Inc. PRIME I Pump Reliability Improvement Seminar 1987.
81. Exxon Chemical Americas Escoweld Epoxy Grouts 1981, Sales Bulletin OFCK81-1500.
82. Bloch H.P., Geitner F.K. Machinery Component Maintenance and Repair 1990, Gulf Publishing Company, Houston, Texas. 2nd ed.
83. Piotrowski John The Importance of Shaft Alignment-Answers to Pressing Questions. P/PM Technology September/October, 1989.
84. Bloch H.P. Improving Machinery Reliability 1988, Gulf Publishing Company, Houston, Texas. 2nd ed.
85. Cantley R.E. The Effect of Water in Lubricating Oil on Bearing Fatigue Life. ASLE Transactions 1977, 20(3):244-248.
86. Bloch H.P. Better Bearing Housing Seals Prevent Costly Machinery Failures March 24 & 25, 1993, Proceedings of Industrial Energy Technology Conference, Houston, Texas.
87. CR Industries, Elgin, Illinois; Form 457466, CR Technical Report.
88. ; also Magtecta marketing bulletins, Rotherham, UK, and Rockford, TN. http://www.AESSEAL.com.
89. Bloch H.P. Reducing Pump Oil Degradation. Hydrocarbon Processing December 1991, 25.
90. Bloch H.P. Oil Mist Lubrication Handbook 1987, Gulf Publishing Company, Texas, Houston.
91. Bloch H.P. Eliminating Cooling Water from General Purpose Pumps and Drivers. Hydrocarbon Processing January 1977.
92. National Fire Protection Association, "Centrifugal Fire Pumps 1976, " ANSI Z277.1-1976, pp. 20/108-109.
93. Sum C. A Practical Guide to Compressor Valves, The IIC Group of Companies 1982, 364 Supertest Rd, Downsview, (Toronto), Ontario, Canada, p. 8.
94. Blue A.B. Internal Combustion Engine Failures: A Statistical Analysis. ASME Publication 75-DGP-16 1975, 2-4.
95. Handbook of Loss Prevention 1978, Allianz Versicherungs-AG, Springer Publishing, Berlin, p. 137-140.
96. Bloch Heinz P., Budris Allan Pump User's Handbook 2009, Life Extension, The Fairmont Press, Lisburn, GA, 30047. 3rd ed.
97. Bloch Heinz P. Pump Wisdom: Problem Solving for Operators and Specialists 2011, John Wiley & Sons, New York, NY.
98. Bloch Heinz P., Allan R. Budris; Pump User's Handbook 2006, Fairmont Press, Lilburn, GA, ISBN 0-88173-517-5. 2nd ed.
99. Bloch Heinz P. Pump Wisdom: Problem Solving for Operators and Specialists 2011, John Wiley & Sons, Hoboken, NJ, ISBN 978-1-118-04123-9.
100. Barringer, Paul. API Pump Curve Practices and Effects on Pump Life from Variability About BEP. Weibull Analysis Course (see also Ref. 1, pg. 621).
101. ASA S2/WG88 Standard for Measurement and Evaluation of Machine Tool Vibration. Draft 04/27/93.
102. Barclay J. Keep Your Uptime Up: Condition Monitoring. Engineer's Digest March 1991.
103. Berry J. Tracking of Rolling Element Bearing Failure Stages Using Vibration Signature Analysis 1992, Technical Associates of Charlotte, Charlotte.
104. Buscarello R., Kruger Wm. Machinery Vibration Control: A Manager's Approach 1990, Update International, Atlanta.
105. Berryman F., Michie P., Smulders A., Vermeiren K. Condition Monitoring-A New Approach 1989, SKF Engineering and Research Centre, Nieuwegein, The Netherlands.
106. Dunnegan, Hartman Advances in Acoustic Emission 1981, Dunhart Publishers, Knoxville.
107. Manager's Approach-Going Beyond the Limits, Predictive Maintenance Technology National Conference, Atlanta.
108. Jackson C. The Practical Vibration Primer 1979, Gulf Publishing Company, Houston.
109. James R. Directions in Predictive Maintenance 1991, Cincinnati.
110. Jones R. Bearing Analysis Using Enveloping. SKF Report February 1992.
111. Jones R. Monitoring Electric Motors Using Electronic Data Collectors. Vibrations December 1990, 6.
112. Jones R. Acoustical Determination of Nuclear Valve Operation. TVA report July 1989.
113. Jones R. TVA Annual Maintenance Report 1988, Chattanooga, TN.
114. Kryter R., Haynes H. How to Monitor Motor-Driven Machinery by Analyzing Motor Current. Power Engineering October 1989.
115. Mitchell J. Machinery Analysis and Monitoring 1981, PennWell Publishing Company, Tulsa.
116. Corporation Wavetek Machinery Vibration Diagnostic Guide. Application Note 1984, 22.
117. Zierau S. Machinery Vibration Spectrum Analysis: A Blend of Problem Solving and Advancement of Diagnostic Know-How April 1976, Petrotech Maintenance Symposium, Amsterdam (Netherlands).
118. Edwards B. Drawing on the Right Side of the Brain 1979, Houghton-Mifflin Co., Boston.
119. Stein M.I. Stimulating Creativity, Volume 1: Individual Procedures, Volume 2: Group Procedures 1974-5, Academic Press, New York.
120. Gallwey W.T. The Inner Game of Tennis 1974, Random House, New York.
121. The Journal of Creative Behavior, Buffalo, New York: The Creative Education Foundation.
122. Parnes S.J. Guide to Creative Action 1977, Charles Scribner's Sons, New York.
123. Parnes S.J. This Magic of Your Mind 1981, The Creative Education Foundation, Inc., Buffalo, NY.
124. Grothus H. Total Preventive Maintenance 1975, Course Notes by F.K. Geitner, Toronto, Ontario.
125. Karassik I.J. Flow Recirculation in Centrifugal Pumps: From Theory to Practice. Power and Fluids 1982, 8(2).
126. Grothus H. Die Total Vorbeugende Instandhaltung 1974, Grothus Verlag, Dorsten, W. Germany, pp. 63-66.
127. Jardine A.K.S. Maintenance, Replacement, and Reliability 1973, Pitman Publishing, Bath, U.K, pp. 13-24.
128. Oil Refinery Fire and Explosion October 2005, 2004-08-I-NM, U.S. Chemical Safety and Hazard Investigation Board.
129. Safe Ups and Downs 1960, (booklet), Standard Oil Company. 1st ed.
130. The Report of the BP U.S. Refineries Independent Safety Review Panel January 2007.
131. Risk Based Inspection (RBI) Base Resource Document May 2000, API Publication 581. 1st ed.
132. OSHA National Emphasis Program Directive June 7, 2007, CPL 03-00-004, (accessed December 26, 2010). http://www.osha.gov/.
133. Refining Capacity Report, January 1, 2009 August 2009, National Petrochemical & Refiners Association.
134. Bloch Heinz P. Understanding Canned Motor Pumps. Lubrication Management and Technology September/October 2008.
135. Heinz Bloch P. Pump Statistics Should Shape Strategies. Maintenance Technology October 2008.
136. Layer of Protection Analysis Simplified Risk Assessment 2001, Center for Chemical Process Safety (CCPS) of the American Institute of Chemical Engineers.
137. OREDA Offshore Reliability Data 2002, SINTEF. 4th and earlier ed.
138. HSE "Offshore Hydrocarbon Releases Statistics and Analysis, 2002 2003, HSR 2002 02.
139. Mannan Sam Lees' Loss Prevention in the Process Industries 2005, 3rd ed.
140. Cox A.W., Lees F.P., Ang M.L. Classification of Hazardous Locations 1990, Institute of Chemical Engineers.
141. White Rose DA Volume 5 Part Two (Concept Safety Analysis) July 2000, DNV (for DTI in UK).
142. HSE Offshore Technology Report - OTO 1999 079 January 2000.
143. Spouge J. New Generic Leak Frequencies for Process Equipment. Process Safety Progress December 2005, 24(4).
144. Guidelines for Quantitative Risk Assessment Purple Book 1999, CPR18E, SDU, Committee for the Prevention of Disasters (CPR), The Hague.
145. Flemish Government, LNE Department Handbook Failure Frequencies 2009 for drawing up a Safety Report May 5, 2009.
146. Bloch Heinz P., Geitner F.K. Machinery Failure Analysis and Troubleshooting 1999, 2.
147. Schiavello Bruno Cavitation and Recirculation Troubleshooting Methodology. Proceedings of the 10th International Pump Users Symposium 1993.
148. Bickford J.H. An Introduction to the Design and Behavior of Bolted Joints 1981, From reference No.1, Marcel Dekker, NY, NY.
149. Karassik I.J. Centrifugal Pump Clinic. Chemical Processing September 1988, p 122-8.
150. Bloch H.P. Improving Machinery Reliability 1988, Gulf Publishing Company, Houston, Texas. 2nd ed.
151. SKF America, Inc., General Catalog, Form 4000US, King of Prussia, Pennsylvania; 1991.
152. Bloch H.P., Budris Allan Pump User's Handbook: Life Extension 2010, Fairmont Press, Lilburn, GA 30047, ISBN 0-88173-627-9. 3rd ed.
153. Bloch H.P. Pump Wisdom: Problem Solving for Operators and Specialists 2011, John Wiley & Sons, Hoboken, NJ, ISBN 9-781118-041239.
154. Bloch H.P. Power End Upgrades Will Avoid Pump Failures. Proceedings of the Twenty-Seventh International Pump Users Symposium, Texas September 2011, A&M University, Houston TX.
155. Prinyayogavipulya Luang Concise Principles of Buddhism 1957, 2nd ed.
156. Vincent Ryan Ruggiero Beyond Feelings A Guide to Critical Thinking 2004, McGraw-Hill, p. 112. 7th ed.
157. Stanford Encyclopedia of Philosophy, "Causal Processes." Dec. 8, 1996 and updated Sept. 10, 2007.
158. Bourke Vernon J. The Pocket Aquinas 1960, Washington Square Press, p. 67.
159. Wilson Paul F., Dell Larry D., Gaylord Anderson F. Root Cause Analysis - A Tool for Total Quality Management. Quality Press 1993, 187.
160. Wilson Paul F., Larry Dell D., Gaylord Anderson F. Root Cause Analysis - A Tool for Total Quality Management. Quality Press 1993, 48.
161. Kyokai Bukkyo Dendo The Teaching of Buddha 1966, Society for the Promotion of Buddhism, p. 54. 202nd revised ed.
162. Boukendour Said, Brissaud Daniel A Phenomenological Taxonomy for Systemizing Knowledge on Nonconformances. Quality Management Journal 2005, 12(2).
163. Vernon Bourke J. The Pocket Aquinas 1960, Washington Square Press, p. 67.
164. Chapnick P. What is Artificial Intelligence. AI Expert 1987, 2(10):5.
165. Harmon P., et al. Expert Systems Tools and Applications 1988, John Wiley & Sons, New York.
166. Musgrove J.G., Di Domenico P.N. Expert System-Operator Advisor for Particulate Control Equipment 1988, ASME, New York.
167. Eisen D.M., von Konigslow R. Predictive Control Systems for Plant Operations. Engrg. Dimensions; Toronto 1990.
168. Finn G.A., Reinschmidt K.F. Experts Systems in Operation and Maintenance. Chemical Engineering February 1990.
169. Lewis D.W., Sheth P.N. ROMEX-An Expert System Testbed for Turbomachinery Diagnostics 1990, Proceedings of the 19th Turbomachinery Symposium, Dallas.
170. Antinoja R., Di Domenico P., Joyce M., Musgrove J. Identification and Selection of Expert System Application 1988, ASME, New York.
171. Bloch H.P. Machinery Documentation Requirements For Process Plants Nov. 1981, ASME Paper 81-WA/Mgt-2, presented in Washington D.C.
172. Sangerhausen C.R. Mechanical Seals In Light Hydrocarbon Service: Design and Commissioning of Installations For Reliability September 14-16, 1980, paper presented at ASME Petroleum Mechanical Engineering Conference, Denver, Colorado.
173. SKF Bearing Company, Engineering Data Manual, Kulpsville, Pennsylvania.
174. James R. Pump Maintenance. Chemical Engineering Progress Feb. 1976, 35-40.
175. Taylor I. The Most Persistent Pump-Application Problem For Petroleum and Power Engineers September 1977, ASME Paper No. 77-Pet 5, presented in Houston.
176. Nelson W.E. Pump Curves Can Be Deceptive. Proceedings of NPRA Refinery and Petrochemical Plant Engineering Conference 1980, 141-150.
177. Eeds J.M., Ingram J.H., Moses S.T. Mechanical Seal Applications-A User's Viewpoint. Proceedings of the Sixth Turbomachinery Symposium 1977, 171-185. Texas A&M University.
178. Bush, Fraser, Karassik Coping With Pump Progress: The Sources and Solutions of Centrifugal Pump Pulsations, Surges and Vibrations. Pump World 1976, 2(1):13-19. (A publication of Worthington Group, McGraw-Edison Company).
179. McQueen R. Minimum Flow Requirements for Centrifugal Pumps. Pump World 1980, 6(2):10-15. (Ibid).
180. Bloch H.P. Improve Safety and Reliability of Pumps and Drivers. Hydrocarbon Processing January through May, 1977.
181. Bloch H.P. Optimized Lubrication of Antifriction Bearings for Centrifugal Pumps April 17, 1978, ASLE Paper No. 78-AM-1D-1, presented in Dearborn, Michigan.
182. Sprinker E.K., Patterson F.M. Experimental Investigation of Critical Submergence For Vortexing in a Vertical Cylindrical Tank June, 1969, ASME Paper 69-FE-49.
183. Bloch H.P. Mechanical Reliability Review of Centrifugal Pumps For Petrochemical Services September 20-23, 1981, Presented at the 1981 ASME Failure Prevention and Reliability Conference, Hartford, Connecticut.
184. Bussemaker, E. J., "Design Aspects of Baseplates For Oil and Petrochemical Industry Pumps, " IMechE (UK) Paper C45/81, Pages 135-141.
185. Karassik Igor J. So, You Are Short on NPSH? March, 1979, Presented at Pacific Energy Association Pump Workshop, Ventura, California.
186. Makay Elemer, Szamody Olaf Survey of Feed Pump Outages 1978, FP-754 Research Project 641 for Electric Power Research Institute, Palo Alto, Ca.
187. Fraser W.H. Flow Recirculation in Centrifugal Pumps. Proceedings of the Tenth Turbomachinery Symposium Dec. 1981, Texas A&M University, College Station, Texas.
188. Ingram J.H. Pump Reliability-Where Do You Start? September 13-15, 1981, Presented at ASME Petroleum Mechanical Engineering Workshop and Conference, Dallas, Texas.
189. Bloch H.P. Large Scale Application of Pure Oil Mist Lubrication In Petrochemical Plants August 18-21, 1980, ASME Paper 80-C2/Lub 25, Presented at Century 2 ASME/ASLE International Lubrication Conference, San Francisco, California.
190. Bloch H.P. Improving Machinery Reliability 1988, Gulf Publishing Company, Houston, Texas. 2nd ed.
191. Shah Rashmi K. Olefins Compressors. Reliability Performance-EPC Survey; 13thEthylene Producers Conference 2001, AIChE 2001 Spring National Meeting, Houston. Texas.
192. Solomon Associates Data. Dallas, Texas. 2001.
193. Weibull, Waloddi "A Statistical Distribution Function of Wide Applicability", ASME Journal Of Applied Mechanics September 1951, Transactions of the American Society Of Mechanical Engineers, pp. 293-297 followed by discussions of the paper in ASME Journal Of Applied Mechanics, June 1952, pp. 233-234. Other historical Weibull documents are available at. http://www.barringer1.com/wa.htm.
194. http://webstore.iec.ch/webstore/webstore.nsf/artnum/041794?opendocument.
195. Abernethy R.B. The New Weibull Handbook 2006, self published at. http://www.bobabernethy.com, 5th ed.
196. Benard A., Bos-Levenbach E.C. "Het uitzetten van waarnemingen op waarschijnlijkdeids-papire" ("The Plotting of Observations on Probability Paper"). Statististica Neerlandica 1952, 7:163-173. This translated paper is available at. http://www.barringer1.com/wa_files/The-plotting-of-observations-on-probability-paper.pdf.
197. Mischke C.R. A Distribution-Independent Plotting Rule for Ordered Failures September 10-12, 1979, an published paper presented at the ASME Design Engineering Technical Conference, Available at. http://www.barringer1.com/wa_files/Mischke-Plot-Position-1979.pdf.
198. SuperSMITH Weibull software is a product of Fulton Findings LLC, PO Box 6517, San Pedro, CA 90724 http://www.weibullnews.com.
199. http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19970025228_1997043322.pdf
200. http://www.barringer1.com/mil_files/MIL-HDBK-189.pdf.
201. http://webstore.iec.ch/webstore/webstore.nsf/artnum/031953?opendocument.
202. Barringer H. Paul, Predict Future Failures From Your Maintenance Records 2003, Maintenance Engineering Society of Australia (MESA). http://www.barringer1.com/pdf/PredictFutureFailures-Slides.pdf.