Seals and Sealing Handbook

Seals and Sealing Handbook

Volumn , Issue , 2007, Pages

  Flitney, Robert ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013730088     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-1-85617-461-9.X5000-3     Document Type: Book

References (205)

1. BS 1806. 'Specifícation for dimensions of toroidal sealing rings ("O"-rings) and their housings (inch series)'. British Standards Institution.
2. AS 568B, 'Aerospace size standard for O-rings', SAE.
3. ISO 16032-1, 'Aerospace fluid systems - O-rings, inch series: inside diameters and cross sections, tolerances and size-identification codes. Part 1: Close tolerances for hydraulic systems'. ISO 16032-2, 'Aerospace fluid system - O-rings, inch series: inside diameters and cross sections, tolerances and size-identification codes. Part 2: Standard tolerances for non-hydraulic systems'.
4. BS 4518, 'Specification for metric dimensions of toroidal sealing rings ("O"-rings) and their housings', British Standards Institution.
5. SMS 1588, 'Metric O-rings, installation dimensions', Swedish Standards Institute.
6. Peacock D. The effects of geometry on the compression set of elastomers. PhD Thesis 2002, Cranfield University.
7. BS 5106, 'Back-up-rings specification for dimensions of spiral anti-extrusion back-up rings and their housings', British Standards Institution.
8. AS 5782 Aerospace Standard, 'Retainer, backup ring, hydraulic, pneumatic, polytetrafluoroethylene, resin, uncut', SAE.
9. Ho E. 'Increased confidence in sealing system design using FEA simulations'. 16th Int. Conf. on Fluid Sealing 2000.
10. New technology simplifies seal production. Sealing Technology 2003, September 2003.
11. Pressure-indicating films now available as dots. Sealing Technology July 2003.
12. Gasket Technology, Understanding Gaskets and Dimensional Guidebook 2005, James Walker Moorflex.
13. Piringer S., Rustemeyer U. Improving performance of fibre-based gaskets at elevated temperatures-the sandwich approach. Sealing Technology March 2004.
14. Hoyes J. The development of an advanced, coreless and flexible, sheet sealing material by the use of an inorganic binder. 18th International Conference on Fluid Sealing 2005.
15. LeFrancois M. SETE April 2004, 'Metal-to-metal seals: the innovative route in static sealing'. Sealing Technology April 2004.
16. Thomas D.A., Woolfenden S. Biaxially orientated PTFE sheet sealing materials-further developments. 18th Int. Conf. on Fluid Sealing, BHR Group, 2005 and Sealing Technology November 2005.
17. Jones W.F., Seth B.B. Evaluation of asbestos free gasket materials. ASME/IEEE Power Generation Conference October 1990.
18. Jones W.F., Seth B.B. Replacing asbestos steam, path gaskets. Power Engineering March 1992.
19. Hoyes J. Gasket selection and developments in gasket technology. Design Maintenance and Care of Gasketed Bolted Joints Seminar, I.Mech.E. March 2006.
20. Kockelmann H. Harmonised gasket testing procedures - EN 13555:2004. Design Maintenance and Care of Gasketed Bolted Joints Seminar, I.Mech.E. March 2006.
21. Mueller R.T. Inward buckling of flexible graphite filled spiral wound gaskets for piping flanges. Sixth Annual Technical Symposium 1996.
22. Leaver G., Stewart I.W., Deans J.S. Containment aspects of couplings for biotechnology plant. Bio Safety Journal April 1995, Vol. 1. Paper 2.
23. Hygienic pipe couplings 1997, European Hygienic Equipment Design Group.
24. EN 1672-2:2005, 'Food processing machinery - basic concepts - Part 2: Hygiene requirements'.
25. Active material based seal assemblies and methods for varying seal force. General Motors 2005, Patent Number WO 2005/089186.
26. Guidelines for safe seal usage - flanges and gaskets. ESA 009/98 1998, European Sealing association.
27. Johnston D.E. Design aspects of modern rotary shaft seals. Proc. I. Mech. E. 1999, vol. 213. Part J.
28. Jagger E.T. Rotary shaft seals: the sealing mechanism of synthetic rubber lip seals running at atmospheric pressure. Proc. I. Mech. E. 1957, vol. 171.
29. R.F.Salant Theory of lubrication of elastomeric rotary shaft seals. Proc. I. Mech. E 1999, Vol. 213. Part J.
30. R.F. Salant, Private communication, July 2005.
31. Kunstfeld T., Haas W. Shaft surface manufacturing methods for rotary shaft lip seals. Sealing Technology July 2005.
32. Horve L.A. A macroscopic view of the sealing phenomenon for radial lip oil seals. 11th Int. Conf. on Fluid Sealing 1987.
33. Anon Simrit 2005, catalogue.
34. Horve L.A. The correlation of rotary shaft radial lip seal service reliability and pumping ability to weartrack roughness and microasperity formation. SEA910530 February 1991.
35. Embury P., Armour J. Influence of elastomer compound design on the performance of rotary shaft lip seals. Sealing Technology August 2004.
36. Duhring B., Iverson G. The application of plastics in dynamic seals. Proc. I. Mech. E 1999, Vol. 213. Part J.
37. Salant R.F. Grease lubrication, bearing seals. Seal Technology: Principles & Application 2004, Georgia Institute of Technology Short Course.
38. Medri G., Strozzi A., Bras J., Gabelli A. Mechanical behaviour of two elastomeric seals for bearing units. 10th Int. Conf. on Fluid Sealing 1987.
39. Kim, Jun Contact forces of lip seals for ball bearings. Tribology International 1994, Vol. 27:393-400.
40. SKF Bearing 2006, http://www.skf.com.
41. Rotary Seals 2004.
42. Bock E., Vogt R., Schreiner P. New radial shaft seal concepts for sealing hydraulic pups and motors. Sealing Technology November 2003, (First published in German at the 12th International Sealing Conference, VDMA, October 2002).
43. Lip type stern tube seals 2006, http://www.wart.sila.com.
44. Fazekas G.A. Helical O-ring seal. Invention Disclosure 6827 1957, American machine and Foundary Co.
45. Denny D.F. The lubrication of fluid seals. Conference on Lubrication and Wear I. Mech. E. 1957.
46. Kalsi M.S. Development of a new high pressure rotary seal for abrasive environments. 12th Int. Conf. on Fluid Sealing 1989.
47. Kalsi Seals Handbook, Kalsi Engineering 2005, http://www.kalsi.com/Rotary_Seal_Literature.htm.
48. Bauer F., Haas W. PTFE lip seals with spiral groove-the penetration behaviour, hydrodynamic flow and back pumpingmechanisms. 18th Int. Conf. on Fluid Sealing 2005.
49. Second generation PTFE engine oil seal offers space and cost saving. Sealing Technology February 2005.
50. Watson S., Nau B.S. Analysis of a novel rotary seal. 11th Int. Conf. on Fluid Sealing 1987.
51. Lebek A. Principels and Design of Mechanical Face Seals 1991, Wiley-Intersccience, New York.
52. Nau B.S. Hydrodynamic lubrication in face seals. Third Int. Conf. on Fluid Sealing 1967.
53. Field G.J., Flitney R.K. Diesel engine water pump seal investigations. BHR Group Report RR 1293 1975.
54. Water pump seal compensates for vibrations. Sealing Technology October 2005.
55. Flitney R.K., Nau B.S. The effects of misalignment on mechanical seal performance. 15th Int. Conf. on Fluid Sealing 1997.
56. Barnes N.D., Flitney R.K., Nau B.S. Slurry seal investigation. BHR Group Report CR6376 1994.
57. Smith R.A. Introduction to sealing mexers in the pharmaceutical and biotech industries. 21st Int. Pump Users Symposium, Texas A&M, 2004 and Sealing Technology September 2004.
58. Goetze Mechanical Seals 2005, FTl Seals Technology, Brochure.
59. Stahley J.S. Dry Gas Seals Handbook 2005, Pennwell.
60. Mayer E. High duty mechanical seals for nuclear power station. Fifth Int. Conf. on Fluid Sealing 1971.
61. Iny E.H. The design of hydrodynamically lubricated seals with predictable operating characteristics. Fifth Int. Conf. on Fluid Sealing 1971.
62. Young L., Roosch E., Hill R. Enhanced mechanical face seal performance using modified face topography. 17th Int. Conf. on Fluid Sealing 2003.
63. Flitney R.K., Nau B.S. Mechanical seal performance: procedure for the determination of temperature margin. BHRA Report TN3010 1989.
64. Morton J.L., Attard J., Evans J.G. Active lift seal technology impact on water injection services. 22nd Int. Pump Users Symposium 2005.
65. Heald J.M. The seal's environment-its housing. Seventh Int. Conf. on Fluid Sealing 1975.
66. Barnes N.D., et al. Mechanical seal housing optimisation study. BHR Group Report CR3005 1988.
67. Barnes N.D., et al. Mechanical seal housing optimisation study. BHR Group Report CR6125 1992.
68. Williams M., Barnes N.D. Flow visualisation experiments on housing grade 2 (ISO 3069 Revision). BHR Group report CR6196 1993.
69. Williams M., et al. Seal housing design evaluation. BHR Group Report CR6378 1995.
70. Azibert H., Clark R. Using CFD to improve performance and extend life of mechanical seals in slurry applications. 17th Int. Conf. on Fluid Sealing 2003.
71. ISO 21049 and API 682. 'Pumps- Shaft sealing systems for centrifugal and rotary pumps'.
72. New pump design to improve seallife. Sealing Technology July 2005.
73. Bowden P.E., Fone C. Containment sealing and the new API 682 standard. 17th Int. Conf. on Fluid Sealing, BHR Group 2003.
74. Mathewson D. Advanced mechanical seals for PWR reactor coolant pumps. Advanced topics and Technical Solutions in Dynamic Sealing 2005, Poitiers University.
75. Fuse T., Shimzu T., Nishiyama K. Development of highly reliable mechanical seal for nuclear power plant. 17th Int. Conf. on Fluid Sealing 2003.
76. Excellence in environmental protection awards from the FSA. Sealing Technology January 2006.
77. Millar T.R. The application of an angled face, large diameter, seal to a reversible pump-turbine shaft. Fifth Int. Conf. on Fluid Sealing 1971.
78. API 617 'Axial and centrifugal compressors and expander-compressors for petroleum, chemical and gas industry services 2003.
79. A guide to sealing hydrocarbon processing for low emissions 2005, AESseal plc.
80. Summers-Smith J.D. Mechanical Seal Practice for Improved Performance 1992, Mechaical Engineering Publichations Ltd. I.Mech.E, London. 2nd ed.
81. Design of mechanical seals for hygienic and aseptic applications. Document 25 2002, European Hygienic Equipment Design Group, Belgium.
82. Denny D.F. Tests onpacked glands for rotary shafts. BHR Group Report RR487 1953.
83. Supagraf control helps valves to meet latest regulations. Sealing Technology February 2006.
84. Training video 2001, James Walker.
85. Austin R.M., Fisher M.J. An investigation of methods of packing stuffing box seals for rotary shafts. BHR Group Report RR741 1962.
86. Pugliese F. Valve live loadingusing Belleville springs 2001, Solon Manufacturing Company.
87. Staaf E. A review of the properties of expanded graphite and selected forms of PTEE as an alternative in the sealing role. Eighth Int. Conf. on Fluid Sealing 1978.
88. Flitney R.K. Packing material alternatives. BHR group Reports RR1771 and RR1772 1981.
89. Harrison D., et al. Evaluation of graphite valve packings to reduce fugitive emissions on hydrocarbon duties. First European Conference on Controlling Fugitive Emissions from Valves, Pumps and Flanges 1995.
90. Leefe S.E., Davies O.M. Laboratory based test for valve stem leakage correlation between test and working fluids. First European Conference on Controlling Fugitive emissions from Valves, Pumps and Flanges 1995.
91. Valve stem leak-tightness test methodologies. EOR 19772 EN 2000, European Commission.
92. Leefe S.E. SMT project on valve emission measurement methods. Second European Fugitive Emissions Conference 1998, VDI Verlag.
93. Boyson S. Control valve packing technology optimizing friction sealability and repeatability. Valve World 2004, KCI World.
94. Jeffries A., Edwin-Scott C. Making a practical difference to site fugitive emissions. 18th Int. Conf. on Fluid Sealing 2005.
95. Bartholdi R. The development of a new packing geometry. Valve World 2004, KCI World.
96. Valve packing tests leakage measurement equipment sensitivity. Sealing Technology October 2003.
97. Birembaut Y., et al. Measurement of fugitive emissions: the different methods applied to industrial valves. 2nd European Fugitive Emissions Conference 1998, VDI Verlag.
98. Velde R.van der Industrial solutions to stop valve emissions. First European Conference on Controlling Fugitive Emissions from Valves, Pumps and Flanges 1995.
99. Emission measurement creates animated discussion. Sealing Technology January 2005.
100. Reynolds J.A. Live loading-an economic solution. First European Conference on Controlling Fugitive Emissions from Valves, Pumps and Flanges 1995.
101. Nau B.S. Summary report: development of high reliability dynamic seals. BHR Group Report CR7599 1991.
102. Roddis A. Reducing moisture contamination in bearing lubrication. Sealing Technology February 2006.
103. Hoeting S. Protecting machine tool spindle bearings. Manufacturing Engineering July 2001.
104. Setco Airshield 2006, Setco Sales Co.
105. Komotori K., Mori H. Leakage characteristics of labyrinth seals. Fifth Int. Conf. on Fluid Sealing 1971.
106. Picardo A., Childs D. Rotordynamic coefficients for teeth on stator labyrinth seals at 70 bar supply pressure-measurements versus theory and comparison to honeycomb seal. ASMEIGTI Conference 2004.
107. Childs D.W. Recent advances in the rotordynamic behaviour of gas seals. Advanced Topics and Technical Solutions in Dynamic Sealing, EDF/LMS Workshop October 2005.
108. Dowson P., Walker M.S., Watson A.P. Development of abradable and rub-tolerant seal materials for application in centrifugal compressors and steam turbines. Proceedings of the 33rd Turbomachinery Symposium 2004, Republished in.
109. Sealing Technology December 2004.
110. Benckert H., Wachter J. Flow induced spring constants of labyrinth seals. Second Int. Conf. Vibrations in Rotating Machinery 1980, I. Mech. E., UK.
111. Romero F. New seals solve vibration problem. Sulzer Technical Review 2005.
112. Smarsly W., et al. Advanced high temperature turbine seals materials and designs. Eighth International Conference on Mulitfunctional and Functionally Graded Materials 2004.
113. 'Hybrid abradable labyrinth damper seal', Elliott Co., WO 2004/113771.
114. Delgardo A., et al. Measurements of leakage, structural stiffness and energy dissipation parameters in a shoed brush seal. Sealing Technology December 2005.
115. Patent Nos: WO 2005/103534, 103535 and 103536, Alstom Technology Ltd.
116. Patent No.: WO 2004/088180, Rolls Royce plc.
117. Braun M.J., et al. A three dimensional analysis and simulation of flow temperature and pressure patterns in a passive adaptive compliant finger seal. Advanced Topics and Technical Solutions in Dynamic Sealing. EDF/LMS Workshop October 2005.
118. Chupp R.E., Nelson P. Evaluation of brush seals for limited life engines. AIAA/SAE/SAME/ASEE, 26 Joint Propulsion Conf. 1990.
119. Stair W.K., Hale R.H. The turbulent viscoseal-theory and experiment. Third Int. Conf. on Fluid Sealing 1967.
120. Zuk J., Reinkel H.E. Numerical solutions for the flow and pressure fields in an idealized spiral groove pumping seal. Fourth Int. Conf. on Fluid Sealing 1969.
121. Flitney R.K., Nau B.S. Design and testing of an integrated viscoseal and mechanical seal. BHRA Report RR1203 1973.
122. Yu-ming W. Some experimental investigations about seal breakdown and gas ingestion in viscoseals. 10th Int. Conf. on Fluid Sealing 1984.
123. Bussemaker E.J., Hirs G.G. Viscoseals for free surface sodium pumps. Fifth Int. Conf. on Fluid Sealing 1971.
124. Crease A.B. Windback seals-a simple theory and design method and the main practical limitations. Seventh Int. Conf. on Fluid Sealing, BHRA Fluid Engineering 1975.
125. Rothberg S.B. Centrifugal force keeps fluid in groove liquid shaft seals. Production Engineering November 1963.
126. Thew M.T., Saunders M.G. The hydrodynamic disc seal. Third Int. Conf. on Fluid Sealing 1967.
127. Thew M.T. Further experiments on the hydrodynamic disc seal. Fourth Int. Conf. on Fluid Sealing 1969.
128. Zaman N. Dynamic seals lower life costs of wastewater pumps. Sealing Technology August 2004.
129. White C.M., Denny D.F. The sealing mechanism of flexible packings. Ministry of Supply Technical Memorandum No. 3/47 1948, Republished by BHRA, 1972, HMSO.
130. Field G.J., Nau B.S. Film thickness and friction measurements of a rectangular section rubber seal ring. Sixth Int. Conf. on Fluid Sealing 1973.
131. Field G.J., Flitney R.K., Nau B.S. The lubrication of reciprocating rubber seals: U-seal tests. BHRA Report RR1315 1975.
132. Austin R.M., Flitney R.K., Nau B.S. Research into factors affecting reciprocating rubber seal performance. BHRA Report 1449 1977.
133. Wernecke P.W. Analysis of the reciprocating sealing process. 11th Int. Conf. on Fluid Sealing 1987.
134. Flitney R.K., Hansford I., Nau B.S. The effect of surface texture on reciprocating seal performance. BHR Group Report CR 3069 1989.
135. Peppiatt N.A. The influence of the cylinder tube surface finish on reciprocating seal performance. 13th Int. Sealing Conference 2004.
136. Nau B.S., Field G.J. Interseal pressure of piston seals in thin-walled jacks. BHRA Report RR1088 1971.
137. Peppiatt N.A. The influence of the rod wiper on the leakage from a hydraulic cylinder gland. Sealing Technology December 2003.
138. Jordan H. PTFE rod seal with high pressure relief technology. 13th Int. Sealing Conference 2004.
139. Flitney R.K. International O-ring standards: where are they?. Sealing Technology October 2003.
140. Tatseishi Y. Tribological issues in reducing piston ring friction issues. Tribology International 1994.
141. Engineers Handbook of Piston Rings, Koppers Inc.
142. Lancaster J.K. Accelerated wear testing of PTFE composite bearing materials. Journal of Lubrication Tribology April 1979.
143. Lancaster J.K. Abrasive wear of polymers. Wear October 1969.
144. Schubert R. The influence of a gas atmosphere and its moisture content on sliding wear in PTFE compositions. Lubrication Technology April 1971.
145. Wilson R.S. Developments in piston and rod sealing materials for dry gas compressors. Fluid Machinery Congress 1990, I.Mech.E.
146. Wilson R.S. Advances in piston and packing ring materials for oil-free compressors. Fourth Workshop on Piston Compressors, Kötter Consulting Engineers October 2000.
147. 'Thermally applied coating for piston rings, consisting of mechanically alloyed powders', Federal-Mogul Burscheid, Patent No. WO 2002/024970.
148. 'Wear protection layer for piston rings, containing wolfram carbide and chromium carbide', Federal-Mogul Burscheid, Patent No. WO 2002/048422.
149. Esser J., Hoppe S., Linde R., Münchow F. Compression piston rings in gasoline and diesel engines-current engineering practice and outlook. MTZ July 2005.
150. Radcliffe C. Sealing material developments for reciprocating gas compressors. 18th Int. Conf. on Fluid Sealing, BHR Group, 2005 and Sealing Technology November 2005.
151. Edmond K., Newland C., Monaghan K.J. MODES Final material test data report. BHR Group Report CR 7773 2005.
152. Seal material/fluid compatibility for fluid power applications. BFPA Document P/81 1998, British Fluid Power Association, Bicester, UK.
153. Flitney R.K., Nau B.S. Elastomer seals in a steam buffered process valve. Ninth Int. Conf. on Fluid Sealing 1981.
154. George A.F. Guidance for the selection, assurance, procurement, storage and installation of elastomer seals for nuclear plant applications. British Energy Engineering Specification TGN 005 2005, British Energy.
155. Ho E. Summary for seal life test procedures. BHR Group, CR 6819 June 1998.
156. Aston M.W., Fletcher W., Morrell S.H. Sealing force of rubber seals and its measurement. Fourth Int. Conf. on Fluid Sealing 1969.
157. Ho E., Nau B.S. Elastomer seal life prediction. 14th Int. Conf. on Fluid Sealing 1994.
158. Cameron Elastomer Technology Inc. Improved life prediction techniques for offshore marine elastomeric sealing elements. Paper OTC006130, Offshore Technology Conference 1989.
159. Duarte J., Achenbach M. A finite element methodology to predict age-related mechanical properties and performance changes in elastomeric seals. 12th Int. Sealing Conf. 2002.
160. Flitney R.K. Extending the application of fluorosilicone elastomers. Sealing Technology February 2005.
161. Campion R.P., Morgan G.J. High pressure permeation and diffusion of gases in polymers of different structures. Journal for Plastics Rubber and Composites: Processing and Applications 1992, 17(No. 1).
162. Monaghan K.J., Newlands C., Ho E. Specification of elastomeric materials for rapid gas decompression applications. Oilfield Engineering with Polymers 2006 March 2006, RAPRA, MERL.
163. Ho E. Sealing electronic equipment casings. Sealing Technology September 2003.
164. Ho E., Edmond K., Peacock D. Effect of temperature and pressure on permeation, ageing and emissions of elastomers. Sealing Technology October 2002.
165. Jagels S., Arrigoni S. The role of base resistant FKM technology in oilfield seals. Oilfield Engineering with Polymers 2006 March 2006, RAPRA, MERL.
166. FSRs in extreme applications 2006, Dow Corning Corp.
167. 'Kalrez seal design guide', DuPont Performance Elastomers.
168. http://www.dupontelastomers.com.
169. Hobson R.M., Flitney R.K., Nau B.S. Effects of operational factors on reciprocating polymeric seals for fluid power. BHR Group Report CR 6221 1994.
170. Flitney R.K., Nau B.S. The effect of surface texture on reciprocating seal performance. BHR Group Reports CR 3068 and CR 3069 1989.
171. Nau B.S. Mechanical seal material performance. BHR Group Report CR 3009 1988.
172. Nau B.S. Mechanical seal face materials. Proc. I. Mech. E. 1997, 211:165-183.
173. Flitney R.K., Nau B.S. A study of factors affecting mechanical seal performance. Proc. I. Mech. E. 1986, Vol. 200(No. 107).
174. Clarke W.T., Lancaster J.K. Breakdown and surface fatigue of carbon during repeated sliding. Wear 1963, 6.
175. Lancaster J.K. Transition in the friction and wear of carbons and graphite's sliding against themselves. ASLE Trans. 1975, 18.
176. Flitney R.K., Nau B.S. The effects of misalignment on mechanical seal performance. 15th Int. Conf. on Fluid Sealing 1997.
177. http://www.matweb.com.
178. Heubner M. Material selection for mechanical seals. Proc. 22nd Int. Pump Users Symposium 2005.
179. ISO 21049/API682, 2004 'Pumps-Shaftsealing systems for centrifugal and rotary pumps'.
180. Elastomeric seals for rapid gas decompression applications in high pressure service: guidelines. Health and Safety Executive 2006, BHR Group.
181. Embury P. High-pressure gas testing of elastomer seals and a practical approach to designing for explosive decompression service. Sealing Technology June 2004.
182. Edmond K. Elastomer fatigue testing for explosive decompression cycling prediction. 17th Int Conf. on Fluid Sealing 2003.
183. High pressure high temperature developments in the United Kingdom continental shelf. Report Number RR409 2005, Health and Safety Executive, UK.
184. McQuillan K.W., Milne G., Smith G. A leak-free start up: fantasy or reality. Sealing Technology July 2003.
185. 'What if - your O-ring seal looks like this?', Freudenberg Simrit.
186. 'Sealing system leakage and analysis guide', Technical Bulletin, Oil Seal Subdivision, Rubber Manufacturers association, USA.
187. 'Causes of failure, damage patterns, handling and assembly of Simmerrings', Freudenberg Simrit.
188. Plumridge J.M., Page R.L. The development of more tolerant mechanical seals. Shaft Sealing in Centrifugal Pumps, Seminar February 1992, I. Mech. E.
189. Moore S. Seals - problems and solutions. Seals and Sealing Today, Seminar December 2005, I. Mech. E.
190. Shiels S. Which is worse, specifying too much head or too much flow?. Stan Shiels on Centrifugal Pumps 2004, Elsevier.
191. Bachus L., Custodio A. Know and Understand Centrifugal Pumps 2003, Elsevier.
192. Harrison D., Watkins R. Evaluation of Forties main oil line pump seals. 10th Int. Conf. on Fluid Sealing 1984.
193. Woodley B.J. Failure diagnosis. Mechanical Seal Practice for Improved Performance 1992, I. Mech. E.
194. Young L., Roosch E., Hill R. Enhanced mechanical face seal performance using modified face surface topography. 17th Int. Conf. on Fluid Sealing 2003.
195. Morton J.L., Attard J., Evans J.G. Active lift seal technology impact on water injection services. 22nd Int. Pump Users Symposium 2005.
196. Flitney R.K. Excellence in environmental protection awards. Sealing Technology January 2006.
197. Excellence in environmental protection. Sealing Technology April 2004.
198. New pump design to improve seallife. Sealing Technology July 2005.
199. Hydrocarbon release - dry gas seal integrity survey survey report. Offshore Technology Report 2000/070 2000, Health and Safety Executive, UK.
200. Marsh G. Dry gasseal system reliability, a seal manufactures's viewpoint. Reliability of Rotating Machinery Sealing Systems Seminar October 1999, I. Mech. E.
201. Stahley J.S. Dry Gas Seals Handbook 2005, Penn Well Corp.
202. Merkel Hydraulic Seals, Technical Principles 2005, Freudenberg Simrit.
203. Peppiatt N.A. Reciprocating seals for hydraulic cylinders. Seals and Sealing Today, Seminar December 2005, I. Mech. E.
204. Sealing Handbook 1999, Parker Seals, Parker Hannifin GmbH.
205. Sealing systems for fluid power applications. Training Material 2005, VDMA.