Current aspects of computer modelling thermal and deformation stresses and structure formation in welding and related technologies

Welding International

Volumn 13, Issue 4, 1999, Pages 314-322

  Kiselev, S N ^a   Kiselev, A S ^b   Kurkin, A S ^c   Aladinskii, V V ^d   Makhanev, V O ^d  

^a MGUPS Institute   (Russian Federation)

^b Kurchatovskii Institute   (Russian Federation)

^c BAUMAN MOSCOW STATE TECHNICAL UNIVERSITY   (Russian Federation)

^d Central Scientific Research Institute of Heavy Engineering   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85011248505     PISSN: 09507116     EISSN: 17542138     Source Type: Journal    
DOI: 10.1080/09507119909447387     Document Type: Article

References (97)

1. Vinokurov V A and Grigor'yants A G: Theory of welding strains and stresses’. Publ Mashinostroenie, Moscow, 1984.
2. Prokhorov N N: ‘Solidification cracking resistance of welded joints in solidification’. Publ Metallurgiya, Moscow, 1979.
3. Volchenko V N et al: ‘Theory of welding processes’. Publ Vysshaya Shkola, Moscow, 1988.
4. Karzov G P et al: ‘Physico-mechanical modelling of the fracture processes’. Publ Politekhnika, St Petersburg, 1993.
5. Hibbit H and Marcal P: ‘A numerical thermo-mechanical model for the welding and subsequent loading of a fabricated structure’. Computers and Structures 1973 3 (5) 1145-1174.
6. Mahin K et al: ‘Prediction and measurement of residual elastic strain distributions in gas tungsten arc welds’. Welding Journal 1991 70 (9) 245s-260s.
7. Ueda Y and Murakawa H: ‘New trends of research on mechanics in welding and fabrication in Japan’. Trans of JWRI 1993 22 (2) 189-200.
8. Ueda Y et al: ‘Application of FEM to theoretical analysis, measurement and prediction of welding residual stresses’. Trans of JWRI 1991 20(1)97-107.
9. Ueda Y et al: Three-dimensional numerical simulation of various thermo-mechanical processes by FEM’. 'Report IV’. Trans of JWRI 1993 22 (2) 289-294.
10. Gol'sshtein R V (ed): ‘Methods of boundary integral equations’. Publ Mir, Moscow, 1978.
11. Brebbiya K and Wocker S: ‘Using the method, of boundary elements in technology’. Publ Mir, Moscow, 1982.
12. Banerjee P and Butterfield R: ‘Method of boundary elements in technology’. Publ Mir, Moscow, 1982.
13. Postnov V A and Taranukha N A: The method of modulus-elements in calculating ship structures’. Publ Sudostroenie, Leningrad, 1990.
14. -Kiselev A S et al: ‘Possibilities of the method of superelements in calculating the residual stresses in butt welded joints in pipes for solving the problems of safe service (comparison of axisymmetry and three-dimensional solution systems)’. In: ‘Proc of the 2nd Int'l Conf: Safety of Pipelines’. 1997 1-12.
15. Kozdoba L A: ‘Methods of solving non-linear thermal conductivity problems’. Publ Nuaka, Moscow, 1975.
16. Pavlovich A A and Kurkin A S: ‘An algorithm for calculating non-stationary temperature fields in three components’. Izv Vuz No. 2, 102-106.
17. Argyris J et al: ‘Computational aspects of welding stress analysis’. Computational Methods in Applied Mechanics and Engineering 1982 33 635-666.
18. Brown S and Song H: ‘Implications of three-dimensional numerical simulations of welding of large structures’. Welding Journal 1992 71 (2) 55s-62s.
19. Leung C et al: ‘Finite element modelling of single-pass weld’. Welding Research Council Bulletin Series 1990 (356) 1-10.
20. Jonsson M et al: ‘Simulation of tack welding procedures in butt joint welding of plates’. Welding Journal 1985 64 (10) 296s-301s.
21. Karlsson R and Josefson B: Three-dimensional finite element analysis of temperatures and stresses in a single-pass, butt-welded pipe’. Trans ASM E Journal of Pressure Vessel Technology 1990 112 (1) 76-84.
22. Shim Y et al: ‘Determination of residual stresses in thick-section weldments’. Welding Journal 1992 71 (9) 305s-312s.
23. Gulick L: ‘Finite element welding computations using general purpose non-linear analysis codes’. ASME Pressure Vessel and Piping Div 1988 143 13-22.
24. Free J and Goff R: ‘Predicting residual stresses in multipass weldments with the finite element method’. Computers and Structures 1989 12 (2) 365-378.
25. Ueda Y et al: ‘Three-dimensional numerical simulation of various thermo-mechanical processes by FEM'.'Report 1’. TransofJWRI 1992 21 (2) 111-117.
26. Kiselev S N et al: ‘Effect of preheating all-rolled wagon wheels on residual stresses and strains’. Sear Proiz 1995 (12) 3-7.
27. Kiselev S N et al: ‘Analysis of the stress-strain state in circular welds in the frames underground wagons’. Sear Proiz 1993 (4) 19-20.
28. Pavlovich A A: ‘Development of the method of determining the stress-strain state in electroslag welding of plates’. Dissertation N E Bauman Moscow State Technical University, Moscow, 1987.
29. Aladinskii V V et al: ‘Development of the methods of determining welding stresses’. In: ‘Residual processing stresses, Proc of 2nd Nat Symp’. Publ Moscow, 1985, 28-31.
30. Aladinskii V V et al: ‘Examination of residual stresses in electroslag welding of plates’. In:'Processing residual stresses, Proc of 3rd Nat Symp’. Publ Moscow, 1988, 6-10.
31. Aladinskii V V and Pavlovich A A: ‘Improving the algorithm for solving non-isothermal elastoplastic problems by the finite element method with special reference to welding’. Manuscript No.296-MSh deposited at VINITI. Publ VNIITEMR, Moscow, 1987.
32. ‘Development of algorithms and programs for alternating temperature fields and the stress-strain state of standard welded joints for application in automatic systems of controlling heating and standards of energy requirements of the processes of local heating for welding’. Publ Central Scientific Research Institute of Heavy Engineering, Moscow, 1989.
33. Attinger R et al: ‘Residual stresses and stress corrosion effects in cast nuclear waste overpacks’. Nuclear Engineering and Design 1991 129 (1) 89-99.
34. Tsai C: ‘Using computers for the design of welded joints’. Welding Journal 1991 70(1)47-56.
35. Leung C and Pick R: ‘Finite element analysis of multipass welds’. Welding Research Council Bulletin Series 1990 (356) 11-33.
36. Karzov G P et al: ‘Calculation of fields of residual welding stresses in shell-type structures. Report 1’. Act Svarka 1992 (3) 3-8.
37. Aladinskii V V et al: ‘Professional software for modelling in the welding industry’. In: ‘Automatic production control systems and expert systems in welding’. Studies of Tula State Technical University, 1995, 32-36.
38. Kurkin A S and Kuselev A S: ‘Development of software for modelling the thermal-stress state of components and its application for increasing the quality of welded structures’. Tr M VTU N E Bauman 1988 (511) 89-105.
39. Nikolov D G et al:'Modelling of thermal sources in arc welding’. 5tar Proiz 1987 (6) 34-36.
40. Larinov V P et al: ‘A calculation method of examining the temperature field in multipass welding’. Avt Svarka 1981 (4) 16-18.
41. D'yakov Yu G and Karkhin V Ya: ‘Kinetics of strains and stresses in multipass welding bimetal plates’. Avt Svarka 1984 (8) 14-18.
42. Pardo E and Weckman D: ‘Prediction of molten pool and reinforcement dimensions of GMA welds using a finite-element model’. Metallurgical Trans 1989 20B (6) 937-947.
43. Goldak J et al: ‘A new finite element model for welding heat sources’. Metallurgical Trans. 1984 15B (6) 299-305.
44. Taran SI et al: ‘Selection of the temperature of preheating a rotor’. Svar Proiz 1991 (3) 9-11.
45. Zacharia T et al: ‘Effect of evaporation and temperature-dependent material properties on molten pool development’. Metallurgical Trans 1991 22B (2) 233-241.
46. Kiselev S N et al: ‘Solving non-linear problems of non-stationary thermoelastoplasticity with special reference to welding and surfacing structural members’. Prikl Fiz 1994 (3) 8-11.
47. Kiselev S N and Toporov V G: ‘Calculating temperature fields when welding plates in non-linear formulation with an allowance made for the distribution of the heat source’. In: ‘Problems of nuclear science and technology’. Publ NIKIMT, Moscow, No. 1(12), 1984, 25-32.
48. Vinokurov V A: ‘Stress relieving welded structures’. Publ Mashinostroenie, Moscow, 1973.
49. Stout R: ‘Postweld heat treatment of pressure vessel steels’. Welding Research Council Bulletin Series 1985 (302) 1-14.
50. Chen P et al: ‘Relaxation stresses in pressure vessels’. Welding Research Council Bulletin Series 1985 (302) 15-22.
51. Wells A: ‘Conference on thermal relaxation treatments of welded structures. General conclusions’. Welding in the World 1988 26(1/2) 26-28.
52. Kiselev S N et al: ‘Stress-strain state of wheels of rolling stock under low-cycle processing and servicing effects’. In: ‘Proc 2nd Int'l Conf: Current problems of railway transport’. 1996.
53. Aladinskii V V et al: ‘Determination of the rational conditions of heat treatment of large welded structures using computer modelling methods’. In: ‘Automatic production control systems and expert systems in welding’. Publ Tula State Technical University, 1995, 123-129.
54. Nemzer G G: Technology of production of large forgings’. Publ Mashinostroenie, Leningrad, 1979.
55. Malinin N N: ‘Applied theory of plasticity and creep’. Publ Mashinostroenie, Moscow, 1968.
56. Kaganov L M: ‘Fundamentals of plasticity theory’. Publ Nauka, Moscow, 1969.
57. Rabotnov Yu N: ‘Creep of structural members’. Publ Nauka, Moscow, 1966.
58. ‘Calculations of strength and evaluation of the service life of elements of PGV-1000U steam generator’. Publ MIIT, Moscow, 1992.
59. Chu C and Jianhua W: ‘Studies on characteristics of welding residual stresses and strains in thick plate’. In: ‘Proc 6th Int'l Conf: Pressure Vessel Technology (Beijing)’. Vol. 2 1988 971-978.
60. Oddy A et al: ‘Consistent strain fields in 3D finite element analysis of welds’. Trans ASME, Journal of Pressure Vessel Technology 1990 112(3) 309-311.
61. Jones B et al: ‘An analytical and experimental study of the effects of welding parameters on fusion welds’. Welding Journal 1993 72 (2) 51s-59s.
62. Jonsson M and Josefson B: ‘Experimentally determined transient and residual stresses in butt-weld pipe’. Journal of Strain Analysis 1988 23 (1) 25-31.
63. Kim Y et al: ‘Mechanical behaviour during SR-treatment of welding residual stress through the thickness’. Trans of JWRI 1990 18 (2) 61-69.
64. Ruud C et al: ‘Residual stress characterisation of thick-plate weldments using X-ray diffraction’. Welding Journal 1993 72 (3) 87s-91s.
65. Ueda Y and Fukuda K: ‘New measuring method of threedimensional residual stresses in long welded joints using inherent strains as parameters - Lz method’. Trans ASME, Journal of Engineering Materials and Technology 1989 111 (1) 1-8.
66. Loshkarev V E: Temperature and stress state of large forgings in cooling during heat treatment’. Dissertation, Leningrad, 1983.
67. Aladinskii V V and Makhanev V O: ‘Local displacements concept and its application to fatigue analysis of non-machined weldments’. In: ‘Proc 5th Int'l Conf on Biaxial/Multiaxial fatigue and fracture’. Vol. 1. Cracow, Poland (Sept 8-12, 1997), 367-378.
68. Technical proposals for reducing the residual stresses in welded joints in eight-axle systems’. Publ MIIT, Moscow, 1996.
69. Ueda Y et al: ‘Three-dimensional numerical simulation of various thermo-mechanical processes by FEM’. 'Report 3’. Trans of J WRI 1993 22 (1) 127-134.
70. ‘Requirement on the geometry of wheels of high-speed rolling stock and manufacturing technology’. Publ MIIT, Moscow, 1997.
71. Makhnenko V I et al: ‘Non-axisymmetric distribution of stresses and residual strains in welding thin-wall cylindrical shells’. Avt Svarka 1993 (4) 3-7.
72. Popova L E and Popov A A: ‘Diagrams of austenite transformations in steels and beta solution in titanium alloys’. Publ’ Metallurgiya, Moscow, 1991.
73. Volchenko V N (ed): ‘Welding and welding materials. Vol. 1 Weldability of Materials’. Publ Metallurgiya, Moscow, 1991.
74. Rybicki E et al: ‘Experimental and computational residual stress evaluation of a weld clad plate and machined test specimens’. Trans ASME, Journal of Engineering Materials and Technology’. 1988 110(4) 297-304.
75. Andersson M and Josefson B: ‘Welding stress redistribution in a butt-welded pipe during later mechanical and thermal loading’. Trans ASME, Journal of Pressure Vessel Technology 1988 110 (4) 402-404.
76. Aladinskii V V et al: ‘Using methods of computer modelling for selecting rational holding time in tempering welded structures of ISKhlMllFL steel’. Svar Proiz 1994 (2) 13-14.
77. Kiselev A S: ‘Increasing the fracture resistance of large components in welding and heat treatment on the basis of analysis of the stress-state by applying rational design-technical solutions’. Dissertation, Moscow, 1990.
78. ‘Examination of the stress-strain state in heat treatment of welded rolls using the theory of non-isothermal yielding with the program of determination of the properties of the materials’. Publ N E Bauman Moscow Higher Technical School, Moscow, 1983.
79. Adamova N A: Thermophysical justification of the heat treatment conditions of larger rolling rolls’. Dissertation, Sverdlovsk, 1986.
80. Loshkarev V E et al: ‘Determination of thermophysical characteristics of steel by solving the inverse problem of thermal conductivity’. Promyshl Teplotekh 1980 2 (3) 22-28.
81. Pokrovskii A M: ‘Development of calculation methods of analysis of ferromechanical processes taking place in large bolts of support rolls of rolling mills in heat treatment’. Publ Moscow, 1989.
82. Loshkarev V E: ‘Mathematical modelling of the process of quenching taking into account the effect of stresses on structural transformations in steel’. MiTOM 1986 (1) 2-6.
83. Loshkarev V E: ‘Calculation of quenching stresses taking into account the ductility of transformation under the effect of stresses on the kinetics of austenite breakdown', lzv Vuz ChernMetall 1988 (1) 111-116.
84. Legun A M: ‘Investigation and development of rational methods of quenching large support rolls for cold rolling in induction heating’. Dissertation, Moscow, 1976.
85. Ueda Y and Yuan M: The characteristics of the source of welding residual stress (inherent strain) and its application to measurement and prediction’. Trans of J WRI 1991 20 (2) 119-127.
86. Ueda Y et al: ‘A predicting method of welding residual stress using source of residual stress’. 'Report 1’. Trans of JWRI 1989 18 (1) 135-141.
87. Ueda Y and Yuan M: ‘A predicting method of welding residual stress using source of residual stress’. 'Report 2’. Trans of JWRI 1989 18 (1) 143-150.
88. Aladinskii V V and Makhanev V O: ‘Using the method of finite elements for solving several non-linear problems of the mechanics of deformed solids’. Publ Institute of Engineering, Academy of Sciences of the USSR, Moscow, 1985.
89. Aladinskii V V: ‘Development of the numerical methods of determining the stress-strain state of welded joints with stress concentration’. Dissertation, Moscow, 1987.
90. Mechanical Engineering. 1994 116 (1-4).
91. Makhnenko VI et al: ‘Results of numerical examination of stresses and displacements in depositing internal surfaces of the body of pumps’. Avt Svarka 1992 (1) 3-6.
92. Makhnenko V I et al: ‘Regulating residual strains in the zones of circular joints of thin-wall rotating shells’. Avt Svarka 19(11-12) 7-9.
93. Nugent R: ‘Finite element thermal analysis’. Welding Journal 1993 72 (8) 67-70.
94. Kiselev S N et al: ‘Effect of technological service thermal effects on the stress-strain state and the service life of wheels of wagons and locomotives’. In: ‘Proc 10th Nat Conf TEMPT-97’. Vol. 2, 1997, 549-553.
95. Kiselev S N et al: ‘Stress-strain state and service life of reconditioned wheels of rolling stock under long-cycle effects’. In: ‘Proc of Conf: Reduction and strengthening of components - modern effective methods of increasing the reliability of machines’. Publ TsRDZ, Moscow, 1997.
96. Aladinskii V V and Makhanev V O: ‘Dy-800 weldments: residual stress modelling and its application to fracture analysis’. In: ‘Proc IV Int Conf on Material Science Problems in NPP Equipment oProduction and Operation, St Petersburg’. Vol. 1, 1996, 50-57.
97. Makhnenko V I: ‘Calculation methods of examining the kinetics of welding stresses and strains’. Publ Naukova dumka, Kiev, 1976.